ZhoneVaIfCfgEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfCfgImpedance |
INTEGER |
|
|
zhoneVaIfCfgReceiveTLP |
INTEGER |
|
|
zhoneVaIfCfgTransmitTLP |
INTEGER |
|
|
zhoneVaIfCfgTrunkConditioning |
INTEGER |
|
|
zhoneVaIfCfgLineType |
INTEGER |
|
|
zhoneVaIfCfgIntegratedDSP |
TruthValue |
|
|
zhoneVaIfCfgLineCapabilities |
BITS |
|
|
zhoneVaIfCfgMaintenanceMode |
INTEGER |
|
|
zhoneVaIfCfgPCMEncoding |
INTEGER |
|
|
zhoneVaIfCfgReceiveTLPNum |
INTEGER |
|
|
zhoneVaIfCfgTransmitTLPNum |
INTEGER |
|
|
zhoneVaIfCfgLoopCurrent |
INTEGER |
|
|
zhoneVaIfCfgRingVoltage |
INTEGER |
|
ZhoneVaIfStatusEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfStatusSignalErrors |
Counter32 |
|
|
zhoneVaIfStatusInfoType |
INTEGER |
|
ZhoneVaIfFXSCfgEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfFXSCfgSignalType |
INTEGER |
|
|
zhoneVaIfFXSRingFrequency |
INTEGER |
|
|
zhoneVaIfFXSRingBack |
INTEGER |
|
ZhoneVaIfFXSTimingEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfFXSTimingDigitDuration |
Integer32 |
|
|
zhoneVaIfFXSTimingInterDigitDuration |
Integer32 |
|
ZhonePotsRingEntry |
|
SEQUENCE |
|
|
|
|
zhonePotsRingIfIndex |
InterfaceIndex |
|
|
zhonePotsRingRingingCadence |
INTEGER |
|
|
zhonePotsRingTimer |
Integer32 |
|
|
zhonePotsRingRowStatus |
ZhoneRowStatus |
|
ZhoneVaIfFXOCfgEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfFXOCfgSignalType |
INTEGER |
|
|
zhoneVaIfFXOCfgNumberRings |
Integer32 |
|
|
zhoneVaIfFXOCfgSupDisconnect |
TruthValue |
|
|
zhoneVaIfFXOCfgDialType |
INTEGER |
|
ZhoneVaIfFXOTimingEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfFXOTimingDigitDuration |
Integer32 |
|
|
zhoneVaIfFXOTimingInterDigitDuration |
Integer32 |
|
|
zhoneVaIfFXOTimingPulseRate |
Integer32 |
|
|
zhoneVaIfFXOTimingPulseInterDigitDuration |
Integer32 |
|
ZhoneVaIfEMStatusEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfEMInSeizureActive |
TruthValue |
|
|
zhoneVaIfEMOutSeizureActive |
TruthValue |
|
ZhoneVaIfEMTimingEntry |
|
SEQUENCE |
|
|
|
|
zhoneVaIfEMTimingDigitDuration |
Integer32 |
|
|
zhoneVaIfEMTimingInterDigitDuration |
Integer32 |
|
|
zhoneVaIfEMTimingPulseRate |
Integer32 |
|
|
zhoneVaIfEMTimingPulseInterDigitDuration |
Integer32 |
|
|
zhoneVaIfEMTimingClearWaitDuration |
Integer32 |
|
|
zhoneVaIfEMTimingMaxWinkWaitDuration |
Integer32 |
|
|
zhoneVaIfEMTimingMaxWinkDuration |
Integer32 |
|
|
zhoneVaIfEMTimingDelayStart |
Integer32 |
|
|
zhoneVaIfEMTimingMaxDelayDuration |
Integer32 |
|
|
zhoneVaIfEMTimingMinDelayPulseWidth |
Integer32 |
|
zhoneVaIfCfgEntry |
1.3.6.1.4.1.5504.5.6.1.1.1 |
An entry in the configuration table for each voice analog
interface. The entry is created when the voice analog
hardware is detected.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfCfgEntry |
|
|
zhoneVaIfCfgReceiveTLP |
1.3.6.1.4.1.5504.5.6.1.1.1.2 |
Receive Transmission Level Point (RTLP) settings control the amount gain or loss added to the incoming signal after it is decoded to analog.
to increase the signal level set the RTLP setting to higher values. The default is fxsRtlpN6db. Rtlpnummeric selects entering the actual
value in zhoneVaIFCfgReceiveTLPNum. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fxsRtlpN9db(1), fxsRtlpN8db(2), fxsRtlpN7db(3), fxsRtlpN6db(4), fxsRtlpN5db(5), fxsRtlpN4db(6), fxsRtlpN3db(7), fxsRtlpN2db(8), fxsRtlpN1db(9), fxsRtlp0db(10), fxsRtlp1db(11), fxsRtlp2db(12), fxsRtlp3db(13), rTlpNummeric(14) |
|
zhoneVaIfCfgTransmitTLP |
1.3.6.1.4.1.5504.5.6.1.1.1.3 |
In case of FXO, it specifies FXO attenuation and default value is 0dB(fxsTtlp0db).
In case of FXS this setting controls the amount of gain or loss added
to a voice signal from CPE before it is encoded to digital PCM.
To increase the signal level, reduce the TTLP setting to lower value.
The default is fxsTtlp0db. Ttlpnummeric selects entering the actual
value in zhoneVaIFCfgTransmitTLPNum. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fxsTtlp9db(1), fxsTtlp8db(2), fxsTtlp7db(3), fxsTtlp6db(4), fxsTtlp5db(5), fxsTtlp4db(6), fxsTtlp3db(7), fxsTtlp2db(8), fxsTtlp1db(9), fxsTtlp0db(10), fxsTtlpN1db(11), fxsTtlpN2db(12), fxsTtlpN3db(13), tTlpNummeric(14) |
|
zhoneVaIfCfgMaintenanceMode |
1.3.6.1.4.1.5504.5.6.1.1.1.8 |
Indicates the maintenance modes of the Analog voice interface.
loopback options for Fxo and Fxs cards (Zhone specific)
-------------------------------------------------------
CODEC
T1/E1 DS0 ---------------------------
<------- <--------------- -----------------
Network PCM Bus ^ Digital ^
| to analog Converter|
| |
| |
| |
Digital loopback Analog loopback
| |
-------> -------- ->--------------------------------------------->
off(1) - the interface is not in maintenance mode.
ifDigitalLoopback(2) This mode is set by the managed system to perform the
Digital loopback test.
ifAnalogLoopback(3) This mode is set by the managed system to perform the
Analog loopback test. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), ifDigitalLoopback(2), ifAnalogLoopback(3) |
|
zhoneVaIfStatusEntry |
1.3.6.1.4.1.5504.5.6.1.2.1 |
An entry in the status table for each Analog voice interface.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfStatusEntry |
|
|
zhoneVaIfFXSCfgEntry |
1.3.6.1.4.1.5504.5.6.2.1.1 |
An entry in the standard configuration table for
each FXS interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXSCfgEntry |
|
|
zhoneVaIfFXSCfgSignalType |
1.3.6.1.4.1.5504.5.6.2.1.1.1 |
the signaling type of FXS interface.
fxsLoopStart - loop start.
fxsGroundStart - ground start.
fxsLoopStartFd
fxsGroundStartAutomatic - Used with equipment requiring fast response time to the Central Office.
fxsGroundStartImmediate - Used with equipment requiring fast response time to the station or PBX.
fxsdnLoopStart- loop start in fxsdn mode
fxsdnLoopStartFd
fxsdnGroundStart- Ground start in fxsdn mode
fxsdnGroundStartImmediate - Ground start immediate in fxsdn mode
fxsdnwinkLoopStart - loop start in fxsdnwink (foreign exchange
subscriber - defined wink start operation) this
option proved the same type of signalling as
FXSDN and provides 150 millisecond delay then
200 ms wink ack to the central office when fxs port sees an off hook condition from central office .
The system requires a ringing generator for this option.
fxsdnwinkLoopStartFd
fxsdnwinkGroundStart- Ground start in FXSDNWINK mode
fxsdnwinkGroundStartImmediate - Ground start immediate in FXSDNWINK mode.
fxstr08SingleParty - TR08 is Frame format signalling and data link as defined in TR-TSY-00008 Mode 1
for circuits using AT & T SLC-96 facilities.
this option is for single party service ,
this option connects the port to one way out going trunks from a PBX , CENTEREX, key system , ot telephone set to an SLC channel.
The SLC96 mode also must be active on the associated WAN interface.
