-- ==================================================================== -- Copyright (C) 2005 by HUAWEI 3Com TECHNOLOGIES. All rights reserved -- -- Description: DLSW HUAWEI 3Com Specific Features MIB -- Reference: RFC2024 -- Version: V1.0 -- History: -- V1.0 2005-07-20, LiuYingquan -- Initial version -- ==================================================================== A3COM-HUAWEI-SNA-DLSW-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Integer32, Counter32 FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC ifIndex FROM RFC1213-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB dlswTConnConfigEntry, dlswTConnOperEntry, dlswTConnTcpConfigEntry, MacAddressNC, LFSize, TAddress FROM DLSW-MIB h3cCommon FROM A3COM-HUAWEI-OID-MIB; h3cDlswExt MODULE-IDENTITY LAST-UPDATED "200507201900Z" -- Jul 20, 2005 at 19:00 GMT ORGANIZATION "Huawei-3com Technologies co.,Ltd." CONTACT-INFO "R&D Beijing Huawei-3com Technologies Co., Ltd. Oriental Electronic Bld., NO.1, Street 8, Shang-Di Information Industry Base, Hai-Dian District, Beijing, P.R. China Zip:100085 Http://www.huawei-3com.com E-mail:support@huawei-3com.com" DESCRIPTION "The MIB module for management of HUAWEI-3COM specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166." REVISION "200507201900Z" -- Jul 20, 2005 at 19:00 GMT DESCRIPTION "Initial version of this MIB module." ::= { h3cCommon 62 } h3cDlswExtMIBObjects OBJECT IDENTIFIER ::= { h3cDlswExt 1 } h3cdeNode OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 1 } h3cdeTConn OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 2 } h3cdeBridge OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 3 } h3cdeQllc OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 4 } h3cdeSdlc OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 5 } h3cdeLlc2 OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 6 } h3cdeReachableCache OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 7 } h3cdeEthernetBackup OBJECT IDENTIFIER ::= { h3cDlswExtMIBObjects 8 } -- ==================================================================== -- H3C DLSw Extension Node Objects -- ==================================================================== h3cdeNodeVendorID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange." REFERENCE "DLSW: Switch-to-Switch Protocol RFC 1795." ::= { h3cdeNode 1 } h3cdeNodeIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ip address: IPv4 or IPv6." ::= { h3cdeNode 2 } h3cdeNodeLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string." DEFVAL { ''H } -- the empty string ::= { h3cdeNode 3 } h3cdeNodePriority OBJECT-TYPE SYNTAX Integer32 (1..5 | 65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless." DEFVAL { 3 } ::= { h3cdeNode 4 } h3cdeNodeInitPacingWindow OBJECT-TYPE SYNTAX Integer32 (1..2000 | 65535) UNITS "packets" MAX-ACCESS read-write STATUS current DESCRIPTION "Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless." DEFVAL { 40 } ::= { h3cdeNode 5 } h3cdeNodeMaxPacingWindow OBJECT-TYPE SYNTAX Integer32 (1..2000 | 65535) UNITS "packets" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement." DEFVAL { 50 } ::= { h3cdeNode 6 } h3cdeNodeKeepAliveInterval OBJECT-TYPE SYNTAX Integer32 (0..2000 | 65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless." DEFVAL { 30 } ::= { h3cdeNode 7 } h3cdeNodePermitDynamic OBJECT-TYPE SYNTAX INTEGER { permitDynamic(1), forbidDynamic(2), unknown(65535) } MAX-ACCESS read-write STATUS current DESCRIPTION "To accept connections from non-configured remote peer when permitDynamic is specified." DEFVAL { forbidDynamic } ::= { h3cdeNode 8 } h3cdeNodeConnTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define connected state timer." DEFVAL { 300 } ::= { h3cdeNode 9 } h3cdeNodeLocalPendTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define connected state timer." DEFVAL { 30 } ::= { h3cdeNode 10 } h3cdeNodeRemotePendTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define connected state timer." DEFVAL { 30 } ::= { h3cdeNode 11 } h3cdeNodeSnaCacheTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define connected state timer." DEFVAL { 120 } ::= { h3cdeNode 12 } h3cdeNodeExplorerTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define explorer timer." DEFVAL { 30 } ::= { h3cdeNode 13 } h3cdeNodeExplorerWaitTimeout OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Define