ZYXEL-ES-EOC350

File: ZYXEL-ES-EOC350.mib (143074 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ZYXEL-ES-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
TimeTicks Counter32 Counter64
Integer32 IpAddress enterprises
TEXTUAL-CONVENTION MacAddress DisplayString
RowStatus esPartnerProducts

Defined Types

EoCBrHostDHCPEntry  
SEQUENCE    
  eocBrHostDHCPIndex Integer32
  eocBrHostDHCPEPMac MacAddress
  eocBrHostDHCPHostMac MacAddress
  eocBrHostDHCPIPAddress IpAddress
  eocBrHostDHCPLease Integer32

EoCBrPortPropEntry  
SEQUENCE    
  eocBrPortPropPID Integer32
  eocBrPortPropType INTEGER
  eocBrPortPropConfig INTEGER
  eocBrPortPropLinkStatus INTEGER
  eocBrPortPropInRateCtrl INTEGER
  eocBrPortPropInRate INTEGER
  eocBrPortPropOutRateCtrl INTEGER
  eocBrPortPropOutRate INTEGER

EoCBrPortStatsEntry  
SEQUENCE    
  eocBrPortStatsPID Integer32
  eocBrPortStatsType INTEGER
  eocBrPortStatsRxPkts Counter64
  eocBrPortStatsRxBytes Counter64
  eocBrPortStatsTxPkts Counter64
  eocBrPortStatsTxBytes Counter64
  eocBrPortStatsCollisions Counter64
  eocBrPortStatsErrors Counter64

EoCBrAccountEntry  
SEQUENCE    
  eocBrAccountIndex Integer32
  eocBrAccountName DisplayString
  eocBrAccountPasswd DisplayString
  eocBrAccountPrivilege INTEGER
  eocBrAccountRowStatus RowStatus

EoCBrAllowIPProtocolEntry  
SEQUENCE    
  eocBrAllowIndex Integer32
  eocBrAllowIPAddress IpAddress
  eocBrAllowSubnetMask IpAddress
  eocBrAllowTelnet INTEGER
  eocBrAllowHttp INTEGER
  eocBrAllowSnmp INTEGER
  eocBrAllowIcmpPing INTEGER
  eocBrAllowRowStatus RowStatus

EoCBrStaticMacEntry  
SEQUENCE    
  eocBrStaticMacIndex Integer32
  eocBrStaticMacAddress MacAddress
  eocBrStaticMacBindingPort INTEGER
  eocBrStaticMacRowStatus RowStatus

EoCBrSnmpTrapEnableEntry  
SEQUENCE    
  eocBrSnmpTrapEnableIndex Integer32
  eocBrSnmpTrapEnableType INTEGER
  eocBrSnmpTrapEnableCtrl INTEGER

EoCBrSnmpTrapEntry  
SEQUENCE    
  eocBrSnmpTrapIndex Integer32
  eocBrSnmpTrapServer DisplayString
  eocBrSnmpTrapPortNum INTEGER
  eocBrSnmpTrapCommunity DisplayString
  eocBrSnmpTrapRowStatus RowStatus

EoCBrSyslogEntry  
SEQUENCE    
  eocBrSyslogIndex Integer32
  eocBrSyslogServer DisplayString
  eocBrSyslogIPAddress IpAddress
  eocBrSyslogSeverity INTEGER
  eocBrSyslogRowStatus RowStatus

EoCBrTcpUdpPriEntry  
SEQUENCE    
  eocBrTcpUdpRuleNum Integer32
  eocBrTcpUdpEnableCtrl INTEGER
  eocBrTcpUdpPortNum INTEGER
  eocBrTcpUdpMappedQueue INTEGER

EoCBrEPEntry  
SEQUENCE    
  eocBrEPIndex Integer32
  eocBrEPMac MacAddress
  eocBrEPNote DisplayString
  eocBrEPModel INTEGER
  eocBrEPProductName DisplayString
  eocBrEPOnlineStatus INTEGER
  eocBrEPHostCountLimit INTEGER
  eocBrEPWorkingPrivacyKeyMatched INTEGER
  eocBrEPDrvWorkingVersion DisplayString
  eocBrEPDrvUploadVersion DisplayString
  eocBrEPDrvUpgradeAction INTEGER
  eocBrEPDrvUpgradeStatus INTEGER
  eocBrEPPhyDiagAction INTEGER
  eocBrEPPhyDiagStatus INTEGER
  eocBrEPDiagDnLinkResult DisplayString
  eocBrEPDiagUpLinkResult DisplayString
  eocBrEPOnlineDiagAction INTEGER
  eocBrEPOnlineDiagStatus INTEGER
  eocBrEPRowStatus INTEGER

EoCBrEPMacInfoEntry  
SEQUENCE    
  eocBrEP-Index Integer32
  eocBrEP-MacType INTEGER
  eocBrEP-EPMac MacAddress
  eocBrEP-HostMac MacAddress

EoCBrEPNetPerEntry  
SEQUENCE    
  eocBrEPNetPerIndex Integer32
  eocBrEPNetPerEPMac MacAddress
  eocBrEPNetPerDnLinkSNR Integer32
  eocBrEPNetPerUpLinkSNR Integer32
  eocBrEPNetPerDnLinkRate Integer32
  eocBrEPNetPerUpLinkRate Integer32
  eocBrEPNetPerDnLinkRxPwr INTEGER
  eocBrEPNetPerUpLinkRxPwr INTEGER

EoCBrEPPayloadEncodeEntry  
SEQUENCE    
  eocBrEPPayloadEncodeIndex Integer32
  eocBrEPPayloadEncodeEPMac MacAddress
  eocBrEPPayloadEncodeDnRate Integer32
  eocBrEPPayloadEncodeUpRate Integer32

EoCBrTagPortEntry  
SEQUENCE    
  eocBrTagPortPID Integer32
  eocBrTagPortType INTEGER
  eocBrTagPortPriority INTEGER
  eocBrTagPortVID INTEGER
  eocBrTagPortInRule INTEGER
  eocBrTagPortOutRule INTEGER

EoCBrEPDesignateEntry  
SEQUENCE    
  eocBrEPDesignateEPIndex Integer32
  eocBrEPDesignateEPMac MacAddress
  eocBrEPDesignateOnlineStatus INTEGER
  eocBrEPDesignateDeviceVersion INTEGER
  eocBrEPDesignateIsSmart INTEGER
  eocBrEPDesignateIsTarget INTEGER

EoCBrEPPortPropEntry  
SEQUENCE    
  eocBrEPPortPropEPIndex Integer32
  eocBrEPPortPropPID Integer32
  eocBrEPPortPropEPMac MacAddress
  eocBrEPPortPropType INTEGER
  eocBrEPPortPropConfig INTEGER
  eocBrEPPortPropLinkStatus INTEGER
  eocBrEPPortPropFlowCtrl INTEGER
  eocBrEPPortPropInRateCtrl INTEGER
  eocBrEPPortPropInRate INTEGER
  eocBrEPPortPropOutRateCtrl INTEGER
  eocBrEPPortPropOutRate INTEGER
  eocBrEPPortPropEnableCtrl INTEGER

EoCBrEPPortStatsEntry  
SEQUENCE    
  eocBrEPPortStatsEPIndex Integer32
  eocBrEPPortStatsPID Integer32
  eocBrEPPortStatsEPMac MacAddress
  eocBrEPPortStatsType INTEGER
  eocBrEPPortStatsRxPkts Counter32
  eocBrEPPortStatsRxBytes Counter32
  eocBrEPPortStatsTxPkts Counter32
  eocBrEPPortStatsTxBytes Counter32
  eocBrEPPortStatsCollisions Counter32
  eocBrEPPortStatsErrors Counter32

EoCBrEPStatsCtrlEntry  
SEQUENCE    
  eocBrEPStatsCtrlEPIndex Integer32
  eocBrEPStatsCtrlEPMac MacAddress
  eocBrEPStatsCtrlReset INTEGER
  eocBrEPStatsCtrlRefresh INTEGER

EoCBrEPTcpUdpPriEntry  
SEQUENCE    
  eocBrEPTcpUdpEPIndex Integer32
  eocBrEPTcpUdpRuleNum Integer32
  eocBrEPTcpUdpEPMac MacAddress
  eocBrEPTcpUdpEnableCtrl INTEGER
  eocBrEPTcpUdpPortNum INTEGER
  eocBrEPTcpUdpMappedQueue INTEGER

EoCBrEPQueueSchEntry  
SEQUENCE    
  eocBrEPQueueSchEPIndex Integer32
  eocBrEPQueueSchEPMac MacAddress
  eocBrEPQueueSchType INTEGER

