BAY-STACK-IP-FWD-NH-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC InterfaceIndex FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetAddressPrefixLength, InetPortNumber FROM INET-ADDRESS-MIB bayStackMibs FROM SYNOPTICS-ROOT-MIB; bayStackIpFwdNhMib MODULE-IDENTITY LAST-UPDATED "201104150000Z" ORGANIZATION "Nortel Networks" CONTACT-INFO "Nortel Networks" DESCRIPTION "Nortel IP Forwarding Next Hop MIB Copyright 2009 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201104150000Z" -- 15 April 2011 DESCRIPTION "v6: Added bsifnPolicyInterfaceAdminStatus." REVISION "201010220000Z" -- 22 October 2010 DESCRIPTION "v5: Clarified policy L4 port match usage and added bsifnPolicyMatchPortType object. Added support for the definition of secondary next hop data through the bsifnPolicySetSecondNextHopInetAddressType and bsifnPolicySetSecondNextHopInetAddress objects. Defined bsifnInstallationFailure trap." REVISION "200909300000Z" -- 30 September 2009 DESCRIPTION "v4: Added IMPLIED to INDEX clauses." REVISION "200909110000Z" -- 12 September 2009 DESCRIPTION "v3: Added bsifnPolicyInterfaceOperationalStatus and bsifnPolicyInterfaceAction." REVISION "200908260000Z" -- 26 August 2009 DESCRIPTION "v2: Changed mask object to InetAddressPrefixLength." REVISION "200908210000Z" -- 21 August 2009 DESCRIPTION "v1: Initial version." ::= { bayStackMibs 35 } bayStackIpFwdNhNotifications OBJECT IDENTIFIER ::= { bayStackIpFwdNhMib 0 } bayStackIpFwdNhObjects OBJECT IDENTIFIER ::= { bayStackIpFwdNhMib 1 } -- ============================================================================ -- Textual Conventions -- ============================================================================ -- ============================================================================ -- Scalar Objects -- ============================================================================ bsifnScalars OBJECT IDENTIFIER ::= { bayStackIpFwdNhObjects 1 } bsifnIpForwardingNextHopAdminEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether IP Forwarding Next-Hop is enabled." ::= { bsifnScalars 1 } bsifnIpForwardingNextHopOperEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether IP Forwarding Next-Hop is enabled." ::= { bsifnScalars 2 } -- ============================================================================ -- bsifnPolicyTable -- ============================================================================ bsifnPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF BsifnPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the schedule for activation and deactivation of the Nortel Energy Saver feature." ::= { bayStackIpFwdNhObjects 2 } bsifnPolicyEntry OBJECT-TYPE SYNTAX BsifnPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An energy saver schedule entry, indicates a time to activate or deactivate energy savings." INDEX { IMPLIED bsifnPolicyName } ::= { bsifnPolicyTable 1 } BsifnPolicyEntry ::= SEQUENCE { bsifnPolicyName SnmpAdminString, bsifnPolicyMatchInetAddressType InetAddressType, bsifnPolicyMatchInetAddress InetAddress, bsifnPolicyMatchInetAddressMask InetAddressPrefixLength, bsifnPolicyMatchPortMin InetPortNumber, bsifnPolicyMatchPortMax InetPortNumber, bsifnPolicySetNextHopInetAddressType InetAddressType, bsifnPolicySetNextHopInetAddress InetAddress, bsifnPolicyRowStatus RowStatus, bsifnPolicyMatchPortType INTEGER, bsifnPolicySetSecondNextHopInetAddressType InetAddressType, bsifnPolicySetSecondNextHopInetAddress InetAddress } bsifnPolicyName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the policy." ::= { bsifnPolicyEntry 1 } bsifnPolicyMatchInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address contained in the corresponding instance of bsifnPolicyMatchInetAddress. The value of bsifnPolicyMatchInetAddressMask must also be consistent with the address type specified in this object." ::= { bsifnPolicyEntry 2 } bsifnPolicyMatchInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address to be matched" ::= { bsifnPolicyEntry 3 } bsifnPolicyMatchInetAddressMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "Length of the mask to be used for matching." ::= { bsifnPolicyEntry 4 } bsifnPolicyMatchPortMin OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum port number to match." DEFVAL { 0 } ::= { bsifnPolicyEntry 5 } bsifnPolicyMatchPortMax OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum port number to match." DEFVAL { 65535 } ::= { bsifnPolicyEntry 6 } bsifnPolicySetNextHopInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address contained in the corresponding instances of bsifnPolicySetNextHopInetAddress." ::= { bsifnPolicyEntry 7 } bsifnPolicySetNextHopInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The next hop address." ::= { bsifnPolicyEntry 8 } bsifnPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries." ::= { bsifnPolicyEntry 9 } bsifnPolicyMatchPortType OBJECT-TYPE SYNTAX INTEGER { tcp(1), udp(2), bothTcpAndUdp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of L4 port to match. A value of tcp(1) indicates that TCP packets are targeted while a value of ubp(2) indicates that UDP packets are targeted. The default value of bothTcpAndUdp(3) indicates that both TCP and UDP packets are examined for matching purposes." DEFVAL { bothTcpAndUdp } ::= { bsifnPolicyEntry 10 } bsifnPolicySetSecondNextHopInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address contained in the corresponding instances of bsifnPolicySetSecondNextHopInetAddress." DEFVAL { ipv4 } ::= { bsifnPolicyEntry 11 } bsifnPolicySetSecondNextHopInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The secondary next hop address. This address is used in place of the primary next hop address (bsifnPolicySetNextHopInetAddress) if the primary address is unresolved but the secondary address is resolved." DEFVAL { '00000000'h } ::= { bsifnPolicyEntry 12 } -- ============================================================================ -- bsifnPolicyInterfaceTable -- ============================================================================ bsifnPolicyInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF BsifnPolicyInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains per-interface policy settings" ::= { bayStackIpFwdNhObjects 3 } bsifnPolicyInterfaceEntry OBJECT-TYPE SYNTAX BsifnPolicyInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy settings for an interface." INDEX { bsifnPolicyInterfaceIndex, IMPLIED bsifnPolicyInterfacePolicyName } ::= { bsifnPolicyInterfaceTable 1 } BsifnPolicyInterfaceEntry ::= SEQUENCE { bsifnPolicyInterfaceIndex InterfaceIndex, bsifnPolicyInterfacePolicyName SnmpAdminString, bsifnPolicyInterfaceMode INTEGER, bsifnPolicyInterfaceOperationalStatus INTEGER, bsifnPolicyInterfaceAction INTEGER, bsifnPolicyInterfaceRowStatus RowStatus, bsifnPolicyInterfaceAdminStatus INTEGER } bsifnPolicyInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of an interface." ::= { bsifnPolicyInterfaceEntry 1 } bsifnPolicyInterfacePolicyName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a policy associated with this interface. This value refers to an instance of bsifnPolicyName." ::= { bsifnPolicyInterfaceEntry 2 } bsifnPolicyInterfaceMode OBJECT-TYPE SYNTAX INTEGER { drop(1), normalRouting(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The policy mode." ::= { bsifnPolicyInterfaceEntry 3 } bsifnPolicyInterfaceOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's SBR operational status." ::= { bsifnPolicyInterfaceEntry 4 } bsifnPolicyInterfaceAction OBJECT-TYPE SYNTAX INTEGER { drop(1), normalRouting(2), enable(3), notApplicable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's SBR action." ::= { bsifnPolicyInterfaceEntry 5 } bsifnPolicyInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries in this table." ::= { bsifnPolicyInterfaceEntry 6 } bsifnPolicyInterfaceAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Used to enable/disable an entry." ::= { bsifnPolicyInterfaceEntry 7 } -- ============================================================================ -- Notification Objects -- ============================================================================ -- ============================================================================ -- Notifications -- ============================================================================ bsifnInstallationFailure NOTIFICATION-TYPE STATUS current DESCRIPTION "Signifies that filter data associated with the IP fwd-nh functionality could not be installed due current resource limitations." ::= { bayStackIpFwdNhNotifications 1 } END