explorer waiting timer." DEFVAL { 30 } ::= { h3cdeNode 14 } h3cdeNodeConfigSapList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in h3cdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E." DEFVAL { 'FF000000000000000000000000000000'h } ::= { h3cdeNode 15 } h3cdeNodeMaxTransmission OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum retry times for TCP packet. Default value is 5." DEFVAL { 5 } ::= { h3cdeNode 16 } h3cdeNodeMulticastStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast support status. It is disabled by default." DEFVAL { disabled } ::= { h3cdeNode 17 } h3cdeNodeMulticastAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast address. Default is 224.0.10.0. When the h3cdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0." ::= { h3cdeNode 18 } h3cdeNodeResetTcpAll OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset all TCP circuit switch. Any return value is meaningless." ::= { h3cdeNode 19 } h3cdeNodeStCapTcpNum OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Tcp number reported in DLSw Capabilities Exchange." ::= { h3cdeNode 20 } h3cdeNodeTcpQueueMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The max length of TCP queue." DEFVAL { 200 } ::= { h3cdeNode 21 } -- ==================================================================== -- H3C DLSw Extension Transport Connection Configuration Table -- ==================================================================== h3cdeTConnConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeTConnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable." ::= { h3cdeTConn 1 } h3cdeTConnConfigEntry OBJECT-TYPE SYNTAX H3cdeTConnConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for a DLSw peer transport connection." AUGMENTS { dlswTConnConfigEntry } ::= { h3cdeTConnConfigTable 1 } H3cdeTConnConfigEntry ::= SEQUENCE { h3cdeTConnConfigVersion OCTET STRING, h3cdeTConnConfigPriority Integer32, h3cdeTConnConfigLfSize LFSize, h3cdeTConnConfigKeepaliveIntval Integer32, h3cdeTConnConfigBackup INTEGER, h3cdeTConnConfigBackupTAddr TAddress, h3cdeTConnConfigBackupLinger Integer32 } h3cdeTConnConfigVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-create STATUS current DESCRIPTION "This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a h3cdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep h3cdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged." ::= { h3cdeTConnConfigEntry 1 } h3cdeTConnConfigPriority OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority for remote peer." DEFVAL { 3 } ::= { h3cdeTConnConfigEntry 2 } h3cdeTConnConfigLfSize OBJECT-TYPE SYNTAX LFSize MAX-ACCESS read-create STATUS current DESCRIPTION "The largest frame size." ::= { h3cdeTConnConfigEntry 3 } h3cdeTConnConfigKeepaliveIntval OBJECT-TYPE SYNTAX Integer32 (1..1200) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The keepalive interval value." DEFVAL { 30 } ::= { h3cdeTConnConfigEntry 4 } h3cdeTConnConfigBackup OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The current remote peer is configured as the backup of another configured remote peer." DEFVAL { no } ::= { h3cdeTConnConfigEntry 5 } h3cdeTConnConfigBackupTAddr OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-create STATUS current DESCRIPTION "It is the ip address of a configured remote peer of which the current remote peer is configrued as backup." ::= { h3cdeTConnConfigEntry 6 } h3cdeTConnConfigBackupLinger OBJECT-TYPE SYNTAX Integer32 (0..1440) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Backup peer linger." DEFVAL { 5 } ::= { h3cdeTConnConfigEntry 7 } -- ==================================================================== -- H3C DLSw Extension Transport Connection Operation Table -- ==================================================================== h3cdeTConnOperTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeTConnOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable." ::= { h3cdeTConn 2 } h3cdeTConnOperEntry OBJECT-TYPE SYNTAX H3cdeTConnOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that contain spefific operational information for a DLSw peer transport connection." AUGMENTS { dlswTConnOperEntry } ::= { h3cdeTConnOperTable 1 } H3cdeTConnOperEntry ::= SEQUENCE { h3cdeTConnOperPeerType INTEGER, h3cdeTConnOperVendorID OCTET STRING, h3cdeTConnOperVersionString OCTET STRING, h3cdeTConnOperUpTime TimeTicks, h3cdeTConnOperMulticastAddress TAddress, h3cdeTConnOperStCapTcpNumber Integer32, h3cdeTConnOperRecvPkts Counter32, h3cdeTConnOperSendPkts Counter32, h3cdeTConnOperDropPkts Counter32 } h3cdeTConnOperPeerType OBJECT-TYPE SYNTAX INTEGER { configured(1), learningDynamic(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current remote peer is configured when the value is 'configured'." ::= { h3cdeTConnOperEntry 1 } h3cdeTConnOperVendorID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer." ::= { h3cdeTConnOperEntry 2 } h3cdeTConnOperVersionString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Version information of remote peer. The length up to 512 bytes." ::= { h3cdeTConnOperEntry 3 } h3cdeTConnOperUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time (in seconds) since this transport connection last entered the 'connected' state." ::= { h3cdeTConnOperEntry 4 } h3cdeTConnOperMulticastAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-only STATUS current DESCRIPTION "When remote peer supports DLSw2.0, this node identifies its multicast address." ::= { h3cdeTConnOperEntry 5 } h3cdeTConnOperStCapTcpNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of tcp supported when capabilities exchanging." ::= { h3cdeTConnOperEntry 6 } h3cdeTConnOperRecvPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection." ::= { h3cdeTConnOperEntry 7 } h3cdeTConnOperSendPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SSP messages sent on this tcp transport connection." ::= { h3cdeTConnOperEntry 8 } h3cdeTConnOperDropPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SSP messages dropped on this tcp transport connection." ::= { h3cdeTConnOperEntry 9 } -- ==================================================================== -- H3C DLSw Extension TCP Transport Connection Specific Configuration -- ==================================================================== h3cdeTConnTcpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeTConnTcpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable." ::= { h3cdeTConn 3 } h3cdeTConnTcpConfigEntry OBJECT-TYPE SYNTAX H3cdeTConnTcpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024)." AUGMENTS { dlswTConnTcpConfigEntry } ::= { h3cdeTConnTcpConfigTable 1 } H3cdeTConnTcpConfigEntry ::= SEQUENCE { h3cdeTConnTcpConfigQueueMax Integer32 } h3cdeTConnTcpConfigQueueMax OBJECT-TYPE SYNTAX Integer32 (50..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row." DEFVAL { 200 } ::= { h3cdeTConnTcpConfigEntry 1 } -- ==================================================================== -- H3C DLSw Bridge MIB-Group -- ==================================================================== h3cdeBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of bridge group which is serving for DLSw." ::= { h3cdeBridge 1 } h3cdeBridgeEntry OBJECT-TYPE SYNTAX H3cdeBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of bridge information." INDEX { h3cdeBridgeNumIndex } ::= { h3cdeBridgeTable 1 } H3cdeBridgeEntry ::= SEQUENCE { h3cdeBridgeNumIndex Integer32, h3cdeBridgeRowStatus RowStatus } h3cdeBridgeNumIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This value identifies the bridge number." ::= { h3cdeBridgeEntry 1 } h3cdeBridgeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeBridgeEntry 2 } -- ==================================================================== -- H3C DLSw Bridge group number and interface -- ==================================================================== h3cdeBridgeIfTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeBridgeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of interface on which DLSw is active." ::= { h3cdeBridge 2 } h3cdeBridgeIfEntry OBJECT-TYPE SYNTAX H3cdeBridgeIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of bridge interface information." INDEX { ifIndex } ::= { h3cdeBridgeIfTable 1 } H3cdeBridgeIfEntry ::= SEQUENCE { h3cdeBridgeIfBrgGrp Integer32, h3cdeBridgeIfRowStatus RowStatus } h3cdeBridgeIfBrgGrp OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This value identifies the bridge number attached to the interface." ::= { h3cdeBridgeIfEntry 1 } h3cdeBridgeIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeBridgeIfEntry 2 } -- ==================================================================== -- H3C DLSw Extension QLLC Port Configuration Table -- ==================================================================== h3cdeQllcTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeQllcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines attributes related for those QLLC that participate in data link switching." ::= { h3cdeQllc 1 } h3cdeQllcEntry OBJECT-TYPE SYNTAX H3cdeQllcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex belongs to the interface which link protocol is x.25." INDEX { ifIndex } ::= { h3cdeQllcTable 1 } H3cdeQllcEntry ::= SEQUENCE { h3cQllcX121Address Integer32, h3cQllcLocalMac MacAddressNC, h3cQllcLocalSap OCTET STRING, h3cQllcRemoteMac MacAddressNC, h3cQllcRemoteSap OCTET STRING, h3cQllcRowStatus RowStatus } h3cQllcX121Address OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "X.121 address." ::= { h3cdeQllcEntry 1 } h3cQllcLocalMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network." ::= { h3cdeQllcEntry 2 } h3cQllcLocalSap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "The SAP used to represent this link station." ::= { h3cdeQllcEntry 3 } h3cQllcRemoteMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned." DEFVAL { ''H } ::= { h3cdeQllcEntry 4 } h3cQllcRemoteSap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0 | 1)) MAX-ACCESS read-create STATUS current DESCRIPTION "The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned." DEFVAL { ''H } ::= { h3cdeQllcEntry 5 } h3cQllcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeQllcEntry 6 } -- ==================================================================== -- H3C DLSw Extension SDLC Port Configuration Table -- ==================================================================== h3cdeSdlcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeSdlcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines parameters for the interfaces whose link protocol is SDLC." ::= { h3cdeSdlc 1 } h3cdeSdlcPortEntry OBJECT-TYPE SYNTAX H3cdeSdlcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sdlc port entry." INDEX { ifIndex } ::= { h3cdeSdlcPortTable 1 } H3cdeSdlcPortEntry ::= SEQUENCE { h3cdeSdlcPortRole INTEGER, h3cdeSdlcPortSendWindow Integer32, h3cdeSdlcPortModulo INTEGER, h3cdeSdlcPortMaxPdu Integer32, h3cdeSdlcPortMaxSendQueue Integer32, h3cdeSdlcPortMaxTransmission Integer32, h3cdeSdlcPortSimultaneousEnable INTEGER, h3cdeSdlcPortTimerACK Integer32, h3cdeSdlcPortTimerLifeTime Integer32, h3cdeSdlcPortTimerPollPause Integer32, h3cdeSdlcPortRowStatus RowStatus } h3cdeSdlcPortRole OBJECT-TYPE SYNTAX INTEGER { primary(1), seconday(2), norole(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The SDLC role of interface." DEFVAL { norole } ::= { h3cdeSdlcPortEntry 1 } h3cdeSdlcPortSendWindow OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Size of local send window." DEFVAL { 7 } ::= { h3cdeSdlcPortEntry 2 } h3cdeSdlcPortModulo OBJECT-TYPE SYNTAX INTEGER { m8(8), m128(128) } MAX-ACCESS read-create STATUS current DESCRIPTION "Size of modulus." DEFVAL { m8 } ::= { h3cdeSdlcPortEntry 3 } h3cdeSdlcPortMaxPdu OBJECT-TYPE SYNTAX Integer32 (1..17600) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum bytes for incoming frames." DEFVAL { 265 } ::= { h3cdeSdlcPortEntry 4 } h3cdeSdlcPortMaxSendQueue OBJECT-TYPE SYNTAX Integer32 (20..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Size of hold queue." DEFVAL { 50 } ::= { h3cdeSdlcPortEntry 5 } h3cdeSdlcPortMaxTransmission OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of times to retry an operation." DEFVAL { 20 } ::= { h3cdeSdlcPortEntry 6 } h3cdeSdlcPortSimultaneousEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Activate SDLC two-way simultaneous mode." DEFVAL { 1 } ::= { h3cdeSdlcPortEntry 7 } h3cdeSdlcPortTimerACK OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time to wait for a reply to a frame." DEFVAL { 3000 } ::= { h3cdeSdlcPortEntry 8 } h3cdeSdlcPortTimerLifeTime OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time to wait for a reply used by secondary station." DEFVAL { 500 } ::= { h3cdeSdlcPortEntry 9 } h3cdeSdlcPortTimerPollPause OBJECT-TYPE SYNTAX Integer32 (1..10000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Time between polls for each secondary SDLC station." DEFVAL { 1000 } ::= { h3cdeSdlcPortEntry 10 } h3cdeSdlcPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeSdlcPortEntry 11 } -- ==================================================================== -- H3C DLSw Extension LLC2 Port Configuration Table -- ==================================================================== h3cdeLlc2PortTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeLlc2PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines parameters for the Ethernet interface." ::= { h3cdeLlc2 1 } h3cdeLlc2PortEntry OBJECT-TYPE SYNTAX H3cdeLlc2PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLC2 port entry." INDEX { ifIndex } ::= { h3cdeLlc2PortTable 1 } H3cdeLlc2PortEntry ::= SEQUENCE { h3cdeLlc2PortMaxAck Integer32, h3cdeLlc2PortMaxPdu Integer32, h3cdeLlc2PortMaxSendQueue Integer32, h3cdeLlc2PortMaxTransmission Integer32, h3cdeLlc2PortModulo INTEGER, h3cdeLlc2PortReceiveWindow Integer32, h3cdeLlc2PortTimerAck Integer32, h3cdeLlc2PortTimerAckDelay Integer32, h3cdeLlc2PortTimerDetect Integer32, h3cdeLlc2PortTimerBusy Integer32, h3cdeLlc2PortTimerPoll Integer32, h3cdeLlc2PortTimerReject Integer32, h3cdeLlc2PortRowStatus RowStatus } h3cdeLlc2PortMaxAck OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum of I-frames received before ACK." DEFVAL { 3 } ::= { h3cdeLlc2PortEntry 1 } h3cdeLlc2PortMaxPdu OBJECT-TYPE SYNTAX Integer32 (1..1700) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum of LLC2 pdu length." DEFVAL { 1493 } ::= { h3cdeLlc2PortEntry 2 } h3cdeLlc2PortMaxSendQueue OBJECT-TYPE SYNTAX Integer32 (20..200) MAX-ACCESS read-create STATUS current DESCRIPTION "Queue for sending llc2 I-frames." DEFVAL { 50 } ::= { h3cdeLlc2PortEntry 3 } h3cdeLlc2PortMaxTransmission OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Retry times of operations." DEFVAL { 20 } ::= { h3cdeLlc2PortEntry 4 } h3cdeLlc2PortModulo OBJECT-TYPE SYNTAX INTEGER { m8(8), m128(128) } MAX-ACCESS read-create STATUS current DESCRIPTION "Modulus of LLC2." DEFVAL { m128 } ::= { h3cdeLlc2PortEntry 5 } h3cdeLlc2PortReceiveWindow OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum number of I-frames to send before received ACK." DEFVAL { 7 } ::= { h3cdeLlc2PortEntry 6 } h3cdeLlc2PortTimerAck OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Waiting for ACK time after sending an I-frame." DEFVAL { 200 } ::= { h3cdeLlc2PortEntry 7 } h3cdeLlc2PortTimerAckDelay OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum time allows I-frames incoming without replay ACK." DEFVAL { 100 } ::= { h3cdeLlc2PortEntry 8 } h3cdeLlc2PortTimerDetect OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Detect the link status." DEFVAL { 100 } ::= { h3cdeLlc2PortEntry 9 } h3cdeLlc2PortTimerBusy OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Waiting time while other LLC2 station is in busy state." DEFVAL { 300 } ::= { h3cdeLlc2PortEntry 10 } h3cdeLlc2PortTimerPoll OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Waiting time after a P frame is sent." DEFVAL { 5000 } ::= { h3cdeLlc2PortEntry 11 } h3cdeLlc2PortTimerReject OBJECT-TYPE SYNTAX Integer32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Waiting time after a REJ frame is sent." DEFVAL { 500 } ::= { h3cdeLlc2PortEntry 12 } h3cdeLlc2PortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeLlc2PortEntry 13 } -- ==================================================================== -- H3C DLSw Reachable Cache MIB-Group -- ==================================================================== h3cdeRchCacheStat OBJECT IDENTIFIER ::= { h3cdeReachableCache 1 } h3cdeRchCacheMaxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of h3cdeRchCacheIndex." ::= { h3cdeRchCacheStat 1 } h3cdeRchCacheNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The next value of h3cdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in h3cdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows." ::= { h3cdeRchCacheStat 2 } h3cdeRchCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeRchCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reachable cache table." ::= { h3cdeReachableCache 3 } h3cdeRchCacheEntry OBJECT-TYPE SYNTAX H3cdeRchCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Reachable cache entry." INDEX { h3cdeRchCacheIndex } ::= { h3cdeRchCacheTable 1 } H3cdeRchCacheEntry ::= SEQUENCE { h3cdeRchCacheIndex Integer32, h3cdeRchCacheStatus INTEGER, h3cdeRchCacheRemainTime TimeTicks, h3cdeRchCacheMac MacAddressNC, h3cdeRchCacheRemoteIpAddrType InetAddressType, h3cdeRchCacheRemoteIp InetAddress, h3cdeRchCacheRowStatus RowStatus } h3cdeRchCacheIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of reachable cache entry." ::= { h3cdeRchCacheEntry 1 } h3cdeRchCacheStatus OBJECT-TYPE SYNTAX INTEGER { found(1), verify(2), noCacheInfo(3), exploring(4), waiting(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of reachable cache entry." ::= { h3cdeRchCacheEntry 2 } h3cdeRchCacheRemainTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Remain time of reachable cache entry." ::= { h3cdeRchCacheEntry 3 } h3cdeRchCacheMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "MAC address of reachable cache entry." ::= { h3cdeRchCacheEntry 4 } h3cdeRchCacheRemoteIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Remote peer ip address type." ::= { h3cdeRchCacheEntry 5 } h3cdeRchCacheRemoteIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Remote peer ip address of reachable cache entry." ::= { h3cdeRchCacheEntry 6 } h3cdeRchCacheRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeRchCacheEntry 7 } -- ==================================================================== -- H3C DLSw Ethernet Backup MIB-Group -- ==================================================================== h3cdeEBMacMapStat OBJECT IDENTIFIER ::= { h3cdeEthernetBackup 1 } h3cdeEBMacMapMaxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum of h3cdeEBMacMapIndex." ::= { h3cdeEBMacMapStat 1 } h3cdeEBMacMapNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The next value of h3cdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in h3cdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows." ::= { h3cdeEBMacMapStat 2 } h3cdeEBIfTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeEBIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information of interface which works for DLSw Ethernet redundancy." ::= { h3cdeEthernetBackup 3 } h3cdeEBIfEntry OBJECT-TYPE SYNTAX H3cdeEBIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameters defined for DLSw Ethernet redundancy interface." INDEX { ifIndex } ::= { h3cdeEBIfTable 1 } H3cdeEBIfEntry ::= SEQUENCE { h3cdeEBMulticastMac MacAddressNC, h3cdeEBPriority Integer32, h3cdeEBtimer Integer32, h3cdeEBRowStatus RowStatus } h3cdeEBMulticastMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address." DEFVAL { '000000000000'h } ::= { h3cdeEBIfEntry 1 } h3cdeEBPriority OBJECT-TYPE SYNTAX Integer32 (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority configured for the Ethernet redundancy of DLSw module." DEFVAL { 100 } ::= { h3cdeEBIfEntry 2 } h3cdeEBtimer OBJECT-TYPE SYNTAX Integer32 (100..5000) MAX-ACCESS read-create STATUS current DESCRIPTION "Timer for the Ethernet redundancy of DLSw module." DEFVAL { 500 } ::= { h3cdeEBIfEntry 3 } h3cdeEBRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus." ::= { h3cdeEBIfEntry 4 } h3cdeEBMacMapTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cdeEBMacMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address mapping table." ::= { h3cdeEthernetBackup 4 } h3cdeEBMacMapEntry OBJECT-TYPE SYNTAX H3cdeEBMacMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address mapping entry." INDEX { ifIndex, h3cdeEBMacMapIndex } ::= { h3cdeEBMacMapTable 1 } H3cdeEBMacMapEntry ::= SEQUENCE { h3cdeEBMacMapIndex Integer32, h3cdeEBMacMapLocalMac MacAddressNC, h3cdeEBMacMapRemoteMac MacAddressNC, h3cdeEBMacMapNeighbour MacAddressNC, h3cdeEBMacMapRowStatus RowStatus } h3cdeEBMacMapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of MAC address mapping entry." ::= { h3cdeEBMacMapEntry 1 } h3cdeEBMacMapLocalMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "Local MAC address in MAC address mapping. When creating a new conceptual row, h3cdeEBMacMapLocalMac and h3cdeEBMacMapRemoteMac should be set simultaneously." ::= { h3cdeEBMacMapEntry 2 } h3cdeEBMacMapRemoteMac OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "Remote MAC address of MAC address mapping. When creating a new conceptual row, h3cdeEBMacMapLocalMac and h3cdeEBMacMapRemoteMac should be set simultaneously." ::= { h3cdeEBMacMapEntry 3 } h3cdeEBMacMapNeighbour OBJECT-TYPE SYNTAX MacAddressNC MAX-ACCESS read-create STATUS current DESCRIPTION "Neighbour of MAC address mapping." ::= { h3cdeEBMacMapEntry 4 } h3cdeEBMacMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Status of MAC address mapping entry." ::= { h3cdeEBMacMapEntry 5 } END