-- COPYRIGHT NOTICE -- Copyright (c) Hewlett Packard Company, 2003 -- All rights reserved -- -- -- BLADETYPE2-SWITCH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI IpAddress FROM SNMPv2-SMI DisplayString, PhysAddress, MacAddress FROM SNMPv2-TC BridgeId FROM BRIDGE-MIB hpSwitchBladeType2-Mgmt FROM HP-SWITCH-PL-MIB; agent MODULE-IDENTITY LAST-UPDATED "200312050000Z" -- 5 December 2003 ORGANIZATION "Hewlett Packard Company " CONTACT-INFO "customerservice@hp.com" DESCRIPTION "The MIB module for the general switch configuration and information ." ::= { hpSwitchBladeType2-Mgmt 1 } -- MIB_INSERT_START -- ---------------------------------------------------------------------------- -- { INSERT: bt2Switch -- ---------------------------------------------------------------------------- agentConfig OBJECT IDENTIFIER ::= { agent 1 } agentStats OBJECT IDENTIFIER ::= { agent 2 } agentInfo OBJECT IDENTIFIER ::= { agent 3 } agentOper OBJECT IDENTIFIER ::= { agent 4 } agSystem OBJECT IDENTIFIER ::= { agentConfig 1 } agPortConfig OBJECT IDENTIFIER ::= { agentConfig 2 } agRadiusConfig OBJECT IDENTIFIER ::= { agentConfig 3 } agNTP OBJECT IDENTIFIER ::= { agentConfig 4 } agSyslog OBJECT IDENTIFIER ::= { agentConfig 5 } agTrapHost OBJECT IDENTIFIER ::= { agentConfig 6 } agTftp OBJECT IDENTIFIER ::= { agentConfig 7 } agApply OBJECT IDENTIFIER ::= { agentConfig 8 } agTacacsConfig OBJECT IDENTIFIER ::= { agentConfig 10 } agMgmtNetConfig OBJECT IDENTIFIER ::= { agentConfig 11 } agAccess OBJECT IDENTIFIER ::= { agentConfig 12 } pktStats OBJECT IDENTIFIER ::= { agentStats 1 } mpCpuStats OBJECT IDENTIFIER ::= { agentStats 2 } portStats OBJECT IDENTIFIER ::= { agentStats 3 } spStats OBJECT IDENTIFIER ::= { agentStats 4 } mgmtStats OBJECT IDENTIFIER ::= { agentStats 5 } ntpStats OBJECT IDENTIFIER ::= { agentStats 9 } aclPortStats OBJECT IDENTIFIER ::= { agentStats 10 } aclMeterPortStats OBJECT IDENTIFIER ::= { agentStats 11 } hardware OBJECT IDENTIFIER ::= { agentInfo 1 } portInfo OBJECT IDENTIFIER ::= { agentInfo 2 } swKeyInfo OBJECT IDENTIFIER ::= { agentInfo 3 } agDiff OBJECT IDENTIFIER ::= { agentInfo 4 } agCfgDump OBJECT IDENTIFIER ::= { agentInfo 5 } mgmtInfo OBJECT IDENTIFIER ::= { agentInfo 6 } geaportInfo OBJECT IDENTIFIER ::= { agentInfo 7 } ufdInfo OBJECT IDENTIFIER ::= { agentInfo 8 } agNTPOper OBJECT IDENTIFIER ::= { agentOper 2 } -- There are two configuration blocks for Bladetype2 switches. -- The "current_config" reflects the configuration parameters that the -- switch is operating on and it is read-only. The objects with "CurCfg" -- in the name are reflect to this configuration block. -- -- The "new_config" accepts user configurations on set. The objects with -- "NewCfg" in the name are reflect to this configuration block. -- -- The newly set configurations will not take effect until a "apply" -- command has been issued (See agApplyConfiguration object defined in -- BLADETYPE2-SWITCH-MIB). -- -- The newly set configurations will not be saved through next restarting -- of the switch unless a "save" command has been issued (See -- agSaveConfiguration object defined in BLADETYPE2-SWITCH-MIB). -- Hardware Information hwPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware part number of the Bladetype2 Switch." ::= { hardware 1 } hwRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware revision. If the revision is not available, a zero length string should be returned." ::= { hardware 2 } hwPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), bad(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the internal power supply." ::= { hardware 3 } hwSensor1Temp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature of the rear left sensor in degrees Celsius." ::= { hardware 4 } hwInsertedCubeType OBJECT-TYPE SYNTAX INTEGER { fiberCube(1), copperCube(2), none(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The inserted cube type." ::= { hardware 5 } -- Port operation table agPortOperTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortOperTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port operations." ::= { agentOper 1 } agPortOperTableEntry OBJECT-TYPE SYNTAX AgPortOperTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port operations table." INDEX { portOperIdx } ::= { agPortOperTable 1 } AgPortOperTableEntry ::= SEQUENCE { portOperIdx Integer32, portOperState INTEGER, portOperRmon INTEGER } portOperIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { agPortOperTableEntry 1 } portOperState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable port." ::= { agPortOperTableEntry 2 } portOperRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RMON for port." ::= { agPortOperTableEntry 3 } --portOperDot1x OBJECT IDENTIFIER ::= { agPortOperTableEntry 4 } portOperDot1xTable OBJECT-TYPE SYNTAX SEQUENCE OF PortOperDot1xTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port operations." ::= { agPortOperTable 2 } portOperDot1xTableEntry OBJECT-TYPE SYNTAX PortOperDot1xTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port 802.1x operation table." INDEX { portOperDot1xIndx } ::= { portOperDot1xTable 1 } PortOperDot1xTableEntry ::= SEQUENCE { portOperDot1xIndx Integer32, portOperDot1xReset INTEGER, portOperDot1xReauth INTEGER } portOperDot1xIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portOperDot1xTableEntry 1 } portOperDot1xReset OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reinitialize 802.1x access control on port." ::= { portOperDot1xTableEntry 2 } portOperDot1xReauth OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate reauthentication on port." ::= { portOperDot1xTableEntry 3 } -- NTP operation ntpOperSendReq OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to send requests to the NTP server." ::= { agNTPOper 1 } -- Port information table portInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF PortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port information." ::= { portInfo 1 } portInfoTableEntry OBJECT-TYPE SYNTAX PortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port information table." INDEX { portInfoIndx } ::= { portInfoTable 1 } PortInfoTableEntry ::= SEQUENCE { portInfoIndx Integer32, portInfoSpeed INTEGER, portInfoMode INTEGER, portInfoFlowCtrl INTEGER, portInfoLink INTEGER, portInfoPhyIfDescr DisplayString, portInfoPhyIfType INTEGER, portInfoPhyIfMtu Integer32, portInfoPhyIfPhysAddress PhysAddress, portInfoPhyIfOperStatus INTEGER, portInfoPhyIfLastChange TimeTicks } portInfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portInfoTableEntry 1 } portInfoSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), mbs1000(4), any(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational speed of the port." ::= { portInfoTableEntry 2 } portInfoMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational mode of the port." ::= { portInfoTableEntry 3 } portInfoFlowCtrl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational flow control of the port." ::= { portInfoTableEntry 4 } portInfoLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3), inoperative(4) -- unrecognized PCI device } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational link status of the port." ::= { portInfoTableEntry 5 } portInfoPhyIfDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface." ::= { portInfoTableEntry 6 } portInfoPhyIfType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), -- T-1 e1(19), -- european equiv. of T-1 basicISDN(20), primaryISDN(21), -- proprietary serial propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), -- CLNP over IP [11] ethernet-3Mbit(26), nsip(27), -- XNS over IP slip(28), -- generic SLIP ultra(29), -- ULTRA technologies ds3(30), -- T-3 sip(31), -- SMDS frame-relay(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { portInfoTableEntry 7 } portInfoPhyIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { portInfoTableEntry 8 } portInfoPhyIfPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { portInfoTableEntry 9 } portInfoPhyIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { portInfoTableEntry 10 } portInfoPhyIfLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { portInfoTableEntry 11 } -- Agent System Group -- This group of objects take effect on the 'SET' request. -- There is no need to 'apply' or 'save'. agApplyConfiguration OBJECT-TYPE SYNTAX INTEGER { other(1), apply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. " ::= { agSystem 2 } agSavePending OBJECT-TYPE SYNTAX INTEGER { saveNeeded(1), noSaveNeeded(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash." ::= { agSystem 3 } agSaveConfiguration OBJECT-TYPE SYNTAX INTEGER { ok(1), saveActive(2), notSaveActive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read." ::= { agSystem 4 } agRevert OBJECT-TYPE SYNTAX INTEGER { other(1), revert(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. " ::= { agSystem 5 } agRevertApply OBJECT-TYPE SYNTAX INTEGER { other(1), revertApply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. " ::= { agSystem 6 } agReset OBJECT-TYPE SYNTAX INTEGER { other(1), coldReset(2), warmReset(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)..." ::= { agSystem 7 } agConfigForNxtReset OBJECT-TYPE SYNTAX INTEGER { active(2), backup(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block" ::= { agSystem 8 } agImageForNxtReset OBJECT-TYPE SYNTAX INTEGER { image1(2), image2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2" ::= { agSystem 9 } agSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available." ::= { agSystem 10 } agBootVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available." ::= { agSystem 11 } agImage1Ver OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image." ::= { agSystem 12 } agImage2Ver OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image." ::= { agSystem 13 } agRtcDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available." ::= { agSystem 14 } agRtcTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available." ::= { agSystem 15 } agLastSetErrorReason OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The error reason of the last SET failure." ::= { agSystem 16 } agCurCfgHttpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the HTTP server is listening to in the current_configuration block." ::= { agSystem 17 } agNewCfgHttpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the HTTP server is listening to in the new_configuration block." ::= { agSystem 18 } agCurCfgLoginBanner OBJECT-TYPE SYNTAX DisplayString (SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined login banner." ::= { agSystem 19 } agNewCfgLoginBanner OBJECT-TYPE SYNTAX DisplayString (SIZE(0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined login banner." ::= { agSystem 20 } agCurCfgConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable console output of syslog messages." ::= { agSystem 23 } agNewCfgConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable console output of syslog messages." ::= { agSystem 24 } agCurCfgBootp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the use of BootP, as currently configured in the current_configuration block." ::= { agSystem 29 } agNewCfgBootp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the use of BootP, in the new_configuration block." ::= { agSystem 30 } agSlotNumber OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning." ::= { agSystem 31 } agCurCfgSnmpTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) MAX-ACCESS read-only STATUS current DESCRIPTION "Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user." ::= { agSystem 32 } agNewCfgSnmpTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user." ::= { agSystem 33 } agCurCfgTelnetServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the telnet server listens for telnet sessions." ::= { agSystem 34 } agNewCfgTelnetServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the telnet server listens for telnet sessions." ::= { agSystem 35 } agClearFlashDump OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. " ::= { agSystem 36 } agRackId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The rack unique identifier." ::= { agSystem 37 } agChassis OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis serial number." ::= { agSystem 38 } agCurCfgTftpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the TFTP server is listening to in the current_configuration block." ::= { agSystem 39 } agNewCfgTftpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the TFTP server is listening to in the new_configuration block." ::= { agSystem 40 } agCurCfgHttpsServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the HTTPS server is listening to in the current_configuration block." ::= { agSystem 49 } agNewCfgHttpsServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the HTTPS server is listening to in the new_configuration block." ::= { agSystem 50 } agCurDaylightSavings OBJECT-TYPE SYNTAX INTEGER { none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCreekFortSaintJohnBritishColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic (107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CentTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EastSouthBorneoCelebesBaliNusaTengarraWestTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOcean-WallisAndFutuna(420) } MAX-ACCESS read-only STATUS current DESCRIPTION "The daylight savings location." ::= { agSystem 51 } agNewDaylightSavings OBJECT-TYPE SYNTAX INTEGER { none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCreekFortSaintJohnBritishColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic (107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CentTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EastSouthBorneoCelebesBaliNusaTengarraWestTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOceanWallisAndFutuna(420) } MAX-ACCESS read-write STATUS current DESCRIPTION "The daylight savings location." ::= { agSystem 52 } agCurCfgIdleCLITimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Set idle CLI sessions timeout." ::= { agSystem 53 } agNewCfgIdleCLITimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set idle CLI sessions timeout." ::= { agSystem 54 } agCurCfgUfdTrap OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the UFDFO SNMP trap." ::= { agSystem 55 } agNewCfgUfdTrap OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable sending UFDFO SNMP trap." ::= { agSystem 56 } agCurBootNxtCliMode OBJECT-TYPE SYNTAX INTEGER { aoscli(1), iscli(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current boot mode." ::= { agSystem 64 } agNewBootNxtCliMode OBJECT-TYPE SYNTAX INTEGER { aoscli(1), iscli(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Next cli boot mode." ::= { agSystem 65 } agCurCfgReminders OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of reminders feature." ::= { agSystem 70 } agNewCfgReminders OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable reminders feature." ::= { agSystem 71 } -- Syslog Configuration agCurCfgSyslogHost OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 1 } agNewCfgSyslogHost OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The syslog host IP address, in the new_configuration block." ::= { agSyslog 2 } agCurCfgSyslog2Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 3 } agNewCfgSyslog2Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The second syslog host IP address, in the new_configuration block." ::= { agSyslog 4 } agCurCfgSyslogFac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog host in the current_configuration block." ::= { agSyslog 5 } agNewCfgSyslogFac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog host in the new_configuration block." ::= { agSyslog 6 } agCurCfgSyslog2Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog2 host in the current_configuration block." ::= { agSyslog 7 } agNewCfgSyslog2Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslogs host in the new_configuration block." ::= { agSyslog 8 } agCurCfgSyslogSev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog host in the current configuration block." ::= { agSyslog 13 } agNewCfgSyslogSev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog host in the new configuration block." ::= { agSyslog 14 } agCurCfgSyslog2Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog2 host in the current configuration block." ::= { agSyslog 15 } agNewCfgSyslog2Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslogs host in the new configuration block." ::= { agSyslog 16 } agClrSyslogMsgs OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all current Syslog messages." ::= { agSyslog 9 } agSyslogMsgTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the syslog message table." ::= { agSyslog 10 } agSyslogMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSyslogMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of syslog messages." ::= { agSyslog 11 } agSyslogMsgTableEntry OBJECT-TYPE SYNTAX AgSyslogMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A syslog message stored on the switch." INDEX { agSyslogMsgIndex } ::= { agSyslogMsgTable 1 } AgSyslogMsgTableEntry ::= SEQUENCE { agSyslogMsgIndex Integer32, agSyslogMessage DisplayString } agSyslogMsgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog message table index." ::= { agSyslogMsgTableEntry 1 } agSyslogMessage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog message." ::= { agSyslogMsgTableEntry 2 } agLog OBJECT IDENTIFIER ::= { agSyslog 12 } agNewCfgSyslogTrapConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable console syslog and SNMP trap, in the new_configuration block." ::= { agLog 1 } agCurCfgSyslogTrapConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 2 } agNewCfgSyslogTrapSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable system level syslog and SNMP trap, in the new_configuration block." ::= { agLog 3 } agCurCfgSyslogTrapSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 4 } agNewCfgSyslogTrapMgmt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block." ::= { agLog 5 } agCurCfgSyslogTrapMgmt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 6 } agNewCfgSyslogTrapCli OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block." ::= { agLog 7 } agCurCfgSyslogTrapCli OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 8 } agNewCfgSyslogTrapStg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block." ::= { agLog 9 } agCurCfgSyslogTrapStg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 10 } agNewCfgSyslogTrapVlan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VLAN syslog and SNMP trap, in the new_configuration block." ::= { agLog 11 } agCurCfgSyslogTrapVlan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 12 } agNewCfgSyslogTrapSsh OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block." ::= { agLog 19 } agCurCfgSyslogTrapSsh OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 20 } agNewCfgSyslogTrapVrrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VRRP syslog and SNMP trap, in the new_configuration block." ::= { agLog 21 } agCurCfgSyslogTrapVrrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 22 } agNewCfgSyslogTrapNtp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable NTP syslog and SNMP trap, in the new_configuration block." ::= { agLog 25 } agCurCfgSyslogTrapNtp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 26 } agNewCfgSyslogTrapIp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable IP related syslog and SNMP trap, in the new_configuration block." ::= { agLog 31 } agCurCfgSyslogTrapIp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 32 } agNewCfgSyslogTrapWeb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block." ::= { agLog 35 } agCurCfgSyslogTrapWeb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 36 } agNewCfgSyslogTrapOspf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block." ::= { agLog 41 } agCurCfgSyslogTrapOspf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 42 } agNewCfgSyslogTrapRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable rmon related syslog and SNMP trap, in the new_configuration block." ::= { agLog 45 } agCurCfgSyslogTrapRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 46 } agNewCfgSyslogTrapUfd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable UFD related syslog and SNMP trap, in the new_configuration block." ::= { agLog 47 } agCurCfgSyslogTrapUfd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 48 } agNewCfgSyslogTrapCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable CFG related syslog and SNMP trap, in the new_configuration block." ::= { agLog 49 } agCurCfgSyslogTrapCfg OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 50 } agNewCfgSyslogTrap8021x OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block." ::= { agLog 51 } agCurCfgSyslogTrap8021x OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 52 } agNewCfgSyslogTrapHotlinks OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Hot Links related syslog and SNMP trap, in the new_configuration block." ::= { agLog 53 } agCurCfgSyslogTrapHotlinks OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Hot Links related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 54 } -- Trap host table agTrapHostTableMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the trap host table." ::= { agTrapHost 1 } agCurCfgTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trap hosts which to send SNMP traps in the current_configuration block." ::= { agTrapHost 2 } agCurCfgTrapHostEntry OBJECT-TYPE SYNTAX AgCurCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the trap host table in the current_configuration block." INDEX { agCurCfgTrapHostIndx } ::= { agCurCfgTrapHostTable 1 } AgCurCfgTrapHostEntry ::= SEQUENCE { agCurCfgTrapHostIndx Integer32, agCurCfgTrapHostIpAddr IpAddress, agCurCfgTrapHostCommString DisplayString } agCurCfgTrapHostIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in trap host table." ::= { agCurCfgTrapHostEntry 1 } agCurCfgTrapHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a trap host." ::= { agCurCfgTrapHostEntry 2 } agCurCfgTrapHostCommString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP community string to use with the trap host" ::= { agCurCfgTrapHostEntry 3 } agNewCfgTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trap hosts which to send SNMP traps in the new_configuration block." ::= { agTrapHost 3 } agNewCfgTrapHostEntry OBJECT-TYPE SYNTAX AgNewCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the trap host table in the new_configuration block." INDEX { agNewCfgTrapHostIndx } ::= { agNewCfgTrapHostTable 1 } AgNewCfgTrapHostEntry ::= SEQUENCE { agNewCfgTrapHostIndx Integer32, agNewCfgTrapHostIpAddr IpAddress, agNewCfgTrapHostCommString DisplayString } agNewCfgTrapHostIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in trap host table." ::= { agNewCfgTrapHostEntry 1 } agNewCfgTrapHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of a trap host." ::= { agNewCfgTrapHostEntry 2 } agNewCfgTrapHostCommString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP community string to use with the trap host" ::= { agNewCfgTrapHostEntry 3 } -- TFTP Config agTftpServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The TFTP server IP address or domain name." ::= { agTftp 1 } agTftpImage OBJECT-TYPE SYNTAX INTEGER { image1(2), image2(3), boot(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the image file should be loaded in image1 or image2 or boot in flash." ::= { agTftp 2 } agTftpImageFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The image file name to be downloaded." ::= { agTftp 3 } agTftpCfgFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration file name." ::= { agTftp 4 } agTftpDumpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name for core dump." ::= { agTftp 5 } agTftpAction OBJECT-TYPE SYNTAX INTEGER { other(1), img-get(2), cfg-get(3), cfg-put(4), dump-put(5), img-put(7), tsdump-put(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. img-put(7) - Upload specified switch image to a specified image file (agTftpImageFileName) on the TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTftpTSDumpFileName) on the TFTP server. other(1) is returned always when read." ::= { agTftp 6 } agTftpLastActionStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The recorded status of the previous TFTP activity." ::= { agTftp 7 } agTftpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The username for FTP server or blank for TFTP server." ::= { agTftp 9 } agTftpPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password for FTP server." ::= { agTftp 10 } agTftpTSDumpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name for TS dump." ::= { agTftp 11 } -- Agent Port Table agPortTableMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the port configuration host table." ::= { agPortConfig 1 } agPortCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port configuration in the current_configuration block." ::= { agPortConfig 2 } agPortCurCfgTableEntry OBJECT-TYPE SYNTAX AgPortCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port table in the current_configuration block." INDEX { agPortCurCfgIndx } ::= { agPortCurCfgTable 1 } AgPortCurCfgTableEntry ::= SEQUENCE { agPortCurCfgIndx Integer32, agPortCurCfgState INTEGER, agPortCurCfgVlanTag INTEGER, agPortCurCfgStp INTEGER, agPortCurCfgRmon INTEGER, agPortCurCfgPVID INTEGER, agPortCurCfgGigEthAutoNeg INTEGER, agPortCurCfgGigEthSpeed INTEGER, agPortCurCfgGigEthMode INTEGER, agPortCurCfgGigEthFctl INTEGER, agPortCurCfgPortName DisplayString, agPortCurCfgLinkTrap INTEGER, agPortCurCfgTagPVID INTEGER , agPortCurCfgMulticastThreshold INTEGER, agPortCurCfgMulticastThresholdRate INTEGER, agPortCurCfgBroadcastThreshold INTEGER, agPortCurCfgBroadcastThresholdRate INTEGER, agPortCurCfgDLFThreshold INTEGER, agPortCurCfgDLFThresholdRate INTEGER } agPortCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in port configurations table." ::= { agPortCurCfgTableEntry 1 } agPortCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the port." ::= { agPortCurCfgTableEntry 2 } agPortCurCfgVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is VLAN tag state of the port" ::= { agPortCurCfgTableEntry 3 } agPortCurCfgStp OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn Spanning Tree on or off for the port." ::= { agPortCurCfgTableEntry 4 } agPortCurCfgRmon OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn RMON on or off on the port." ::= { agPortCurCfgTableEntry 5 } agPortCurCfgPVID OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The default VLAN ID for the port." ::= { agPortCurCfgTableEntry 6 } agPortCurCfgGigEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 11 } agPortCurCfgGigEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the port speed for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 12 } agPortCurCfgGigEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to select port mode for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 13 } agPortCurCfgGigEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to select port flow control for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 14 } agPortCurCfgPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port name." ::= { agPortCurCfgTableEntry 15 } agPortCurCfgLinkTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { agPortCurCfgTableEntry 18 } agPortCurCfgTagPVID OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is PVID tag state of the port" ::= { agPortCurCfgTableEntry 19 } agPortCurCfgMulticastThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the port's Multicast Threshold." ::= { agPortCurCfgTableEntry 20 } agPortCurCfgMulticastThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-only STATUS current DESCRIPTION "Current port's Multicast Threshold Rate." ::= { agPortCurCfgTableEntry 21 } agPortCurCfgBroadcastThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the port's Broadcast Threshold." ::= { agPortCurCfgTableEntry 22 } agPortCurCfgBroadcastThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-only STATUS current DESCRIPTION "Current port's Broadcast Threshold Rate." ::= { agPortCurCfgTableEntry 23 } agPortCurCfgDLFThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the port's Destination Lookup Fail Threshold." ::= { agPortCurCfgTableEntry 24 } agPortCurCfgDLFThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-only STATUS current DESCRIPTION "Current port's Destination Lookup Fail Threshold Rate." ::= { agPortCurCfgTableEntry 25 } agPortFiberCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortFiberCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of fiber port configuration in the current_configuration block." ::= { agPortCurCfgTable 2 } agPortFiberCurCfgTableEntry OBJECT-TYPE SYNTAX AgPortFiberCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the fiber port table in the current_configuration block." INDEX { agPortFiberCurCfgIndx } ::= { agPortFiberCurCfgTable 1 } AgPortFiberCurCfgTableEntry ::= SEQUENCE { agPortFiberCurCfgIndx Integer32, agPortFiberCurCfgTxCtrl INTEGER, agPortFiberCurCfgTxPulse INTEGER, agPortFiberCurCfgTxUp INTEGER, agPortFiberCurCfgTxDn INTEGER } agPortFiberCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in fiber port current configuration table." ::= { agPortFiberCurCfgTableEntry 1 } agPortFiberCurCfgTxCtrl OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the TX control." ::= { agPortFiberCurCfgTableEntry 2 } agPortFiberCurCfgTxPulse OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the TX pulse." ::= { agPortFiberCurCfgTableEntry 3 } agPortFiberCurCfgTxUp OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Current TX up time." ::= { agPortFiberCurCfgTableEntry 4 } agPortFiberCurCfgTxDn OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Current TX dn time." ::= { agPortFiberCurCfgTableEntry 5 } agPortNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port configuration in the new_configuration block." ::= { agPortConfig 3 } agPortNewCfgTableEntry OBJECT-TYPE SYNTAX AgPortNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port configuration table in the new_configuration block." INDEX { agPortNewCfgIndx } ::= { agPortNewCfgTable 1 } AgPortNewCfgTableEntry ::= SEQUENCE { agPortNewCfgIndx Integer32, agPortNewCfgState INTEGER, agPortNewCfgVlanTag INTEGER, agPortNewCfgStp INTEGER, agPortNewCfgRmon INTEGER, agPortNewCfgPVID INTEGER, agPortNewCfgGigEthAutoNeg INTEGER, agPortNewCfgGigEthSpeed INTEGER, agPortNewCfgGigEthMode INTEGER, agPortNewCfgGigEthFctl INTEGER, agPortNewCfgPortName DisplayString, agPortNewCfgLinkTrap INTEGER, agPortNewCfgTagPVID INTEGER , agPortNewCfgMulticastThreshold INTEGER, agPortNewCfgMulticastThresholdRate INTEGER, agPortNewCfgBroadcastThreshold INTEGER, agPortNewCfgBroadcastThresholdRate INTEGER, agPortNewCfgDLFThreshold INTEGER, agPortNewCfgDLFThresholdRate INTEGER } agPortNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in port configurations table." ::= { agPortNewCfgTableEntry 1 } agPortNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the state of the port." ::= { agPortNewCfgTableEntry 2 } agPortNewCfgVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is VLAN tag state of the port" ::= { agPortNewCfgTableEntry 3 } agPortNewCfgStp OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn Spanning Tree on or off for the port." ::= { agPortNewCfgTableEntry 4 } agPortNewCfgRmon OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn RMON on or off on the port." ::= { agPortNewCfgTableEntry 5 } agPortNewCfgPVID OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The default VLAN ID for the port." ::= { agPortNewCfgTableEntry 6 } agPortNewCfgGigEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 11 } agPortNewCfgGigEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the port speed for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 12 } agPortNewCfgGigEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to select port mode for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 13 } agPortNewCfgGigEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to select port flow control for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 14 } agPortNewCfgPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port name." ::= { agPortNewCfgTableEntry 15 } agPortNewCfgLinkTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { agPortNewCfgTableEntry 18 } agPortNewCfgTagPVID OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is PVID tag state of the port" ::= { agPortNewCfgTableEntry 19 } agPortNewCfgMulticastThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "New status of the port's Multicast Threshold." ::= { agPortNewCfgTableEntry 20 } agPortNewCfgMulticastThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-write STATUS current DESCRIPTION "New port's Multicast Threshold Rate." ::= { agPortNewCfgTableEntry 21 } agPortNewCfgBroadcastThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "New status of the port's Broadcast Threshold." ::= { agPortNewCfgTableEntry 22 } agPortNewCfgBroadcastThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-write STATUS current DESCRIPTION "New port's Broadcast Threshold Rate." ::= { agPortNewCfgTableEntry 23 } agPortNewCfgDLFThreshold OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "New status of the port's Destination Lookup Fail Threshold." ::= { agPortNewCfgTableEntry 24 } agPortNewCfgDLFThresholdRate OBJECT-TYPE SYNTAX INTEGER(0..262143) MAX-ACCESS read-write STATUS current DESCRIPTION "New port's Destination Lookup Fail Threshold Rate." ::= { agPortNewCfgTableEntry 25 } agPortFiberNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortFiberNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of fiber port configuration in the new_configuration block." ::= { agPortNewCfgTable 2 } agPortFiberNewCfgTableEntry OBJECT-TYPE SYNTAX AgPortFiberNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the fiber port table in the new_configuration block." INDEX { agPortFiberNewCfgIndx } ::= { agPortFiberNewCfgTable 1 } AgPortFiberNewCfgTableEntry ::= SEQUENCE { agPortFiberNewCfgIndx Integer32, agPortFiberNewCfgTxCtrl INTEGER, agPortFiberNewCfgTxPulse INTEGER, agPortFiberNewCfgTxUp INTEGER, agPortFiberNewCfgTxDn INTEGER } agPortFiberNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in fiber port new configuration table." ::= { agPortFiberNewCfgTableEntry 1 } agPortFiberNewCfgTxCtrl OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "New TX control." ::= { agPortFiberNewCfgTableEntry 2 } agPortFiberNewCfgTxPulse OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "New TX pulse." ::= { agPortFiberNewCfgTableEntry 3 } agPortFiberNewCfgTxUp OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "New TX up time." ::= { agPortFiberNewCfgTableEntry 4 } agPortFiberNewCfgTxDn OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "New TX dn time." ::= { agPortFiberNewCfgTableEntry 5 } -- RADIUS Configuration radCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Primary RADIUS server." ::= { agRadiusConfig 1 } radNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Primary RADIUS server." ::= { agRadiusConfig 2 } radCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Secondary RADIUS server." ::= { agRadiusConfig 3 } radNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Secondary RADIUS server." ::= { agRadiusConfig 4 } radCurCfgPort OBJECT-TYPE SYNTAX INTEGER (1500..3000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the RADIUS port number." ::= { agRadiusConfig 5 } radNewCfgPort OBJECT-TYPE SYNTAX INTEGER (1500..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "Speicfy the RADIUS port number." ::= { agRadiusConfig 6 } radCurCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to RADIUS server." ::= { agRadiusConfig 7 } radNewCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to RADIUS server." ::= { agRadiusConfig 8 } radCurCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retries to the RADIUS server." ::= { agRadiusConfig 9 } radNewCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries to the RADIUS server." ::= { agRadiusConfig 10 } radCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS authentication." ::= { agRadiusConfig 11 } radNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS authentication." ::= { agRadiusConfig 12 } radCurCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RADIUS authentication string." ::= { agRadiusConfig 13 } radNewCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The RADIUS authentication string." ::= { agRadiusConfig 14 } radCurCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS backdoor for telnet." ::= { agRadiusConfig 15 } radNewCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS backdoor for telnet." ::= { agRadiusConfig 16 } radCurCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The second RADIUS authentication string." ::= { agRadiusConfig 17 } radNewCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second RADIUS authentication string." ::= { agRadiusConfig 18 } radCurCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS secure backdoor for telnet." ::= { agRadiusConfig 19 } radNewCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS secure backdoor for telnet." ::= { agRadiusConfig 20 } -- NTP Configuration agCurCfgNTPServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server Address." ::= { agNTP 1 } agNewCfgNTPServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server Address." ::= { agNTP 2 } agCurCfgNTPResyncInterval OBJECT-TYPE SYNTAX INTEGER (1..44640) MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server resync interval in minutes." ::= { agNTP 3 } agNewCfgNTPResyncInterval OBJECT-TYPE SYNTAX INTEGER (1..44640) MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server resync interval in minutes." ::= { agNTP 4 } agCurCfgNTPTzoneHHMM OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server timezone offset from GMT formatted as (+/-)HH:MM." ::= { agNTP 5 } agNewCfgNTPTzoneHHMM OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59." ::= { agNTP 6 } agCurCfgNTPDlight OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable daylight savings time." ::= { agNTP 7 } agNewCfgNTPDlight OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable daylight savings time." ::= { agNTP 8 } agCurCfgNTPService OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable NTP Service." ::= { agNTP 9 } agNewCfgNTPService OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable NTP Service." ::= { agNTP 10 } agCurCfgNTPSecServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Secondary NTP Server Address." ::= { agNTP 11 } agNewCfgNTPSecServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Secondary NTP Server Address." ::= { agNTP 12 } -- APPLY Configuration agApplyPending OBJECT-TYPE SYNTAX INTEGER { applyNeeded(2), noApplyNeeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above." ::= { agApply 1 } agApplyConfig OBJECT-TYPE SYNTAX INTEGER { apply(1), idle(2), inprogress(3), complete(4), failed(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable." ::= { agApply 2 } agApplyTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the apply table." ::= { agApply 4 } agApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF AgApplyTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of URL path for URL load balancing in the current_config." ::= { agApply 5 } agApplyTableEntry OBJECT-TYPE SYNTAX AgApplyTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an URL path for URL load balancing." INDEX { agApplyIndex } ::= { agApplyTable 1 } AgApplyTableEntry ::= SEQUENCE { agApplyIndex Integer32, agApplyString OCTET STRING } agApplyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agApplyTableEntry 1 } agApplyString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the apply table." ::= { agApplyTableEntry 2 } -- TACACS+ Configuration tacCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Primary TACACS+ server." ::= { agTacacsConfig 1 } tacNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Primary TACACS+ server." ::= { agTacacsConfig 2 } tacCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Secondary TACSACS server." ::= { agTacacsConfig 3 } tacNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Secondary TACACS+ server." ::= { agTacacsConfig 4 } tacCurCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the TACACS+ port number." ::= { agTacacsConfig 5 } tacNewCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the TACACS+ port number." ::= { agTacacsConfig 6 } tacCurCfgTimeout OBJECT-TYPE SYNTAX INTEGER (4..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to TACACS+ server." ::= { agTacacsConfig 7 } tacNewCfgTimeout OBJECT-TYPE SYNTAX INTEGER (4..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to TACACS+ server." ::= { agTacacsConfig 8 } tacCurCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retries to the TACACS+ server." ::= { agTacacsConfig 9 } tacNewCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries to the TACACS+ server." ::= { agTacacsConfig 10 } tacCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ authentication." ::= { agTacacsConfig 11 } tacNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ authentication." ::= { agTacacsConfig 12 } tacCurCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The TACACS+ authentication string." ::= { agTacacsConfig 13 } tacNewCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The TACACS+ authentication string." ::= { agTacacsConfig 14 } tacCurCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ backdoor for telnet." ::= { agTacacsConfig 15 } tacNewCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ backdoor for telnet." ::= { agTacacsConfig 16 } tacCurCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The second TACACS+ authentication string." ::= { agTacacsConfig 17 } tacNewCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second TACACS+ authentication string." ::= { agTacacsConfig 18 } tacCurCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ secure backdoor for telnet." ::= { agTacacsConfig 23 } tacNewCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ secure backdoor for telnet." ::= { agTacacsConfig 24 } tacCurCfgCmap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable Tacacs+ new prividlege level maping." ::= { agTacacsConfig 25 } tacNewCfgCmap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Tacacs+ new prividlege level maping." ::= { agTacacsConfig 26 } agTacacsUserMapCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgTacacsUserMapCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tacacs+ user map current configuration." ::= { agTacacsConfig 31 } agTacacsUserMapCurCfgTableEntry OBJECT-TYPE SYNTAX AgTacacsUserMapCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the tacacs+ user mapping table." INDEX { agTacacsUserMapCurCfgUId } ::= { agTacacsUserMapCurCfgTable 1 } AgTacacsUserMapCurCfgTableEntry ::= SEQUENCE { agTacacsUserMapCurCfgUId Integer32, agTacacsUserMapCurCfgMapping INTEGER } agTacacsUserMapCurCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current config remote privilege identifier." ::= { agTacacsUserMapCurCfgTableEntry 1 } agTacacsUserMapCurCfgMapping OBJECT-TYPE SYNTAX INTEGER { invalid(0), user(1), oper(2), admin(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Tacacs+ user privilege mappings." ::= { agTacacsUserMapCurCfgTableEntry 2 } agTacacsUserMapNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgTacacsUserMapNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tacacs+ user map new configuration." ::= { agTacacsConfig 32 } agTacacsUserMapNewCfgTableEntry OBJECT-TYPE SYNTAX AgTacacsUserMapNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the tacacs+ user mapping table." INDEX { agTacacsUserMapNewCfgUId } ::= { agTacacsUserMapNewCfgTable 1 } AgTacacsUserMapNewCfgTableEntry ::= SEQUENCE { agTacacsUserMapNewCfgUId Integer32, agTacacsUserMapNewCfgMapping INTEGER } agTacacsUserMapNewCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The new config remote privilege identifier." ::= { agTacacsUserMapNewCfgTableEntry 1 } agTacacsUserMapNewCfgMapping OBJECT-TYPE SYNTAX INTEGER { invalid(0), user(1), oper(2), admin(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set new Tacacs+ user privilege mappings." ::= { agTacacsUserMapNewCfgTableEntry 2 } -- Multiple Management network MIB objects agMgmtNetTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Management Network Table." ::= { agMgmtNetConfig 1 } agCurCfgMgmtNetTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the current configuration block." ::= { agMgmtNetConfig 2 } agCurCfgMgmtNetEntry OBJECT-TYPE SYNTAX AgCurCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agCurCfgMgmtNetIndex } ::= { agCurCfgMgmtNetTable 1 } AgCurCfgMgmtNetEntry ::= SEQUENCE { agCurCfgMgmtNetIndex Integer32, agCurCfgMgmtNetSubnet IpAddress, agCurCfgMgmtNetMask IpAddress } agCurCfgMgmtNetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agCurCfgMgmtNetEntry 1 } agCurCfgMgmtNetSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Address in the current_configuration block." ::= { agCurCfgMgmtNetEntry 2 } agCurCfgMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Mask in the current_configuration block." ::= { agCurCfgMgmtNetEntry 3 } agNewCfgMgmtNetTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the new configuration block." ::= { agMgmtNetConfig 3 } agNewCfgMgmtNetEntry OBJECT-TYPE SYNTAX AgNewCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agNewCfgMgmtNetIndex } ::= { agNewCfgMgmtNetTable 1 } AgNewCfgMgmtNetEntry ::= SEQUENCE { agNewCfgMgmtNetIndex Integer32, agNewCfgMgmtNetSubnet IpAddress, agNewCfgMgmtNetMask IpAddress, agNewCfgMgmtNetDelete INTEGER } agNewCfgMgmtNetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agNewCfgMgmtNetEntry 1 } agNewCfgMgmtNetSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Address in the new_configuration block." ::= { agNewCfgMgmtNetEntry 2 } agNewCfgMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Mask in the new_configuration block." ::= { agNewCfgMgmtNetEntry 3 } agNewCfgMgmtNetDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire row is deleted." ::= { agNewCfgMgmtNetEntry 4 } agAccessUserMaxUserID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of Users ID." ::= { agAccess 1 } agAccessUserCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgAccessUserCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Access user configuration." ::= { agAccess 2 } agAccessUserCurCfgTableEntry OBJECT-TYPE SYNTAX AgAccessUserCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Access user configuration table." INDEX { agAccessUserCurCfgUId } ::= { agAccessUserCurCfgTable 1 } AgAccessUserCurCfgTableEntry ::= SEQUENCE { agAccessUserCurCfgUId Integer32, agAccessUserCurCos INTEGER, agAccessUserCurCfgName DisplayString, agAccessUserCurCfgPswd DisplayString, agAccessUserCurCfgState INTEGER } agAccessUserCurCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The User identifier." ::= { agAccessUserCurCfgTableEntry 1 } agAccessUserCurCos OBJECT-TYPE SYNTAX INTEGER { user(0), oper(3), admin(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The user class of service." ::= { agAccessUserCurCfgTableEntry 2 } agAccessUserCurCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user name." ::= { agAccessUserCurCfgTableEntry 3 } agAccessUserCurCfgPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the user passworde." ::= { agAccessUserCurCfgTableEntry 4 } agAccessUserCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable a user." ::= { agAccessUserCurCfgTableEntry 5 } agAccessUserNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgAccessUserNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Access user configuration." ::= { agAccess 3 } agAccessUserNewCfgTableEntry OBJECT-TYPE SYNTAX AgAccessUserNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Access