-- ========================================================================== -- Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: The purpose of this MIB file is to provide object definition -- of WLAN radio resource management (RRM). -- Reference: -- Version: V1.5 -- History: -- V1.0 2008-07-16 Initial version, created by ChenWei -- V1.1 2009-04-16 modified by WangChunsheng -- Add new table of h3cDot11MonitorDetectedDevTable for h3cDot11MonitorDetectedGroup. -- Add new table of h3cDot11RRMAPCfgTable for h3cDot11RRMConfigGroup. -- V1.2 2009-05-07 modified by Wang Shaojie, wangchunsheng -- Add h3cDot11APInterfNumThreshhd, h3cDot11StaInterfNumThreshhd -- to h3cDot11GlobeConfigGroup. -- Modify h3cDot11RRMCfgIntrvl -- V1.3 2009-05-07 modified by Wang Shaojie -- Add new node h3cDot11MonitorDevSNR to h3cDot11MonitorDetectedDevTable -- V1.4 2010-02-22 modified by Wang Chunsheng -- Add new table h3cDot11RRMSDRadioGroupTable to h3cDot11RRMConfigGroup -- 2010-03-18 Modified by Wang Lu -- Add h3cDot11RRMAPCfg2Table -- V1.5 2010-09-21 Modified by wu xiaopeng -- Add new node h3cDot11RRMCoChlIntfTrapThhd, h3cDot11RRMAdjChlIntfTrapThhd -- to h3cDot11RRMAPCfg2Table -- V1.6 2011-03-23 Modified by NiuJian -- Add new node h3cDot11RrmNbrSSID -- to h3cDot11RRMNbrInfoTable -- ========================================================================== A3COM-HUAWEI-DOT11-RRM-MIB DEFINITIONS ::= BEGIN IMPORTS H3cDot11RadioType, H3cDot11ChannelScopeType, H3cDot11RadioElementIndex, H3cDot11RadioScopeType, h3cDot11APElementIndex FROM A3COM-HUAWEI-DOT11-REF-MIB Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, MacAddress, DateAndTime, RowStatus FROM SNMPv2-TC h3cDot11, H3cDot11ObjectIDType, H3cDot11SSIDStringType FROM A3COM-HUAWEI-DOT11-REF-MIB; h3cDot11RRM MODULE-IDENTITY LAST-UPDATED "201009251800Z" -- Sep 25, 2010 at 18:00 GMT ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R.China Http://www.h3c.com Zip: 100085" DESCRIPTION "This MIB file is to provide the object definition of WLAN radio resource management (RRM)." REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "201002231800Z" -- Feb 23, 2010 at 18:00 GMT DESCRIPTION "Modified to add new nodes." REVISION "200908012000Z" -- Aug 1, 2009 at 20:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT DESCRIPTION "Modified to add new nodes and new table." REVISION "200904172000Z" -- April 17, 2009 at 20:00 GMT DESCRIPTION "Modified to add new table and new group." REVISION "200807141429Z" DESCRIPTION "The initial revision of this MIB module." ::= { h3cDot11 8 } -- -- Node definitions -- h3cDot11RRMConfigGroup OBJECT IDENTIFIER ::= { h3cDot11RRM 1 } h3cDot11RRMGlobalCfgPara OBJECT IDENTIFIER ::= { h3cDot11RRMConfigGroup 1 } h3cDot11RRM11nMadtMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76 | 255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 255 } ::= { h3cDot11RRMGlobalCfgPara 1 } h3cDot11RRM11nSuptMaxMcs OBJECT-TYPE SYNTAX Integer32 (0..76) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates." DEFVAL { 76 } ::= { h3cDot11RRMGlobalCfgPara 2 } h3cDot11RRM11gProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dot11g protection." DEFVAL { false } ::= { h3cDot11RRMGlobalCfgPara 3 } h3cDot11RRM11aPwrConstrt OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain)." DEFVAL { 0 } ::= { h3cDot11RRMGlobalCfgPara 4 } h3cDot11RRM11aSpectrumManag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification." DEFVAL { false } ::= { h3cDot11RRMGlobalCfgPara 5 } h3cDot11RRMAutoChlAvoid11h OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected." DEFVAL { false } ::= { h3cDot11RRMGlobalCfgPara 6 } h3cDot11RRMScanChl OBJECT-TYPE SYNTAX INTEGER { auto(1), all(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned." DEFVAL { auto } ::= { h3cDot11RRMGlobalCfgPara 7 } h3cDot11RRMScanRptIntvel OBJECT-TYPE SYNTAX Integer32 (5..120) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the scan report interval." DEFVAL { 10 } ::= { h3cDot11RRMGlobalCfgPara 8 } h3cDot11APInterfNumThreshhd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately." DEFVAL { 0 } ::= { h3cDot11RRMGlobalCfgPara 9 } h3cDot11StaInterfNumThreshhd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately. " DEFVAL { 0 } ::= { h3cDot11RRMGlobalCfgPara 10 } h3cDot11RRMRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time." ::= { h3cDot11RRMConfigGroup 2 } h3cDot11RRMRadioCfgEntry OBJECT-TYPE SYNTAX H3cDot11RRMRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time." INDEX { h3cDot11RRMRadioType } ::= { h3cDot11RRMRadioCfgTable 1 } H3cDot11RRMRadioCfgEntry ::= SEQUENCE { h3cDot11RRMRadioType H3cDot11RadioType, h3cDot11RRMCfgChlState TruthValue, h3cDot11RRMCfgChlMode INTEGER, h3cDot11RRMChlProntoRadioElmt Unsigned32, h3cDot11RRMCfgPwrState TruthValue, h3cDot11RRMCfgPwrMode INTEGER, h3cDot11RRMPwrProntoRadioElmt Unsigned32, h3cDot11RRMCfgIntrvl Integer32, h3cDot11RRMCfgIntrfThres Integer32, h3cDot11RRMCfgNoiseThres Integer32, h3cDot11RRMCfgPERThres Integer32, h3cDot11RRMCfgToleranceFctr Integer32, h3cDot11RRMCfgAdjacencyFctr Integer32 } h3cDot11RRMRadioType OBJECT-TYPE SYNTAX H3cDot11RadioType MAX-ACCESS not-accessible STATUS current DESCRIPTION "802.11 radio type." ::= { h3cDot11RRMRadioCfgEntry 1 } h3cDot11RRMCfgChlState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic channel selection." DEFVAL { false } ::= { h3cDot11RRMRadioCfgEntry 2 } h3cDot11RRMCfgChlMode OBJECT-TYPE SYNTAX INTEGER { selfDecisive(1), userTriggered(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled." DEFVAL { userTriggered } ::= { h3cDot11RRMRadioCfgEntry 3 } h3cDot11RRMChlProntoRadioElmt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs." DEFVAL { 0 } ::= { h3cDot11RRMRadioCfgEntry 4 } h3cDot11RRMCfgPwrState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable dynamic power selection for the band." DEFVAL { false } ::= { h3cDot11RRMRadioCfgEntry 5 } h3cDot11RRMCfgPwrMode OBJECT-TYPE SYNTAX INTEGER { selfDecisive(1), userTriggered(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled." DEFVAL { userTriggered } ::= { h3cDot11RRMRadioCfgEntry 6 } h3cDot11RRMPwrProntoRadioElmt OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs." DEFVAL { 0 } ::= { h3cDot11RRMRadioCfgEntry 7 } h3cDot11RRMCfgIntrvl OBJECT-TYPE SYNTAX Integer32 UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the calibration interval." DEFVAL { 8 } ::= { h3cDot11RRMRadioCfgEntry 8 } h3cDot11RRMCfgIntrfThres OBJECT-TYPE SYNTAX Integer32 (40..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation." DEFVAL { 50 } ::= { h3cDot11RRMRadioCfgEntry 9 } h3cDot11RRMCfgNoiseThres OBJECT-TYPE SYNTAX Integer32 (-127..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the noise threshold." DEFVAL { -70 } ::= { h3cDot11RRMRadioCfgEntry 10 } h3cDot11RRMCfgPERThres OBJECT-TYPE SYNTAX Integer32 (10..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation." DEFVAL { 20 } ::= { h3cDot11RRMRadioCfgEntry 11 } h3cDot11RRMCfgToleranceFctr OBJECT-TYPE SYNTAX Integer32 (15..45) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user." DEFVAL { 20 } ::= { h3cDot11RRMRadioCfgEntry 12 } h3cDot11RRMCfgAdjacencyFctr OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor." DEFVAL { 3 } ::= { h3cDot11RRMRadioCfgEntry 13 } h3cDot11RRMAPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the RRM parameters for AP." ::= { h3cDot11RRMConfigGroup 3 } h3cDot11RRMAPCfgEntry OBJECT-TYPE SYNTAX H3cDot11RRMAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of RRM parameters for AP." INDEX { h3cDot11APElementIndex } ::= { h3cDot11RRMAPCfgTable 1 } H3cDot11RRMAPCfgEntry ::= SEQUENCE { h3cDot11RRMAPWorkMode INTEGER } h3cDot11RRMAPWorkMode OBJECT-TYPE SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "AP work mode." ::= { h3cDot11RRMAPCfgEntry 1 } h3cDot11RRMSDRadioGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMSDRadioGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines RRM