-- Ascend mibshdslstat MIB -- -- Ascend Communications, Inc -- 1275 Harbor Bay Pkwy -- Alameda, CA 94502 -- +1 510 769 6001 -- info@ascend.com -- -- Copyright (c) 1993-1999 Ascend Communications, Inc. -- All rights reserved. -- -- Do not edit this file directly. -- It is generated automatically by mibgen for use with -- TAOS version 10.0.1 or newer. -- ASCEND-MIBSHDSLSTAT-MIB DEFINITIONS ::= BEGIN IMPORTS configuration FROM ASCEND-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- If any of the MIB compilers have problems with the DisplayString -- or PhysAddress, uncomment the next two lines. DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING mibshdslDslLineStatus OBJECT IDENTIFIER ::= { configuration 157} -- The mibshdslDslLineStatus table -- -- This table contains parameters for the mibshdslDslLineStatus profile -- mibshdslDslLineStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MibshdslDslLineStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibshdslDslLineStatus profile entries." ::= { mibshdslDslLineStatus 1 } mibshdslDslLineStatusEntry OBJECT-TYPE SYNTAX MibshdslDslLineStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile." INDEX { shdslDslLineStatus-Shelf-o, shdslDslLineStatus-Slot-o, shdslDslLineStatus-Item-o } ::= { mibshdslDslLineStatusTable 1 } MibshdslDslLineStatusEntry ::= SEQUENCE { shdslDslLineStatus-Shelf-o INTEGER, shdslDslLineStatus-Slot-o INTEGER, shdslDslLineStatus-Item-o INTEGER, shdslDslLineStatus-PhysicalAddress-Shelf INTEGER, shdslDslLineStatus-PhysicalAddress-Slot INTEGER, shdslDslLineStatus-PhysicalAddress-ItemNumber INTEGER, shdslDslLineStatus-LineState INTEGER, shdslDslLineStatus-SparePhysicalAddress-Shelf INTEGER, shdslDslLineStatus-SparePhysicalAddress-Slot INTEGER, shdslDslLineStatus-SparePhysicalAddress-ItemNumber INTEGER, shdslDslLineStatus-SparingState INTEGER, shdslDslLineStatus-SparingChangeReason INTEGER, shdslDslLineStatus-SparingChangeTime INTEGER, shdslDslLineStatus-SparingChangeCounter INTEGER, shdslDslLineStatus-VpiVciRange INTEGER, shdslDslLineStatus-VpSwitchingVpi INTEGER, shdslDslLineStatus-PhysicalStatus-IfGroupIndex INTEGER, shdslDslLineStatus-PhysicalStatus-UnitType INTEGER, shdslDslLineStatus-PhysicalStatus-InterfaceType INTEGER, shdslDslLineStatus-PhysicalStatus-DevLineState INTEGER, shdslDslLineStatus-PhysicalStatus-OperationalRate INTEGER, shdslDslLineStatus-PhysicalStatus-FirmwareVer DisplayString, shdslDslLineStatus-PhysicalStatus-HardwareVer INTEGER, shdslDslLineStatus-PhysicalStatus-NetworkType INTEGER, shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days INTEGER, shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours INTEGER, shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes INTEGER, shdslDslLineStatus-PhysicalStatistic-RxSignalPresent INTEGER, shdslDslLineStatus-PhysicalStatistic-LineQuality INTEGER, shdslDslLineStatus-PhysicalStatistic-UpDwnCntr INTEGER, shdslDslLineStatus-PhysicalStatistic-SelfTest INTEGER, shdslDslLineStatus-PhysicalStatistic-TransmitPower INTEGER, shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus INTEGER, shdslDslLineStatus-PhysicalStatistic-CodeViolations INTEGER, shdslDslLineStatus-PhysicalStatistic-ErroredSecond INTEGER, shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond INTEGER, shdslDslLineStatus-PhysicalStatistic-LoswSecond INTEGER, shdslDslLineStatus-PhysicalStatistic-UnavailableSecond INTEGER, shdslDslLineStatus-PhysicalStatistic-LoopAttenuation INTEGER, shdslDslLineStatus-PhysicalStatistic-Snr INTEGER, shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation INTEGER, shdslDslLineStatus-PhysicalStatistic-SturSnr INTEGER, shdslDslLineStatus-Action-o INTEGER } shdslDslLineStatus-Shelf-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibshdslDslLineStatusEntry 1 } shdslDslLineStatus-Slot-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibshdslDslLineStatusEntry 2 } shdslDslLineStatus-Item-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibshdslDslLineStatusEntry 3 } shdslDslLineStatus-PhysicalAddress-Shelf OBJECT-TYPE SYNTAX INTEGER { anyShelf (1), shelf1 (2), shelf2 (3), shelf3 (4), shelf4 (5), shelf5 (6), shelf6 (7), shelf7 (8), shelf8 (9), shelf9 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the shelf that the addressed physical device resides on." ::= { mibshdslDslLineStatusEntry 4 } shdslDslLineStatus-PhysicalAddress-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibshdslDslLineStatusEntry 5 } shdslDslLineStatus-PhysicalAddress-ItemNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable entity within the context of shelf and slot." ::= { mibshdslDslLineStatusEntry 6 } shdslDslLineStatus-LineState OBJECT-TYPE SYNTAX INTEGER { doesNotExist (1), disabled (2), active (3) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall state of the line." ::= { mibshdslDslLineStatusEntry 7 } shdslDslLineStatus-SparePhysicalAddress-Shelf OBJECT-TYPE SYNTAX INTEGER { anyShelf (1), shelf1 (2), shelf2 (3), shelf3 (4), shelf4 (5), shelf5 (6), shelf6 (7), shelf7 (8), shelf8 (9), shelf9 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the shelf that the addressed physical device resides on." ::= { mibshdslDslLineStatusEntry 8 } shdslDslLineStatus-SparePhysicalAddress-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibshdslDslLineStatusEntry 9 } shdslDslLineStatus-SparePhysicalAddress-ItemNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable entity within the context of shelf and slot." ::= { mibshdslDslLineStatusEntry 10 } shdslDslLineStatus-SparingState OBJECT-TYPE SYNTAX INTEGER { sparingNone (1), primaryActive (2), primaryInactive (3), secondaryActive (4), secondaryInactive (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The sparing state of the line." ::= { mibshdslDslLineStatusEntry 11 } shdslDslLineStatus-SparingChangeReason OBJECT-TYPE SYNTAX INTEGER { unknown (1), manual (2), automatic (3), test (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The reson for the last sparing state change." ::= { mibshdslDslLineStatusEntry 12 } shdslDslLineStatus-SparingChangeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The time of the last sparing state change." ::= { mibshdslDslLineStatusEntry 13 } shdslDslLineStatus-SparingChangeCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of sparing state changes." ::= { mibshdslDslLineStatusEntry 14 } shdslDslLineStatus-VpiVciRange OBJECT-TYPE SYNTAX INTEGER { vpi01Vci321023 (6), vpi03Vci32511 (1), vpi07Vci32255 (2), vpi015Vci32127 (3), vpi031Vci3263 (4), notApplicable (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot." ::= { mibshdslDslLineStatusEntry 15 } shdslDslLineStatus-VpSwitchingVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching." ::= { mibshdslDslLineStatusEntry 16 } shdslDslLineStatus-PhysicalStatus-IfGroupIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface groups index assigned to this physical port." ::= { mibshdslDslLineStatusEntry 17 } shdslDslLineStatus-PhysicalStatus-UnitType OBJECT-TYPE SYNTAX INTEGER { coe (1), cpe (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Unit types defines if the node is operating Central Office or Customer Premise equipment software." ::= { mibshdslDslLineStatusEntry 18 } shdslDslLineStatus-PhysicalStatus-InterfaceType OBJECT-TYPE SYNTAX INTEGER { default (1), gShdsl (2), hdsl2 (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface type defines if the node is operating on SHDSL or GSHDSL" ::= { mibshdslDslLineStatusEntry 19 } shdslDslLineStatus-PhysicalStatus-DevLineState OBJECT-TYPE SYNTAX INTEGER { portUp (2), test (3), startupHandshake (4), startupTraining (5), startupDownload (6), idle (7), down (8), outOfService (9), unknown (10), analogLoopback (11), digitalLoopback (12) } ACCESS read-only STATUS mandatory DESCRIPTION "Display of current interface state." ::= { mibshdslDslLineStatusEntry 20 } shdslDslLineStatus-PhysicalStatus-OperationalRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Operational up and down stream rate. Zero means unknown." ::= { mibshdslDslLineStatusEntry 21 } shdslDslLineStatus-PhysicalStatus-FirmwareVer OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware version ID." ::= { mibshdslDslLineStatusEntry 