-- *------------------------------------------------------------------ -- * ALTIGA-SEP-STATS-MIB.my: Cisco VPN3000 Series SEP Statistics MIB. -- * -- * Altiga Networks was acquired by Cisco Systems on March 29, 2000 -- * -- * Copyright (c) 2002, 2003 by Cisco Systems, Inc. -- * All rights reserved. -- * -- *------------------------------------------------------------------ ALTIGA-SEP-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF alStatsSep, alSepGroup FROM ALTIGA-MIB alSepMibModule FROM ALTIGA-GLOBAL-REG; altigaSepStatsMibModule MODULE-IDENTITY LAST-UPDATED "200303270000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cvpn3000@cisco.com" DESCRIPTION "The Cisco VPN 3000 Series SEP Statistics MIB models counters and objects that are of management interest for the SEP hardware. Acronyms The following acronyms are used in this document: MIB: Management Information Base RSA: Rivest, Shamir, and Adelman SEP: Scalable Encryption Processor " REVISION "200303270000Z" DESCRIPTION "Added new enum value to alSepModuleStatsType and alSepModuleStatsState." REVISION "200209051300Z" DESCRIPTION "Added module compliance." REVISION "200207100000Z" DESCRIPTION "Updated with new header" ::= { alSepMibModule 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- per SEP statistics alSepModuleStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AlSepModuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of SEPs modules found." ::= { alStatsSep 2 } alSepModuleStatsEntry OBJECT-TYPE SYNTAX AlSepModuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alSepModuleStatsTable." INDEX { alSepModuleStatsSlotNum } ::= { alSepModuleStatsTable 1 } AlSepModuleStatsEntry ::= SEQUENCE { alSepModuleStatsRowStatus RowStatus, alSepModuleStatsSlotNum INTEGER, alSepModuleStatsType INTEGER, alSepModuleStatsState INTEGER, alSepModuleStatsDspCodeVersion DisplayString, alSepModuleStatsHashOutboundPackets Counter32, alSepModuleStatsHashOutboundOctets Counter32, alSepModuleStatsHashInboundPackets Counter32, alSepModuleStatsHashInboundOctets Counter32, alSepModuleStatsEncPackets Counter32, alSepModuleStatsEncOctets Counter32, alSepModuleStatsDecPackets Counter32, alSepModuleStatsDecOctets Counter32, alSepModuleStatsHashEncPackets Counter32, alSepModuleStatsHashDecPackets Counter32, alSepModuleStatsCryptoTransformsTotal Counter32, alSepModuleStatsPacketDrops Counter32, alSepModuleStatsRandRequests Counter32, alSepModuleStatsRandReplens Counter32, alSepModuleStatsRandBytesAvail Integer32, alSepModuleStatsRandCacheEmpty Counter32, alSepModuleStatsDHKeysGenerated Counter32, alSepModuleStatsDHDerivedSecretKeys Counter32, alSepModuleStatsRSASignings Counter32, alSepModuleStatsRSAVerifications Counter32, alSepModuleStatsRSAEncPackets Counter32, alSepModuleStatsRSAEncOctets Counter32, alSepModuleStatsRSADecPackets Counter32, alSepModuleStatsRSADecOctets Counter32, alSepModuleStatsDSAKeysGenerated Counter32, alSepModuleStatsDSASignings Counter32, alSepModuleStatsDSAVerifications Counter32, alSepModuleStatsRSAKeysGenerated Counter32 } alSepModuleStatsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row." ::= { alSepModuleStatsEntry 1 } alSepModuleStatsSlotNum OBJECT-TYPE SYNTAX INTEGER(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The physical slot this SEP is connected to." ::= { alSepModuleStatsEntry 2 } alSepModuleStatsType OBJECT-TYPE SYNTAX INTEGER { cryptSet(1), cryptIc(2), bcm582x(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of HW engine used to perform the cryptographic transforms. cryptSet: First generation of Hardware Cryptographic Processor. cryptIc: Cryptographic Integrated Circuit. bcm582x: BroadCom 582x series Hardware Cryptographic Products. " ::= { alSepModuleStatsEntry 3 } alSepModuleStatsState OBJECT-TYPE SYNTAX INTEGER { sepNotFound(1), sepFound(2), sepDiagFailure(3), sepNotOperational(4), sepLoading(5), sepInitializing(6), sepOperational(7), sepDisabled(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The functional state of this SEP. sepNotFound: SEP is not found. sepFound: SEP is found. sepDiagFailure: SEP dialog fail. sepNotOperational: SEP is not operational. sepLoading: SEP is loading data. sepInitializing: SEP is initializing. sepOperational: SEP is operational. sepDisabled: SEP is disabled. " ::= { alSepModuleStatsEntry 4 } alSepModuleStatsDspCodeVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The version of DSP microcode running on this SEP." ::= { alSepModuleStatsEntry 5 } alSepModuleStatsHashOutboundPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound authentication-only packets processed by this SEP." ::= { alSepModuleStatsEntry 6 } alSepModuleStatsHashOutboundOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound octets authenticated by this SEP." ::= { alSepModuleStatsEntry 7 } alSepModuleStatsHashInboundPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound authentication-only packets processed by this SEP." ::= { alSepModuleStatsEntry 8 } alSepModuleStatsHashInboundOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound octets authenticated by this SEP." ::= { alSepModuleStatsEntry 9 } alSepModuleStatsEncPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound encryption-only packets processed by this SEP." ::= { alSepModuleStatsEntry 10 } alSepModuleStatsEncOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound octets encrypted by this SEP." ::= { alSepModuleStatsEntry 11 } alSepModuleStatsDecPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound decryption-only packets processed by this SEP." ::= { alSepModuleStatsEntry 12 } alSepModuleStatsDecOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound octets decrypted by this SEP." ::= { alSepModuleStatsEntry 13 } alSepModuleStatsHashEncPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of combined outbound hash/encrypt packets processed by this SEP." ::= { alSepModuleStatsEntry 14 } alSepModuleStatsHashDecPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of combined inbound hash/decrypt packets processed by this SEP." ::= { alSepModuleStatsEntry 15 } alSepModuleStatsCryptoTransformsTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of hash, encryption, decryption, hash/encrypt, and hash/decrypt transforms performed by this SEP." ::= { alSepModuleStatsEntry 16 } alSepModuleStatsPacketDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets intended for SEP processing, dropped due to the SEP ring being full." ::= { alSepModuleStatsEntry 17 } alSepModuleStatsRandRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of random # requests made to the SEP." ::= { alSepModuleStatsEntry 18 } alSepModuleStatsRandReplens OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of random # requests fulfilled by the SEP." ::= { alSepModuleStatsEntry 19 } alSepModuleStatsRandBytesAvail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of random bytes currently cached on the Host." ::= { alSepModuleStatsEntry 20 } alSepModuleStatsRandCacheEmpty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a random # request came in and we had no SEP generated random #'s available on the host." ::= { alSepModuleStatsEntry 21 } alSepModuleStatsDHKeysGenerated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new Diffie Hellman key pair has been generated by a SEP." ::= { alSepModuleStatsEntry 22 } alSepModuleStatsDHDerivedSecretKeys OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a SEP has derived the Diffie Hellman secret key." ::= { alSepModuleStatsEntry 23 } alSepModuleStatsRSASignings OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an RSA Digital Signature has been generated by a SEP." ::= { alSepModuleStatsEntry 24 } alSepModuleStatsRSAVerifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an RSA Digital Signature has been verified by a SEP." ::= { alSepModuleStatsEntry 25 } alSepModuleStatsRSAEncPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets RSA-encrypted by this SEP." ::= { alSepModuleStatsEntry 26 } alSepModuleStatsRSAEncOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets RSA-encrypted by this SEP." ::= { alSepModuleStatsEntry 27 } alSepModuleStatsRSADecPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets RSA-decrypted by this SEP." ::= { alSepModuleStatsEntry 28 } alSepModuleStatsRSADecOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets RSA-decrypted by this SEP." ::= { alSepModuleStatsEntry 29 } alSepModuleStatsDSAKeysGenerated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new DSA Key pair has been generated by a SEP." ::= { alSepModuleStatsEntry 30 } alSepModuleStatsDSASignings OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a DSA Digital Signature has been generated by a SEP." ::= { alSepModuleStatsEntry 31 } alSepModuleStatsDSAVerifications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a DSA Digital Signature has been verified by a SEP." ::= { alSepModuleStatsEntry 32 } alSepModuleStatsRSAKeysGenerated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a new RSA Key pair has been generated by a SEP." ::= { alSepModuleStatsEntry 33 } altigaSepStatsMibConformance OBJECT IDENTIFIER ::= { altigaSepStatsMibModule 1 } altigaSepStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSepStatsMibConformance 1 } altigaSepStatsMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents which implement the Altiga SEP Statistics MIB." MODULE MANDATORY-GROUPS { altigaSepStatsGroup } ::= { altigaSepStatsMibCompliances 1 } altigaSepStatsGroup OBJECT-GROUP OBJECTS { alSepModuleStatsRowStatus, alSepModuleStatsType, alSepModuleStatsState, alSepModuleStatsDspCodeVersion, alSepModuleStatsHashOutboundPackets, alSepModuleStatsHashOutboundOctets, alSepModuleStatsHashInboundPackets, alSepModuleStatsHashInboundOctets, alSepModuleStatsEncPackets, alSepModuleStatsEncOctets, alSepModuleStatsDecPackets, alSepModuleStatsDecOctets, alSepModuleStatsHashEncPackets, alSepModuleStatsHashDecPackets, alSepModuleStatsCryptoTransformsTotal, alSepModuleStatsPacketDrops, alSepModuleStatsRandRequests, alSepModuleStatsRandReplens, alSepModuleStatsRandBytesAvail, alSepModuleStatsRandCacheEmpty, alSepModuleStatsDHKeysGenerated, alSepModuleStatsDHDerivedSecretKeys, alSepModuleStatsRSASignings, alSepModuleStatsRSAVerifications, alSepModuleStatsRSAEncPackets, alSepModuleStatsRSAEncOctets, alSepModuleStatsRSADecPackets, alSepModuleStatsRSADecOctets, alSepModuleStatsDSAKeysGenerated, alSepModuleStatsDSASignings, alSepModuleStatsDSAVerifications, alSepModuleStatsRSAKeysGenerated } STATUS current DESCRIPTION "The objects for the SEP Module statistics." ::= { alSepGroup 2 } END