BAS-IF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI InterfaceIndex, ifEntry FROM IF-MIB basExtIf, BasChassisId, BasSlotId, BasInterfaceId, BasLogicalPortId FROM BAS-MIB; basIfMIB MODULE-IDENTITY LAST-UPDATED "9811061430Z" ORGANIZATION "Broadband Access Systems, Inc." CONTACT-INFO " Tech Support Broadband Access Systems, Inc. 201 Forest Street Marlborough, MA 01752 USA 508-485-8200 support@basystems.com" DESCRIPTION "The MIB module defines the configuration MIB objects for Broadband Access Systems, Inc. interfaces extensions." ::= { basExtIf 1 } -- the BAS Interfaces table -- The BAS Interfaces table contains BAS proprietaryinformation on -- the entity's interfaces. basIfTable OBJECT-TYPE SYNTAX SEQUENCE OF BasIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber." ::= { basIfMIB 2 } basIfEntry OBJECT-TYPE SYNTAX BasIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." AUGMENTS { ifEntry } ::= { basIfTable 1 } BasIfEntry ::= SEQUENCE { basIfChassis BasChassisId, basIfSlot BasSlotId, basIfInterface BasInterfaceId, basIfLPort BasLogicalPortId, basIfClass INTEGER, basIfSimpleProxyArp INTEGER, basIfDhcpCmSubnet IpAddress, basIfDhcpHostSubnet IpAddress, basIfArpAgingDisable INTEGER, basIfSecurityFilter INTEGER } basIfChassis OBJECT-TYPE SYNTAX BasChassisId MAX-ACCESS read-only STATUS current DESCRIPTION "The BAS Chassis ID of this card." ::= { basIfEntry 1 } basIfSlot OBJECT-TYPE SYNTAX BasSlotId MAX-ACCESS read-only STATUS current DESCRIPTION "The BAS Slot ID of this card." ::= { basIfEntry 2 } basIfInterface OBJECT-TYPE SYNTAX BasInterfaceId MAX-ACCESS read-only STATUS current DESCRIPTION "The BAS interface ID of this card." ::= { basIfEntry 3 } basIfLPort OBJECT-TYPE SYNTAX BasLogicalPortId MAX-ACCESS read-only STATUS current DESCRIPTION "The BAS logical port ID of this card." ::= { basIfEntry 4 } basIfClass OBJECT-TYPE SYNTAX INTEGER { icl(1), ccl(2), egress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The BAS class of this interface." ::= { basIfEntry 5 } basIfSimpleProxyArp OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable simple proxy ARP so CMTS hosts can communicate with one another." ::= { basIfEntry 6 } basIfDhcpCmSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet to use for giaddr for cable modem DHCP requests." ::= { basIfEntry 7 } basIfDhcpHostSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet to use for giaddr for host DHCP requests." ::= { basIfEntry 8 } basIfArpAgingDisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable timing out ARP enties on this interface." ::= { basIfEntry 9 } basIfSecurityFilter OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable security filtering on this interface. If this filter is enabled all packets sent to 10.x.13.x from a CM other than SNMP,DHCP,ICMP,TOD,SYSLOG, and TFTP will be dropped and all packets from CPE other than ICMP and DHCP will be dropped." ::= { basIfEntry 10 } END