EoCBrEPPriSchemeEntry  
SEQUENCE    
  eocBrEPPriSchemeEPIndex Integer32
  eocBrEPPriSchemeEPMac MacAddress
  eocBrEPPriSchemeSelect INTEGER

EoCBrEPIGMPSnoopEntry  
SEQUENCE    
  eocBrEPIGMPSnoopEPIndex Integer32
  eocBrEPIGMPSnoopEPMac MacAddress
  eocBrEPIGMPSnoopEnableCtrl INTEGER

EoCBrEPTagVLANCtrlEntry  
SEQUENCE    
  eocBrEPTagVLANEPIndex Integer32
  eocBrEPTagVLANEPMac MacAddress
  eocBrEPTagVLANEnableCtrl INTEGER

EoCBrEPTagPortEntry  
SEQUENCE    
  eocBrEPTagPortEPIndex Integer32
  eocBrEPTagPortPID Integer32
  eocBrEPTagPortEPMac MacAddress
  eocBrEPTagPortType INTEGER
  eocBrEPTagPortPriority INTEGER
  eocBrEPTagPortVID INTEGER
  eocBrEPTagPortInRule INTEGER
  eocBrEPTagPortOutRule INTEGER

EoCBrEPCtrlEntry  
SEQUENCE    
  eocBrEPCtrlEPIndex Integer32
  eocBrEPCtrlEPMac MacAddress
  eocBrEPCtrlEtherDefault INTEGER
  eocBrEPCtrlReboot INTEGER

EoCBrEPHostMacFilterEntry  
SEQUENCE    
  eocBrEPHostMacFilterEPIndex Integer32
  eocBrEPHostMacFilterSetNum Integer32
  eocBrEPHostMacFilterEPMac MacAddress
  eocBrEPHostMacFilterEnableCtrl INTEGER
  eocBrEPHostMacFilterHostMac MacAddress

Defined Values

eoc350BrMib 1.3.6.1.4.1.890.1.15.5.1
OBJECT IDENTIFIER    

eoc350BrNotification 1.3.6.1.4.1.890.1.15.5.3
OBJECT IDENTIFIER    

eocBrSystemGroup 1.3.6.1.4.1.890.1.15.5.1.1
OBJECT IDENTIFIER    

eocBrIPGroup 1.3.6.1.4.1.890.1.15.5.1.2
OBJECT IDENTIFIER    

eocBrAdminGroup 1.3.6.1.4.1.890.1.15.5.1.4
OBJECT IDENTIFIER    

eocBrServiceGroup 1.3.6.1.4.1.890.1.15.5.1.5
OBJECT IDENTIFIER    

eocBrTFTPGroup 1.3.6.1.4.1.890.1.15.5.1.9
OBJECT IDENTIFIER    

eocBrMasterEoCGroup 1.3.6.1.4.1.890.1.15.5.1.7
OBJECT IDENTIFIER    

eocBrEPEoCGroup 1.3.6.1.4.1.890.1.15.5.1.8
OBJECT IDENTIFIER    

eocBrEtherGroup 1.3.6.1.4.1.890.1.15.5.1.10
OBJECT IDENTIFIER    

eocBrEPEtherGroup 1.3.6.1.4.1.890.1.15.5.1.11
OBJECT IDENTIFIER    

eocBrModel 1.3.6.1.4.1.890.1.15.5.1.1.1
Identify the bridge model.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER eOC350-TS(9076), eOC350-TS(9075), eOC350-TS(9876), eOC350-TS(9875)  

eocBrProductName 1.3.6.1.4.1.890.1.15.5.1.1.2
The bridge product name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrSystemMac 1.3.6.1.4.1.890.1.15.5.1.1.3
The 6-byte Ethernet Mac address of the bridge.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEoCMac 1.3.6.1.4.1.890.1.15.5.1.1.4
The 6-byte EoC Mac address of the bridge self EoC Master.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrHardwareVersion 1.3.6.1.4.1.890.1.15.5.1.1.5
The bridge hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

eocBrBootVersion 1.3.6.1.4.1.890.1.15.5.1.1.6
The bridge boot loader version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSystemFwWorkingVersion 1.3.6.1.4.1.890.1.15.5.1.1.7
The bridge current working/running system firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSystemFwUploadVersion 1.3.6.1.4.1.890.1.15.5.1.1.8
The stored system firmware version intended for upgrading the bridge. The firmware is placed in the bridge 'upload' area temporarily and is uploaded by TFTP or HTTP first.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSystemFwUpgradeAction 1.3.6.1.4.1.890.1.15.5.1.1.9
To trigger upgrade operation of the bridge to replace the current firmware (version eocBrSystemFwWorkingVersion) with the new uploaded firmware (version eocBrSystemFwUploadVersion). The SNMP manager can upgrade the system firmware by set the value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrSystemFwUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activateThenReboot(1)  

eocBrSystemFwUpgradeStatus 1.3.6.1.4.1.890.1.15.5.1.1.10
Status for upgrade operation of the bridge to replace the current firmware (version eocBrSystemFwWorkingVersion) with the new uploaded firmware (version eocBrSystemFwUploadVersion). The SNMP manager can upgrade the system firmware by set the eocBrSystemFwUpgradeAction value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrSystemFwUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrSystemReboot 1.3.6.1.4.1.890.1.15.5.1.1.11
Activate to reboot the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activateThenReboot(1)  

eocBrAutoEPDrvUpgrade 1.3.6.1.4.1.890.1.15.5.1.1.15
Sync/Upgrade connected EoC EP driver from current 'working/running' version to new 'upload' version automatically.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.1
IP address of the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrSubnetMask 1.3.6.1.4.1.890.1.15.5.1.2.2
Subnet mask of the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrDefaultGatewayIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.3
Default gateway for the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrPrimaryDnsIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.4
Primary DNS for the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrSecondaryDnsIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.5
Secondary DNS for the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrIPAddressAssign 1.3.6.1.4.1.890.1.15.5.1.2.6
Method to assign the IP address for the bridge. Use the static IP or obtain the dynamic IP from DHCP server by adopting DHCP client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dynamic-dhcp(1)  

eocBrDHCPLease 1.3.6.1.4.1.890.1.15.5.1.2.8
The DHCP IP leased period if the bridge adopt the DHCP client (dynamic-dhcp) to get the IP address. Void if bridge is assigned with static IP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrHostDHCPPadOpt82EnableCtrl 1.3.6.1.4.1.890.1.15.5.1.2.10
Pad the DHCP relay agent information or not. While enabled, bridge will pad DHCP packets sourced from hosts behind EP with option 82 information (Circuit ID and Remote ID). DHCP server could use the record of (assigned IP, Circuit ID, Remote ID) for IP address assignment management and usage tracking. Circuit ID is the bridge Ethernet Mac address and Remote ID is the EP device Mac address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrHostIPSourceGuardCtrl 1.3.6.1.4.1.890.1.15.5.1.2.12
Enable the IP Source Guard or not. While enabled, bridge will snoop the DHCP traffic passed to/from host and allow only host with IP/Mac via DHCP could access the network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrHostDHCPTable 1.3.6.1.4.1.890.1.15.5.1.2.13
A table that contains host device DHCP gleaning information behind each EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrHostDHCPEntry

eocBrHostDHCPEntry 1.3.6.1.4.1.890.1.15.5.1.2.13.1
An entry in the gleaning host DHCP list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrHostDHCPEntry  

eocBrHostDHCPIndex 1.3.6.1.4.1.890.1.15.5.1.2.13.1.1
The gleaning host DHCP entry index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrHostDHCPEPMac 1.3.6.1.4.1.890.1.15.5.1.2.13.1.3
EP device Mac address of current attached host DHCP entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrHostDHCPHostMac 1.3.6.1.4.1.890.1.15.5.1.2.13.1.4
Host Mac address of current host DHCP entry.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrHostDHCPIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.13.1.5
IP address of current host DHCP entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

eocBrHostDHCPLease 1.3.6.1.4.1.890.1.15.5.1.2.13.1.6
Remained lease time of current host DHCP entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrAutoConfig 1.3.6.1.4.1.890.1.15.5.1.2.15
Enable the Auto-Config function or not. While enabled, bridge will try to retrieve the Master and all connected EP config files from the designated Auto-Config directory 'eocBrAutoConfigTFTPExtensionPath' at server 'eocBrAutoConfigTFTPServer' via TFTP. Usually the 'Extension Path' and 'TFTP Server IP Address' are obtained during the DHCP client handshaking. For example, power on the bridge, it will start DHCP client and get the Auto-Config TFTP related parameters. If the Auto-Config is ON, bridge then begins to retrieve the config files of Master/EP. Setup Master/EP devices accordingly.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrAutoConfigTFTPServerIPAddress 1.3.6.1.4.1.890.1.15.5.1.2.16
The IP address of the Auto-Config TFTP server, from which the management bridge can Get the Master/EP config files.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrAutoConfigTFTPExtensionPath 1.3.6.1.4.1.890.1.15.5.1.2.17
The extension directory path of files to be retrieved (TFTP Get) from the Auto-Config TFTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

eocBrAutoConfigTFTPServer 1.3.6.1.4.1.890.1.15.5.1.2.18
FQDN or IP address of the Auto-Config TFTP server, from which the management bridge can Get the Master/EP config files.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrEtherPort 1.3.6.1.4.1.890.1.15.5.1.10.1
OBJECT IDENTIFIER    

eocBrPortPropTable 1.3.6.1.4.1.890.1.15.5.1.10.1.1
A table that contains Ethernet port properties.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrPortPropEntry

eocBrPortPropEntry 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1
An entry in the port properties table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrPortPropEntry  

eocBrPortPropPID 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.1
Port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrPortPropType 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.2
Port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrPortPropConfig 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.3
Configure Ethernet port properties.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autoNegotiation(0), fullDuplex100Mbps(1), halfDuplex100Mbps(2), fullDuplex10Mbps(3), halfDuplex10Mbps(4)  

eocBrPortPropLinkStatus 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.4
Ethernet port current link status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), fullDuplex100Mbps(1), halfDuplex100Mbps(2), fullDuplex10Mbps(3), halfDuplex10Mbps(4), fullDuplex1000Mbps(5)  

eocBrPortPropInRateCtrl 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.6
Enable/disable the maximum input(ingress) rate control for the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrPortPropInRate 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.7
Configure the maximum input(ingress) rate in 64kbps (n*64kbps)for the port. (maximum bandwidth between 0~200Mbps) For example, value '0' will shut it off and value '4' means the maximum rate is '4*64k=256kbps'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3125  

eocBrPortPropOutRateCtrl 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.8
Enable/disable the maximum output(egress) rate control for the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrPortPropOutRate 1.3.6.1.4.1.890.1.15.5.1.10.1.1.1.9
Configure the maximum output(egress) rate in 64kbps (n*64kbps)for the port. (maximum bandwidth between 0~200Mbps) . For ex maple, value '0' will shut it off and value '4' means the maximum rate is '4*64k=256kbps'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3125  

eocBrPortStatsTable 1.3.6.1.4.1.890.1.15.5.1.10.1.2
A table that contains port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrPortStatsEntry

eocBrPortStatsEntry 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1
An entry in the port statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrPortStatsEntry  

eocBrPortStatsPID 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.1
Port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrPortStatsType 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.2
Port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrPortStatsRxPkts 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.3
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrPortStatsRxBytes 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.4
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrPortStatsTxPkts 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.5
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrPortStatsTxBytes 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.6
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrPortStatsCollisions 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.7
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrPortStatsErrors 1.3.6.1.4.1.890.1.15.5.1.10.1.2.1.8
Port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

eocBrStatsCtrl 1.3.6.1.4.1.890.1.15.5.1.10.1.3
OBJECT IDENTIFIER    

eocBrStatsCtrlReset 1.3.6.1.4.1.890.1.15.5.1.10.1.3.1
To clear/reset statistics, the SNMP manager need to set the value to activate(1); and submit to the bridge to clear all statistics. The value will back to idle(0) once reset has completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrStatsCtrlRefresh 1.3.6.1.4.1.890.1.15.5.1.10.1.3.2
To refresh/reload statistics, the SNMP manager need to set the value to activate(1); and submit to the bridge to refresh all statistics. The value will back to idle(0) once completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrAccountTable 1.3.6.1.4.1.890.1.15.5.1.4.1
A table that contains administrator account information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrAccountEntry

eocBrAccountEntry 1.3.6.1.4.1.890.1.15.5.1.4.1.1
An entry in the administrator account table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrAccountEntry  

eocBrAccountIndex 1.3.6.1.4.1.890.1.15.5.1.4.1.1.1
Account index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrAccountName 1.3.6.1.4.1.890.1.15.5.1.4.1.1.2
Account user name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

eocBrAccountPasswd 1.3.6.1.4.1.890.1.15.5.1.4.1.1.3
Account password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

eocBrAccountPrivilege 1.3.6.1.4.1.890.1.15.5.1.4.1.1.4
Account privilege.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER superuser(0), readWrite(1), readOnly(2)  

eocBrAccountRowStatus 1.3.6.1.4.1.890.1.15.5.1.4.1.1.5
To create, delete or modify a administrator account(one row) in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eocBrAllowIPProtocolTable 1.3.6.1.4.1.890.1.15.5.1.4.2
A table that contains permitted source IP addresses with allowable protocols to access the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrAllowIPProtocolEntry

eocBrAllowIPProtocolEntry 1.3.6.1.4.1.890.1.15.5.1.4.2.1
An entry for permitted source IP address and protocol to access the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrAllowIPProtocolEntry  

eocBrAllowIndex 1.3.6.1.4.1.890.1.15.5.1.4.2.1.1
Allowed host index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrAllowIPAddress 1.3.6.1.4.1.890.1.15.5.1.4.2.1.2
Specify the permitted source IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrAllowSubnetMask 1.3.6.1.4.1.890.1.15.5.1.4.2.1.3
Specify the permitted subnet.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrAllowTelnet 1.3.6.1.4.1.890.1.15.5.1.4.2.1.4
Allow TELNET or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

eocBrAllowHttp 1.3.6.1.4.1.890.1.15.5.1.4.2.1.5
Allow HTTP or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

eocBrAllowSnmp 1.3.6.1.4.1.890.1.15.5.1.4.2.1.6
Allow SNMP or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

eocBrAllowIcmpPing 1.3.6.1.4.1.890.1.15.5.1.4.2.1.7
Allow ping or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

eocBrAllowRowStatus 1.3.6.1.4.1.890.1.15.5.1.4.2.1.8
To create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eocBrStaticMacTable 1.3.6.1.4.1.890.1.15.5.1.4.3
A table that contains static Mac addresses binding to specific Ethernet port of the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrStaticMacEntry

eocBrStaticMacEntry 1.3.6.1.4.1.890.1.15.5.1.4.3.1
An entry for static Mac.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrStaticMacEntry  

eocBrStaticMacIndex 1.3.6.1.4.1.890.1.15.5.1.4.3.1.1
Static Mac index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrStaticMacAddress 1.3.6.1.4.1.890.1.15.5.1.4.3.1.2
Specify the static Mac address.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

eocBrStaticMacBindingPort 1.3.6.1.4.1.890.1.15.5.1.4.3.1.3
Specify the static Mac binding Ethernet port index.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lan1(1), lan2(2)  

eocBrStaticMacRowStatus 1.3.6.1.4.1.890.1.15.5.1.4.3.1.4
To create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eocBrTelnet 1.3.6.1.4.1.890.1.15.5.1.5.1
OBJECT IDENTIFIER    

eocBrTelnetEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.5.1.1
Activate TELNET server or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrTelnetPortNum 1.3.6.1.4.1.890.1.15.5.1.5.1.2
TELNET server listen port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrTelnetExpiryInSeconds 1.3.6.1.4.1.890.1.15.5.1.5.1.3
TELNET server idle timer (in seconds), logout automatically if expired.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrHttp 1.3.6.1.4.1.890.1.15.5.1.5.2
OBJECT IDENTIFIER    

eocBrHttpEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.5.2.1
Activate HTTP server or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrHttpPortNum 1.3.6.1.4.1.890.1.15.5.1.5.2.2
HTTP server listen port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrSnmp 1.3.6.1.4.1.890.1.15.5.1.5.3
OBJECT IDENTIFIER    

eocBrSnmpEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.5.3.1
Activate SNMP agent or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrSnmpPortNum 1.3.6.1.4.1.890.1.15.5.1.5.3.2
SNMP agent listen port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrSnmpName 1.3.6.1.4.1.890.1.15.5.1.5.3.3
SNMP managed bridge name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpContact 1.3.6.1.4.1.890.1.15.5.1.5.3.4
SNMP managed bridge contact information.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpLocation 1.3.6.1.4.1.890.1.15.5.1.5.3.5
SNMP managed bridge location information.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpReadWriteCommunity 1.3.6.1.4.1.890.1.15.5.1.5.3.6
SNMP managed bridge read-write community.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpReadOnlyCommunity 1.3.6.1.4.1.890.1.15.5.1.5.3.7
SNMP managed bridge read-only community.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpTrapEnableTable 1.3.6.1.4.1.890.1.15.5.1.5.3.8
A table that turn on/off specific SNMP trap service.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrSnmpTrapEnableEntry

eocBrSnmpTrapEnableEntry 1.3.6.1.4.1.890.1.15.5.1.5.3.8.1
An entry that turn on/off specific SNMP trap service.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrSnmpTrapEnableEntry  

eocBrSnmpTrapEnableIndex 1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.1
SNMP trap type index to be enabled or disabled .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrSnmpTrapEnableType 1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.2
SNMP trap type to be enabled or disabled .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER logInOut(0), upgrade(1), epStatus(2), epDiagnosis(3), dhcp(4), autoConfig(5)  

eocBrSnmpTrapEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.5.3.8.1.3
Enable or disable this SNMP trap type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrSnmpTrapTable 1.3.6.1.4.1.890.1.15.5.1.5.3.9
A table that contains SNMP trap service information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrSnmpTrapEntry

eocBrSnmpTrapEntry 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1
An entry for SNMP trap service.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrSnmpTrapEntry  

eocBrSnmpTrapIndex 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.1
SNMP trap target index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrSnmpTrapServer 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.2
Destined SNMP trap server name, FQDN or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrSnmpTrapPortNum 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.4
SNMP trap UDP port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrSnmpTrapCommunity 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.5
Community for this SNMP trap.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrSnmpTrapRowStatus 1.3.6.1.4.1.890.1.15.5.1.5.3.9.1.6
To create, delete or modify a SNMP trap entry(one row) in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eocBrSyslogTable 1.3.6.1.4.1.890.1.15.5.1.5.4
A table that contains Syslog service information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrSyslogEntry

eocBrSyslogEntry 1.3.6.1.4.1.890.1.15.5.1.5.4.1
An entry for Syslog service.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrSyslogEntry  

eocBrSyslogIndex 1.3.6.1.4.1.890.1.15.5.1.5.4.1.1
Syslog server index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrSyslogServer 1.3.6.1.4.1.890.1.15.5.1.5.4.1.2
Destined Syslog server name, FQDN or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrSyslogIPAddress 1.3.6.1.4.1.890.1.15.5.1.5.4.1.3
Destined Syslog server IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrSyslogSeverity 1.3.6.1.4.1.890.1.15.5.1.5.4.1.4
Define the Syslog severity level for Syslog server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)  

eocBrSyslogRowStatus 1.3.6.1.4.1.890.1.15.5.1.5.4.1.5
To create, delete or modify a Syslog server entry(one row) in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eocBrSyslogCtrl 1.3.6.1.4.1.890.1.15.5.1.5.6
OBJECT IDENTIFIER    

eocBrSyslogOverTcpUdp 1.3.6.1.4.1.890.1.15.5.1.5.6.1
Running Syslog over UDP(default) or TCP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER udp(0), tcp(1)  

eocBrSyslogPortNum 1.3.6.1.4.1.890.1.15.5.1.5.6.2
Syslog TCP/UDP port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrSntp 1.3.6.1.4.1.890.1.15.5.1.5.5
OBJECT IDENTIFIER    

eocBrSntpEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.5.5.1
Activate SNTP service or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrSntpPrimaryServer 1.3.6.1.4.1.890.1.15.5.1.5.5.2
SNTP server 1, FQDN or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrSntpSecondaryServer 1.3.6.1.4.1.890.1.15.5.1.5.5.3
SNTP server 2, FQDN or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrSntpTimeZone 1.3.6.1.4.1.890.1.15.5.1.5.5.4
SNTP locale time zone.gmt-plus-0800 means 'GMT + 8 hours'. The value in 0~127 is ( GMT + value*15 minutes ); value in 128~256 is ( GMT - (256-value)*15 minutes ).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER gmt(0), gmt-plus-0100(4), gmt-plus-0200(8), gmt-plus-0300(12), gmt-plus-0330(14), gmt-plus-0400(16), gmt-plus-0430(18), gmt-plus-0500(20), gmt-plus-0545(23), gmt-plus-0600(24), gmt-plus-0630(26), gmt-plus-0700(28), gmt-plus-0800(32), gmt-plus-0900(36), gmt-plus-0930(38), gmt-plus-1000(40), gmt-plus-1100(44), gmt-plus-1200(48), gmt-minus-1200(208), gmt-minus-1100(212), gmt-minus-1000(216), gmt-minus-0900(220), gmt-minus-0800(224), gmt-minus-0700(228), gmt-minus-0600(232), gmt-minus-0500(236), gmt-minus-0400(240), gmt-minus-0330(242), gmt-minus-0300(244), gmt-minus-0200(248), gmt-minus-0100(252)  

eocBrSntpQueryPeriodInMinutes 1.3.6.1.4.1.890.1.15.5.1.5.5.5
SNTP queried period, in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrSntpCurrentTime 1.3.6.1.4.1.890.1.15.5.1.5.5.6
SNTP queried time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrEtherQoS 1.3.6.1.4.1.890.1.15.5.1.10.2
OBJECT IDENTIFIER    

eocBrTcpUdpPriTable 1.3.6.1.4.1.890.1.15.5.1.10.2.2
A table that maps packets with specified TCP/UDP port number to prioritized Queues for QoS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrTcpUdpPriEntry

eocBrTcpUdpPriEntry 1.3.6.1.4.1.890.1.15.5.1.10.2.2.1
An entry for mapping one specified TCP/UDP port number to one prioritized Queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrTcpUdpPriEntry  

eocBrTcpUdpRuleNum 1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.1
TCP/UDP rule numbering value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrTcpUdpEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.2
Enable TCP/UDP port priority or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrTcpUdpPortNum 1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.3
Specify the TCP/UDP port number to be mapped.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrTcpUdpMappedQueue 1.3.6.1.4.1.890.1.15.5.1.10.2.2.1.4
Specify the mapped Queue for the TCP/UDP port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER q0(0), q1(1), q2(2), q3(3)  

eocBrQueueSchType 1.3.6.1.4.1.890.1.15.5.1.10.2.3
The packets priority queue scheduling mechanism. There are 3 different modes: 'Strict priority(SP)', 'Weighted fair queue(WFR)' and 'Mixed SP & WFR'. SP: Packets residing in the higher priority queues transmit first. Lower priority packets transmit once these queues are emptied. Highest priority Q3 goes first always, follows Q2 if Q3 is empty, then Q1 and lowest Q0. WFR:Each queue is assigned a service weight ratio that determines how many packets are sent from it. Weight is fixed at 8:4:2:1 for Q3:Q2:Q1:Q0. MIX:Highest priority Q3 use SP, and other queues conform to WFR at 4:2:1 weight.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(0), wfq(1), mix(2)  

eocBrPriSchemeSelect 1.3.6.1.4.1.890.1.15.5.1.10.2.4
Setup which packet field for priority queue mapping. 802.1p:Based on packet's 802.1p field for priority queue mapping. 7/6 goes to Q3 (highest priority), 5/4 to Q2, 3/2 to Q1, 1/0 to Q0(lowest priority). IP: Based on packet's IP TOS/TC or DSCP field for priority queue mapping. The precedence 2 bits in this field (DSCP/TOS/TC) decide the destined priority queue (Q3/Q2/Q1/Q0). b'11 goes to Q3, b'10 to Q2, b01 to Q1, and b'00 to Q0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER use8021p(0), useIP(1)  

eocBrMasterMac 1.3.6.1.4.1.890.1.15.5.1.7.1
The Master device EoC Mac address. Usually refers the managed bridge itself EoC interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrMasterNote 1.3.6.1.4.1.890.1.15.5.1.7.2
Footnote for the Master device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrMasterModel 1.3.6.1.4.1.890.1.15.5.1.7.3
The Master device model. Usually the management bridge itself.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER eOC350-TS(9076), eOC350-TS(9075), eOC350-TS(9876), eOC350-TS(9875)  

eocBrMasterProductName 1.3.6.1.4.1.890.1.15.5.1.7.4
The Master device product name. Usually the management bridge itself.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrMasterWorkingPrivacyMode 1.3.6.1.4.1.890.1.15.5.1.7.5
Display the current/queried/working 'Privacy Mode' of Master device. If 'Privacy Mode' is on, the Master device will check if its 'Privacy Key' matches with the EP device's 'Privacy Key' to accept EP device's packets. If 'Privacy Mode' is off instead, Master device will accept connection from EP device without checking 'Privacy Key'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

eocBrMasterSettingPrivacyMode 1.3.6.1.4.1.890.1.15.5.1.7.6
For Master device to activate 'Privacy Mode' or not ? Decide if the Master device need to check EP device's 'Privacy Key' to allow connection. Changed 'Privacy Mode' will take effect after upgrading Master device driver. (replace eocBrMasterWorkingPrivacyMode with eocBrMasterSettingPrivacyMode after eocBrMasterDrvUpgradeAction completes).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

