-- ============================================================================ -- Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: The purpose of this MIB file is to provide the definition of -- the MAC Information general configuration. -- Reference: -- Version: V1.1 -- History: -- V1.0 2007-12-28 -- Initial version, created by gejianzhuang -- V1.1 2009-08-13 -- Add 'h3cMACInformationTrapObjectsExt' by gejianzhuang -- ============================================================================ A3COM-HUAWEI-MAC-INFORMATION-MIB DEFINITIONS ::= BEGIN IMPORTS h3cCommon FROM A3COM-HUAWEI-OID-MIB Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC ifIndex FROM IF-MIB; -- Node definitions h3cMACInformation MODULE-IDENTITY LAST-UPDATED "200712281912Z" -- DEC 28, 2007 at 19:12 GMT ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085" DESCRIPTION "This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device." REVISION "200712281912Z" DESCRIPTION "The initial version of this MIB file." ::= { h3cCommon 87 } H3cMACInfoWorkMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The working mode of the MAC Information feature." SYNTAX INTEGER { trap(1), syslog(2) } h3cMACInformationObjects OBJECT IDENTIFIER ::= { h3cMACInformation 1 } h3cMACInformationMibGlobal OBJECT IDENTIFIER ::= { h3cMACInformationObjects 1 } h3cMACInformationMIBTableTroop OBJECT IDENTIFIER ::= { h3cMACInformationObjects 2 } h3cMACInformationMibTrap OBJECT IDENTIFIER ::= { h3cMACInformationObjects 3 } h3cMACInformationMibTrapExt OBJECT IDENTIFIER ::= { h3cMACInformationObjects 4 } h3cMACInformationEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature." DEFVAL { disabled } ::= { h3cMACInformationMibGlobal 1 } h3cMACInformationcSendInterval OBJECT-TYPE SYNTAX Unsigned32(1..20000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum interval that the device generate syslogs or traps. The unit is second." DEFVAL { 1 } ::= { h3cMACInformationMibGlobal 2 } h3cMACInformationLearntMACNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MAC addresses that learnt by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACLearntEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0." ::= { h3cMACInformationMibGlobal 3 } h3cMACInformationRemovedMACNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MAC addresses that removed by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACRemovedEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0." ::= { h3cMACInformationMibGlobal 4 } h3cMACInformationTrapSendNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of traps that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to trap(1). If the h3cMACInfomationWorkMode is set to syslog(2), the object will always return 0." ::= { h3cMACInformationMibGlobal 5 } h3cMACInformationSyslogSendNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of syslogs that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to syslog(2). If the h3cMACInfomationWorkMode is set to trap(1), the object will always return 0." ::= { h3cMACInformationMibGlobal 6 } h3cMACInformationCacheLen OBJECT-TYPE SYNTAX Unsigned32(0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed." DEFVAL { 50 } ::= { h3cMACInformationMibGlobal 7 } h3cMACInfomationWorkMode OBJECT-TYPE SYNTAX H3cMACInfoWorkMode MAX-ACCESS read-write STATUS current DESCRIPTION "The working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid." ::= { h3cMACInformationMibGlobal 8} --h3cMACInfomationIfTable h3cMACInfomationIfTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cMACInfomationIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to enable or disable the MAC Information feature on interfaces." ::= { h3cMACInformationMIBTableTroop 1 } h3cMACInfomationIfEntry OBJECT-TYPE SYNTAX H3cMACInfomationIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of h3cMACInfomationIfTable." INDEX { ifIndex } ::= { h3cMACInfomationIfTable 1 } H3cMACInfomationIfEntry ::= SEQUENCE { h3cMACLearntEnable INTEGER, h3cMACRemovedEnable INTEGER } h3cMACLearntEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface." DEFVAL { disabled } ::= { h3cMACInfomationIfEntry 1 } h3cMACRemovedEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface." DEFVAL { disabled } ::= { h3cMACInfomationIfEntry 2 } -- h3cMACNotificationTrap h3cMACInformationTraps OBJECT IDENTIFIER ::= { h3cMACInformationMibTrap 0 } h3cMACInformationChangedTrap NOTIFICATION-TYPE OBJECTS { h3cMACInfoTrapIndex, h3cMACInfoTrapCount, h3cMACInfoTrapMsg } STATUS current DESCRIPTION "When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface." ::= { h3cMACInformationTraps 1 } h3cMACInformationTrapObjects OBJECT IDENTIFIER ::= { h3cMACInformationMibTrap 2 } h3cMACInfoTrapIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sequence number of trap information. When it reaches the maximum value, it should be set to 1." ::= { h3cMACInformationTrapObjects 1 } h3cMACInfoTrapCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell." ::= { h3cMACInformationTrapObjects 2 } h3cMACInfoTrapMsg OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..254)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '...'. Each cell consists of 12 octets in the format of ''. is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. is the MAC address and has size of 6 octets. is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI is the index of the interface where the MAC address is learnt or removed and has size of 2 octets." ::= { h3cMACInformationTrapObjects 3 } -- h3cMACNotificationTrapExt h3cMACInformationTrapsExt OBJECT IDENTIFIER ::= { h3cMACInformationMibTrapExt 0 } h3cMACInformationChangedTrapExt NOTIFICATION-TYPE OBJECTS { h3cMACInfoTrapVerExt, h3cMACInfoTrapIndexExt, h3cMACInfoTrapCountExt, h3cMACInfoTrapMsgExt } STATUS current DESCRIPTION "When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface." ::= { h3cMACInformationTrapsExt 1 } h3cMACInformationTrapObjectsExt OBJECT IDENTIFIER ::= { h3cMACInformationMibTrapExt 2 } h3cMACInfoTrapVerExt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The version of trap information." ::= { h3cMACInformationTrapObjectsExt 1 } h3cMACInfoTrapIndexExt OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sequence number of trap information. When it reaches the maximum value, it should be set to 1." ::= { h3cMACInformationTrapObjectsExt 2 } h3cMACInfoTrapCountExt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell." ::= { h3cMACInformationTrapObjectsExt 3 } h3cMACInfoTrapMsgExt OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..254)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '...'. Each cell consists of 14 octets in the format of ''. is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. is the MAC address and has size of 6 octets. is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI is the index of the interface where the MAC address is learnt or removed and has size of 4 octets." ::= { h3cMACInformationTrapObjectsExt 4 } END