ALCATEL-IND1-IPX-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-IDENTITY, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF routingIND1Ipx FROM ALCATEL-IND1-BASE; alcatelIND1IPXMIB MODULE-IDENTITY LAST-UPDATED "200704030000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This is the proprietary MIB for the IPX routing sub-sytem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "200704030000Z" DESCRIPTION "The latest version of this MIB Module." ::= {routingIND1Ipx 1} alcatelIND1IPXMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPXMIB 1 } -- NetNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IPX network number. It is a 32-bit value divided into 4 octets." SYNTAX OCTET STRING(SIZE(4)) HostAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IPX host MAC address. It is a group of the 6 octets from the MAC address." SYNTAX OCTET STRING(SIZE(6)) -- Object groups alaIpxRoutingGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX routing information." ::= {alcatelIND1IPXMIBObjects 1} alaIpxFilterGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX filtering information." ::= {alcatelIND1IPXMIBObjects 2} alaIpxTimerGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX timer information." ::= {alcatelIND1IPXMIBObjects 3} -- Objects --Static Routes Table -- This table contains the information about all the static routes -- defined.There may be more than one static route to any given -- destination.Only the route currently being used will also be -- present in the Destination Table defined above. alaIpxStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Static Routes table is used and add entries and extract information from the static routes configured in the system." ::= {alaIpxRoutingGroup 1} alaIpxStaticRouteEntry OBJECT-TYPE SYNTAX IPXStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one static route." INDEX { alaIpxStaticRouteNetNum } ::= {alaIpxStaticRouteTable 1} IPXStaticRouteEntry ::= SEQUENCE { alaIpxStaticRouteNetNum NetNumber, alaIpxStaticRouteNextHopNet NetNumber, alaIpxStaticRouteNextHopNode HostAddress, alaIpxStaticRouteTicks INTEGER, alaIpxStaticRouteHopCount INTEGER, alaIpxStaticRouteRowStatus RowStatus } alaIpxStaticRouteNetNum OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX network number of the route's destination." DEFVAL { '00000000'h } ::= {alaIpxStaticRouteEntry 1} alaIpxStaticRouteNextHopNet OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The IPX network number of the router used to reach the first hop in the static route." DEFVAL { '00000000'h } ::= {alaIpxStaticRouteEntry 2} alaIpxStaticRouteNextHopNode OBJECT-TYPE SYNTAX HostAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPX node number of the router used to reach the first hop in the static route." DEFVAL { '000000000000'h } ::= {alaIpxStaticRouteEntry 3} alaIpxStaticRouteTicks OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The delay, in ticks, to reach the route's destination." DEFVAL { 0 } ::= {alaIpxStaticRouteEntry 4} alaIpxStaticRouteHopCount OBJECT-TYPE SYNTAX INTEGER(0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of hops necessary to reach the destination." DEFVAL { 0 } ::= {alaIpxStaticRouteEntry 5} alaIpxStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxStaticRouteTable is constrained by the operational state of the corresponding static route. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxStaticRouteEntry 6} --This table contains the information about the default route -- for IPX. alaIpxDefRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXDefRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The default route table contains information about the destinations to which all packets are sent when the destination network is not known." ::= {alaIpxRoutingGroup 2} alaIpxDefRouteEntry OBJECT-TYPE SYNTAX IPXDefRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One table entry per switch for default route." INDEX { alaIpxDefRouteVlanId } ::= {alaIpxDefRouteTable 1} IPXDefRouteEntry ::= SEQUENCE { alaIpxDefRouteVlanId INTEGER, alaIpxDefRouteNet NetNumber, alaIpxDefRouteNode HostAddress, alaIpxDefRouteRowStatus RowStatus } alaIpxDefRouteVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId for this filter. If VlanId equals 0, the filter is applied globally." DEFVAL { 0 } ::= {alaIpxDefRouteEntry 1} alaIpxDefRouteNet OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The IPX network number of the router used to reach the first hop in the default route." DEFVAL { '00000000'h } ::= {alaIpxDefRouteEntry 2} alaIpxDefRouteNode OBJECT-TYPE SYNTAX HostAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPX node number of the router used to reach the first hop in the default route." DEFVAL { '000000000000'h } ::= {alaIpxDefRouteEntry 3} alaIpxDefRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxDefRouteTable is constrained by the operational state of the corresponding default route entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxDefRouteEntry 4} --This table contains the information about the extended RIP / SAP -- messages for IPX. alaIpxExtMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXExtMsgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The extended RIP and SAP messages table contains information about which vlans use extended RIP and SAP packets." ::= {alaIpxRoutingGroup 3} alaIpxExtMsgEntry OBJECT-TYPE SYNTAX IPXExtMsgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One table entry per Vlan." INDEX { alaIpxExtMsgVlanId } ::= {alaIpxExtMsgTable 1} IPXExtMsgEntry ::= SEQUENCE { alaIpxExtMsgVlanId INTEGER, alaIpxExtMsgMode INTEGER, alaIpxExtMsgRowStatus RowStatus } alaIpxExtMsgVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId for this filter. If VlanId equals 0, the filter is applied globally." DEFVAL { 0 } ::= {alaIpxExtMsgEntry 1} alaIpxExtMsgMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether extended RIP/SAP packets are sent and received." DEFVAL { disabled } ::= {alaIpxExtMsgEntry 2} alaIpxExtMsgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxExtMsgTable is constrained by the operational state of the corresponding watchdog entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxExtMsgEntry 3} alaIpxFlush OBJECT-TYPE SYNTAX INTEGER {rip(1), sap(2), both(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Flushes the routing and the SAP tables. The tables will then be rebuilt from the broadcast messages received from the networks. Reading this variable is undefined" ::= {alaIpxRoutingGroup 4} --RIP / SAP Filter Table -- This table contains the information about all of the IPX RIP / SAP -- filters that have been defined. alaIpxRipSapFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXRipSapFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Rip/Sap Filter Table contains information about all filters that have been defined." ::= {alaIpxFilterGroup 1} alaIpxRipSapFilterEntry OBJECT-TYPE SYNTAX IPXRipSapFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one filter." INDEX { alaIpxRipSapFilterVlanId, alaIpxRipSapFilterType, alaIpxRipSapFilterNet, alaIpxRipSapFilterNetMask, alaIpxRipSapFilterNode, alaIpxRipSapFilterNodeMask, alaIpxRipSapFilterSvcType } ::= {alaIpxRipSapFilterTable 1} IPXRipSapFilterEntry ::= SEQUENCE { alaIpxRipSapFilterVlanId INTEGER, alaIpxRipSapFilterType INTEGER, alaIpxRipSapFilterNet NetNumber, alaIpxRipSapFilterNetMask NetNumber, alaIpxRipSapFilterNode HostAddress, alaIpxRipSapFilterNodeMask HostAddress, alaIpxRipSapFilterSvcType INTEGER, alaIpxRipSapFilterMode INTEGER, alaIpxRipSapFilterRowStatus RowStatus } alaIpxRipSapFilterVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId for this filter. If VlanId equals 0, the filter is applied globally." DEFVAL { 0 } ::= {alaIpxRipSapFilterEntry 1} alaIpxRipSapFilterType OBJECT-TYPE SYNTAX INTEGER { sapOutput(1), sapInput(2), gnsOutput(3), ripOutput(4), ripInput(5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of filter. " DEFVAL { 1 } ::= {alaIpxRipSapFilterEntry 2} alaIpxRipSapFilterNet OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Network Address to filter. A network address of all 0 's is used to denote All Networks." DEFVAL { '00000000'h } ::= {alaIpxRipSapFilterEntry 3} alaIpxRipSapFilterNetMask OBJECT-TYPE SYNTAX NetNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Network Mask to be used." DEFVAL { 'ffffffff'h } ::= {alaIpxRipSapFilterEntry 4} alaIpxRipSapFilterNode OBJECT-TYPE SYNTAX HostAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX node address to filter. A node address of all 0 's is used to denote All Nodes." DEFVAL { '000000000000'h } ::= {alaIpxRipSapFilterEntry 5} alaIpxRipSapFilterNodeMask OBJECT-TYPE SYNTAX HostAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX node address mask to be used." DEFVAL { 'ffffffffffff'h } ::= {alaIpxRipSapFilterEntry 6} alaIpxRipSapFilterSvcType OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SAP service type on which to filter. The SAP service types are defined by Novell.A value of ALL(65535) indicates that all services will be filtered." DEFVAL { 65535 } ::= {alaIpxRipSapFilterEntry 7} alaIpxRipSapFilterMode OBJECT-TYPE SYNTAX INTEGER { allow(1), block(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The action defined by this filter. block (1) means packets matching this filter will be blocked, and allow(0) means that packets matching this filter will be allowed." DEFVAL { allow } ::= {alaIpxRipSapFilterEntry 8} alaIpxRipSapFilterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxRipSapFilterTable is constrained by the operational state of the corresponding filter entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxRipSapFilterEntry 10} --This table contains the information about the IPX Watchdog Spoofing -- status of all of the WAN routing services. alaIpxWatchdogSpoofTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXWatchdogSpoofEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Watchdog Spoofing Table contains information about all of the current IPX WAN watchdog spoofing entry statuses." ::= {alaIpxFilterGroup 2} alaIpxWatchdogSpoofEntry OBJECT-TYPE SYNTAX IPXWatchdogSpoofEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one WAN routing service." INDEX { alaIpxWatchdogSpoofVlanId } ::= {alaIpxWatchdogSpoofTable 1} IPXWatchdogSpoofEntry ::= SEQUENCE { alaIpxWatchdogSpoofVlanId INTEGER, alaIpxWatchdogSpoofMode INTEGER, alaIpxWatchdogSpoofRowStatus RowStatus } alaIpxWatchdogSpoofVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans." DEFVAL { 0 } ::= {alaIpxWatchdogSpoofEntry 1} alaIpxWatchdogSpoofMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether the IPX Watchdog Spoofing is enabled or disabled.When enabled, this routing service will spoof IPX Watchdog packets.When disabled, this routing service will not spoof IPX Watchdog packets." DEFVAL { enabled } ::= {alaIpxWatchdogSpoofEntry 2} alaIpxWatchdogSpoofRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxWatchdogSpoofTable is constrained by the operational state of the corresponding watchdog entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxWatchdogSpoofEntry 3} --This table contains the information about the IPX Serialization -- Filtering Status of all of the WAN routing services. alaIpxSerialFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXSerialFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Serialization Filtering Table contains information about all of the current IPX WAN serialization filtering entry statuses." ::= {alaIpxFilterGroup 3} alaIpxSerialFilterEntry OBJECT-TYPE SYNTAX IPXSerialFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one WAN routing service." INDEX { alaIpxSerialFilterVlanId } ::= {alaIpxSerialFilterTable 1} IPXSerialFilterEntry ::= SEQUENCE { alaIpxSerialFilterVlanId INTEGER, alaIpxSerialFilterMode INTEGER, alaIpxSerialFilterRowStatus RowStatus } alaIpxSerialFilterVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans." DEFVAL { 0 } ::= {alaIpxSerialFilterEntry 1} alaIpxSerialFilterMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether the IPX Serialization Filtering is enabled or disabled.When enabled, this routing service will filter IPX Serialization packets.When disabled, this routing service will not filter IPX Serialization packets." DEFVAL { enabled } ::= {alaIpxSerialFilterEntry 2} alaIpxSerialFilterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxSerialFilterTable is constrained by the operational state of the corresponding filter entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxSerialFilterEntry 3} --This table contains the information about the SPX Keepalive Spoofing -- status of all of the WAN routing services. alaSpxKeepaliveSpoofTable OBJECT-TYPE SYNTAX SEQUENCE OF SPXKeepaliveSpoofEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SPX Keepalive Spoofing Table contains information about all of the current IPX WAN SPX spoofing filtering entry statuses." ::= {alaIpxFilterGroup 4} alaSpxKeepaliveSpoofEntry OBJECT-TYPE SYNTAX SPXKeepaliveSpoofEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one WAN routing service." INDEX { alaSpxKeepaliveSpoofVlanId } ::= {alaSpxKeepaliveSpoofTable 1} SPXKeepaliveSpoofEntry ::= SEQUENCE { alaSpxKeepaliveSpoofVlanId INTEGER, alaSpxKeepaliveSpoofMode INTEGER, alaSpxKeepaliveSpoofRowStatus RowStatus } alaSpxKeepaliveSpoofVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans." DEFVAL { 0 } ::= {alaSpxKeepaliveSpoofEntry 1} alaSpxKeepaliveSpoofMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether the SPX Keepalive Spoofing is enabled or disabled.When enabled, this routing service will spoof SPX Keepalive packets.When disabled, this routing service will not spoof SPX Keepalive packets." DEFVAL { enabled } ::= {alaSpxKeepaliveSpoofEntry 2} alaSpxKeepaliveSpoofRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxKeepaliveSpoofTable is constrained by the operational state of the corresponding keepalive entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaSpxKeepaliveSpoofEntry 3} --This table contains the information about the IPX Type 20 packet -- control for NetBios over IPX control. alaIpxType20Table OBJECT-TYPE SYNTAX SEQUENCE OF IPXType20Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Type 20 Table contains information about all of the current Type 20 filtering entry statuses." ::= {alaIpxFilterGroup 5} alaIpxType20Entry OBJECT-TYPE SYNTAX IPXType20Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one Virtual LAN." INDEX { alaIpxType20VlanId } ::= {alaIpxType20Table 1} IPXType20Entry ::= SEQUENCE { alaIpxType20VlanId INTEGER, alaIpxType20Mode INTEGER, alaIpxType20RowStatus RowStatus } alaIpxType20VlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally." DEFVAL { 0 } ::= {alaIpxType20Entry 1} alaIpxType20Mode OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether IPX Type 20 packet are enabled or disabled.When enabled, this routing interface will forward Type 20 packets.When disabled, the packets will not." DEFVAL { enabled } ::= {alaIpxType20Entry 2} alaIpxType20RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxType20Table is constrained by the operational state of the corresponding type 20 entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxType20Entry 3} --This table contains the information about the IPX RIP and SAP timer -- control. alaIpxTimerTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPX Timer Table contains information about all of the current Timer adjustments entry statuses." ::= {alaIpxTimerGroup 1} alaIpxTimerEntry OBJECT-TYPE SYNTAX IPXTimerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to one Virtual LAN." INDEX { alaIpxTimerVlanId } ::= {alaIpxTimerTable 1} IPXTimerEntry ::= SEQUENCE { alaIpxTimerVlanId INTEGER, alaIpxTimerRip INTEGER, alaIpxTimerSap INTEGER, alaIpxTimerRowStatus RowStatus } alaIpxTimerVlanId OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally." DEFVAL { 0 } ::= {alaIpxTimerEntry 1} alaIpxTimerSap OBJECT-TYPE SYNTAX INTEGER(1..180) MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether IPX SAP packet timer duration." DEFVAL { 60 } ::= {alaIpxTimerEntry 2} alaIpxTimerRip OBJECT-TYPE SYNTAX INTEGER(1..180) MAX-ACCESS read-create STATUS current DESCRIPTION "This controls whether IPX RIP packet timer duration." DEFVAL { 60 } ::= {alaIpxTimerEntry 3} alaIpxTimerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxTimerTable is constrained by the operational state of the corresponding timer entry. The RowStatus values that are supported are the following: active: This indicates that the row is active and valid. createAndGo: This will create the row and activate it. destroy: This value will deactivate the row and delete from the system." ::= {alaIpxTimerEntry 4} -- conformance information alcatelIND1IPXMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPXMIB 2 } alcatelIND1IPXMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1IPXMIBConformance 1 } alcatelIND1IPXMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1IPXMIBConformance 2 } -- alcatelIND1IPXMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for IPX Subsystem and ALCATEL-IND1-IPX-MIB." MODULE -- this module MANDATORY-GROUPS { alcatelIND1IPXMIBStaticRouteGroup, alcatelIND1IPXMIBDefRouteGroup, alcatelIND1IPXMIBExtMsgGroup, alcatelIND1IPXMIBFlushGroup, alcatelIND1IPXMIBRipSapFilterGroup, alcatelIND1IPXMIBWatchdogSpoofGroup, alcatelIND1IPXMIBSerialFilterGroup, alcatelIND1IPXMIBKeepaliveSpoofGroup, alcatelIND1IPXMIBType20Group, alcatelIND1IPXMIBTimerGroup } ::= { alcatelIND1IPXMIBCompliances 1 } -- units of conformance alcatelIND1IPXMIBStaticRouteGroup OBJECT-GROUP OBJECTS { alaIpxStaticRouteNextHopNet, alaIpxStaticRouteNextHopNode, alaIpxStaticRouteTicks, alaIpxStaticRouteHopCount, alaIpxStaticRouteRowStatus } STATUS current DESCRIPTION "A collection of objects from Static Route Table." ::= { alcatelIND1IPXMIBGroups 1 } alcatelIND1IPXMIBDefRouteGroup OBJECT-GROUP OBJECTS { alaIpxDefRouteNet, alaIpxDefRouteNode, alaIpxDefRouteRowStatus } STATUS current DESCRIPTION "A collection of objects from Default Route Table." ::= { alcatelIND1IPXMIBGroups 2 } alcatelIND1IPXMIBExtMsgGroup OBJECT-GROUP OBJECTS { alaIpxExtMsgMode, alaIpxExtMsgRowStatus } STATUS current DESCRIPTION "A collection of objects from Extended Message Table." ::= { alcatelIND1IPXMIBGroups 3 } alcatelIND1IPXMIBFlushGroup OBJECT-GROUP OBJECTS { alaIpxFlush } STATUS current DESCRIPTION "A collection of objects to flush the RIP and SAP tables." ::= { alcatelIND1IPXMIBGroups 4 } alcatelIND1IPXMIBRipSapFilterGroup OBJECT-GROUP OBJECTS { alaIpxRipSapFilterMode, alaIpxRipSapFilterRowStatus } STATUS current DESCRIPTION "A collection of objects from the RIP and SAP Filter tables." ::= { alcatelIND1IPXMIBGroups 5 } alcatelIND1IPXMIBWatchdogSpoofGroup OBJECT-GROUP OBJECTS { alaIpxWatchdogSpoofMode, alaIpxWatchdogSpoofRowStatus } STATUS current DESCRIPTION "A collection of objects from the Watchdog spoof tables." ::= { alcatelIND1IPXMIBGroups 6 } alcatelIND1IPXMIBSerialFilterGroup OBJECT-GROUP OBJECTS { alaIpxSerialFilterMode, alaIpxSerialFilterRowStatus } STATUS current DESCRIPTION "A collection of objects from the Serialization Filter tables." ::= { alcatelIND1IPXMIBGroups 7 } alcatelIND1IPXMIBKeepaliveSpoofGroup OBJECT-GROUP OBJECTS { alaSpxKeepaliveSpoofMode, alaSpxKeepaliveSpoofRowStatus } STATUS current DESCRIPTION "A collection of objects from the Keepalive Spoof tables." ::= { alcatelIND1IPXMIBGroups 8 } alcatelIND1IPXMIBType20Group OBJECT-GROUP OBJECTS { alaIpxType20Mode, alaIpxType20RowStatus } STATUS current DESCRIPTION "A collection of objects from the Type 20 packet tables." ::= { alcatelIND1IPXMIBGroups 9 } alcatelIND1IPXMIBTimerGroup OBJECT-GROUP OBJECTS { alaIpxTimerRip, alaIpxTimerSap, alaIpxTimerRowStatus } STATUS current DESCRIPTION "A collection of objects from the RIP and SAP Timer tables." ::= { alcatelIND1IPXMIBGroups 10 } END