eocBrMasterWorkingPrivacyKey 1.3.6.1.4.1.890.1.15.5.1.7.7
Display the current/queried/working 'Privacy Key' of Master device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrMasterSettingPrivacyKey 1.3.6.1.4.1.890.1.15.5.1.7.8
To setup the 'Privacy Key' for Master device and other connected EP devices. Changed 'Privacy Key' will take effect after upgrading 'Master/EP' device driver. (activate eocBrMasterDrvUpgradeAction/eocBrEPDrvUpgradeAction to replace eocBrMasterWorkingPrivacyKey/eocBrEPWorkingPrivacyKey with eocBrMasterSettingPrivacyKey).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrMasterDrvWorkingVersion 1.3.6.1.4.1.890.1.15.5.1.7.9
Identify the working/running driver version of the EoC chipset resides in the Master device. Normally the bridge itself is selected as the Master device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrMasterDrvUploadVersion 1.3.6.1.4.1.890.1.15.5.1.7.10
Identify the stored Master driver version intended for upgrading the EoC chipset of the Master device . The driver is placed in the 'upload' area temporarily and is uploaded by TFTP or HTTP first.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrMasterDrvUpgradeAction 1.3.6.1.4.1.890.1.15.5.1.7.11
To trigger upgrade operation of the Master device to replace the current driver (version eocBrMasterWorkingEoCDrvVer) with the new uploaded driver (version eocBrMasterUploadEoCDrvVer). The SNMP manager can upgrade the EoC Master device by set the value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrMasterDrvUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrMasterDrvUpgradeStatus 1.3.6.1.4.1.890.1.15.5.1.7.12
Status for upgrade operation of the Master device to replace the current driver (version eocBrMasterWorkingEoCDrvVer) with the new uploaded driver (version eocBrMasterUploadEoCDrvVer). The SNMP manager can upgrade the EoC Master device by set the eocBrMasterDrvUpgradeAction value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrMasterDrvUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrMasterScanEPAction 1.3.6.1.4.1.890.1.15.5.1.7.13
To trigger scan operation issued by the Master device to find all the on-line EP devices. That is, force to refresh all EP status. The SNMP manager can set this value to activate(1) to start the scan procedure. The status (eocBrMasterScanEPStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrMasterScanEPStatus 1.3.6.1.4.1.890.1.15.5.1.7.14
Status for scan operation issued by the Master device to find all the on-line EP devices. That is, force to refresh all EP status. The SNMP manager can set the eocBrMasterScanEPAction value to activate(1) to start the scan procedure. The status (eocBrMasterScanEPStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrMasterReboot 1.3.6.1.4.1.890.1.15.5.1.7.15
Activate to reboot the EoC Master device (whole EoC link). Will go back to the initial idle(0) while completes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activateThenReboot(1)  

eocBrEPTable 1.3.6.1.4.1.890.1.15.5.1.8.1
A table that contains EP devices (EndPoint or Slave device) management information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPEntry

eocBrEPEntry 1.3.6.1.4.1.890.1.15.5.1.8.1.1
An entry in the EP management table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPEntry  

eocBrEPIndex 1.3.6.1.4.1.890.1.15.5.1.8.1.1.1
The EP device index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPMac 1.3.6.1.4.1.890.1.15.5.1.8.1.1.2
The EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPNote 1.3.6.1.4.1.890.1.15.5.1.8.1.1.3
Footnote for the EP device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrEPModel 1.3.6.1.4.1.890.1.15.5.1.8.1.1.4
The EP device model.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER eOC350-TA(1073), eOC350-TA(1074), eOC350-TA(10f3), eOC350-TA(10f4), eOC350-TA(12f3), eOC350-TA(12f4)  

eocBrEPProductName 1.3.6.1.4.1.890.1.15.5.1.8.1.1.5
The EP device product name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrEPOnlineStatus 1.3.6.1.4.1.890.1.15.5.1.8.1.1.6
The EP on-line status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

eocBrEPHostCountLimit 1.3.6.1.4.1.890.1.15.5.1.8.1.1.8
Specify the planned allowable maximum number of hosts attached to the EP device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

eocBrEPWorkingPrivacyKeyMatched 1.3.6.1.4.1.890.1.15.5.1.8.1.1.12
Display the status if the EP device's 'Privacy Key' is consistent with Master device's 'Privacy Key'. If 'Privacy Mode' is on, you will need the matched 'Privacy Key' for connection. If 'Privacy Mode' is off, the 'Privacy Key' is irrelevant. Need to upgrade the EP device driver in order to let the EP device have the matched 'Privacy Key' for connection. (activate eocBrEPDrvUpgradeAction to replace EP device's 'Privacy Key' with eocBrMasterSettingPrivacyKey).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

eocBrEPDrvWorkingVersion 1.3.6.1.4.1.890.1.15.5.1.8.1.1.13
The current working/running EoC driver version in the connected EP device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrEPDrvUploadVersion 1.3.6.1.4.1.890.1.15.5.1.8.1.1.14
Identify the stored EP driver version intended for upgrading the EoC chipset of the EP device . The driver is placed in the bridge 'upload' area temporarily and is uploaded by TFTP or HTTP first.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

eocBrEPDrvUpgradeAction 1.3.6.1.4.1.890.1.15.5.1.8.1.1.15
To trigger upgrade operation of the EP devices to replace the current driver (version eocBrEPWorkingEoCDrvVer) with the new uploaded driver (version eocBrEPUploadEoCDrvVer). The SNMP manager can upgrade the EoC EP device by set the value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrEPDrvUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPDrvUpgradeStatus 1.3.6.1.4.1.890.1.15.5.1.8.1.1.16
Status for upgrade operation of the EP devices to replace the current driver (version eocBrEPWorkingEoCDrvVer) with the new uploaded driver (version eocBrEPUploadEoCDrvVer). The SNMP manager can upgrade the EoC EP device by set the eocBrEPDrvUpgradeAction value to activate(1); and submit to the bridge to start the upgrade procedure. The status (eocBrEPDrvUpgradeStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrEPPhyDiagAction 1.3.6.1.4.1.890.1.15.5.1.8.1.1.17
To trigger the physical link diagnosis operation between the Master device and the current selected EP device. The traffic will be ceased during the diagnosis. The diagnosed results may include the SNR/LineRate/PacketErrorRate/RxPower for both the DnLink:'Transmit'(Tx)-to-EP and UpLink:'Receive'(Rx)-from-EP operation. The SNMP manager can set this value to activate(1) to start the diagnosis procedure. The status (eocBrEPPhyDiagStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPPhyDiagStatus 1.3.6.1.4.1.890.1.15.5.1.8.1.1.18
Status for the physical link diagnosis operation between the Master device and the current selected EP device. The diagnosed results include the SNR/LineRate/PacketErrorRate/RxPower for both the DnLink:'Transmit'(Tx)-to-EP and UpLink:'Receive'(Rx)-from-EP operation. The SNMP manager can set the eocBrEPPhyDiagAction value to activate(1) to start the diagnosis procedure. The status (eocBrEPPhyDiagStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrEPDiagDnLinkResult 1.3.6.1.4.1.890.1.15.5.1.8.1.1.19
The result of the DnLink:'Transmit'(Tx)-to-EP diagnosis. Include the following, Signal-to-Noise Ratio(SNR): The reasonable value should fall into 30dB~35dB. Packet-Error-Ratio(PER): 1% means 1 error packet in 100 transmitted packets. Line-Rate: The payload encoded(PE) speed, for example 32*7 is 224Mbps. RxPWR: signal power level at EP receiving -60dBm~+15dBm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eocBrEPDiagUpLinkResult 1.3.6.1.4.1.890.1.15.5.1.8.1.1.20
The result of the UpLink:'Receive'(Rx)-from-EP diagnosis. Include the following, Signal-to-Noise Ratio(SNR): The reasonable value should fall into 30dB~35dB. Packet-Error-Ratio(PER): 1% means 1 error packet in 100 received packets. Line-Rate: The payload encoded(PE) speed, for example 32*7 is 224Mbps. RxPWR: signal power level at Master receiving -60dBm~+15dBm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

