ZYXEL-MAC-AUTHENTICATION-MIB
File:
ZYXEL-MAC-AUTHENTICATION-MIB.mib (7685 bytes)
Imported modules
Imported symbols
Defined Types
ZyxelMacAuthenticationPortEntry |
|
SEQUENCE |
|
|
|
|
zyMacAuthenticationPortState |
EnabledStatus |
|
|
zyMacAuthenticationPortTrustedVlan1k |
OCTET STRING |
|
|
zyMacAuthenticationPortTrustedVlan2k |
OCTET STRING |
|
|
zyMacAuthenticationPortTrustedVlan3k |
OCTET STRING |
|
|
zyMacAuthenticationPortTrustedVlan4k |
OCTET STRING |
|
Defined Values
zyMacAuthenticationState |
1.3.6.1.4.1.890.1.15.3.46.1.1 |
Enable/disable MAC authentication on the switch.
MAC authentication works in a very similar way to IEEE 802.1x authentication. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
EnabledStatus |
|
|
zyMacAuthenticationNamePrefix |
1.3.6.1.4.1.890.1.15.3.46.1.2 |
Type the prefix that is appended to all MAC addresses sent to the RADIUS server for authentication. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
zyMacAuthenticationPassword |
1.3.6.1.4.1.890.1.15.3.46.1.3 |
Type the password the switch sends along with the MAC address of
a client for authentication with the RADIUS server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
zyMacAuthenticationTimeout |
1.3.6.1.4.1.890.1.15.3.46.1.4 |
Specify the amount of time before the switch allows a client MAC address that fails authentication
to try and authenticate again. Maximum time is 3000 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
zyxelMacAuthenticationPortEntry |
1.3.6.1.4.1.890.1.15.3.46.1.5.1 |
An entry contains MAC authentication port configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ZyxelMacAuthenticationPortEntry |
|
|
zyMacAuthenticationPortTrustedVlan1k |
1.3.6.1.4.1.890.1.15.3.46.1.5.1.2 |
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..128) |
|
zyMacAuthenticationPortTrustedVlan2k |
1.3.6.1.4.1.890.1.15.3.46.1.5.1.3 |
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..128) |
|
zyMacAuthenticationPortTrustedVlan3k |
1.3.6.1.4.1.890.1.15.3.46.1.5.1.4 |
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..128) |
|
zyMacAuthenticationPortTrustedVlan4k |
1.3.6.1.4.1.890.1.15.3.46.1.5.1.5 |
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is associated to this primary VLAN,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..128) |
|