ZYXEL-RATE-LIMIT-MIB

File: ZYXEL-RATE-LIMIT-MIB.mib (5724 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE RowStatus
DateAndTime TruthValue StorageType
MacAddress DisplayString EnabledStatus
PortList dot1dBasePort InterfaceIndexOrZero
SnmpAdminString InetAddressType InetAddress
OperationResponseStatus Counter TimeTicks
BridgeId Timeout dot1agCfmMdIndex
dot1agCfmMaIndex dot1agCfmMepIdentifier IpAddress
ifIndex NOTIFICATION-TYPE sysObjectID
ospfIfIpAddress ospfAddressLessIf ospfAreaId
ospfNbrIpAddr ospfNbrAddressLessIndex ospfLsdbAreaId
ospfLsdbType ospfLsdbLsid ospfLsdbRouterId
ospfVirtIfAreaId ospfVirtIfNeighbor esMgmt

Defined Types

ZyxelRateLimitPortEntry  
SEQUENCE    
  zyRateLimitPortCommitState EnabledStatus
  zyRateLimitPortCommitRate INTEGER
  zyRateLimitPortPeakState EnabledStatus
  zyRateLimitPortPeakRate INTEGER
  zyRateLimitPortEgressState EnabledStatus
  zyRateLimitPortEgressRate INTEGER

Defined Values

zyxelRateLimit 1.3.6.1.4.1.890.1.15.3.72
The subtree for rate limit
MODULE-IDENTITY    

zyxelRateLimitSetup 1.3.6.1.4.1.890.1.15.3.72.1
OBJECT IDENTIFIER    

zyRateLimitState 1.3.6.1.4.1.890.1.15.3.72.1.1
Enabled/Disabled ingress/egress rate limiting for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyxelRateLimitPortTable 1.3.6.1.4.1.890.1.15.3.72.1.2
The table contains rate limit port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelRateLimitPortEntry

zyxelRateLimitPortEntry 1.3.6.1.4.1.890.1.15.3.72.1.2.1
An entry contains rate limit port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelRateLimitPortEntry  

zyRateLimitPortCommitState 1.3.6.1.4.1.890.1.15.3.72.1.2.1.1
Enabled/Disabled ingress commit rate limiting on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyRateLimitPortCommitRate 1.3.6.1.4.1.890.1.15.3.72.1.2.1.2
Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on the specified port. The commit rate should be less than the peak rate. The sum of commit rates cannot be greater than or equal to the uplink bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

zyRateLimitPortPeakState 1.3.6.1.4.1.890.1.15.3.72.1.2.1.3
Enabled/Disabled ingress peak rate limiting on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyRateLimitPortPeakRate 1.3.6.1.4.1.890.1.15.3.72.1.2.1.4
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

zyRateLimitPortEgressState 1.3.6.1.4.1.890.1.15.3.72.1.2.1.5
Enabled/Disabled egress rate limiting on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyRateLimitPortEgressRate 1.3.6.1.4.1.890.1.15.3.72.1.2.1.6
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic flow on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER