-- Ascend mibatmp MIB -- -- Ascend Communications, Inc -- 1275 Harbor Bay Pkwy -- Alameda, CA 94502 -- +1 510 769 6001 -- info@ascend.com -- -- Copyright (c) 1993-1999 Ascend Communications, Inc. -- All rights reserved. -- -- Do not edit this file directly. -- It is generated automatically by mibgen for use with -- TAOS version 10.0.1 or newer. -- ASCEND-MIBATMP-MIB DEFINITIONS ::= BEGIN IMPORTS configuration FROM ASCEND-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- If any of the MIB compilers have problems with the DisplayString -- or PhysAddress, uncomment the next two lines. DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING mibatmpProfile OBJECT IDENTIFIER ::= { configuration 42} -- The mibatmpProfile table -- -- This table contains parameters for the mibatmpProfile profile -- mibatmpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF MibatmpProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibatmpProfile profile entries." ::= { mibatmpProfile 1 } mibatmpProfileEntry OBJECT-TYPE SYNTAX MibatmpProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibatmpProfile entry containing objects that maps to the parameters of mibatmpProfile profile." INDEX { atmpProfile-Index-o } ::= { mibatmpProfileTable 1 } MibatmpProfileEntry ::= SEQUENCE { atmpProfile-Index-o INTEGER, atmpProfile-AgentMode INTEGER, atmpProfile-AgentType INTEGER, atmpProfile-UdpPort INTEGER, atmpProfile-HomeAgentPassword DisplayString, atmpProfile-AtmpSapReply INTEGER, atmpProfile-RetryTimeout INTEGER, atmpProfile-RetryLimit INTEGER, atmpProfile-IdleTimer INTEGER, atmpProfile-MtuLimit INTEGER, atmpProfile-ForceFragmentation INTEGER, atmpProfile-AtmpSnmpTrap INTEGER, atmpProfile-Action-o INTEGER } atmpProfile-Index-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibatmpProfileEntry 1 } atmpProfile-AgentMode OBJECT-TYPE SYNTAX INTEGER { tunnelDisabled (1), homeAgent (2), foreignAgent (3), homeAndForeignAgent (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The valid modes for this ATMP agent." ::= { mibatmpProfileEntry 2 } atmpProfile-AgentType OBJECT-TYPE SYNTAX INTEGER { routerHomeAgent (1), gatewayHomeAgent (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of Home Agent." ::= { mibatmpProfileEntry 3 } atmpProfile-UdpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "UDP port number to use locally." ::= { mibatmpProfileEntry 4 } atmpProfile-HomeAgentPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The password required to access this home agent." ::= { mibatmpProfileEntry 5 } atmpProfile-AtmpSapReply OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether an ATMP Home Agent should reply to IPX SAP Nearest Server queries from the Mobile Client." ::= { mibatmpProfileEntry 6 } atmpProfile-RetryTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between retries to establish a tunnel." ::= { mibatmpProfileEntry 7 } atmpProfile-RetryLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of failed attempts to establish a tunnel before switching to the alternate home agent." ::= { mibatmpProfileEntry 8 } atmpProfile-IdleTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of minutes of no activity before an ATMP Home Agent will drop a tunnel. The value 0 disables the idle timer." ::= { mibatmpProfileEntry 9 } atmpProfile-MtuLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum IP packet size that can be transmitted to a remote agent without performing pre-fragmentation. The value 0 disables this feature. If enabled, the smallest size the system will use is 68, even if a smaller size is specified. This is to comply with the minimum IP packet size requirement per RFC 791." ::= { mibatmpProfileEntry 10 } atmpProfile-ForceFragmentation OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to NO, an ICMP message will be sent if a frame needs fragmentation and the DF bit is set. This is the standard behavior. When set to YES, it forces pre-fragmentation of large IP frames before they are sent to the remote agent, even if the frame has the DF bit set. This behavior is not standard and prevents MTU discovery mechanisms." ::= { mibatmpProfileEntry 11 } atmpProfile-AtmpSnmpTrap OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to No, do not send ATMP SNMP traps. If Yes, send traps. The default is No." ::= { mibatmpProfileEntry 12 } atmpProfile-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibatmpProfileEntry 13 } END