-- This file was included in WWP MIB release 04-16-00-0047 -- -- CIENA-CES-MODULE-MIB.my -- CIENA-CES-MODULE-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, TimeTicks, Unsigned32, NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF cienaGlobalSeverity, cienaGlobalMacAddress FROM CIENA-GLOBAL-MIB CienaGlobalState FROM CIENA-TC cienaCesNotifications, cienaCesConfig FROM CIENA-SMI; cienaCesModuleMIB MODULE-IDENTITY LAST-UPDATED "201401230000Z" ORGANIZATION "Ciena Corp." CONTACT-INFO " Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "This module defines the module configuration objects and also the objects required for module related notifications." REVISION "201401230000Z" DESCRIPTION "Augmented TceHealthCategory TEXTUAL-CONVENTION with the following enumerations: powerParams(34), powerOutputVoltage(35)" REVISION "201312050000Z" DESCRIPTION "Augmented TceHealthCategory TEXTUAL-CONVENTION with the following enumerations: smFabric(30), spi(31), slotResource(32), tempIom(33). Augmented cienaCesModuleResourceHealthSubCategory with the following enumerations: pltfmLmPowerBudget(22), pltfmPpIngressL2Xform(23), pltfmPpEgressL2Xform(24), pltfmPpInternalTcam(25), pltfmNpMaintPoint(26), pltfmNpMaintPointSession(27), pltfmNpFastTimer300Hz(28), pltfmNpFastTimer10msec(29), pltfmNpFastTimer100msec(30), pltfmNpFastTimer1sec(31), pltfmNpSlowTimer(32), pltfmNpWatchdogTimer(33), pltfmNpProtectionGroup(34)." REVISION "201304160000Z" DESCRIPTION " Added cienaCesModuleSlotName to the cienaCesModuleEntry" REVISION "201303280000Z" DESCRIPTION " Added cienaCesModuleIDPTable ." REVISION "201303070000Z" DESCRIPTION " Changed cienaCesModuleHealthStatusNormalNotification to cienaCesModuleHealthStatusGoodNotification." REVISION "201208230000Z" DESCRIPTION " Changed cienaCesModuleOperState enum hitlessReinit to hitlessInit." REVISION "201206280000Z" DESCRIPTION " Added pltfmBscp, pltfmHighRateTokenBucket, pltfmLowRateTokenBucket, pltfmParentMeter, pltfmChildMeter, pltfmL2UserTypes, and logicalInterfaces to cienaCesModuleResourceHealthSubCategory." REVISION "201206140000Z" DESCRIPTION " Added usbFlash and linxstats to TceHealthCategory." REVISION "201106060000Z" DESCRIPTION " Added new traps cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification, cienaCesModuleSwitchFabricDisruptedRecoverableNotification." REVISION "201012130000Z" DESCRIPTION "cienaCesModulePOSTErrorTable has been modified and new objects were added." REVISION "201005100000Z" DESCRIPTION "Initial creation." ::= { cienaCesConfig 2 } -- -- Node definitions -- cienaCesModuleMIBObjects OBJECT IDENTIFIER ::= { cienaCesModuleMIB 1 } cienaCesModuleNotifAttrs OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 3 } cienaCesModuleGlobal OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 1 } cienaCesModule OBJECT IDENTIFIER ::= { cienaCesModuleMIBObjects 2 } cienaCesSwModule OBJECT IDENTIFIER ::= { cienaCesModule 4 } cienaCesModuleMIBNotificationPrefix OBJECT IDENTIFIER ::= { cienaCesNotifications 3 } cienaCesModuleMIBNotifications OBJECT IDENTIFIER ::= { cienaCesModuleMIBNotificationPrefix 0 } -- --Conformance -- cienaCesModuleConformance OBJECT IDENTIFIER ::= { cienaCesModuleMIB 2 } cienaCesModuleMIBCompliances OBJECT IDENTIFIER ::= { cienaCesModuleConformance 1 } cienaCesModuleMIBGroups OBJECT IDENTIFIER ::= { cienaCesModuleConformance 2 } -- -- Textual convention -- SwPkgStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Last Xgrade command operational state." SYNTAX INTEGER { unknown(0), good(1), invalid(2), loading(3), syncing(4), waiting(5), burning(6), empty(7) } SwModuleState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Xgrade state." SYNTAX INTEGER { installing(1), booting(2), initializing(3), good(4), failed(5), disabled(6), empty(7), unsupported(8), unknown(9) } TceHealthCategory ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "CES system health categories." SYNTAX INTEGER { unknown(1), cpu(2), datapath(3), ethernet(4), fabric(5), sm(6), tempSm(7), samplesSm(8), disk(9), tempModule(10), samplesModule(11), fanTray(12), fanTraySpeedMismatch(13), fanSpeedMismatch(14), tempFan(15), samplesFan(16), fanRpm(17), power(18), feedPower(19), systemResource(20), memory(21), mac(22), i2c(23), flash(24), transceiver(25), link(26), iomStatus(27), usbFlash(28), linxstats(29), smFabric(30), spi(31), slotResource(32), tempIom(33), powerParams(34), powerOutputVoltage(35) } TceHealthStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "CES system health status code." SYNTAX INTEGER { unknown(1), normal(2), warning(3), degraded(4), faulted(5) } HealthOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Origin of the resource." SYNTAX INTEGER { none(0), chassis(1), slot(2), port(3), unit(4) } -- -- Global parameters -- cienaCesModuleGlobalPostState OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the global POST state for the system." ::= { cienaCesModuleGlobal 1 } -- -- The Module Table -- cienaCesModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the modules configured and detected." ::= { cienaCesModule 1 } cienaCesModuleEntry OBJECT-TYPE SYNTAX CienaCesModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleTable." INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx } ::= { cienaCesModuleTable 1 } CienaCesModuleEntry ::= SEQUENCE { cienaCesModuleChassisIndx Unsigned32, cienaCesModuleShelfIndx Unsigned32, cienaCesModuleSlotIndx Unsigned32, cienaCesModuleModel DisplayString, cienaCesModuleType INTEGER, cienaCesModuleDescription DisplayString, cienaCesModuleAdminState INTEGER, cienaCesModuleOperState INTEGER, cienaCesModuleProtectionRole INTEGER, cienaCesModuleStandbyStatus INTEGER, cienaCesModuleLastRebootReason INTEGER, cienaCesModuleAdminPostState INTEGER, cienaCesModuleOperPostState INTEGER, cienaCesModuleTrapState CienaGlobalState, cienaCesModuleChassisNotifIndx Unsigned32, cienaCesModuleShelfNotifIndx Unsigned32, cienaCesModuleSlotNotifIndx Unsigned32, cienaCesModuleSlotName DisplayString } cienaCesModuleChassisIndx OBJECT-TYPE SYNTAX Unsigned32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the chassis index for the module." ::= { cienaCesModuleEntry 1 } cienaCesModuleShelfIndx OBJECT-TYPE SYNTAX Unsigned32 (0..992) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the shelf index for the module." ::= { cienaCesModuleEntry 2 } cienaCesModuleSlotIndx OBJECT-TYPE SYNTAX Unsigned32 (1..38) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the slot index for the module." ::= { cienaCesModuleEntry 3 } cienaCesModuleModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module model." ::= { cienaCesModuleEntry 4 } cienaCesModuleType OBJECT-TYPE SYNTAX INTEGER { invalid(0), unknown(1), ctm(2), lm(3), sm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether this is a single module, control timing module, I/O module or fabric module." ::= { cienaCesModuleEntry 5 } cienaCesModuleDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the description of the module." ::= { cienaCesModuleEntry 6 } cienaCesModuleAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), shutdown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the administrative state of the module." DEFVAL { enabled } ::= { cienaCesModuleEntry 7 } cienaCesModuleOperState OBJECT-TYPE SYNTAX INTEGER { uninstalled(1), unequipped(2), init(3), disabled(4), enabled(5), faulted(6), hotswap(7), poweroff(8), hitlessInit(9), fastReload(10), krnInit(11), unsupported(12), installing(13), failed(14), krnDisable(15), appFault(16), booting(17), powerdown(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational state of the module." ::= { cienaCesModuleEntry 8 } cienaCesModuleProtectionRole OBJECT-TYPE SYNTAX INTEGER { none(1), primary(2), secondary(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the redundant administrative state of the module." ::= { cienaCesModuleEntry 9 } cienaCesModuleStandbyStatus OBJECT-TYPE SYNTAX INTEGER { none(0), cold(1), warm(2), hot(3), protected(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the standby status of the module." ::= { cienaCesModuleEntry 10 } cienaCesModuleLastRebootReason OBJECT-TYPE SYNTAX INTEGER { unknown(1), snmp(2), pwrFail(3), appLoad(4), errorHandler(5), watchdog(6), upgrade(7), cli(8), resetButton(9), failOver(10), faultManager(11), communicationFailure(12), configurationRevert(13), unprotectedFailure(14), bootFailure(15), softwareRevert(16), processorWarmRestart(17), coldRestart(18), primaryRestart(19) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the last reboot reason of the module." ::= { cienaCesModuleEntry 11 } cienaCesModuleAdminPostState OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object sets the POST administrative state for the given module." ::= { cienaCesModuleEntry 12 } cienaCesModuleOperPostState OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the POST operational state for the given module." ::= { cienaCesModuleEntry 13} cienaCesModuleTrapState OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the device generates notifications for this module." DEFVAL { enabled } ::= { cienaCesModuleEntry 16 } cienaCesModuleChassisNotifIndx OBJECT-TYPE SYNTAX Unsigned32 (1..1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the chassis index for the module used in trap definition." ::= { cienaCesModuleEntry 17 } cienaCesModuleShelfNotifIndx OBJECT-TYPE SYNTAX Unsigned32 (0..992) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the shelf index for the module used in trap definition." ::= { cienaCesModuleEntry 18 } cienaCesModuleSlotNotifIndx OBJECT-TYPE SYNTAX Unsigned32 (1..38) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the slot index for the module used in trap definition." ::= { cienaCesModuleEntry 19 } cienaCesModuleSlotName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the slot name that the module is installed in." ::= { cienaCesModuleEntry 20 } -- -- The Module Description Table -- cienaCesModuleDescriptionTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the description of physical attributes of the modules." ::= { cienaCesModule 2 } cienaCesModuleDescriptionEntry OBJECT-TYPE SYNTAX CienaCesModuleDescriptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleDescriptionTable." INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx } ::= { cienaCesModuleDescriptionTable 1 } CienaCesModuleDescriptionEntry ::= SEQUENCE { cienaCesModuleDescriptionBoardName DisplayString, cienaCesModuleDescriptionBoardPartNum DisplayString, cienaCesModuleDescriptionBoardSerialNum DisplayString, cienaCesModuleDescriptionBoardDesc DisplayString, cienaCesModuleDescriptionHwVersion DisplayString, cienaCesModuleDescriptionMfgDate DisplayString, cienaCesModuleDescriptionBaseMac MacAddress, cienaCesModuleDescriptionUpTime TimeTicks, cienaCesModuleDescriptionTotalNumPorts Integer32 } cienaCesModuleDescriptionBoardName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module name." ::= { cienaCesModuleDescriptionEntry 1 } cienaCesModuleDescriptionBoardPartNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the board part number." ::= { cienaCesModuleDescriptionEntry 2 } cienaCesModuleDescriptionBoardSerialNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the board serial number." ::= { cienaCesModuleDescriptionEntry 3 } cienaCesModuleDescriptionBoardDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the board description." ::= { cienaCesModuleDescriptionEntry 4 } cienaCesModuleDescriptionHwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module hardware version." ::= { cienaCesModuleDescriptionEntry 5 } cienaCesModuleDescriptionMfgDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module manufacturing date." ::= { cienaCesModuleDescriptionEntry 6 } cienaCesModuleDescriptionBaseMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module base MAC address." ::= { cienaCesModuleDescriptionEntry 7 } cienaCesModuleDescriptionUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module up time (in hundredths of a second) since the module was last re-initialized." ::= { cienaCesModuleDescriptionEntry 8 } cienaCesModuleDescriptionTotalNumPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of ports on this module." ::= { cienaCesModuleDescriptionEntry 9 } -- -- The Module IDP Table -- cienaCesModuleIDPTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleIDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the description of ID Prom contents of the modules." ::= { cienaCesModule 8 } cienaCesModuleIDPEntry OBJECT-TYPE SYNTAX CienaCesModuleIDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleIDPTable." INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx } ::= { cienaCesModuleIDPTable 1 } CienaCesModuleIDPEntry ::= SEQUENCE { cienaCesModuleIDPEthBaseMac MacAddress, cienaCesModuleIDPEthBaseMacRange Integer32, cienaCesModuleIDPModuleSerialNumber DisplayString, cienaCesModuleIDPModelPartNumber DisplayString, cienaCesModuleIDPModelRevision DisplayString, cienaCesModuleIDPProductID DisplayString, cienaCesModuleIDPMfgDate DisplayString, cienaCesModuleIDPCleiCode DisplayString, cienaCesModuleIDPBarcode DisplayString, cienaCesModuleIDPSWCompat Integer32, cienaCesModuleIDPFTC Integer32 } cienaCesModuleIDPEthBaseMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module Ethernet Base MAC address stored in the module IDP." ::= { cienaCesModuleIDPEntry 1 } cienaCesModuleIDPEthBaseMacRange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Ethernet MAC address range stored in the module IDP." ::= { cienaCesModuleIDPEntry 2 } cienaCesModuleIDPModuleSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Module Serial Number stored in the module IDP." ::= { cienaCesModuleIDPEntry 3 } cienaCesModuleIDPModelPartNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Model Part Number stored in the module IDP." ::= { cienaCesModuleIDPEntry 4 } cienaCesModuleIDPModelRevision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Model Revision stored in the module IDP." ::= { cienaCesModuleIDPEntry 5 } cienaCesModuleIDPProductID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Module Product ID stored in the module IDP." ::= { cienaCesModuleIDPEntry 6 } cienaCesModuleIDPMfgDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Manufactured Date stored in the module IDP." ::= { cienaCesModuleIDPEntry 7 } cienaCesModuleIDPCleiCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the CLEI Code stored in the module IDP." ::= { cienaCesModuleIDPEntry 8 } cienaCesModuleIDPBarcode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Barcode stored in the module IDP." ::= { cienaCesModuleIDPEntry 9 } cienaCesModuleIDPSWCompat OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Software Compatibility Number stored in the module IDP." ::= { cienaCesModuleIDPEntry 10 } cienaCesModuleIDPFTC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Functional Test Count stored in the module IDP." ::= { cienaCesModuleIDPEntry 11 } -- -- Module Temperature sensors -- cienaCesModuleTempSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the temperature sensors of the modules." ::= { cienaCesModule 3 } cienaCesModuleTempSensorEntry OBJECT-TYPE SYNTAX CienaCesModuleTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleTempSensorTable." INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx, cienaCesModuleSensorIndx } ::= { cienaCesModuleTempSensorTable 1 } CienaCesModuleTempSensorEntry ::= SEQUENCE { cienaCesModuleSensorIndx Integer32, cienaCesModuleSensorDescription DisplayString, cienaCesModuleSensorCurrentTemp Integer32, cienaCesModuleSensorHighTemp Integer32, cienaCesModuleSensorLowTemp Integer32, cienaCesModuleSensorHighTempThreshold Integer32, cienaCesModuleSensorLowTempThreshold Integer32, cienaCesModuleSensorNotifIndx Integer32 } cienaCesModuleSensorIndx OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the unique index in the table along with cienaCesModuleIndx." ::= { cienaCesModuleTempSensorEntry 1 } cienaCesModuleSensorDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the sensor description." ::= { cienaCesModuleTempSensorEntry 2 } cienaCesModuleSensorCurrentTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current temperature of the module." ::= { cienaCesModuleTempSensorEntry 3 } cienaCesModuleSensorHighTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the highest temperature this module has reached since the last reboot." ::= { cienaCesModuleTempSensorEntry 4 } cienaCesModuleSensorLowTemp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the lowest temperature this module has reached since the last reboot" ::= { cienaCesModuleTempSensorEntry 5 } cienaCesModuleSensorHighTempThreshold OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the high threshold for this module temperature." ::= { cienaCesModuleTempSensorEntry 6 } cienaCesModuleSensorLowTempThreshold OBJECT-TYPE SYNTAX Integer32 (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the low threshold for this module temperature." ::= { cienaCesModuleTempSensorEntry 7 } cienaCesModuleSensorNotifIndx OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the unique index in the table used for trap definition." ::= { cienaCesModuleTempSensorEntry 8 } -- -- Module Software package -- cienaCesGlobalSwState OBJECT-TYPE SYNTAX INTEGER { idle(1), downloading(2), installing(3), activating(4), validating(5), reverting(6), running(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The global software state of the system." ::= { cienaCesSwModule 1 } cienaCesModuleSwTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the software package attributes on the modules." ::= { cienaCesSwModule 2 } cienaCesModuleSwEntry OBJECT-TYPE SYNTAX CienaCesModuleSwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleSwTable. " INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx } ::= { cienaCesModuleSwTable 1 } CienaCesModuleSwEntry ::= SEQUENCE { cienaCesModuleSwState SwModuleState, cienaCesModuleSwRunningRelease DisplayString, cienaCesModuleSwRunningReleasePartition Unsigned32, cienaCesModuleSwReleasePartition0Pkg DisplayString, cienaCesModuleSwReleasePartition0PkgStatus SwPkgStatus, cienaCesModuleSwReleasePartition1Pkg DisplayString, cienaCesModuleSwReleasePartition1PkgStatus SwPkgStatus, cienaCesModuleSwReleasePartition2Pkg DisplayString, cienaCesModuleSwReleasePartition2PkgStatus SwPkgStatus, cienaCesModuleSwBank0KernelVersion DisplayString, cienaCesModuleSwBank0KernelStatus SwPkgStatus, cienaCesModuleSwBank1KernelVersion DisplayString, cienaCesModuleSwBank1KernelStatus SwPkgStatus, cienaCesModuleSwBank0UbootVersion DisplayString, cienaCesModuleSwBank0UbootStatus SwPkgStatus, cienaCesModuleSwBank1UbootVersion DisplayString, cienaCesModuleSwBank1UbootStatus SwPkgStatus, cienaCesModuleSwUbootGoldVersion DisplayString, cienaCesModuleSwUbootGoldStatus SwPkgStatus, cienaCesModuleSwMIBVer DisplayString } cienaCesModuleSwState OBJECT-TYPE SYNTAX SwModuleState MAX-ACCESS read-only STATUS current DESCRIPTION "The software state on the module." ::= { cienaCesModuleSwEntry 1 } cienaCesModuleSwRunningRelease OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Software package version that is currently running on the module." ::= { cienaCesModuleSwEntry 2 } cienaCesModuleSwRunningReleasePartition OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition where the current running release is installed." ::= { cienaCesModuleSwEntry 3 } cienaCesModuleSwReleasePartition0Pkg OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 0 software package version." ::= { cienaCesModuleSwEntry 4 } cienaCesModuleSwReleasePartition0PkgStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 0 software package status." ::= { cienaCesModuleSwEntry 5 } cienaCesModuleSwReleasePartition1Pkg OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 1 software package version." ::= { cienaCesModuleSwEntry 6 } cienaCesModuleSwReleasePartition1PkgStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 1 software package status." ::= { cienaCesModuleSwEntry 7 } cienaCesModuleSwReleasePartition2Pkg OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 2 software package version." ::= { cienaCesModuleSwEntry 8 } cienaCesModuleSwReleasePartition2PkgStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Release partition 2 software package status." ::= { cienaCesModuleSwEntry 9 } cienaCesModuleSwBank0KernelVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bank0 kernel version." ::= { cienaCesModuleSwEntry 10 } cienaCesModuleSwBank0KernelStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bank0 kernel software status." ::= { cienaCesModuleSwEntry 11 } cienaCesModuleSwBank1KernelVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bank1 kernel version." ::= { cienaCesModuleSwEntry 12 } cienaCesModuleSwBank1KernelStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bank1 kernel status." ::= { cienaCesModuleSwEntry 13 } cienaCesModuleSwBank0UbootVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bank0 U-boot version." ::= { cienaCesModuleSwEntry 14 } cienaCesModuleSwBank0UbootStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bank0 U-boot status. " ::= { cienaCesModuleSwEntry 15 } cienaCesModuleSwBank1UbootVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bank1 U-boot version." ::= { cienaCesModuleSwEntry 16 } cienaCesModuleSwBank1UbootStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Bank0 U-boot status. " ::= { cienaCesModuleSwEntry 17 } cienaCesModuleSwUbootGoldVersion OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "U-boot Gold version." ::= { cienaCesModuleSwEntry 18 } cienaCesModuleSwUbootGoldStatus OBJECT-TYPE SYNTAX SwPkgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "U-boot Gold status. " ::= { cienaCesModuleSwEntry 19 } cienaCesModuleSwMIBVer OBJECT-TYPE SYNTAX DisplayString(SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This MIB object shows the MIB version currently supported." ::= { cienaCesModuleSwEntry 20 } -- -- Module POST errors -- cienaCesModulePOSTErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModulePOSTErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table for viewing POST error on the modules." ::= { cienaCesModule 5 } cienaCesModulePOSTErrorEntry OBJECT-TYPE SYNTAX CienaCesModulePOSTErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable. " INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx, cienaCesModulePOSTErrorIndex } ::= { cienaCesModulePOSTErrorTable 1 } CienaCesModulePOSTErrorEntry ::= SEQUENCE { cienaCesModulePOSTErrorIndex INTEGER, cienaCesModulePOSTErrorDescription OCTET STRING, cienaCesModulePOSTErrorSeverity INTEGER, cienaCesModulePOSTErrorScope INTEGER, cienaCesModulePOSTScopeIndex INTEGER } cienaCesModulePOSTErrorIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the POST error for the module." ::= { cienaCesModulePOSTErrorEntry 1 } cienaCesModulePOSTErrorDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the module POST error." ::= { cienaCesModulePOSTErrorEntry 2 } cienaCesModulePOSTErrorSeverity OBJECT-TYPE SYNTAX INTEGER { unknown(0), fatal(1), severe(2), warning(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Severity of the POST error for the module." ::= { cienaCesModulePOSTErrorEntry 3 } cienaCesModulePOSTErrorScope OBJECT-TYPE SYNTAX INTEGER { unknown(0), chassis(1), blade(2), port(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Scope of the POST error for the module." ::= { cienaCesModulePOSTErrorEntry 4 } cienaCesModulePOSTScopeIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " When scope is a port this object identifies the port number." ::= { cienaCesModulePOSTErrorEntry 5 } -- -- Module Notification attributes -- cienaCesModuleSystemProtectionMode OBJECT-TYPE SYNTAX INTEGER { unprotected(1), cold(2), warm(3), hot(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the protection mode of the system." ::= { cienaCesModuleNotifAttrs 1} cienaCesModuleSwitchOverReason OBJECT-TYPE SYNTAX INTEGER { coldFailOver(1), coldSwitchOver(2), hotSwitchOver(3), hotFailOver(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the reason the SwitchOver happened. The following combinations determine the value of this object: CTM failure - Deprov mode - Cold FailOver User Initiated - Deprov Mode - Cold SwitchOver CTM failure - Audit mode - Hot FailOver User initiated - Audit mode - Hot SwitchOver. " ::= { cienaCesModuleNotifAttrs 2} cienaCesModuleNotifTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleNotifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table to define the notification variable bindings." ::= { cienaCesModuleNotifAttrs 3 } cienaCesModuleNotifEntry OBJECT-TYPE SYNTAX CienaCesModuleNotifEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the cienaCesModuleNotifEntryTable. " INDEX { cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx } ::= { cienaCesModuleNotifTable 1 } CienaCesModuleNotifEntry ::= SEQUENCE { cienaCesModuleHealthCategory TceHealthCategory, cienaCesModuleHealthSubCategory Unsigned32, cienaCesModuleHealthStatus TceHealthStatus, cienaCesModuleHealthStatusLast TceHealthStatus, cienaCesModuleHealthOriginType HealthOriginType, cienaCesModuleHealthOriginName DisplayString, cienaCesModuleHealthOriginUnitId Unsigned32 } cienaCesModuleHealthCategory OBJECT-TYPE SYNTAX TceHealthCategory MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the health category that the Health Manager monitors on the module." ::= { cienaCesModuleNotifEntry 1 } cienaCesModuleHealthSubCategory OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the health sub category that the Health Manager monitors on the module." ::= { cienaCesModuleNotifEntry 2 } cienaCesModuleHealthStatus OBJECT-TYPE SYNTAX TceHealthStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the current health status of health category and its sub category being monitored on the module." ::= { cienaCesModuleNotifEntry 3 } cienaCesModuleHealthStatusLast OBJECT-TYPE SYNTAX TceHealthStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the last known health status of health category and its sub category being monitored on the module." ::= { cienaCesModuleNotifEntry 4 } cienaCesModuleHealthOriginType OBJECT-TYPE SYNTAX HealthOriginType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the origin of the health status notification." ::= { cienaCesModuleNotifEntry 5 } cienaCesModuleHealthOriginName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..10)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the origin name of the health status notification." ::= { cienaCesModuleNotifEntry 6 } cienaCesModuleHealthOriginUnitId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the origin id of the health notification." ::= { cienaCesModuleNotifEntry 7 } -- -- CienaCesModuleResourceHealthEntry -- cienaCesModuleResourceHealthTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesModuleResourceHealthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table listing the health information of dataplane resources." ::= { cienaCesModule 6 } cienaCesModuleResourceHealthEntry OBJECT-TYPE SYNTAX CienaCesModuleResourceHealthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cienaCesModuleResourceHealthTable." INDEX { cienaCesModuleResourceHealthSubCategory, cienaCesModuleChassisIndx, cienaCesModuleShelfIndx, cienaCesModuleSlotIndx, cienaCesModuleResourceDeviceIndx } ::= { cienaCesModuleResourceHealthTable 1 } CienaCesModuleResourceHealthEntry ::= SEQUENCE { cienaCesModuleResourceHealthSubCategory INTEGER, cienaCesModuleResourceDeviceIndx Unsigned32, cienaCesModuleResourceHealthState TceHealthStatus, cienaCesModuleResourceHealthCurrMeasurement Unsigned32, cienaCesModuleResourceHealthMaxMeasurement Unsigned32, cienaCesModuleResourceHealthMaxThreshold Unsigned32 } cienaCesModuleResourceHealthSubCategory OBJECT-TYPE SYNTAX INTEGER { none(0), subPort(1), qosFlow(2), accessFlow(3), queueGroupInstance(4), schedulerInstance(5), pbtTransit(6), pltfmTokenBucket(7), pltfmEgressTunnel(8), pltfmVirtTcamEntries(9), pltfmAclTcamEntries(10), pltfmVOQ(11), pltfmCLScheduler(12), pltfmFQScheduler(13), pltfmEgressShapingCIR(14), pltfmBscp(15), pltfmHighRateTokenBucket(16), pltfmLowRateTokenBucket(17), pltfmParentMeter(18), pltfmChildMeter(19), pltfmL2UserTypes(20), logicalInterfaces(21), pltfmLmPowerBudget(22), pltfmPpIngressL2Xform(23), pltfmPpEgressL2Xform(24), pltfmPpInternalTcam(25), pltfmNpMaintPoint(26), pltfmNpMaintPointSession(27), pltfmNpFastTimer300Hz(28), pltfmNpFastTimer10msec(29), pltfmNpFastTimer100msec(30), pltfmNpFastTimer1sec(31), pltfmNpSlowTimer(32), pltfmNpWatchdogTimer(33), pltfmNpProtectionGroup(34) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sub-category of the dataplane resource being monitored. - 'none' is an enumeration placeholder." ::= { cienaCesModuleResourceHealthEntry 1} cienaCesModuleResourceDeviceIndx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the device being monitored." ::= { cienaCesModuleResourceHealthEntry 2} cienaCesModuleResourceHealthState OBJECT-TYPE SYNTAX TceHealthStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Health state of the dataplane resource being monitored." ::= { cienaCesModuleResourceHealthEntry 3} cienaCesModuleResourceHealthCurrMeasurement OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current value of the dataplane resource being monitored." ::= { cienaCesModuleResourceHealthEntry 4 } cienaCesModuleResourceHealthMaxMeasurement OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum recorded value of the dataplane resource being monitored." ::= { cienaCesModuleResourceHealthEntry 5 } cienaCesModuleResourceHealthMaxThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum possible value for the dataplane resource being monitored." ::= { cienaCesModuleResourceHealthEntry 6 } -- -- Notification -- cienaCesModuleStateChangeNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, cienaCesModuleOperState } STATUS current DESCRIPTION "A cienaCesModuleStateChange notification is sent when the operational state of the module is changed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState." ::= { cienaCesModuleMIBNotifications 1 } cienaCesModuleHealthStatusUnknownNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, cienaCesModuleHealthStatusLast } STATUS current DESCRIPTION "This notification is sent whenever the Health Manager detects a status change to unknown. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast." ::= { cienaCesModuleMIBNotifications 2 } cienaCesModuleHealthStatusWarningNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, cienaCesModuleHealthStatusLast } STATUS current DESCRIPTION "This notification is sent whenever the Health Manager detects a status change to warning. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast." ::= { cienaCesModuleMIBNotifications 3 } cienaCesModuleHealthStatusFaultedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, cienaCesModuleHealthStatusLast } STATUS current DESCRIPTION "This notification is sent whenever the Health Manager detects a status change to faulted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast." ::= { cienaCesModuleMIBNotifications 4 } cienaCesModuleHealthStatusDegradedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, cienaCesModuleHealthStatusLast } STATUS current DESCRIPTION "This notification is sent whenever the Health Manager detects a status change to degraded. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast." ::= { cienaCesModuleMIBNotifications 5 } cienaCesModuleHealthStatusGoodNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, cienaCesModuleHealthStatusLast } STATUS current DESCRIPTION "This notification is sent whenever the Health Manager detects a status change to normal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast." ::= { cienaCesModuleMIBNotifications 6 } cienaCesModuleSensorHighTempNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorHighTempThreshold } STATUS current DESCRIPTION "This notification is sent when the cienaCesModuleSensor temperature exceeds the high temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold." ::= { cienaCesModuleMIBNotifications 7 } cienaCesModuleSensorNormalTempNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, cienaCesModuleSensorHighTemp } STATUS current DESCRIPTION "This notification is sent if the cienaCesModule temperature changes from previously reported high or low temperature exceeding thresholds to normal temperature. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, and cienaCesModuleSensorHighTemp." ::= { cienaCesModuleMIBNotifications 9 } cienaCesModuleSensorLowTempNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTempThreshold } STATUS current DESCRIPTION "This notification is sent when the cienaCesModuleSensor falls below the low temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorLowTempThreshold." ::= { cienaCesModuleMIBNotifications 8 } cienaCesModuleHASwitchOverNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, cienaCesModuleOperState } STATUS current DESCRIPTION "This notification is sent for CTM switchover. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, and cienaCesModuleOperState." ::= { cienaCesModuleMIBNotifications 10 } cienaCesModuleProtectionModeColdNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleSystemProtectionMode } STATUS current DESCRIPTION "This notification is sent when the protection mode of the system changes to cold. A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode." ::= { cienaCesModuleMIBNotifications 11} cienaCesModuleProtectionModeWarmNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleSystemProtectionMode } STATUS current DESCRIPTION "This notification is sent when the protection mode of the system changes to warm. This state is not supported on the 5410 platform. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode." ::= { cienaCesModuleMIBNotifications 12 } cienaCesModuleProtectionModeUnprotectedNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleSystemProtectionMode } STATUS current DESCRIPTION "This notification is sent when the protection mode of the system changes to unprotected. A protection level of unprotected implies that there is no secondary CTM present in the system or that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure, the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode." ::= { cienaCesModuleMIBNotifications 13 } cienaCesModuleProtectionModeHotNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleSystemProtectionMode } STATUS current DESCRIPTION "This notification is sent when the protection mode of the system changes to hot. A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode." ::= { cienaCesModuleMIBNotifications 14 } cienaCesModulePostErrorNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModulePOSTErrorDescription } STATUS current DESCRIPTION "This notification is sent when a module POST error is detected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModulePOSTErrorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and cienaCesModulePOSTErrorDescription." ::= { cienaCesModuleMIBNotifications 15 } cienaCesModuleFastReloadUnsuccessfulNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, cienaCesModuleOperState } STATUS current DESCRIPTION "This notification is sent when the deprov (cold switchover or failover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState." ::= { cienaCesModuleMIBNotifications 16 } cienaCesModuleHitlessModeUnsuccessfulNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, cienaCesModuleOperState } STATUS current DESCRIPTION "This notification is sent when the audit (hot failover or switchover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState." ::= { cienaCesModuleMIBNotifications 17 } cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx } STATUS current DESCRIPTION "This notification is sent when the switch fabric detects a game-over failure and the system cannot automatically correct without resetting certain fabric subsystems. This kind of a disruption can cause a major service interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx." ::= { cienaCesModuleMIBNotifications 18 } cienaCesModuleSwitchFabricDisruptedRecoverableNotification NOTIFICATION-TYPE OBJECTS { cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx } STATUS current DESCRIPTION "This notification is sent when the switch fabric detects game-over failure and the system can automatically correct it. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx." ::= { cienaCesModuleMIBNotifications 19 } -- --Conformance statements -- moduleConfigGroup OBJECT-GROUP OBJECTS { cienaCesModuleModel, cienaCesModuleType, cienaCesModuleDescription, cienaCesModuleAdminState, cienaCesModuleOperState, cienaCesModuleProtectionRole, cienaCesModuleStandbyStatus, cienaCesModuleLastRebootReason, cienaCesModuleAdminPostState, cienaCesModuleOperPostState } STATUS current DESCRIPTION "A collection of objects providing information about configuration table." ::= { cienaCesModuleMIBGroups 1 } moduleDescriptionGroup OBJECT-GROUP OBJECTS { cienaCesModuleDescriptionBoardName, cienaCesModuleDescriptionBoardDesc, cienaCesModuleDescriptionTotalNumPorts, cienaCesModuleDescriptionHwVersion, cienaCesModuleDescriptionMfgDate, cienaCesModuleDescriptionBaseMac, cienaCesModuleDescriptionBoardSerialNum, cienaCesModuleDescriptionBoardPartNum, cienaCesModuleDescriptionUpTime} STATUS current DESCRIPTION "A collection of objects providing information about module capabilities." ::= { cienaCesModuleMIBGroups 2 } moduleSensorGroup OBJECT-GROUP OBJECTS { cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorHighTemp, cienaCesModuleSensorLowTemp, cienaCesModuleSensorHighTempThreshold, cienaCesModuleSensorLowTempThreshold} STATUS current DESCRIPTION "A collection of objects providing information of module temperature sensors." ::= { cienaCesModuleMIBGroups 3 } moduleNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cienaCesModuleStateChangeNotification, cienaCesModuleHealthStatusUnknownNotification, cienaCesModuleHealthStatusWarningNotification, cienaCesModuleHealthStatusFaultedNotification, cienaCesModuleHealthStatusDegradedNotification, cienaCesModuleHealthStatusGoodNotification, cienaCesModuleSensorHighTempNotification, cienaCesModuleSensorNormalTempNotification, cienaCesModuleSensorLowTempNotification, cienaCesModuleHASwitchOverNotification, cienaCesModuleProtectionModeColdNotification, cienaCesModuleProtectionModeWarmNotification, cienaCesModuleProtectionModeUnprotectedNotification, cienaCesModuleProtectionModeHotNotification, cienaCesModulePostErrorNotification, cienaCesModuleFastReloadUnsuccessfulNotification, cienaCesModuleHitlessModeUnsuccessfulNotification, cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification, cienaCesModuleSwitchFabricDisruptedRecoverableNotification } STATUS current DESCRIPTION "A collection of objects providing information about module notifications." ::= { cienaCesModuleMIBGroups 4 } modulePostErrorGroup OBJECT-GROUP OBJECTS { cienaCesModulePOSTErrorDescription, cienaCesModulePOSTErrorSeverity, cienaCesModulePOSTErrorScope, cienaCesModulePOSTScopeIndex } STATUS current DESCRIPTION "A collection of objects providing information of module POST errors." ::= { cienaCesModuleMIBGroups 5 } END