ALCATEL-IND1-SNMP-AGENT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF softentIND1SnmpAgt FROM ALCATEL-IND1-BASE; alcatelIND1SNMPAgentMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line SNMP Agent Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "Addressing discrepancies with Alcatel Standard." ::= { softentIND1SnmpAgt 1 } alcatelIND1SNMPAgentMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For SNMP Agent Subsystem Managed Objects." ::= { alcatelIND1SNMPAgentMIB 1 } alcatelIND1SNMPAgentMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For SNMP Agent Subsystem Conformance Information." ::= { alcatelIND1SNMPAgentMIB 2 } alcatelIND1SNMPAgentMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For SNMP Agent Subsystem Units Of Conformance." ::= { alcatelIND1SNMPAgentMIBConformance 1 } alcatelIND1SNMPAgentMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For SNMP Agent Subsystem Compliance Statements." ::= { alcatelIND1SNMPAgentMIBConformance 2 } -- -- SNMP Agent configuration -- snmpAgtConfig OBJECT IDENTIFIER ::= { alcatelIND1SNMPAgentMIBObjects 1 } SnmpAgtSecurityLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The switch security level" SYNTAX INTEGER { noSec(1), authSet(2), authAll(3), privSet(4), privAll(5), trapOnly(6) } snmpAgtSecurityLevel OBJECT-TYPE SYNTAX SnmpAgtSecurityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Level of security required for SNMP get or SET. noSec: no security; all the PDU with a known user id are accepted authSet: authentication required for set; all GET are accepted, but not authenticated SET are rejected. authAll: authentication required for SET and GET; not authenticated SET and GET are rejected. privSet: authentication required for GET and encryption required for SET. privAll: encryption required for SET and GET. trapOnly: no SNMP GET or SET are accepted." DEFVAL { noSec } ::= { snmpAgtConfig 1} snmpAgtCommunityMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the community mode is enabled, the SNMPv1/v2 packets must use the community names." DEFVAL { enabled } ::= { snmpAgtConfig 2 } -- -- SNMP Agent Epilogue Control Files anchoring -- snmpAgtCtlFiles OBJECT-IDENTITY STATUS current DESCRIPTION "MIB entity on which to attach the MODULE-IDENTITY for the Epilogue(R) control files." ::= { alcatelIND1SNMPAgentMIBObjects 3} -- -- SNMP Source Ip Preferred Configuration -- snmpAgtSourceIpConfig OBJECT-TYPE SYNTAX INTEGER { default (1), noLoopback0 (2), ipInterface (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP Agent Configuration 1 -- Default(Loopback0 or closest IP) 2 -- No Loopback0 3 -- Interface IP Specified by User" DEFVAL { default } ::= { alcatelIND1SNMPAgentMIBObjects 4 } snmpAgtSourceIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Source IP of SNMP Packets" ::= { alcatelIND1SNMPAgentMIBObjects 5 } -- -- Compliance Statements -- alcatelIND1SNMPAgentMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for SNMP Agent Subsystem." MODULE -- this module MANDATORY-GROUPS { snmpAgtConfigGroup } ::= { alcatelIND1SNMPAgentMIBCompliances 1 } -- -- Units Of Conformance -- snmpAgtConfigGroup OBJECT-GROUP OBJECTS { snmpAgtSecurityLevel, snmpAgtCommunityMode, snmpAgtSourceIp, snmpAgtSourceIpConfig } STATUS current DESCRIPTION "Collection of objects for SNMP Agent configuration." ::= { alcatelIND1SNMPAgentMIBGroups 1 } END