user configuration table." INDEX { agAccessUserNewCfgUId } ::= { agAccessUserNewCfgTable 1 } AgAccessUserNewCfgTableEntry ::= SEQUENCE { agAccessUserNewCfgUId Integer32, agAccessUserNewCos INTEGER, agAccessUserNewCfgName DisplayString, agAccessUserNewCfgPswd DisplayString, agAccessUserNewCfgState INTEGER, agAccessUserNewCfgDelete INTEGER } agAccessUserNewCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The User identifier." ::= { agAccessUserNewCfgTableEntry 1 } agAccessUserNewCos OBJECT-TYPE SYNTAX INTEGER { user(0), oper(3), admin(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The user class of service." ::= { agAccessUserNewCfgTableEntry 2 } agAccessUserNewCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The user name." ::= { agAccessUserNewCfgTableEntry 3 } agAccessUserNewCfgPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The character string representing the user passworde." ::= { agAccessUserNewCfgTableEntry 4 } agAccessUserNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable a user." ::= { agAccessUserNewCfgTableEntry 5 } agAccessUserNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User" ::= { agAccessUserNewCfgTableEntry 6 } -- Statistics Group -- Packet Statistics Group -- This group represents Packet Statistics information pktStatsAllocs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 1 } pktStatsFrees OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 2 } pktStatsAllocFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 3} pktStatsMediums OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 4} pktStatsJumbos OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 5} pktStatsSmalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 6} pktStatsMediumsHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 7} pktStatsJumbosHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 8} pktStatsSmallsHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 9} -- MP CPU Statisitics Group mpCpuStatsUtil1Second OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 1 second. It shows the percentage." ::= { mpCpuStats 1} mpCpuStatsUtil4Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 4 seconds. It shows the percentage." ::= { mpCpuStats 2} mpCpuStatsUtil64Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 64 seconds. It shows the percentage." ::= { mpCpuStats 3} -- -- Port statistics table -- portStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port statistics." ::= { portStats 1 } portStatsTableEntry OBJECT-TYPE SYNTAX PortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port stats table." INDEX { portStatsIndx } ::= { portStatsTable 1 } PortStatsTableEntry ::= SEQUENCE { portStatsIndx Integer32, portStatsPhyIfInOctets Counter32, portStatsPhyIfInUcastPkts Counter32, portStatsPhyIfInNUcastPkts Counter32, portStatsPhyIfInDiscards Counter32, portStatsPhyIfInErrors Counter32, portStatsPhyIfInUnknownProtos Counter32, portStatsPhyIfOutOctets Counter32, portStatsPhyIfOutUcastPkts Counter32, portStatsPhyIfOutNUcastPkts Counter32, portStatsPhyIfOutDiscards Counter32, portStatsPhyIfOutErrors Counter32, portStatsPhyIfOutQLen Gauge32, portStatsPhyIfInBroadcastPkts Counter32, portStatsPhyIfOutBroadcastPkts Counter32, portStatsPhyIfInMulticastPkts Counter32, portStatsPhyIfOutMulticastPkts Counter32, portStatsClear INTEGER } portStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portStatsTableEntry 1 } portStatsPhyIfInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { portStatsTableEntry 2 } portStatsPhyIfInUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { portStatsTableEntry 3 } portStatsPhyIfInNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { portStatsTableEntry 4 } portStatsPhyIfInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { portStatsTableEntry 5 } portStatsPhyIfInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { portStatsTableEntry 6 } portStatsPhyIfInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::= { portStatsTableEntry 7 } portStatsPhyIfOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { portStatsTableEntry 8 } portStatsPhyIfOutUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { portStatsTableEntry 9 } portStatsPhyIfOutNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { portStatsTableEntry 10 } portStatsPhyIfOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { portStatsTableEntry 11 } portStatsPhyIfOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { portStatsTableEntry 12 } portStatsPhyIfOutQLen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the output packet queue (in packets)." ::= { portStatsTableEntry 13 } portStatsPhyIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { portStatsTableEntry 14 } portStatsPhyIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { portStatsTableEntry 15 } portStatsPhyIfInMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer." ::= { portStatsTableEntry 17 } portStatsPhyIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent." ::= { portStatsTableEntry 18 } portStatsClear OBJECT-TYPE SYNTAX INTEGER { clear(1), ok(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(1) clears the stats for this port." ::= { portStatsTableEntry 16 } -- 802.1x port stats table dot1xPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1xPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of 802.1x port statistics." ::= { portStats 2 } dot1xPortStatsTableEntry OBJECT-TYPE SYNTAX Dot1xPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the 802.1x port stats table." INDEX { dot1xPortStatsIndx } ::= { dot1xPortStatsTable 1 } Dot1xPortStatsTableEntry ::= SEQUENCE { dot1xPortStatsIndx Integer32, eapolFramesRx Integer32, eapolFramesTx Integer32, eapolStartFramesRx Integer32, eapolLogoffFramesRx Integer32, eapolRespIdFramesRx Integer32, eapolRespFramesRx Integer32, eapolReqIdFramesTx Integer32, eapolReqFramesTx Integer32, invalidEapolFramesRx Integer32, eapLengthErrorFramesRx Integer32, authEntersConnecting Integer32, authEapLogoffsWhileConnecting Integer32, authEntersAuthenticating Integer32, authSuccessesWhileAuthenticating Integer32, authTimeoutsWhileAuthenticating Integer32, authFailWhileAuthenticating Integer32, authReauthsWhileAuthenticating Integer32, authEapStartsWhileAuthenticating Integer32, authEapLogoffWhileAuthenticating Integer32, authReauthsWhileAuthenticated Integer32, authEapStartsWhileAuthenticated Integer32, authEapLogoffWhileAuthenticated Integer32, backendResponses Integer32, backendAccessChallenges Integer32, backendOtherRequestsToSupplicant Integer32, backendNonNakResponsesFromSupplicant Integer32, backendAuthSuccesses Integer32, backendAuthFails Integer32, lastEapolFrameVersion Integer32, lastEapolFrameSource MacAddress } dot1xPortStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 802.1x port stats index." ::= { dot1xPortStatsTableEntry 1 } eapolFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 2 } eapolFramesTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 3 } eapolStartFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 4 } eapolLogoffFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 5 } eapolRespIdFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 6 } eapolRespFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 7 } eapolReqIdFramesTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 8 } eapolReqFramesTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 9 } invalidEapolFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {dot1xPortStatsTableEntry 10 } eapLengthErrorFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 11 } authEntersConnecting OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 12 } authEapLogoffsWhileConnecting OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 13 } authEntersAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 14 } authSuccessesWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 15 } authTimeoutsWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 16 } authFailWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 17 } authReauthsWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 18 } authEapStartsWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 19 } authEapLogoffWhileAuthenticating OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 20 } authReauthsWhileAuthenticated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 21 } authEapStartsWhileAuthenticated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 22 } authEapLogoffWhileAuthenticated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 23 } backendResponses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 24 } backendAccessChallenges OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 25 } backendOtherRequestsToSupplicant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 26 } backendNonNakResponsesFromSupplicant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 27 } backendAuthSuccesses OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 28 } backendAuthFails OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 29 } lastEapolFrameVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 30 } lastEapolFrameSource OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { dot1xPortStatsTableEntry 31 } agDiffState OBJECT-TYPE SYNTAX INTEGER { diff(1), flashdiff(2), idle(3), inprogress(4), complete(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete." ::= { agDiff 2 } agDiffTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the diff table." ::= { agDiff 3 } agDiffTable OBJECT-TYPE SYNTAX SEQUENCE OF AgDiffTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of URL path for URL load balancing in the current_config." ::= { agDiff 4 } agDiffTableEntry OBJECT-TYPE SYNTAX AgDiffTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an URL path for URL load balancing." INDEX { agDiffIndex } ::= { agDiffTable 1 } AgDiffTableEntry ::= SEQUENCE { agDiffIndex Integer32, agDiffString OCTET STRING } agDiffIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agDiffTableEntry 1 } agDiffString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the diff table." ::= { agDiffTableEntry 2 } -- Config Dump agCfgDumpState OBJECT-TYPE SYNTAX INTEGER { dump(1), idle(2), inprogress(3), complete(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP." ::= { agCfgDump 2 } agCfgDumpTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the dump table." ::= { agCfgDump 3 } agCfgDumpTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCfgDumpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of dump strings." ::= { agCfgDump 4 } agCfgDumpTableEntry OBJECT-TYPE SYNTAX AgCfgDumpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dump table." INDEX { agCfgDumpIndex } ::= { agCfgDumpTable 1 } AgCfgDumpTableEntry ::= SEQUENCE { agCfgDumpIndex Integer32, agCfgDumpString OCTET STRING } agCfgDumpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agCfgDumpTableEntry 1 } agCfgDumpString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the dump table." ::= { agCfgDumpTableEntry 2 } -- GeaPort Information geaportInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GeaportInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gea port mapping." ::= { geaportInfo 1 } geaportInfoTableEntry OBJECT-TYPE SYNTAX GeaportInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the geaport table mapping." INDEX { geaportInfoLogicalIndex } ::= { geaportInfoTable 1 } GeaportInfoTableEntry ::= SEQUENCE { geaportInfoLogicalIndex Integer32, geaportInfoPort INTEGER, geaportInfoUnit INTEGER } geaportInfoLogicalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The logical port index." ::= { geaportInfoTableEntry 1 } geaportInfoPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The GEA Port (0-based)." ::= { geaportInfoTableEntry 2 } geaportInfoUnit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The GEA Unit." ::= { geaportInfoTableEntry 3 } -- UFDFO Information ufdInfoState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Failure Detection State." ::= { ufdInfo 1 } ufdInfoLtMStatus OBJECT-TYPE SYNTAX INTEGER{ up(1), down(2), forwarding(3), blocked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "LtM Status." ::= { ufdInfo 2 } ufdInfoLtMPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM." ::= { ufdInfo 3 } ufdInfoLtMTrunks OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM." ::= { ufdInfo 4 } ufdInfoLtDStatus OBJECT-TYPE SYNTAX INTEGER{ up(1), autoDisabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "LtD status." ::= { ufdInfo 5 } ufdInfoLtDPorts OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD." ::= { ufdInfo 6 } ufdInfoLtDTrunks OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD." ::= { ufdInfo 7 } -- NTP Statisitics ntpPrimaryServerReqSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP requests sent to Primary NTP Server." ::= { ntpStats 1 } ntpPrimaryServerRespRcvd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP responces received from Primary NTP Server." ::= { ntpStats 2 } ntpPrimaryServerUpdates OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP Updates by Primary NTP Server." ::= { ntpStats 3 } ntpSecondaryServerReqSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP requests sent to Secondary NTP Server." ::= { ntpStats 4 } ntpSecondaryServerRespRcvd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP responces received from Secondary NTP Server." ::= { ntpStats 5 } ntpSecondaryServerUpdates OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP Updates by Secondary NTP Server." ::= { ntpStats 6 } ntpLastUpdateServer OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of ntp server updated last time." ::= { ntpStats 7 } ntpLastUpdateTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last time updated by ntp server." ::= { ntpStats 8 } ntpClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the stats for ntp." ::= { ntpStats 9 } ntpSystemCurrentTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current system time." ::= { ntpStats 10 } -- -- AclPort statistics table -- aclPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AclPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of aclPort statistics." ::= { aclPortStats 1 } aclPortStatsTableEntry OBJECT-TYPE SYNTAX AclPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the aclPort stats table." INDEX { aclPortStatsIndx } ::= { aclPortStatsTable 1 } AclPortStatsTableEntry ::= SEQUENCE { aclPortStatsIndx Integer32, aclPortStatsHits Counter32, aclPortClearStats INTEGER } aclPortStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aclPort index." ::= { aclPortStatsTableEntry 1 } aclPortStatsHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits for this ACL entry on given port" ::= { aclPortStatsTableEntry 2 } aclPortClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the stats for the ACL." ::= { aclPortStatsTableEntry 3 } aclMeterPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AclMeterPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of aclMeterPort statistics." ::= { aclMeterPortStats 1 } aclMeterPortStatsTableEntry OBJECT-TYPE SYNTAX AclMeterPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the aclMeterPort stats table." INDEX { aclMeterPortStatsIndx } ::= { aclMeterPortStatsTable 1 } AclMeterPortStatsTableEntry ::= SEQUENCE { aclMeterPortStatsIndx Integer32, aclMeterPortStatsHits Counter32, aclMeterPortClearStats INTEGER } aclMeterPortStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aclMeterPort index." ::= { aclMeterPortStatsTableEntry 1 } aclMeterPortStatsHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits for this ACL Meter entry on given port" ::= { aclMeterPortStatsTableEntry 2 } aclMeterPortClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the stats for the ACL meter." ::= { aclMeterPortStatsTableEntry 3 } -- ---------------------------------------------------------------------------- -- } INSERT: bt2Switch -- ---------------------------------------------------------------------------- END