self-decisive radio group." ::= { h3cDot11RRMConfigGroup 4 } h3cDot11RRMSDRadioGroupEntry OBJECT-TYPE SYNTAX H3cDot11RRMSDRadioGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of one RRM self-decisive radio group." INDEX { h3cDot11RRMSDRadioGroupId } ::= { h3cDot11RRMSDRadioGroupTable 1 } H3cDot11RRMSDRadioGroupEntry ::= SEQUENCE { h3cDot11RRMSDRadioGroupId Unsigned32, h3cDot11RRMSDRadioGroupDesc OCTET STRING, h3cDot11RRMSDRdGrpChlHolddownTm Unsigned32, h3cDot11RRMSDRdGrpPwrHolddownTm Unsigned32, h3cDot11RRMSDRdGroupRowStatus RowStatus } h3cDot11RRMSDRadioGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents RRM self-decisive radio group ID." ::= { h3cDot11RRMSDRadioGroupEntry 1 } h3cDot11RRMSDRadioGroupDesc OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the description of RRM self-decisive radio group." ::= { h3cDot11RRMSDRadioGroupEntry 2 } h3cDot11RRMSDRdGrpChlHolddownTm OBJECT-TYPE SYNTAX Unsigned32 UNITS "minute" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the channel holddown time of RRM self-decisive radio group." ::= { h3cDot11RRMSDRadioGroupEntry 3 } h3cDot11RRMSDRdGrpPwrHolddownTm OBJECT-TYPE SYNTAX Unsigned32 UNITS "minute" MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the power holddown time of RRM self-decisive radio group." ::= { h3cDot11RRMSDRadioGroupEntry 4 } h3cDot11RRMSDRdGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status of this table entry." ::= { h3cDot11RRMSDRadioGroupEntry 5 } h3cDot11RRMAPCfg2Table OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMAPCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the RRM parameters for AP." ::= { h3cDot11RRMConfigGroup 5 } h3cDot11RRMAPCfg2Entry OBJECT-TYPE SYNTAX H3cDot11RRMAPCfg2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of RRM parameters for AP." INDEX { h3cDot11RRMAPSerialID } ::= { h3cDot11RRMAPCfg2Table 1 } H3cDot11RRMAPCfg2Entry ::= SEQUENCE { h3cDot11RRMAPSerialID H3cDot11ObjectIDType, h3cDot11RRMAPIntfThreshold Integer32, h3cDot11RRMStaIntfThreshold Integer32, h3cDot11RRMCoChlIntfTrapThhd Integer32, h3cDot11RRMAdjChlIntfTrapThhd Integer32 } h3cDot11RRMAPSerialID OBJECT-TYPE SYNTAX H3cDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Serial ID of the AP." ::= { h3cDot11RRMAPCfg2Entry 1 } h3cDot11RRMAPIntfThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent." ::= { h3cDot11RRMAPCfg2Entry 2 } h3cDot11RRMStaIntfThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent." ::= { h3cDot11RRMAPCfg2Entry 3 } h3cDot11RRMCoChlIntfTrapThhd OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { h3cDot11RRMAPCfg2Entry 4 } h3cDot11RRMAdjChlIntfTrapThhd OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-write STATUS current DESCRIPTION "Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent." ::= { h3cDot11RRMAPCfg2Entry 5 } h3cDot11RRMDetectGroup OBJECT IDENTIFIER ::= { h3cDot11RRM 2 } h3cDot11RRMChlRptTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMChlRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows the RRM channel information of each radio on all APs." ::= { h3cDot11RRMDetectGroup 1 } h3cDot11RRMChlRptEntry OBJECT-TYPE SYNTAX H3cDot11RRMChlRptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of RRM channel information of the radio on the AP." INDEX { h3cDot11RRMRadioIndex, h3cDot11RRMChlRptChlNum } ::= { h3cDot11RRMChlRptTable 1 } H3cDot11RRMChlRptEntry ::= SEQUENCE { h3cDot11RRMRadioIndex H3cDot11RadioElementIndex, h3cDot11RRMChlRptChlNum Integer32, h3cDot11RRMChlRptChlType INTEGER, h3cDot11RRMChlRptChlQlty INTEGER, h3cDot11RRMChlRptNbrCnt Integer32, h3cDot11RRMChlRptLoad Integer32, h3cDot11RRMChlRptUtlz Integer32, h3cDot11RRMChlRptIntrf Integer32, h3cDot11RRMChlRptPER Integer32, h3cDot11RRMChlRptRetryRate Integer32, h3cDot11RRMChlRptNoise Integer32, h3cDot11RRMChlRptRadarIndtcr INTEGER } h3cDot11RRMRadioIndex OBJECT-TYPE SYNTAX H3cDot11RadioElementIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents index of the radio." ::= { h3cDot11RRMChlRptEntry 1 } h3cDot11RRMChlRptChlNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Channel number." ::= { h3cDot11RRMChlRptEntry 2 } h3cDot11RRMChlRptChlType OBJECT-TYPE SYNTAX INTEGER { primeChannel(1), offChannel(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel type." ::= { h3cDot11RRMChlRptEntry 3 } h3cDot11RRMChlRptChlQlty OBJECT-TYPE SYNTAX INTEGER { good(1), bad(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel quality." ::= { h3cDot11RRMChlRptEntry 4 } h3cDot11RRMChlRptNbrCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of neighbors found on the channel." ::= { h3cDot11RRMChlRptEntry 5 } h3cDot11RRMChlRptLoad OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Load observed on the channel in percentage." ::= { h3cDot11RRMChlRptEntry 6 } h3cDot11RRMChlRptUtlz OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Utilization of the channel in percentage." ::= { h3cDot11RRMChlRptEntry 7 } h3cDot11RRMChlRptIntrf OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Interference observed on the channel in percentage." ::= { h3cDot11RRMChlRptEntry 8 } h3cDot11RRMChlRptPER OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error rate observed on the channel in percentage." ::= { h3cDot11RRMChlRptEntry 9 } h3cDot11RRMChlRptRetryRate OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of retransmission happened on the channel." ::= { h3cDot11RRMChlRptEntry 10 } h3cDot11RRMChlRptNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise observed on the channel." ::= { h3cDot11RRMChlRptEntry 11 } h3cDot11RRMChlRptRadarIndtcr OBJECT-TYPE SYNTAX INTEGER { detected(1), notDetected(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Radar detection status." ::= { h3cDot11RRMChlRptEntry 12 } h3cDot11RRMNbrInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMNbrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows the RRM neighbor information of each radio on all APs." ::= { h3cDot11RRMDetectGroup 2 } h3cDot11RRMNbrInfoEntry OBJECT-TYPE SYNTAX H3cDot11RRMNbrInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of RRM neighbor information of the radio on an AP." INDEX { h3cDot11RRMRadioIndex, h3cDot11RrmNbrBSSID } ::= { h3cDot11RRMNbrInfoTable 1 } H3cDot11RRMNbrInfoEntry ::= SEQUENCE { h3cDot11RrmNbrBSSID MacAddress, h3cDot11RrmNbrChl H3cDot11ChannelScopeType, h3cDot11RRMNbrIntrf Integer32, h3cDot11RrmNbrRSSI Integer32, h3cDot11RrmNbrType INTEGER, h3cDot11RrmNbrSSID H3cDot11SSIDStringType } h3cDot11RrmNbrBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "MAC address of the AP." ::= { h3cDot11RRMNbrInfoEntry 1 } h3cDot11RrmNbrChl OBJECT-TYPE SYNTAX H3cDot11ChannelScopeType MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number on which the neighbor was found." ::= { h3cDot11RRMNbrInfoEntry 2 } h3cDot11RRMNbrIntrf OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Interference observed on the channel in percentage by neighbor." ::= { h3cDot11RRMNbrInfoEntry 3 } h3cDot11RrmNbrRSSI OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal strength of the AP in dBm." ::= { h3cDot11RRMNbrInfoEntry 4 } h3cDot11RrmNbrType OBJECT-TYPE SYNTAX INTEGER { managed(1), unmanaged(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of the AP, managed or unmanaged." ::= { h3cDot11RRMNbrInfoEntry 5 } h3cDot11RrmNbrSSID OBJECT-TYPE SYNTAX H3cDot11SSIDStringType MAX-ACCESS read-only STATUS current DESCRIPTION "SSID of the Neighbor." ::= { h3cDot11RRMNbrInfoEntry 6 } h3cDot11RRMHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11RRMHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters." ::= { h3cDot11RRMDetectGroup 3 } h3cDot11RRMHistoryEntry OBJECT-TYPE SYNTAX H3cDot11RRMHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry shows the details of channel and power changes." INDEX { h3cDot11RRMRadioIndex, h3cDot11RRMHistoryId, h3cDot11RRMHistoryRecIndctr } ::= { h3cDot11RRMHistoryTable 1 } H3cDot11RRMHistoryEntry ::= SEQUENCE { h3cDot11RRMHistoryId Integer32, h3cDot11RRMHistoryRecIndctr INTEGER, h3cDot11RRMHistoryChl H3cDot11ChannelScopeType, h3cDot11RRMHistoryPwr Integer32, h3cDot11RRMHistoryLoad Integer32, h3cDot11RRMHistoryUtlz Integer32, h3cDot11RRMHistoryIntrf Integer32, h3cDot11RRMHistoryNoise Integer32, h3cDot11RRMHistoryPER Integer32, h3cDot11RRMHistoryRetryRate Integer32, h3cDot11RRMHistoryChgReason BITS, h3cDot11RRMHistoryChgDateTime DateAndTime } h3cDot11RRMHistoryId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "History number of the change." ::= { h3cDot11RRMHistoryEntry 1 } h3cDot11RRMHistoryRecIndctr OBJECT-TYPE SYNTAX INTEGER { before(1), after(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "History record type of the change." ::= { h3cDot11RRMHistoryEntry 2 } h3cDot11RRMHistoryChl OBJECT-TYPE SYNTAX H3cDot11ChannelScopeType MAX-ACCESS read-only STATUS current DESCRIPTION "Channel on which the radio operates before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 3 } h3cDot11RRMHistoryPwr OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Power of the radio before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 4 } h3cDot11RRMHistoryLoad OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Load observed on the radio in percentage before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 5 } h3cDot11RRMHistoryUtlz OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Utilization of the radio in percentage before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 6 } h3cDot11RRMHistoryIntrf OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Interference observed on the radio in percentage before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 7 } h3cDot11RRMHistoryNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Noise observed on the radio before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 8 } h3cDot11RRMHistoryPER OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error rate observed on the radio in percentage before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 9 } h3cDot11RRMHistoryRetryRate OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of retransmission happened on the radio before/after the change of channel or power." ::= { h3cDot11RRMHistoryEntry 10 } h3cDot11RRMHistoryChgReason OBJECT-TYPE SYNTAX BITS { others(0), coverage(1), radar(2), retransmission(3), packetsDiscarded(4), interference(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after." ::= { h3cDot11RRMHistoryEntry 11 } h3cDot11RRMHistoryChgDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the channel or power change occurred." ::= { h3cDot11RRMHistoryEntry 12 } h3cDot11RRMNotifyGroup OBJECT IDENTIFIER ::= { h3cDot11RRM 3 } h3cDot11RRMChlQltyNotifications OBJECT IDENTIFIER ::= { h3cDot11RRMNotifyGroup 1 } h3cDot11RRMChlQltyNtfPrefix OBJECT IDENTIFIER ::= { h3cDot11RRMChlQltyNotifications 0 } h3cDot11RRMIntrfLimit NOTIFICATION-TYPE OBJECTS { h3cDot11RRMChlRptIntrf } STATUS current DESCRIPTION "This notification will be sent when interference on the radio exceeds the limit." ::= { h3cDot11RRMChlQltyNtfPrefix 1 } h3cDot11RRMPERLimit NOTIFICATION-TYPE OBJECTS { h3cDot11RRMChlRptPER } STATUS current DESCRIPTION "This notification will be sent when packet error rate on the radio exceeds the limit." ::= { h3cDot11RRMChlQltyNtfPrefix 2 } h3cDot11RRMNoiseLimit NOTIFICATION-TYPE OBJECTS { h3cDot11RRMChlRptNoise } STATUS current DESCRIPTION "This notification will be sent when noise on the radio exceeds the limit." ::= { h3cDot11RRMChlQltyNtfPrefix 3 } h3cDot11RRMResChgNotifications OBJECT IDENTIFIER ::= { h3cDot11RRMNotifyGroup 2 } h3cDot11RRMResChgNtfPrefix OBJECT IDENTIFIER ::= { h3cDot11RRMResChgNotifications 0 } h3cDot11RRMPowerChange NOTIFICATION-TYPE OBJECTS { h3cDot11RRMRadioIndex, h3cDot11NewPower, h3cDot11OldPower } STATUS current DESCRIPTION "This notification will be sent when power changed on the radio automatically." ::= { h3cDot11RRMResChgNtfPrefix 