ZXR10-LSP-PING-MIB

File: ZXR10-LSP-PING-MIB.mib (16965 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ZXR10-SMI
IPV6-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 IpAddress
TruthValue DisplayString zxr10L2vpn
Ipv6Address

Defined Types

LspPingEntry  
SEQUENCE    
  lspPingSerial Integer32
  lspPingType INTEGER
  lspPingLdpPrefix IpAddress
  lspPingLdpPrefixlen Integer32
  lspPingMplsTeTunnelIfName DisplayString
  lspPingPwDestAddr IpAddress
  lspPingPwDestVcId Unsigned32
  lspPingIfOption INTEGER
  lspPingPacketCount Integer32
  lspPingTimeOut Integer32
  lspPingDataLen Integer32
  lspPingTrapOncompletion TruthValue
  lspPingRosStatus INTEGER
  lspPingEntryOwner DisplayString
  lspPingPwType INTEGER
  lspPingPwName DisplayString
  zxr10LspPingPwMultiSegment TruthValue
  zxr10LspPingLspType INTEGER
  zxr10LspPingV6LdpPrefix Ipv6Address
  zxr10LspPingV6LdpPrefixlen Integer32
  zxr10LspPingSrcIpAddr IpAddress
  zxr10LspPingV6SrcIpAddr Ipv6Address
  zxr10LspPingOutInterface DisplayString
  zxr10LspPingTtl Integer32
  zxr10LspPingReplyMode INTEGER
  zxr10lspPingPwPeerAddr IpAddress
  zxr10lspPingPwPeerVcId Unsigned32

LspPingResultEntry  
SEQUENCE    
  lspPingResultSerial Integer32
  lspPingResultSentPkts Integer32
  lspPingResultRcvPkts Integer32
  lspPingResultRoundTripMinTime Integer32
  lspPingResultRoundTripMaxTime Integer32
  lspPingResultRoundTripAvgTime Integer32
  lspPingResultEntryOwner DisplayString
  lspPingResultRoundWobbleMinTime Integer32
  lspPingResultRoundWobbleMaxTime Integer32
  lspPingResultRoundWobbleAvgTime Integer32

Defined Values

zxr10LspPingMIB 1.3.6.1.4.1.3902.3.104.5
ZTE LSP-PING MIB
MODULE-IDENTITY    

lspPingTable 1.3.6.1.4.1.3902.3.104.5.1
lsp ping information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LspPingEntry

lspPingEntry 1.3.6.1.4.1.3902.3.104.5.1.1
lsp ping entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  LspPingEntry  

lspPingSerial 1.3.6.1.4.1.3902.3.104.5.1.1.1
lsp ping serial number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingType 1.3.6.1.4.1.3902.3.104.5.1.1.2
lsp ping type (0:ldp,1:rsvpTe,2:vccv,3:v6ldp)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ldp(0), rsvpTe(1), vccv(2), v6ldp(3)  

lspPingLdpPrefix 1.3.6.1.4.1.3902.3.104.5.1.1.3
ldp prefix
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lspPingLdpPrefixlen 1.3.6.1.4.1.3902.3.104.5.1.1.4
ldp prefix length
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

lspPingMplsTeTunnelIfName 1.3.6.1.4.1.3902.3.104.5.1.1.5
tunnel name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

lspPingPwDestAddr 1.3.6.1.4.1.3902.3.104.5.1.1.8
vccv target address
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

lspPingPwDestVcId 1.3.6.1.4.1.3902.3.104.5.1.1.9
target vc id
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

lspPingIfOption 1.3.6.1.4.1.3902.3.104.5.1.1.11
if select option, default:none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), option(1)  

lspPingPacketCount 1.3.6.1.4.1.3902.3.104.5.1.1.12
send packets count, default:5
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

lspPingTimeOut 1.3.6.1.4.1.3902.3.104.5.1.1.13
timeout, default:2
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..60  

lspPingDataLen 1.3.6.1.4.1.3902.3.104.5.1.1.14
data length, default:120
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..1500  

lspPingTrapOncompletion 1.3.6.1.4.1.3902.3.104.5.1.1.15
if trap
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

lspPingRosStatus 1.3.6.1.4.1.3902.3.104.5.1.1.16
Controls to start lsp ping
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notActive(1), startPing(2), pingProcessing(3), pingCompleted(4)  

lspPingEntryOwner 1.3.6.1.4.1.3902.3.104.5.1.1.17
lsp ping entry owner
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

lspPingPwType 1.3.6.1.4.1.3902.3.104.5.1.1.18
pw type:ehter-vlan(0),ether(1),default (0)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER etherVlan(0), ether(1)  

lspPingPwName 1.3.6.1.4.1.3902.3.104.5.1.1.19
pw name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10LspPingPwMultiSegment 1.3.6.1.4.1.3902.3.104.5.1.1.20
Indicate if the pw is multi-segment or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

zxr10LspPingLspType 1.3.6.1.4.1.3902.3.104.5.1.1.21
te-tunnel lsp type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER master(1), slave(2), tunnel(3)  

zxr10LspPingV6LdpPrefix 1.3.6.1.4.1.3902.3.104.5.1.1.22
ldp IPv6 prefix
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

zxr10LspPingV6LdpPrefixlen 1.3.6.1.4.1.3902.3.104.5.1.1.23
ldp IPv6 prefix length
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..128  

zxr10LspPingSrcIpAddr 1.3.6.1.4.1.3902.3.104.5.1.1.24
source IP address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zxr10LspPingV6SrcIpAddr 1.3.6.1.4.1.3902.3.104.5.1.1.25
IPv6 source IP address
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

zxr10LspPingOutInterface 1.3.6.1.4.1.3902.3.104.5.1.1.26
out interface for tracing packets
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10LspPingTtl 1.3.6.1.4.1.3902.3.104.5.1.1.27
ttl
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

zxr10LspPingReplyMode 1.3.6.1.4.1.3902.3.104.5.1.1.28
ReplyMode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notReply(1), ip(2), routerAlert(3), applicationChannel(4)  

zxr10lspPingPwPeerAddr 1.3.6.1.4.1.3902.3.104.5.1.1.29
vccv target address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zxr10lspPingPwPeerVcId 1.3.6.1.4.1.3902.3.104.5.1.1.30
target vc id
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

lspPingResultTable 1.3.6.1.4.1.3902.3.104.5.2
lsp ping result table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LspPingResultEntry

lspPingResultEntry 1.3.6.1.4.1.3902.3.104.5.2.1
lsp ping result entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  LspPingResultEntry  

lspPingResultSerial 1.3.6.1.4.1.3902.3.104.5.2.1.1
lsp ping result serial number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultSentPkts 1.3.6.1.4.1.3902.3.104.5.2.1.2
send packet
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRcvPkts 1.3.6.1.4.1.3902.3.104.5.2.1.3
receive packet
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRoundTripMinTime 1.3.6.1.4.1.3902.3.104.5.2.1.4
min RTT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRoundTripMaxTime 1.3.6.1.4.1.3902.3.104.5.2.1.5
max RTT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRoundTripAvgTime 1.3.6.1.4.1.3902.3.104.5.2.1.6
average RTT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultEntryOwner 1.3.6.1.4.1.3902.3.104.5.2.1.9
entry owner
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

lspPingResultRoundWobbleMinTime 1.3.6.1.4.1.3902.3.104.5.2.1.10
max RWT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRoundWobbleMaxTime 1.3.6.1.4.1.3902.3.104.5.2.1.11
max RWT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lspPingResultRoundWobbleAvgTime 1.3.6.1.4.1.3902.3.104.5.2.1.12
average RWT
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lsppingNotifications 1.3.6.1.4.1.3902.3.104.5.3
OBJECT IDENTIFIER    

lsppingTrapResult 1.3.6.1.4.1.3902.3.104.5.3.1
The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
Status: current Access: read-only
NOTIFICATION-TYPE