ACC-V25 DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, IpAddress, TimeTicks, Gauge, Counter FROM RFC1155-SMI TRAP-TYPE FROM RFC-1215 accTrapLogSeqNum FROM ACC-SYSTEM accBRG, DisplayString, RowStatus, IfIndex, SmdsAddress FROM ACC-MIB; -- V25Bis Group accV25 OBJECT IDENTIFIER ::= { accBRG 37 } accV25StatTable OBJECT-TYPE SYNTAX SEQUENCE OF AccV25StatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A list of Physical Port Entries that are doing V25Bis Dialing." ::= { accV25 1 } accV25StatEntry OBJECT-TYPE SYNTAX AccV25StatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A table entry providing information about a specific port that is using V25Bis as the dialing procedure." INDEX { accV25IntIndex } ::= { accV25StatTable 1 } AccV25StatEntry ::= SEQUENCE { accV25IntIndex INTEGER, accV25CurState INTEGER, accV25DTRSignal INTEGER, accV25DSRSignal INTEGER, accV25CTSSignal INTEGER, accV25CallAttempts INTEGER, accV25CallSuccess INTEGER } accV25IntIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " This is the port which is currently doing the V25 Bis dialing." ::= { accV25StatEntry 1 } accV25CurState OBJECT-TYPE SYNTAX INTEGER { dte-not-ready(1), dialogue-pending(2), dialogue(3), handshaking(4), call-connected(5), data-transfer(6), clear-by-dte(7) } ACCESS read-only STATUS mandatory DESCRIPTION " This is the current state of the state machine." ::= { accV25StatEntry 2 } accV25DTRSignal OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This is the current state of the 108/2 circuit." ::= { accV25StatEntry 3 } accV25DSRSignal OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This is the current state of the 107 circuit." ::= { accV25StatEntry 4 } accV25CTSSignal OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This is the current state of the 106 circuit." ::= { accV25StatEntry 5 } accV25CallAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The number of Call Attempts made for the current destination." ::= { accV25StatEntry 6 } accV25CallSuccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The number of Call Attempts which were successful for the current destination." ::= { accV25StatEntry 7 } END