eocBrEPOnlineDiagAction 1.3.6.1.4.1.890.1.15.5.1.8.1.1.21
To trigger the alive link diagnosis operation between the Master device and the current selected EP device. Maintain the connection while running the diagnosis. The diagnosed results include the on-line SNR/LineRate/RxPower for both the DnLink:'Transmit'(Tx)-to-EP and UpLink:'Receive'(Rx)-from-EP operation. The SNMP manager can set this value to activate(1) to start the diagnosis procedure. The status (eocBrEPOnlineDiagStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPOnlineDiagStatus 1.3.6.1.4.1.890.1.15.5.1.8.1.1.22
Status for the alive diagnosis operation between the Master device and the current selected EP device. The diagnosed results include the on-line SNR/LineRate/RxPower for both the DnLink:'Transmit'(Tx)-to-EP and UpLink:'Receive'(Rx)-from-EP operation. The SNMP manager can set the eocBrEPOnlineDiagAction value to activate(1) to start the diagnosis procedure. The status (eocBrEPOnlineDiagStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrEPRowStatus 1.3.6.1.4.1.890.1.15.5.1.8.1.1.27
Reduced RowStatus Set to destroy/delete a EP entry (one row) in this table. The on-line EP ('eocBrOnlineStatus' is 'on') can not be destroyed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), destroy(6)  

eocBrEPMacInfoTable 1.3.6.1.4.1.890.1.15.5.1.8.2
A table that contains host Mac information behind each EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPMacInfoEntry

eocBrEPMacInfoEntry 1.3.6.1.4.1.890.1.15.5.1.8.2.1
An entry in the EP host Mac list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPMacInfoEntry  

eocBrEP-Index 1.3.6.1.4.1.890.1.15.5.1.8.2.1.1
The device Mac index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEP-MacType 1.3.6.1.4.1.890.1.15.5.1.8.2.1.2
The device Mac type. 0/1 for EoC device self Mac(EP/Master), 2 for host device (as PC)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ep(0), master(1), host(2)  

eocBrEP-EPMac 1.3.6.1.4.1.890.1.15.5.1.8.2.1.3
The EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEP-HostMac 1.3.6.1.4.1.890.1.15.5.1.8.2.1.4
The host Mac address .
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPScanMacInfo 1.3.6.1.4.1.890.1.15.5.1.8.4
OBJECT IDENTIFIER    

eocBrEPScanMacInfoAction 1.3.6.1.4.1.890.1.15.5.1.8.4.1
To trigger scan operation to refresh the EP device Mac and host Mac list table. That is, force to refresh on-line host device list. The SNMP manager can set this value to activate(1) to start the scan procedure. The status (eocBrEP-ScanMacInfoStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPScanMacInfoStatus 1.3.6.1.4.1.890.1.15.5.1.8.4.2
Status for scan operation to find the EP device Mac and host Mac list table. That is, force to refresh on-line host device list. The SNMP manager can set the (eocBrEP-ScanMacInfoAction) value to activate(1) to start the scan procedure. The status (eocBrEP-ScanMacInfoStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrEPNetPerTable 1.3.6.1.4.1.890.1.15.5.1.8.3
A table that contains EP device line condition monitored by tool NetPer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPNetPerEntry

eocBrEPNetPerEntry 1.3.6.1.4.1.890.1.15.5.1.8.3.1
An entry in the EP NetPer table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPNetPerEntry  

eocBrEPNetPerIndex 1.3.6.1.4.1.890.1.15.5.1.8.3.1.1
The EP device index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPNetPerEPMac 1.3.6.1.4.1.890.1.15.5.1.8.3.1.2
The EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPNetPerDnLinkSNR 1.3.6.1.4.1.890.1.15.5.1.8.3.1.3
The diagnosed down-link SNR(Signal-to-Noise Ratio, unit dB) of the 'Transmit'(Tx) to EP operation. It is equivalent to on-line Tx SNR in 'eocBrEPOnlineDiagStatus'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPNetPerUpLinkSNR 1.3.6.1.4.1.890.1.15.5.1.8.3.1.4
The diagnosed up-link SNR(Signal-to-Noise Ratio, unit dB) of the 'Receive'(Rx) from EP operation. It is equivalent to on-line Rx SNR in 'eocBrEPOnlineDiagStatus'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPNetPerDnLinkRate 1.3.6.1.4.1.890.1.15.5.1.8.3.1.5
The down-link payload encoded(PE) line(phy) speed (unit Mbps) in the 'Transmit'(Tx) to EP operation. For example, 224 tells the Tx rate is 224Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPNetPerUpLinkRate 1.3.6.1.4.1.890.1.15.5.1.8.3.1.6
The up-link payload encoded(PE) line(phy) speed (unit Mbps) in 'Receive'(Rx) from EP operation. For example, 224 tells the Rx rate is 224Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPNetPerDnLinkRxPwr 1.3.6.1.4.1.890.1.15.5.1.8.3.1.7
The receiving down-link signal power level at EP side (Master Tx to EP), ranges -60dBm~+15dBm normally.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -127..128  

eocBrEPNetPerUpLinkRxPwr 1.3.6.1.4.1.890.1.15.5.1.8.3.1.8
The receiving up-link signal power level at Master side (Master Rx from EP), ranges -60dBm~+15dBm normally.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -127..128  

eocBrEPPayloadEncodeTable 1.3.6.1.4.1.890.1.15.5.1.8.5
A table that contains EP device payload encoded channel rate.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPPayloadEncodeEntry

eocBrEPPayloadEncodeEntry 1.3.6.1.4.1.890.1.15.5.1.8.5.1
An entry in the EP payload encoded channel rate table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPPayloadEncodeEntry  

eocBrEPPayloadEncodeIndex 1.3.6.1.4.1.890.1.15.5.1.8.5.1.1
The EP device index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPayloadEncodeEPMac 1.3.6.1.4.1.890.1.15.5.1.8.5.1.2
The EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPPayloadEncodeDnRate 1.3.6.1.4.1.890.1.15.5.1.8.5.1.3
The down-link payload encoded channel rate(as line rate, unis is Mbps) from Master toward EP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPayloadEncodeUpRate 1.3.6.1.4.1.890.1.15.5.1.8.5.1.4
The up-link payload encoded channel rate(as line rate, unit is Mbps) from EP toward Master.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrTFTPServerIPAddress 1.3.6.1.4.1.890.1.15.5.1.9.1
The IP address of a TFTP server, from which the management bridge can Get the firmware/driver image file. Image file will first upload to the management bridge itself, then activate the upgrade procedure to replace the working image with the uploaded one. The TFTP Get procedure may be initiated by setting the eocBrTFTPGetAction to activate(1).
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

eocBrTFTPServer 1.3.6.1.4.1.890.1.15.5.1.9.6
TFTP server name, FQDN or IP address.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrTFTPExtensionPath 1.3.6.1.4.1.890.1.15.5.1.9.5
The extension directory path of the file to retrieve (TFTP Get) at the TFTP server whose address is given by eocBrTFTPServer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

eocBrTFTPFilename 1.3.6.1.4.1.890.1.15.5.1.9.2
The name of the firmware/driver image file to retrieve (TFTP Get) at the TFTP server whose address is given by eocBrTFTPServer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

eocBrTFTPGetAction 1.3.6.1.4.1.890.1.15.5.1.9.3
To trigger TFTP Get operation, the SNMP manager need to set the value to activate(1); and submit to the bridge to start the TFTP Get procedure. The status (eocBrTFTPGetStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status. TFTP Get will attempt to retrieve a firmware/driver file from the TFTP server whose address is given by eocBrTFTPServer. The filename is given by eocBrTFTPFilename. Both eocBrTFTPServer and eocBrTFTPFilename must be correct for the TFTP operation to proceed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrTFTPGetStatus 1.3.6.1.4.1.890.1.15.5.1.9.4
Status for the TFTP Get operation, the SNMP manager need to set the eocBrTFTPGetAction value to activate(1); and submit to the bridge to start the TFTP Get procedure. The status (eocBrTFTPGetStatus) will go from inProgress(1) status back to the initial normalOrComplete(0) status. TFTP Get will attempt to retrieve a firmware/driver file from the TFTP server whose address is given by eocBrTFTPServer. The filename is given by eocBrTFTPFilename. Both eocBrTFTPServer and eocBrTFTPFilename must be correct for the TFTP operation to proceed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normalOrComplete(0), inProgress(1), failed(2)  

eocBrEtherIGMPSnoop 1.3.6.1.4.1.890.1.15.5.1.10.3
OBJECT IDENTIFIER    

eocBrIGMPSnoopEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.10.3.1
Enable IGMP v1/v2 Snooping or not. Not support IGMP v3 Snooping.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEtherTagVLAN 1.3.6.1.4.1.890.1.15.5.1.10.4
OBJECT IDENTIFIER    

eocBrTagVLANEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.10.4.1
Enable Tagged VLAN(802.1Q) or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrTagPortTable 1.3.6.1.4.1.890.1.15.5.1.10.4.2
Table of Ethernet Tagged VLAN(802.1Q) information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrTagPortEntry

eocBrTagPortEntry 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1
An entry in the Ethernet Tagged VLAN(802.1Q) table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrTagPortEntry  

eocBrTagPortPID 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.1
Port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrTagPortType 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.2
Port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrTagPortPriority 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.3
The default 802.1p priority value of current port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

eocBrTagPortVID 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.4
The default VLAN ID (VID) of current port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

eocBrTagPortInRule 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.5
Defines the 'action' (ingress rule) on packet enters current port. all(0)->accept all(untagged/tagged) pkt and tag the untagged pkt. tag(1)->accept tagged pkt only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), tag(1)  

eocBrTagPortOutRule 1.3.6.1.4.1.890.1.15.5.1.10.4.2.1.6
Defines the 'action' (egress rule) on packet output from current port. untag(0)-> remove tag from tagged pkt. tag(1)-> tag all output pkt. bypass(2)-> pass through either tagged or untagged pkt.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER untag(0), tag(1), bypass(2)  

eocBrEtherCascadeLan 1.3.6.1.4.1.890.1.15.5.1.10.5
OBJECT IDENTIFIER    

eocBrCascadeMode 1.3.6.1.4.1.890.1.15.5.1.10.5.1
Enable to cascade multiple bridges via port LAN2 and LAN1, alike daisy chain. mode 0: disable mode 1: LAN1 as downstream Link and LAN2 as upstream link mode 2: LAN2 as downstream Link and LAN1 as upstream link mode 3: downstream Link and upstream link are decided by STP automatically (STP: spanning tree protocol)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), downLinkLAN1-upLinkLAN2(1), downLinkLAN2-upLinkLAN1(2), autoBySTP(3)  

eocBrEPDesignate 1.3.6.1.4.1.890.1.15.5.1.11.1
OBJECT IDENTIFIER    

eocBrEPDesignateTable 1.3.6.1.4.1.890.1.15.5.1.11.1.1
A table that contains EP for selection/choosing to be managed by eocBrEPEtherGroup.eocBrEPEtherPort SNMP management items.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPDesignateEntry

eocBrEPDesignateEntry 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1
An entry in the EP selection/choosing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPDesignateEntry  

eocBrEPDesignateEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPDesignateEPMac 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.2
The EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPDesignateOnlineStatus 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.3
The EP device on-line status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), on(1)  

eocBrEPDesignateDeviceVersion 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.4
The EP device hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrEPDesignateIsSmart 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.6
Is it the Smart EP ? Only the Smart EP device is configurable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1), unknown(255)  

eocBrEPDesignateIsTarget 1.3.6.1.4.1.890.1.15.5.1.11.1.1.1.7
Choose the target -- designate the EP device for applying SNMP management to its Ethernet port properties.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

eocBrEPEtherPort 1.3.6.1.4.1.890.1.15.5.1.11.2
OBJECT IDENTIFIER    

eocBrEPPortPropTable 1.3.6.1.4.1.890.1.15.5.1.11.2.1
A table that contains designated EP Ethernet port properties.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPPortPropEntry

eocBrEPPortPropEntry 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1
An entry in the designated EP port properties table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPPortPropEntry  

eocBrEPPortPropEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPortPropPID 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.2
Designated EP port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPortPropEPMac 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.3
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPPortPropType 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.4
Designated EP port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrEPPortPropConfig 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.5
Configure designated EP Ethernet port properties.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autoNegotiation(0), fullDuplex100Mbps(1), halfDuplex100Mbps(2), fullDuplex10Mbps(3), halfDuplex10Mbps(4)  

eocBrEPPortPropLinkStatus 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.6
Designated EP Ethernet port current link status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(0), fullDuplex100Mbps(1), halfDuplex100Mbps(2), fullDuplex10Mbps(3), halfDuplex10Mbps(4)  

eocBrEPPortPropFlowCtrl 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.7
Configure designated EP Ethernet port flow control.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

eocBrEPPortPropInRateCtrl 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.8
Enable/disable the maximum input(ingress) rate control for the designated EP port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPPortPropInRate 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.9
Configure the maximum input(ingress) rate in 64kbps (n*64kbps)for the designated EP port. (maximum bandwidth between 0~100Mbps) For example, value '0' will shut it off and value '4' means the maximum rate is '4*64k=256kbps'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1563  

eocBrEPPortPropOutRateCtrl 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.10
Enable/disable the maximum output(egress) rate control for the designated EP port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPPortPropOutRate 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.11
Configure the maximum output(egress) rate in 64kbps (n*64kbps)for the designated EP port. (maximum bandwidth between 0~100Mbps) . For example, value '0' will shut it off and value '4' means the maximum rate is '4*64k=256kbps'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1563  

eocBrEPPortPropEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.11.2.1.1.12
Enable current designated EP Ethernet port or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPPortStatsTable 1.3.6.1.4.1.890.1.15.5.1.11.2.2
A table that contains EP port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPPortStatsEntry

eocBrEPPortStatsEntry 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1
An entry in the EP port statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPPortStatsEntry  

eocBrEPPortStatsEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPortStatsPID 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.2
Designated EP port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPortStatsEPMac 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.3
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPPortStatsType 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.4
Designated EP port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrEPPortStatsRxPkts 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.5
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPPortStatsRxBytes 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.6
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPPortStatsTxPkts 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.7
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPPortStatsTxBytes 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.8
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPPortStatsCollisions 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.9
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPPortStatsErrors 1.3.6.1.4.1.890.1.15.5.1.11.2.2.1.10
Designated EP port statistics.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

eocBrEPStatsCtrlTable 1.3.6.1.4.1.890.1.15.5.1.11.2.3
A table of designated EP statistics control.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPStatsCtrlEntry

eocBrEPStatsCtrlEntry 1.3.6.1.4.1.890.1.15.5.1.11.2.3.1
An entry in designated EP statistics control table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPStatsCtrlEntry  

eocBrEPStatsCtrlEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPStatsCtrlEPMac 1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPStatsCtrlReset 1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.3
To clear/reset designated EP statistics, the SNMP manager need to set the value to activate(1); and submit to the bridge to clear designated EP statistics. The value will back to idle(0) once reset has completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPStatsCtrlRefresh 1.3.6.1.4.1.890.1.15.5.1.11.2.3.1.4
To refresh/reload designated EP statistics, the SNMP manager need to set the value to activate(1); and submit to the bridge to refresh designated EP statistics. The value will back to idle(0) once completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPEtherQoS 1.3.6.1.4.1.890.1.15.5.1.11.3
OBJECT IDENTIFIER    

eocBrEPTcpUdpPriTable 1.3.6.1.4.1.890.1.15.5.1.11.3.2
A table that maps packets with specified TCP/UDP port number to prioritized Queues for QoS in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPTcpUdpPriEntry

eocBrEPTcpUdpPriEntry 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1
An entry for mapping one specified TCP/UDP port number to one prioritized Queue in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPTcpUdpPriEntry  

eocBrEPTcpUdpEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPTcpUdpRuleNum 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.2
TCP/UDP port number index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPTcpUdpEPMac 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.3
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPTcpUdpEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.4
Enable TCP/UDP port priority or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPTcpUdpPortNum 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.5
Specify the TCP/UDP port number to be mapped.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

eocBrEPTcpUdpMappedQueue 1.3.6.1.4.1.890.1.15.5.1.11.3.2.1.6
Specify the mapped Queue for the TCP/UDP port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER q0(0), q1(1), q2(2), q3(3)  

eocBrEPQueueSchTable 1.3.6.1.4.1.890.1.15.5.1.11.3.3
A table that maps priority queue scheduling mechanism in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPQueueSchEntry

eocBrEPQueueSchEntry 1.3.6.1.4.1.890.1.15.5.1.11.3.3.1
An entry that maps priority queue scheduling mechanism in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPQueueSchEntry  

eocBrEPQueueSchEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPQueueSchEPMac 1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPQueueSchType 1.3.6.1.4.1.890.1.15.5.1.11.3.3.1.3
The packets priority queue scheduling mechanism. There are 3 different modes: 'Strict priority(SP)', 'Weighted fair queue(WFR)' and 'Mixed SP & WFR'. SP: Packets residing in the higher priority queues transmit first. Lower priority packets transmit once these queues are emptied. Highest priority Q3 goes first always, follows Q2 if Q3 is empty, then Q1 and lowest Q0. WFR:Each queue is assigned a service weight ratio that determines how many packets are sent from it. Weight is fixed at 8:4:2:1 for Q3:Q2:Q1:Q0. MIX:Highest priority Q3 use SP, and other queues conform to WFR at 4:2:1 weight.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strict(0), wfq(1), mix(2)  

eocBrEPPriSchemeTable 1.3.6.1.4.1.890.1.15.5.1.11.3.4
A table of priority scheme in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPPriSchemeEntry

eocBrEPPriSchemeEntry 1.3.6.1.4.1.890.1.15.5.1.11.3.4.1
An entry of priority scheme in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPPriSchemeEntry  

eocBrEPPriSchemeEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPPriSchemeEPMac 1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPPriSchemeSelect 1.3.6.1.4.1.890.1.15.5.1.11.3.4.1.3
Setup which packet field for priority queue mapping. 802.1p:Based on packet's 802.1p field for priority queue mapping. 7/6 goes to Q3 (highest priority), 5/4 to Q2, 3/2 to Q1, 1/0 to Q0(lowest priority). IP: Based on packet's IP TOS/TC or DSCP field for priority queue mapping. The precedence 2 bits in this field (DSCP/TOS/TC) decide the destined priority queue (Q3/Q2/Q1/Q0). b'11 goes to Q3, b'10 to Q2, b01 to Q1, and b'00 to Q0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER use8021p(0), useIP(1)  

eocBrEPEtherIGMPSnoop 1.3.6.1.4.1.890.1.15.5.1.11.4
OBJECT IDENTIFIER    

eocBrEPIGMPSnoopTable 1.3.6.1.4.1.890.1.15.5.1.11.4.1
Table of designated EP Ethernet IGMP Snooping config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPIGMPSnoopEntry

eocBrEPIGMPSnoopEntry 1.3.6.1.4.1.890.1.15.5.1.11.4.1.1
An entry in the designated EP Ethernet IGMP Snooping config table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPIGMPSnoopEntry  

eocBrEPIGMPSnoopEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPIGMPSnoopEPMac 1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPIGMPSnoopEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.11.4.1.1.3
Enable IGMP v1/v2 Snooping or not in EP. Not support IGMP v3 Snooping.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPEtherTagVLAN 1.3.6.1.4.1.890.1.15.5.1.11.5
OBJECT IDENTIFIER    

eocBrEPTagVLANCtrlTable 1.3.6.1.4.1.890.1.15.5.1.11.5.1
Table of designated EP Ethernet Tag VLAN enable control.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPTagVLANCtrlEntry

eocBrEPTagVLANCtrlEntry 1.3.6.1.4.1.890.1.15.5.1.11.5.1.1
An entry in the designated EP Ethernet Tag VLAN enable control table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPTagVLANCtrlEntry  

eocBrEPTagVLANEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPTagVLANEPMac 1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPTagVLANEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.11.5.1.1.3
Enable EP Tagged VLAN(802.1Q) or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPTagPortTable 1.3.6.1.4.1.890.1.15.5.1.11.5.2
Table of designated EP Ethernet Tagged VLAN(802.1Q) information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPTagPortEntry

eocBrEPTagPortEntry 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1
An entry in the designated EP Ethernet Tagged VLAN(802.1Q) table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPTagPortEntry  

eocBrEPTagPortEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPTagPortPID 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.2
EP port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPTagPortEPMac 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.3
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPTagPortType 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.4
EP port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ethernet(0), coax(1), phoneLine(2)  

eocBrEPTagPortPriority 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.5
The default 802.1p priority value of current EP port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

eocBrEPTagPortVID 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.6
The default VLAN ID (VID) of current EP port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

eocBrEPTagPortInRule 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.7
Defines the 'action' (ingress rule) on packet enters current EP port. all(0)->accept all(untagged/tagged) pkt and tag the untagged pkt. tag(1)->accept tagged pkt only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), tag(1)  

eocBrEPTagPortOutRule 1.3.6.1.4.1.890.1.15.5.1.11.5.2.1.8
Defines the 'action' (egress rule) on packet output from current EP port. untag(0)-> remove tag from tagged pkt. tag(1)-> tag all output pkt. bypass(2)-> pass through either tagged or untagged pkt.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER untag(0), tag(1), bypass(2)  

eocBrEPCtrl 1.3.6.1.4.1.890.1.15.5.1.11.6
OBJECT IDENTIFIER    

eocBrEPCtrlTable 1.3.6.1.4.1.890.1.15.5.1.11.6.1
Table of designated EP 'Ethernet default configuration operation' or 'reboot operation'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPCtrlEntry

eocBrEPCtrlEntry 1.3.6.1.4.1.890.1.15.5.1.11.6.1.1
An entry in the designated EP control table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPCtrlEntry  

eocBrEPCtrlEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPCtrlEPMac 1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.2
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPCtrlEtherDefault 1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.3
To reset designated EP Ethernet configuration to factory default, the SNMP manager need to set the value to activate(1); and submit to the bridge to reset destined designated EP configuration. The value will back to idle(0)once completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activate(1)  

eocBrEPCtrlReboot 1.3.6.1.4.1.890.1.15.5.1.11.6.1.1.4
To reboot designated EP, the SNMP manager need to set the value to activateThenReboot(1); and submit to the bridge to reboot destined designated EP. The value will back to idle(0) once completed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), activateThenReboot(1)  

eocBrEPHostMacFilter 1.3.6.1.4.1.890.1.15.5.1.11.7
OBJECT IDENTIFIER    

eocBrEPHostMacFilterTable 1.3.6.1.4.1.890.1.15.5.1.11.7.1
Table of allowable host Mac(s) in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EoCBrEPHostMacFilterEntry

eocBrEPHostMacFilterEntry 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1
An entry for allowable host Mac in designated EP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EoCBrEPHostMacFilterEntry  

eocBrEPHostMacFilterEPIndex 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.1
Designate EP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPHostMacFilterSetNum 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.2
Mac filter set index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eocBrEPHostMacFilterEPMac 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.3
The designated EP device Mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

eocBrEPHostMacFilterEnableCtrl 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.4
Tell current host Mac filter set status -- enable(not null MAC) or disable(null MAC). Host Mac filter function will be off if none Mac filter set exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eocBrEPHostMacFilterHostMac 1.3.6.1.4.1.890.1.15.5.1.11.7.1.1.5
Specify the allowable host Mac. Set to null MAC(00-00-00-00-00-00) to disable current entry. Host Mac filter function will be off if none Mac filter set exists.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

eocBrHttpLoginNotification 1.3.6.1.4.1.890.1.15.5.3.1
A user login to the Master by HTTP.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrHttpLogoutNotification 1.3.6.1.4.1.890.1.15.5.3.2
A user logout to Master by HTTP.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrHttpLoginAuthFailedNotification 1.3.6.1.4.1.890.1.15.5.3.3
A failed login by HTTP with invalid username/password.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrTelnetLoginNotification 1.3.6.1.4.1.890.1.15.5.3.4
A user login to the Master by TELNET.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrTelnetLogoutNotification 1.3.6.1.4.1.890.1.15.5.3.5
A user logout to Master by TELNET.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrTelnetLoginAuthFailedNotification 1.3.6.1.4.1.890.1.15.5.3.6
A failed login by TELNET with invalid username/password.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrSystemFwUpgradeNotification 1.3.6.1.4.1.890.1.15.5.3.11
Upgrade system firmware.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrDhcpClientAckNotification 1.3.6.1.4.1.890.1.15.5.3.21
Master gets IP by DHCP client.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrHostDhcpClientAckNotification 1.3.6.1.4.1.890.1.15.5.3.23
Host@EP gets IP via DHCP.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrAutoConfigTFTPGetOkNotification 1.3.6.1.4.1.890.1.15.5.3.27
Upload file to Master by TFTP for Auto Configuration, success.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrAutoConfigTFTPGetErrorNotification 1.3.6.1.4.1.890.1.15.5.3.28
Upload/Parse file error to Master by TFTP for Auto Configuration.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrMasterDrvUpgradeNotification 1.3.6.1.4.1.890.1.15.5.3.71
Upgrade EoC Master driver.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrEPDrvUpgradeNotification 1.3.6.1.4.1.890.1.15.5.3.81
Upgrade EoC EP driver.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrEPOnlineStatusNotification 1.3.6.1.4.1.890.1.15.5.3.82
EP on-line status changed.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrEPDiagResultNotification 1.3.6.1.4.1.890.1.15.5.3.83
EP diagnosis report.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrTFTPGetOkNotification 1.3.6.1.4.1.890.1.15.5.3.91
Upload file to Master by TFTP, success.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrTFTPGetErrorNotification 1.3.6.1.4.1.890.1.15.5.3.92
Upload file to Master by TFTP, failed.
Status: current Access: read-write
NOTIFICATION-TYPE    

eocBrHTTPGetNotification 1.3.6.1.4.1.890.1.15.5.3.51
Upload file to Master by HTTP.
Status: current Access: read-write
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor