-- ***************************************************************** -- CISCO-FABRIC-HFR-MIB.my: Cisco Enhanced Benes fabric MIB file -- -- May 2001, Hongchi Shih -- -- Copyright (c) 2001-2003, 2006, 2009 by cisco Systems Inc. -- All rights reserved. -- ***************************************************************** CISCO-FABRIC-HFR-MIB DEFINITIONS ::= BEGIN IMPORTS Unsigned32, Gauge32, Counter32, Counter64, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TimeStamp, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB PhysicalIndex, entPhysicalIndex FROM ENTITY-MIB ciscoMgmt FROM CISCO-SMI; ciscoFabricHfrMIB MODULE-IDENTITY LAST-UPDATED "200904140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-fabric@cisco.com" DESCRIPTION "Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fabric related configuration, state and statistics information. The fabric entities relationship is shown as follows: Acronyms and terms: RP - Routing processor. DRP - Distributed Route Processor. LC - Line card. SFE - switch fabric element. SFE port - the port of SFE contains a transmitter and/or receiver to transmit and/or receive data from backplane. fabric link - Fabric link. +-+ +-+ |T1+=====================================>+R| +-+ single fabric link +-+ A fabric link contains a transmitter T and receiver R. The transmitter T is in the source SFE port of the fabric link and the receiver R is in the destination SFE port of the fabric link. OIM - Optical Interface Module. fabric bundle - Fabric bundle is a cable that contains one or more fabric links for transferring data between fabric cards. +-+ +-+ |A+==================/====================+B| +-+ 1..N fabric links +-+ A fabric bundle cable contains 1 to N fabric links. One end of the fabric bundle cable is plugged into the fabric bundle port A of fabric card in Line card rack and the other end is plugged into the fabric bundle port B on a OIM of fabric rack for the high speed data transfer between fabric bundle port A and B. ingressq - a switch fabric element which queues/segments packets into cells and sends them into fabric. fabricq - a switch fabric element which resequences and reassembles cells from fabric into packets and forwarding them to the egress interface related hardware. fabric plane - Fabric plane is a path from a set of ingressqs in a RP/DRP or LC card to a set of fabricqs in other RP/DRP or LC cards for transferring data between RP, DRP, and LC cards." REVISION "200904140000Z" DESCRIPTION "Added cfhPlaneCapacityThreshold object. Added enum value 'oos' in cfhPlaneOperStatus. Deprecated cfhMIBCompliance statement. Added cfhMIBCompliance1 statement." REVISION "200601010000Z" DESCRIPTION "Replace 'HFR' keyword with 'Enhanced Benes' Replace 'sponge' keyword with 'fabricq' Replace 'sprayer' keyword with 'ingressq'." REVISION "200306090000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 257 } -- The Enhanced Benes fabric MIB consists of the following groups -- [0] Enhanced Benes fabric notification group -- [1] Enhanced Benes fabric general information group -- [2] Enhanced Benes fabric plane group -- [3] fabric bundle group -- [4] fabric bundle port group -- [5] fabric card group cfhMIBNotifications OBJECT IDENTIFIER ::= { ciscoFabricHfrMIB 0 } ciscoFabricHfrMIBObjects OBJECT IDENTIFIER ::= { ciscoFabricHfrMIB 1 } cfhGeneral OBJECT IDENTIFIER ::= { ciscoFabricHfrMIBObjects 1 } cfhPlane OBJECT IDENTIFIER ::= { ciscoFabricHfrMIBObjects 2 } cfhBundle OBJECT IDENTIFIER ::= { ciscoFabricHfrMIBObjects 3 } cfhBundlePort OBJECT IDENTIFIER ::= { ciscoFabricHfrMIBObjects 4 } cfhCard OBJECT IDENTIFIER ::= { ciscoFabricHfrMIBObjects 5 } -- Textual Conventions -- -- -- Fabric Plane ID Textual Conventions CfhPlane ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero, for each fabric plane in the managed system. It is recommended that values are assigned contiguously starting from 1." SYNTAX Unsigned32 (1..4294967295) -- Fabric Bundle ID Textual Conventions CfhBundle ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero, for each fabric bundle in the managed system. It is recommended that values are assigned contiguously starting from 1." SYNTAX Unsigned32 (1..4294967295) -- Fabric administrative state Textual Conventions CfhAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value that provides an indication of the desired administrative state of a fabric entity. up - bring up the fabric entities. down - shut down the fabric entities." SYNTAX INTEGER { up(1), down(2) } CfhScaledPercentage ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention represents scaled percentage values (i.e., percentage values multipled by a power of ten) for error ratio, resource availability/reliability/connectivity usage, etc. The UINTS clause associated with each object that use this textual convention as syntax will indicate the degree of precision up to industry standard five 9's (i.e., 99.999%) requirement." SYNTAX Gauge32 (0..100000) -- Fabric General Information Group cfhGenPlaneStateTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cfhPlaneStateNotification traps should be generated for fabric plane operational status change. If the value of this object is 'true', cfhPlaneStateNotification traps will be generated when a fabric plane operational status transition occurs." DEFVAL { false } ::= { cfhGeneral 1 } cfhGenBundleStateTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether cfhBundleStateNotification traps should be generated for fabric bundle operational status change. If the value of this object is 'true', cfhBundleStateNotification traps will be generated when the cfhBundleOperStatus state transition occurs." DEFVAL { false } ::= { cfhGeneral 2 } cfhGenBundleDownedLinkTrapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether cfhBundleDownedLinkNotification traps should be generated for the downed fabric link in a specific fabric bundle. If the value of this object is 'true', the cfhBundleDownedLinkNotification traps will be generated when the number of downed links in fabric bundle has transitioned from 0 to 1 or from 1 to 0." DEFVAL { false } ::= { cfhGeneral 3 } -- Fabric Plane Group cfhPlaneTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhPlaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table containing information about fabric plane state and statistics in the managed system." ::= { cfhPlane 1 } cfhPlaneEntry OBJECT-TYPE SYNTAX CfhPlaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single fabric plane. An entry of this table is created when the fabric plane related hardware is detected by fabric software in the managed system." INDEX { cfhPlaneId } ::= { cfhPlaneTable 1 } CfhPlaneEntry ::= SEQUENCE { cfhPlaneId CfhPlane, cfhPlaneAdminStatus CfhAdminState, cfhPlaneOperStatus INTEGER, cfhPlaneTotalBundles Unsigned32, cfhPlaneDownedBundles Gauge32 } cfhPlaneId OBJECT-TYPE SYNTAX CfhPlane MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fabric plane identifier. A unique value, greater than zero, for each fabric plane hardware that is detected by the fabric software in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each fabric plane ID must remain constant from one re-initialization of the entity's network management system to the next re-initialization." ::= { cfhPlaneEntry 1 } cfhPlaneAdminStatus OBJECT-TYPE SYNTAX CfhAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether the fabric plane should be brought 'down' or 'up'." ::= { cfhPlaneEntry 2 } cfhPlaneOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), mcastDown(3), oos(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current fabric plane operational status. up - The plane is fully 'up' (i.e., the plane can pass both unicast and multicast traffic). down - The plane is fully 'down' (i.e., th plane can't pass both unicast and multicast traffic). mcastDown - The multicast state of the plane is 'down' (i.e., unicast traffic can pass though the plane but multicast traffic can't). oos - The plane is out of service (i.e., online diag detects the fabric transport media has problem in the plane)." ::= { cfhPlaneEntry 3 } cfhPlaneTotalBundles OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of fabric bundles in the fabric plane." ::= { cfhPlaneEntry 4 } cfhPlaneDownedBundles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of downed fabric bundles in the fabric plane." ::= { cfhPlaneEntry 5 } cfhPlaneStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhPlaneStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table containing statistics information for the fabric planes in the managed system. Discontinuities in the value of all statistics counters in this table might occur if chassis removal or re-initialization occurs in a managed system. The value of cfhPlaneStatsCounterDiscTime is updated when the counter of fabric plane discontinuity occurs." ::= { cfhPlane 2 } cfhPlaneStatsEntry OBJECT-TYPE SYNTAX CfhPlaneStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single fabric plane related statistics." AUGMENTS { cfhPlaneEntry } ::= { cfhPlaneStatsTable 1 } CfhPlaneStatsEntry ::= SEQUENCE { cfhPlaneStatsRxDataCells Counter64, cfhPlaneStatsTxDataCells Counter64, cfhPlaneStatsRxCECells Counter32, cfhPlaneStatsRxUCECells Counter32, cfhPlaneStatsRxPECells Counter32, cfhPlaneStatsUnicastLostCells Counter32, cfhPlaneStatsMulticastLostCells Counter32, cfhPlaneStatsCounterDiscTime TimeStamp } cfhPlaneStatsRxDataCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of data cells have been received by all link receivers for this plane." ::= { cfhPlaneStatsEntry 1 } cfhPlaneStatsTxDataCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of data cells had been transmitted by all link transmitters for this plane." ::= { cfhPlaneStatsEntry 2 } cfhPlaneStatsRxCECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of correctable errored cells had been received by all link receivers for this plane." ::= { cfhPlaneStatsEntry 3 } cfhPlaneStatsRxUCECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of uncorrectable errored cells had been received by all link receivers for this plane." ::= { cfhPlaneStatsEntry 4 } cfhPlaneStatsRxPECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of corrupted cells (e.g., parity error was detected in the cells) have been received by all fabric link receivers for this plane." ::= { cfhPlaneStatsEntry 5 } cfhPlaneStatsUnicastLostCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of unicast cell loss for this plane. The lost cells are ones that had to be dropped because of queue overflow, or some such reason." ::= { cfhPlaneStatsEntry 6 } cfhPlaneStatsMulticastLostCells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of multicast cell loss for this plane. The lost cells are ones that had to be dropped because of queue overflow, or some such reason." ::= { cfhPlaneStatsEntry 7 } cfhPlaneStatsCounterDiscTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which all of fabric plane's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { cfhPlaneStatsEntry 8 } cfhPlaneCapacityThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the minimum required number of fabric planes whose cfhPlaneOperStatus value is 'up' in order for the system to be considered fully operational." ::= { cfhPlane 3 } -- Enhanced Benes fabric bundle Table cfhBundleTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of fabric bundles in the managed system." ::= { cfhBundle 1 } cfhBundleDowned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of downed fabric bundles in the managed system." ::= { cfhBundle 2 } cfhBundleTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table containing information about fabric bundle state and statistics in the managed system." ::= { cfhBundle 3 } cfhBundleEntry OBJECT-TYPE SYNTAX CfhBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single fabric bundle. An entry of this table is created when the fabric bundle related hardware is detected by fabric software in the managed system." INDEX { cfhBundleId } ::= { cfhBundleTable 1 } CfhBundleEntry ::= SEQUENCE { cfhBundleId CfhBundle, cfhBundleName SnmpAdminString, cfhBundlePlane CfhPlane, cfhBundleOperStatus INTEGER, cfhBundleTotalLinks Unsigned32, cfhBundleDownedLinks Gauge32, cfhBundlePortLCRCardIndex PhysicalIndex, cfhBundlePortLCRId Unsigned32, cfhBundlePortSecondCardIndex PhysicalIndex, cfhBundlePortSecondId Unsigned32 } cfhBundleId OBJECT-TYPE SYNTAX CfhBundle MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fabric bundle identifier. A unique value, greater than zero, for each fabric bundle hardware that is detected by the fabric software in the managed system." ::= { cfhBundleEntry 1 } cfhBundleName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface. The value of this object should be the name of the fabric bundle as assigned by the fabric software and should be suitable for use in commands entered at the device's `console' The bundle name is a location string with the following syntax ///. Where is line card rack, is the fabric card slot, is fabric module and is the bundle connector on the fabric card ofnor OIM" ::= { cfhBundleEntry 2 } cfhBundlePlane OBJECT-TYPE SYNTAX CfhPlane MAX-ACCESS read-only STATUS current DESCRIPTION "The fabric bundle associated fabric plane." ::= { cfhBundleEntry 3 } cfhBundleOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current fabric bundle operational status." ::= { cfhBundleEntry 4 } cfhBundleTotalLinks OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total fabric links in the fabric bundle." ::= { cfhBundleEntry 5 } cfhBundleDownedLinks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of downed fabric links in the fabric bundle." ::= { cfhBundleEntry 6 } cfhBundlePortLCRCardIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The physical entity index of fabric card in the line card rack for the line card rack bundle port of the fabric bundle." ::= { cfhBundleEntry 7 } cfhBundlePortLCRId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The fabric bundle port identifier of the physical fabric bundle port that is on the cfhBundlePortLCRCardIndex associated fabric card." ::= { cfhBundleEntry 8 } cfhBundlePortSecondCardIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The physical entity index of OIM in the fabric rack or fabric card in line card rack (only apply to a two line card racks system) for the second bundle port of the fabric bundle." ::= { cfhBundleEntry 9 } cfhBundlePortSecondId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The second fabric bundle port id of the physical fabric bundle port that is on the cfhBundlePort2CardIndex associated fabric card." ::= { cfhBundleEntry 10 } cfhBundlePortTotalNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of fabric bundle ports in the managed system." ::= { cfhBundlePort 1 } -- Enhanced Benes fabric bundle port Table cfhBundlePortTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhBundlePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per fabric bundle port that contains the port state and the aggregation information of traffic and error statistics. The total number of fabric bundle ports is given by the value of cdfhBundlePortNumber." ::= { cfhBundlePort 2 } cfhBundlePortEntry OBJECT-TYPE SYNTAX CfhBundlePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a fabric bundle port. An entry of this table is created when a fabric bundle port is detected by the fabric software. The entry is removed when the fabric bundle port associated card is removed." INDEX { entPhysicalIndex, cfhBundlePortId } ::= { cfhBundlePortTable 1 } CfhBundlePortEntry ::= SEQUENCE { cfhBundlePortId Unsigned32, cfhBundlePortAdminState CfhAdminState, cfhBundlePortOperState INTEGER, cfhBundlePortGrpId CfhBundle } cfhBundlePortId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each fabric bundle port on a fabric card or OIM." ::= { cfhBundlePortEntry 1 } cfhBundlePortAdminState OBJECT-TYPE SYNTAX CfhAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The object controls whether the fabric bundle port should be brought 'up' or shut 'down' administratively. up - bring up all fabric link transmitters and/or receivers of the fabric bundle port. down - shut down all fabric link transmitters and/or receivers of the fabric bundle port." ::= { cfhBundlePortEntry 3 } cfhBundlePortOperState OBJECT-TYPE SYNTAX INTEGER { unknown(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the operational state of the fabric bundle port. unknown - the bundle port state is unknown or in the transition between 'up' and 'down' state. up - bundle port operates normally down - bundle port was downed due to error condition or administratively shutdown." ::= { cfhBundlePortEntry 4 } cfhBundlePortGrpId OBJECT-TYPE SYNTAX CfhBundle MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of a fabric bundle that is associated to this fabric bundle port." ::= { cfhBundlePortEntry 5 } cfhBundlePortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhBundlePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the traffic and error statistics for fabric bundle ports." ::= { cfhBundlePort 3 } cfhBundlePortStatsEntry OBJECT-TYPE SYNTAX CfhBundlePortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a fabric bundle port statistics." AUGMENTS { cfhBundlePortEntry } ::= { cfhBundlePortStatsTable 1 } CfhBundlePortStatsEntry ::= SEQUENCE { cfhBundlePortStatsRxDataCells Counter64, cfhBundlePortStatsTxDataCells Counter64, cfhBundlePortStatsRxCECells Counter32, cfhBundlePortStatsRxUCECells Counter32, cfhBundlePortStatsRxPECells Counter32, cfhBundlePortStatsHighRxCECells Gauge32, cfhBundlePortStatsHighRxUCECells Gauge32, cfhBundlePortStatsHighRxPECells Gauge32 } cfhBundlePortStatsRxDataCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of data cells have been received by all link receivers for this port." ::= { cfhBundlePortStatsEntry 1 } cfhBundlePortStatsTxDataCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of data cells had been transmitted by all link transmitters for this port." ::= { cfhBundlePortStatsEntry 2 } cfhBundlePortStatsRxCECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of correctable errored cells had been received by all link receivers for this port." ::= { cfhBundlePortStatsEntry 3 } cfhBundlePortStatsRxUCECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of uncorrectable errored cells had been received by all link receivers for this port." ::= { cfhBundlePortStatsEntry 4 } cfhBundlePortStatsRxPECells OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of corrupted cells (e.g., parity error was detected in the cells) have been received by all link receivers for this port." ::= { cfhBundlePortStatsEntry 5 } cfhBundlePortStatsHighRxCECells OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest accumulated number of correctable errored cells that has been received on any single link in the port." ::= { cfhBundlePortStatsEntry 6 } cfhBundlePortStatsHighRxUCECells OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest accumulated number of uncorrectable errored cells that has been received on any single link in the port." ::= { cfhBundlePortStatsEntry 7 } cfhBundlePortStatsHighRxPECells OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest accumulated number of corrupted cells (e.g., parity error was detected in the cells) that has been received on any single link in the port." ::= { cfhBundlePortStatsEntry 8 } cfhCardTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of fabric connection capable cards for tracking fabric related status, usage and statistics in the system." ::= { cfhCard 1 } cfhCardEntry OBJECT-TYPE SYNTAX CfhCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a fabric inuse state and statistics. An entry of this table is created when a fabric connection capable card is detected in the system. The entry of this table is deleted when the card is removed from the managed system." INDEX { entPhysicalIndex } ::= { cfhCardTable 1 } CfhCardEntry ::= SEQUENCE { cfhCardFabInUse TruthValue, cfhCardFabUsage CfhScaledPercentage, cfhCardFabInUseDiscTime TimeStamp } cfhCardFabInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if the fabric is in use by the card (i.e., the card can sustain the fabric control traffic via one or more fabric planes of the card). If the value of this object is 'true', then the fabric is in use by the card, otherwise it is not." ::= { cfhCardEntry 1 } cfhCardFabUsage OBJECT-TYPE SYNTAX CfhScaledPercentage UNITS "thousandths of a percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The scaled percentage of elapsed time that the fabric has been in use by the card (has sustained fabric control traffic to the fabric) over the time interval since the last 'discontinuity' in its measurement time. That is, the interval is restarted whenever the value of cfhCardFabInUseDiscTime is changed." ::= { cfhCardEntry 2 } cfhCardFabInUseDiscTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which the cfhCardFabUsage (fabric inuse usage) suffered a discontinuity in its measurement. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { cfhCardEntry 3 } cfhCardPlaneTable OBJECT-TYPE SYNTAX SEQUENCE OF CfhCardPlaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the connectivity information of a card to a fabric plane in a system." ::= { cfhCard 2 } cfhCardPlaneEntry OBJECT-TYPE SYNTAX CfhCardPlaneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding the connectivity of a card to a fabric plane. An entry of this table is created when the card associated fabric plane is detected by the fabric software. The entry of this table is deleted when the card is removed from the managed system." INDEX { entPhysicalIndex, cfhPlaneId } ::= { cfhCardPlaneTable 1 } CfhCardPlaneEntry ::= SEQUENCE { cfhCardPlaneTxConnectivity TruthValue, cfhCardPlaneRxConnectivity TruthValue } cfhCardPlaneTxConnectivity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if a card can transmit data via a fabric plane on the card. If the value of this object is 'true', the card can transmit data via the fabric plane; otherwise it is not." ::= { cfhCardPlaneEntry 1 } cfhCardPlaneRxConnectivity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates if a card can receive data via a fabric plane on the card. If the value of this object is 'true', the card can transfer data via the fabric plane; otherwise it is not." ::= { cfhCardPlaneEntry 2 } -- ******************************************************************* -- Notifications -- ******************************************************************* cfhPlaneStateNotification NOTIFICATION-TYPE OBJECTS { cfhPlaneOperStatus } STATUS current DESCRIPTION "Fabric plane operational state change notification. This notification is sent when the fabric plane operational state transition occurs." ::= { cfhMIBNotifications 1 } cfhBundleStateNotification NOTIFICATION-TYPE OBJECTS { cfhBundleOperStatus, cfhBundlePlane, cfhBundleName } STATUS current DESCRIPTION "Fabric bundle operational state change notification. This notification is sent when the cfhBundleOperStatus state transition occurs." ::= { cfhMIBNotifications 2 } cfhBundleDownedLinkNotification NOTIFICATION-TYPE OBJECTS { cfhBundleOperStatus, cfhBundlePlane, cfhBundleDownedLinks, cfhBundleName } STATUS current DESCRIPTION "Fabric bundle link notification. This notification is sent if the value of cfhBundleOperStatus is 'up' and the value of cfhBundleDownedLinks is changed from 0 to nonzero or from non-zero to zero." ::= { cfhMIBNotifications 3 } cfhMIBConformance OBJECT IDENTIFIER ::= { ciscoFabricHfrMIB 3 } cfhMIBCompliances OBJECT IDENTIFIER ::= { cfhMIBConformance 1 } cfhMIBGroups OBJECT IDENTIFIER ::= { cfhMIBConformance 2 } -- compliance statements cfhMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-FABRIC-HFR-MIB" MODULE -- this module MANDATORY-GROUPS { cfhGenInfoGroup, cfhPlaneGroup, cfhBundleGroup, cfhBundlePortGroup, cfhCardGroup } GROUP cfhNotificationsGroup DESCRIPTION "This group is mandatory for the system that supports fabric plane and bundle features." ::= { cfhMIBCompliances 1 } cfhMIBCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-FABRIC-HFR-MIB" MODULE -- this module MANDATORY-GROUPS { cfhGenInfoGroup, cfhPlaneGroup, cfhBundleGroup, cfhBundlePortGroup, cfhCardGroup } GROUP cfhNotificationsGroup DESCRIPTION "This group is mandatory for the system that supports fabric plane and bundle features." GROUP cfhFabricCapacityGroup DESCRIPTION "This group is mandatory for the system that supports fabric plane features." ::= { cfhMIBCompliances 2 } -- units of conformance cfhGenInfoGroup OBJECT-GROUP OBJECTS { cfhGenPlaneStateTrapEnable, cfhGenBundleStateTrapEnable, cfhGenBundleDownedLinkTrapEnable } STATUS current DESCRIPTION "A collection of objects providing the general Enhanced Benes fabric related configuration and statistics capability." ::= { cfhMIBGroups 1 } cfhPlaneGroup OBJECT-GROUP OBJECTS { cfhPlaneAdminStatus, cfhPlaneOperStatus, cfhPlaneTotalBundles, cfhPlaneDownedBundles, cfhPlaneStatsRxDataCells, cfhPlaneStatsTxDataCells, cfhPlaneStatsRxCECells, cfhPlaneStatsRxUCECells, cfhPlaneStatsRxPECells, cfhPlaneStatsUnicastLostCells, cfhPlaneStatsMulticastLostCells, cfhPlaneStatsCounterDiscTime } STATUS current DESCRIPTION "A collection of objects providing the fabric plane statistics information." ::= { cfhMIBGroups 2 } cfhBundleGroup OBJECT-GROUP OBJECTS { cfhBundleTotal, cfhBundleDowned, cfhBundleName, cfhBundlePlane, cfhBundleOperStatus, cfhBundleTotalLinks, cfhBundleDownedLinks, cfhBundlePortLCRCardIndex, cfhBundlePortLCRId, cfhBundlePortSecondCardIndex, cfhBundlePortSecondId } STATUS current DESCRIPTION "A collection of objects providing the fabric bundle state and statistics information." ::= { cfhMIBGroups 3 } cfhBundlePortGroup OBJECT-GROUP OBJECTS { cfhBundlePortTotalNumber, cfhBundlePortAdminState, cfhBundlePortOperState, cfhBundlePortGrpId, cfhBundlePortStatsRxDataCells, cfhBundlePortStatsTxDataCells, cfhBundlePortStatsRxCECells, cfhBundlePortStatsRxUCECells, cfhBundlePortStatsRxPECells, cfhBundlePortStatsHighRxCECells, cfhBundlePortStatsHighRxUCECells, cfhBundlePortStatsHighRxPECells } STATUS current DESCRIPTION "A collection of objects providing the fabric bundle Port state and statistics information." ::= { cfhMIBGroups 4 } cfhCardGroup OBJECT-GROUP OBJECTS { cfhCardFabInUse, cfhCardFabUsage, cfhCardFabInUseDiscTime, cfhCardPlaneTxConnectivity, cfhCardPlaneRxConnectivity } STATUS current DESCRIPTION "A collection of objects providing the fabric connectivity management information." ::= { cfhMIBGroups 5 } cfhNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { cfhPlaneStateNotification, cfhBundleStateNotification, cfhBundleDownedLinkNotification } STATUS current DESCRIPTION "The notifications of ciscoFabricHfrMIB that are required to implement." ::= { cfhMIBGroups 6 } cfhFabricCapacityGroup OBJECT-GROUP OBJECTS { cfhPlaneCapacityThreshold } STATUS current DESCRIPTION "A collection of objects providing the fabric capacity management information." ::= { cfhMIBGroups 7 } END