-- ================================================================= -- Copyright (C) 2006 by HUAWEI-3Com TECHNOLOGIES. All rights reserved -- -- Description: RPR private MIB. Description of entity extend properties for -- IEEE-802DOT17-RPR-MIB -- Reference: IEEE-802DOT17-RPR-MIB -- Version: V1.1 -- History: -- V1.0 created by qinxia -- V1.1 modified by hexuefei,Add the RPR packet drop counters table. -- ================================================================= A3COM-HUAWEI-RPR-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddress, Integer32, Counter64, MacAddress, Gauge32, OBJECT-TYPE FROM SNMPv2-SMI h3cCommon FROM A3COM-HUAWEI-OID-MIB rprTopoImageEntry, rprTopoImageMacAddress, rprTopoImageInetAddress FROM IEEE-802DOT17-RPR-MIB InterfaceIndex FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB RowStatus, TruthValue FROM SNMPv2-TC; h3cRpr MODULE-IDENTITY LAST-UPDATED "200503161000Z" -- March 16, 2005 at 10:18:41 GMT ORGANIZATION "Huawei 3Com Technologies Co., Ltd." CONTACT-INFO "Platform Team Huawei 3Com Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085" DESCRIPTION "This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner." REVISION "200503161000Z" -- March 16, 2005 at 10:18:41 GMT DESCRIPTION "First published version." ::= { h3cCommon 60 } -- -- Textual conventions -- H3cRprRingletID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the path on which data flow is selected. The valid value is ringlet0 and ringlet1. They indicate two RPR fiber rings. Ringlet0 refers to outer ring and ringlet1 refers to inner ring." REFERENCE "IEEE 802.17 V3.3 Subclause 11.2.1.1 Span and ringlet parameterization." SYNTAX INTEGER { ringlet0(1), ringlet1(2) } H3cRprServiceClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the service class of RPR. The valid value is ClassC, ClassB, ClassA1 and ClassA0." REFERENCE "IEEE 802.17 V3.3 Subclause 7.3 Service class." SYNTAX INTEGER { classC(1), classB(2), classA1(3), classA0(4) } h3cRprObjects OBJECT IDENTIFIER ::= { h3cRpr 1 } -- RPR maximum define table h3cRprMaxmumDefine OBJECT IDENTIFIER ::= { h3cRprObjects 1 } h3cRprMaxmumDefineTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprMaxmumDefineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the specs of RPR ring." ::= { h3cRprMaxmumDefine 1 } h3cRprMaxmumDefineEntry OBJECT-TYPE SYNTAX H3cRprMaxmumDefineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of RPR Maximum Table." INDEX { h3cRprMaxMumIfIndex } ::= { h3cRprMaxmumDefineTable 1 } H3cRprMaxmumDefineEntry ::= SEQUENCE { h3cRprMaxMumIfIndex InterfaceIndex, h3cRprMaxStationNumDefine INTEGER, h3cRprMaxReservedRateDefine Gauge32 } h3cRprMaxMumIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of this RPR interface." ::= { h3cRprMaxmumDefineEntry 1 } h3cRprMaxStationNumDefine OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max station number supported by RPR ring." ::= { h3cRprMaxmumDefineEntry 2 } h3cRprMaxReservedRateDefine OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { h3cRprMaxmumDefineEntry 3 } h3cRprTopoImage OBJECT IDENTIFIER ::= { h3cRprObjects 2 } -- extension to the RPR topology table h3cRprTopoImageXTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprTopoImageXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB." REFERENCE "rprTopoImageTable in IEEE-802DOT17-RPR-MIB." ::= { h3cRprTopoImage 1 } h3cRprTopoImageXEntry OBJECT-TYPE SYNTAX H3cRprTopoImageXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet." AUGMENTS { rprTopoImageEntry } ::= { h3cRprTopoImageXTable 1 } H3cRprTopoImageXEntry ::= SEQUENCE { h3cRprTopoImageXWestEdgeStatus TruthValue, h3cRprTopoImageXEastEdgeStatus TruthValue, h3cRprTopoImageXStationName SnmpAdminString } h3cRprTopoImageXWestEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The current edge status of the west span. If an edge exists,the h3cRprTopoImageXWestEdgeStatus is true. Otherwise, the h3cRprTopoImageXWestEdgeStatus is false." REFERENCE "IEEE 802.17 V3.3 Subclause 11.1.1.5, Edges" ::= { h3cRprTopoImageXEntry 3 } h3cRprTopoImageXEastEdgeStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The current edge status of the east span. If an edge exists, the h3cRprTopoImageXEastEdgeStatus is true. Otherwise, the h3cRprTopoImageXEastEdgeStatus is false." REFERENCE "IEEE 802.17 V3.3 Subclause 11.1.1.5, Edges" ::= { h3cRprTopoImageXEntry 4 } h3cRprTopoImageXStationName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The operator assigned station name. The operator can assigned it by h3cRprTopoImageXStationName." REFERENCE "IEEE 802.17 V3.3 Subclause 11.2.6, stationName." ::= { h3cRprTopoImageXEntry 5 } h3cRprSpanCounters OBJECT IDENTIFIER ::= { h3cRprObjects 3 } -- RPR source mac counters table h3cRprSrcMacCountTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprSrcMacCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station." ::= { h3cRprSpanCounters 1 } h3cRprSrcMacCountEntry OBJECT-TYPE SYNTAX H3cRprSrcMacCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Source Mac Count Table." INDEX { h3cRprSrcMacCountIfIndex, h3cRprSrcMacCountBySrcAddress } ::= { h3cRprSrcMacCountTable 1 } H3cRprSrcMacCountEntry ::= SEQUENCE { h3cRprSrcMacCountIfIndex InterfaceIndex, h3cRprSrcMacCountBySrcAddress MacAddress, h3cRprSrcMacCountReceivedFrames Counter64, h3cRprSrcMacCountReceivedOctets Counter64 } h3cRprSrcMacCountIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of this RPR interface." REFERENCE "RFC 2863, ifIndex." ::= { h3cRprSrcMacCountEntry 1 } h3cRprSrcMacCountBySrcAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the source station where the frames come from." ::= { h3cRprSrcMacCountEntry 2 } h3cRprSrcMacCountReceivedFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames received from a particular MAC address of source station." ::= { h3cRprSrcMacCountEntry 3 } h3cRprSrcMacCountReceivedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Octets received from a particular MAC address of source station." ::= { h3cRprSrcMacCountEntry 4 } -- RPR destination mac counters table h3cRprDestMacCountTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprDestMacCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station." ::= { h3cRprSpanCounters 2 } h3cRprDestMacCountEntry OBJECT-TYPE SYNTAX H3cRprDestMacCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR MAC Destination Count Table." INDEX { h3cRprDestMacCountIfIndex, h3cRprDestMacCountByDestAddress } ::= { h3cRprDestMacCountTable 1 } H3cRprDestMacCountEntry ::= SEQUENCE { h3cRprDestMacCountIfIndex InterfaceIndex, h3cRprDestMacCountByDestAddress MacAddress, h3cRprDestMacCountReceivedFrames Counter64, h3cRprDestMacCountReceivedOctets Counter64 } h3cRprDestMacCountIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprDestMacCountEntry 1 } h3cRprDestMacCountByDestAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the destination station where the frames are sent to." ::= { h3cRprDestMacCountEntry 2 } h3cRprDestMacCountReceivedFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames sent to a particular MAC address of destination station." ::= { h3cRprDestMacCountEntry 3 } h3cRprDestMacCountReceivedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Octets sent to a particular MAC address of destination station." ::= { h3cRprDestMacCountEntry 4 } -- RPR packet drop counters table h3cRprPktDropCountTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprPktDropCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion." ::= { h3cRprSpanCounters 3 } h3cRprPktDropCountEntry OBJECT-TYPE SYNTAX H3cRprPktDropCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Packet Drop Count Table." INDEX { h3cRprPktDropCntIfIndex, h3cRprPktDropCntRingletID } ::= { h3cRprPktDropCountTable 1 } H3cRprPktDropCountEntry ::= SEQUENCE { h3cRprPktDropCntIfIndex InterfaceIndex, h3cRprPktDropCntRingletID H3cRprRingletID, h3cRprDownFlowClassAPktDrops Counter64, h3cRprUpFlowClassAPktDrops Counter64, h3cRprDownFlowClassBPktDrops Counter64, h3cRprUpFlowClassBPktDrops Counter64, h3cRprDownFlowClassCPktDrops Counter64, h3cRprUpFlowClassCPktDrops Counter64 } h3cRprPktDropCntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of this RPR interface." REFERENCE "RFC 2863, ifIndex." ::= { h3cRprPktDropCountEntry 1 } h3cRprPktDropCntRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Ringlet of the station through which the packets transmit." ::= { h3cRprPktDropCountEntry 2 } h3cRprDownFlowClassAPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class A packets which transmit down from the host." ::= { h3cRprPktDropCountEntry 3 } h3cRprUpFlowClassAPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class A packets which transmit up to the host." ::= { h3cRprPktDropCountEntry 4 } h3cRprDownFlowClassBPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class B packets which transmit down from the host." ::= { h3cRprPktDropCountEntry 5 } h3cRprUpFlowClassBPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class B packets which transmit up to the host." ::= { h3cRprPktDropCountEntry 6 } h3cRprDownFlowClassCPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class C packets which transmit down from the host." ::= { h3cRprPktDropCountEntry 7 } h3cRprUpFlowClassCPktDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total dropped number of Class C packets which transmit up to the host." ::= { h3cRprPktDropCountEntry 8 } h3cRprRS OBJECT IDENTIFIER ::= { h3cRprObjects 4 } -- The RPR static ring selection table h3cRprStaticRSTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprStaticRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Static Ring Selection table contains the static ring selection information by the way of configuration." ::= { h3cRprRS 1 } h3cRprStaticRSEntry OBJECT-TYPE SYNTAX H3cRprStaticRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Static Ring Selection table." INDEX { h3cRprStaticRSIfIndex, h3cRprStaticRSMacAddress } ::= { h3cRprStaticRSTable 1 } H3cRprStaticRSEntry ::= SEQUENCE { h3cRprStaticRSIfIndex InterfaceIndex, h3cRprStaticRSMacAddress MacAddress, h3cRprStaticRSRingletID H3cRprRingletID, h3cRprStaticRSTtl INTEGER, h3cRprStaticRSValid TruthValue, h3cRprStaticRSRowStatus RowStatus } h3cRprStaticRSIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprStaticRSEntry 1 } h3cRprStaticRSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the station on the ring." ::= { h3cRprStaticRSEntry 2 } h3cRprStaticRSRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-create STATUS current DESCRIPTION "The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner." ::= { h3cRprStaticRSEntry 3 } h3cRprStaticRSTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station by the selected ringlet." ::= { h3cRprStaticRSEntry 4 } h3cRprStaticRSValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid." ::= { h3cRprStaticRSEntry 5 } h3cRprStaticRSRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. The status includes createAndGo, active and destroy." ::= { h3cRprStaticRSEntry 6 } -- The RPR Ipv4 dynamic ring selection table h3cRprIpv4DynamicRSTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprIpv4DynamicRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path." ::= { h3cRprRS 2 } h3cRprIpv4DynamicRSEntry OBJECT-TYPE SYNTAX H3cRprIpv4DynamicRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Ipv4Dynamic Ring Selection Table." INDEX { h3cRprIpv4DynamicRSIfIndex, h3cRprIpv4DynamicRSMacAddress } ::= { h3cRprIpv4DynamicRSTable 1 } H3cRprIpv4DynamicRSEntry ::= SEQUENCE { h3cRprIpv4DynamicRSIfIndex InterfaceIndex, h3cRprIpv4DynamicRSMacAddress MacAddress, h3cRprIpv4DynamicRSRingletID H3cRprRingletID, h3cRprIpv4DynamicRSTtl INTEGER } h3cRprIpv4DynamicRSIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprIpv4DynamicRSEntry 1 } h3cRprIpv4DynamicRSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv4 MAC address of destination station on the ring." ::= { h3cRprIpv4DynamicRSEntry 2 } h3cRprIpv4DynamicRSRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the ring which frames are sent from the source station to the destination station." ::= { h3cRprIpv4DynamicRSEntry 3 } h3cRprIpv4DynamicRSTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station by the selected ringlet." ::= { h3cRprIpv4DynamicRSEntry 4 } -- The RPR Ipv6 dynamic ring selection table h3cRprIpv6DynamicRSTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprIpv6DynamicRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection." ::= { h3cRprRS 3 } h3cRprIpv6DynamicRSEntry OBJECT-TYPE SYNTAX H3cRprIpv6DynamicRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Ipv6 Ring Selection Table." INDEX { h3cRprIpv6DynamicRSIfIndex, h3cRprIpv6DynamicRSMacAddress } ::= { h3cRprIpv6DynamicRSTable 1 } H3cRprIpv6DynamicRSEntry ::= SEQUENCE { h3cRprIpv6DynamicRSIfIndex InterfaceIndex, h3cRprIpv6DynamicRSMacAddress MacAddress, h3cRprIpv6DynamicRSRingletID H3cRprRingletID, h3cRprIpv6DynamicRSTtl INTEGER } h3cRprIpv6DynamicRSIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprIpv6DynamicRSEntry 1 } h3cRprIpv6DynamicRSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 MAC address of the destination station on the ring." ::= { h3cRprIpv6DynamicRSEntry 2 } h3cRprIpv6DynamicRSRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the ring which frames are sent from the source station to the destination station." ::= { h3cRprIpv6DynamicRSEntry 3 } h3cRprIpv6DynamicRSTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station by selected ringlet." ::= { h3cRprIpv6DynamicRSEntry 4 } -- The RPR Ipv4 overall ring selection table h3cRprIpv4OverallRSTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprIpv4OverallRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection." ::= { h3cRprRS 4 } h3cRprIpv4OverallRSEntry OBJECT-TYPE SYNTAX H3cRprIpv4OverallRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Overall Ring Selection Table." INDEX { h3cRprIpv4OverallRSIfIndex, h3cRprIpv4OverallRSMacAddress } ::= { h3cRprIpv4OverallRSTable 1 } H3cRprIpv4OverallRSEntry ::= SEQUENCE { h3cRprIpv4OverallRSIfIndex InterfaceIndex, h3cRprIpv4OverallRSMacAddress MacAddress, h3cRprIpv4OverallRSType INTEGER, h3cRprIpv4OverallRSRingletID H3cRprRingletID, h3cRprIpv4OverallRSTtl INTEGER } h3cRprIpv4OverallRSIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprIpv4OverallRSEntry 1 } h3cRprIpv4OverallRSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the destination station on the ring." ::= { h3cRprIpv4OverallRSEntry 2 } h3cRprIpv4OverallRSType OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ring selection item type indicates static or dynamic." ::= { h3cRprIpv4OverallRSEntry 3 } h3cRprIpv4OverallRSRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the ring which frames are sent from the source station to the destination station." ::= { h3cRprIpv4OverallRSEntry 4 } h3cRprIpv4OverallRSTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station by selected ringlet." ::= { h3cRprIpv4OverallRSEntry 5 } -- The RPR VRRP ring selection table h3cRprVrrpRSTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprVrrpRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured." ::= { h3cRprRS 5 } h3cRprVrrpRSEntry OBJECT-TYPE SYNTAX H3cRprVrrpRSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR VRRP Ring Selection Table." INDEX { h3cRprVrrpRSIfIndex, h3cRprVrrpRSVirtualMacAddress } ::= { h3cRprVrrpRSTable 1 } H3cRprVrrpRSEntry ::= SEQUENCE { h3cRprVrrpRSIfIndex InterfaceIndex, h3cRprVrrpRSVirtualMacAddress MacAddress, h3cRprVrrpRSMacAddress MacAddress, h3cRprVrrpRSRingletID H3cRprRingletID, h3cRprVrrpRSTtl INTEGER } h3cRprVrrpRSIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprVrrpRSEntry 1 } h3cRprVrrpRSVirtualMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The virtual MAC address of the staion in VRRP group." ::= { h3cRprVrrpRSEntry 2 } h3cRprVrrpRSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the station that is the master in VRRP group." ::= { h3cRprVrrpRSEntry 3 } h3cRprVrrpRSRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the ring which frames are sent from the source station to the destination station." ::= { h3cRprVrrpRSEntry 4 } h3cRprVrrpRSTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station