ALCATEL-IND1-CHASSIS-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32, Integer32, IpAddress, Counter32 FROM SNMPv2-SMI PhysicalIndex, entPhysicalIndex FROM ENTITY-MIB hardentIND1Physical, hardentIND1Chassis FROM ALCATEL-IND1-BASE SnmpAdminString FROM SNMP-FRAMEWORK-MIB MacAddress, TruthValue, DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; alcatelIND1ChassisMIB MODULE-IDENTITY LAST-UPDATED "201103230000Z" ORGANIZATION "Alcatel-Lucent, Enterprise Solutions Division" CONTACT-INFO "Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: Alcatel-Lucent, Enterprise Solutions Division (Formerly Alcatel Internetworking, Incorporated) 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: North America +1 800 995 2696 Latin America +1 877 919 9526 Europe +31 23 556 0100 Asia +65 394 7933 All Other +1 818 878 4507 Electronic Mail: support@ind.alcatel.com World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" DESCRIPTION "This module describes an authoritative enterprise-specific Simple etwork Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the Chassis Supervision Chassis MIB for managing physical chassis objects not covered in the IETF Entity MIB (rfc 2737). The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE" REVISION "201110310000Z" DESCRIPTION "Added changes for virtual chassis." REVISION "201110140000Z" DESCRIPTION "Added chasEntPhysPowerUsed object." REVISION "201108050000Z" DESCRIPTION "Added chasEntTemperatureTable." REVISION "201103230000Z" DESCRIPTION "Added image file MD5 checksum changed alert, airflow, and temperature alerts" REVISION "201005130000Z" DESCRIPTION "Fixed the Notifications to use MIB Module OID.0 as Notifications root." REVISION "200706180000Z" DESCRIPTION "Addressing discrepancies with Alcatel Standard." ::= { hardentIND1Chassis 1 } alcatelIND1ChassisMIBNotifications OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis MIB Subsystem Notifications." ::= { alcatelIND1ChassisMIB 0 } alcatelIND1ChassisMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Managed Objects." ::= { alcatelIND1ChassisMIB 1 } alcatelIND1ChassisMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Conformance Information." ::= { alcatelIND1ChassisMIB 2 } alcatelIND1ChassisMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Units Of Conformance." ::= { alcatelIND1ChassisMIBConformance 1 } alcatelIND1ChassisMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis MIB Subsystem Compliance Statements." ::= { alcatelIND1ChassisMIBConformance 2 } alcatelIND1ChassisPhysMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Managed Objects." ::= { hardentIND1Physical 1 } alcatelIND1ChassisPhysMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Conformance Information." ::= { hardentIND1Physical 2 } alcatelIND1ChassisPhysMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Units Of Conformance." ::= { alcatelIND1ChassisPhysMIBConformance 1 } alcatelIND1ChassisPhysMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision Chassis Physical MIB Subsystem Compliance Statements." ::= { alcatelIND1ChassisPhysMIBConformance 2 } -- Textual Conventions AlaChasBpsShelfId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BPS shelf Id ." SYNTAX Integer32 (1..3) ChasTrapsBPSPowerSupply ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for type of bps power supply." SYNTAX INTEGER { bpsSysPower1 (1), bpsSysPower2 (2), bpsPoePower1 (3), bpsPoePower2 (4), bpsPoePower3 (5), notApplicable (6) } ChasTrapsBPSFetState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for BPS FET state" SYNTAX INTEGER { on (1), off (2), notApplicable (3) } ChasTrapsBPSEventAlert ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for BPS event alert" SYNTAX INTEGER { bpsPsPlugged (1), bpsPsUnPlugged (2), notApplicable (3) } -- CONTROL MODULE TABLE chasControlModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row for the primary control module." ::= { alcatelIND1ChassisMIBObjects 1 } chasControlModuleEntry OBJECT-TYPE SYNTAX ChasControlModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the primary control module. This table is an extension of the entity physical table but this class is instanciated only for a the primary control module that has a particular Index. When operatiing in virtual chassis mode only the master primary control module is instanciated" INDEX { entPhysicalIndex } ::= { chasControlModuleTable 1 } ChasControlModuleEntry ::= SEQUENCE { chasControlActivateTimeout Integer32, chasControlVersionMngt INTEGER, chasControlDelayedActivateTimer Unsigned32, chasControlCertifyStatus INTEGER, chasControlSynchronizationStatus INTEGER, chasControlAcrossCmmWorkingSynchroStatus INTEGER, chasControlAcrossCmmCertifiedSynchroStatus INTEGER, chasControlNextRunningVersion SnmpAdminString, chasControlCurrentRunningVersion SnmpAdminString, chasControlWorkingVersion SnmpAdminString, chasControlRedundancyTime Integer32, chasControlEmpIpAddress IpAddress, chasControlEmpIpMask IpAddress, chasControlChassisId Integer32 } chasControlActivateTimeout OBJECT-TYPE SYNTAX Integer32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "This value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(reload working) cli command. An Activate reboot must be initiated via the primary CMM and that the timeout value can be accessed via user interface to the primary CMM only. After the Activate reboot has been initiated, a timeout will occur (i.e., an Activate Timeout) at the timeout value specified by the user. If a reboot cancel has not been received prior to the timeout expiration, the primary CMM will automatically reboot (i.e., re-reboot) using the certified configuration. This ensures that an automatic backup reboot is available using the certified configuration in the event that the user is unable to interface with primary CMM as a result of the attempted Activate reboot. If the Activate reboot is successful, the user cancels the backup reboot via the normal reboot cancellation process (i.e., a zero value is written for the object chasControlDelayedRebootTimer)." ::= { chasControlModuleEntry 1 } chasControlVersionMngt OBJECT-TYPE SYNTAX INTEGER { notSignificant(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5), activate(6), issu(7), shutdown(8), vcConvert(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "For the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primary to the secondary (reboot of the secondary). certifyNoSynchro - Copy the file from the working to the certified directory. flashSynchro - Copy the file from the primary to the secondary (reboot of the secondary). restore - Copy the file from the certified directory to the working directory. activate - Reload from the working directory. Activate can be scheduled. issu - In Service Software Upgrade (ISSU). shutdown - Shutdown chassis specified by chasControlChassisId. Halts and powers off NIs, halts primary and secondary CMMs. vcConvert - Copy the image files from the running directory to the working directory." ::= { chasControlModuleEntry 2 } chasControlDelayedActivateTimer OBJECT-TYPE SYNTAX Unsigned32 (0..31622400) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following expiration of the specified activate timer delay. Writing this object to zero results in an immediately activate process. It is now adjusted to wait a maximum of 366 days." ::= { chasControlModuleEntry 3 } chasControlCertifyStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), needCertify(2), certified(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the control module has been certified (that is the working directory matches the certified directory)" ::= { chasControlModuleEntry 4 } chasControlSynchronizationStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoControlModule(2), notSynchronized(3), synchronized(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Returned value is monoControlModule when no other control module is present." ::= { chasControlModuleEntry 5 } chasControlAcrossCmmWorkingSynchroStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoCMM(2), no(3), yes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present)" ::= { chasControlModuleEntry 6 } chasControlAcrossCmmCertifiedSynchroStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), monoCMM(2), no(3), yes(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the /certified has been synchronized across the CMMs if present)" ::= { chasControlModuleEntry 7 } chasControlNextRunningVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The pathname for the image directory that will be used on the next reload. Value may be /flash/certified or /flash/." ::= { chasControlModuleEntry 8 } chasControlCurrentRunningVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The pathname of the image directory to the version that is currently executing. Value may be /flash/certified or /flash/." ::= { chasControlModuleEntry 9 } chasControlWorkingVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The path to the currently specified working image directory. Value may be /flash/certified or /flash/." ::= { chasControlModuleEntry 10 } chasControlRedundancyTime OBJECT-TYPE SYNTAX Integer32 (0..900) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in