fxstr08UniversalVoiceGrade - Toll quality voice for SLC-96
fxstr08UniversalVoiceGradeAutomatic- Used with some non - Bell switches for SLC-96
The default value of this object is fxsLoopStart(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fxsLoopStart(1), fxsGroundStart(2), fxsLoopStartFd(3), fxsGroundStartAutomatic(4), fxsGroundStartImmediate(5), fxsdnLoopStart(6), fxsdnLoopStartFd(7), fxsdnGroundStart(8), fxsdnGroundStartImmediate(9), fxsdnwinkLoopStart(10), fxsdnwinkLoopStartFd(11), fxsdnwinkGroundStart(12), fxsdnwinkGroundStartImmediate(13), fxstr08SingleParty(14), fxstr08UniversalVoiceGrade(15), fxstr08UniversalVoiceGradeAutomatic(16) |
|
zhoneVaIfFXSStatusEntry |
1.3.6.1.4.1.5504.5.6.2.2.1 |
An entry in the status table for each FXS interface.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXSStatusEntry |
|
|
zhoneVaIfFXSTimingEntry |
1.3.6.1.4.1.5504.5.6.2.3.1 |
An entry in the FXS Timing Parameters Table for
each FXS interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXSTimingEntry |
|
|
zhonePotsRingEntry |
1.3.6.1.4.1.5504.5.6.2.4.1 |
potsring table entry |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhonePotsRingEntry |
|
|
zhoneVaIfFXOCfgEntry |
1.3.6.1.4.1.5504.5.6.3.1.1 |
An entry in the standard configuration table for
each FXO interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXOCfgEntry |
|
|
zhoneVaIfFXOStatusEntry |
1.3.6.1.4.1.5504.5.6.3.2.1 |
An entry in the status table for each FXO interface.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXOStatusEntry |
|
|
zhoneVaIfFXOTimingEntry |
1.3.6.1.4.1.5504.5.6.3.3.1 |
An entry in the FXO Timing Parameters Table for
each FXO interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfFXOTimingEntry |
|
|
zhoneVaIfEMCfgEntry |
1.3.6.1.4.1.5504.5.6.4.1.1 |
An entry in the standard configuration table for
each E&M tie trunk interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfEMCfgEntry |
|
|
zhoneVaIfEMCfgType |
1.3.6.1.4.1.5504.5.6.4.1.1.3 |
Specifies the E&M Lead Signaling type.
LEGEND: V = -48V
/\/\/ = detector/resister
X = normally open relay contact
+ = normally closed relay contact
G = ground
SB = Signal Battery
SG = Signal Ground
typeI -
Leads: E (output, relay to ground)
M (input, referenced to ground)
The tie line equipment (switch/router/etc) generates the
E-signal to the PBX type grounding the E-lead.
The tie line equipment detects the M-signal by detecting
current flow to ground. A common ground must exist
between the line equipment and the PBX.
PBX | TIE LINE
|
E: V--/\/\/---|-----X----G
|
M: V----X-----|---/\/\/--G
typeII -
Leads: E (output, relay to SG)
M (input, referenced to ground)
SB (feed for M, connected to -48V)
SG (return for E, galvanically isolated from ground)
This interface requires no common ground between the
equipment, thus avoiding ground loop noise problems.
E-signal is generated toward the PBX by connecting it
to SG. M-signal is indicated by the PBX connecting
it to SB. While this interface does NOT require a
common ground, it does have the tendency to inject
noise into the audio paths since it is asymmetrical
with respect to current flow between devices.
PBX | TIE LINE
|
E: V--/\/\/---|-----X----
| |
SG: G----------|----------
|
M: ----X-----|---/\/\/--G
| |
SB: ----------|----------V
typeIII -
Leads: E (output, relay to ground)
M (input, referenced to ground)
SB (connected to -48V)
SG (connected to ground)
This interface operates similar to type I with respect
to the E-signal. The M-signal, however, is indicated by
the PBX connecting it to SB on assertion, and alternately
connecting it to SG during inactivity. Unfortunately, a
common ground must be shared between the equipment.
PBX | TIE LINE
|
E: V--/\/\/---|-----X----G
|
SG: ----------|----------G
+ |
M: ----------|---/\/\/--G
X |
SB: ----------|----------V
typeIV -
Leads: E (output, relay to SG)
M (input, referenced to -48V)
SB (feed for M, connected to ground)
SG (return for E, galvanically isolated from ground)
This interface is fully symmetrical; it does not require
a common ground, does not inject noise into audio paths,
and can be connected back to back by swapping E/SG for
M/SB. E-signal is indicated to the PBX by connecting it
to SG. M-signal is provided by the PBX connecting it to
SB.
PBX | TIE LINE
|
E: V--/\/\/---|-----X----
| |
SG: G----------|----------
|
M: ----------|---/\/\/--V
X |
SB: ----------|----------G
typeV -
Leads: E (output, relay to ground)
M (input, referenced to -48V)
Type V line equipment indicates E-signal to the PBX by
grounding the E-lead. The PBX indicates M-signal by
grounding the M-lead. This interface does require a
common ground, but does allow back to back connections
by swapping E for M. This interface is quasi-symmetric
in that while the line is up, current flow is more or
less equal between the PBX and line equipment. But noise
injection is still a problem.
PBX | TIE LINE
|
E: V--/\/\/---|-----X----G
|
M: G-----X----|---/\/\/--V
|
The default value of this object is typeI(1).
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
typeI(1), typeII(2), typeIII(3), typeIV(4), typeV(5), typeIIE(6), typeIIM(7), typeTO(8) |
|
zhoneVaIfEMStatusEntry |
1.3.6.1.4.1.5504.5.6.4.2.1 |
An entry in the status table for each E&M interface.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfEMStatusEntry |
|
|
zhoneVaIfEMTimingEntry |
1.3.6.1.4.1.5504.5.6.4.3.1 |
An entry in the E&M Timing Parameters Table for
each E&M interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZhoneVaIfEMTimingEntry |
|
|