1 } h3cDot11RRMNotificationsVar OBJECT IDENTIFIER ::= { h3cDot11RRMNotifyGroup 3 } h3cDot11NewPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Power of the radio after the change of power." ::= { h3cDot11RRMNotificationsVar 1 } h3cDot11OldPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Power of the radio before the change of power." ::= { h3cDot11RRMNotificationsVar 2 } h3cDot11MonitorDetectedGroup OBJECT IDENTIFIER ::= { h3cDot11RRM 4 } h3cDot11MonitorDetectedDevTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11MonitorDetectedDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows the devices of AP detected" ::= { h3cDot11MonitorDetectedGroup 1 } h3cDot11MonitorDetectedDevEntry OBJECT-TYPE SYNTAX H3cDot11MonitorDetectedDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of detected devices." INDEX { h3cDot11MonitorDevMAC, h3cDot11APElementIndex } ::= { h3cDot11MonitorDetectedDevTable 1 } H3cDot11MonitorDetectedDevEntry ::= SEQUENCE { h3cDot11MonitorDevMAC MacAddress, h3cDot11MonitorDevType INTEGER, h3cDot11MonitorDevVendor OCTET STRING, h3cDot11MonitorDevSSID OCTET STRING, h3cDot11MonitorDevBSSID MacAddress, h3cDot11MonitorDevChannel H3cDot11ChannelScopeType, h3cDot11MonitorRadioId H3cDot11RadioScopeType, h3cDot11MonitorDevMaxRSSI Integer32, h3cDot11MonitorDevBeaconIntvl Integer32, h3cDot11MonitorDevFstDctTime DateAndTime, h3cDot11MonitorDevLstDctTime DateAndTime, h3cDot11MonitorDevClear TruthValue, h3cDot11MonitorDevSNR Integer32 } h3cDot11MonitorDevMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents MAC address of the device detected." ::= { h3cDot11MonitorDetectedDevEntry 1 } h3cDot11MonitorDevType OBJECT-TYPE SYNTAX INTEGER { client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents type of the device detected." ::= { h3cDot11MonitorDetectedDevEntry 2 } h3cDot11MonitorDevVendor OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents vendor of the detected device." ::= { h3cDot11MonitorDetectedDevEntry 3 } h3cDot11MonitorDevSSID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the service set identifier for the ESS of the device which type is ap or adhoc." ::= { h3cDot11MonitorDetectedDevEntry 4 } h3cDot11MonitorDevBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the basic service set identifier of the detected device." ::= { h3cDot11MonitorDetectedDevEntry 5 } h3cDot11MonitorDevChannel OBJECT-TYPE SYNTAX H3cDot11ChannelScopeType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels." ::= { h3cDot11MonitorDetectedDevEntry 6 } h3cDot11MonitorRadioId OBJECT-TYPE SYNTAX H3cDot11RadioScopeType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the radio ID of the AP that detected the device." ::= { h3cDot11MonitorDetectedDevEntry 7 } h3cDot11MonitorDevMaxRSSI OBJECT-TYPE SYNTAX Integer32 UNITS "dbm" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the maximum detected RSSI of the device in a scan report cycle." ::= { h3cDot11MonitorDetectedDevEntry 8 } h3cDot11MonitorDevBeaconIntvl OBJECT-TYPE SYNTAX Integer32 UNITS "millisecond" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the beacon interval for the detected device(not include the device which type is client)." ::= { h3cDot11MonitorDetectedDevEntry 9 } h3cDot11MonitorDevFstDctTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the time at which the device was first detected." ::= { h3cDot11MonitorDetectedDevEntry 10 } h3cDot11MonitorDevLstDctTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the time at which the device was detected last time." ::= { h3cDot11MonitorDetectedDevEntry 11 } h3cDot11MonitorDevClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear the information of the device detected in the WLAN. It will return false for get operation." ::= { h3cDot11MonitorDetectedDevEntry 12 } h3cDot11MonitorDevSNR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the SNR of the device in a scan report cycle." ::= { h3cDot11MonitorDetectedDevEntry 13 } END