-------------------------------------------------------------------------------- -- ACMEPACKET-SWINVENTORY-MIB: Acme Packet software inventory MIB file -- -- October 2004 -- -- Copyright (c) by Acme Packet, Inc. -- All rights reserved. -------------------------------------------------------------------------------- -- This MIB provides a means to gather software inventory information generated -- by Acme Packet Session Router and Session Director -- APSWINVENTORY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF acmepacketMgmt FROM ACMEPACKET-SMI; apSwInventoryModule MODULE-IDENTITY LAST-UPDATED "0410181000Z" ORGANIZATION "Acme Packet, Inc" CONTACT-INFO " Customer Service Postal: Acme Packet, Inc 71 Third Avenue Burlington, MA 01803 US Tel: 1-781-328-4400 E-mail: support@acmepacket.com" DESCRIPTION " The software inventory MIB for Acme Packet" ::= { acmepacketMgmt 4 } apSwInventoryMIBObjects OBJECT IDENTIFIER ::= { apSwInventoryModule 1 } apSwInventoryBootObjects OBJECT IDENTIFIER ::= { apSwInventoryMIBObjects 1 } apSwInventoryCfgObjects OBJECT IDENTIFIER ::= { apSwInventoryMIBObjects 2 } -- software inventory Group apSwBootTable OBJECT-TYPE SYNTAX SEQUENCE OF ApSwBootEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of booting software inventory" ::= { apSwInventoryBootObjects 1 } apSwBootEntry OBJECT-TYPE SYNTAX ApSwBootEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the software inventory table" INDEX { apSwBootIndex } ::= { apSwBootTable 1} ApSwBootEntry ::= SEQUENCE { apSwBootIndex Integer32 (1..2147483647), apSwBootDescr DisplayString, apSwBootType INTEGER, apSwBootStatus INTEGER } apSwBootIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the software inventory table. Index always begins at 1, and increases by 1. The table length depends on the size of software inventory. The index is not associated with any specific inventory entry" ::= { apSwBootEntry 1 } apSwBootDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the software image. It maybe file name, data and time this image was built, or the unique identifier of this software. Examples are: 1. boot image: 10.0.1.12/sd121p3.gz for host address is 10.0.1.12, and image name is sd121p3.gz 2. boot image: /tffs0/sd121p3.gz for boot from flash 0, and image name is sd121p3.gz 3. boot loader: bank0:03/18/2004 10:58:25 for boot from bank 0, and version is 'march 18 2003, 10:58:25' 4. boot loader: :" ::= { apSwBootEntry 2 } apSwBootType OBJECT-TYPE SYNTAX INTEGER { bootImage(1), bootLoader (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The software entity type" ::= { apSwBootEntry 3 } apSwBootStatus OBJECT-TYPE SYNTAX INTEGER { currentUsing(1), previousUsed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The software entity status" ::= { apSwBootEntry 4 } -- configuration MIBs apSwCfgCurrentVersion OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current version of saved configuration" ::= { apSwInventoryCfgObjects 1 } apSwCfgRunningVersion OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "current version of running configuration" ::= { apSwInventoryCfgObjects 2 } apSwCfgBackuptable OBJECT-TYPE SYNTAX SEQUENCE OF ApSwCfgBackupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of backup configuration files" ::= { apSwInventoryCfgObjects 3 } apSwCfgBackupEntry OBJECT-TYPE SYNTAX ApSwCfgBackupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the backup configuration files table" INDEX { apSwCfgBackupIndex } ::= { apSwCfgBackuptable 1} ApSwCfgBackupEntry ::= SEQUENCE { apSwCfgBackupIndex Integer32 (1..2147483647), apSwCfgBackupName DisplayString } apSwCfgBackupIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index for the backup configuration files table. Index always begins at 1, and increases by 1. The table length depends on the size of backup configuration. The index is not associated with any specific entry" ::= { apSwCfgBackupEntry 1 } apSwCfgBackupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of the condifuration file name. Examples are: p1604, 063004-cfg" ::= { apSwCfgBackupEntry 2 } -- Notification MIBs apSwInventoryNotificationObjects OBJECT IDENTIFIER ::= { apSwInventoryModule 2 } apSwCfgNotificationObjects OBJECT IDENTIFIER ::= { apSwInventoryNotificationObjects 1} apSwCfgTrapPreviousVersion OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The previous version before this trap happened" ::= { apSwCfgNotificationObjects 1} apSwCfgTrapCurrentVersion OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current version after this trap happened" ::= { apSwCfgNotificationObjects 2} -- Notifications apSwInventoryNotificationPrefix OBJECT IDENTIFIER ::= { apSwInventoryModule 3 } apSwInventoryNotifications OBJECT IDENTIFIER ::= { apSwInventoryNotificationPrefix 0 } apSwCfgActivateNotification NOTIFICATION-TYPE OBJECTS { apSwCfgTrapPreviousVersion, apSwCfgTrapCurrentVersion } STATUS current DESCRIPTION "This trap is sent if is issued and configration has been changed at runnign time" ::= { apSwInventoryNotifications 1 } -- conformance information apSwInventoryConformance OBJECT IDENTIFIER ::= { apSwInventoryModule 4 } apSwInventoryCompliances OBJECT IDENTIFIER ::= { apSwInventoryConformance 1 } apSwInventoryGroups OBJECT IDENTIFIER ::= { apSwInventoryConformance 2 } apSwInventoryNotificationsGroups OBJECT IDENTIFIER ::= { apSwInventoryConformance 3 } -- compliance statements -- units of conformance apSwBootObjectsGroup OBJECT-GROUP OBJECTS { apSwBootDescr, apSwBootType, apSwBootStatus } STATUS current DESCRIPTION "A collection of objects providing the software booting inventory" ::= { apSwInventoryGroups 1 } apSwCfgObjectsGroup OBJECT-GROUP OBJECTS { apSwCfgCurrentVersion, apSwCfgRunningVersion, apSwCfgBackupName } STATUS current DESCRIPTION "A collection of objects providing the configuraion files" ::= { apSwInventoryGroups 2 } -- notifications groups apSwInventoryNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { apSwCfgActivateNotification } STATUS current DESCRIPTION "A collection of notifications providing the change for software inventory." ::= { apSwInventoryNotificationsGroups 1 } END