22 } shdslDslLineStatus-PhysicalStatus-HardwareVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hardware chip version." ::= { mibshdslDslLineStatusEntry 23 } shdslDslLineStatus-PhysicalStatus-NetworkType OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Current Standard Network type. Either Annex A, Annex B or Annex B ANFP." ::= { mibshdslDslLineStatusEntry 43 } shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Days OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of days that the DSL line has been up." ::= { mibshdslDslLineStatusEntry 24 } shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Hours OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of hours that the DSL line has been up." ::= { mibshdslDslLineStatusEntry 25 } shdslDslLineStatus-PhysicalStatistic-LineUpTimer-Minutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of minutes that the DSL line has been up." ::= { mibshdslDslLineStatusEntry 26 } shdslDslLineStatus-PhysicalStatistic-RxSignalPresent OBJECT-TYPE SYNTAX INTEGER { yes (3), no (2) } ACCESS read-only STATUS mandatory DESCRIPTION "State if the receive signal is present or not." ::= { mibshdslDslLineStatusEntry 27 } shdslDslLineStatus-PhysicalStatistic-LineQuality OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "While the port is in the up state, this parameter displays the line quality." ::= { mibshdslDslLineStatusEntry 28 } shdslDslLineStatus-PhysicalStatistic-UpDwnCntr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface Up Down counter value displays the number of times the interface trasitions from a down to up state." ::= { mibshdslDslLineStatusEntry 29 } shdslDslLineStatus-PhysicalStatistic-SelfTest OBJECT-TYPE SYNTAX INTEGER { passed (1), selfTestFailed (2), localLoopBackFailed (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Hardware/firmware self test results." ::= { mibshdslDslLineStatusEntry 30 } shdslDslLineStatus-PhysicalStatistic-TransmitPower OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Transmit power in DB." ::= { mibshdslDslLineStatusEntry 31 } shdslDslLineStatus-PhysicalStatistic-FramerSyncStatus OBJECT-TYPE SYNTAX INTEGER { inSync (2), outOfSync (1) } ACCESS read-only STATUS mandatory DESCRIPTION "Framer sync status" ::= { mibshdslDslLineStatusEntry 32 } shdslDslLineStatus-PhysicalStatistic-CodeViolations OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line is defined as a count of SHDSL CRC anomalies occuring during the accumuation period." ::= { mibshdslDslLineStatusEntry 33 } shdslDslLineStatus-PhysicalStatistic-ErroredSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared." ::= { mibshdslDslLineStatusEntry 34 } shdslDslLineStatus-PhysicalStatistic-SeverelyErroredSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared." ::= { mibshdslDslLineStatusEntry 35 } shdslDslLineStatus-PhysicalStatistic-LoswSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared." ::= { mibshdslDslLineStatusEntry 36 } shdslDslLineStatus-PhysicalStatistic-UnavailableSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Line is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the SHDSL line becomes available at the onset of 10 contiguous seconds with no SES-L's." ::= { mibshdslDslLineStatusEntry 37 } shdslDslLineStatus-PhysicalStatistic-LoopAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current loop attenuation in DB. " ::= { mibshdslDslLineStatusEntry 38 } shdslDslLineStatus-PhysicalStatistic-Snr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "While the port is in the up state, this parameter displays the Signal to Noise Ratio." ::= { mibshdslDslLineStatusEntry 40 } shdslDslLineStatus-PhysicalStatistic-SturLoopAttenuation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current loop attenuation in DB from the STU-R. " ::= { mibshdslDslLineStatusEntry 41 } shdslDslLineStatus-PhysicalStatistic-SturSnr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R." ::= { mibshdslDslLineStatusEntry 42 } shdslDslLineStatus-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibshdslDslLineStatusEntry 39 } END