ZYXEL-PORT-ISOLATION-MIB

File: ZYXEL-PORT-ISOLATION-MIB.mib (4100 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE RowStatus
DateAndTime TruthValue StorageType
MacAddress DisplayString EnabledStatus
PortList dot1dBasePort InterfaceIndexOrZero
SnmpAdminString InetAddressType InetAddress
OperationResponseStatus Counter TimeTicks
BridgeId Timeout dot1agCfmMdIndex
dot1agCfmMaIndex dot1agCfmMepIdentifier IpAddress
ifIndex NOTIFICATION-TYPE sysObjectID
ospfIfIpAddress ospfAddressLessIf ospfAreaId
ospfNbrIpAddr ospfNbrAddressLessIndex ospfLsdbAreaId
ospfLsdbType ospfLsdbLsid ospfLsdbRouterId
ospfVirtIfAreaId ospfVirtIfNeighbor esMgmt

Defined Types

ZyxelPortIsolationPortEntry  
SEQUENCE    
  zyPortIsolationPortState EnabledStatus

Defined Values

zyxelPortIsolation 1.3.6.1.4.1.890.1.15.3.64
The subtree for port isolation
MODULE-IDENTITY    

zyxelPortIsolationSetup 1.3.6.1.4.1.890.1.15.3.64.1
OBJECT IDENTIFIER    

zyxelPortIsolationPortTable 1.3.6.1.4.1.890.1.15.3.64.1.1
The table contains port isolation configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelPortIsolationPortEntry

zyxelPortIsolationPortEntry 1.3.6.1.4.1.890.1.15.3.64.1.1.1
An entry contains port isolation configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelPortIsolationPortEntry  

zyPortIsolationPortState 1.3.6.1.4.1.890.1.15.3.64.1.1.1.1
Enable/Disable Port isolation on the port. Enable to allow this port to communicate only with the CPU management port and the ports on which the isolation feature is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyPortIsolationSmartIsolationState 1.3.6.1.4.1.890.1.15.3.64.1.2
Enable/Disable smart Port isolation on the switch. The designated port(s) then becomes the isolated port. Smart isolation allows you to prevent isolated ports on different switch from transmitting traffic to each other.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus