Avaya-96xxIPTelephone-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, OBJECT-TYPE, MODULE-IDENTITY, Integer32, IpAddress FROM SNMPv2-SMI DisplayString FROM RFC1213-MIB ; avaya96xxMIB MODULE-IDENTITY LAST-UPDATED "0908052000Z" ORGANIZATION "avaya" CONTACT-INFO "Avaya Customer Services Avaya, Inc. 211 Mt. Airy Road Basking Ridge, NJ 07920 US (A WWW: www.avaya.com Tel: +1 908 953 6000" DESCRIPTION "MIB Module for 96xx IP Telephones as of Release S3.1 in accordance with 96xx IP RFS 110716, Issue 3.1. Copyright 2009 by Avaya Inc. All rights reserved." ::= { ipEndpointMIBs 2 } avaya OBJECT IDENTIFIER ::= { enterprises 6889 } products OBJECT IDENTIFIER ::= { avaya 1 } avayaMibs OBJECT IDENTIFIER ::= { avaya 2 } avayaipEndpointProd OBJECT IDENTIFIER ::= { products 69 } ipEndpointMIBs OBJECT IDENTIFIER ::= { avayaMibs 69 } endptID OBJECT IDENTIFIER ::= { avaya96xxMIB 1 } endptAGCHAND OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability is currently enabled, else 0." ::= { endptID 1 } endptAGCHEAD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability is currently enabled, else 0." ::= { endptID 2 } endptAGCSPKR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Speakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability is currently enabled, else 0." ::= { endptID 3 } endptAPPINUSE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Application file name. This variable returns the name of the application file in the endpoint." ::= { endptID 4 } endptAPPNAME OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Application file ID. This variable returns a string specifying the system-specific application file that should be used for telephone operation." ::= { endptID 5 } endptBAKLIGHTOFF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Backlight idle timer setting. This variable returns the number of minutes of idle time, after which the telephone backlightis turned off. Range is 0-999, with a default of 120. Used in phones with backlit displays." ::= { endptID 6 } endptBOOTNAME OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Boot code file ID. This variable returns a string specifying the boot code file used to initiate telephone operation." ::= { endptID 7 } endptBRURI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Backup and restore URI. This variable returns a string specifying the URI used for backup and restore files." ::= { endptID 8 } endptCNAPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Chatter server port. This variable returns the Chatter server registration transport-layer port number (from 0 to 65535; default is 8888)." ::= { endptID 9 } endptCNASRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CNA server addresses. This variable returns zero or more Chatter server addresses for network analysis, in dotted decimal or DNS format." ::= { endptID 10 } endptCODECR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive codec. This variable returns the designation of the Receive codec currently in use." ::= { endptID 11 } endptCODECT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit codec. This variable returns the designation of the Transmit codec currently in use." ::= { endptID 12 } endptDHCPLEASEREBIND OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rebind time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to rebind the IPADD lease, in seconds as received by DHCP option 59 or as computed from the lease time if option 59 is is not received." ::= { endptID 13 } endptDHCPLEASERENEW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Renewal time of IPADD lease. This variable returns an unsigned integer specifying the length of time at which to renew the IPADD lease, in seconds as received by DHCP option 58 or as computed from the lease time if option 58 is is not received." ::= { endptID 14 } endptDHCPLEASETIME OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of IPADD lease. This variable returns an unsigned integer specifying the length of time of the IPADD lease, in seconds as received by DHCP option 51." ::= { endptID 15 } endptDNSSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of DNS server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of DNS servers available for use." ::= { endptID 16 } endptDOMAIN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of DNS domain labels. This variable returns a sequence of labels, separated by periods, for use as the highest-level domain in resolving DNS names in system values." ::= { endptID 17 } endptDOT1X OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current value for 802.1X handling. This variable returns 0 if Supplicant operation is Enabled, 1 if Supplicant operation is Enabled with proxy Logoff, and 2 if Supplicant operation is Disabled. The default is 0." ::= { endptID 18 } endptDSCPAUD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP for audio. This variable specifies the Differentiated Services Code Point for audio currently in use (between 0 and 63 inclusive)." ::= { endptID 19 } endptDSCPBBE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "DSCP BBE priority value. This variable returns an integer between 0 and 7 inclusive specifying the far-end endpoint's DiffServ Better than Best Effort audio priority value." ::= { endptID 20 } endptDSCPSIG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " DSCP for signaling. This variable specifies the Differentiated Services Code Point for signaling currently in use (between 0 and 63 inclusive)." ::= { endptID 21 } endptDSPVERSION OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DSP Version. This variable returns a string of up to 10 characters, that identifies the version of the DSP firmware in the endpoint." ::= { endptID 22 } endptFEIPADD OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Audio endpoint address. This variable returns a 4-octet string specifying the address of the far-end audio endpoint currently in use." ::= { endptID 23 } endptFEPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Audio endpoint port number. This variable returns the far-end endpoint's transport layer port number for audio, currently in use." ::= { endptID 24 } endptGIPADD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of router addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of routers available for use." ::= { endptID 25 } endptGIPINUSE OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Router address. This variable returns a 4-octet string specifying the IP address of the router currently in use." ::= { endptID 26 } endptGROUP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Group identifier. This variable returns the integer corresponding to the current group identifier." ::= { endptID 27 } endptHTTPDIR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HTTP server Directory. This variable returns the path used in formation of the URI for HTTP GET operations." ::= { endptID 28 } endptHTTPSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "HTTP server IP addresses. This variable returns a comma-separated list of HTTP server IP addresses available for use, in dotted-decimal or DNS format." ::= { endptID 29 } endptHTTPUSED OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "HTTP initialization server IP address. This variable returns a 4-octet IP address for the HTTP server used during initialization (all zeroes if no server successfully used during initialization)." ::= { endptID 30 } endptICMPDU OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current value for ICMP Destination message handling. This variable returns 0 if the telephone does not transmit ICMP Destination Unreachable messages are not transmitted; 1 if such messages are transmitted only in response to datagrams that designate closed UDP ports or if the designated transport protocol is not supported, and 2 if such such messages are sent only in response to datagrams that designate closed UDP or TCP ports or if the designated transport protocol is not supported. The default is 1." ::= { endptID 31 } endptICMPRED OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current value for ICMP Redirect message handling. This variable returns 1 if received Redict messages are handled as specified in RFC 1122, Sections 3.2.2.2 and 3.3.1.2, else 0. The default is 0." ::= { endptID 32 } endptIPADD OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Endpoint IP address. This variable returns a 4-octet string specifying the endpoint's current IP address." ::= { endptID 33 } endptJMSEC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Jitter buffer size. This variable returns the number of milliseconds of delay added to compensate for network jitter, from 0-300 milliseconds. The default is 10." ::= { endptID 34 } endptL2Q OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "802.1Q framing flag. This variable returns 0 if the Layer 2 802.1Q framing parameter is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled." ::= { endptID 35 } endptL2QAUD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Audio priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q audio priority value." ::= { endptID 36 } endptL2QSIG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Signaling priority. This variable returns an integer between 0 and 7 inclusive specifying the current Layer 2 802.1Q signaling priority value." ::= { endptID 37 } endptL2QSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "802.1Q tagging flag. This variable returns 0 if the Layer 2 802.1Q tagging parameter is currently OFF, else 1." ::= { endptID 38 } endptL2QVLAN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Administered Telephone VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the administered Layer 2 802.1Q VLAN Identifier value." ::= { endptID 39 } endptL2QVLANINUSE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Telephone VLAN Identifier in use. This variable returns an integer between 0 and 4094 inclusive specifying the current Layer 2 802.1Q VLAN Identifier value." ::= { endptID 40 } endptLOGSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Event Log server address. This variable returns at most one IP address, in dotted-decimal or DNS format, of the server to be used for event logging. This function is intended for Avaya use, in debugging if necessary." ::= { endptID 41 } endptMACADDR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address. This variable returns a 6-octet string specifying the endpoint's MAC address." ::= { endptID 42 } endptMODEL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Model identifier. This variable returns a string of up to 8 ASCII characters." ::= { endptID 43 } endptNETMASK OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet mask. This variable returns a 4-octet string specifying the subnet mask currently in use." ::= { endptID 44 } endptPHONECC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Phone comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode of the endpoint itself." ::= { endptID 45 } endptPHONESN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Housing serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the outside of the endpoint's housing." ::= { endptID 46 } endptPHY1DUPLEX OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet line interface duplex setting. This variable returns 1 if the interface is half-duplex and 2 if the interface is full duplex." ::= { endptID 47 } endptPHY1SPEED OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet interface speed. This variable returns a string specifying the endpoint's Ethernet interface speed in Mbps: '100' or '10'." ::= { endptID 48 } endptPHY1STAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface is currently NOT enabled, 1 if the Ethernet line interface is currently for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex." ::= { endptID 49 } endptPHY2DUPLEX OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary Ethernet interface duplex setting. This variable returns 0 if no link is established, 1 if the interface is half-duplex,and 2 if the interface is full duplex." ::= { endptID 50 } endptPHY2PRIO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary Ethernet interface Layer 2 priority. This variable returns 0 through 7, and is used with endptVLANSEP. The default is 0." ::= { endptID 51 } endptPHY2SPEED OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary Ethernet speed. This variable returns a string specifying the endpoint's Ethernet interface speed in Mbps: '100' or '10' or '0'." ::= { endptID 52 } endptPHY2STAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary Ethernet interface status. This variable returns 0 if the endpoint's Secondary Ethernet interface is currently NOT enabled, 1 if the Secondary Ethernet interface is currently for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex." ::= { endptID 53 } endptPHY2VLAN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary Ethernet interface VLAN ID. This variable returns an integer between 0 and 4094 inclusive specifying the current Layer 2 802.1Q VLAN Identifier value for tagged frames received on the secondary Ethernet interface while VLAN separation is enabled." ::= { endptID 54 } endptPORTAUD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transport-layer audio port. This variable returns the endpoint's transport layer port number for audio, currently in use." ::= { endptID 55 } endptPROCPSWD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Local Procedure Password. This variable returns 0 if the Local Procedure Password is null, else 1." ::= { endptID 56 } endptPROCSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Local Procedure flag. This variable returns 0 if Local Procedures are currently allowed for this telephone, else 1." ::= { endptID 57 } endptPWBCC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PWB comcode. This variable returns a string of up to 9 numerical characters, specifying the comcode or version number of the printed wiring board of the endpoint." ::= { endptID 58 } endptPWBSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PWB serial number. This variable returns a string of up to 18 ASCII characters, specifying the serial number on the endpoint's printed wiring board, or N/A if the board has no serial number." ::= { endptID 59 } endptRTCPCONT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RTCP Control flag. This variable returns 0 if the RTCP control status is off/disabled, else 1." ::= { endptID 60 } endptRTCPFLOW OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RTCP Flowrate. This variable returns an integer between 5 and 30 inclusive specifying the RTCP flowrate in milliseconds." ::= { endptID 61 } endptRTCPMON OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RTCP Monitor address. This variable returns a 4-octet string specifying the IP address of the RTCP monitor currently in use." ::= { endptID 62 } endptRSVPCONT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RSVP Control flag. This variable returns 0 if the RSVP control status is off/disabled, else 1." ::= { endptID 63 } endptRSVPRFRSH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RSVP Refresh rate. This variable returns an integer between 1 and 3600 inclusive specifying the RSVP refresh rate in milliseconds." ::= { endptID 64 } endptRSVPRTRY OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RSVP Failed Retry flag. This variable returns 0 if the RSVP Failed Retry Reservation control status is off/disabled, else 1." ::= { endptID 65 } endptRSVPPROF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RSVP profile flag. This variable returns 0 if the RSVP profile is guaranteed, else 1 for controlled load." ::= { endptID 66 } endptSIG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Signaling protocol download flag. This variable returns the integer corresponding to the current signaling protocol." ::= { endptID 67 } endptSNMPADD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP source addresses. This variable returns one or more allowable source IP addresses for SNMP queries, in dotted decimal or DNS format." ::= { endptID 68 } endptSTATIC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Static programming override flag. This variable returns the integer corresponding to the current level of override permissions for static programming." ::= { endptID 69 } endptTLSSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TLS server addresses. This variable returns zero or more Transport Layer Security server addresses for software download, in dotted decimal or DNS format." ::= { endptID 70 } endptTLSUSED OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "TLS server address used. This variable returns the TLS server address from TLSSRVR used, if any, during initialization, or all zeroes if no TLS server was used." ::= { endptID 71 } endptTMSEC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit buffer fill level. This variable returns the transmit buffer minimum fill level, in msec, currently in use." ::= { endptID 72 } endptVLANLIST OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID list. This variable returns a list of zero or more VLAN IDs." ::= { endptID 73 } endptVLANSEP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN separation value. This variable returns 0 if frames received on the secondary Ethernet interface are unchanged before forwarding; else 1, which is the default." ::= { endptID 74 } endptFONT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Font file identifier. This variable returns a text string with the name of the font file stored in the phone, if any." ::= { endptID 75 } endptLANGFILES OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Language file list. This variable returns a comma-separated text string listing the language files stored in the phone, if any." ::= { endptID 76 } endptPHNEMERGNUM OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Emergency Number. This variable returns a telephone number to be dialed when an Emergency softkey is pressed." ::= { endptID 77} endptAUDIOENV OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Audio Environment parameter. This variable returns the current value of AUDIOENV." ::= { endptID 78} endptAUDIOSTHD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Audio Handset Sidetone parameter. This variable returns the current value of AUDIOSTHD." ::= { endptID 79} endptAUDIOSTHS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Audio Headset Sidetone parameter. This variable returns the current value of AUDIOSTHS." ::= { endptID 80} endptBRAUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Backup/Restore authentication control. This variable returns 0 if the call server IP address and telephone's registration password is NOT not included as credentials in an Authentication request-header; 1 (the default) if that data is included and the telephone will accept the server's digital certificate if signed by Avaya, or 2 if that data is included and the telephone will accept the server's digital certificate if signed by Avaya or a trusted certificate based on TRUSTCERTS." ::= { endptID 81} endptDHCPINUSE OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address of DHCP server from which phone's IP address was obtained. This variable returns four zeroes by default or when the telephone is manually programmed." ::= { endptID 82 } endptDHCPLEASEEXP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP lease expiration. This variable returns the time (in seconds) remaining until the expiration of the current DHCP lease; or 0 if the lease has expired." ::= { endptID 83 } endptDHCPSTD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP compliance flag. This variable returns 0 (the default) if the telephone ignores the DHCP standard and continues using its IP address after its lease has expired, assuming the DHCP server cannot be reached. The value 1 is returned if the DHCP standard is followed and the telephone stops using its IP address (IPADD)." ::= { endptID 84} endptDHCPT1REM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP lease renewal expiration. This variable returns the time (in seconds) until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired." ::= { endptID 85 } endptDHCPT2REM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "DHCP lease rebinding expiration. This variable returns the time (in seconds) remaining until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired." ::= { endptID 86 } endptDOT1XSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X Supplicant status. This variable returns 0 if 802.1X Supplicant mode is Disabled; 1 (the default) if the supplicant mode is set to Unicast-only, and 2 if the supplicant mode is set to Unicast/Multicast." ::= { endptID 87} endptHTTPPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "HTTP port number. This variable returns the TCP port number used for HTTP file downloading." ::= { endptID 88} endptTLSDIR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TLS Server Directory. This variable returns the path that is prepended to all file names used in HTTPS GET operations." ::= { endptID 89} endptTLSPORT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "TLS server port number. This variable returns the TCP port number used for HTTPS file downloading." ::= { endptID 90} endptMEMHEAPFREE OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Heap allocation. This variable returns the number of bytes of volatile memory currently allocated for, but unused by, the Heap." ::= { endptID 91} endptSSONCONTENT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SSON Content. This variable returns the data portion of the DHCP site-specific option designated by NVSSON, exactly as received." ::= { endptID 92} endptTLSSRVRID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TLS server ID flag. This variable returns 1 if the TLS server identity is to be checked against its certificate, otherwise 0." ::= { endptID 93} endptTRUSTCERTS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Trusted