ZYXEL-STORM-CONTROL-MIB

File: ZYXEL-STORM-CONTROL-MIB.mib (5882 bytes)

Imported modules

RFC1155-SMI	SNMPv2-SMI	SNMPv2-TC
RFC1213-MIB	P-BRIDGE-MIB	Q-BRIDGE-MIB
BRIDGE-MIB	IF-MIB	SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB	DISMAN-PING-MIB	IEEE8021-CFM-MIB
OSPF-MIB	ZYXEL-ES-SMI

Imported symbols

enterprises	OBJECT-TYPE	RowStatus
DateAndTime	TruthValue	StorageType
MacAddress	DisplayString	EnabledStatus
PortList	dot1dBasePort	InterfaceIndexOrZero
SnmpAdminString	InetAddressType	InetAddress
OperationResponseStatus	Counter	TimeTicks
BridgeId	Timeout	dot1agCfmMdIndex
dot1agCfmMaIndex	dot1agCfmMepIdentifier	IpAddress
ifIndex	NOTIFICATION-TYPE	sysObjectID
ospfIfIpAddress	ospfAddressLessIf	ospfAreaId
ospfNbrIpAddr	ospfNbrAddressLessIndex	ospfLsdbAreaId
ospfLsdbType	ospfLsdbLsid	ospfLsdbRouterId
ospfVirtIfAreaId	ospfVirtIfNeighbor	esMgmt

Defined Types

ZyxelStromControlPortEntry
SEQUENCE
	zyStromControlPortBroadcastState	EnabledStatus
	zyStromControlPortBroadcastRate	INTEGER
	zyStromControlPortMulticastState	EnabledStatus
	zyStromControlPortMulticastRate	INTEGER
	zyStromControlPortDlfState	EnabledStatus
	zyStromControlPortDlfRate	INTEGER

Defined Values

zyxelStormControl		1.3.6.1.4.1.890.1.15.3.78
The subtree for storm control
MODULE-IDENTITY

zyxelStormControlSetup		1.3.6.1.4.1.890.1.15.3.78.1
OBJECT IDENTIFIER

zyStromControlState		1.3.6.1.4.1.890.1.15.3.78.1.1
Enabled/Disabled traffic storm control on the switch.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

zyxelStromControlPortTable		1.3.6.1.4.1.890.1.15.3.78.1.2
The table cantains storm control port configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZyxelStromControlPortEntry

zyxelStromControlPortEntry		1.3.6.1.4.1.890.1.15.3.78.1.2.1
A entry cantains storm control port configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZyxelStromControlPortEntry

zyStromControlPortBroadcastState		1.3.6.1.4.1.890.1.15.3.78.1.2.1.1
Enabled/Disabled broadcast rate limit on the indicated port.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

zyStromControlPortBroadcastRate		1.3.6.1.4.1.890.1.15.3.78.1.2.1.2
Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

zyStromControlPortMulticastState		1.3.6.1.4.1.890.1.15.3.78.1.2.1.3
Enabled/Disabled multicast rate limit on the indicated port.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

zyStromControlPortMulticastRate		1.3.6.1.4.1.890.1.15.3.78.1.2.1.4
Allowed mullticast rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

zyStromControlPortDlfState		1.3.6.1.4.1.890.1.15.3.78.1.2.1.5
Enabled/Disabled destination lookup failure frames rate limit on the indicated port.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

zyStromControlPortDlfRate		1.3.6.1.4.1.890.1.15.3.78.1.2.1.6
Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800 pkts/s. For GE port, the maximum value is 262143 pkts/s.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor