--=============================================================== -- File Name : BroadworksMaintenance.mib -- Date : 08/15/2002 -- Author : BroadSoft Inc. --=============================================================== BroadworksMaintenance DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF enterprises, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Gauge32, Counter32, Integer32, Unsigned32 FROM SNMPv2-SMI; broadsoft MODULE-IDENTITY LAST-UPDATED "200508161000Z" ORGANIZATION "Broadsoft, Inc" CONTACT-INFO "Broadsoft, Inc 220 Perry Parkway Gaithersburg, MD 20877 301-977-9440" DESCRIPTION "This is the System Management Information structure for the Broadsoft enterprise." REVISION "200606090930Z" DESCRIPTION "Modified patching tables." REVISION "200603231935Z" DESCRIPTION "Added alarm thresholds." REVISION "200508161000Z" DESCRIPTION "Added MIB conformance section." REVISION "200009191431Z" DESCRIPTION "" ::= { enterprises 6431 } broadworks OBJECT IDENTIFIER ::= { broadsoft 1 } common OBJECT IDENTIFIER ::= { broadworks 1 } managedObjects OBJECT IDENTIFIER ::= { common 2 } thresholds OBJECT IDENTIFIER ::= { common 3 } reservedModule OBJECT IDENTIFIER ::= { common 10 } bwMtcMibConformance OBJECT IDENTIFIER ::= { common 20 } moServerModule OBJECT IDENTIFIER ::= { managedObjects 1 } moSoftwareVersionModule OBJECT IDENTIFIER ::= { managedObjects 2 } moDeviceModule OBJECT IDENTIFIER ::= { managedObjects 3 } thCounterModule OBJECT IDENTIFIER ::= { thresholds 1 } thGaugeModule OBJECT IDENTIFIER ::= { thresholds 2 } thAlarmModule OBJECT IDENTIFIER ::= { thresholds 3 } -- moServerModule modules ........................................... bwServerType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the broadworks server type: { Application Server | Network Server | Media Server | Relay Server }" ::= { moServerModule 1 } bwRedundancyType OBJECT-TYPE SYNTAX INTEGER { nonRedundant(0), primary(1), seconday(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the broadworks server redundancy type: { Primary | Secondary | NotRedundant }" ::= { moServerModule 2 } bwActiveSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Gives the version of the active software version. An operator can change the active software version by setting this field." ::= { moServerModule 3 } bwAdminState OBJECT-TYPE SYNTAX INTEGER { lock(0), locking(1), unlock(2), shuttingDown(3), stopped(4), forceLock(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Server admin state. 0- Lock, 1- Locking, 2- Unlock, 3- ShuttingDown, 4- Stopped, 5- Forced Lock" ::= { moServerModule 4 } bwOperationalState OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Server operational state. 0- Enabled, 1- Disabled" ::= { moServerModule 5 } bwResetServer OBJECT-TYPE SYNTAX INTEGER { set(0), reset(1), hardReset(2), revertReset(3), hardRevertReset(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Remotely reset the BroadWorks server. The reset action kicks in when the counter is set to 1." ::= { moServerModule 6 } bwSubComponentTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSubComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table exposes some key BroadWorks server sub components. It may or may not be empty depending on the server" ::= { moServerModule 7 } bwTargetSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Gives the target software version. If the server is reset, the active server software version will be updated." ::= { moServerModule 8 } bwRevertBackupLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Gives the location of the backup file to use if using the revert option of the reset command." ::= { moServerModule 9 } -- sub components table ........................................... bwSubComponentEntry OBJECT-TYPE SYNTAX BwSubComponentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information about a software component in the system" INDEX { bwSubComponentIndex } ::= { bwSubComponentTable 1 } BwSubComponentEntry ::= SEQUENCE { bwSubComponentIndex Unsigned32, bwSubComponentName DisplayString, bwSubComponentInfo DisplayString } bwSubComponentIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the a software component index in the system" ::= { bwSubComponentEntry 1 } bwSubComponentName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of an exposed subcomponent" ::= { bwSubComponentEntry 2 } bwSubComponentInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays status information about the component" ::= { bwSubComponentEntry 3 } -- moSoftwareVersionModule modules ........................................... bwUpdateSoftwareVersionTable OBJECT-TYPE SYNTAX INTEGER { idle(0), reload(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This counter is used to reload the installed software table. To do so, just set this register to 1 (reload)" ::= { moSoftwareVersionModule 1 } bwSoftwareVersionTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSoftwareVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has an entry per software version installed on the server" ::= { moSoftwareVersionModule 2 } bwSoftwarePatchTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSoftwarePatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has an entry per service packs installed for each sofware versions" ::= { moSoftwareVersionModule 3 } bwSoftwareThirdPartyTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSoftwareThirdPartyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has an entry for third party software version used by the BroadWorks server" ::= { moSoftwareVersionModule 4 } bwSoftwarePatchHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSoftwarePatchHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about all operation performed on patches." ::= { moSoftwareVersionModule 5 } bwSoftwarePatchImpactedFileTable OBJECT-TYPE SYNTAX SEQUENCE OF BwSoftwarePatchImpactedFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about files modified by the patches applied on the system." ::= { moSoftwareVersionModule 6 } -- Installed software versions table ........................................... bwSoftwareVersionEntry OBJECT-TYPE SYNTAX BwSoftwareVersionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular braodworks software version installed on the server" INDEX { bwSoftwareVersionIndex } ::= { bwSoftwareVersionTable 1 } BwSoftwareVersionEntry ::= SEQUENCE { bwSoftwareVersionIndex Unsigned32, bwSoftwareVersionName DisplayString, bwSoftwareVersionInstallDate DisplayString, bwSoftwareVersionStatus INTEGER } bwSoftwareVersionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the a group index in the system" ::= { bwSoftwareVersionEntry 1 } bwSoftwareVersionName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a software load installed on the server." ::= { bwSoftwareVersionEntry 2 } bwSoftwareVersionInstallDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Installation date for this software version." ::= { bwSoftwareVersionEntry 3 } bwSoftwareVersionStatus OBJECT-TYPE SYNTAX INTEGER { installed(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a software version." ::= { bwSoftwareVersionEntry 4 } -- Patches table ........................................... bwSoftwarePatchEntry OBJECT-TYPE SYNTAX BwSoftwarePatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular braodworks patch installed on the server" INDEX { bwSoftwarePatchIndex } ::= { bwSoftwarePatchTable 1 } BwSoftwarePatchEntry ::= SEQUENCE { bwSoftwarePatchIndex Unsigned32, bwSoftwarePatchName DisplayString, bwSoftwarePatchInstallDate DisplayString, bwSoftwarePatchState INTEGER, bwSoftwarePatchBundle DisplayString } bwSoftwarePatchIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer an index of a patch installed in the system" ::= { bwSoftwarePatchEntry 1 } bwSoftwarePatchVersionName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The name of a software load for which this patch applies. This field was obsoleted in BroadWorks release 14.0." ::= { bwSoftwarePatchEntry 2 } bwSoftwarePatchName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Patch name." ::= { bwSoftwarePatchEntry 3 } bwSoftwarePatchType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Patch type. This field was obsoleted in BroadWorks release 14.0." ::= { bwSoftwarePatchEntry 4 } bwSoftwarePatchInstallDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This field was obsoleted in BroadWorks release 14.0." ::= { bwSoftwarePatchEntry 5 } bwSoftwarePatchState OBJECT-TYPE SYNTAX INTEGER { installed(0), active(1), installedPendingActive(2), activePendingInstalled(3), deleted(4), installedMissingDependencies(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the patch." ::= { bwSoftwarePatchEntry 6 } bwSoftwarePatchOperation OBJECT-TYPE SYNTAX INTEGER { none(0), apply(1), remove(2), delete(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This field was obsoleted in BroadWorks release 14.0." ::= { bwSoftwarePatchEntry 7 } bwSoftwarePatchBundle OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Patch Bundle name of the patch." ::= { bwSoftwarePatchEntry 8 } -- Installed 3rd party software versions table ........................................... bwSoftwareThirdPartyEntry OBJECT-TYPE SYNTAX BwSoftwareThirdPartyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on an installed 3rd party software version" INDEX { bwSoftwareThirdPartyIndex } ::= { bwSoftwareThirdPartyTable 1 } BwSoftwareThirdPartyEntry ::= SEQUENCE { bwSoftwareThirdPartyIndex Unsigned32, bwSoftwareThirdPartyName DisplayString, bwSoftwareThirdPartyVersion DisplayString, bwSoftwareThirdPartyStatus INTEGER } bwSoftwareThirdPartyIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the a group index in the system" ::= { bwSoftwareThirdPartyEntry 1 } bwSoftwareThirdPartyName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a software load for which this service pack applies" ::= { bwSoftwareThirdPartyEntry 2 } bwSoftwareThirdPartyVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A 3rd party software version id" ::= { bwSoftwareThirdPartyEntry 3 } bwSoftwareThirdPartyStatus OBJECT-TYPE SYNTAX INTEGER { installed(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a 3rd party software version." ::= { bwSoftwareThirdPartyEntry 4 } -- Patches History table ........................................... bwSoftwarePatchHistoryEntry OBJECT-TYPE SYNTAX BwSoftwarePatchHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the patch history table containing history of operations applied to patches." INDEX { bwSoftwarePatchIndex } ::= { bwSoftwarePatchHistoryTable 1 } BwSoftwarePatchHistoryEntry ::= SEQUENCE { bwSoftwarePatchHistoryIndex Unsigned32, bwSoftwarePatchHistPatchName DisplayString, bwSoftwarePatchHistTimeStamp DisplayString, bwSoftwarePatchHistNewState INTEGER } bwSoftwarePatchHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer an index of a patch operation history." ::= { bwSoftwarePatchHistoryEntry 1 } bwSoftwarePatchHistPatchName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the patch against which the operation was applied." ::= { bwSoftwarePatchHistoryEntry 2 } bwSoftwarePatchHistTimeStamp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the patch operation." ::= { bwSoftwarePatchHistoryEntry 3 } bwSoftwarePatchHistNewState OBJECT-TYPE SYNTAX INTEGER { installed(0), active(1), installedPendingActive(2), activePendingInstalled(3), deleted(4), installedMissingDependencies(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The new state of the patch." ::= { bwSoftwarePatchHistoryEntry 4 } -- Patches Impacted Files table ........................................... bwSoftwarePatchImpactedFileEntry OBJECT-TYPE SYNTAX BwSoftwarePatchImpactedFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the patch impacted file table containing information about files modified by patches." INDEX { bwSoftwarePatchIndex } ::= { bwSoftwarePatchImpactedFileTable 1 } BwSoftwarePatchImpactedFileEntry ::= SEQUENCE { bwSoftwarePatchImpactedFileIndex Unsigned32, bwSoftwarePatchImpactedFilePatchName DisplayString, bwSoftwarePatchImpactedFileFileName DisplayString } bwSoftwarePatchImpactedFileIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer an index of an impacted file/patch name." ::= { bwSoftwarePatchImpactedFileEntry 1 } bwSoftwarePatchImpactedFilePatchName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the patch." ::= { bwSoftwarePatchImpactedFileEntry 2 } bwSoftwarePatchImpactedFileFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of an impacted file." ::= { bwSoftwarePatchImpactedFileEntry 3 } -- moDeviceModule modules ........................................... bwManagedObjectsTable OBJECT-TYPE SYNTAX SEQUENCE OF BwManagedObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all sub-managed objects under BroadWorks control" ::= { moDeviceModule 1 } bwManagedObjectsEntry OBJECT-TYPE SYNTAX BwManagedObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular sub-managed object" INDEX { bwManagedObjectsIndex } ::= { bwManagedObjectsTable 1 } BwManagedObjectsEntry ::= SEQUENCE { bwManagedObjectsIndex Unsigned32, bwManagedObjectsName DisplayString, bwManagedObjectsProtocol DisplayString, bwManagedObjectsType DisplayString, bwManagedObjectsAdminState INTEGER, bwManagedObjectsOperationalState INTEGER } bwManagedObjectsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the a managed object index in the system" ::= { bwManagedObjectsEntry 1 } bwManagedObjectsName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a managed object controlled by BroadWorks" ::= { bwManagedObjectsEntry 2 } bwManagedObjectsProtocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol supported by a managed object controlled by BroadWorks" ::= { bwManagedObjectsEntry 3 } bwManagedObjectsType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of a managed object controlled by BroadWorks" ::= { bwManagedObjectsEntry 4 } bwManagedObjectsAdminState OBJECT-TYPE SYNTAX INTEGER { lock(0), locking(1), unlock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of a managed object controlled by BroadWorks. 0- Lock, 1- locking, 2- Unlock" ::= { bwManagedObjectsEntry 5 } bwManagedObjectsOperationalState OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of a managed object controlled by BroadWorks. 0- Enabled, 1- Disabled" ::= { bwManagedObjectsEntry 6 } -- Counter thresholds modules ........................................... bwCounterThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF BwCounterThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all the thresholds set against counters in the system" ::= { thCounterModule 1 } bwCounterThresholdEntry OBJECT-TYPE SYNTAX BwCounterThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular counter threshold" INDEX { bwCounterThresholdIndex } ::= { bwCounterThresholdTable 1 } BwCounterThresholdEntry ::= SEQUENCE { bwCounterThresholdIndex Unsigned32, bwCounterThresholdDescription DisplayString, bwCounterThresholdName DisplayString, bwCounterThresholdInitialValue Integer32, bwCounterThresholdOffsetValue Integer32, bwCounterThresholdCurrentValue Gauge32, bwCounterThresholdSeverity INTEGER, bwCounterThresholdControl INTEGER } bwCounterThresholdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the index of a counter threshold in the system" ::= { bwCounterThresholdEntry 1 } bwCounterThresholdDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A description for this threshold." ::= { bwCounterThresholdEntry 2 } bwCounterThresholdName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of a counter." ::= { bwCounterThresholdEntry 3 } bwCounterThresholdInitialValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The initial counter threshold value" ::= { bwCounterThresholdEntry 4 } bwCounterThresholdOffsetValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The offset to be added to the current threshold value once an alarm has been sent" ::= { bwCounterThresholdEntry 5 } bwCounterThresholdCurrentValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold value at which the next alarm will be generated" ::= { bwCounterThresholdEntry 6 } bwCounterThresholdSeverity OBJECT-TYPE SYNTAX INTEGER { informational ( 0 ) , low ( 1 ) , medium ( 2 ) , high ( 3 ) , critical ( 4 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of the alarm to be sent" ::= { bwCounterThresholdEntry 7 } bwCounterThresholdControl OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1), delete(2), create(3), invalid(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar controls the life cycle of the threshold. Setting this counter to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this counter to delete(2) removes the entry." ::= { bwCounterThresholdEntry 8 } -- Gauge thresholds modules ........................................... bwGaugeThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF BwGaugeThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all the thresholds set against gauges in the system" ::= { thGaugeModule 1 } bwGaugeThresholdEntry OBJECT-TYPE SYNTAX BwGaugeThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular gauge threshold" INDEX { bwGaugeThresholdIndex } ::= { bwGaugeThresholdTable 1 } BwGaugeThresholdEntry ::= SEQUENCE { bwGaugeThresholdIndex Unsigned32, bwGaugeThresholdDescription DisplayString, bwGaugeThresholdName DisplayString, bwGaugeThresholdNotifyLow Integer32, bwGaugeThresholdNotifyHigh Integer32, bwGaugeThresholdSeverity INTEGER, bwGaugeThresholdControl INTEGER } bwGaugeThresholdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the index of a gauge threshold in the system" ::= { bwGaugeThresholdEntry 1 } bwGaugeThresholdDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A description for this threshold." ::= { bwGaugeThresholdEntry 2 } bwGaugeThresholdName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of a gauge." ::= { bwGaugeThresholdEntry 3 } bwGaugeThresholdNotifyLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyHigh level in a rising direction. Subsequent similar crossings of the NotifyHigh level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyLow level." ::= { bwGaugeThresholdEntry 4 } bwGaugeThresholdNotifyHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyLow level in a falling direction. Subsequent similar crossings of the NotifyLow level will not generate an alarm until the gauge has reached or crossed the corresponding NotifyHigh level." ::= { bwGaugeThresholdEntry 5 } bwGaugeThresholdSeverity OBJECT-TYPE SYNTAX INTEGER { informational ( 0 ) , low ( 1 ) , medium ( 2 ) , high ( 3 ) , critical ( 4 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of the alarm to be sent" ::= { bwGaugeThresholdEntry 6 } bwGaugeThresholdControl OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1), delete(2), create(3), invalid(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar controls the life cycle of the threshold. Setting this gauge to delete(2) removes the entry." ::= { bwGaugeThresholdEntry 7 } -- Alarm thresholds modules ........................................... bwAlarmThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF BwAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of all the thresholds set against alarms in the system" ::= { thAlarmModule 1 } bwAlarmThresholdEntry OBJECT-TYPE SYNTAX BwAlarmThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This row contains information on a particular alarm threshold" INDEX { bwAlarmThresholdIndex } ::= { bwAlarmThresholdTable 1 } BwAlarmThresholdEntry ::= SEQUENCE { bwAlarmThresholdIndex Unsigned32, bwAlarmThresholdName DisplayString, bwAlarmThresholdMaxNumTrapsPerTimePeriod Integer32, bwAlarmThresholdTimePeriodInSeconds Integer32, bwAlarmThresholdProblemTextVarNum1 Integer32, bwAlarmThresholdProblemTextVarNum2 Integer32, bwAlarmThresholdProblemTextVarNum3 Integer32, bwAlarmThresholdProblemTextVarNum4 Integer32, bwAlarmThresholdProblemTextVarNum5 Integer32, bwAlarmThresholdMinimumSeverity INTEGER, bwAlarmThresholdControl INTEGER } bwAlarmThresholdIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This integer represents the index of an alarm threshold in the system" ::= { bwAlarmThresholdEntry 1 } bwAlarmThresholdName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of an alarm or DEFAULT if the threshold applies to all alarms in the system" ::= { bwAlarmThresholdEntry 2 } bwAlarmThresholdMaxNumTrapsPerTimePeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of traps that the system outputs per sliding time period. If set to 0 (zero), the alarm is suppressed and the system does not output any trap for this alarm filter." ::= { bwAlarmThresholdEntry 3 } bwAlarmThresholdTimePeriodInSeconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time period used for threshold calculation, in seconds." ::= { bwAlarmThresholdEntry 4 } bwAlarmThresholdProblemTextVarNum1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero)." ::= { bwAlarmThresholdEntry 5 } bwAlarmThresholdProblemTextVarNum2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero)." ::= { bwAlarmThresholdEntry 6 } bwAlarmThresholdProblemTextVarNum3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero)." ::= { bwAlarmThresholdEntry 7 } bwAlarmThresholdProblemTextVarNum4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero)." ::= { bwAlarmThresholdEntry 8 } bwAlarmThresholdProblemTextVarNum5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name, define the actual threshold. For example, if the alarm has five problem text variables: 1-deviceName, 2-deviceAddress, 3-devicePort, 4-errorType, 5-errorCode, and if the alarm threshold is to limit the number of traps for a given deviceName, devicePort, and errorType, then bwAlarmThresholdProblemTextVarNum1 should be set to 1, bwAlarmThresholdProblemTextVarNum2 should be set to 3, and bwAlarmThresholdProblemTextVarNum3 should be set to 4. To ignore filtering based on problem text variables, set to 0 (zero)." ::= { bwAlarmThresholdEntry 9 } bwAlarmThresholdMinimumSeverity OBJECT-TYPE SYNTAX INTEGER { informational ( 0 ) , low ( 1 ) , medium ( 2 ) , high ( 3 ) , critical ( 4 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the minimum alarm severity under which alarms start to be discarded." ::= { bwAlarmThresholdEntry 10 } bwAlarmThresholdControl OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1), delete(2), create(3), invalid(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar controls the life cycle of the threshold. Setting this threshold to create(3) using an unused index creates a row with the specified index. Setting it with an already used index has no effect. Setting this threshold to delete(2) removes the entry." ::= { bwAlarmThresholdEntry 11 } -- reserved modules ........................................... bwReservedScalar OBJECT-TYPE SYNTAX INTEGER { notUsed ( 0 ) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is a reserved counter" ::= { reservedModule 1 } -- BroadWorks Common managed object MIB Conformance Definition ........................................... bwMtcMibGroups OBJECT IDENTIFIER ::= { bwMtcMibConformance 1 } bwMtcMibCompliancy OBJECT IDENTIFIER ::= { bwMtcMibConformance 2 } -- units of conformance bwMoServerGroup OBJECT-GROUP OBJECTS { bwServerType, bwRedundancyType, bwActiveSoftwareVersion, bwAdminState, bwOperationalState, bwResetServer, bwSubComponentTable, bwTargetSoftwareVersion, bwSubComponentIndex, bwSubComponentName, bwSubComponentInfo } STATUS current DESCRIPTION "This group defines managed object server attributes." ::= { bwMtcMibGroups 1 } bwMoSoftwareVersionsGroup OBJECT-GROUP OBJECTS { bwUpdateSoftwareVersionTable, bwSoftwareVersionTable, bwSoftwarePatchTable, bwSoftwareThirdPartyTable, bwSoftwareVersionIndex, bwSoftwareVersionName, bwSoftwareVersionInstallDate, bwSoftwareVersionStatus, bwSoftwarePatchIndex, bwSoftwarePatchName, bwSoftwarePatchInstallDate, bwSoftwarePatchState, bwSoftwarePatchBundle, bwSoftwareThirdPartyIndex, bwSoftwareThirdPartyName, bwSoftwareThirdPartyVersion, bwSoftwareThirdPartyStatus, bwSoftwarePatchHistoryTable, bwSoftwarePatchHistoryIndex, bwSoftwarePatchHistPatchName,bwSoftwarePatchHistTimeStamp, bwSoftwarePatchHistNewState, bwSoftwarePatchImpactedFileTable, bwSoftwarePatchImpactedFileIndex, bwSoftwarePatchImpactedFilePatchName, bwSoftwarePatchImpactedFileFileName } STATUS current DESCRIPTION "This group defines the software version attributes for the managed object." ::= { bwMtcMibGroups 2 } bwMoDeviceGroup OBJECT-GROUP OBJECTS { bwManagedObjectsTable, bwManagedObjectsIndex, bwManagedObjectsName, bwManagedObjectsProtocol, bwManagedObjectsType, bwManagedObjectsAdminState, bwManagedObjectsOperationalState } STATUS current DESCRIPTION "This group defines the counters used to manage the access or network devices monitored by this managed object." ::= { bwMtcMibGroups 3 } bwMoThresholdsGroup OBJECT-GROUP OBJECTS { bwCounterThresholdTable, bwCounterThresholdIndex, bwCounterThresholdDescription, bwCounterThresholdName, bwCounterThresholdInitialValue, bwCounterThresholdOffsetValue, bwCounterThresholdCurrentValue, bwCounterThresholdSeverity, bwCounterThresholdControl, bwGaugeThresholdTable, bwGaugeThresholdIndex, bwGaugeThresholdDescription, bwGaugeThresholdName, bwGaugeThresholdNotifyLow, bwGaugeThresholdNotifyHigh, bwGaugeThresholdSeverity, bwGaugeThresholdControl, bwAlarmThresholdTable, bwAlarmThresholdIndex, bwAlarmThresholdName, bwAlarmThresholdMaxNumTrapsPerTimePeriod, bwAlarmThresholdTimePeriodInSeconds, bwAlarmThresholdProblemTextVarNum1, bwAlarmThresholdProblemTextVarNum2, bwAlarmThresholdProblemTextVarNum3, bwAlarmThresholdProblemTextVarNum4, bwAlarmThresholdProblemTextVarNum5, bwAlarmThresholdMinimumSeverity, bwAlarmThresholdControl } STATUS current DESCRIPTION "This group defines the threshold control for this managed object." ::= { bwMtcMibGroups 4 } bwMoReserveGroup OBJECT-GROUP OBJECTS { bwReservedScalar } STATUS current DESCRIPTION "MIB reserved section." ::= { bwMtcMibGroups 10 } -- bwMoBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "BroadWorks Common managed object MIB compliance" MODULE -- this module MANDATORY-GROUPS { bwMoServerGroup, bwMoSoftwareVersionsGroup, bwMoDeviceGroup, bwMoThresholdsGroup, bwMoReserveGroup } ::= { bwMtcMibCompliancy 1 } END