CAMBIUM-PTP800-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, IpAddress, Counter64, enterprises FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString FROM SNMPv2-TC; cambium MODULE-IDENTITY LAST-UPDATED "201204201226Z" ORGANIZATION "Cambium Networks Ltd." CONTACT-INFO "Post: Simon Whitaker Cambium Networks Ltd. Unit B2, Linhay Business Park, Eastern Road, Ashburton, Devon. TQ13 7UP United Kingdom Phone: +44 (0) 1364 655 500 Email: simon.whitaker@cambiumnetworks.com" DESCRIPTION "MIB for licenced microwave point to point wireless ethernet bridge." REVISION "201204201226Z" DESCRIPTION "PTP800-05-00: Added objects and traps to support IRFU, and 1+1 hot standby with receive diversity. Added queue mapping objects for L3 QOS. Added securityLevel to the licence group. Added syslogClientTrap. Updated objects and traps for multiple secure SNTP servers. Renamed 'oDU' objects to 'rFU'. Renamed antennaProtection to numberOfAntennas. Renamed 'vLANPriority' objects to 'ethernetPriority'. Renamed 'l2CPQueueMapping' objects to 'l2CPPriority'. Renamed 'fipsOperationalMode' objects to 'secureMode'. Renamed 'motorolaPTP' productVariant enumerations to 'pTP'. Renamed sNTPSynchronizationFailed bit to sNTPSync in enabledDiagnosticAlarms. Renamed activeElapsedTime to activeCounterMeasurementPeriod. Corrected spelling of 'advertisement' attributes." REVISION "201108191229Z" DESCRIPTION "PTP800-04-00: Renamed oDUIfSynthLockAlarm to oduCommonSynthLockAlarm. Increased range for radioLicenseRegion, radioLicenseBandwidth, transmitCapacityLimitDetail and rFUStatus. Added objects for http, https, and telnet. Added objects and traps for syslog. Replaced single instance of trap receiver with a table." REVISION "201103161723Z" DESCRIPTION "PTP800-03-00: Added objects and traps to support 1+1 Hot Standby. Updated range and description text for a number of objects. Made enableTransmission read-write. Added enableDiagnosticAlarms. Made byteErrorRatio and codeWordErrorRatio 64 bit counters." REVISION "201009301629Z" DESCRIPTION "PTP800-02-04: Updated & re-formatted description text. Corrected DisplayString sizes. Changed longitude and latitude types. Updated transmitCapacityLimit & dataPortCopperForcedConfiguration ranges." REVISION "201007301307Z" DESCRIPTION "PTP800-02-02: Added new phyStatusGroup objects. Updated oDUFreqSpacing & linkLoss ranges." REVISION "201005271952Z" DESCRIPTION "PTP800-02-01: data & management port status traps, writeable auto-negotiation." REVISION "201003311309Z" DESCRIPTION "PTP800-02-00: BIT STRING types now OCTET STRING. Added linkName, siteName, & support for l2CPQueueMapping & ACM ranges." REVISION "201001041833Z" DESCRIPTION "PTP800-01-01" REVISION "200910211426Z" DESCRIPTION "PTP800-01-00" ::= { enterprises 17713 } -- Groups in cambium ptp OBJECT IDENTIFIER ::= { cambium 1 } ptmp OBJECT IDENTIFIER ::= { cambium 2 } ptp800 OBJECT IDENTIFIER ::= { cambium 8 } -- Groups in ptp800 bridge OBJECT IDENTIFIER ::= { ptp800 4 } configuration OBJECT IDENTIFIER ::= { ptp800 5 } ethernet OBJECT IDENTIFIER ::= { ptp800 6 } licence OBJECT IDENTIFIER ::= { ptp800 8 } management OBJECT IDENTIFIER ::= { ptp800 9 } phyControl OBJECT IDENTIFIER ::= { ptp800 10 } phyStatus OBJECT IDENTIFIER ::= { ptp800 12 } alarms OBJECT IDENTIFIER ::= { ptp800 13 } smtp OBJECT IDENTIFIER ::= { ptp800 15 } snmpControl OBJECT IDENTIFIER ::= { ptp800 16 } sntp OBJECT IDENTIFIER ::= { ptp800 17 } reset OBJECT IDENTIFIER ::= { ptp800 18 } versions OBJECT IDENTIFIER ::= { ptp800 19 } pubStats OBJECT IDENTIFIER ::= { ptp800 20 } encryption OBJECT IDENTIFIER ::= { ptp800 22 } rfu OBJECT IDENTIFIER ::= { ptp800 23 } radioLicense OBJECT IDENTIFIER ::= { ptp800 24 } protectionConfig OBJECT IDENTIFIER ::= { ptp800 25 } protectionStatus OBJECT IDENTIFIER ::= { ptp800 26 } protectionStats OBJECT IDENTIFIER ::= { ptp800 27 } syslogControl OBJECT IDENTIFIER ::= { ptp800 28 } supplementary OBJECT IDENTIFIER ::= { ptp800 96 } ptpGroups OBJECT IDENTIFIER ::= { ptp800 98 } ptpTraps OBJECT IDENTIFIER ::= { ptp800 99 } ptpTrapPrefix OBJECT IDENTIFIER ::= { ptpTraps 0 } -- Compliance information -- ptpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the Cambium PTP MIB" MODULE -- this module MANDATORY-GROUPS { bridgeGroup , configurationGroup , ethernetGroup , licenceGroup , managementGroup , phyControlGroup , phyStatusGroup , alarmsGroup , smtpGroup , snmpControlGroup , sntpGroup , resetGroup , versionsGroup , pubStatsGroup , encryptionGroup , rfuGroup , radioLicenseGroup , protectionConfigGroup , protectionStatusGroup , protectionStatsGroup , syslogControlGroup , supplementaryGroup , notificationsGroup } ::= { ptp800 97 } bridgeGroup OBJECT-GROUP OBJECTS { localPacketFiltering } STATUS current DESCRIPTION "The bridge object group." ::= { ptpGroups 4 } configurationGroup OBJECT-GROUP OBJECTS { iPAddress , subnetMask , gatewayIPAddress , maximumTransmitPower , antennaGain , rFFeederLoss , remoteIPAddress , remoteMACAddress , enableTransmission , aTPCEnable , iFCableLength , linkName , siteName , diverseAntennaGain , diverseRfFeederLoss } STATUS current DESCRIPTION "The configuration object group." ::= { ptpGroups 5 } ethernetGroup OBJECT-GROUP OBJECTS { dataPortCopperAutoNegotiation , dataPortCopperAutoNegAdvertisement , dataPortStatus , dataPortSpeedAndDuplex , dataPortWirelessDownAlert , useVLANForManagementInterfaces , vLANManagementPriority , vLANManagementVIDValidation , vLANManagementVID , ethernetPriorityTableNumber , managementPortAutoNegotiation , managementPortAutoNegAdvertisement , managementPortStatus , managementPortSpeedAndDuplex , managementPortWirelessDownAlert , managementMode , managementCommittedInformationRate , dataPortPauseFrames , transmitCapacityLimit , transmitCapacityLimitDetail , dataPortEthernetMediaTypeToUse , dataPortCopperForcedConfiguration , managementPortForcedConfiguration , l2CPPriorityTableNumber , unknownNetworkPriorityQueueMapping , dSCPManagementPriority , qOSPriorityScheme , iPDSCPPriorityTableNumber , mPLSTCPriorityTableNumber , ethernetPriorityQueueMapping , l2CPPriorityQueueMapping , iPDSCPPriorityQueueMapping , mPLSTCPriorityQueueMapping } STATUS current DESCRIPTION "The ethernet object group." ::= { ptpGroups 6 } licenceGroup OBJECT-GROUP OBJECTS { productVariant , productName , ethernetFiberSupport , transmitCapacity , encryptionAlgorithmsAvail , securityLevel } STATUS current DESCRIPTION "The licence object group." ::= { ptpGroups 8 } managementGroup OBJECT-GROUP OBJECTS { linkNameMismatch , alignmentMode , tFTPServerIPAddress , tFTPServerPortNumber , tFTPSoftwareUpgradeFileName , tFTPStartSoftwareUpgrade , tFTPSoftwareUpgradeStatus , tFTPSoftwareUpgradeStatusText , tFTPSoftwareUpgradeStatusAdditionalText , hTTPAccessEnabled , telnetAccessEnabled , hTTPPortNumber , hTTPSPortNumber , telnetPortNumber , hTTPSAccessEnabled } STATUS current DESCRIPTION "The management object group." ::= { ptpGroups 9 } phyControlGroup OBJECT-GROUP OBJECTS { remoteMaximumTransmitPower , minModulation , minCodeRate , maxModulation , maxCodeRate } STATUS current DESCRIPTION "The phyControl object group." ::= { ptpGroups 10 } phyStatusGroup OBJECT-GROUP OBJECTS { receivePower , vectorError , transmitPower , linkLoss , receiveModulation , transmitModulation , receiveCodeRate , transmitCodeRate } STATUS current DESCRIPTION "The phyStatus object group." ::= { ptpGroups 12 } alarmsGroup OBJECT-GROUP OBJECTS { unitOutOfCalibration , encryptionEnabledMismatch , wirelessLinkDisabledWarning , dataPortDisabledWarning , dataPortFiberStatus , dataPortConfigurationMismatch , managementPortDisabledWarning , rFUStatus , managementPortConfigurationMismatch , secureModeAlarm , rFUPlatformCompatibility , rFUProtectionCompatibility } STATUS current DESCRIPTION "The alarms object group." ::= { ptpGroups 13 } smtpGroup OBJECT-GROUP OBJECTS { sMTPEmailAlert , sMTPServerIPAddress , sMTPServerPortNumber , sMTPSourceEmailAddress , sMTPDestinationEmailAddress , sMTPEnabledMessages } STATUS current DESCRIPTION "The smtp object group." ::= { ptpGroups 15 } snmpControlGroup OBJECT-GROUP OBJECTS { sNMPPortNumber , sNMPCommunityString , sNMPTrapVersion , sNMPEnabledTraps , enabledDiagnosticAlarms , enabledDiagnosticProtectionAlarms , sNMPTrapTableNumber , sNMPTrapIPAddress , sNMPTrapPortNumber } STATUS current DESCRIPTION "The snmpControl object group." ::= { ptpGroups 16 } sntpGroup OBJECT-GROUP OBJECTS { sNTPState , sNTPPollInterval , sNTPSync , sNTPLastSync , systemClock , timeZone , daylightSaving , sNTPPrimaryServer , sNTPPrimaryServerDeadTime , sNTPServerRetries , sNTPServerTimeout , sNTPServerTableNumber , sNTPServerIPAddress , sNTPServerPortNumber , sNTPServerResponse } STATUS current DESCRIPTION "The sntp object group." ::= { ptpGroups 17 } resetGroup OBJECT-GROUP OBJECTS { systemReset } STATUS current DESCRIPTION "The reset object group." ::= { ptpGroups 18 } versionsGroup OBJECT-GROUP OBJECTS { softwareVersion , hardwareVersion , secondarySoftwareVersion , bootVersion } STATUS current DESCRIPTION "The versions object group." ::= { ptpGroups 19 } pubStatsGroup OBJECT-GROUP OBJECTS { receiveDataRate , transmitDataRate , aggregateDataRate , wirelessLinkAvailability , wirelessLinkStatus , byteErrorRatio , codeWordErrorRatio } STATUS current DESCRIPTION "The pubStats object group." ::= { ptpGroups 20 } encryptionGroup OBJECT-GROUP OBJECTS { encryptionAlgorithm } STATUS current DESCRIPTION "The encryption object group." ::= { ptpGroups 22 } rfuGroup OBJECT-GROUP OBJECTS { rFURfBand , rFUTxBandAboveRx , rFUFreqSpacing , rFUTxPowerMin , rFUTxPowerMax , rFURxFreqMin , rFURxFreqMax , rFUTxFreqMin , rFUTxFreqMax , rFUSerial , rFUActiveFirmwareBank , rFUVersionBank1 , rFUVersionBank2 , rFUType , rFURxRFSynthLockAlarm , rFUTxRFSynthLockAlarm , rFUTxPowerAlarm , rFUCommonIFSynthLockAlarm , rFUPowerAlarm , rFULockoutAlarm , rFUCableAlarm , rFUCableAttenuationAdjustAlarm , rFUTxPowerDegradedAlarm , rFURpsAlarm , rFUTxMuteStatus , rFUFanAssemblyAlarm , rFUHighTemperatureAlarm , rFURFSwitchAlarm , rFURxIFSynthLockAlarm , rFUTxIFSynthLockAlarm , rFUPowerButtonPressed , rFUConnectedPlatform , rFUCommonRFSynthLockAlarm , rFUBranchingConfiguration , rFUTransceiverLocation , rFURfSwitchCableAlarm , rFUReceiveBranchingUnitLoss , rFUTransmitBranchingUnitLoss } STATUS current DESCRIPTION "The rfu object group." ::= { ptpGroups 23 } radioLicenseGroup OBJECT-GROUP OBJECTS { radioLicenseIdentifier , radioLicenseBand , radioLicenseRegion , radioLicenseTxFreq , radioLicenseRxFreq , radioLicenseBandwidth , radioLicenseMaxEIRP , radioLicenseModulation , radioLicenseCodeRate , radioLicenseIncompatibleAlarm , radioLicenseMinModulation , radioLicenseMinCodeRate , radioLicenseMaxModulation , radioLicenseMaxCodeRate } STATUS current DESCRIPTION "The radioLicense object group." ::= { ptpGroups 24 } protectionConfigGroup OBJECT-GROUP OBJECTS { protection , faultProtectionSwitching , primarySecondaryMode , numberOfAntennas , primaryRecovery , primaryRecoveryPeriod , requestedProtectionState , antennaReceiveLevelDeltaThreshold , antennaReceiveLevelMeasurementWindow , fiberY , rxDiversityVlanTpid , rxDiversityVid } STATUS current DESCRIPTION "The protectionConfig object group." ::= { ptpGroups 25 } protectionStatusGroup OBJECT-GROUP OBJECTS { protectionAvailabilityStatus , protectionConfigurationStatus , protectionState , activeUnit , protectionSwitchCause , endId , neighborIPAddress , neighborMACAddress , wirelessReceiveSignalStatus , licensedTransmitCapacityStatus , dataPortEthernetSpeedStatus , managementPortEthernetSpeedStatus , protectionInterfaceStatus , remotePrimaryIPAddress , remoteSecondaryIPAddress , remotePrimaryMACAddress , remoteSecondaryMACAddress , remotePrimarySecondaryMode , transmitterStatus , endWirelessReceiveSignalStatus , rxDiversityDataPortStatus , rxDiversityAvailabilityStatus , rxDiversityConfigurationStatus , rxDiversityNeighborCompatibility , rxDiversityVlanTpidNeighborCompatibility , rxDiversityVidNeighborCompatibility } STATUS current DESCRIPTION "The protectionStatus object group." ::= { ptpGroups 26 } protectionStatsGroup OBJECT-GROUP OBJECTS { activeCodeWordCount , activeCodeWordErrorCount , activeByteCount , activeByteErrorCount , activeAvailableTime , activeCounterMeasurementPeriod , activeWirelessLinkAvailability , activeCodeWordErrorRatio , activeByteErrorRatio } STATUS current DESCRIPTION "The protectionStats object group." ::= { ptpGroups 27 } syslogControlGroup OBJECT-GROUP OBJECTS { syslogClient , syslogState } STATUS current DESCRIPTION "The syslogControl object group." ::= { ptpGroups 28 } supplementaryGroup OBJECT-GROUP OBJECTS { longitude , latitude , altitude } STATUS current DESCRIPTION "The supplementary object group." ::= { ptpGroups 96 } notificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { dataPortStatusTrap , linkNameMismatchTrap , alignmentModeTrap , unitOutOfCalibrationTrap , encryptionEnabledMismatchTrap , wirelessLinkDisabledWarningTrap , dataPortDisabledWarningTrap , dataPortFiberStatusTrap , dataPortConfigurationMismatchTrap , sNTPSyncTrap , managementPortStatusTrap , managementPortDisabledWarningTrap , rFUStatusTrap , managementPortConfigurationMismatchTrap , wirelessLinkStatusTrap , protectionAvailabilityStatusTrap , protectionConfigurationStatusTrap , protectionStateTrap , wirelessReceiveSignalStatusTrap , licensedTransmitCapacityStatusTrap , dataPortEthernetSpeedStatusTrap , managementPortEthernetSpeedStatusTrap , protectionInterfaceStatusTrap , syslogStateTrap , syslogLocalNearlyFullTrap , syslogLocalWrappedTrap , secureModeAlarmTrap , endWirelessReceiveSignalStatusTrap , rxDiversityDataPortStatusTrap , rxDiversityAvailabilityStatusTrap , rxDiversityConfigurationStatusTrap , rFUPowerButtonPressedTrap , syslogClientTrap } STATUS current DESCRIPTION "The notifications group." ::= { ptpGroups 99 } EthernetPriorityTableEntry ::= SEQUENCE { ethernetPriorityQueueMapping INTEGER , ethernetPriorityTableIndex INTEGER } ethernetPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF EthernetPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority." ::= { ethernet 15 } ethernetPriorityTableEntry OBJECT-TYPE SYNTAX EthernetPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table EthernetPriorityTable" INDEX { ethernetPriorityTableIndex } ::= { ethernetPriorityTable 1 } L2CPPriorityTableEntry ::= SEQUENCE { l2CPPriorityQueueMapping INTEGER , l2CPPriorityTableIndex INTEGER } l2CPPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF L2CPPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A priority queue mapping table. This is a list of packet queues associated with the different layer 2 control protocol frameworks." ::= { ethernet 32 } l2CPPriorityTableEntry OBJECT-TYPE SYNTAX L2CPPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table L2CPPriorityTable" INDEX { l2CPPriorityTableIndex } ::= { l2CPPriorityTable 1 } IPDSCPPriorityTableEntry ::= SEQUENCE { iPDSCPPriorityQueueMapping INTEGER , iPDSCPPriorityTableIndex INTEGER } iPDSCPPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF IPDSCPPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority." ::= { ethernet 38 } iPDSCPPriorityTableEntry OBJECT-TYPE SYNTAX IPDSCPPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table IPDSCPPriorityTable" INDEX { iPDSCPPriorityTableIndex } ::= { iPDSCPPriorityTable 1 } MPLSTCPriorityTableEntry ::= SEQUENCE { mPLSTCPriorityQueueMapping INTEGER , mPLSTCPriorityTableIndex INTEGER } mPLSTCPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF MPLSTCPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority." ::= { ethernet 40 } mPLSTCPriorityTableEntry OBJECT-TYPE SYNTAX MPLSTCPriorityTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table MPLSTCPriorityTable" INDEX { mPLSTCPriorityTableIndex } ::= { mPLSTCPriorityTable 1 } SNMPTrapTableEntry ::= SEQUENCE { sNMPTrapTableIndex INTEGER , sNMPTrapIPAddress IpAddress , sNMPTrapPortNumber INTEGER } sNMPTrapTable OBJECT-TYPE SYNTAX SEQUENCE OF SNMPTrapTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " SNMP trap configuration table." ::= { snmpControl 10 } sNMPTrapTableEntry OBJECT-TYPE SYNTAX SNMPTrapTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table SNMPTrapTable" INDEX { sNMPTrapTableIndex } ::= { sNMPTrapTable 1 } SNTPServerTableEntry ::= SEQUENCE { sNTPServerTableIndex INTEGER , sNTPServerIPAddress IpAddress , sNTPServerPortNumber INTEGER , sNTPServerResponse DisplayString } sNTPServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SNTPServerTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { sntp 15 } sNTPServerTableEntry OBJECT-TYPE SYNTAX SNTPServerTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table SNTPServerTable" INDEX { sNTPServerTableIndex } ::= { sNTPServerTable 1 } -- Bridge group attribute definitions -- localPacketFiltering OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls filtering for Ethernet frames that have source or destination address equal to the MAC address of the CMU. When Local Packet Filtering is disabled, frames generated within the management agent are sent to both Ethernet and wireless interfaces. When Local Packet Filtering is enabled, frames generated within the management agent are transmitted at the port learned for the destination address, and frames addressed to the management agent are not bridged" ::= { bridge 1 } -- Configuration group attribute definitions -- iPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network." ::= { configuration 1 } subnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance" ::= { configuration 2 } gatewayIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks." ::= { configuration 3 } maximumTransmitPower OBJECT-TYPE SYNTAX INTEGER (-1000..370) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link, expressed in tenths of a dBm. Note that when an IRFU is connected rather than an ODU, the transmit power refers to the power at the transceiver output and not the IRFU antenna port. See the User Guide for more details" ::= { configuration 6 } antennaGain OBJECT-TYPE SYNTAX INTEGER (0..610) MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna Gain. Expressed in 10ths of dBi." ::= { configuration 7 } rFFeederLoss OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Insertion loss of the microwave connection between the RFU and the antenna. The feeder loss should be 0 dB for the standard 1 + 0 direct mount configuration. Expressed in 10ths of dB." ::= { configuration 8 } remoteIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the peer wireless unit" ::= { configuration 12 } remoteMACAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the peer wireless unit" ::= { configuration 13 } enableTransmission OBJECT-TYPE SYNTAX INTEGER { enabled(0), muted(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Permits the transmitter to radiate. Once the unit is installed and configured, use this to enable the transmitter" ::= { configuration 14 } aTPCEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enables Automatic Transmitter Power Control (ATPC). NOTE: Use of ATPC is mandatory in some regions. When ATPC is enabled, the transmit power is dynamically adjusted to optimize link performance. The transmit power will always be adjusted within the constraints set by Maximum Transmit Power. When ATPC is disabled, the transmit power will be fixed at the level set by Maximum Transmit Power. When adaptive modulation is enabled, this setting can limit the capacity of the system by capping the modulation to a mode which is consistent with the configured Maximum Transmit Power." ::= { configuration 15 } iFCableLength OBJECT-TYPE SYNTAX INTEGER (0..19000) MAX-ACCESS read-only STATUS current DESCRIPTION "IF Cable Length in cm - please refer to the user manual for more information on the recommended cable type." ::= { configuration 16 } linkName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the PTP link." ::= { configuration 17 } siteName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field is allocated by the system administrator and contains a description of the site name together with any additional notes" ::= { configuration 18 } diverseAntennaGain OBJECT-TYPE SYNTAX INTEGER (0..610) MAX-ACCESS read-write STATUS current DESCRIPTION "Diverse Antenna Receive Gain. Expressed in 10ths of dBi." ::= { configuration 19 } diverseRfFeederLoss OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Insertion loss of the microwave connection between the RFU and the diverse antenna. Expressed in 10ths of dB." ::= { configuration 20 } -- Ethernet group attribute definitions -- dataPortCopperAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls whether the configuration of the copper data Ethernet interface is automatically negotiated or forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To operate an Ethernet link at a fixed speed, leave auto negotiation enabled and limit the Auto Neg Advertisement to the desired speed. Only force Ethernet configuration as a last resort if constrained auto negotiation fails. NB: Auto-MDI/MDIX is disabled when Forced is set, and the unit defaults to MDIX, so the correct straight through or crossover cable will be required to establish a connection. NB: both ends of an Ethernet link must be configured identically, as Forced and auto negotiation are NOT compatible. A mixed configuration will cause a duplex mismatch" ::= { ethernet 1 } dataPortCopperAutoNegAdvertisement OBJECT-TYPE SYNTAX BITS { neg100MbpsFullDuplex(6), neg1000MbpsFullDuplex(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the different configurations of the copper data Ethernet interface that will be advertised during auto negotiation. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link). WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!" ::= { ethernet 2 } dataPortStatus OBJECT-TYPE SYNTAX INTEGER { down(0), copperLinkUp(1), fiberLinkUp(2), fiberYInactive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the data Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert" ::= { ethernet 4 } dataPortSpeedAndDuplex OBJECT-TYPE SYNTAX INTEGER { speed1000MbpsFullDuplex(0), speed100MbpsFullDuplex(1), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current speed and duplex of the data Ethernet link" ::= { ethernet 5 } dataPortWirelessDownAlert OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, this causes the data Ethernet link to be dropped briefly when the wireless link drops. This is so that spanning tree algorithms can quickly detect that there is a problem" ::= { ethernet 6 } useVLANForManagementInterfaces OBJECT-TYPE SYNTAX INTEGER { noVLANTagging(0), iEEE8021QTaggedCTagType8100(1), iEEE8021adTaggedSTagorBTagType88a8(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls whether the management interfaces (WWW/SNMP/SMTP/SNTP) use VLAN tags or not" ::= { ethernet 7 } vLANManagementPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This VLAN Priority (0-7) will be included in packets generated by the management interfaces" ::= { ethernet 8 } vLANManagementVIDValidation OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, the management interfaces will only respond to Ethernet packets tagged with the configured VLAN Management VID, otherwise packets with any VID will be accepted" ::= { ethernet 9 } vLANManagementVID OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This VLAN VID (0-4094) will be included in packets generated by the management interfaces" ::= { ethernet 11 } ethernetPriorityTableNumber OBJECT-TYPE SYNTAX INTEGER (9) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the ethernetPriorityTable." ::= { ethernet 14 } managementPortAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls whether the configuration of the out-of-band management Ethernet interface is automatically negotiated or forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To operate an Ethernet link at a fixed speed, leave auto negotiation enabled and limit the Auto Neg Advertisement to the desired speed. Only force Ethernet configuration as a last resort if constrained auto negotiation fails. NB: Auto-MDI/MDIX is disabled when Forced is set, and the unit defaults to MDIX, so the correct straight through or crossover cable will be required to establish a connection. NB: both ends of an Ethernet link must be configured identically, as Forced and auto negotiation are NOT compatible. A mixed configuration will cause a duplex mismatch" ::= { ethernet 16 } managementPortAutoNegAdvertisement OBJECT-TYPE SYNTAX BITS { neg10MbpsFullDuplex(6), neg100MbpsFullDuplex(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the different configurations of the out-of-band management Ethernet interface that will be advertised during auto negotiation. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link). WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!" ::= { ethernet 17 } managementPortStatus OBJECT-TYPE SYNTAX INTEGER { down(0), copperLinkUp(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the out-of-band management Ethernet link" ::= { ethernet 18 } managementPortSpeedAndDuplex OBJECT-TYPE SYNTAX INTEGER { speed100MbpsFullDuplex(1), speed10MbpsFullDuplex(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current speed and duplex of the out-of-band management Ethernet link" ::= { ethernet 19 } managementPortWirelessDownAlert OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, this causes the out-of-band management Ethernet link to be dropped briefly when the wireless link drops. This is so that spanning tree algorithms can quickly detect that there is a problem" ::= { ethernet 20 } managementMode OBJECT-TYPE SYNTAX INTEGER { outofBandLocal(0), outofBand(1), inBand(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Management mode: Out-of-band management. End-to-end out-of-band mode in which the management agent can be reached from the management port at the local CMU, and (assuming that the wireless link is established) the management port at the remote CMU. Out-of-band local management. (default) Similar to the standard out-of-band mode, except that management frames are not forwarded over the wireless link. In-band management. The management agent can be reached from the data port at the local CMU, and (assuming that the wireless link is established) the data port at the remote CMU. In this mode, the management port is disabled." ::= { ethernet 22 } managementCommittedInformationRate OBJECT-TYPE SYNTAX INTEGER { kbps200(0), kbps300(1), kbps400(2), kbps500(3), kbps600(4), kbps700(5), kbps800(6), kbps900(7), kbps1000(8), kbps1100(9), kbps1200(10), kbps1300(11), kbps1400(12), kbps1500(13), kbps1600(14), kbps1700(15), kbps1800(16), kbps1900(17), kbps2000(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Committed Information Rate (CIR). The Management Network guarantees this capacity will be available for management traffic" ::= { ethernet 23 } dataPortPauseFrames OBJECT-TYPE SYNTAX INTEGER { tunnel(0), discard(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Controls whether the bridge tunnels or discards Layer 2 PAUSE frames arriving at the data Ethernet port. Such frames are identified by the destination MAC Address being equal to 01-80-C2-00-00-01" ::= { ethernet 24 } transmitCapacityLimit OBJECT-TYPE SYNTAX INTEGER (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit capacity is limited by the lower of: 1) the capacity limit specified by the installed License Key. 2) the Ethernet speed negotiated at the other end of the wireless link. Value expressed in 10ths of Mbps. 0 indicates unlimited" ::= { ethernet 26 } transmitCapacityLimitDetail OBJECT-TYPE SYNTAX INTEGER { limitedDueToAbsenceOfLicenseKey(0), runningAtTheCapacityLimit(1), runningAtUnlimitedCapacity(2), restrictedDueToRemoteEthernetSpeed(3), limitedDueToDevelopmentOverride(4), unlimitedDueToDevelopmentOverride(5), unlimitedCapacityTrialPeriod(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "A brief description of the reason (if any) for the limit being applied to the transmit capacity" ::= { ethernet 27 } dataPortEthernetMediaTypeToUse OBJECT-TYPE SYNTAX INTEGER { autowithFiberPreference(0), forceCopper(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical media type to use on the data Ethernet port " ::= { ethernet 28 } dataPortCopperForcedConfiguration OBJECT-TYPE SYNTAX INTEGER { force100MbpsFullDuplex(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This forces the configuration of the copper data Ethernet interface rather than using auto negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE Ethernet PORT TO WHICH IT IS CONNECTED IDENTICALLY! WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link)" ::= { ethernet 29 } managementPortForcedConfiguration OBJECT-TYPE SYNTAX INTEGER { force100MbpsFullDuplex(0), force10MbpsFullDuplex(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This forces the configuration of the out-of-band management Ethernet interface rather than using auto negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE Ethernet PORT TO WHICH IT IS CONNECTED IDENTICALLY! WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link)" ::= { ethernet 30 } l2CPPriorityTableNumber OBJECT-TYPE SYNTAX INTEGER (5) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the l2CPPriorityTable." ::= { ethernet 31 } unknownNetworkPriorityQueueMapping OBJECT-TYPE SYNTAX INTEGER { q0(0), q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the classification of unknown network protocols to an egress queue at the wireless port. Unknown means something other than IP and MPLS" ::= { ethernet 33 } dSCPManagementPriority OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This Differentiated Services Code Point value will be inserted in the IP Header of all IP Datagrams transmitted by the management interfaces" ::= { ethernet 34 } qOSPriorityScheme OBJECT-TYPE SYNTAX INTEGER { ethernet(0), iPMPLS(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects classification based on fields in the Ethernet header (Layer 2) or in the Network header (Layer 3). The unit recognises two network layer protocols: IP and MPLS" ::= { ethernet 35 } iPDSCPPriorityTableNumber OBJECT-TYPE SYNTAX INTEGER (64) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the iPDSCPPriorityTable." ::= { ethernet 37 } mPLSTCPriorityTableNumber OBJECT-TYPE SYNTAX INTEGER (8) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the mPLSTCPriorityTable." ::= { ethernet 39 } -- EthernetPriorityTable group attribute definitions -- ethernetPriorityQueueMapping OBJECT-TYPE SYNTAX INTEGER { q0(0), q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the classification of this Ethernet priority (also known as IEEE 802.1p value) to an egress queue at the wireless port." ::= { ethernetPriorityTableEntry 1 } ethernetPriorityTableIndex OBJECT-TYPE SYNTAX INTEGER { p0(1), p1(2), p2(3), p3(4), p4(5), p5(6), p6(7), p7(8), untagged(9) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet priority flag, used to index values in the ethernetPriorityTable." ::= { ethernetPriorityTableEntry 2 } -- L2CPPriorityTable group attribute definitions -- l2CPPriorityQueueMapping OBJECT-TYPE SYNTAX INTEGER { q0(0), q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the classification of this layer two control protocol (L2CP) to an egress queue at the wireless port" ::= { l2CPPriorityTableEntry 1 } l2CPPriorityTableIndex OBJECT-TYPE SYNTAX INTEGER { bridge(1), gARPMRP(2), cFM(3), rAPS(4), eAPS(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "layer 2 control protocol, used to index values in the l2CPPriorityTable." ::= { l2CPPriorityTableEntry 2 } -- IPDSCPPriorityTable group attribute definitions -- iPDSCPPriorityQueueMapping OBJECT-TYPE SYNTAX INTEGER { q0(0), q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the classification of this IP differentiated services code point (DSCP) value to an egress queue at the wireless port" ::= { iPDSCPPriorityTableEntry 1 } iPDSCPPriorityTableIndex OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP DSCP priority flag, used to index values in the iPDSCPPriorityTable" ::= { iPDSCPPriorityTableEntry 2 } -- MPLSTCPriorityTable group attribute definitions -- mPLSTCPriorityQueueMapping OBJECT-TYPE SYNTAX INTEGER { q0(0), q1(1), q2(2), q3(3), q4(4), q5(5), q6(6), q7(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the classification of this MPLS traffic class (the field formerly known as EXP) to an egress queue at the wireless port" ::= { mPLSTCPriorityTableEntry 1 } mPLSTCPriorityTableIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPLS TC priority flag, used to index values in the mPLSTCPriorityTable" ::= { mPLSTCPriorityTableEntry 2 } -- Licence group attribute definitions -- productVariant OBJECT-TYPE SYNTAX INTEGER { pTPxx400Full(0), pTPxx400Deprecated1(1), pTPxx400Deprecated2(2), pTPxx400Lite(3), spare1(4), pTPxx300(5), spare2(6), spare3(7), pTPxx500FullDeprecated(8), pTPxx500LiteDeprecated(9), pTPxx500(10), pTPxx600Lite(11), pTPxx600Full(12), spare5(13), spare6(14), pTP800(15) } MAX-ACCESS read-only STATUS current DESCRIPTION "The product variant" ::= { licence 2 } productName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the product variant" ::= { licence 3 } ethernetFiberSupport OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet fiber support availability on this wireless unit" ::= { licence 4 } transmitCapacity OBJECT-TYPE SYNTAX INTEGER { rate10Mbps(0), rate20Mbps(1), rate30Mbps(2), rate40Mbps(3), rate50Mbps(4), rate100Mbps(5), rate150Mbps(6), rate200Mbps(7), rate300Mbps(8), rateUnlimited(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum capacity the wireless link may provide in the transmit direction. This is restricted by the License Key." ::= { licence 10 } encryptionAlgorithmsAvail OBJECT-TYPE SYNTAX INTEGER { none(0), aESRijndael(1), aES256bitRijndael(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Encryption Algorithm(s) available to the wireless link. N.B. The same Encryption Algorithm must be configured at BOTH ends of the link for it to function correctly" ::= { licence 11 } securityLevel OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum configurable security level" ::= { licence 12 } -- Management group attribute definitions -- linkNameMismatch OBJECT-TYPE SYNTAX INTEGER { ok(0), linkNameMismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Signaling was received with the wrong Link Name. Either the Link Name is configured differently at each end of the wireless link, or this unit is aligned to the wrong link partner. NB: A change of value during operation may generate an SNMP trap and/or SMTP email alert" ::= { management 3 } alignmentMode OBJECT-TYPE SYNTAX INTEGER { normal(0), aligning(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the unit is undergoing alignment. NB: a change of state during operation may generate an SNMP trap and/or SMTP email alert" ::= { management 4 } tFTPServerIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved" ::= { management 5 } tFTPServerPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The port number of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved" ::= { management 6 } tFTPSoftwareUpgradeFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Filename of the Software Upgrade to be loaded from the TFTP Server" ::= { management 7 } tFTPStartSoftwareUpgrade OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Write '1' to this attribute to start the TFTP software upgrade process. The attribute will be reset to 0 when the upgrade process has finished" ::= { management 8 } tFTPSoftwareUpgradeStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), uploadinprogress(1), uploadsuccessfulprogrammingFLASH(2), upgradesuccessfulreboottorunthenewsoftwareimage(3), upgradefailed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the TFTP Software upgrade process" ::= { management 9 } tFTPSoftwareUpgradeStatusText OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Descriptive text describing the status of the TFTP Software upgrade process, including any error details" ::= { management 10 } tFTPSoftwareUpgradeStatusAdditionalText OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Any additional text describing the status of the TFTP Software upgrade process, including any error details" ::= { management 11 } hTTPAccessEnabled OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls whether or not HTTP access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the HTTP port. Remote management via HTTPS is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Enabled)" ::= { management 12 } telnetAccessEnabled OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls whether or not Telnet access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the TELNET port. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Disabled)" ::= { management 13 } hTTPPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This controls the port number for HTTP access. A value of zero will use the default port number. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 80)" ::= { management 14 } hTTPSPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This controls the port number for HTTPS access. A value of zero will use the default port number. Availability of HTTPS is controlled via the Licence Key. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 443)" ::= { management 15 } telnetPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This controls the port number for TELNET access. A value of zero will use the default port number. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = 23)" ::= { management 16 } hTTPSAccessEnabled OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This controls whether or not HTTPS access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the configured HTTPS Port Number. Remote management via HTTP is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Enabled)" ::= { management 17 } -- PhyControl group attribute definitions -- remoteMaximumTransmitPower OBJECT-TYPE SYNTAX INTEGER (-1000..370) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transmit power the remote wireless unit is permitted to use when establishing and maintaining the wireless link, expressed in tenths of a dBm. Note that when an IRFU is connected rather than an ODU, the transmit power refers to the power at the transceiver output and not the IRFU antenna port. See the User Guide for more details" ::= { phyControl 4 } minModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "When adaptive modulation is enabled, PTP 800 will adapt the modulation mode between a minimum and maximum modulation mode. Depending on the region, minimum and maximum modulation modes will be either derived from the radio license, e.g. FCC and Industry Canada, or will be user adjustable, e.g. ETSI.In general, a modulation mode is defined by two aspects, a modulation and a code rate. This integer attribute identifies the modulation aspect of the minimum modulation mode. For example, if the minimum modulation mode is 16QAM 0.91, this attribute will be set to a value of 2 which identifies a modulation of 16QAM." ::= { phyControl 6 } minCodeRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "When adaptive modulation is enabled, PTP 800 will adapt the modulation mode between a minimum and maximum modulation mode. Depending on the region, minimum and maximum modulation modes will be either derived from the radio license, e.g. FCC and Industry Canada, or will be user adjustable, e.g. ETSI. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This attribute is equal to 100 times the code rate aspect of the minimum modulation mode. For example, if the minimum modulation mode is 16QAM 0.91, this attribute will be set to a value of 91." ::= { phyControl 7 } maxModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "When adaptive modulation is enabled, PTP 800 will adapt the modulation mode between a minimum and maximum modulation mode. Depending on the region, minimum and maximum modulation modes will be either derived from the radio license, e.g. FCC and Industry Canada, or will be user adjustable, e.g. ETSI. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This integer attribute identifies the modulation aspect of the maximum modulation mode. For example, if the maximum modulation mode is 256QAM 0.91, this attribute will be set to a value of 6 which identifies a modulation of 256QAM." ::= { phyControl 8 } maxCodeRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "When adaptive modulation is enabled, PTP 800 will adapt the modulation mode between a minimum and maximum modulation mode. Depending on the region, minimum and maximum modulation modes will be either derived from the radio license, e.g. FCC and Industry Canada, or will be user adjustable, e.g. ETSI. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This attribute is equal to 100 times the code rate aspect of the maximum modulation mode. For example, if the maximum modulation mode is 256QAM 0.91, this attribute will be set to a value of 91." ::= { phyControl 9 } -- PhyStatus group attribute definitions -- receivePower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the receive power measured by the RFU. When an IRFU transceiver is connected rather than an ODU, the Receive Power refers to the power at the input to the transceiver and not the IRFU antenna port. Expressed in tenths of a dBm." ::= { phyStatus 1 } vectorError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Vector Error is a measure of received signal quality. The value is generally in the range from -6 dB to -38 dB, a more negative number indicating a higher quality signal. Expressed in tenths of a dB." ::= { phyStatus 2 } transmitPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the transmit power of the RFU. When an IRFU transceiver is connected rather than an ODU, the Transmit Power refers to the power at the transceiver output and not the IRFU antenna port. Expressed in tenths of a dBm." ::= { phyStatus 3 } linkLoss OBJECT-TYPE SYNTAX INTEGER (-500..1800) MAX-ACCESS read-only STATUS current DESCRIPTION "Link Loss is a measurement of the loss in signal level as the radio wave propagates between the antennas installed at each end of the link. The Link Loss is only accurate if the Antenna Gain and RF Feeder Loss have been configured correctly at both ends of the link. Expressed in tenths of a dB." ::= { phyStatus 5 } receiveModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active receive modulation" ::= { phyStatus 8 } transmitModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current active transmit modulation" ::= { phyStatus 9 } receiveCodeRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the code rate applied to the signal being received at the wireless interface. The reported value is the code rate multiplied by 100." ::= { phyStatus 16 } transmitCodeRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the code rate applied to the signal transmitted at the wireless interface. The reported value is the code rate multiplied by 100." ::= { phyStatus 17 } -- Alarms group attribute definitions -- unitOutOfCalibration OBJECT-TYPE SYNTAX INTEGER { calibrated(0), partialCalibration(1), invalidCalibration(2), bandwidthvariantunsupportedPAsShutdown(3), outOfCalibrationPAsShutdown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The unit is out of calibration" ::= { alarms 1 } encryptionEnabledMismatch OBJECT-TYPE SYNTAX INTEGER { ok(0), encryptionEnabledMismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption has been enabled on one end of the wireless link but not the other" ::= { alarms 3 } wirelessLinkDisabledWarning OBJECT-TYPE SYNTAX INTEGER { ok(0), disabledBySNMPifAdminStatus(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP ifAdminStatus of the wireless interface has disabled wireless traffic" ::= { alarms 6 } dataPortDisabledWarning OBJECT-TYPE SYNTAX INTEGER { ok(0), disabledBySNMPifAdminStatus(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP ifAdminStatus of the data Ethernet interface has disabled Ethernet traffic" ::= { alarms 7 } dataPortFiberStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), installedFiberNotLicensed(1), noFiberLinkEstablishedButLOSNotDetected(2), noFiberLinkEstablishedAndLOSDetected(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the fiber interface on the data Ethernet port is not OK, there are three possible causes: 1) the fiber interface has been installed but disabled, 2) the interface could not be established even though no LOS was detected (i.e. an optical carrier was detected, which could be due to a broken TX fiber, or because the interface is disabled at the other end of the fiber link), or 3) the interface could not be established and LOS is detected (i.e. no optical carrier is detected). NB: a change of status may generate an SNMP trap and/or SMTP email alert" ::= { alarms 8 } dataPortConfigurationMismatch OBJECT-TYPE SYNTAX INTEGER { noError(0), mismatchDetected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The detection of Ethernet fragments (runt packets) on the data Ethernet port when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch" ::= { alarms 9 } managementPortDisabledWarning OBJECT-TYPE SYNTAX INTEGER { ok(0), disabledBySNMPifAdminStatus(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP ifAdminStatus of the out-of-band management Ethernet interface has disabled Ethernet traffic" ::= { alarms 12 } rFUStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), fault(1), unknown3(2), inReset(3), downloadInProgress(4), incompatibleFirmwareVersion(5), incompatibleDevice(6), iFICardAttached(7), noResponse(8), powerSupplyFault(9), powerSupplyDisabled(10), switchingmemorybanks(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the RFU. A state of 'ok' indicates that the RFU is fully operational, although may not be transmitting." ::= { alarms 16 } managementPortConfigurationMismatch OBJECT-TYPE SYNTAX INTEGER { noError(0), mismatchDetected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The detection of Ethernet fragments (runt packets) on the out-of-band management Ethernet port when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch" ::= { alarms 17 } secureModeAlarm OBJECT-TYPE SYNTAX INTEGER { secureModeIsActive(0), secureModeIsNotConfigured(1), secureModeIsConfiguredButNotActive(2), secureModeIsNotSupported(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The secure mode (e.g. FIPS, UC-APL) state of the unit. The secure mode is not configured(1) state indicates that the unit is capable of secure mode operation, and one or more of the following security materials has not been configured: Key Of Keys, Private Key, Public Certificate, DRNG Entropy Status, Wireless Encryption Key. The secure mode mode is configured but not active(2) state indicates that the unit is capable of secure mode operation, and the security material has been configured, but the configuration of interfaces is not consistent with secure mode operation. The secure mode is not supported(3) state indicates that the unit is not capable of secure mode operation. The secure mode capability requires appropriate hardware compatibility, license key and software image." ::= { alarms 18 } rFUPlatformCompatibility OBJECT-TYPE SYNTAX INTEGER { ok(0), mismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates when the RFU currently connected to the CMU does not match the RFU Platform which was installed. Either re-run the Installation Wizard or connect the correct RFU" ::= { alarms 19 } rFUProtectionCompatibility OBJECT-TYPE SYNTAX INTEGER { ok(0), mismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates when the IRFU branching unit configuration is not compatible with the protection configuration or if the left hand transceiver has been configured as Secondary or the right hand transceiver has been configured as Primary" ::= { alarms 20 } -- Smtp group attribute definitions -- sMTPEmailAlert OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Simple Mail Transfer Protocol is used to send equipment alerts via email to a specified email address. This utility can only be configured by the system administrator" ::= { smtp 1 } sMTPServerIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the SMTP server" ::= { smtp 2 } sMTPServerPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the SMTP server" ::= { smtp 3 } sMTPSourceEmailAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The 'from' email address used when constructing the automatically generated e-mail message" ::= { smtp 4 } sMTPDestinationEmailAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The 'to' email address used when constructing the automatically generated e-mail message" ::= { smtp 5 } sMTPEnabledMessages OBJECT-TYPE SYNTAX BITS { protectionState(3), enabledDiagnosticAlarms(4), managementPortUpDown(5), dataPortUpDown(6), wirelessLinkUpDown(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls which SMTP messages the unit will send" ::= { smtp 6 } -- SnmpControl group attribute definitions -- sNMPPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP port number used to access the SNMP MIB (i.e. Gets and Sets). NB: A system reboot is required to activate changes to this attribute" ::= { snmpControl 1 } sNMPCommunityString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP community string. NB: A system reboot is required to activate changes to this attribute" ::= { snmpControl 2 } sNMPTrapVersion OBJECT-TYPE SYNTAX INTEGER { v1(0), v2c(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP protocol version to use for SNMP Traps." ::= { snmpControl 5 } sNMPEnabledTraps OBJECT-TYPE SYNTAX BITS { protectionState(1), authenticationFailure(2), enabledDiagnosticAlarms(3), managementPortUpDown(4), dataPortUpDown(5), wirelessLinkUpDown(6), coldStart(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This controls which SNMP Traps the unit will send" ::= { snmpControl 6 } enabledDiagnosticAlarms OBJECT-TYPE SYNTAX BITS { dataPortConfigurationMismatch(0), wirelessLinkDisabledWarning(1), wirelessLinkStatus(2), sNTPSync(3), encryptionEnabledMismatch(4), unitOutOfCalibration(5), linkNameMismatch(6), alignmentMode(7), syslogDisabledWarning(8), managementPortStatus(9), dataPortStatus(10), rFUStatus(11), managementPortDisabledWarning(12), managementPortConfigurationMismatch(13), dataPortFiberStatus(14), dataPortDisabledWarning(15), syslogClientDisabledWarning(19), rFUPowerButtonPressed(20), secureMode(21), syslogLocalWrapped(22), syslogLocalNearlyFull(23) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which individual diagnostic alarms are enabled." ::= { snmpControl 7 } enabledDiagnosticProtectionAlarms OBJECT-TYPE SYNTAX BITS { endWirelessReceiveSignalStatus(0), protectionInterfaceStatus(1), managementPortEthernetSpeedStatus(2), dataPortEthernetSpeedStatus(3), licensedTransmitCapacityStatus(4), wirelessReceiveSignalStatus(5), protectionConfigurationStatus(6), protectionAvailabilityStatus(7), rxDiversityAvailabilityStatus(13), rxDiversityConfigurationStatus(14), rxDiversityDataPortStatus(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which individual diagnostic protection alarms are enabled." ::= { snmpControl 8 } sNMPTrapTableNumber OBJECT-TYPE SYNTAX INTEGER (2) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the sNMPTrapTable." ::= { snmpControl 9 } -- SNMPTrapTable group attribute definitions -- sNMPTrapTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNMP trap value, used to index the SNMPTrapTable." ::= { sNMPTrapTableEntry 1 } sNMPTrapIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address to which all SNMP Traps are sent. An IP Address of 0.0.0.0 disables all TRAP generation. NB: A system reboot is required to activate changes to this attribute." ::= { sNMPTrapTableEntry 2 } sNMPTrapPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Destination port for SNMP Traps (default=162). A value of 0 will disable the trap receiver. NB: A system reboot is required to activate changes to this attribute." ::= { sNMPTrapTableEntry 3 } -- Sntp group attribute definitions -- sNTPState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "SNTP control state" ::= { sntp 1 } sNTPPollInterval OBJECT-TYPE SYNTAX INTEGER (60..43200) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNTP server polling interval" ::= { sntp 4 } sNTPSync OBJECT-TYPE SYNTAX INTEGER { noSync(0), inSync(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "If SNTP Sync fails then check the server settings in the Remote Management page, or disable SNTP. NB: a change of state may generate an SNMP trap and/or SMTP email alert" ::= { sntp 5 } sNTPLastSync OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last SNTP sync time" ::= { sntp 6 } systemClock OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "System clock presented as local time" ::= { sntp 7 } timeZone OBJECT-TYPE SYNTAX INTEGER { gmtMinus1200(0), gmtMinus1130(1), gmtMinus1100(2), gmtMinus1030(3), gmtMinus1000(4), gmtMinus0930(5), gmtMinus0900(6), gmtMinus0830(7), gmtMinus0800(8), gmtMinus0730(9), gmtMinus0700(10), gmtMinus0630(11), gmtMinus0600(12), gmtMinus0530(13), gmtMinus0500(14), gmtMinus0430(15), gmtMinus0400(16), gmtMinus0330(17), gmtMinus0300(18), gmtMinus0230(19), gmtMinus0200(20), gmtMinus0130(21), gmtMinus0100(22), gmtMinus0030(23), gmtZero(24), gmtPlus0030(25), gmtPlus0100(26), gmtPlus0130(27), gmtPlus0200(28), gmtPlus0230(29), gmtPlus0300(30), gmtPlus0330(31), gmtPlus0400(32), gmtPlus0430(33), gmtPlus0500(34), gmtPlus0530(35), gmtPlus0600(36), gmtPlus0630(37), gmtPlus0700(38), gmtPlus0730(39), gmtPlus0800(40), gmtPlus0830(41), gmtPlus0900(42), gmtPlus0930(43), gmtPlus1000(44), gmtPlus1030(45), gmtPlus1100(46), gmtPlus1130(47), gmtPlus1200(48), gmtPlus1230(49), gmtPlus1300(50) } MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone offsets from Greenwich Mean Time (GMT)" ::= { sntp 8 } daylightSaving OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Daylight Saving Time" ::= { sntp 9 } sNTPPrimaryServer OBJECT-TYPE SYNTAX INTEGER { server1(0), server2(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the primary SNTP server, determining the order in which the servers are tried." ::= { sntp 10 } sNTPPrimaryServerDeadTime OBJECT-TYPE SYNTAX INTEGER (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "Time (in seconds) to wait before retrying communications with an unresponsive primary SNTP server. Setting the value to 0 disables the timer." ::= { sntp 11 } sNTPServerRetries OBJECT-TYPE SYNTAX INTEGER (0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of times the PTP will retry after an SNTP server fails to respond." ::= { sntp 12 } sNTPServerTimeout OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Time (in seconds) the PTP will wait for a response from an SNTP server." ::= { sntp 13 } sNTPServerTableNumber OBJECT-TYPE SYNTAX INTEGER (2) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the SNTPServerTable." ::= { sntp 14 } -- SNTPServerTable group attribute definitions -- sNTPServerTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index range for the SNTPServerTable." ::= { sNTPServerTableEntry 1 } sNTPServerIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of a valid SNTP server" ::= { sNTPServerTableEntry 2 } sNTPServerPortNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP port number of the SNTP server. Defaults to port 123." ::= { sNTPServerTableEntry 3 } sNTPServerResponse OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent response received from the SNTP server, if used" ::= { sNTPServerTableEntry 4 } -- Reset group attribute definitions -- systemReset OBJECT-TYPE SYNTAX INTEGER { running(0), consoleReboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this attribute to '1' will cause a system reboot. NB: a system reboot will apply any pending new settings held in memory" ::= { reset 1 } -- Versions group attribute definitions -- softwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current software version" ::= { versions 1 } hardwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware platform version" ::= { versions 2 } secondarySoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary software version, used when the primary software image is invalid or erased" ::= { versions 3 } bootVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Boot code software version" ::= { versions 4 } -- PubStats group attribute definitions -- receiveDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data rate received by the wireless interface. Expressed in kbps, rounded down to nearest 100 kbps." ::= { pubStats 1 } transmitDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data rate transmitted from the wireless interface. Expressed in kbps, rounded down to nearest 100 kbps." ::= { pubStats 2 } aggregateDataRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total data rate across the wireless interface summed over both link directions. Expressed in kbps, rounded down to nearest 100 kbps." ::= { pubStats 3 } wirelessLinkAvailability OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time that the unit has been able to successfully demodulate the signal transmitted from the remote end of the link. Calculated since the last reset of the system counters. The reported value is the percentage multiplied by 10000." ::= { pubStats 4 } wirelessLinkStatus OBJECT-TYPE SYNTAX INTEGER { up(0), registering(1), searching(2), acquiring(3), radarCAC(4), initialising(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the wireless link" ::= { pubStats 5 } byteErrorRatio OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The byte error ratio calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12." ::= { pubStats 6 } codeWordErrorRatio OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The wireless link sends data in error correctable blocks called code words. This attribute reports the ratio of uncorrected code words to the total number of code words received since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12." ::= { pubStats 8 } -- Encryption group attribute definitions -- encryptionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(0), aESRijndael(1), aES256bitRijndael(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Encryption Algorithm used by the wireless link. NB: A system reboot is required to activate changes to this attribute. NB: The same Encryption Algorithm must be configured at BOTH ends of the link for it to function correctly" ::= { encryption 1 } -- Rfu group attribute definitions -- rFURfBand OBJECT-TYPE SYNTAX INTEGER (6000..38000) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU RF band in MHz" ::= { rfu 1 } rFUTxBandAboveRx OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Yes means RFU transmitter frequency band is above receiver frequency band" ::= { rfu 2 } rFUFreqSpacing OBJECT-TYPE SYNTAX INTEGER (0..1560000) MAX-ACCESS read-only STATUS current DESCRIPTION "Tx-Rx frequency spacing in kHz" ::= { rfu 3 } rFUTxPowerMin OBJECT-TYPE SYNTAX INTEGER (-100..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum transmitter power level, in 10ths of dBm" ::= { rfu 4 } rFUTxPowerMax OBJECT-TYPE SYNTAX INTEGER (160..370) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transmitter power level, in 10ths of dBm" ::= { rfu 5 } rFURxFreqMin OBJECT-TYPE SYNTAX INTEGER (5725000..41000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum receiver frequency in kHz" ::= { rfu 6 } rFURxFreqMax OBJECT-TYPE SYNTAX INTEGER (5725000..41000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum receiver frequency in kHz" ::= { rfu 7 } rFUTxFreqMin OBJECT-TYPE SYNTAX INTEGER (5725000..41000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum transmitter frequency in kHz" ::= { rfu 8 } rFUTxFreqMax OBJECT-TYPE SYNTAX INTEGER (5725000..41000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum transmitter frequency in kHz" ::= { rfu 9 } rFUSerial OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU serial number" ::= { rfu 10 } rFUActiveFirmwareBank OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU active firmware bank number" ::= { rfu 11 } rFUVersionBank1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU firmware version number (nnn/ddMMYY) in bank 1" ::= { rfu 12 } rFUVersionBank2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU firmware version number (nnn/ddMMYY) in bank 2" ::= { rfu 13 } rFUType OBJECT-TYPE SYNTAX DisplayString (SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "RFU type as: RFU platform, frequency band, Tx-Rx frequency spacing, Hi/Lo band and transmit frequency range" ::= { rfu 14 } rFURxRFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU RF receiver out of lock alarm" ::= { rfu 15 } rFUTxRFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU RF transmitter out of lock alarm" ::= { rfu 16 } rFUTxPowerAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), txOutputFailed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU transmitter output failed alarm" ::= { rfu 17 } rFUCommonIFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm indicating when the common IF RFU synthesizer is out of lock" ::= { rfu 18 } rFUPowerAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), powerFailed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU general power alarm" ::= { rfu 19 } rFULockoutAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), lockedOut(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU locked pending unlock code alarm" ::= { rfu 20 } rFUCableAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), iFCableVoltageOutOfRange(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU cable detector voltage out of range alarm" ::= { rfu 21 } rFUCableAttenuationAdjustAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), iFCableAttenuatorAdjusting(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU cable attenuator not yet adjusted alarm" ::= { rfu 22 } rFUTxPowerDegradedAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), degraded(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates when the current transmit power is more than 3 dB below or more than 3 dB above the correct transmit power." ::= { rfu 23 } rFURpsAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), rPSAlarmActive(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU radio protection switch (RPS) alarm" ::= { rfu 24 } rFUTxMuteStatus OBJECT-TYPE SYNTAX INTEGER { transmitting(0), mutedByUser(1), mutedDueToConfigurationError(2), mutedDueToRFUFault(3), mutedDueToRFUConfiguring(4), mutedDueToRFUIncompatiblewithCMU(5), mutedDueToInactive(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RFU is transmitting or muted. If it is muted, it will also indicate the reason." ::= { rfu 25 } rFUFanAssemblyAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), partialFanFailure(1), totalFanFailure(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates when the IRFU transceiver fan assembly has failed. The assembly consists of two fans and if one fan fails, the this will report partial failure. If both fans fail, this will report total failure" ::= { rfu 26 } rFUHighTemperatureAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), highTemperature(1), veryHighTemperature(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates when the temperature of the IRFU transceiver has risen above either of two thresholds. If the temperature exceeds the High Temperature threshold, the transmit power may reduce. If the temperature exceeds the Very High Temperature threshold, the transceiver will mute the transmitter" ::= { rfu 27 } rFURFSwitchAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), fault(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates that an RF switch is not present when it should be or that on the most recent attempt to make this unit active, the IRFU RF Switch was not able to switch to the correct position" ::= { rfu 28 } rFURxIFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU IF receiver out of lock alarm" ::= { rfu 29 } rFUTxIFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "RFU IF transmitter out of lock alarm" ::= { rfu 30 } rFUPowerButtonPressed OBJECT-TYPE SYNTAX INTEGER { ok(0), iRFUPowerButtonwaspressed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "IRFU power button have been pressed, IFRU has powered down unexpectedly" ::= { rfu 31 } rFUConnectedPlatform OBJECT-TYPE SYNTAX INTEGER { unknown(0), oDUA(1), oDUB(2), iRFUHP(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of RFU platform currently connected to the CMU" ::= { rfu 32 } rFUCommonRFSynthLockAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), outOfLock(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm indicating when the common RFU RF synthesizer is out of lock" ::= { rfu 33 } rFUBranchingConfiguration OBJECT-TYPE SYNTAX INTEGER { rFU1plus0(0), rFU1plus0MHSBReadyEqual(1), rFU1plus0MHSBReadyUnequal(2), rFU1plus1MHSBEqual(3), rFU1plus1MHSBUnequal(4), rFU1plus1TxMHSBRxSD(5), rFU2plus0(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "When an IRFU is being installed, the configuration of the IRFU branching unit must be configured. Please see the User Guide for further details" ::= { rfu 34 } rFUTransceiverLocation OBJECT-TYPE SYNTAX INTEGER { leftTRxA(0), rightTRxB(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When a 2+0 IRFU is being installed, the user must configure which of the two IRFU transceivers the CMU is controlling in order to ensure correct operation" ::= { rfu 35 } rFURfSwitchCableAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), fault(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The RF switch in the IRFU is indicating an invalid switch position. The most likely cause is a fault or a disconnection of the cable which connects the transceiver to the RF switch" ::= { rfu 36 } rFUReceiveBranchingUnitLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The receive loss in the IRFU branching unit, expressed in tenths of a dB. The branching unit is a component of the IRFU which is situated between the IRFU transceiver and IRFU antenna port. It provides the necessary filtering, isolation and coupling." ::= { rfu 37 } rFUTransmitBranchingUnitLoss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmit loss in the IRFU branching unit, expressed in tenths of a dB. The branching unit is a component of the IRFU which is situated between the IRFU transceiver and IRFU antenna port. It provides the necessary filtering, isolation and coupling." ::= { rfu 38 } -- RadioLicense group attribute definitions -- radioLicenseIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license identifier" ::= { radioLicense 1 } radioLicenseBand OBJECT-TYPE SYNTAX INTEGER { bandLower6GHz(0), band7GHz(1), band8GHz(2), band11GHz(3), band13GHz(4), band15GHz(5), band18GHz(6), band23GHz(7), band26GHz(8), band32GHz(9), band38GHz(10), bandUpper6GHz(11), band28GHz(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license band" ::= { radioLicense 2 } radioLicenseRegion OBJECT-TYPE SYNTAX INTEGER { eTSI(0), fCC(1), canada(2), brazil(3), nTIA(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license region" ::= { radioLicense 3 } radioLicenseTxFreq OBJECT-TYPE SYNTAX INTEGER (5925000..40105000) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license transmit frequency in kHz" ::= { radioLicense 4 } radioLicenseRxFreq OBJECT-TYPE SYNTAX INTEGER (5925000..40105000) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license receive frequency in kHz" ::= { radioLicense 5 } radioLicenseBandwidth OBJECT-TYPE SYNTAX INTEGER { bw7MHz(0), bw10MHz(1), bw1375MHz(2), bw14MHz(3), bw20MHz(4), bw275MHz(5), bw28MHz(6), bw30MHz(7), bw40MHz(8), bw50MHz(9), bw55MHz(10), bw56MHz(11), bw80MHz(12), bw25MHz(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license bandwidth" ::= { radioLicense 6 } radioLicenseMaxEIRP OBJECT-TYPE SYNTAX INTEGER (-300..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Effective Isotropic Radiated Power (EIRP) permitted by the license. Expressed in 10ths of dBm" ::= { radioLicense 7 } radioLicenseModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license modulation" ::= { radioLicense 8 } radioLicenseCodeRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio license code rate, multiplied by 100 to give two decimal places of precision" ::= { radioLicense 9 } radioLicenseIncompatibleAlarm OBJECT-TYPE SYNTAX INTEGER { ok(0), radioLicenseIncompatiblewithRFU(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the radio license is incompatible with the attached RFU. Re-run Installation to correct the issue" ::= { radioLicense 10 } radioLicenseMinModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Certain licensing authorities, for example FCC and Industry Canada, require adaptive modulation to be bound by a minimum and maximum modulation mode as defined by the radio license. This attribute is only of significance in such regions and when adaptive modulation is enabled. For other regions, for example ETSI, minimum and maximum modulation mode are directly adjustable by the user and are not defined by the radio license. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This integer attribute identifies the modulation aspect of the RadioLicenseMinModMode attribute required by the radio license. For example, if RadioLicenseMinModMode is configured for 16QAM 0.79, this attribute will be set to a value of 2 which identifies a modulation of 16QAM." ::= { radioLicense 11 } radioLicenseMinCodeRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Certain licensing authorities, for example FCC and Industry Canada, require adaptive modulation to be bound by a minimum and maximum modulation mode as defined by the radio license. This attribute is only of significance in such regions and when adaptive modulation is enabled. For other regions, for example ETSI, minimum and maximum modulation mode are directly adjustable by the user and are not defined by the radio license. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This attribute is equal to 100 times the code rate aspect of the RadioLicenseMinModMode attribute required by the radio license. For example, if RadioLicenseMinModMode is configured for QPSK 0.80, this attribute will read 80." ::= { radioLicense 12 } radioLicenseMaxModulation OBJECT-TYPE SYNTAX INTEGER { modQPSK(0), mod8PSK(1), mod16QAM(2), mod32QAM(3), mod64QAM(4), mod128QAM(5), mod256QAM(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Certain licensing authorities, for example FCC and Industry Canada, require adaptive modulation to be bound by a minimum and maximum modulation mode as defined by the radio license. This attribute is only of significance in such regions and when adaptive modulation is enabled. For other regions, for example ETSI, minimum and maximum modulation mode are directly adjustable by the user and are not defined by the radio license. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This integer attribute identifies the modulation aspect of the RadioLicenseMaxModMode attribute required by the radio license. For example, if RadioLicenseMaxModMode is configured for 256QAM 0.91, this attribute will be set to a value of 6 which identifies a modulation of 256QAM." ::= { radioLicense 13 } radioLicenseMaxCodeRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Certain licensing authorities, for example FCC and Industry Canada, require adaptive modulation to be bound by a minimum and maximum modulation mode as defined by the radio license. This attribute is only of significance in such regions and when adaptive modulation is enabled. For other regions, for example ETSI, minimum and maximum modulation mode are directly adjustable by the user and are not defined by the radio license. In general, a modulation mode is defined by two aspects, a modulation and a code rate. This attribute is equal to 100 times the code rate aspect of the RadioLicenseMaxModMode attribute required by the radio license. For example, if RadioLicenseMaxModMode is configured for 256QAM 0.91, this attribute will read 91." ::= { radioLicense 14 } -- ProtectionConfig group attribute definitions -- protection OBJECT-TYPE SYNTAX INTEGER { disabled(0), hotStandby1plus1(1), hotStandby1plus1withRxDiversity(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "PTP 800 supports a 1+1 Hot Standby configuration where the wireless link is protected against hardware failure. This requires the installation of redundant equipment at each end of the wireless link including a secondary CMU and RFU. At a given end of the wireless link, only one CMU / RFU is Active at any one time, the neighbor CMU / RFU being Inactive. When a fault is detected on the Active CMU / RFU, the Active role will automatically switch to the Inactive CMU / RFU. To enable functionality associated with this feature, this attribute must be configured for a setting of 1+1." ::= { protectionConfig 1 } faultProtectionSwitching OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, protection switching on detection of a fault can be enabled/disabled using this attribute." ::= { protectionConfig 2 } primarySecondaryMode OBJECT-TYPE SYNTAX INTEGER { primary(0), secondary(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, one CMU must be configured as Primary, the other CMU as Secondary. When a Protected Link initialises with no faults, the CMUs configured as Primary will become the Active CMUs, that is, the Primary CMUs are the preferred CMUs. When RFUs are connected to the antenna via an Asymmetric Coupler, the RFU which is connected to the Primary CMU should be connected to the Main path of the coupler. This is the path with the lowest loss." ::= { protectionConfig 3 } numberOfAntennas OBJECT-TYPE SYNTAX INTEGER { one(0), two(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This must be configured to match the number of antennas installed at this end of the link." ::= { protectionConfig 4 } primaryRecovery OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, the CMU configured as Primary is the preferred unit to take the Active role. If the Primary Recovery attribute is set to Enabled at a given end, a protection switch back to the preferred Primary CMU / RFU will occur autonomously if it has stayed free of faults for a configurable period of time determined by the Primary Recovery Period." ::= { protectionConfig 5 } primaryRecoveryPeriod OBJECT-TYPE SYNTAX INTEGER (0..2880) MAX-ACCESS read-write STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, the CMU configured as Primary is the preferred unit to take the Active role. If the Primary Recovery attribute is set to Enabled at a given end, a protection switch back to the preferred Primary CMU / RFU will occur autonomously if it has stayed free of faults for a configurable period of time determined by the Primary Recovery Period." ::= { protectionConfig 6 } requestedProtectionState OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, only one CMU / RFU at a given end of the link is Active at any one time, the neighbor CMU / RFU being Inactive. Use the Requested Protection State attribute to request whether this CMU / RFU should be in the Active or Inactive state." ::= { protectionConfig 7 } antennaReceiveLevelDeltaThreshold OBJECT-TYPE SYNTAX INTEGER (0..30) MAX-ACCESS read-write STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, a CMU will raise an alarm to the management system when the measured receive level adjusted by antenna gain and feeder loss is less than that of its neighbor by more than the Antenna Receive Level Delta Threshold." ::= { protectionConfig 8 } antennaReceiveLevelMeasurementWindow OBJECT-TYPE SYNTAX INTEGER (1..2880) MAX-ACCESS read-write STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, a CMU will raise an alarm to the management system when the measured receive level adjusted by antenna gain and feeder loss is less than that of its neighbor by more than the Antenna Receive Level Delta Threshold. The measurements are averaged over the most recent Antenna Receive Level Measurement Window." ::= { protectionConfig 9 } fiberY OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "One or both ends of a 1+1 Hot Standby system can be connected to the network using an 'Optical-Y Splitter Kit per end'. This end configuration provides a single fiber interface to the network. Any end which is connected to the network using this method must have the Fiber Y attribute set to Enabled. Please note: CMUs must be loaded with boot code version 03-00 or later and recovery version 04-00 or later for Fiber Y to work correctly." ::= { protectionConfig 12 } rxDiversityVlanTpid OBJECT-TYPE SYNTAX INTEGER { iEEE8021QTaggedCTagType8100(0), iEEE8021adTaggedSTagorBTagType88a8(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When Receive Diversity is enabled, the Inactive CMU sends Rx Diversity Ethernet Frames to the Active CMU. These Ethernet Frames must be VLAN tagged and this attribute controls whether the frames are tagged using the TPID defined by 802.1Q or the TPID defined by 802.1ad." ::= { protectionConfig 14 } rxDiversityVid OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "When Receive Diversity is enabled, the Inactive CMU sends Rx Diversity Ethernet Frames to the Active CMU. These Ethernet Frames must be VLAN tagged and this attribute controls the VLAN Identifier" ::= { protectionConfig 15 } -- ProtectionStatus group attribute definitions -- protectionAvailabilityStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), notProtected(1), notProtecting(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Protection Availability Status attribute indicates whether the Active unit is currently being protected by the Inactive unit. If it isn't being protected, the Active unit will report Not Protected and the Inactive unit will report Not Protecting." ::= { protectionStatus 2 } protectionConfigurationStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), configurationNotProtecting(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, this attribute will indicate whether the configuration will support protection." ::= { protectionStatus 3 } protectionState OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, only one CMU / RFU at a given end of the link is Active at any one time, the neighbor CMU / RFU being Inactive. The Protection State attribute indicates whether a CMU / RFU is in the Active or Inactive state." ::= { protectionStatus 4 } activeUnit OBJECT-TYPE SYNTAX INTEGER { primary(0), secondary(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "At a given end of a 1+1 Hot Standby configuration, one CMU must be configured as Primary, the other CMU as Secondary. When a Protected Link initialises with no faults, the CMU configured as Primary will become the Active CMU, that is, the Primary CMU is the preferred CMUs. The Active Unit attribute indicates whether the active unit is configured as Primary or Secondary." ::= { protectionStatus 5 } protectionSwitchCause OBJECT-TYPE SYNTAX INTEGER { noPreviousProtectionSwitch(0), neighborCMUConnectedButNotResponding(1), rFUNotResponding(2), rFURxRFSynthOutofLock(3), rFUTxRFSynthOutofLock(4), rFUCommonRFSynthOutofLock(5), rFUCableFailure(6), rFUCableAttenuatorAdjustmentFailure(7), rFUTxPowerDegraded(8), dataPortDown(9), managementPortDown(10), wirelessReceiveSignalNotDetected(11), byteErrorRatioOverThreshold(12), codeWordErrorRatioOverThreshold(13), cMURebooting(14), configurationNotProtecting(15), wirelessReceiveSignalNotDetectedatRemoteEnd(16), byteErrorRatioOverThresholdatRemoteEnd(17), codeWordErrorRatioOverThresholdatRemoteEnd(18), multipleReceiveFailureatRemoteEnd(19), primaryRecovery(20), managedProtectionSwitch(21), rFURxIFSynthOutofLock(22), rFUTxIFSynthOutofLock(23), rFUCommonIFSynthOutofLock(24), rFUVeryHighTemperature(25) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Protection Switch Cause attribute reports the reason for the last protection switch." ::= { protectionStatus 6 } endId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the End Id contains the IP address of neighboring CMUs starting with the highest IP address and with a space separating the addresses. It is a single identifier of neighboring CMUs." ::= { protectionStatus 7 } neighborIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Neighbor IP Address identifies the IP Address of the neighbor CMU connected via the Protection Interface." ::= { protectionStatus 8 } neighborMACAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Neighbor MAC Address identifies the MAC Address of the neighbor CMU connected via the Protection Interface." ::= { protectionStatus 9 } wirelessReceiveSignalStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), notDetected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Wireless Receive Signal Status indicates if the receiver is able to demodulate the transmit signal from the remote end of the link. If it cannot demodulate the signal, a protection switch may occur in a system configured for 1+1 Hot Standby." ::= { protectionStatus 10 } licensedTransmitCapacityStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), lessThanNeighbor(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Licensed Transmit Capacity Status attribute indicates when the Licensed Transmit Capacity is below that of its neighbor." ::= { protectionStatus 14 } dataPortEthernetSpeedStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), lessThanNeighbor(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Data Port Ethernet Speed Status attribute indicates if the Ethernet Speed of the Data Port is below that of its neighbor." ::= { protectionStatus 15 } managementPortEthernetSpeedStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), lessThanNeighbor(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Management Port Ethernet Speed Status attribute indicates if the Ethernet Speed of the Management Port is below that of its neighbor." ::= { protectionStatus 16 } protectionInterfaceStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), neighborNotResponding(1), neighborNotConnected(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, information is shared between neighbor CMUs over the Protection Interface. The Protection Interface Status attribute reports whether the neighbor CMU is successfully responding, physically disconnected or whether it is physically connected but not responding, e.g. powered down." ::= { protectionStatus 17 } remotePrimaryIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Remote Primary IP Address reports the IP address of the CMU which is configured as Primary at the remote end of the wireless link." ::= { protectionStatus 18 } remoteSecondaryIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Remote Secondary IP Address reports the IP address of the CMU which is configured as Secondary at the remote end of the wireless link." ::= { protectionStatus 19 } remotePrimaryMACAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Remote Primary MAC Address reports the MAC address of the CMU which is configured as Primary at the remote end of the wireless link." ::= { protectionStatus 20 } remoteSecondaryMACAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Remote Secondary MAC Address reports the MAC address of the CMU which is configured as Secondary at the remote end of the wireless link." ::= { protectionStatus 21 } remotePrimarySecondaryMode OBJECT-TYPE SYNTAX INTEGER { primary(0), secondary(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, this attribute identifies whether the Active Unit at the remote end of the link is configured as Primary or Secondary." ::= { protectionStatus 22 } transmitterStatus OBJECT-TYPE SYNTAX INTEGER { muted(0), transmitting(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the RFU is transmitting or muted. In a 1+1 Hot Standby configuration, it will also indicate if the RFU is Inactive and therefore ready to transmit." ::= { protectionStatus 23 } endWirelessReceiveSignalStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), notDetected(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The End Wireless Receive Signal Status indicates if the end of a link is unable to demodulate the signal transmitted from the remote end of the link. When Protection is set to 1+1 Hot Standby, this attribute will indicate Not Detected if the Active CMU is unable to demodulate the wireless signal. When Receive Diversity is enabled, this attribute will indicate Not Detected if both the Active and Inactive CMUs are unable to demodulate the wireless signal." ::= { protectionStatus 26 } rxDiversityDataPortStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), notProtecting(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "When Receive Diversity is enabled, the Inactive CMU sends Rx Diversity Ethernet Frames to the Active CMU. Before sending these frames, the Data Port MUST be negotiated at 1000 Mbps. This attribute indicates if this is not the case" ::= { protectionStatus 27 } rxDiversityAvailabilityStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), notProtected(1), notProtecting(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Rx Diversity Availability Status attribute will indicate when Receive Diversity is not operating correctly, either due to a fault or due to an incorrect configuration" ::= { protectionStatus 28 } rxDiversityConfigurationStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), configurationNotProtecting(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "For Receive Diversity to operate correctly, certain attributes must be configured correctly on both neighbor CMUs. The Rx Diversity Configuration Status attribute will indicate when this is not the case" ::= { protectionStatus 29 } rxDiversityNeighborCompatibility OBJECT-TYPE SYNTAX INTEGER { ok(0), mismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "For Receive Diversity to operate correctly, both neighbor CMUs must both be configured with the Protection attribute set to 1+1 Hot Standby with Rx Diversity. The Rx Diversity Neighbor Compatibility attribute indicates when the neighbor CMU is configured to a different setting" ::= { protectionStatus 30 } rxDiversityVlanTpidNeighborCompatibility OBJECT-TYPE SYNTAX INTEGER { ok(0), mismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "For Receive Diversity to operate correctly, both neighbor CMUs must be configured with the same value of Rx Diversity VLAN TPID. The Rx Diversity VLAN TPID Neighbor Compatibility attribute indicates when this is not the case" ::= { protectionStatus 31 } rxDiversityVidNeighborCompatibility OBJECT-TYPE SYNTAX INTEGER { ok(0), mismatch(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "For Receive Diversity to operate correctly, both neighbor CMUs must be configured with the same value of Rx Diversity VID. The Rx Diversity VID Neighbor Compatibility attribute indicates when this is not the case" ::= { protectionStatus 32 } -- ProtectionStats group attribute definitions -- activeCodeWordCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Active Code Word Count reports the number of code words received over the wireless interface whilst the CMU / RFU is in the Active role of a 1+1 Hot Standby configuration. The count is since the last statistics reset." ::= { protectionStats 1 } activeCodeWordErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Active Code Word Error Count reports the number of code word errors which have been detected at the wireless interface whilst the CMU / RFU is in the Active role of a 1+1 Hot Standby configuration. The count is since the last statistics reset." ::= { protectionStats 2 } activeByteCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Active Byte Count reports the number of bytes received over the wireless interface whilst the CMU / RFU is in the Active role of a 1+1 Hot Standby configuration. The count is since the last statistics reset." ::= { protectionStats 3 } activeByteErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Active Byte Error Count reports the number of byte errors which have been detected at the wireless interface whilst the CMU / RFU is in the Active role of a 1+1 Hot Standby configuration. The count is since the last statistics reset." ::= { protectionStats 4 } activeAvailableTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Active Available Time reports the time which the Wireless Link Status has been Up whilst the CMU/RFU has been in the Active role of a 1+1 Hot Standby configuration. The reported time is since the last statistics reset." ::= { protectionStats 5 } activeCounterMeasurementPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "For a 1+1 Hot Standby link, the elapsed time that the Protection State of the unit has been in the active state since the last reset of the system counters." ::= { protectionStats 6 } activeWirelessLinkAvailability OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "For a 1+1 Hot Standby link, the percentage of time that the unit has been able to successfully demodulate the signal transmitted from the remote end of the link whilst the Protecion State of the unit has been active. This attribute is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the percentage multiplied by 10000" ::= { protectionStats 7 } activeCodeWordErrorRatio OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The wireless link sends data in error correctable blocks called code words. For a 1+1 Hot Standby link, this attribute reports the ratio of uncorrected code words to the total number of code words received whilst the Protecion State of the unit has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12" ::= { protectionStats 8 } activeByteErrorRatio OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "For a 1+1 Hot Standby link, the Byte Error Ratio measured by the unit whilst the Protecion State has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12" ::= { protectionStats 9 } -- SyslogControl group attribute definitions -- syslogClient OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the syslog client" ::= { syslogControl 1 } syslogState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog service has been enabled or disabled" ::= { syslogControl 2 } -- Supplementary group attribute definitions -- longitude OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) MAX-ACCESS read-write STATUS current DESCRIPTION "The longitude of the unit, measured in decimal degrees. This object is set by the SNMP manager and has no internal function." ::= { supplementary 1 } latitude OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) MAX-ACCESS read-write STATUS current DESCRIPTION "The latitude of the unit, measured in decimal degrees. This object is set by the SNMP manager and has no internal function." ::= { supplementary 2 } altitude OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The altitude of the unit, measured in metres. This object is set by the SNMP manager and has no internal function." ::= { supplementary 3 } -- Enterprise NOTIFICATION definitions -- dataPortStatusTrap NOTIFICATION-TYPE OBJECTS { dataPortStatus } STATUS current DESCRIPTION "Current status of the data Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert" ::= { ptpTrapPrefix 3 } linkNameMismatchTrap NOTIFICATION-TYPE OBJECTS { linkNameMismatch } STATUS current DESCRIPTION "Signaling was received with the wrong Link Name. Either the Link Name is configured differently at each end of the wireless link, or this unit is aligned to the wrong link partner. NB: A change of value during operation may generate an SNMP trap and/or SMTP email alert" ::= { ptpTrapPrefix 9 } alignmentModeTrap NOTIFICATION-TYPE OBJECTS { alignmentMode } STATUS current DESCRIPTION "Indicates if the unit is undergoing alignment. NB: a change of state during operation may generate an SNMP trap and/or SMTP email alert" ::= { ptpTrapPrefix 10 } unitOutOfCalibrationTrap NOTIFICATION-TYPE OBJECTS { unitOutOfCalibration } STATUS current DESCRIPTION "The unit is out of calibration" ::= { ptpTrapPrefix 11 } encryptionEnabledMismatchTrap NOTIFICATION-TYPE OBJECTS { encryptionEnabledMismatch } STATUS current DESCRIPTION "Encryption has been enabled on one end of the wireless link but not the other" ::= { ptpTrapPrefix 13 } wirelessLinkDisabledWarningTrap NOTIFICATION-TYPE OBJECTS { wirelessLinkDisabledWarning } STATUS current DESCRIPTION "The SNMP ifAdminStatus of the wireless interface has disabled wireless traffic" ::= { ptpTrapPrefix 16 } dataPortDisabledWarningTrap NOTIFICATION-TYPE OBJECTS { dataPortDisabledWarning } STATUS current DESCRIPTION "The SNMP ifAdminStatus of the data Ethernet interface has disabled Ethernet traffic" ::= { ptpTrapPrefix 17 } dataPortFiberStatusTrap NOTIFICATION-TYPE OBJECTS { dataPortFiberStatus } STATUS current DESCRIPTION "If the fiber interface on the data Ethernet port is not OK, there are three possible causes: 1) the fiber interface has been installed but disabled, 2) the interface could not be established even though no LOS was detected (i.e. an optical carrier was detected, which could be due to a broken TX fiber, or because the interface is disabled at the other end of the fiber link), or 3) the interface could not be established and LOS is detected (i.e. no optical carrier is detected). NB: a change of status may generate an SNMP trap and/or SMTP email alert" ::= { ptpTrapPrefix 18 } dataPortConfigurationMismatchTrap NOTIFICATION-TYPE OBJECTS { dataPortConfigurationMismatch } STATUS current DESCRIPTION "The detection of Ethernet fragments (runt packets) on the data Ethernet port when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch" ::= { ptpTrapPrefix 19 } sNTPSyncTrap NOTIFICATION-TYPE OBJECTS { sNTPSync } STATUS current DESCRIPTION "If SNTP Sync fails then check the server settings in the Remote Management page, or disable SNTP. NB: a change of state may generate an SNMP trap and/or SMTP email alert" ::= { ptpTrapPrefix 21 } managementPortStatusTrap NOTIFICATION-TYPE OBJECTS { managementPortStatus } STATUS current DESCRIPTION "Current status of the out-of-band management Ethernet link" ::= { ptpTrapPrefix 23 } managementPortDisabledWarningTrap NOTIFICATION-TYPE OBJECTS { managementPortDisabledWarning } STATUS current DESCRIPTION "The SNMP ifAdminStatus of the out-of-band management Ethernet interface has disabled Ethernet traffic" ::= { ptpTrapPrefix 24 } rFUStatusTrap NOTIFICATION-TYPE OBJECTS { rFUStatus } STATUS current DESCRIPTION "Current status of the RFU. A state of 'ok' indicates that the RFU is fully operational, although may not be transmitting." ::= { ptpTrapPrefix 27 } managementPortConfigurationMismatchTrap NOTIFICATION-TYPE OBJECTS { managementPortConfigurationMismatch } STATUS current DESCRIPTION "The detection of Ethernet fragments (runt packets) on the out-of-band management Ethernet port when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch" ::= { ptpTrapPrefix 28 } wirelessLinkStatusTrap NOTIFICATION-TYPE OBJECTS { wirelessLinkStatus } STATUS current DESCRIPTION "Current status of the wireless link" ::= { ptpTrapPrefix 29 } protectionAvailabilityStatusTrap NOTIFICATION-TYPE OBJECTS { protectionAvailabilityStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Protection Availability Status attribute indicates whether the Active unit is currently being protected by the Inactive unit. If it isn't being protected, the Active unit will report Not Protected and the Inactive unit will report Not Protecting." ::= { ptpTrapPrefix 31 } protectionConfigurationStatusTrap NOTIFICATION-TYPE OBJECTS { protectionConfigurationStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, this attribute will indicate whether the configuration will support protection." ::= { ptpTrapPrefix 32 } protectionStateTrap NOTIFICATION-TYPE OBJECTS { protectionState } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, only one CMU / RFU at a given end of the link is Active at any one time, the neighbor CMU / RFU being Inactive. The Protection State attribute indicates whether a CMU / RFU is in the Active or Inactive state." ::= { ptpTrapPrefix 33 } wirelessReceiveSignalStatusTrap NOTIFICATION-TYPE OBJECTS { wirelessReceiveSignalStatus } STATUS current DESCRIPTION "The Wireless Receive Signal Status indicates if the receiver is able to demodulate the transmit signal from the remote end of the link. If it cannot demodulate the signal, a protection switch may occur in a system configured for 1+1 Hot Standby." ::= { ptpTrapPrefix 34 } licensedTransmitCapacityStatusTrap NOTIFICATION-TYPE OBJECTS { licensedTransmitCapacityStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Licensed Transmit Capacity Status attribute indicates when the Licensed Transmit Capacity is below that of its neighbor." ::= { ptpTrapPrefix 36 } dataPortEthernetSpeedStatusTrap NOTIFICATION-TYPE OBJECTS { dataPortEthernetSpeedStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Data Port Ethernet Speed Status attribute indicates if the Ethernet Speed of the Data Port is below that of its neighbor." ::= { ptpTrapPrefix 37 } managementPortEthernetSpeedStatusTrap NOTIFICATION-TYPE OBJECTS { managementPortEthernetSpeedStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, the Management Port Ethernet Speed Status attribute indicates if the Ethernet Speed of the Management Port is below that of its neighbor." ::= { ptpTrapPrefix 38 } protectionInterfaceStatusTrap NOTIFICATION-TYPE OBJECTS { protectionInterfaceStatus } STATUS current DESCRIPTION "In a 1+1 Hot Standby configuration, information is shared between neighbor CMUs over the Protection Interface. The Protection Interface Status attribute reports whether the neighbor CMU is successfully responding, physically disconnected or whether it is physically connected but not responding, e.g. powered down." ::= { ptpTrapPrefix 39 } syslogStateTrap NOTIFICATION-TYPE OBJECTS { syslogState } STATUS current DESCRIPTION "The syslog service has been enabled or disabled" ::= { ptpTrapPrefix 40 } syslogLocalNearlyFullTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "The syslog local log is nearly full (90%)" ::= { ptpTrapPrefix 41 } syslogLocalWrappedTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "The syslog local log has wrapped" ::= { ptpTrapPrefix 42 } secureModeAlarmTrap NOTIFICATION-TYPE OBJECTS { secureModeAlarm } STATUS current DESCRIPTION "The secure mode (e.g. FIPS, UC-APL) state of the unit. The secure mode is not configured(1) state indicates that the unit is capable of secure mode operation, and one or more of the following security materials has not been configured: Key Of Keys, Private Key, Public Certificate, DRNG Entropy Status, Wireless Encryption Key. The secure mode mode is configured but not active(2) state indicates that the unit is capable of secure mode operation, and the security material has been configured, but the configuration of interfaces is not consistent with secure mode operation. The secure mode is not supported(3) state indicates that the unit is not capable of secure mode operation. The secure mode capability requires appropriate hardware compatibility, license key and software image." ::= { ptpTrapPrefix 43 } endWirelessReceiveSignalStatusTrap NOTIFICATION-TYPE OBJECTS { endWirelessReceiveSignalStatus } STATUS current DESCRIPTION "The End Wireless Receive Signal Status indicates if the end of a link is unable to demodulate the signal transmitted from the remote end of the link. When Protection is set to 1+1 Hot Standby, this attribute will indicate Not Detected if the Active CMU is unable to demodulate the wireless signal. When Receive Diversity is enabled, this attribute will indicate Not Detected if both the Active and Inactive CMUs are unable to demodulate the wireless signal." ::= { ptpTrapPrefix 44 } rxDiversityDataPortStatusTrap NOTIFICATION-TYPE OBJECTS { rxDiversityDataPortStatus } STATUS current DESCRIPTION "When Receive Diversity is enabled, the Inactive CMU sends Rx Diversity Ethernet Frames to the Active CMU. Before sending these frames, the Data Port MUST be negotiated at 1000 Mbps. This attribute indicates if this is not the case" ::= { ptpTrapPrefix 45 } rxDiversityAvailabilityStatusTrap NOTIFICATION-TYPE OBJECTS { rxDiversityAvailabilityStatus } STATUS current DESCRIPTION "The Rx Diversity Availability Status attribute will indicate when Receive Diversity is not operating correctly, either due to a fault or due to an incorrect configuration" ::= { ptpTrapPrefix 46 } rxDiversityConfigurationStatusTrap NOTIFICATION-TYPE OBJECTS { rxDiversityConfigurationStatus } STATUS current DESCRIPTION "For Receive Diversity to operate correctly, certain attributes must be configured correctly on both neighbor CMUs. The Rx Diversity Configuration Status attribute will indicate when this is not the case" ::= { ptpTrapPrefix 47 } rFUPowerButtonPressedTrap NOTIFICATION-TYPE OBJECTS { rFUPowerButtonPressed } STATUS current DESCRIPTION "IRFU power button have been pressed, IFRU has powered down unexpectedly" ::= { ptpTrapPrefix 48 } syslogClientTrap NOTIFICATION-TYPE OBJECTS { syslogClient } STATUS current DESCRIPTION "Enable or disable the syslog client" ::= { ptpTrapPrefix 49 } END