by selected ringlet." ::= { h3cRprVrrpRSEntry 5 } -- The RPR default ring identifier config Table h3cRprDefaultRingIDTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprDefaultRingIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Default RingID Table specify the default ringID." ::= { h3cRprRS 6 } h3cRprDefaultRingIDEntry OBJECT-TYPE SYNTAX H3cRprDefaultRingIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Default RingID Table." INDEX { h3cRprDefaultRingIDIfIndex } ::= { h3cRprDefaultRingIDTable 1 } H3cRprDefaultRingIDEntry ::= SEQUENCE { h3cRprDefaultRingIDIfIndex InterfaceIndex, h3cRprDefaultConfigRingletID H3cRprRingletID, h3cRprDefaultActiveRingID H3cRprRingletID } h3cRprDefaultRingIDIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprDefaultRingIDEntry 1 } h3cRprDefaultConfigRingletID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-write STATUS current DESCRIPTION "The default identifier of the ring configured by user." ::= { h3cRprDefaultRingIDEntry 2 } h3cRprDefaultActiveRingID OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the default ring which is active currently. The default ring configured by user may be inactive." ::= { h3cRprDefaultRingIDEntry 3 } -- The RPR defect report table h3cRprDefect OBJECT IDENTIFIER ::= { h3cRprObjects 5 } h3cRprDefectReportTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprDefectReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Defect Report Table that contains the trap information on the ring." ::= { h3cRprDefect 1 } h3cRprDefectReportEntry OBJECT-TYPE SYNTAX H3cRprDefectReportEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Defect Report Table." INDEX { h3cRprDefectIfIndex } ::= { h3cRprDefectReportTable 1 } H3cRprDefectReportEntry ::= SEQUENCE { h3cRprDefectIfIndex InterfaceIndex, h3cRprDefectCurrentStatus BITS } h3cRprDefectIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprDefectReportEntry 1 } h3cRprDefectCurrentStatus OBJECT-TYPE SYNTAX BITS { topologyOpenRing(0), topoInstability(1), topoInconsistent(2), dulpMacAddress(3), dulpIPAddress(4), lrttDefect(5), protCfgDefect(6), jumboCfgDefect(7), excessReservedRateDefect(8), excessMaxStationNum(9), miscabling(10), backPressure(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring." REFERENCE "IEEE 802.17 V3.3 Subclause 11.2.9." ::= { h3cRprDefectReportEntry 2 } -- The priority to RPR service class map table h3cRprPriorityMap OBJECT IDENTIFIER ::= { h3cRprObjects 6 } h3cRprPriority2ClassMapTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprPriority2ClassMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Table is for Class Of Service and RPR Service Class Mapping." ::= { h3cRprPriorityMap 1 } h3cRprPriority2ClassMapEntry OBJECT-TYPE SYNTAX H3cRprPriority2ClassMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the COS to Service Class Map Table." INDEX { h3cRprPriority2ClassMapIfIndex, h3cRprPriority2ClassMapType, h3cRprPriorityValue } ::= { h3cRprPriority2ClassMapTable 1 } H3cRprPriority2ClassMapEntry ::= SEQUENCE { h3cRprPriority2ClassMapIfIndex InterfaceIndex, h3cRprPriority2ClassMapType INTEGER, h3cRprPriorityValue INTEGER, h3cRprPriority2ClassMap H3cRprServiceClass } h3cRprPriority2ClassMapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprPriority2ClassMapEntry 1 } h3cRprPriority2ClassMapType OBJECT-TYPE SYNTAX INTEGER { tag(1), mpls(2), ip(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Priority,include tag, mpls, ip." ::= { h3cRprPriority2ClassMapEntry 2 } h3cRprPriorityValue OBJECT-TYPE SYNTAX INTEGER { pri0(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority of tag,mpls and ip, the value range is 0~7." ::= { h3cRprPriority2ClassMapEntry 3 } h3cRprPriority2ClassMap OBJECT-TYPE SYNTAX H3cRprServiceClass MAX-ACCESS read-write STATUS current DESCRIPTION "The RPR service class." REFERENCE "IEEE 802.17 V3.3 Subclause 7.3 Service class." ::= { h3cRprPriority2ClassMapEntry 4 } -- The RPR rate-limit config table h3cRprRateLimitConfig OBJECT IDENTIFIER ::= { h3cRprObjects 7 } h3cRprRateLimitConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprRateLimitConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class." ::= { h3cRprRateLimitConfig 1 } h3cRprRateLimitConfigEntry OBJECT-TYPE SYNTAX H3cRprRateLimitConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Rate Limit Configuration Table." INDEX { h3cRprRateLimitConfigIfIndex, h3cRprRateLimitConfigRingletId, h3cRprRateLimitConfigServiceClass } ::= { h3cRprRateLimitConfigTable 1 } H3cRprRateLimitConfigEntry ::= SEQUENCE { h3cRprRateLimitConfigIfIndex InterfaceIndex, h3cRprRateLimitConfigRingletId H3cRprRingletID, h3cRprRateLimitConfigServiceClass H3cRprServiceClass, h3cRprRateLimitConfigValue Integer32 } h3cRprRateLimitConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprRateLimitConfigEntry 1 } h3cRprRateLimitConfigRingletId OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the ring of RPR ringlet." ::= { h3cRprRateLimitConfigEntry 2 } h3cRprRateLimitConfigServiceClass OBJECT-TYPE SYNTAX H3cRprServiceClass MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR service class." REFERENCE "IEEE 802.17 V3.3 Subclause 7.3 Service class." ::= { h3cRprRateLimitConfigEntry 3 } h3cRprRateLimitConfigValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of rate-limit that configured for diffrent service class. The unit is permillage." ::= { h3cRprRateLimitConfigEntry 4 } -- The RPR mac address learning config table h3cRprMacAddrLearn OBJECT IDENTIFIER ::= { h3cRprObjects 8 } h3cRprMacLearnCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprMacLearnCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR MAC Address Table." ::= { h3cRprMacAddrLearn 1 } h3cRprMacLearnCfgEntry OBJECT-TYPE SYNTAX H3cRprMacLearnCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of RPR MAC Address Table." INDEX { h3cRprMacLearnIfIndex, h3cRprMacLearnRprMac } ::= { h3cRprMacLearnCfgTable 1 } H3cRprMacLearnCfgEntry ::= SEQUENCE { h3cRprMacLearnIfIndex InterfaceIndex, h3cRprMacLearnRprMac MacAddress, h3cRprMacLearnType INTEGER, h3cRprMacLearnDestMac MacAddress, h3cRprMacLearnVlanId Integer32, h3cRprMacLearnRinglet H3cRprRingletID, h3cRprMacLearnTtl INTEGER, h3cRprMacLearnIsValid TruthValue, h3cRprMacLearnRowStatus RowStatus } h3cRprMacLearnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of RPR interface." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprMacLearnCfgEntry 1 } h3cRprMacLearnRprMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC address of the RPR station." ::= { h3cRprMacLearnCfgEntry 2 } h3cRprMacLearnType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The type of MAC address item that the user built. The type includes static and dynamic." ::= { h3cRprMacLearnCfgEntry 3 } h3cRprMacLearnDestMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination of MAC address." ::= { h3cRprMacLearnCfgEntry 4 } h3cRprMacLearnVlanId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan ID that the MAC address learned from by RPR staion." ::= { h3cRprMacLearnCfgEntry 5 } h3cRprMacLearnRinglet OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS read-create STATUS current DESCRIPTION "The identifier of the ring which frames are sent from the source station to the destination station." ::= { h3cRprMacLearnCfgEntry 6 } h3cRprMacLearnTtl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The hops from source station to destination station on the selected ringlet." ::= { h3cRprMacLearnCfgEntry 7 } h3cRprMacLearnIsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid." ::= { h3cRprMacLearnCfgEntry 8 } h3cRprMacLearnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. The status includes createAndGo, active and destroy." ::= { h3cRprMacLearnCfgEntry 9 } -- The RPR table for trap h3cRprTrapVar OBJECT IDENTIFIER ::= { h3cRprObjects 9 } h3cRprTrapVarTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cRprTrapVarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RPR Defect Report Table that contains varible that used to bind in trap." ::= { h3cRprTrapVar 1 } h3cRprTrapVarEntry OBJECT-TYPE SYNTAX H3cRprTrapVarEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the RPR Trap Var Table." INDEX { h3cRprTrapIfIndex } ::= { h3cRprTrapVarTable 1 } H3cRprTrapVarEntry ::= SEQUENCE { h3cRprTrapIfIndex InterfaceIndex, h3cRprTrapRinglet H3cRprRingletID, h3cRprTrapTopoMacAddress MacAddress, h3cRprTrapIpAddress InetAddress } h3cRprTrapIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The ifIndex of RPR interface. It is only used for trap to bind." REFERENCE "RFC 2863, ifIndex" ::= { h3cRprTrapVarEntry 1 } h3cRprTrapRinglet OBJECT-TYPE SYNTAX H3cRprRingletID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The span of RPR station. It is only used for trap to bind." ::= { h3cRprTrapVarEntry 2 } h3cRprTrapTopoMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The MAC address of RPR station. It is only used for trap to bind." ::= { h3cRprTrapVarEntry 3 } h3cRprTrapIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of RPR station. It is only used for trap to bind." ::= { h3cRprTrapVarEntry 4 } -- The RPR Traps h3cRprTrap OBJECT IDENTIFIER ::= { h3cRprObjects 10 } h3cRprTopologyOpenRing NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapRinglet } STATUS current DESCRIPTION "The topology openRing trap indicates that the RPR ring is opened." REFERENCE "IEEE 802.17 Subclause 3.2.77 open ring." ::= { h3cRprTrap 1 } h3cRprTopologyCloseRing NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapRinglet } STATUS current DESCRIPTION "The topology openRing trap indicates that the RPR ring is closed." REFERENCE "IEEE 802.17 Subclause 3.2.77 close ring." ::= { h3cRprTrap 2 } h3cRprTopologyInconsistent NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The topology inconsistent trap indicates that the topology of RPR is inconsistent." REFERENCE "IEEE 802.17 Subclause 11.6.6.1 topology consistency." ::= { h3cRprTrap 3 } h3cRprTopologyInstability NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The topology instability trap indicates that the topology of RPR is instability." ::= { h3cRprTrap 4 } h3cRprDuplicateMacAddress NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapTopoMacAddress } STATUS current DESCRIPTION "The duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring." ::= { h3cRprTrap 5 } h3cRprDulplicateIPAddress NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapIpAddress } STATUS current DESCRIPTION "The dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring." ::= { h3cRprTrap 6 } h3cRprIncompleteLRTT NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The incomplete LRTT trap indicates that LRTT is not completed." ::= { h3cRprTrap 7 } h3cRprProtecConfigInconsistent NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode." ::= { h3cRprTrap 8 } h3cRprJumboConfigInconsistent NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame." ::= { h3cRprTrap 9 } h3cRprExceedMaxReservRate NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex,h3cRprTrapRinglet } STATUS current DESCRIPTION "The exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum." ::= { h3cRprTrap 10 } h3cRprExceedMaxStationNum NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex } STATUS current DESCRIPTION "The exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number." ::= { h3cRprTrap 11 } h3cRprMiscabling NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex,h3cRprTrapRinglet } STATUS current DESCRIPTION "The miscabling trap indicates that the miscabling event occurred." REFERENCE "IEEE 802.17 V3.0 Subclause 11.9.2.1 miscabling defect." ::= { h3cRprTrap 12 } h3cRprBackPressure NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapRinglet, h3cRprPriority2ClassMap } STATUS current DESCRIPTION "The back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured." ::= { h3cRprTrap 13 } h3cRprBackPressureOver NOTIFICATION-TYPE OBJECTS { h3cRprTrapIfIndex, h3cRprTrapRinglet, h3cRprPriority2ClassMap } STATUS current DESCRIPTION "The back pressure over trap indicates that the backpressure is disappeared on the ringlet." ::= { h3cRprTrap 14 } END