minutes that the running image must stay up without error before a subsequent error reset will restart the board from the running image. If a CMM in dual-CMM switch fails after a reload and before chasControlRedundancyTime expires, both CMMs will be rebooted from the certified version." ::= { chasControlModuleEntry 11 } chasControlEmpIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB) when configuring EMP interfaces. The IP Address for the primary control module EMP interface. This address is used for managing the chassis and will continue as the EMP interface address after a takeover." ::= { chasControlModuleEntry 12 } chasControlEmpIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB) when configuring EMP interfaces. The IP Address Mask for the primary control module EMP interface. This address mask is used for managing the chassis and will continue as the EMP interface mask after a takeover." ::= { chasControlModuleEntry 13 } chasControlChassisId OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The virtual chassis id for the action specified by chasControlVersionMngt when operating in virtual chassis mode. A value of 0 indicates the local chassis." ::= { chasControlModuleEntry 14 } -- CONTROL REDUNDANT TABLE chasControlRedundantTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per control module. There is always at least one control module in the system." ::= { alcatelIND1ChassisMIBObjects 2 } chasControlRedundantEntry OBJECT-TYPE SYNTAX ChasControlRedundantEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index. When running in virtual chassis mode, entries are instantiated for the Master and all the slave CMMs" INDEX { entPhysicalIndex } ::= { chasControlRedundantTable 1 } ChasControlRedundantEntry ::= SEQUENCE { chasControlNumberOfTakeover Counter32, chasControlDelayedRebootTimer Unsigned32, chasControlDelayedResetAll Integer32 } chasControlNumberOfTakeover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object can be accessed via user interface to either the primary or secondary CMM. The value returned is the number of times that the interfacing control module (either primary or secondary CMM) has changed from primary to secondary mode. This value does not reflect the total number of CMM Takeovers for the switch. To get the total number of Takeovers for the switch, it is necessary to read this value via user interface to each control module independently." ::= { chasControlRedundantEntry 1 } chasControlDelayedRebootTimer OBJECT-TYPE SYNTAX Unsigned32 (0.. 31622400) MAX-ACCESS read-write STATUS current DESCRIPTION "Timer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero value results in a CMM reboot following expiration of the specified reset timer delay. Writing this object to zero results in cancellation of a pending CMM delayed reboot. It is now adjusted to wait a maximum of 366 days." ::= { chasControlRedundantEntry 2 } chasControlDelayedResetAll OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to schedule a delayed reset all action for a chassis when running in virtual chassis mode. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the time until reset." DEFVAL { -1 } ::= { chasControlRedundantEntry 3 } -- CHASSIS TABLE chasChassisTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per chassis. There is always at least one chassis or many when running in virtual chassis mode." ::= { alcatelIND1ChassisMIBObjects 3 } chasChassisEntry OBJECT-TYPE SYNTAX ChasChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type of physical entity: the control module that has a particular Index." INDEX { entPhysicalIndex } ::= { chasChassisTable 1 } ChasChassisEntry ::= SEQUENCE { chasFreeSlots Unsigned32, chasPowerLeft Integer32, chasNumberOfResets Counter32, chasTempRange INTEGER, chasTempThreshold Integer32, chasDangerTempThreshold Integer32, chasPrimaryPhysicalIndex Integer32, chasCPMAHardwareBoardTemp Integer32, chasCFMAHardwareBoardTemp Integer32, chasCPMBHardwareBoardTemp Integer32, chasCFMBHardwareBoardTemp Integer32, chasCFMCHardwareBoardTemp Integer32, chasCFMDHardwareBoardTemp Integer32, chasFTAHardwareBoardTemp Integer32, chasFTBHardwareBoardTemp Integer32, chasNI1HardwareBoardTemp Integer32, chasNI2HardwareBoardTemp Integer32, chasNI3HardwareBoardTemp Integer32, chasNI4HardwareBoardTemp Integer32, chasNI5HardwareBoardTemp Integer32, chasNI6HardwareBoardTemp Integer32, chasNI7HardwareBoardTemp Integer32, chasNI8HardwareBoardTemp Integer32, chasPowerSupplyRedundancy INTEGER } chasFreeSlots OBJECT-TYPE SYNTAX Unsigned32 (0..18) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of free NI front panel slots." ::= { chasChassisEntry 1 } chasPowerLeft OBJECT-TYPE SYNTAX Integer32 (-100000..100000) MAX-ACCESS read-only STATUS current DESCRIPTION "The power still available on the chassis in Watts." ::= { chasChassisEntry 2 } chasNumberOfResets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a count of the number of times this station has been reset since a cold-start." ::= { chasChassisEntry 3 } chasTempRange OBJECT-TYPE SYNTAX INTEGER { unknown(1), notPresent(2), underThreshold(3), overFirstThreshold(4), overDangerThreshold(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Temp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold value (i.e., over vs. under the threshold)." ::= { chasChassisEntry 4 } chasTempThreshold OBJECT-TYPE SYNTAX Integer32 (1..150) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an ascending or descending temperature transition, a temperature notification is provided to the user. When this threshold is exceeded, we start sending traps and other operator notification." ::= { chasChassisEntry 5 } chasDangerTempThreshold OBJECT-TYPE SYNTAX Integer32 (30..150) MAX-ACCESS read-only STATUS current DESCRIPTION "This Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and not changeable." ::= { chasChassisEntry 6 } chasPrimaryPhysicalIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Module is currently primary so it knows what entry in the chasControlModuleTable to access for setting the chasControlVersionMngt values for controling the switch. When running in virtual chassis mode, it will contain the Physical Index of the master primary Control Module." ::= { chasChassisEntry 7 } chasCPMAHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CPMA control module board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 8 } chasCFMAHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMA fabric board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 9 } chasCPMBHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CPMB control module board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 10 } chasCFMBHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMB fabric board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 11 } chasCFMCHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMC fabric board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 12 } chasCFMDHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the CFMD fabric board. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 13 } chasFTAHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for Fantray 1. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 14 } chasFTBHardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for Fantry 2. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 15 } chasNI1HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 1. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 16 } chasNI2HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 2. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 17 } chasNI3HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 3. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 18 } chasNI4HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 4. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 19 } chasNI5HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 5. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 20 } chasNI6HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 6. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 21 } chasNI7HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 7. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 22 } chasNI8HardwareBoardTemp OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for the NI board in slot 8. This temperature is what is used for comparing to the threshold and determining whether the value is in range." ::= { chasChassisEntry 23 } chasPowerSupplyRedundancy OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the state of power supply redundancy mode. When on(1), N+1 mode redundancy is enabled(default mode). In this mode the system controls the power supplies to maintain efficient use of the power supplies, with 1 extra power supply in case of a power supply failure. Unneeded power supplies are powered off. It can be set to off(2) to disable redundancy mode. In this mode all power supplies are powered on." DEFVAL { on } ::= { chasChassisEntry 24 } -- Extension of the Entity physical table chasEntPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity object. The fields are not always significant for every object." ::= { alcatelIND1ChassisPhysMIBObjects 1 } chasEntPhysicalEntry OBJECT-TYPE SYNTAX ChasEntPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical entity." INDEX { entPhysicalIndex } ::= { chasEntPhysicalTable 1 } ChasEntPhysLed ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber." SYNTAX INTEGER { notApplicable (0), off (1), greenOn (2), greenBlink (3), amberOn (4), amberBlink (5) } ChasEntPhysicalEntry ::= SEQUENCE { chasEntPhysAdminStatus INTEGER, chasEntPhysOperStatus INTEGER, chasEntPhysPower Integer32, chasEntPhysModuleType SnmpAdminString, chasEntPhysPartNumber SnmpAdminString, chasEntPhysLedStatusOk1 ChasEntPhysLed, chasEntPhysLedStatusOk2 ChasEntPhysLed, chasEntPhysLedStatusPrimaryCMM ChasEntPhysLed, chasEntPhysLedStatusSecondaryCMM ChasEntPhysLed, chasEntPhysLedStatusTemperature ChasEntPhysLed, chasEntPhysLedStatusFan ChasEntPhysLed, chasEntPhysLedStatusBackupPS ChasEntPhysLed, chasEntPhysLedStatusInternalPS ChasEntPhysLed, chasEntPhysLedStatusControl ChasEntPhysLed, chasEntPhysLedStatusFabric ChasEntPhysLed, chasEntPhysLedStatusPS ChasEntPhysLed, chasEntPhysAsic1Rev SnmpAdminString, chasEntPhysAsic2Rev SnmpAdminString, chasEntPhysAsic3Rev SnmpAdminString, chasEntPhysAsic4Rev SnmpAdminString, chasEntPhysAsic5Rev SnmpAdminString, chasEntPhysAsic6Rev SnmpAdminString, chasEntPhysCpldRev SnmpAdminString, chasEntPhysDaughterFpga1Rev SnmpAdminString, chasEntPhysDaughterFpga2Rev SnmpAdminString, chasEntPhysNiNum Integer32, chasEntPhysGbicNum Integer32, chasEntPhysWaveLen Integer32, chasEntPhysUbootRev SnmpAdminString, chasEntPhysUbootMinibootRev SnmpAdminString, chasEntPhysMacAddress MacAddress, chasEntPhysCpuModel SnmpAdminString, chasEntPhysAirflow INTEGER, chasEntPhysPowerUsed Integer32 } chasEntPhysAdminStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), powerOff(2), powerOn(3), reset(4), takeover(5), resetAll(6), standby(7), resetWithFabric(8), takeoverWithFabrc(9), vcTakeover(10), resetVcAll(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module possible value: powerOn <=> CM up and running reset <=> CM reset takeover <=> Secondary CM takes over resetAll <=> resets the whole switch vcTakeover <=> Reloads master chassis from the current working directory, which initiates a VC takeover. vcResetAll <=> resets entire VC. NI status possible value: powerOn <=> NI is either powered (up or down) or waiting to be powered whenever more power is available. This admin status has not full meaning without chasEntPhysOperStatus powerOff <=> NI down and unpowered and NI will not be powered until user requests it, a failover happens or a reboot happens reset <=> NI reset FABRIC status possible value: powerOn <=> FABRIC is powered powerOff <=> FABRIC is unpowered standby <=> FABRIC is powered and requested to be redundant (inactive) Daughter board status possible value: powerOn <=> DB up and running reset <=> DB reset (TO BE CONFIRMED) Power supply status possible value: powerOn <=> PS up" ::= { chasEntPhysicalEntry 1 } chasEntPhysOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), secondary(5), notPresent(6), unpowered(7), master(8), idle(9), pwrsave(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPresent <=> CM not present up <=> CM up and running down <=> CM down and powered secondary <=> CM in secondary mode and running NI status possible value : notPresent <=> NI not present up <=> NI up and running down <=> NI down and powered unpowered <=> NI unpowered because there is not enough power in the system (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF (chasEntPhysAdminStatus = powerOff). This operational status has not full meaning without chasEntPhysAdminStatus Fabric status possible value : master <=> up and acting as master up <=> up and acting as slave secondary <=> secondary mode for redundancy Daughter board status possible value : notPresent <=> DB not present up <=> DB up and running down <=> DB down and powered Power supply status possible value : up <=> PS up down <=> PS administratively down unpowered <=> PS not plugged in pwrsave <=> chassis in powersave mode, supply turned off Fan Tray status possible value : up <=> powered up down <=> powered down fault <=> fault detected" ::= { chasEntPhysicalEntry 2 } chasEntPhysPower OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module. This value is in Watts." ::= { chasEntPhysicalEntry 3 } chasEntPhysModuleType OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intended for Alcatel internal use." ::= { chasEntPhysicalEntry 4 } chasEntPhysPartNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel." ::= { chasEntPhysicalEntry 5 } chasEntPhysLedStatusOk1 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED OK1 status indication" ::= { chasEntPhysicalEntry 6 } chasEntPhysLedStatusOk2 OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED OK2 status indication" ::= { chasEntPhysicalEntry 7 } chasEntPhysLedStatusPrimaryCMM OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED Primary chassis indication" ::= { chasEntPhysicalEntry 8 } chasEntPhysLedStatusSecondaryCMM OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED Secondary chassis indication" ::= { chasEntPhysicalEntry 9 } chasEntPhysLedStatusTemperature OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) front panel LED temperature status indication" ::= { chasEntPhysicalEntry 10 } chasEntPhysLedStatusFan OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "For Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)" ::= { chasEntPhysicalEntry 11 } chasEntPhysLedStatusBackupPS OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis backup power supply status indication" ::= { chasEntPhysicalEntry 12 } chasEntPhysLedStatusInternalPS OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis internal power supply status indication" ::= { chasEntPhysicalEntry 13 } chasEntPhysLedStatusControl OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis control status" ::= { chasEntPhysicalEntry 14 } chasEntPhysLedStatusFabric OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Management Module (CMM) Fabric status indication" ::= { chasEntPhysicalEntry 15 } chasEntPhysLedStatusPS OBJECT-TYPE SYNTAX ChasEntPhysLed MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis Power Supply Unit status indication" ::= { chasEntPhysicalEntry 16 } chasEntPhysAsic1Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 17 } chasEntPhysAsic2Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 18 } chasEntPhysAsic3Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 19 } chasEntPhysAsic4Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 20 } chasEntPhysAsic5Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 21 } chasEntPhysAsic6Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the ASIC revision Number of the ni entity" ::= { chasEntPhysicalEntry 22 } chasEntPhysCpldRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the CPLD revision Number of the ni entity" ::= { chasEntPhysicalEntry 23 } chasEntPhysDaughterFpga1Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the daughter fpga revision Number of the ni entity" ::= { chasEntPhysicalEntry 24 } chasEntPhysDaughterFpga2Rev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the daughter fpga revision Number of the ni entity" ::= { chasEntPhysicalEntry 25 } chasEntPhysNiNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI. It indicates an NI associated with this physicalEntry" ::= { chasEntPhysicalEntry 26 } chasEntPhysGbicNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the NI. It indicates a gbic associated with this ni" ::= { chasEntPhysicalEntry 27 } chasEntPhysWaveLen OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the wave length of a SFP device" ::= { chasEntPhysicalEntry 28 } chasEntPhysUbootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the uboot version Number of the ni entity" ::= { chasEntPhysicalEntry 29 } chasEntPhysUbootMinibootRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the uboot miniboot version Number of the ni entity" ::= { chasEntPhysicalEntry 30 } chasEntPhysMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the MAC address of the ni entity" ::= { chasEntPhysicalEntry 31 } chasEntPhysCpuModel OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the model description of the cmm/ni cpu" ::= { chasEntPhysicalEntry 32 } chasEntPhysAirflow OBJECT-TYPE SYNTAX INTEGER { frontToRear(0), rearToFront(1), notApplicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis PS fan airflow direction" ::= { chasEntPhysicalEntry 33 } chasEntPhysPowerUsed OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the PS. It is the current reading for the power usage of the PS. This value is in Watts." ::= { chasEntPhysicalEntry 34 } -- Extension of the Entity physical table chasEntTemperatureTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasEntTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per temperature sensor located on an entity represented by the associated row in the entPhysicalTable." ::= { alcatelIND1ChassisPhysMIBObjects 2 } chasEntTemperatureEntry OBJECT-TYPE SYNTAX ChasEntTemperatureEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular physical temperature sensor." INDEX { entPhysicalIndex } ::= { chasEntTemperatureTable 1 } ChasEntTemperatureEntry ::= SEQUENCE { chasEntTempCurrent Integer32, chasEntTempThreshold Integer32, chasEntTempDangerThreshold Integer32, chasEntTempStatus INTEGER } chasEntTempCurrent OBJECT-TYPE SYNTAX Integer32 (0..200) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current output of the temperature sensor in degrees Celsius." ::= { chasEntTemperatureEntry 1 } chasEntTempThreshold OBJECT-TYPE SYNTAX Integer32 (1..150) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the threshold temperature in degrees Celsius for the sensor. When the value of chasEntTempCurrent exceeds this value, a temperature notification is provided to the user." ::= { chasEntTemperatureEntry 2 } chasEntTempDangerThreshold OBJECT-TYPE SYNTAX Integer32 (30..150) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the danger threshold temperature in degrees Celsius for the sensor. When the value of chasEntTempCurrent exceeds this value, the associated physical entity is powered down." ::= { chasEntTemperatureEntry 3 } chasEntTempStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), notPresent(2), underThreshold(3), overFirstThreshold(4), overDangerThreshold(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the status value of the temperature sensor. It reflects the temperature relative to the chasEntTempThreshold and chasEntTempDangerThreshold values." ::= { chasEntTemperatureEntry 4 } -- CHASSIS SUPERVISION RFS TABLES chasSupervisionRfsLsTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionRfsLsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of file on the remote chassis per directory." ::= { alcatelIND1ChassisMIBObjects 4 } chasSupervisionRfsLsEntry OBJECT-TYPE SYNTAX ChasSupervisionRfsLsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a remote file. A row in this table contains a file per directory per chassis" INDEX { chasSupervisionRfsLsFileIndex } ::= { chasSupervisionRfsLsTable 1 } ChasSupervisionRfsLsEntry ::= SEQUENCE { chasSupervisionRfsLsFileIndex Integer32, chasSupervisionRfsLsSlot Unsigned32, chasSupervisionRfsLsDirName SnmpAdminString, chasSupervisionRfsLsFileName SnmpAdminString, chasSupervisionRfsLsFileType INTEGER, chasSupervisionRfsLsFileSize Unsigned32, chasSupervisionRfsLsFileAttr INTEGER, chasSupervisionRfsLsFileDateTime SnmpAdminString } chasSupervisionRfsLsFileIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This value holds file Index for the RFS LS table." ::= { chasSupervisionRfsLsEntry 1} chasSupervisionRfsLsSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "CMM Slot where remote file is located." ::= { chasSupervisionRfsLsEntry 2} chasSupervisionRfsLsDirName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote directory name where remote file is located in" DEFVAL { "/flash" } ::= { chasSupervisionRfsLsEntry 3 } chasSupervisionRfsLsFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..33)) MAX-ACCESS read-only STATUS current DESCRIPTION "The file name of remote file" DEFVAL { "" } ::= { chasSupervisionRfsLsEntry 4 } chasSupervisionRfsLsFileType OBJECT-TYPE SYNTAX INTEGER { file(1), directory(2), undefined(3), tarArchive(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of a remote file" DEFVAL { undefined } ::= { chasSupervisionRfsLsEntry 5 } chasSupervisionRfsLsFileSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "size of this remote file" DEFVAL { 0 } ::= { chasSupervisionRfsLsEntry 6 } chasSupervisionRfsLsFileAttr OBJECT-TYPE SYNTAX INTEGER { undefined(1), readOnly(2), readWrite(3), writeOnly(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "attributes of this remote file" DEFVAL { undefined } ::= { chasSupervisionRfsLsEntry 7 } chasSupervisionRfsLsFileDateTime OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "the modification date and time of a remote file" DEFVAL { "" } ::= { chasSupervisionRfsLsEntry 8 } chasSupervisionRfsDfTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionRfsDfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about file system size and use." ::= { alcatelIND1ChassisMIBObjects 8 } chasSupervisionRfsDfEntry OBJECT-TYPE SYNTAX ChasSupervisionRfsDfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information about file system size and use." INDEX { chasSupervisionRfsDfSlot } ::= { chasSupervisionRfsDfTable 1 } ChasSupervisionRfsDfEntry ::= SEQUENCE { chasSupervisionRfsDfSlot Integer32, chasSupervisionRfsDfFlashFree Unsigned32, chasSupervisionRfsDfFlashSize Unsigned32, chasSupervisionRfsDfUsbFree Unsigned32, chasSupervisionRfsDfUsbSize Unsigned32 } chasSupervisionRfsDfSlot OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where flash space is evaluated." ::= { chasSupervisionRfsDfEntry 1} chasSupervisionRfsDfFlashFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number bytes free on the file system." ::= { chasSupervisionRfsDfEntry 2} chasSupervisionRfsDfFlashSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of total bytes on the file system." ::= { chasSupervisionRfsDfEntry 3} chasSupervisionRfsDfUsbFree OBJECT-TYPE SYNTAX Unsigned32 UNITS "kb" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of free space on the USB file system." ::= { chasSupervisionRfsDfEntry 4} chasSupervisionRfsDfUsbSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "kb" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of space on the USB file system." ::= { chasSupervisionRfsDfEntry 5} chasSupervisionFlashMemTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionFlashMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the systems flash memory information." ::= { alcatelIND1ChassisMIBObjects 9 } chasSupervisionFlashMemEntry OBJECT-TYPE SYNTAX ChasSupervisionFlashMemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This contains one entry for the flash memory table." INDEX { chasSupervisionSlot } ::= { chasSupervisionFlashMemTable 1 } ChasSupervisionFlashMemEntry ::= SEQUENCE { chasSupervisionSlot Integer32, chasSupervisionFlashSize Unsigned32, chasSupervisionFlashFree Unsigned32, chasSupervisionFlashUsed Integer32 } chasSupervisionSlot OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where flash space is evaluated." ::= { chasSupervisionFlashMemEntry 1} chasSupervisionFlashSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Flash memory size." ::= { chasSupervisionFlashMemEntry 2} chasSupervisionFlashFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number bytes free on file system." ::= { chasSupervisionFlashMemEntry 3} chasSupervisionFlashUsed OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "A rounded up percentage of Flash Memory used." ::= { chasSupervisionFlashMemEntry 4} chasSupervisionCmmCertifiedTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasSupervisionCmmCertifiedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains certification status" ::= { alcatelIND1ChassisMIBObjects 10 } chasSupervisionCmmCertifiedEntry OBJECT-TYPE SYNTAX ChasSupervisionCmmCertifiedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about control module certification status. This class is instanciated only when running in virtual chassis mode." INDEX { chasSupervisionCmmNum } ::= { chasSupervisionCmmCertifiedTable 1 } ChasSupervisionCmmCertifiedEntry ::= SEQUENCE { chasSupervisionCmmNum Integer32, chasSupervisionCmmCertifiedStatus INTEGER } chasSupervisionCmmNum OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CMM Slot where /certified directory is evaluated." ::= { chasSupervisionCmmCertifiedEntry 1} chasSupervisionCmmCertifiedStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(0), yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " The status of the CMM certified directory - certified or not." ::= { chasSupervisionCmmCertifiedEntry 2} -- CHASSIS SUPERVISION FAN STATUS TABLE alaChasEntPhysFanTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasEntPhysFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per physical fan entity." ::= { alcatelIND1ChassisMIBObjects 11 } alaChasEntPhysFanEntry OBJECT-TYPE SYNTAX AlaChasEntPhysFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular fan in a chassis physical entity." INDEX { entPhysicalIndex, alaChasEntPhysFanLocalIndex } ::= { alaChasEntPhysFanTable 1 } AlaChasEntPhysFanEntry ::= SEQUENCE { alaChasEntPhysFanLocalIndex Integer32, alaChasEntPhysFanStatus INTEGER, alaChasEntPhysFanAirflow INTEGER } alaChasEntPhysFanLocalIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index to a chassis fan entity" ::={ alaChasEntPhysFanEntry 1 } alaChasEntPhysFanStatus OBJECT-TYPE SYNTAX INTEGER { noStatus(0), notRunning(1), running(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan operational status" ::={alaChasEntPhysFanEntry 2} alaChasEntPhysFanAirflow OBJECT-TYPE SYNTAX INTEGER { frontToRear(0), rearToFront(1), notApplicable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Chassis fan airflow direction" ::={alaChasEntPhysFanEntry 3} -- CHASSIS SUPERVISION RFS COMMANDS alcatelIND1ChassisSupervisionRfsCommands OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For Chassis Supervision RFS commands. For rrm command the Slot, Command and SrcFileName are mandatory. For rcp command the Slot, Command, SrcFileName and DestFileName are mandatory. For rdf command the Slot and Command are mandatory" ::= { alcatelIND1ChassisMIBObjects 5 } chasSupervisionRfsCommandsSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "CMM Slot where RFS command should be executed." ::= { alcatelIND1ChassisSupervisionRfsCommands 1} chasSupervisionRfsCommandsCommand OBJECT-TYPE SYNTAX INTEGER { notSignificant(0), rrm(1), rcp(2), rls(3), rdf(4), rget(5), rput(6), reserved(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies which of the above Actions is to be performed. The commands are as follows: - rrm Remote file remove - rcp Remote file copy (DEPRECATED please use rget or rput instead) - rls Remote directory listing - rdf Remote flash disk space free - rget Remote file get - rput Remote file put" ::= { alcatelIND1ChassisSupervisionRfsCommands 2 } chasSupervisionRfsCommandsSrcFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rrm or rget or rput." ::= { alcatelIND1ChassisSupervisionRfsCommands 3 } chasSupervisionRfsCommandsDestFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rget or rput." ::= { alcatelIND1ChassisSupervisionRfsCommands 4 } chasSupervisionRfsCommandsRlsDirName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote directory name where remote file is located in. This is used when command set to rls." DEFVAL { "/flash" } ::= { alcatelIND1ChassisSupervisionRfsCommands 5 } chasSupervisionRfsCommandsRlsFileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The remote file name where remote file is located in. This is used when command set to rls." ::= { alcatelIND1ChassisSupervisionRfsCommands 6 } chasSupervisionRfsCommandsProcessingState OBJECT-TYPE SYNTAX INTEGER { inProgress(1), ready(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "command executing state for the previous set operation." ::= { alcatelIND1ChassisSupervisionRfsCommands 7 } chasSupervisionRfsCommandsStatusCode OBJECT-TYPE SYNTAX INTEGER { success(1), slotIsPrimary(2), slotNotExist(3), directoryNotExist(4), fileNotExist(5), maximumFilesExceed(6), noDiskSpace(7), systemBusy(8), systemError(9), directoryNotAllowToRemove(10), permissionDenied(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "command completetion status error code." ::= { alcatelIND1ChassisSupervisionRfsCommands 8 } -- CHASSIS CONTROL RELOAD STATUS chasControlReloadStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ChasControlReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing reload status of each network interface slot or stack module" ::= { alcatelIND1ChassisMIBObjects 6 } chasControlReloadEntry OBJECT-TYPE SYNTAX ChasControlReloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of a network interface reload status" INDEX { chasControlReloadIndex } ::={ chasControlReloadStatusTable 1 } ChasControlReloadEntry ::= SEQUENCE { chasControlReloadIndex Integer32, chasControlReloadStatus INTEGER } chasControlReloadIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index (entPhsycialIndex) value of the network interface." ::= { chasControlReloadEntry 1 } chasControlReloadStatus OBJECT-TYPE SYNTAX INTEGER { reloadEnabled(1), reloadDisabled(2), noInterface(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Returned value indicates if the network interface module is enabled or disabled for reload." DEFVAL { reloadDisabled } ::= { chasControlReloadEntry 2 } -- CHASSIS GLOBAL CONTROL OBJECTS chasGlobalControl OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 7 } chasGlobalControlDelayedResetAll OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to schedule a delayed reset all action for a standalone chassis or for the entire virtual chassis when running is virtual chassis mode. To schedule a delayed reset on a specific chassis when running is virtual chassis mode, use the chasControlDelayedResetAll object for the desired chassis. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting down the time until reset." DEFVAL { -1 } ::= { chasGlobalControl 1 } chasGlobalControlLongCommand OBJECT-TYPE SYNTAX INTEGER { none(1), certifySynchro(2), certifyNoSynchro(3), flashSynchro(4), restore(5), reload(6), rfs(7), issu(8), shutdown(9), vcConvert(10), macRelease(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to indicate whether a long-term action is in progress, and if so, what the action is." DEFVAL { none } ::= { chasGlobalControl 2 } chasGlobalControlLongCommandStatus OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), completeSuccess(3), completeFailure(4), confirmationRequired(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the final disposition of the most recent long-term action. When running in virtual chassis mode, the value confirmationRequired(5), indicates that the command identified in chasGlobalControlLongCommand may disrupt the virtual chassis. The command is suspended and requires that chasClobalControlConfirmOperation be set to true, after reviewing the details and accepting the consequences identified by chasGlobalControlConfirmMessage." DEFVAL { none } ::= { chasGlobalControl 3 } chasGlobalControlUpdateFirmware OBJECT-TYPE SYNTAX INTEGER { none(1), ubootCmm(2), ubootNi(3), ubootNiAll(4), ubootCmmAll(5), fpgaCmm(6), fpgaNi(7), fpgaNiDaughterBoard1(8), fpgaNiDaughterBoard2(9), fpgaCmmAll(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object initiates a firmware update. The chasGlobalControlUpdateSlot and chasGlobalControlUpdateFilename objects must be set prior to setting this object to start the update. The progress of the update can be monitored by reading chasGlobalControlUpdateStatus." DEFVAL { none } ::= { chasGlobalControl 4 } chasGlobalControlUpdateSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the slot to be updated. The Slot value is the entPhysicalIndex of the NI or CMM entry in the entPhyscialTable. A value of 0 may be specified to update all NIs or CMMs. The value of 0 is supported only for uboot updates." ::= { chasGlobalControl 5 } chasGlobalControlUpdateFilename OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the filename containing the uboot firmware image." DEFVAL { "" } ::= { chasGlobalControl 6 } chasGlobalControlUpdateStatus OBJECT-TYPE SYNTAX INTEGER { noUpdate(1), updateInProgress(2), updateSuccess(3), updateFailed(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the status of the firmware update. The status for the the update identified by chasGlobalControlUpdateFirmware and chasGlobalControlUpdateSlot is returned. When ubootNiAll(4) ubootCmmAll(5) or fpgaCmmAll(10) update is executed, the status of individual NIs or CMMs may be monitored by changing the value of chasGlobalControlUpdateSlot to the desired NI or CMM slot value prior to reading the status. noUpdate(1) - No firmware update has been initiated. updateInProgress(2) - Update is in progress. updateSuccess(3) - The last firmware update was successful. updateFailed(4) - The last firmware update failed." DEFVAL { noUpdate } ::= { chasGlobalControl 7 } chasGlobalControlConfirmOperation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When operating in virtual chassis mode, this object can be set to true(1) to confirm that the operation identified by chasGlobalControlLongCommand can proceed. Set to false(2) to cancel the operation. This should only be used when chasGlobalControlLongCommandStatus is set to confirmationRequired(5), and the value of chasGlobalControlConfirmMessage has been reviewed." ::= { chasGlobalControl 8 } chasGlobalControlConfirmMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When operating in virtual chassis mode, this object may be read when chasGlobalControlLongCommandStatus is set to confirmationRequired(5). This will happen when an operation such a reload may disrupt the virtual chassis. This object contains information about the consequences of executing the command identified by chasGlobalControlLongCommand. The command has been suspended. To accept the consequences and proceed with the operation, set chasGlobalControlConfirmOperation to true." ::= { chasGlobalControl 9 } alaChasBpsObjects OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 14 } alaChasBpsFwTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasBpsFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per shelf bps firrmware " ::= { alaChasBpsObjects 1 } alaChasBpsFwEntry OBJECT-TYPE SYNTAX AlaChasBpsFwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a bps firrmare" INDEX { alaChasBpsShelfId } ::= { alaChasBpsFwTable 1 } AlaChasBpsFwEntry ::= SEQUENCE { alaChasBpsShelfId AlaChasBpsShelfId, alaChasBpsUpdateFirmware INTEGER, alaChasBpsCpldRev SnmpAdminString, alaChasBpsMmcuRev SnmpAdminString, alaChasBpsCmcuRev SnmpAdminString } alaChasBpsShelfId OBJECT-TYPE SYNTAX AlaChasBpsShelfId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bps shelf ID " ::= { alaChasBpsFwEntry 1 } alaChasBpsUpdateFirmware OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to start BPS firmware update." DEFVAL { disabled } ::= { alaChasBpsFwEntry 2 } alaChasBpsCpldRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the CPLD revision Number of the BPS" ::= { alaChasBpsFwEntry 3 } alaChasBpsMmcuRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the MMCU revision Number of the BPS" ::= { alaChasBpsFwEntry 4 } alaChasBpsCmcuRev OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the CMCU revision Number of the BPS" ::= { alaChasBpsFwEntry 5 } -- -- Connector Priority Table --- alaChasBpsConnectorPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasBpsConnectorPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains BPS connector priority for each slot" ::= { alaChasBpsObjects 2 } alaChasBpsConnectorPriorityEntry OBJECT-TYPE SYNTAX AlaChasBpsConnectorPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about bps connector priority for each slot" INDEX { alaChasBpsChassisId } ::= {alaChasBpsConnectorPriorityTable 1 } AlaChasBpsConnectorPriorityEntry ::= SEQUENCE { alaChasBpsChassisId Integer32, alaChasBpsConnectorShelfId AlaChasBpsShelfId, alaChasBpsConnectorPriority Integer32, alaChasBpsConnectorNum SnmpAdminString, alaChasBpsSerialNum SnmpAdminString } alaChasBpsChassisId OBJECT-TYPE SYNTAX Integer32(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Numbers allocated for the stack NIs as follows: - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable" ::= { alaChasBpsConnectorPriorityEntry 1 } alaChasBpsConnectorShelfId OBJECT-TYPE SYNTAX AlaChasBpsShelfId MAX-ACCESS read-only STATUS current DESCRIPTION "Bps shelf ID " ::= { alaChasBpsConnectorPriorityEntry 2 } alaChasBpsConnectorPriority OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the bps connector priority." DEFVAL { 0 } ::= { alaChasBpsConnectorPriorityEntry 3 } alaChasBpsConnectorNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the bps connector num." ::= { alaChasBpsConnectorPriorityEntry 4 } alaChasBpsSerialNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the bps serial num." ::= { alaChasBpsConnectorPriorityEntry 5 } -- -- Bps Mode Table -- alaChasBpsModeTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasBpsModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row for bps config parameters." ::= { alaChasBpsObjects 3 } alaChasBpsModeEntry OBJECT-TYPE SYNTAX AlaChasBpsModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information about bps mode" INDEX { alaChasBpsShelfId } ::= { alaChasBpsModeTable 1 } AlaChasBpsModeEntry ::= SEQUENCE { alaChasBpsMode INTEGER } alaChasBpsMode OBJECT-TYPE SYNTAX INTEGER { single(1), full(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is only applicable to BPS .Value is used to specify current Mode of switch." DEFVAL { single } ::= { alaChasBpsModeEntry 1 } -- -- BPS Power supplies Table -- alaChasBpsPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasBpsPowerSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains BPS power supplies details" ::= {alaChasBpsObjects 4} alaChasBpsPowerSupplyEntry OBJECT-TYPE SYNTAX AlaChasBpsPowerSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular BPS power supply" INDEX { alaChasBpsPowerSupplyShelfId, alaChasBpsPowerSupplyIndex } ::= { alaChasBpsPowerSupplyTable 1 } AlaChasBpsPowerSupplyEntry ::= SEQUENCE { alaChasBpsPowerSupplyShelfId AlaChasBpsShelfId, alaChasBpsPowerSupplyIndex Integer32, alaChasBpsPowerSupplyName SnmpAdminString, alaChasBpsPowerSupplyDescr SnmpAdminString, alaChasBpsPowerSupplyModuleType SnmpAdminString, alaChasBpsPowerSupplyPartNumber SnmpAdminString, alaChasBpsPowerSupplyHardwareRev SnmpAdminString, alaChasBpsPowerSupplySerialNum SnmpAdminString, alaChasBpsPowerSupplyMfgDate SnmpAdminString, alaChasBpsPowerSupplyOperStatus INTEGER, alaChasBpsPowerSupplyPowerProv Integer32 } alaChasBpsPowerSupplyShelfId OBJECT-TYPE SYNTAX AlaChasBpsShelfId MAX-ACCESS not-accessible STATUS current DESCRIPTION "BPS shelf ID" ::= { alaChasBpsPowerSupplyEntry 1 } alaChasBpsPowerSupplyIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This value hold BPS power power supply Index" ::= { alaChasBpsPowerSupplyEntry 2 } alaChasBpsPowerSupplyName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object hold name of BPS power supply" ::= { alaChasBpsPowerSupplyEntry 3 } alaChasBpsPowerSupplyDescr OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object hold description of BPS power supply" ::= { alaChasBpsPowerSupplyEntry 4 } alaChasBpsPowerSupplyModuleType OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is unique module Type or ID from BPS entities eeprom" ::= { alaChasBpsPowerSupplyEntry 5 } alaChasBpsPowerSupplyPartNumber OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the BPS power supply Part Number " ::= { alaChasBpsPowerSupplyEntry 6 } alaChasBpsPowerSupplyHardwareRev OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor-specific hardware revision string for the BPS power supplies Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string." ::= { alaChasBpsPowerSupplyEntry 7 } alaChasBpsPowerSupplySerialNum OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The vendor-specific serial number string for the BPS power supplies" ::= { alaChasBpsPowerSupplyEntry 8 } alaChasBpsPowerSupplyMfgDate OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..11)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the manufacturing date of the BPS power supplies . Its format is mmm dd yyyy : NOV 27 2012." ::= { alaChasBpsPowerSupplyEntry 9 } alaChasBpsPowerSupplyOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Oper status of BPS power supply" ::= { alaChasBpsPowerSupplyEntry 10 } alaChasBpsPowerSupplyPowerProv OBJECT-TYPE SYNTAX Integer32(0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION " It corresponds to max power of BPS power supply. This value is in Watts." ::= { alaChasBpsPowerSupplyEntry 11 } -- --BPS Total Power allocation Table -- alaChasBpsTotalPowerAllocTable OBJECT-TYPE SYNTAX SEQUENCE OF AlaChasBpsTotalPowerAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row for parameters which reflect total allocation by BPS ." ::= { alaChasBpsObjects 5 } alaChasBpsTotalPowerAllocEntry OBJECT-TYPE SYNTAX AlaChasBpsTotalPowerAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Information about various bps config parameters" INDEX { alaChasBpsShelfId } ::= { alaChasBpsTotalPowerAllocTable 1 } AlaChasBpsTotalPowerAllocEntry ::= SEQUENCE { alaChasBpsSysTotalAvailablePower Integer32, alaChasBpsSysTotalAllocation Integer32, alaChasBpsPoeTotalAvailablePower Integer32, alaChasBpsPoeTotalAllocation Integer32 } alaChasBpsSysTotalAvailablePower OBJECT-TYPE SYNTAX Integer32(0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the BPS Module. It corresponds to system total power available on BPS This value is in Watts." ::= { alaChasBpsTotalPowerAllocEntry 1 } alaChasBpsSysTotalAllocation OBJECT-TYPE SYNTAX Integer32(0..900) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the BPS Modules. It corresponds to total system power allocated by BPS This value is in Watts." ::= { alaChasBpsTotalPowerAllocEntry 2 } alaChasBpsPoeTotalAvailablePower OBJECT-TYPE SYNTAX Integer32(0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the BPS Modules. It corresponds to system total power available on BPS This value is in Watts." ::= { alaChasBpsTotalPowerAllocEntry 3 } alaChasBpsPoeTotalAllocation OBJECT-TYPE SYNTAX Integer32(0..6000) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is only applicable to the Bps Modules. It corresponds to total POE power allocated by BPS This value is in Watts." ::= { alaChasBpsTotalPowerAllocEntry 4 } -- --Chassis traps mib : chassisTraps -- --Chassis traps Object definition chassisTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1ChassisMIBObjects 13 } -- --textual conventions -- ChassisTrapsStrLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "enumerated value which provide the urgency level of the STR." SYNTAX INTEGER { strNotFatal (1), --recorverable strApplicationFatal (2), --not recorverable for the application strFatal (3) --not recorverable for the board } ChassisTrapsStrAppID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Application Identification number" SYNTAX Integer32 (0..255) ChassisTrapsStrSnapID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs." SYNTAX Integer32 (0..255) ChassisTrapsStrfileLineNb ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__." SYNTAX Integer32 (1..65535) ChassisTrapsStrErrorNb ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Fault identifier. The error number identifies the kind the detected fault and allows a mapping of the data contained in chassisTrapsdataInfo." SYNTAX Integer32 (0..65535) ChassisTrapsStrdataInfo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes." SYNTAX OCTET STRING (SIZE (0..63)) ChassisTrapsObjectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value which provides the object type involved in the alert trap." SYNTAX INTEGER { chassis (1), ni (2), powerSuply (3), fan (4), cmm (5), fabric (6), gbic (7) } ChassisTrapsObjectNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number defining the order of the object in the set. EX: The number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. An instance of the appearance of the trap could be: failure on a module. Power supply 3. " SYNTAX Integer32 (0..255) ChassisTrapsAlertNumber ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "this number identify the alert among all the possible chassis alert causes." SYNTAX INTEGER { runningWorking (1), -- The working version is used runningCertified (2), -- The certified version is used certifyStarted (3), -- CERTIFY process started certifyFlashSyncStarted (4), -- CERTIFY w/FLASH SYNCHRO process started certifyCompleted (5), -- CERTIFY process completed successfully certifyFailed (6), -- CERTIFY process failed synchroStarted (7), -- Flash Synchronization process started synchroCompleted (8), -- Flash Synchronization completed successfully synchroFailed (9), -- Flash Synchronization failed restoreStarted (10), -- RESTORE process started restoreCompleted (11), -- RESTORE process completed successfully restoreFailed (12), -- RESTORE process failed takeoverStarted (13), -- CMM take-over being processed takeoverDeferred (14), -- CMM take-over deferred takeoverCompleted (15), -- CMM take-over completed macAllocFailed (16), -- CMS MAC allocation failed macRangeFailed (17), -- CMS MAC range addition failed fanFailed (18), -- One or more of the fans is inoperable fanOk (19), -- Fan is operable fansOk (20), -- All fans are operable tempOverThreshold (21), -- CMM temperature over the threshold tempUnderThreshold (22), -- CMM temperature under the threshold tempOverDangerThreshold (23), -- CMM temperature over danger threshold powerMissing (24), -- Not enough power available psNotOperational (25), -- Power Supply is not operational psOperational (26), -- Power supply is operational psAllOperational (27), -- All power supplies are operational redundancyNotSupported (28), -- Hello protocol disabled, Redundancy not supported redundancyDisabledCertifyNeeded (29), -- Hello protocol disabled, Certify needed cmmStartingAsPrimary (30), -- CMM started as primary cmmStartingAsSecondary (31), -- CMM started as secondary cmmStartupCompleted (32), -- end of CMM start up cmmAPlugged (33), -- cmm a plugged cmmBPlugged (34), -- cmm b plugged cmmAUnPlugged (35), -- cmm a unplugged cmmBUnPlugged (36), -- cmm b unplugged lowNvramBattery (37), -- NV RAM battery is low notEnoughFabricsOperational (38), -- Not enough Fabric boards operational simplexNoSynchro (39), -- Only simplex CMM no flash synchro done secAutoActivate (40), -- secondary CMM autoactivating secAutoCertifyStarted (41), -- secondary CMM autocertifying secAutoCertifyCompleted (42), -- secondary CMM autocertify end secInactiveReset (43), -- cmm b unplugged activateScheduled (44), -- ACTIVATE process scheduled activateStarted (45), -- secondary CMM reset because of inactivity getAfileCompleted (46), -- Get A file process completed getAfileFailed (47), -- Failed to get a file from other CMM/Stack sysUpdateStart (48), -- sysUpdate starts sysUpdateInProgress (49), -- sysUpdate in progress sysUpdateError (50), -- sysUpdate error sysUpdateEnd (51), -- sysUpdate ends reloadInProgress (52), -- the system is already in reload workign process c20UpgradeOk (53), -- the c20 license upgrade ok c20UpgradeFailed (54), -- the c20 license upgrade failed c20RestoreOk (55), -- the c20 license restore ok c20RestoreFailed (56), -- the c20 license restore failed c20NiFailed (57), -- the c20 ni board reports failure airflowReverse (58), -- ps and fan have opposit air flow direction tempSWHigh (59), -- the cmm/ni temperature is over SW high level tempHWHigh (60), -- the cmm/ni temperature is over HW high level tempDanger (61), -- the cmm/ni temperature is over HW danger set level imageFileChecksumChanged (62) -- the image file MD5 checksum has changed } -- --object i.e. trap description -- chassisTrapsStr NOTIFICATION-TYPE OBJECTS { chassisTrapsStrLevel , chassisTrapsStrAppID , chassisTrapsStrSnapID , chassisTrapsStrfileName , chassisTrapsStrfileLineNb , chassisTrapsStrErrorNb , chassisTrapsStrcomments , chassisTrapsStrdataInfo } STATUS current DESCRIPTION "A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to aware the user of for maintenance purpose. " ::= { alcatelIND1ChassisMIBNotifications 1 } chassisTrapsAlert NOTIFICATION-TYPE OBJECTS { physicalIndex , chassisTrapsObjectType , chassisTrapsObjectNumber , chassisTrapsAlertNumber , chassisTrapsAlertDescr } STATUS current DESCRIPTION "generic trap notifying something changed in the chassis whatever it's a failure or not " ::= { alcatelIND1ChassisMIBNotifications 2 } chassisTrapsStateChange NOTIFICATION-TYPE OBJECTS { physicalIndex , chassisTrapsObjectType , chassisTrapsObjectNumber , chasEntPhysOperStatus } STATUS current DESCRIPTION "A status change was detected" ::= { alcatelIND1ChassisMIBNotifications 3 } -- BPS related traps -- -- Ni specific chasTrapsBPSLessAllocSysPwr NOTIFICATION-TYPE OBJECTS { physicalIndex, chasTrapsNiRqstdBpsSysPower, chasTrapsNiGrantdBpsSysPower } STATUS current DESCRIPTION "Insufficient system power given by BPS" ::= { alcatelIND1ChassisMIBNotifications 4 } -- Complete shelf specific chasTrapsBPSStateChange NOTIFICATION-TYPE OBJECTS { chasTrapBPSShelfId, chasTrapsBPSPowerSupply, chasTrapsBPSEventAlert } STATUS current DESCRIPTION "BPS power supplies insertion/removal trap" ::= { alcatelIND1ChassisMIBNotifications 5 } -- specific to connector chasTrapsNiBPSFETStateChange NOTIFICATION-TYPE OBJECTS { physicalIndex, chasTrapsBPSSystemFETChange, chasTrapsBPSPoeFETChange } STATUS current DESCRIPTION "BPS power supplies FET state change trap" ::= { alcatelIND1ChassisMIBNotifications 6 } -- BPS related traps end -- objects used in the traps. -- chassisTrapsStrLevel OBJECT-TYPE SYNTAX ChassisTrapsStrLevel MAX-ACCESS read-only STATUS current DESCRIPTION "An enumerated value which provides the urgency level of the STR." ::= {chassisTrapsObj 1} chassisTrapsStrAppID OBJECT-TYPE SYNTAX ChassisTrapsStrAppID MAX-ACCESS read-only STATUS current DESCRIPTION "Application Identification number" ::= {chassisTrapsObj 2} chassisTrapsStrSnapID OBJECT-TYPE SYNTAX ChassisTrapsStrSnapID MAX-ACCESS read-only STATUS current DESCRIPTION "Subapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs." ::= {chassisTrapsObj 3} chassisTrapsStrfileName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the source file where the fault was detected. This is given by the C ANSI macro __FILE__. The path shouldn't appear." ::= {chassisTrapsObj 4} chassisTrapsStrfileLineNb OBJECT-TYPE SYNTAX ChassisTrapsStrfileLineNb MAX-ACCESS read-only STATUS current DESCRIPTION "Line number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__." ::= {chassisTrapsObj 5} chassisTrapsStrErrorNb OBJECT-TYPE SYNTAX ChassisTrapsStrErrorNb MAX-ACCESS read-only STATUS current DESCRIPTION "Fault identificator. The error number identify the kind the detected fault and allow a mapping of the data contained in chassisTrapsdataInfo." ::= {chassisTrapsObj 6} chassisTrapsStrcomments OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "comment text explaning the fault." ::= {chassisTrapsObj 7} chassisTrapsStrdataInfo OBJECT-TYPE SYNTAX ChassisTrapsStrdataInfo MAX-ACCESS read-only STATUS current DESCRIPTION "Additional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes." ::= {chassisTrapsObj 8} chassisTrapsObjectType OBJECT-TYPE SYNTAX ChassisTrapsObjectType MAX-ACCESS read-only STATUS current DESCRIPTION "enumerated value which provide the object type involved in the alert trap." ::= {chassisTrapsObj 9} chassisTrapsObjectNumber OBJECT-TYPE SYNTAX ChassisTrapsObjectNumber MAX-ACCESS read-only STATUS current DESCRIPTION "number defining the order of the object in the set. EX: number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. A instance of the appearance of the trap could be: failure on a module. Power supply 3. " ::= {chassisTrapsObj 10} chassisTrapsAlertNumber OBJECT-TYPE SYNTAX ChassisTrapsAlertNumber MAX-ACCESS read-only STATUS current DESCRIPTION "this number identify the alert among all the possible chassis alert causes." ::= {chassisTrapsObj 11} chassisTrapsAlertDescr OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "description of the alert matching chassisTrapsAlertNumber" ::= {chassisTrapsObj 12} physicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Physical index of the involved object." ::= { chassisTrapsObj 13 } --BPS Traps objects chasTrapsNiRqstdBpsSysPower OBJECT-TYPE SYNTAX Integer32(0..126) MAX-ACCESS read-only STATUS current DESCRIPTION "Requested system power from os-bps" ::= { chassisTrapsObj 14 } chasTrapsNiGrantdBpsSysPower OBJECT-TYPE SYNTAX Integer32(0..126) MAX-ACCESS read-only STATUS current DESCRIPTION "Granted system power from os-bps" ::= { chassisTrapsObj 15 } chasTrapBPSShelfId OBJECT-TYPE SYNTAX Integer32(1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Granted system power from os-bps" ::= { chassisTrapsObj 16 } chasTrapsBPSPowerSupply OBJECT-TYPE SYNTAX ChasTrapsBPSPowerSupply MAX-ACCESS read-only STATUS current DESCRIPTION "value which provide bps power supply involved in the State change trap" ::= { chassisTrapsObj 17 } chasTrapsBPSEventAlert OBJECT-TYPE SYNTAX ChasTrapsBPSEventAlert MAX-ACCESS read-only STATUS current DESCRIPTION "enumerated value identifying alert" ::= { chassisTrapsObj 18 } chasTrapsBPSSystemFETChange OBJECT-TYPE SYNTAX ChasTrapsBPSFetState MAX-ACCESS read-only STATUS current DESCRIPTION "enumerated value which indicate Fet state" ::= { chassisTrapsObj 19 } chasTrapsBPSPoeFETChange OBJECT-TYPE SYNTAX ChasTrapsBPSFetState MAX-ACCESS read-only STATUS current DESCRIPTION "enumerated value which indicate Fet state" ::= { chassisTrapsObj 20 } --BPS Traps objects End -- END Trap Objects -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- COMPLIANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alcatelIND1ChassisMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Chassis Supervision." MODULE MANDATORY-GROUPS { chasControlModuleGroup , chasControlRedundantGroup , chasChassisGroup , chasControlReloadStatusGroup , chasGlobalControlGroup , chassisNotificationGroup , alaChasEntPhysFanGroup , alaChasNotificationObjectGroup , chassisSupervisionRfsCommandsGroup , chasSupervisionCmmCertifiedEntryGroup, chasSupervisionFlashMemEntryGroup , chasSupervisionRfsDfEntryGroup , chasSupervisionRfsLsEntryGroup, alaChasBpsFwGroup, alaChasBpsConnectorPriorityGroup, alaChasBpsModeGroup, alaChasBpsPowerSupplyGroup, alaChasBpsTotalPowerAllocGroup } ::= { alcatelIND1ChassisMIBCompliances 1 } alcatelIND1ChassisPhysMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for Chassis Supervision Physical." MODULE MANDATORY-GROUPS { chasEntPhysicalGroup , chassisPhysNotificationGroup } ::= { alcatelIND1ChassisPhysMIBCompliances 1 } -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -- UNITS OF CONFORMANCE -- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx chasControlModuleGroup OBJECT-GROUP OBJECTS { chasControlActivateTimeout, chasControlVersionMngt, chasControlDelayedActivateTimer, chasControlCertifyStatus, chasControlSynchronizationStatus, chasControlAcrossCmmWorkingSynchroStatus, chasControlAcrossCmmCertifiedSynchroStatus, chasControlNextRunningVersion, chasControlCurrentRunningVersion, chasControlWorkingVersion, chasControlRedundancyTime, chasControlEmpIpAddress, chasControlEmpIpMask, chasControlChassisId } STATUS current DESCRIPTION "Chassis Supervision Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 1 } chasControlRedundantGroup OBJECT-GROUP OBJECTS { chasControlNumberOfTakeover , chasControlDelayedRebootTimer , chasControlDelayedResetAll } STATUS current DESCRIPTION "Chassis Supervision Redundant Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 2 } chasChassisGroup OBJECT-GROUP OBJECTS { chasFreeSlots , chasPowerLeft , chasNumberOfResets , chasTempRange , chasTempThreshold , chasDangerTempThreshold , chasPrimaryPhysicalIndex, chasCPMAHardwareBoardTemp, chasCFMAHardwareBoardTemp, chasCPMBHardwareBoardTemp, chasCFMBHardwareBoardTemp, chasCFMCHardwareBoardTemp, chasCFMDHardwareBoardTemp, chasFTAHardwareBoardTemp, chasFTBHardwareBoardTemp, chasNI1HardwareBoardTemp, chasNI2HardwareBoardTemp, chasNI3HardwareBoardTemp, chasNI4HardwareBoardTemp, chasNI5HardwareBoardTemp, chasNI6HardwareBoardTemp, chasNI7HardwareBoardTemp, chasNI8HardwareBoardTemp, chasPowerSupplyRedundancy } STATUS current DESCRIPTION "Chassis Supervision Chassis Group." ::= { alcatelIND1ChassisMIBGroups 3 } chasControlReloadStatusGroup OBJECT-GROUP OBJECTS { chasControlReloadStatus } STATUS current DESCRIPTION "Chassis Supervision NI Reload Status Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 4 } chasGlobalControlGroup OBJECT-GROUP OBJECTS { chasGlobalControlDelayedResetAll, chasGlobalControlLongCommand, chasGlobalControlLongCommandStatus, chasGlobalControlUpdateFirmware, chasGlobalControlUpdateSlot, chasGlobalControlUpdateFilename, chasGlobalControlUpdateStatus, chasGlobalControlConfirmOperation, chasGlobalControlConfirmMessage } STATUS current DESCRIPTION "Chassis Supervision Global Control Modules Group." ::= { alcatelIND1ChassisMIBGroups 5 } chassisNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { chassisTrapsStr , chassisTrapsAlert, chasTrapsBPSLessAllocSysPwr, chasTrapsBPSStateChange, chasTrapsNiBPSFETStateChange } STATUS current DESCRIPTION "Chassis Supervision Notification Group." ::= { alcatelIND1ChassisMIBGroups 6 } alaChasEntPhysFanGroup OBJECT-GROUP OBJECTS { alaChasEntPhysFanStatus, alaChasEntPhysFanAirflow } STATUS current DESCRIPTION "Chassis Supervision Physical Fan Group." ::= { alcatelIND1ChassisMIBGroups 7 } alaChasNotificationObjectGroup OBJECT-GROUP OBJECTS { chassisTrapsStrLevel, chassisTrapsStrAppID, chassisTrapsStrSnapID, chassisTrapsStrfileName, chassisTrapsStrfileLineNb, chassisTrapsStrErrorNb, chassisTrapsStrcomments, chassisTrapsStrdataInfo, chassisTrapsObjectType, chassisTrapsObjectNumber, chassisTrapsAlertNumber, chassisTrapsAlertDescr, physicalIndex, chasTrapsNiRqstdBpsSysPower, chasTrapsNiGrantdBpsSysPower, chasTrapBPSShelfId, chasTrapsBPSPowerSupply, chasTrapsBPSEventAlert, chasTrapsBPSSystemFETChange, chasTrapsBPSPoeFETChange } STATUS current DESCRIPTION "Chassis Supervision Notification Object Group." ::= { alcatelIND1ChassisMIBGroups 9 } chassisSupervisionRfsCommandsGroup OBJECT-GROUP OBJECTS { chasSupervisionRfsCommandsSlot, chasSupervisionRfsCommandsCommand, chasSupervisionRfsCommandsSrcFileName, chasSupervisionRfsCommandsDestFileName, chasSupervisionRfsCommandsRlsDirName, chasSupervisionRfsCommandsRlsFileName, chasSupervisionRfsCommandsProcessingState, chasSupervisionRfsCommandsStatusCode } STATUS current DESCRIPTION "Chassis Supervision RFS Command Group." ::= { alcatelIND1ChassisMIBGroups 10 } chasSupervisionCmmCertifiedEntryGroup OBJECT-GROUP OBJECTS { chasSupervisionCmmCertifiedStatus } STATUS current DESCRIPTION "Information about Cmm Certified Group." ::= { alcatelIND1ChassisMIBGroups 11 } chasSupervisionFlashMemEntryGroup OBJECT-GROUP OBJECTS { chasSupervisionFlashSize, chasSupervisionFlashFree, chasSupervisionFlashUsed } STATUS current DESCRIPTION "The systems flash memory information group." ::= { alcatelIND1ChassisMIBGroups 12 } chasSupervisionRfsDfEntryGroup OBJECT-GROUP OBJECTS { chasSupervisionRfsDfFlashFree, chasSupervisionRfsDfFlashSize, chasSupervisionRfsDfUsbFree, chasSupervisionRfsDfUsbSize } STATUS current DESCRIPTION "Information about RfsDf file system group." ::= { alcatelIND1ChassisMIBGroups 13 } chasSupervisionRfsLsEntryGroup OBJECT-GROUP OBJECTS { chasSupervisionRfsLsFileIndex, chasSupervisionRfsLsSlot, chasSupervisionRfsLsDirName, chasSupervisionRfsLsFileName, chasSupervisionRfsLsFileType, chasSupervisionRfsLsFileSize, chasSupervisionRfsLsFileAttr, chasSupervisionRfsLsFileDateTime } STATUS current DESCRIPTION "Information about a RfsLs file group." ::= { alcatelIND1ChassisMIBGroups 14 } alaChasBpsFwGroup OBJECT-GROUP OBJECTS { alaChasBpsUpdateFirmware, alaChasBpsCpldRev, alaChasBpsMmcuRev, alaChasBpsCmcuRev } STATUS current DESCRIPTION "Information about BPS FW group." ::= { alcatelIND1ChassisMIBGroups 15 } alaChasBpsConnectorPriorityGroup OBJECT-GROUP OBJECTS { alaChasBpsConnectorShelfId, alaChasBpsConnectorPriority, alaChasBpsConnectorNum, alaChasBpsSerialNum } STATUS current DESCRIPTION "Information about BPS Connector Priority group." ::= { alcatelIND1ChassisMIBGroups 16 } alaChasBpsModeGroup OBJECT-GROUP OBJECTS { alaChasBpsMode } STATUS current DESCRIPTION "Information about BPS Mode group." ::= { alcatelIND1ChassisMIBGroups 17 } alaChasBpsPowerSupplyGroup OBJECT-GROUP OBJECTS { alaChasBpsPowerSupplyName, alaChasBpsPowerSupplyDescr, alaChasBpsPowerSupplyModuleType, alaChasBpsPowerSupplyPartNumber, alaChasBpsPowerSupplyHardwareRev, alaChasBpsPowerSupplySerialNum, alaChasBpsPowerSupplyMfgDate, alaChasBpsPowerSupplyOperStatus, alaChasBpsPowerSupplyPowerProv } STATUS current DESCRIPTION " BPS Power Supply group." ::= { alcatelIND1ChassisMIBGroups 18 } alaChasBpsTotalPowerAllocGroup OBJECT-GROUP OBJECTS { alaChasBpsSysTotalAvailablePower, alaChasBpsSysTotalAllocation, alaChasBpsPoeTotalAvailablePower, alaChasBpsPoeTotalAllocation } STATUS current DESCRIPTION " BPS Total Power Alloc group." ::= { alcatelIND1ChassisMIBGroups 19 } chasEntPhysicalGroup OBJECT-GROUP OBJECTS { chasEntPhysAdminStatus , chasEntPhysOperStatus , chasEntPhysPower , chasEntPhysModuleType , chasEntPhysPartNumber , chasEntPhysLedStatusOk1 , chasEntPhysLedStatusOk2 , chasEntPhysLedStatusPrimaryCMM , chasEntPhysLedStatusSecondaryCMM , chasEntPhysLedStatusTemperature , chasEntPhysLedStatusFan , chasEntPhysLedStatusBackupPS , chasEntPhysLedStatusInternalPS , chasEntPhysLedStatusControl , chasEntPhysLedStatusFabric , chasEntPhysLedStatusPS , chasEntPhysAsic1Rev , chasEntPhysAsic2Rev , chasEntPhysAsic3Rev , chasEntPhysAsic4Rev , chasEntPhysAsic5Rev , chasEntPhysAsic6Rev , chasEntPhysCpldRev , chasEntPhysDaughterFpga1Rev , chasEntPhysDaughterFpga2Rev , chasEntPhysNiNum , chasEntPhysGbicNum , chasEntPhysWaveLen , chasEntPhysUbootRev , chasEntPhysUbootMinibootRev , chasEntPhysMacAddress , chasEntPhysCpuModel , chasEntPhysAirflow , chasEntPhysPowerUsed } STATUS current DESCRIPTION "Chassis (inclosure) Entity Physical Group." ::= { alcatelIND1ChassisPhysMIBGroups 1 } chassisPhysNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { chassisTrapsStr , chassisTrapsAlert , chassisTrapsStateChange } STATUS current DESCRIPTION "Chassis Supervision Physical Notification Group." ::= { alcatelIND1ChassisPhysMIBGroups 2 } chassisTemperatureGroup OBJECT-GROUP OBJECTS { chasEntTempCurrent, chasEntTempDangerThreshold, chasEntTempStatus, chasEntTempThreshold } STATUS current DESCRIPTION "Chassis Supervision Temprature Group." ::= { alcatelIND1ChassisPhysMIBGroups 3 } END