-- ================================================================= -- Copyright (C) 2004 by HUAWEI 3Com TECHNOLOGIES. All rights reserved. -- -- Description:protocol vlan mib -- Reference:IEEE 802.1v clause 8.6.4 -- Version: V1.3 -- History: -- V1.0 Initial version 2004-08-18 -- V1.1 Updated version 2004-08-31 -- V1.2 2004-10-12 updated by gaolong -- Change value of H3cvProtocolVlanProtocolType from underscores to hyphens. -- Remove h3cProtocolVlanVlanId, h3cProtocolVlanProtocolIndex from h3cProtocolVlanProtocolGroup -- because they are not-accessible objects. -- Remove h3cProtocolVlanPortIndex, h3cProtocolVlanPortVlanId, h3cProtocolVlanPortProtocolId -- from h3cProtocolVlanPortGroup because they are not-accessible objects. -- V1.3 2005-08-31 updated by jiangjun -- Add h3cDifferentProtocolNumAllPort object to support the maximum -- number of different protocols that can be applied on all ports. -- Add enum value (ipv6) to H3cvProtocolVlanProtocolType. -- Update file format by gaolong. -- ================================================================= A3COM-HUAWEI-PROTOCOL-VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS h3cCommon FROM A3COM-HUAWEI-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; h3cProtocolVlan MODULE-IDENTITY LAST-UPDATED "200408311800Z" ORGANIZATION "Huawei 3Com Technology Co., Ltd." CONTACT-INFO "Platform Team Huawei 3Com Technology Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085 " DESCRIPTION "This MIB contains the objects for managing the protocol-based vlan configurations." REVISION "200408311938Z" -- August 31, 2004 at 19:38 GMT DESCRIPTION "The initial revision of this MIB module ." ::= { h3cCommon 16 } -- -- Textual conventions -- H3cvProtocolVlanProtocolType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Contains protocols both for layer3 and layer2. " SYNTAX INTEGER { -- layer 3 protocols ip(1), ipx(2), at(3), ipv6(4), --layer 2 protocols mode-llc(101), mode-snap(102), mode-ethernetii(103) } H3cvProtocolVlanProtocolSubType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " combine with H3cvProtocolVlanProtocolType. ethernetii(2), llc(3), raw(4), snap(5) are used when the value of H3cvProtocolVlanProtocolType is for layer 3 protocols. etype(6) is used when the value of H3cvProtocolVlanProtocolType is for layer 2 protocols. Detail information refers to DESCRIPTION part of h3cProtocolVlanProtocolTypeValue. " SYNTAX INTEGER { notused(1), -- this value indicates the object is not used. ethernetii(2), llc(3), raw(4), snap(5), etype(6) } -- -- Node definitions -- h3cProtocolVlanOperate OBJECT IDENTIFIER ::= { h3cProtocolVlan 1 } h3cProtocolNumAllVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of protocols that can be configured on all vlans. This number may vary with products." ::= { h3cProtocolVlanOperate 1 } h3cProtocolNumPerVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of protocols that can be configured per vlan. This number may vary with products." ::= { h3cProtocolVlanOperate 2 } h3cProtocolNumAllPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of protocols that can be applied on all ports. This number may vary with products." ::= { h3cProtocolVlanOperate 3 } h3cProtocolNumPerPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of protocols that can be applied to each port. This number may vary with products." ::= { h3cProtocolVlanOperate 4 } h3cProtocolVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Protocol-based VLAN configuration table." ::= { h3cProtocolVlanOperate 5 } h3cProtocolVlanEntry OBJECT-TYPE SYNTAX H3cProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Protocol-based VLAN configuration entry." INDEX { h3cProtocolVlanVlanId, h3cProtocolVlanProtocolIndex } ::= { h3cProtocolVlanTable 1 } H3cProtocolVlanEntry ::= SEQUENCE { h3cProtocolVlanVlanId Integer32, h3cProtocolVlanProtocolIndex Integer32, h3cProtocolVlanProtocolType H3cvProtocolVlanProtocolType, h3cProtocolVlanProtocolSubType