-- ================================================================= -- Copyright (c) 2004-2012 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description:configuration management mib -- Reference: -- Version: V2.4 -- History: -- Initial version 2002-12-20 -- V1.1 24th Feb 2004 -- module imported from A3COM-HUAWEI-OID-MIB which is the root MIB MODULE. -- V1.2 14th May 2004 -- convert MIB object name from hwXXX to h3c, etc. -- V1.3 18th Aug 2004 -- modified DESCRIPTION of 'h3cCfgLogFile' by jinyi. -- V1.4 16th Sept 2004 -- modified DESCRIPTION of 'h3cCfgLogTerminalType' and 'h3cCfgLogTerminalNum' by wangyingxia -- V1.5 9th Oct 2004 -- modified DESCRIPTION of 'h3cCfgRunModifiedLast' and 'h3cCfgManEventlog' by wangrui -- V1.6 30th Nov 2004 -- modified DESCRIPTION of 'h3cCfgOperateCompletion' by wangrui -- V1.7 11th Jan 2005 -- Updated by gaolong and weixinzhe for updating description -- V1.8 26th Apr 2005 -- Updated by wangrui for added h3cCfgExecuteOperate and added ConfigOperationStateType -- modified DESCRIPTION of 'h3cCfgLogSrcData', 'h3cCfgLogDesData' and 'h3cCfgLogTerminalType' by fuzhenyu -- V1.9 6th Jun 2005 -- Add enum value in SYNTAX of h3cCfgOperateProtocol by jinyongfeng. -- V2.0 27th sept 2005 -- modified DESCRIPTION of 'h3cCfgLogSrcCmd', 'h3cCfgRunModifiedLast' and 'h3cCfgLogDesData' by lisongfeng and wangrui -- V2.1 2009-05-05 Add h3cCfgOperateServerPort, h3cCfgInvalidConfigFile by jinyi -- V2.2 2009-12-20 Add h3cCfgOperFailReason, h3cCfgReset by shuaixiaojuan -- V2.3 2010-10-30 Deprecated h3cCfgOperateServerAddress, h3cCfgLogCmdSrcAddress -- and h3cCfgLogServerAddress, -- added enum in ConfigOperationStateType, -- added h3cCfgOperateSrvAddrType, h3cCfgOperateSrvAddrRev and -- h3cCfgOperateSrvVPNName, h3cCfgLogCmdSrcAddrType, -- h3cCfgLogCmdSrcAddrRev, h3cCfgLogCmdSrcAddrVPNName, -- h3cCfgLogServerAddrType,h3cCfgLogServerAddrRev, h3cCfgLogServerAddrVPNName by songhao. -- V2.4 2011-11-26 -- Add h3cCfgFirstTrapTime by duyanbing 04404. -- ================================================================= A3COM-HUAWEI-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN IMPORTS huaweiUtility FROM A3COM-HUAWEI-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, IpAddress, Integer32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC; h3cConfig MODULE-IDENTITY LAST-UPDATED "201111260000Z" ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085" DESCRIPTION "This MIB contains objects to manage the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB." REVISION "201111260000Z" DESCRIPTION "The initial revision of this MIB module." ::= { huaweiUtility 10 } -- -- Textual conventions -- ConfigOperationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1): Update the saved configuration (startup) file used currently with the current configuration running in the system. This operation is equivalent to the [save] command from command line. If current startup configuration file does not exist, then the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Running(2): Update the current configuration running in the system with the saved configuration (startup) file used currently. The commands in the file are executed as if they had been entered via the command line. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). running2Net(3): Send the current configuration running in the system to the network using the specified file transfer protocol. net2Running(4): Update the current configuration running in the system with a remote file from the network using the specified file transfer protocol. The commands in the file are executed as if they had been entered via the command line. net2Startup(5): Download a remote file to the local system using the specified file transfer protocol and replace the saved configuration (startup) file used currently. If current startup configurationfile does not exist, the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Net(6): Send the saved configuration (startup) file used currently to the network using the specified file transfer protocol. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). " SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } ConfigOperationStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the specified operation. opInProgress : Specified operation is active. opOperationSuccess : Specified operation is supported and completed successfully. opInvalidOperation : Command invalid or command/protocol/device combination unsupported. opInvalidProtocol : Invalid protocol specified. opInvalidSourceName : Invalid source file name specified. opInvalidDestName : Invalid target name specified. opInvalidServerAddress : Invalid server address specified. opDeviceBusy : Specified device is in use and locked by another process. opDeviceOpenError : Invalid device name. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file name; file not found in partition. opFileTransferError : File transfer was unsuccessful; network failure. opFileChecksumError : File checksum in Flash failed. opNoMemory : System running low on memory. opAuthFail: Invalid user name or password. opTimeOut : File transfer was timeout. opUnknownFailure : Failure unknown. opInvalidConfigFile: Invalid configration file. opSlaveFull : Operation is fail for the slave don't have enough space. opCopyToSlaveFailure : Operation is fail when copy file to the slave. " SYNTAX INTEGER { opInProgress(1), opSuccess(2), opInvalidOperation(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeOut(18), opUnknownFailure(19), opInvalidConfigFile(20), opSlaveFull(21), opCopyToSlaveFailure(22) } -- -- Node definitions -- h3cConfigManObjects OBJECT IDENTIFIER ::= { h3cConfig 1 } h3cCfgLog OBJECT IDENTIFIER ::= { h3cConfigManObjects 1 } h3cCfgRunModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after system detects the current configuration has been changed." ::= { h3cCfgLog 1 } h3cCfgRunSavedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than h3cCfgRunModifiedLast, the current configuration has been modified but not saved." ::= { h3cCfgLog 2 } h3cCfgStartModifiedLast OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been modified by a save of the current configuration running in the system or other methods such as copy." ::= { h3cCfgLog 3 } h3cCfgLogLimitedEntries OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The object shows the maximum number of rows in h3cCfgLogTable. The value supported by the system is 10. " ::= { h3cCfgLog 4 } h3cCfgLogDeletedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of rows deleted from h3cCfgLogTable." ::= { h3cCfgLog 5 } h3cCfgLogWantBackup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Decide whether to backup the value of objects about h3cCfgLog." DEFVAL { true } ::= { h3cCfgLog 6 } -- If the value is true, the data of configuration log on the master will send to -- slave. Otherwise the data of log will be lost when master switches to -- slave. h3cCfgLogTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for logging configuration operation in device." ::= { h3cCfgLog 7 } h3cCfgLogEntry OBJECT-TYPE SYNTAX H3cCfgLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information of the entry." INDEX { h3cCfgLogIndex } ::= { h3cCfgLogTable 1 } H3cCfgLogEntry ::= SEQUENCE { h3cCfgLogIndex Integer32, h3cCfgLogTime TimeTicks, h3cCfgLogSrcCmd INTEGER, h3cCfgLogSrcData INTEGER, h3cCfgLogDesData INTEGER, h3cCfgLogTerminalType INTEGER, h3cCfgLogTerminalUser DisplayString, h3cCfgLogTerminalNum Integer32, h3cCfgLogTerminalLocation DisplayString, h3cCfgLogCmdSrcAddress IpAddress, h3cCfgLogVirHost DisplayString, h3cCfgLogUserName DisplayString, h3cCfgLogServerAddress IpAddress, h3cCfgLogFile DisplayString, h3cCfgLogCmdSrcAddrType InetAddressType, h3cCfgLogCmdSrcAddrRev InetAddress, h3cCfgLogCmdSrcAddrVPNName DisplayString, h3cCfgLogServerAddrType InetAddressType, h3cCfgLogServerAddrRev InetAddress, h3cCfgLogServerAddrVPNName DisplayString } h3cCfgLogIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the table beginning from 1." ::= { h3cCfgLogEntry 1 } h3cCfgLogTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the sysUpTime when the config log was generated." ::= { h3cCfgLogEntry 2 } h3cCfgLogSrcCmd OBJECT-TYPE SYNTAX INTEGER { cmdLine(1), snmp(2), other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the source command which brought the log. Currently we provide the types of source: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by snmp. 3.other(3):configure log instigated by other source unknown." ::= { h3cCfgLogEntry 3 } h3cCfgLogSrcData OBJECT-TYPE SYNTAX INTEGER { erase(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line " ::= { h3cCfgLogEntry 4 } h3cCfgLogDesData OBJECT-TYPE SYNTAX INTEGER { unknown(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line" ::= { h3cCfgLogEntry 5 } h3cCfgLogTerminalType OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal type. If h3cCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as telnet. auxiliary(6): auxiliary interface." ::= { h3cCfgLogEntry 6 } h3cCfgLogTerminalUser OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string." ::= { h3cCfgLogEntry 7 } h3cCfgLogTerminalNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the terminal number. If h3cCfgLogSrcCmd is not 'cmdLine', use '-1'" ::= { h3cCfgLogEntry 8 } h3cCfgLogTerminalLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The location of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string." ::= { h3cCfgLogEntry 9 } h3cCfgLogCmdSrcAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by for it only support IPv4." ::= { h3cCfgLogEntry 10 } h3cCfgLogVirHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The host name of remote system connected if h3cCfgLogTerminalType has the value of 'virtual'. Other, a zero length string." ::= { h3cCfgLogEntry 11 } h3cCfgLogUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user name used when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a zero length string." ::= { h3cCfgLogEntry 12 } h3cCfgLogServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by for it only support IPv4." ::= { h3cCfgLogEntry 13 } h3cCfgLogFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current configuration file name when h3cCfgLogSrcData has the value of 'netFtp',and h3cCfgLogDesData has the value of 'startupData'. Other, a zero length string." ::= { h3cCfgLogEntry 14 } h3cCfgLogCmdSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address for the h3cCfgLogCmdSrcAddrRev." ::= { h3cCfgLogEntry 15 } h3cCfgLogCmdSrcAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0." ::= { h3cCfgLogEntry 16 } h3cCfgLogCmdSrcAddrVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { h3cCfgLogEntry 17 } h3cCfgLogServerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address for the h3cCfgLogServerAddrRev." ::= { h3cCfgLogEntry 18 } h3cCfgLogServerAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0." ::= { h3cCfgLogEntry 19 } h3cCfgLogServerAddrVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { h3cCfgLogEntry 20 } h3cCfgOperate OBJECT IDENTIFIER ::= { h3cConfigManObjects 2 } h3cCfgOperateGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of copy entries that may be held in h3cCfgOperateTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { h3cCfgOperate 1 } h3cCfgOperateEntryAgeOutTime OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minute" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of minutes an unactive h3cCfgOperateEntry SHOULD be kept in the h3cCfgOperateTable before it is active. The object is a fator taken account of when it needs delete some rows make room in h3cCfgOperateTable. " DEFVAL { 5 } ::= { h3cCfgOperate 2 } h3cCfgOperateResultGlobalEntryLimit OBJECT-TYPE SYNTAX Integer32(1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of copy entries that may be held in h3cCfgOperateResultTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { h3cCfgOperate 3 } h3cCfgOperateTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests." ::= { h3cCfgOperate 4 } h3cCfgOperateEntry OBJECT-TYPE SYNTAX H3cCfgOperateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An operate request entry." INDEX { h3cCfgOperateIndex } ::= { h3cCfgOperateTable 1 } H3cCfgOperateEntry ::= SEQUENCE { h3cCfgOperateIndex Integer32, h3cCfgOperateType ConfigOperationType, h3cCfgOperateProtocol INTEGER, h3cCfgOperateFileName DisplayString, h3cCfgOperateServerAddress IpAddress, h3cCfgOperateUserName DisplayString, h3cCfgOperateUserPassword DisplayString, h3cCfgOperateEndNotificationSwitch TruthValue, h3cCfgOperateRowStatus RowStatus, h3cCfgOperateServerPort Integer32, h3cCfgOperateSrvAddrType InetAddressType, h3cCfgOperateSrvAddrRev InetAddress, h3cCfgOperateSrvVPNName DisplayString } h3cCfgOperateIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique index value of a row in this table." ::= { h3cCfgOperateEntry 1 } h3cCfgOperateType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the type of operation on configuration." ::= { h3cCfgOperateEntry 2 } h3cCfgOperateProtocol OBJECT-TYPE SYNTAX INTEGER { ftp(1), tftp(2), clusterftp(3), clustertftp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of h3cCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of h3cCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the h3cCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of h3cCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2. " ::= { h3cCfgOperateEntry 3 } h3cCfgOperateFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the object of h3cCfgOperateType has the value of net2Startup, net2running or running2Net,the value must be specified. The file name may include the path if applicable. If the value of h3cCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers.If the value of h3cCfgOperateType is running2Net , this node specify the destination file name of transfers. When h3cCfgOperateType has the value of startup2net,the object may not be created instead of using the file name of startup configuration file." ::= { h3cCfgOperateEntry 4 } h3cCfgOperateServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by h3cFlhOperSrvAddr for it only support IPv4." ::= { h3cCfgOperateEntry 5 } h3cCfgOperateUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the ftp server from/to which to download/upload should be specified. The object must be created if h3cCfgOperateProtocol has the value of ftp. " ::= { h3cCfgOperateEntry 6 } h3cCfgOperateUserPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the ftp server from/to which to download/upload should be specified. The object must be created if h3cCfgOperateProtocol has the value of ftp. " ::= { h3cCfgOperateEntry 7 } h3cCfgOperateEndNotificationSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies whether or not a notification should be issued on the completion of the operation." DEFVAL { false } ::= { h3cCfgOperateEntry 8 } h3cCfgOperateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. When the status is active all the object's value in the entry is not allowed to modified." ::= { h3cCfgOperateEntry 9 } h3cCfgOperateServerPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used." ::= { h3cCfgOperateEntry 10 } h3cCfgOperateSrvAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address for h3cCfgOperateSrvAddrRev." ::= { h3cCfgOperateEntry 11 } h3cCfgOperateSrvAddrRev OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified." ::= { h3cCfgOperateEntry 12 } h3cCfgOperateSrvVPNName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The VPN instance of this operation uses." ::= { h3cCfgOperateEntry 13 } h3cCfgOperateResultTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-operation requests result." ::= { h3cCfgOperate 5 } h3cCfgOperateResultEntry OBJECT-TYPE SYNTAX H3cCfgOperateResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result entries of configuration operation requests." INDEX { h3cCfgOperateResultIndex } ::= { h3cCfgOperateResultTable 1 } H3cCfgOperateResultEntry ::= SEQUENCE { h3cCfgOperateResultIndex Integer32, h3cCfgOperateResultOptIndex Integer32, h3cCfgOperateResultOpType ConfigOperationType, h3cCfgOperateState ConfigOperationStateType, h3cCfgOperateTime TimeTicks, h3cCfgOperateEndTime TimeTicks, h3cCfgOperFailReason DisplayString } h3cCfgOperateResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { h3cCfgOperateResultEntry 1 } h3cCfgOperateResultOptIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The operation index in the h3cCfgOperateTable." ::= { h3cCfgOperateResultEntry 2 } h3cCfgOperateResultOpType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation type in the h3cCfgOperateTable." ::= { h3cCfgOperateResultEntry 3 } h3cCfgOperateState OBJECT-TYPE SYNTAX ConfigOperationStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation state type in the h3cCfgOperateTable." ::= { h3cCfgOperateResultEntry 4 } h3cCfgOperateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes." ::= { h3cCfgOperateResultEntry 5 } h3cCfgOperateEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the configuration operation is finished." ::= { h3cCfgOperateResultEntry 6 } h3cCfgOperFailReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reasons of configuration operation." ::= { h3cCfgOperateResultEntry 7 } h3cCfgExecuteOperate OBJECT IDENTIFIER ::= { h3cCfgOperate 6 } h3cCfgExecuteOperateResultEntryLimit OBJECT-TYPE SYNTAX Integer32(5..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of ConfigOperationType entries that may be held in h3cCfgExecuteResultTable. A particular setting does not guarantee that much data can be held." DEFVAL { 5 } ::= { h3cCfgExecuteOperate 1 } h3cCfgExecuteResultTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cCfgExecuteResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of configuration execute result." ::= { h3cCfgExecuteOperate 2 } h3cCfgExecuteResultEntry OBJECT-TYPE SYNTAX H3cCfgExecuteResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The result entries of configuration execute operation." INDEX { h3cCfgExecuteResultIndex } ::= { h3cCfgExecuteResultTable 1 } H3cCfgExecuteResultEntry ::= SEQUENCE { h3cCfgExecuteResultIndex Integer32, h3cCfgExecuteResultOptIndex Integer32, h3cCfgExecuteResultOpType ConfigOperationType, h3cCfgExecuteState ConfigOperationStateType, h3cCfgExecuteTime TimeTicks, h3cCfgExecuteEndTime TimeTicks } h3cCfgExecuteResultIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached." ::= { h3cCfgExecuteResultEntry 1 } h3cCfgExecuteResultOptIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration execute operation index in the h3cCfgExecuteResultTable." ::= { h3cCfgExecuteResultEntry 2 } h3cCfgExecuteResultOpType OBJECT-TYPE SYNTAX ConfigOperationType MAX-ACCESS read-only STATUS current DESCRIPTION "The operation type in the h3cCfgExecuteResultTable." ::= { h3cCfgExecuteResultEntry 3 } h3cCfgExecuteState OBJECT-TYPE SYNTAX ConfigOperationStateType MAX-ACCESS read-only STATUS current DESCRIPTION "Record the status of the specified operation." ::= { h3cCfgExecuteResultEntry 4 } h3cCfgExecuteTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time of the execution starts." ::= { h3cCfgExecuteResultEntry 5 } h3cCfgExecuteEndTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Record the time of the execution is finished." ::= { h3cCfgExecuteResultEntry 6 } h3cCfgReset OBJECT-TYPE SYNTAX INTEGER { normal(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reboot device as default configuration." ::= { h3cCfgOperate 7 } h3cCfgFirstTrapTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the first trap time." ::= { h3cCfgLog 8 } h3cConfigManNotifications OBJECT IDENTIFIER ::= { h3cConfig 2 } h3cCfgManEventlog NOTIFICATION-TYPE OBJECTS { h3cCfgLogSrcCmd, h3cCfgLogSrcData, h3cCfgLogDesData } STATUS current DESCRIPTION "The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different." ::= { h3cConfigManNotifications 1 } h3cCfgOperateCompletion NOTIFICATION-TYPE OBJECTS { h3cCfgOperateType, h3cCfgOperateTime, h3cCfgOperateState, h3cCfgOperateEndTime, h3cCfgOperFailReason } STATUS current DESCRIPTION "When create h3cCfgOperateTable successfully, a notification may be generated." ::= { h3cConfigManNotifications 2 } h3cCfgInvalidConfigFile NOTIFICATION-TYPE OBJECTS { h3cCfgOperateType, h3cCfgOperateFileName, h3cCfgFirstTrapTime } STATUS current DESCRIPTION "When the configuration file is invalid, this notification will be generated." ::= { h3cConfigManNotifications 3 } h3cConfigManConformance OBJECT IDENTIFIER ::= { h3cConfig 3 } h3cConfigManCompliances OBJECT IDENTIFIER ::= { h3cConfigManConformance 1 } h3cConfigManCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The statement of compliance for those implementing the Huawei 3Com ConfigMan MIB." MODULE -- this module MANDATORY-GROUPS { h3cCfgManLogGroup, h3cCfgOperateGroup, h3cCfgManNotificationGroup } OBJECT h3cCfgOperateType SYNTAX ConfigOperationType WRITE-SYNTAX INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } DESCRIPTION " " ::= { h3cConfigManCompliances 1 } h3cConfigManGroups OBJECT IDENTIFIER ::= { h3cConfigManConformance 2 } h3cCfgManLogGroup OBJECT-GROUP OBJECTS { h3cCfgRunModifiedLast, h3cCfgRunSavedLast, h3cCfgStartModifiedLast, h3cCfgLogLimitedEntries, h3cCfgLogDeletedEntries, h3cCfgLogTime, h3cCfgLogSrcCmd, h3cCfgLogTerminalType, h3cCfgLogTerminalNum, h3cCfgLogTerminalUser, h3cCfgLogTerminalLocation, h3cCfgLogCmdSrcAddress, h3cCfgLogVirHost, h3cCfgLogServerAddress, h3cCfgLogFile, h3cCfgLogUserName, h3cCfgLogWantBackup, h3cCfgLogSrcData, h3cCfgLogDesData } STATUS current DESCRIPTION "A collection of objects configuration log group." ::= { h3cConfigManGroups 1 } h3cCfgOperateGroup OBJECT-GROUP OBJECTS { h3cCfgOperateGlobalEntryLimit, h3cCfgOperateEntryAgeOutTime, h3cCfgOperateType, h3cCfgOperateProtocol, h3cCfgOperateFileName, h3cCfgOperateServerAddress, h3cCfgOperateUserName, h3cCfgOperateUserPassword, h3cCfgOperateTime, h3cCfgOperateEndNotificationSwitch, h3cCfgOperateResultGlobalEntryLimit, h3cCfgOperateState, h3cCfgOperateRowStatus, h3cCfgOperateResultOptIndex, h3cCfgOperateResultOpType, h3cCfgOperateEndTime, h3cCfgOperFailReason, h3cCfgOperateServerPort } STATUS current DESCRIPTION "A group of configuration operation." ::= { h3cConfigManGroups 2 } h3cCfgManNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { h3cCfgManEventlog, h3cCfgOperateCompletion, h3cCfgInvalidConfigFile } STATUS current DESCRIPTION "Collection of notification objects." ::= { h3cConfigManGroups 3 } END