-- ============================================================================= -- Copyright (c) 2004-2012 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: -- The file defines a MIB to provide spectrum analysis information. -- Reference: -- Version: V1.0 -- History: -- V1.0 Created by Wang Lu -- Initial version 2011-08-05 -- ============================================================================= A3COM-HUAWEI-DOT11-SA-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, DateAndTime FROM SNMPv2-TC MODULE-IDENTITY, Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI h3cDot11, H3cDot11ChannelScopeType, H3cDot11ObjectIDType, H3cDot11RadioScopeType, H3cDot11SaIntfDevType FROM A3COM-HUAWEI-DOT11-REF-MIB; h3cDot11Sa MODULE-IDENTITY LAST-UPDATED "201108262000Z" -- Aug 26, 2011 at 20:00 GMT ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel." REVISION "201108262000Z" DESCRIPTION "The initial revision of this MIB module." ::= { h3cDot11 13 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** h3cDot11SaCfgGroup OBJECT IDENTIFIER ::= { h3cDot11Sa 1 } h3cDot11SaStatusGroup OBJECT IDENTIFIER ::= { h3cDot11Sa 2 } h3cDot11SaNotifyGroup OBJECT IDENTIFIER ::= { h3cDot11Sa 3 } -- cfg table h3cDot11SaCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11SaCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure spectrum analysis." ::= { h3cDot11SaCfgGroup 1 } h3cDot11SaCfgEntry OBJECT-TYPE SYNTAX H3cDot11SaCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the spectrum analysis configuration." INDEX { h3cDot11SaCfgRadioType } ::= { h3cDot11SaCfgTable 1 } H3cDot11SaCfgEntry ::= SEQUENCE { h3cDot11SaCfgRadioType INTEGER, h3cDot11SaEnable TruthValue, h3cDot11SaRptDevType BITS, h3cDot11SaTrapDevEnable TruthValue, h3cDot11SaTrapDevType BITS, h3cDot11SaTrapAQEnable TruthValue, h3cDot11SaTrapAQThreshold Integer32, h3cDot11SaDrivenRRMEnable TruthValue, h3cDot11SaDrivenRRMSnt INTEGER } h3cDot11SaCfgRadioType OBJECT-TYPE SYNTAX INTEGER { dot11bg(1), dot11a(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio type of the configuration." ::= { h3cDot11SaCfgEntry 1 } h3cDot11SaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether spectrum analysis is enabled globally." ::= { h3cDot11SaCfgEntry 2 } h3cDot11SaRptDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which types of interference devices should be reported." ::= { h3cDot11SaCfgEntry 3 } h3cDot11SaTrapDevEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the interference device trap is enabled." ::= { h3cDot11SaCfgEntry 4 } h3cDot11SaTrapDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which types of interference device will send traps when the interference device trap is enabled." ::= { h3cDot11SaCfgEntry 5 } h3cDot11SaTrapAQEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the air quality trap is enabled." ::= { h3cDot11SaCfgEntry 6 } h3cDot11SaTrapAQThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent." ::= { h3cDot11SaCfgEntry 7 } h3cDot11SaDrivenRRMEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure whether to trigger RRM to run when an access point detects a certain level of interference." ::= { h3cDot11SaCfgEntry 8 } h3cDot11SaDrivenRRMSnt OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity." ::= { h3cDot11SaCfgEntry 9 } -- fft table h3cDot11SaRtFFTDataTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11SaRtFFTDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the real-time FFT data for spectrum analysis." ::= { h3cDot11SaStatusGroup 1 } h3cDot11SaRtFFTDataEntry OBJECT-TYPE SYNTAX H3cDot11SaRtFFTDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the real-time FFT data for spectrum analysis." INDEX { h3cDot11SaAPID, h3cDot11SaRadioID, h3cDot11SaRtDataGroupID, h3cDot11SaFrequency } ::= { h3cDot11SaRtFFTDataTable 1 } H3cDot11SaRtFFTDataEntry ::= SEQUENCE { h3cDot11SaAPID H3cDot11ObjectIDType, h3cDot11SaRadioID H3cDot11RadioScopeType, h3cDot11SaRtDataGroupID Integer32, h3cDot11SaFrequency Integer32, h3cDot11SaRtFreqPower Integer32, h3cDot11SaRtFreqMaxPower Integer32, h3cDot11SaRtFreqDutyCycle Integer32, h3cDot11SaRtFreqDataSeqNo Unsigned32 } h3cDot11SaAPID OBJECT-TYPE SYNTAX H3cDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the serial ID of the AP." ::= { h3cDot11SaRtFFTDataEntry 1 } h3cDot11SaRadioID OBJECT-TYPE SYNTAX H3cDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of the radio." ::= { h3cDot11SaRtFFTDataEntry 2 } h3cDot11SaRtDataGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval." ::= { h3cDot11SaRtFFTDataEntry 3 } h3cDot11SaFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the frequency number in 100 Hz." ::= { h3cDot11SaRtFFTDataEntry 4 } h3cDot11SaRtFreqPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the power of the frequency point." ::= { h3cDot11SaRtFFTDataEntry 5 } h3cDot11SaRtFreqMaxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the max power of the frequency point." ::= { h3cDot11SaRtFFTDataEntry 6 } h3cDot11SaRtFreqDutyCycle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the duty cycle of the frequency point." ::= { h3cDot11SaRtFFTDataEntry 7 } h3cDot11SaRtFreqDataSeqNo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the sequence number of the data." ::= { h3cDot11SaRtFFTDataEntry 8 } -- interfering device table h3cDot11SaIntfDevTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11SaIntfDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information of the interfering devices." ::= { h3cDot11SaStatusGroup 2 } h3cDot11SaIntfDevEntry OBJECT-TYPE SYNTAX H3cDot11SaIntfDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the information of the interfering devices." INDEX { h3cDot11SaAPID, h3cDot11SaRadioID, h3cDot11SaDevID } ::= { h3cDot11SaIntfDevTable 1 } H3cDot11SaIntfDevEntry ::= SEQUENCE { h3cDot11SaDevID Integer32, h3cDot11SaDevType H3cDot11SaIntfDevType, h3cDot11SaDevSI Integer32, h3cDot11SaDevRSSI Integer32, h3cDot11SaDevDutyCycle Integer32, h3cDot11SaDevAffectedChls OCTET STRING, h3cDot11SaDevDetectedTime DateAndTime } h3cDot11SaDevID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the device identification number that uniquely identified the interfering device." ::= { h3cDot11SaIntfDevEntry 1 } h3cDot11SaDevType OBJECT-TYPE SYNTAX H3cDot11SaIntfDevType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents type of the interferer." ::= { h3cDot11SaIntfDevEntry 2 } h3cDot11SaDevSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe)." ::= { h3cDot11SaIntfDevEntry 3 } h3cDot11SaDevRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents receive signal strength indicator (RSSI) of interfering device." ::= { h3cDot11SaIntfDevEntry 4 } h3cDot11SaDevDutyCycle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents proportion of time in percentage during which the interfering device was active." ::= { h3cDot11SaIntfDevEntry 5 } h3cDot11SaDevAffectedChls OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents channels that the interfering device affects." ::= { h3cDot11SaIntfDevEntry 6 } h3cDot11SaDevDetectedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents time at which the interference was detected." ::= { h3cDot11SaIntfDevEntry 7 } -- air quality table h3cDot11SaAirQualityTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11SaAirQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the air quality of the channels." ::= { h3cDot11SaStatusGroup 3 } h3cDot11SaAirQualityEntry OBJECT-TYPE SYNTAX H3cDot11SaAirQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the air quality of the channels." INDEX { h3cDot11SaAPID, h3cDot11SaRadioID, h3cDot11SaChlNum } ::= { h3cDot11SaAirQualityTable 1 } H3cDot11SaAirQualityEntry ::= SEQUENCE { h3cDot11SaChlNum H3cDot11ChannelScopeType, h3cDot11SaAvgQuality Integer32, h3cDot11SaMinQuality Integer32, h3cDot11SaIntfDevNum Integer32, h3cDot11SaWiFiUtil Integer32, h3cDot11SaNonWiFiUtil Integer32, h3cDot11SaNoiseFloor Integer32 } h3cDot11SaChlNum OBJECT-TYPE SYNTAX H3cDot11ChannelScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio channel where the air quality is monitored." ::= { h3cDot11SaAirQualityEntry 1 } h3cDot11SaAvgQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the