ALCATEL-IND1-VLAN-MGR-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF softentIND1VlanMgt FROM ALCATEL-IND1-BASE; alcatelIND1VLANMgrMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Vlan Manager for the distribution of vlan configuration information, including the association between vlans and ports. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= { softentIND1VlanMgt 1} -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx IpxNetworkAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "Textual convention for ipx network address. This is an unsigned integer (32 bits) that should be represented as a hexedecimal value." SYNTAX Unsigned32 -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1VLANMgrMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Manager Subsystem Managed Objects." ::= { alcatelIND1VLANMgrMIB 1 } alcatelIND1VLANMgrMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Manager Subsystem Conformance Information." ::= { alcatelIND1VLANMgrMIB 2 } alcatelIND1VLANMgrMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Manager Subsystem Units Of Conformance." ::= { alcatelIND1VLANMgrMIBConformance 1 } alcatelIND1VLANMgrMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For VLAN Manager Subsystem Compliance Statements." ::= { alcatelIND1VLANMgrMIBConformance 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanMgrVlan OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Virtual LAN instances in this device." ::= { vlanMgrVlan 1 } vlanEntry OBJECT-TYPE SYNTAX VlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VLAN entry." INDEX { vlanNumber } ::= { vlanTable 1 } VlanEntry ::= SEQUENCE { vlanNumber INTEGER, vlanDescription DisplayString, vlanAdmStatus INTEGER, vlanOperStatus INTEGER, vlanStatus RowStatus, vlanStpStatus INTEGER, vlanAuthentStatus INTEGER, vlanVoiceStatus INTEGER, vlanIpAddress IpAddress, vlanIpMask IpAddress, vlanIpEncap INTEGER, vlanIpForward INTEGER, vlanIpStatus INTEGER, vlanIpxNet IpxNetworkAddress, vlanIpxEncap INTEGER, vlanIpxRipSapMode INTEGER, vlanIpxDelayTicks INTEGER, vlanIpxStatus INTEGER, vlanTagMobilePortStatus INTEGER, vlanPortMacStatus INTEGER, vlanLocalProxyArp INTEGER, vlanMtu INTEGER, vlan1x1StpStatus INTEGER, vlanflatStpStatus INTEGER, vlanHABandwidth INTEGER, vlanSvlanTrafficType INTEGER, vlanSvlanPriority INTEGER, vlanMacLearningControlStatus INTEGER } vlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number identifying this instance. Valid range from 1 to 4094." ::= { vlanEntry 1 } vlanDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Textual description of the VLAN instance." ::= { vlanEntry 2 } vlanAdmStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative status which can be set by configuration. Disable(1) will disable ALL vports that are connected to this VLAN, enable(2) will enable ALL ports on this VLAN, delete(3) will detach and delete the ports/routers AND remove the VLAN." DEFVAL { enabled } ::= { vlanEntry 3 } vlanOperStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Provide operating status of a particular VLAN environment." ::= { vlanEntry 4 } vlanStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Row status to control creation/deletion of vlans." ::= { vlanEntry 5 } vlanStpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates status of spanning tree for the current VLAN." DEFVAL { enabled } ::= { vlanEntry 6 } vlanAuthentStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates status of authentication for the current VLAN." DEFVAL { disabled } ::= { vlanEntry 7 } vlanVoiceStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates status of voice usage for the current VLAN." DEFVAL { disabled } ::= { vlanEntry 8 } vlanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the VLAN's virtual router port. Note: a vlan does not necessarily have an ip address. Setting one requires that the ip address be set, and optionally the following since they have defaults: ip mask, ip encap, ip forward. Then setting vlanIpStatus to add will create the ip router port for the given vlan (the index)." ::= { vlanEntry 9 } vlanIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Subnetwork mask for VLAN IP Address. Default is class level mask for the ip address." ::= { vlanEntry 10 } vlanIpEncap OBJECT-TYPE SYNTAX INTEGER { ethernet2 (1), snap (2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN's IP router port encapsulation. Not applicable when there is no ip router port." DEFVAL { ethernet2 } ::= { vlanEntry 11 } vlanIpForward OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN's IP router port ip frame forwarding (disabled = ip host only). Not applicable when there is no ip router port." DEFVAL { enable } ::= { vlanEntry 12 } vlanIpStatus OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides ability to add and remove the VLAN ip address." ::= { vlanEntry 13 } vlanIpxNet OBJECT-TYPE SYNTAX IpxNetworkAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPX network address. Note: a vlan does not necessarily have an ipx net number. Setting one requires that the ipx net be set, and optionally the ipx encap, ipx rip-sap mode, and delay ticks (all have defaults). Then the vlanIpxStatus should be set to add to create the ipx router port." ::= { vlanEntry 14 } vlanIpxEncap OBJECT-TYPE SYNTAX INTEGER { ethernet2 (1), novellraw (2), llc (3), snap (4), notApplicable(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "IPX of frame enapsulation of IPX VLAN router port. Not applicable when there is no ipx router port." DEFVAL { ethernet2 } ::= { vlanEntry 15 } vlanIpxRipSapMode OBJECT-TYPE SYNTAX INTEGER { riponly (1), ripsap (2), triggered (3), inactive(4), notApplicable(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "IPX advertisement mode. Not applicable when there is no ipx router port." DEFVAL { ripsap } ::= { vlanEntry 16 } vlanIpxDelayTicks OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Tick metric to use for supporting IPX routing decisions." DEFVAL { 0 } ::= {vlanEntry 17 } vlanIpxStatus OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Provides ability to add and remove the VLAN ipx network node." ::= { vlanEntry 18 } vlanTagMobilePortStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled for a VLAN, a mobile port will be moved to the VLAN based on the tag." ::= { vlanEntry 19 } vlanPortMacStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "When enabled for a VLAN, it will be considered a special VLAN not affected by the ordinary vlan commands except the command to delete a VLAN" ::= { vlanEntry 20 } vlanLocalProxyArp OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled for a VLAN, local proxy ARP processing happens on this= VLAN." ::= { vlanEntry 21 } vlanMtu OBJECT-TYPE SYNTAX INTEGER (1280..9198) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum transmission unit i.e. the maximum size of packet that this vlan can handle. It ranges from 1280 to 9198." ::= { vlanEntry 22 } vlan1x1StpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates status of 1x1 spanning tree for the current VLAN." DEFVAL { enabled } ::= { vlanEntry 23} vlanflatStpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates status of flat spanning tree for the current VLAN." DEFVAL { enabled } ::= { vlanEntry 24} vlanHABandwidth OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Bandwidth of flood queue allocated by Q-driver for High Availability vlans. The value ranges from 1 to 50 Mega bits per second." ::= { vlanEntry 25 } vlanSvlanTrafficType OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), customer(1), provider(2), multicastEnterprise(3), multicastVlanStacking(4), eServiceCustomer(6), eServiceManagement(7), eServiceMulticastVlanStacking(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The created SVLAN is desired for carrying customer or provider traffic, default is customer. When creating standard Vlans the value should be notApplicable" DEFVAL { 0 } ::= { vlanEntry 26 } vlanSvlanPriority OBJECT-TYPE SYNTAX INTEGER (-1..7) MAX-ACCESS read-write STATUS current DESCRIPTION "All traffic getting mapped to this Svlan should be either priority mapped or mapped to a specific priority 0-7, default is priority 0. For standard Vlans the value should be -1" DEFVAL { 0 } ::= { vlanEntry 27 } vlanMacLearningControlStatus OBJECT-TYPE SYNTAX INTEGER{ enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of Mac Learning on a vlan" DEFVAL { enabled } ::= { vlanEntry 28 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanMgrVpa OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vpaTable OBJECT-TYPE SYNTAX SEQUENCE OF VpaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Virtual LAN instances in this device." ::= { vlanMgrVpa 1 } vpaEntry OBJECT-TYPE SYNTAX VpaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VLAN-Port Association (VPA) entry." INDEX { vpaVlanNumber, vpaIfIndex } ::= { vpaTable 1 } VpaEntry ::= SEQUENCE { vpaVlanNumber INTEGER, vpaIfIndex Unsigned32, vpaType INTEGER, vpaState INTEGER, vpaStatus RowStatus, vpaPortMacType INTEGER } vpaVlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN number component of this instance. Valid range from 1 to 4094." ::= { vpaEntry 1 } vpaIfIndex OBJECT-TYPE SYNTAX Unsigned32 (1001..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The ifIndex component of this instance." ::= {vpaEntry 2 } vpaType OBJECT-TYPE SYNTAX INTEGER { cfgDefault(1), qTagged(2), mobile(3), mirrored(4), svlan(6), dynamic(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this vpa. Two are statically configured: configured default VPA and qTagged VPA. The mirrored is an internal type set for mirrored ports and the rest are dynamic vlan's 1. cfgDefault - Default vlan VPA Type 2. qTagged - The qTagged vlan VPA Type 3. mobile - The vpa is dynamically created according to rules/policies. 4. mirrored - Set internally when the vpa created is on a mirrored port. 6. slvan - Service vlan vpa's which are created. 7. dynamic - Created by dynamic GVRP or MVRP Protocol." ::= { vpaEntry 3 } vpaState OBJECT-TYPE SYNTAX INTEGER { inactive(1), blocking(2), forwarding(3), filtering(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this vpa: 1. inactive - link down 2. blocking - link up, forwarding down 3. forwarding - link up, forwarding up, sources learned normally 4. filtering - link up, forwarding up, sources filtered." ::= { vpaEntry 4 } vpaStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to create or delete staticPrimary VPAs (default vlans on a port ). Creation replaces the existing staticPrimary VPA while deletion replaces the existing VPA so that the vlan number is 1 for the given port. Of course the corresponding vlan and port must exist." ::= { vpaEntry 5 } vpaPortMacType OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2), inapplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlans" ::= { vpaEntry 6 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanMgrVlanSet OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 3 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanSetVlanCount OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Count of existing VLANs on switch." ::= { vlanMgrVlanSet 1 } vlanSetVlanRouterCount OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Count of VLANs on switch with at least one router port configured." ::= { vlanMgrVlanSet 2 } vlanSetIpRouterCount OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Count of VLANs on switch with IP router port configured." ::= { vlanMgrVlanSet 3 } vlanSetIpxRouterCount OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Count of VLANs on switch with IPX router port configured." ::= { vlanMgrVlanSet 4 } vlanSetMultiRtrMacStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether unique mac assigned to each vlan with router port (limit 64)." DEFVAL { disable } ::= { vlanMgrVlanSet 5 } --YP -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanMgrHAPort OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanHAPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanHAPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Port To HA vlan binding." ::= { vlanMgrHAPort 1 } vlanHAPortEntry OBJECT-TYPE SYNTAX VlanHAPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port To HA vlan binding entry." INDEX { vlanHAPortVlanId, vlanHAPortIfIndex, vlanHAPortType } ::= { vlanHAPortTable 1 } VlanHAPortEntry ::= SEQUENCE { vlanHAPortVlanId INTEGER, vlanHAPortIfIndex Unsigned32, vlanHAPortType INTEGER, vlanHAPortRowStatus RowStatus } vlanHAPortVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The vlan Id in which this port is a HA port" ::= { vlanHAPortEntry 1 } vlanHAPortIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This port is associated with a HA vlan." ::= { vlanHAPortEntry 2 } vlanHAPortType OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of this field will decide whether the port represented by vlanHAPortIfIndex is a ingress port or egress port." ::= { vlanHAPortEntry 3 } vlanHAPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This indicate whether to add or delete the ifIndex" ::= { vlanHAPortEntry 4 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1VLANMgrMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for VLAN Manager." MODULE MANDATORY-GROUPS { vlanMgrVlanGroup, vlanMgrVpaGroup, vlanMgrVlanSetGroup } ::= { alcatelIND1VLANMgrMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx vlanMgrVlanGroup OBJECT-GROUP OBJECTS { vlanNumber, -- vlan table vlanDescription, vlanAdmStatus, vlanOperStatus, vlanStatus, vlan1x1StpStatus, vlanflatStpStatus, vlanStpStatus, vlanAuthentStatus, vlanVoiceStatus, vlanIpAddress, vlanIpMask, vlanIpEncap, vlanIpForward, vlanIpStatus, vlanIpxNet, vlanIpxEncap, vlanIpxRipSapMode, vlanIpxDelayTicks, vlanIpxStatus } STATUS current DESCRIPTION "Collection of objects for management of Vlan Manager VLANs." ::= { alcatelIND1VLANMgrMIBGroups 1 } vlanMgrVpaGroup OBJECT-GROUP OBJECTS { vpaVlanNumber, -- vpa table vpaIfIndex, vpaType, vpaState, vpaStatus } STATUS current DESCRIPTION "Collection of objects for management of Vlan Manager VPAs." ::= { alcatelIND1VLANMgrMIBGroups 2 } vlanMgrVlanSetGroup OBJECT-GROUP OBJECTS { vlanSetVlanCount, vlanSetVlanRouterCount, vlanSetIpRouterCount, vlanSetIpxRouterCount, vlanSetMultiRtrMacStatus } STATUS current DESCRIPTION "Collection of objects for Vlan Manager global properties." ::= { alcatelIND1VLANMgrMIBGroups 3 } END