ALCATEL-IND1-QCN-MIB DEFINITIONS ::= BEGIN IMPORTS Integer32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF softentIND1QcnMib FROM ALCATEL-IND1-BASE; alcatelIND1QcnMIB MODULE-IDENTITY LAST-UPDATED "201109010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line System Capability Manager, to allow for system control and limitation setting, of different, features through out the system. Capability manager is a centralized process which provides hardware information and capability to other processes. To optimize the system performance , certain features may be configured to a lower than the hardware limit through capability manager. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2011 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201109010000Z" DESCRIPTION "Capability Manager is used to set system wide limitation." ::= { softentIND1QcnMib 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1QcnMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For QCN Subsystem Managed Objects." ::= { alcatelIND1QcnMIB 1 } alcatelIND1QcnMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For QCN Subsystem Conformance Information." ::= { alcatelIND1QcnMIB 2 } alcatelIND1QcnMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For QCN Subsystem Units Of Conformance." ::= { alcatelIND1QcnMIBConformance 1 } alcatelIND1QcnMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For QCN Subsystem Compliance Statements." ::= { alcatelIND1QcnMIBConformance 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alaQcnConfig OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 1 } alaQcnConformance OBJECT IDENTIFIER ::= { alcatelIND1QcnMIBObjects 2 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- xxxxxxxxxxxxxxxxxxxx -- QCN Global Controls -- xxxxxxxxxxxxxxxxxxxx alaQcnGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaQcnGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of QCN global configuration." ::= { alaQcnConfig 1 } alaQcnGlobalEntry OBJECT-TYPE SYNTAX AlaQcnGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A QCN global Entry." INDEX { alaQcnGlobalCompId } ::= { alaQcnGlobalTable 1 } AlaQcnGlobalEntry ::= SEQUENCE { alaQcnGlobalCompId Integer32, alaQcnGlobalCNMVlanTag Integer32, alaQcnGlobalCID Integer32 } alaQcnGlobalCompId OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Comp Id is the index to this table." ::= { alaQcnGlobalEntry 1 } alaQcnGlobalCNMVlanTag OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "When set, the vlan tag overrides the incoming vlan id and forces CNMs to be transmitted in that vlan." DEFVAL { 0 } ::= { alaQcnGlobalEntry 2 } alaQcnGlobalCID OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Congestion Point ID sent as part of the Congestion Notification Message." DEFVAL { 0 } ::= { alaQcnGlobalEntry 3 } -- xxxxxxxxxxxxxxxxxxxxxxxx -- QCN Port Instance Table -- xxxxxxxxxxxxxxxxxxxxxxxx alaQcnPortInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaQcnPortInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of DCP Port Instances." ::= { alaQcnConfig 2 } alaQcnPortInstanceEntry OBJECT-TYPE SYNTAX AlaQcnPortInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DCP Port Instance Entry." INDEX { alaQcnPIIfIndex, alaQcnPIPriority } ::= { alaQcnPortInstanceTable 1 } AlaQcnPortInstanceEntry ::= SEQUENCE { alaQcnPIIfIndex Unsigned32, alaQcnPIPriority Unsigned32, alaQcnPIPriorityReset TruthValue, alaQcnPICncpStatsClear TruthValue, alaQcnPICncpReset TruthValue } alaQcnPIIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex of this port." ::= { alaQcnPortInstanceEntry 1 } alaQcnPIPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Priority identifier of this port." ::= { alaQcnPortInstanceEntry 2 } alaQcnPIPriorityReset OBJECT-TYPE SYNTAX TruthValue { true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to true to reset the priority configuration to the global default." ::= { alaQcnPortInstanceEntry 3 } alaQcnPICncpStatsClear OBJECT-TYPE SYNTAX TruthValue { true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to true to clear the cncp statistics for this port priority. Will do nothing if stats are disabled." ::= { alaQcnPortInstanceEntry 4 } alaQcnPICncpReset OBJECT-TYPE SYNTAX TruthValue { true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set to true to reset the cncp configuration to the global default for this port priority." ::= { alaQcnPortInstanceEntry 5 } -- ------------------------------------------------------------- -- Compliance Statements -- ------------------------------------------------------------- alcatelIND1QcnMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for QCN Subsystem." MODULE -- this module MANDATORY-GROUPS { alaQcnGlobalGroup, alaQcnPortInstanceGroup } ::= { alcatelIND1QcnMIBCompliances 1 } -- ------------------------------------------------------------- -- Units Of Conformance -- ------------------------------------------------------------- alaQcnGlobalGroup OBJECT-GROUP OBJECTS { alaQcnGlobalCNMVlanTag, alaQcnGlobalCID } STATUS current DESCRIPTION "Collection of Global QCN Configuration for management of QCN." ::= { alcatelIND1QcnMIBGroups 1 } alaQcnPortInstanceGroup OBJECT-GROUP OBJECTS { alaQcnPIPriorityReset, alaQcnPICncpStatsClear, alaQcnPICncpReset } STATUS current DESCRIPTION "Collection of QCN Port level Configuration for management of QCN." ::= { alcatelIND1QcnMIBGroups 2 } END