average air quality for this radio channel." ::= { h3cDot11SaAirQualityEntry 2 } h3cDot11SaMinQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the minimum air quality for this radio channel." ::= { h3cDot11SaAirQualityEntry 3 } h3cDot11SaIntfDevNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band." ::= { h3cDot11SaAirQualityEntry 4 } h3cDot11SaWiFiUtil OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the percentage of the channel currently being used by Wi-Fi devices." ::= { h3cDot11SaAirQualityEntry 5 } h3cDot11SaNonWiFiUtil OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the percentage of the channel currently being used by non-Wi-Fi interference." ::= { h3cDot11SaAirQualityEntry 6 } h3cDot11SaNoiseFloor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents current noise floor recorded on the channel." ::= { h3cDot11SaAirQualityEntry 7 } --Notify Group h3cDot11SaTraps OBJECT IDENTIFIER ::= { h3cDot11SaNotifyGroup 0 } h3cDot11SaIntfDevDetected NOTIFICATION-TYPE OBJECTS { h3cDot11SaTrapAPID, h3cDot11SaTrapRadioID, h3cDot11SaTrapDevID, h3cDot11SaTrapIntfDevType, h3cDot11APTrapDevSI, h3cDot11SaTrapDevRSSI, h3cDot11APTrapDevDC, h3cDot11APTrapDevChls, h3cDot11APTrapDevDctTime } STATUS current DESCRIPTION "Interfering device is detected." ::= { h3cDot11SaTraps 1 } h3cDot11SaIntfDevDisappear NOTIFICATION-TYPE OBJECTS { h3cDot11SaTrapAPID, h3cDot11SaTrapRadioID, h3cDot11SaTrapDevID, h3cDot11SaTrapIntfDevType } STATUS current DESCRIPTION "Interfering device disappeared." ::= { h3cDot11SaTraps 2 } h3cDot11SaChlQltLow NOTIFICATION-TYPE OBJECTS { h3cDot11SaTrapAPID, h3cDot11SaTrapRadioID, h3cDot11SaTrapChlNum, h3cDot11SaTrapChlQlt, h3cDot11SaTrapChlIntfNum } STATUS current DESCRIPTION "The quality of the channel is below the specified threshold." ::= { h3cDot11SaTraps 3 } h3cDot11SaChlQltRecover NOTIFICATION-TYPE OBJECTS { h3cDot11SaTrapAPID, h3cDot11SaTrapRadioID, h3cDot11SaTrapChlNum, h3cDot11SaTrapChlQlt, h3cDot11SaTrapChlIntfNum } STATUS current DESCRIPTION "The quality of the channel recovered from low status." ::= { h3cDot11SaTraps 4 } h3cDot11SaTrapVars OBJECT IDENTIFIER ::= { h3cDot11SaNotifyGroup 1 } h3cDot11SaTrapAPID OBJECT-TYPE SYNTAX H3cDot11ObjectIDType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the identifier of the AP." ::= { h3cDot11SaTrapVars 1 } h3cDot11SaTrapRadioID OBJECT-TYPE SYNTAX H3cDot11RadioScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the identifier of the radio." ::= { h3cDot11SaTrapVars 2 } h3cDot11SaTrapDevID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the device identification number that uniquely identified the interfering device." ::= { h3cDot11SaTrapVars 3 } h3cDot11SaTrapIntfDevType OBJECT-TYPE SYNTAX H3cDot11SaIntfDevType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents type of the interferer." ::= { h3cDot11SaTrapVars 4 } h3cDot11APTrapDevSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe)." ::= { h3cDot11SaTrapVars 5 } h3cDot11SaTrapDevRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents receive signal strength indicator (RSSI) of interfering device." ::= { h3cDot11SaTrapVars 6 } h3cDot11APTrapDevDC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents proportion of time in percentage during which the interfering device was active." ::= { h3cDot11SaTrapVars 7 } h3cDot11APTrapDevChls OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents channels that the interfering device affects." ::= { h3cDot11SaTrapVars 8 } h3cDot11APTrapDevDctTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents time at which the interference was detected." ::= { h3cDot11SaTrapVars 9 } h3cDot11SaTrapChlNum OBJECT-TYPE SYNTAX H3cDot11ChannelScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the radio channel where the air quality is monitored." ::= { h3cDot11SaTrapVars 10 } h3cDot11SaTrapChlQlt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the quality for this radio channel." ::= { h3cDot11SaTrapVars 11 } h3cDot11SaTrapChlIntfNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band." ::= { h3cDot11SaTrapVars 12 } END