Certificates list. This variable returns the current trusted certificates to be downloaded; 0-255 ASCII characters, 0 or more filenames or URLs separated by commas." ::= { endptID 94} endptVOXFILES OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Voice language files list. This variable returns the current list of voice langauge files to be downloaded; 0-255 ASCII characters, 0 or more filenames separated by commas." ::= { endptID 95} endptGRATARP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gratuitous ARP flag. This variable returns 1 oif gratuitous ARP messages are to be process; else 0." ::= { endptID 96 } endptNVM OBJECT IDENTIFIER ::= { avaya96xxMIB 2 } endptNVAGCHAND OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Non-Volatile Memory (NVM)Handset AGC status. This variable returns 1 if the endpoint's handset Automatic Gain Control capability in NVM is currently enabled, else 0." ::= { endptNVM 1 } endptNVAGCHEAD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Headset AGC status. This variable returns 1 if the endpoint's headset Automatic Gain Control capability in NVM is currently enabled, else 0." ::= { endptNVM 2 } endptNVAGCSPKR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Speakerphone AGC status. This variable returns 1 if the endpoint's speakerphone Automatic Gain Control capability in NVM is currently enabled, else 0." ::= { endptNVM 3 } endptNVALERT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Alerting Mode flag. This variable returns 1 if the alerting mode setting in non-volatile memory is enabled, else 0." ::= { endptNVM 4 } endptNVAUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Script file authentication flag. This variable returns 1 if the endpoint must authenticate script files, else 0." ::= { endptNVM 5 } endptNVBRIGHTNESS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Display Brightness setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-5, with 4 the default." ::= { endptNVM 6 } endptNVCALLSRVR OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "NVM IP address of call server if manually entered. Default is four zeroes." ::= { endptNVM 7 } endptNVCHADDR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Manually-entered DHCP chaddr value. This variable returns a manually-entered value for the DHCP chaddr field as stored in non-volatile memory, if any. A Hexadecimal value with range of 0 (the default) to 999999." ::= { endptNVM 8 } endptNVCONTRAST OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Display Contrast setting. This variable returns the value of the display contrast setting in non-volatile memory. Range is 0-15, with 8 the default." ::= { endptNVM 9 } endptNVFILESRVR OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "NVM File server address. This variable returns a 4-octet string specifying the IP address of the file server as stored in NVM." ::= { endptNVM 10 } endptNVGIPADD OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Router address. This variable returns a 4- octet string specifying the IP address of the router as stored in NVM." ::= { endptNVM 11 } endptNVIPADD OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "NVM IP address. This variable returns a 4-octet string specifying the endpoint's IP address stored in NVM." ::= { endptNVM 12 } endptNVL2Q OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if the Layer 2 802.1Q framing parameter in NVM is set to 'auto', 1 if it is set to on/enabled, else 2 for off/disabled." ::= { endptNVM 13 } endptNVL2QVLAN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM VLAN Identifier. This variable returns an integer between 0 and 4094 inclusive specifying the Layer 2 802.1Q VLAN Identifier value stored in NVM." ::= { endptNVM 14 } endptNVLOGSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Event Log flag. This variable returns 0 if the endpoint's event logging capability in NVM is currently NOT enabled, else 1." ::= { endptNVM 15 } endptNVNETMASK OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Subnet mask. This variable returns a 4-octet string specifying the subnet mask as stored in NVM." ::= { endptNVM 16 } endptNVPHY1STAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Ethernet line interface status. This variable returns 0 if the endpoint's Ethernet line interface in NVM iscurrently NOT enabled, 1 if the Ethernet line interface in NVM is currently for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex." ::= { endptNVM 17 } endptNVPHY2STAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Secondary Ethernet interface setting. This variable returns 0 if the endpoint's secondary Ethernet interface in NVM is currently NOT enabled(or none exists), 1 if the hub is set for auto-negotiation, 2 for 10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps half-duplex, and 5 for 100Mbps full-duplex." ::= { endptNVM 18 } endptNVSSON OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM Site-specific option number. This variable returns an integer between 128 and 254 inclusive, specifying the SSON stored in NVM. The default is 176." ::= { endptNVM 19 } endptNVVLANTEST OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "NVM VLAN pause parameter. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid values are integers from 0 to 999 inclusive." ::= { endptNVM 20 } endptNVLANGFILE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Language file. This variable returns the name of the language file in non-volatile memory." ::= { endptNVM 21 } endptNVTRUSTLIST OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of trusted certificates. This variable returns 0-255 ASCII characters: 0 or more filenames or URLs separated by commas and without intervening spaces, containing the list of downloaded trusted certificates in non-volatile memory." ::= { endptNVM 22 } endptNVVOXFILE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Voice language file. This variable returns 0-32 ASCII characters: 0 or 1filename, identifying the voice language file, if any, in non-volatile memory." ::= { endptNVM 23 } endptNVRINGTONESTYLE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Ringing style identifier. This variable returns the number of seconds stored in NVM for the endppoint to wait for a DHCPOFFER message when using a non-zero VLAN ID. Valid values are integers from 0 to 999 inclusive." ::= { endptNVM 24 } endptNVSBM24BRIGHTNESS1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "SBM24 backlight level. This variable returns the value of the backlight brightness for the first SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5 inclusive." ::= { endptNVM 25 } endptNVSBM24BRIGHTNESS2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "SBM24 backlight level. This variable returns the value of the backlight brightness for the second SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5 inclusive." ::= { endptNVM 26 } endptNVSBM24BRIGHTNESS3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "SBM24 backlight level. This variable returns the value of the backlight brightness for the third SBM24 attached, to the telephone, if any. Valid values are integers from 1 to 5 inclusive." ::= { endptNVM 27 } endptMaintenance OBJECT IDENTIFIER ::= { avaya96xxMIB 3 } endptAPPSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Application download flag. This variable returns '0' if the most recent attempt to download and store an application file was successful. This variable returns '1' if the most recent attempt to download an application file was successful but the file was not successfully stored in NVM. This variable returns '2' if the most recent attempt to download an application file was NOT successful." ::= { endptMaintenance 1 } endptUPGRADESTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Script loading status flag. This variable returns '0' if a 96xxupgrade.txt file was successfully obtained and interpreted since the last power-up or reset. This variable returns '1' if the file was successfully obtained but NOT successfully interpreted since the last power-up or reset. This variable returns '2' if the file was NOT successfully obtained since the last power-up or reset." ::= { endptMaintenance 2 } endptRecentLog OBJECT-TYPE SYNTAX SEQUENCE OF EndptRecentLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first." ::= { endptMaintenance 3 } endptRecentLogEntry OBJECT-TYPE SYNTAX EndptRecentLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 syslog event messages added since last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first." INDEX { endptRecentLogText } ::= { endptRecentLog 1 } EndptRecentLogEntry ::= SEQUENCE { endptRecentLogText DisplayString } endptRecentLogText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Syslog event message." ::= { endptRecentLogEntry 1 } endptResetLog OBJECT-TYPE SYNTAX SEQUENCE OF EndptResetLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first." ::= { endptMaintenance 4 } endptResetLogEntry OBJECT-TYPE SYNTAX EndptResetLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 syslog event messages added before the last reset or power-up, each of which has severity code less than the value of NVLOGLOCAL. Entries are in chronological order, oldest first." INDEX { endptResetLogText } ::= { endptResetLog 1 } EndptResetLogEntry ::= SEQUENCE { endptResetLogText DisplayString } endptResetLogText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Syslog event message." ::= { endptResetLogEntry 1 } endptApps OBJECT IDENTIFIER ::= { avaya96xxMIB 4 } endptAUDIOPATH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User audio path. This variable returns 0 if the telephone does not support a 2-way speaker or does not have a headset jack; 1 if the user audio path is with the speakerphone, and 2 if the user audio path is with the headset." ::= { endptApps 1 } endptENHDIALSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Enhanced Local Dialing status. This variable returns 0 if the Enhanced Local Dialing status is off/disabled, else 1." ::= { endptApps 2 } endptSUBSCRIBELIST OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Web push subscription list. This variable returns a string containing one or more fully qualified URLs to which the phone's Browser application subscribes for potential pushed content." ::= { endptApps 3 } endptTPSLIST OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "96xxWeb Trusted Push Server list. This variable returns a string containing one or more domains and paths in DNS format, used to determine for validation of push requests." ::= { endptApps 4 } endptWMLEXCEPT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Web Proxy Server Exception List. This variable returns a string specifying a list of one or more HTTP proxy server Exception domains, separated by commas with no intervening spaces, up to 127 total characters. Used by the 96xx Browser application." ::= { endptApps 5 } endptWMLHOME OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Web application URL. This variable returns a URL of the Home page for the 96xx Browser application." ::= { endptApps 6 } endptWMLIDLETIME OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Web Idle Timer. This variable returns the number of minutes, from 1 to 60 inclusive, of idle activity on the telephone before the Web Idle Timer URI is displayed." ::= { endptApps 7 } endptWMLIDLEURI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Web Idle Timer URI. This variable returns the URI of the WML page displayed after the 96xxWeb Idle Timer expires." ::= { endptApps 8 } endptWMLPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Browser application TCP port. This variable returns an integer specifying the TCP port most recently used for the HTTP proxy server. Used by the 96xx Browser application." ::= { endptApps 9 } endptWMLPROXY OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Web Proxy Server. This variable returns an IP addresses, in dotted-decimal or DNS format, of an HTTP proxy server. Used by the 96xx Browser application." ::= { endptApps 10 } endptGUESTDURATION OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Guest Login Duration. This variable returns an integer specifying the number of hours from 1-12 for the Guest Login duration. The default is 2." ::= { endptApps 11 } endptGUESTLOGINSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Guest Login permission flag. This variable returns 1 if the user is allowed to initiate a Guest Login, otherwise 0." ::= { endptApps 12 } endptGUESTWARNING OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "96xx Guest Login Warning interval. This variable returns an integer specifying the number of minutes from 1-15 before the expiration of a Guest Login that a warnign screen is displayed. The default is 5." ::= { endptApps 13 } endptPUSHCAP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Push capabilities. This variable returns a 4-digit integer specifying the phone administration for audio transmit, audi receive, display (web), and Top Line pushes, respectively. The valid digits are 0 (Disabled), 1 (barge-in onl ypushes of the given type Enabled) and 2 (both barge-in and normal pushes of the given type Enabled). The default is 2222." ::= { endptApps 14 } endptPUSHPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Push listening port. This variable returns an integer specifying the TCP listening port most recently used for the HTTP server.." ::= { endptApps 15 } endptQKLOGINSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Quick Login permission flag. This variable returns 1 (the default) if users are permitted to use the # button to use a previous login and password during registration, else 0." ::= { endptApps 16 } endptSCREENSAVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Custom screen saver URL. This variable returns a filename from 0-32 characters that specifies an image displayed in lieu of the Avaya screen saver." ::= {endptApps 17 } endptWMLSMALL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "9610 Web application URL. This variable returns a URL of the Home page for the 9610 Browser application." ::= { endptApps 18 } endptCLDELCALLBK OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Call Log Callback Deletion flag. This variable returns 1 if a Missed Call Log entry is deleted from the Call Log if the user Calls that entry from the Call Log, else 0 (the default) ." ::= { endptApps 19 } endptFBONCASCREEN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Feature Buttons on Call Appearance List flag. This variable returns 1 if administered feature buttons are allowed to be listed on the Call Appearance Screen, else 0 (the default) ." ::= { endptApps 20 } endptLOGBACKUP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Call Log backup permission flag. This variable returns 1 (the default) if the telephone is to automatically store and retrieve a file of Call Log entries, else 0." ::= { endptApps 21 } endptLOGMISSEDONCE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Missed Call Log Counter flag. This variable returns 1 if the telephone keeps only one Missed Call Log record for a given Name and Number, as well as a counter of Missed calls from that Name and Number, else 0 (the default)." ::= { endptApps 22 } endptLOGUNSEEN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Log redirected calls permission flag. This variable returns 1 if the telephone is to create Call Log entries for calls that are redirected from the physical telephone, else 0 (the default)." ::= { endptApps 23 } endptAPPSTATVALUE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Applications permission status. This variable returns the current value of the APPSTAT parameter, which can restrict the availability of some of the telephone applications, as documented in the 9600 Series Admin Guide." ::= { endptApps 24 } endptOPSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Options permission status. This variable returns the current value of the OPSTAT parameter, which can restrict the availability of some of the telephone options, as documented in the 9600 Series Admin Guide." ::= { endptApps 25} endptOPSTAT2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Options permission override parameter. This variable returns the current value of the OPSTAT2 parameter, which can override specific functionality of the OPSTAT parameter, as documented in the 9600 Series Admin Guide." ::= { endptApps 26 } endptAdjuncts OBJECT IDENTIFIER ::= { avaya96xxMIB 5 } endptBMODS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Button Module interface usage. This variable returns the number of devicess attached (or daisy-chained) to the endpoint through the button module interface." ::= { endptAdjuncts 1} endptBTADHWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bluetooth adapter hardware version. This variable returns the hardware version of an attached Bluetooth Adapter, if any. If none, null is returned." ::= {endptAdjuncts 2} endptBTADSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Bluetooth adapter presence. This variable returns 1 if the presence. of a Bluetooth adapter is detected, else 0." ::= { endptAdjuncts 3} endptBTADSWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bluetooth adapter software version. This variable returns the software version of an attached Bluetooth Adapter, if any. If none, null is returned." ::= {endptAdjuncts 4} endptGIGEHWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GigE adapter hardware version. This variable returns the hardware version of an attached GigE Adapter, if any. If none, null is returned." ::= {endptAdjuncts 5} endptGIGESTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "GigE adapter presence. This variable returns 1 if the presence. of a GigE adapter is detected, else 0." ::= { endptAdjuncts 6} endptGIGESWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GigE adapter software version. This variable returns the software version of an attached GigE Adapter, if any. If none, null is returned." ::= {endptAdjuncts 7} endptSBM1HWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #1 hardware version. This variable returns the hardware version of the first button module, if any. If none, null is returned." ::= {endptAdjuncts 8} endptSBM1SWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #1 software version. This variable returns the software version of the first button module, if any. If none, null is returned." ::= {endptAdjuncts 9} endptSBM2HWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #2 hardware version. This variable returns the hardware version of the second button module, if any. If none, null is returned." ::= {endptAdjuncts 10} endptSBM2SWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #2 software version. This variable returns the software version of the second button module, if any." ::= {endptAdjuncts 11} endptSBM3HWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #3 hardware version. This variable returns the hardware version of the third button module, if any. If none, null is returned." ::= {endptAdjuncts 12} endptSBM3SWVER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SBM #3 software version. This variable returns the software version of the third button module, if any." ::= {endptAdjuncts 13} endptSBMSTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Button Modules attached. This variable returns the number of Button Modules attached (or daisy-chained) to the endpoint." ::= { endptAdjuncts 14} endptUSBPOWER OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "USB Power Provision. This variable returns 0 if the telephone is to disable USB power, 1 if USB power is enabled only if the telephone is Aux powered, 2 if USB power is enabled regardless of the power source, or 3 if USB power is enabled if the telephone is Aux powered or PoE Class 3." ::= { endptAdjuncts 15} endptH323 OBJECT IDENTIFIER ::= { avaya96xxMIB 6 } endptMCIPADD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of call server addresses. This variable returns a sequence of IP addresses, in dotted-decimal or DNS format and separated by commas, of call server IP addresses available for use." ::= { endptH323 1 } endptGKINUSE OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Gatekeeper in use address. This variable returns a 4-octet string specifying the IP address of the gatekeeper currently in use." ::= { endptH323 2 } endptNVPHONEXT OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Endpoint's phone extension. This variable returns a text string identifying the endpoint's extension, in free text format. The default value is NULL. " ::= { endptH323 3 } endptRASGkList OBJECT-TYPE SYNTAX SEQUENCE OF EndptRASGkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the order received." ::= { endptH323 4 } endptRASGkEntry OBJECT-TYPE SYNTAX EndptRASGkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry is one of up to 75 gatekeeper addresses in dotted-decimal or DNS format, as downloaded from the call server during RAS. Entries are listed in the order received." INDEX { endptRASGkEntryData} ::= { endptRASGkList 1 } EndptRASGkEntry ::= SEQUENCE { endptRASGkEntryData DisplayString } endptRASGkEntryData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Data for an individual RAS-provided Gatekeeper." ::= { endptRASGkEntry 1 } endptREREGISTER OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Reregistration Timer value. This variable returns the number of minutes from 1 to 120 inclusive the telephone waits between re-registration attempts if unnamed registration is not in effect. The default is 20 minutes." ::= { endptH323 5 } endptSERVICESTAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Status of phone in service. This variable returns 0 if the phone is not in service nor is attempting to register, 1 if the telephone has failed Gatekeeper Discovery, 2 if the telephone has successfully completed Gatekeeper Discovery but has not successfully completed registration, 3 if the telephone has successfully registered but does not have a TCP connection, and 4 if the telephone is registered and has a TCP connection." ::= { endptH323 6 } endptGKTCPPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gatekeeper Port. This variable returns 0 if the telephone is not currently registered, otherwise it returns the TCP port number on the gatekeeper with which the telephone has a signaling connection established." ::= { endptH323 7 } endptCERT OBJECT IDENTIFIER ::= { avaya96xxMIB 8 } endptMYCERTCAID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate Authority ID. This variable returns the Certificate Authority Identifier to be used in a certificate request." ::= { endptCERT 1 } endptMYCERTCN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate Common Name. This variable returns the Common Name of the Subject of a certificate request." ::= { endptCERT 2 } endptMYCERTDN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate Distinguished Name. This variable returns additional information (sometimes common country and organizational information) that, together with the Common Name, is used to create a Distinguished Name." ::= { endptCERT 3 } endptMYCERTKEYLEN OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Key length. This variable returns the bit length of the public and private keys generated for a certificate request" ::= { endptCERT 4 } endptMYCERTRENEW OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate Renewal interval. This variable returns the percentage of a certificate Validity interval after which renewal procedures will be initiated." ::= { endptCERT 5 } endptMYCERTURL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "SCEP URL. This variable returns the URL to be used to contact an SCEP server." ::= { endptCERT 6 } endptMYCERTWAIT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate wait flag. This variable returns 0 if the telephone will wait until a pending certificate request is complete, else 1 if it will periodically check in the background." ::= { endptCERT 7 } endptVPN OBJECT IDENTIFIER ::= { avaya96xxMIB 9 } endptALWCLRNOTIFY OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "ISAKP Notification flag. This variable returns 1 if unencrypted ISAKMP Notification Payloads will be accepted, else 0." ::= { endptVPN 1 } endptAUTHTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Authentication Method. This variable returns 3 if the VPN authentication method is Pre-Shared Key (PSK); 4 if the method is PSK with XAUTH, 5 if the method is RSA signatures with XAUTH, 6 if the method is Hybrid XAUTH, and 7 if the method is RSA signatures." ::= { endptVPN 2 } endptCFGPROF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Configuration Profile. This variable returns 2 if the VPN Configuration Profile is based on Checkpoint Security Gateway, 3 if the profile is based on Cisco PSK with XAUTH, 5 if the profile is based on Juniper PSK with XAUTH, 6 if the profile is based on Generic PSK, 8 if the profile is based on Cisco Cert. with XAUTH, 9 if the profile is based on Juniper Cert. with XAUTH, or 11 if the profile is based on Nortel Contivity." ::= { endptVPN 3 } endptCOPYTOS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TOS Copy flag. This variable returns 1 if the value of the TOS bits will be copied from the inner IP header to the outer IP header, else this variable returns 2 and the TOS bits of the outer IP header will be set to 0." ::= { endptVPN 4 } endptDHCPSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of DHCP server addresses. This variable returns a sequence of zero or more IP addresses, in dotted-decimal format and separated by commas, of enterprise DHCP servers from which configuration parameters may be requested through a VPN tunnel via a DHCPINFORM message." ::= { endptVPN 5 } endptDROPCLEAR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Clear IPSec packet treatment. This variable returns 1 if received unencrypted (clear) IPsec packets are to be dropped, else 0" ::= { endptVPN 6 } endptENCAPS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Encapsulation Port Numbers. This variable returns 0 if negotiation of NAT traversal is as specified in IETF RFC 3947 (except that IKE negotiation begins with a source port of 2070 and that source port continues to be used unless the source and destination port numbers are changed to 4500, 1 if UDP encapsulation of the inner IP layer will not be provided and negotiation of NAT traversal as specified in IETF RFC 3947 is not supported, 2 if negotiation of NAT traversal is as specified in IETF RFC 3947 (except IKE uses source port 2070 and the source and destination port numbers are not subsequently changed), or 4 if negotiation of NAT traversal is as specified in IETF RFC 3947." ::= { endptVPN 7 } endptEXTDNSSRVR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of external DNS server addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of DNS servers available for use outside of the VPN tunnel when in VPN mode." ::= { endptVPN 8 } endptEXTGIPADD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of external router addresses. This variable returns a sequence of IP addresses, in dotted-decimal format and separated by commas, of routers available for use outside of the VPN tunnel when in VPN mode." ::= { endptVPN 9 } endptEXTIPADD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Endpoint External IP address. This variable returns a 4-octet string specifying the endpoint's current outer IP address when in VPN mode." ::= { endptVPN 10 } endptEXTNETMASK OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "External Subnet mask. This variable returns a 4-octet string specifying the subnet mask to be used outside of the VPN tunnel when in VPN mode." ::= { endptVPN 11 } endptIKECONFIGMODE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Configuration flag. This variable returns 1 if the ISAKMP configuration method to be used, else 2.." ::= { endptVPN 12 } endptIKEDH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use Diffie-Hellman Group for IKE SA. This variable returns the negotiated IKE Phase 1 DH Group number." ::= { endptVPN 13 } endptIKEDHGRP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Proposed Diffie-Hellman Group for IKE SA. This variable returns 1 if the DH Group Description proposed for IKE Phase 1 is the First Oakley Group, 2 if the proposal is for the Second Oakley Group, 5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is for the 2048-bit MODP Group, and 15 if the proposal is for the 3072-bit MODP Group, else 0." ::= { endptVPN 14 } endptIKEID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Phase 1 identity, This variable returns the identity (also known as in XAUTH as group name) used during IKE Phase 1 negotiation." ::= { endptVPN 15 } endptIKEIDTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE SA identification type. This varable returns 1 if the Identification Type used for IKE Phase 1 is ID_IPV4_ADDR, 2 if the ID Type is ID_FQDN, 3 if the ID Type is ID_USER_FQDN, 9 if the ID Type is ID_DER_ASN1_DN, and 11 if the ID Type is ID_KEY_ID." ::= { endptVPN 16 } endptIKEOVERTCP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE TCP usage policy. This variable returns 0 if IKE is only to use UDP, 1 if TCP is to be tried after an IKE times out using UDP, or 2 if only TCP is to be used." ::= { endptVPN 17 } endptIKEP1AUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use IKE Phase 1 authentication algorithm. This variable returns 1 if MD5 was negotiated, and 2 if SHA was negotiated." ::= { endptVPN 18 } endptIKEP1AUTHALG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Proposed IKE Phase 1 authentication algorithm. This variable returns 0 if if either hash algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:." ::= { endptVPN 19 } endptIKEP1ENC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use IKE Phase 1 encryption algorithm. This variable returns 1 if AES-CBC-128 was negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192 was negotiated, or 5 if AES-CBC-256 was negotiated." ::= { endptVPN 20 } endptIKEP1ENCALG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if DES-CBC is proposed, 4 if AES-CBC-192 is proposed, and 5 if AES-CBC-256 is proposed." ::= { endptVPN 21 } endptIKEP1LIFESEC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Security Association lifetime. This variable returns the proposed number of seconds for the SA Life Duration for IKE Phase 1." ::= { endptVPN 22 } endptIKEP2AUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use IKE Phase 2 authentication algorithm. This variable returns 1 if MD5 was negotiated, and 2 if SHA was negotiated." ::= { endptVPN 23 } endptIKEP2AUTHALG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Phase 2 authentication algorithm. This variable returns 0 if either hash algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:." ::= { endptVPN 24 } endptIKEP2ENC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use IKE Phase 2 encryption algorithm. This variable returns 1 if AES-CBC-128 was negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192 was negotiated, 5 if AES-CBC-256 was negotiated, or 6 if NULL encryption was negotiated." ::= { endptVPN 25 } endptIKEP2ENCALG OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if DES-CBC is proposed, 4 if AES-CBC-192 is proposed, 5 if AES-CBC-256 is proposed, and 6 if NULLencryption is proposed." ::= { endptVPN 26 } endptIKEP2LIFESEC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPsec Security Association lifetime. This variable returns the proposed number of seconds for the SA Life Duration for IKE Phase 2." ::= { endptVPN 27 } endptIKESALIFEKB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Security Association KB Lifetime. This variable returns the IKE SA lifetime in kilobytes." ::= { endptVPN 28 } endptIKESALIFESEC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Security Association time Lifetime. This variable returns the IKE SA lifetime in seconds." ::= { endptVPN 29 } endptIKETRANSPORT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use IKE transport protocol. This variable returns 0 if IKE is not in use, 1 if UDP is being used for IKE transport, or 2 if TCP is being used for IKE transport." ::= { endptVPN 30 } endptIKEXCHGMODE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Phase 1 negotiation mode. This variable returns 1 if the IKE Phase 1 exchange usesd is Aggressive Mode, else 2 for Main Mode. " ::= { endptVPN 31 } endptIPSECSALIFEKB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPsec Security Association KB Lifetime. This variable returns the IPsec SA lifetime in kilobytes." ::= { endptVPN 32 } endptIPSECSALIFESEC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPsec Security Association time Lifetime. This variable returns the IPsec SA lifetime in seconds." ::= { endptVPN 33 } endptIPSECSUBNET OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Tunnel IP Address ranges. This variable returns the IP address ranges that will use the VPN tunnel, with 0.0.0.0/0 meaning all IP addresses." ::= { endptVPN 34 } endptNORTELAUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Nortel gateway authentication method. If Nortel gateway user authentication is to be used, this variable returns 1 if a local username and password are to be used; 2 if a RADIUS username and password are to be used, 3 if RADIUS SecurID is to be used, and 4 if RADIUS Axent is to be used.." ::= { endptVPN 35 } endptPFSDH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "In-Use Diffie-Hellman Group for IPsec SA. This variable returns the negotiated IKE PFS DH Group number." ::= { endptVPN 36 } endptPFSDHGRP OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Diffie-Hellman Group for IPsec SA. This variable returns 1 if the DH Group Description proposed for IPSec SA is the First Oakley Group, 2 if the proposal is for the Second Oakley Group, 5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is for the 2048-bit MODP Group, and 15 if the proposal is for the 3072-bit MODP Group, else 0." ::= { endptVPN 37 } endptPSWDTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Password Permissions. This variable returns 1 if the password may be alphanumeric and is to be stored in non-volatile memory as the value of NVVPNPSWD, 2 if the password may be alphanumeric and is to be stored in volatile memory that will be cleared when the telephone resets, 3 if the password may be numeric-only and is to be stored in volatile memory that will be cleared mmediately after the first time the password is used (this is for use with numeric-only one-time token devices), 4 if the password may be alphanumeric and is to be stored in volatile memory that will be cleared immediately after the first time the password is used, and 5 if the password may be alphanumeric and is to be stored in volatile memory that is cleared when the user invokes VPN Sleep Mode and when the telephone resets." ::= { endptVPN 38 } endptSGINUSE OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Security Gateway address. This variable returns a 4-octet string specifying the IP address of the VPN Security Gateway in use, else 0.0.0.0." ::= { endptVPN 39 } endptSGIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Security Gateway list. This variable returns the list of VPN security gateway IP addresses available to the telephone." ::= { endptVPN 40} endptSGVENDOR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Security Gateway Vendor. This variable returns 1 if the IKE implementation matches Juniper/NetScreen, 2 if it matches Cisco, 3 if it matches Check Point/Nokia, 5 if it matches Nortel, otherwise 4." ::= { endptVPN 41 } endptSGVERSION OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Security Gateway Version. This variable returns the version information, if any, of the Security Gateway with wich the telephone has a VPN tunnel established, else NULL." ::= { endptVPN 42 } endptVPNMODE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN Support Specification. This variable returns 1 if VPN functionality is enabled, else 0." ::= { endptVPN 43 } endptVPNUSER OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VPN User Name. This variable returns the user name to be used during authentication. " ::= { endptVPN 44 } endptVPNUSERTYPE OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VPN User Name Permissions. This variable returns 1 if the user can change the VPN username, else 0." ::= { endptVPN 45 } endptXAUTH OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "XAUTH status. This variable returns 2 if XAUTH is disabled, else 1." ::= { endptVPN 46 } END