H3cvProtocolVlanProtocolSubType, h3cProtocolVlanProtocolTypeValue OCTET STRING, h3cProtocolVlanRowStatus RowStatus } h3cProtocolVlanVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan ID." ::= { h3cProtocolVlanEntry 1 } h3cProtocolVlanProtocolIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol index value of a row in this table in the range of [0..h3cProtocolNumPerVlan-1]. This object may not be provided during creation. In this case, a number is assigned by system automatically." ::= { h3cProtocolVlanEntry 2 } h3cProtocolVlanProtocolType OBJECT-TYPE SYNTAX H3cvProtocolVlanProtocolType MAX-ACCESS read-create STATUS current DESCRIPTION " Specify protocol types supported by a protocol-based VLAN. Now protocols supported on layer 3 are ip, ipx, at, ipv6, etc. Now protocols supported on layer 2 are llc, snap, ethernetii, etc. For details, see description of h3cProtocolVlanProtocolTypeValue. " ::= { h3cProtocolVlanEntry 3 } h3cProtocolVlanProtocolSubType OBJECT-TYPE SYNTAX H3cvProtocolVlanProtocolSubType MAX-ACCESS read-create STATUS current DESCRIPTION " See description of h3cProtocolVlanProtocolTypeValue. " ::= { h3cProtocolVlanEntry 4 } h3cProtocolVlanProtocolTypeValue OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " The value of the configured protocol type. By default, semicolon(;) is used as a seperator between different parts in the content of the object. The relationship among h3cProtocolVlanProtocolType, h3cProtocolVlanProtocolSubType and h3cProtocolVlanProtocolTypeValue is as follows. |--------------------------------------------------------------------------------------------| | h3cProtocolVlan- | h3cProtocolVlan- | h3cProtocolVlanProtocolTypeValue | | ProtocolType | ProtocolSubType | | |------------------|------------------|------------------------------------------------------| | ip | notused | IP address with subnet mask in dotted decimal format.| | | | such as 10.10.11.12;255.255.0.0. By default,subnet | | | | mask is 255.255.255.0 . | |------------------|------------------|------------------------------------------------------| | ipv6 | notused | Zero length string | |------------------|------------------|------------------------------------------------------| | at | notused | Zero length string | |------------------|------------------|------------------------------------------------------| | ipx | ethernetii | Zero length string | | | llc | | | | raw | | | | snap | | |------------------|------------------|------------------------------------------------------| | mode-snap | notused | zero length string | | |------------------|------------------------------------------------------| | | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |------------------|------------------|------------------------------------------------------| | mode-ethernetii | notused | zero length string | | |------------------|------------------------------------------------------| | | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |------------------|------------------|------------------------------------------------------| | mode-llc | notused | the sequence of different parts is as follows. | | | | [dsap value][;ssap value][dsap value;ssap value] | | | | Both range is [0x00..0xff] | | | | | | | | For example. Suppose value of dsap and ssap are 0x09 | | | | and 0x0a. | | | | If neither dsap or ssap, the string length is zero. | | | | If dsap provided, the string is '09;' or '09' | | | | If ssap provided, the value is ';0a' | | | | If dsap and ssap provided, the value is '09;0a' | |------------------|------------------|------------------------------------------------------| " ::= { h3cProtocolVlanEntry 5 } h3cProtocolVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this table." ::= { h3cProtocolVlanEntry 6 } h3cProtocolVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cProtocolVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protocol-based VLAN port information table. h3cProtocolVlanPortVlanId refers to h3cProtocolVlanVlanId in h3cProtocolVlanTable. h3cProtocolVlanPortProtocolId refers to h3cProtocolVlanProtocolIndex in h3cProtocolVlanTable. So if the value of h3cProtocolVlanPortVlanId and h3cProtocolVlanPortProtocolId have no corresponding entry in h3cProtocolVlanTable, set operation for this table will fail. Only hybrid ports are supported by this table. Only untagged packets are supported by this table. " ::= { h3cProtocolVlanOperate 6 } h3cProtocolVlanPortEntry OBJECT-TYPE SYNTAX H3cProtocolVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Protocol-based VLAN port information entry. " INDEX { h3cProtocolVlanPortIndex, h3cProtocolVlanPortVlanId, h3cProtocolVlanPortProtocolId } ::= { h3cProtocolVlanPortTable 1 } H3cProtocolVlanPortEntry ::= SEQUENCE { h3cProtocolVlanPortIndex Integer32, h3cProtocolVlanPortVlanId Integer32, h3cProtocolVlanPortProtocolId Integer32, h3cProtocolVlanPortProtocolType H3cvProtocolVlanProtocolType, h3cProtocolVlanPortProtocolSubType H3cvProtocolVlanProtocolSubType, h3cProtocolVlanPortTypeValue OCTET STRING, h3cProtocolVlanPortRowStatus RowStatus } h3cProtocolVlanPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The maximum number is the total number of the ports supported by device. " REFERENCE "hwLswPortIndex in A3COM-HUAWEI-DEVICE-MIB" ::= { h3cProtocolVlanPortEntry 1 } h3cProtocolVlanPortVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol-based VLAN ID." ::= { h3cProtocolVlanPortEntry 2 } h3cProtocolVlanPortProtocolId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol index." ::= { h3cProtocolVlanPortEntry 3 } h3cProtocolVlanPortProtocolType OBJECT-TYPE SYNTAX H3cvProtocolVlanProtocolType MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the description of h3cProtocolVlanProtocolType." ::= { h3cProtocolVlanPortEntry 4 } h3cProtocolVlanPortProtocolSubType OBJECT-TYPE SYNTAX H3cvProtocolVlanProtocolSubType MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the description of h3cProtocolVlanProtocolSubType." ::= { h3cProtocolVlanPortEntry 5 } h3cProtocolVlanPortTypeValue OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Refer to the description of h3cProtocolVlanProtocolTypeValue." ::= { h3cProtocolVlanPortEntry 6 } h3cProtocolVlanPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this table." ::= { h3cProtocolVlanPortEntry 7 } h3cDifferentProtocolNumAllPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of different protocols that can be applied to all ports." ::= { h3cProtocolVlanOperate 7 } h3cProtocolVlanConformance OBJECT IDENTIFIER ::= { h3cProtocolVlan 2 } h3cProtocolVlanCompliances OBJECT IDENTIFIER ::= { h3cProtocolVlanConformance 1 } h3cProtocolVlanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for protocol vlan MIB." MODULE -- this module MANDATORY-GROUPS { h3cProtocolVlanOperateGroup, h3cProtocolVlanProtocolGroup, h3cProtocolVlanPortGroup } ::= { h3cProtocolVlanCompliances 1 } h3cProtocolVlanGroups OBJECT IDENTIFIER ::= { h3cProtocolVlanConformance 2 } h3cProtocolVlanOperateGroup OBJECT-GROUP OBJECTS { h3cProtocolNumAllVlan, h3cProtocolNumPerVlan, h3cProtocolNumAllPort, h3cProtocolNumPerPort, h3cDifferentProtocolNumAllPort } STATUS current DESCRIPTION "A group of scalar objects describing the maximum number." ::= { h3cProtocolVlanGroups 1 } h3cProtocolVlanProtocolGroup OBJECT-GROUP OBJECTS { h3cProtocolVlanProtocolType, h3cProtocolVlanProtocolSubType, h3cProtocolVlanProtocolTypeValue, h3cProtocolVlanRowStatus } STATUS current DESCRIPTION "A group of protocol vlan protocol." ::= { h3cProtocolVlanGroups 2 } h3cProtocolVlanPortGroup OBJECT-GROUP OBJECTS { h3cProtocolVlanPortProtocolType, h3cProtocolVlanPortProtocolSubType, h3cProtocolVlanPortTypeValue, h3cProtocolVlanPortRowStatus } STATUS current DESCRIPTION "A group of protocol vlan port." ::= { h3cProtocolVlanGroups 3 } END