ZXR10-CONFIG-MAN-MIB

File: ZXR10-CONFIG-MAN-MIB.mib (7943 bytes)

Imported modules

SNMPv2-SMI IPV6-TC SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Unsigned32 enterprises
Ipv6Address DateAndTime

Defined Values

zxr10ConfigManMIB 1.3.6.1.4.1.3902.3.6000.90
this MIB intends to include only such operations as clearly relate to configuration. Its primary emphasis is to track changes and saves of the running configuration. Information from zxcmConfigTraceTable can be used to track the exact configuration changes that took place within a particular Configuration History event. NMS' can use this information to update the related components.
MODULE-IDENTITY    

zte 1.3.6.1.4.1.3902
OBJECT IDENTIFIER    

zte10 1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10RosngMIB 1.3.6.1.4.1.3902.3.6000
OBJECT IDENTIFIER    

zxr10ConfigManGlobalObjects 1.3.6.1.4.1.3902.3.6000.90.1
OBJECT IDENTIFIER    

zxr10ConfigManObjects 1.3.6.1.4.1.3902.3.6000.90.2
OBJECT IDENTIFIER    

zxr10ConfigManGlobalTraps 1.3.6.1.4.1.3902.3.6000.90.3
OBJECT IDENTIFIER    

zxr10ConfigManConformance 1.3.6.1.4.1.3902.3.6000.90.4
OBJECT IDENTIFIER    

zxr10cmRunningLastChanged 1.3.6.1.4.1.3902.3.6000.90.1.1
The value of sysUpTime when the running configuration was last changed. If the value of zxr10cmRunningLastChanged is greater than zxr10cmRunningLastSaved, the configuration has been changed but not saved.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10cmRunningLastSavedTxt 1.3.6.1.4.1.3902.3.6000.90.1.2
The value of sysUpTime when the running configuration was last saved (written) by TXT. If the value of zxr10cmRunningLastChanged is greater than zxr10cmRunningLastSaved, the configuration has been changed but not saved.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10cmRunningLastSavedZdb 1.3.6.1.4.1.3902.3.6000.90.1.3
The value of sysUpTime when the running configuration was last saved (written) by ZDB. If the value of zxr10cmRunningLastChanged is greater than zxr10cmRunningLastSaved, the configuration has been changed but not saved.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10cmRunLstChngedTmnlIpv4Addr 1.3.6.1.4.1.3902.3.6000.90.1.4
The ip addr (ipv4) of the terminal which changed the configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

zxr10cmRunLstChngedTmnlIpv6Addr 1.3.6.1.4.1.3902.3.6000.90.1.5
The ip addr (ipv6) of the terminal which changed the configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Ipv6Address  

zxr10cmRunLstChngedTmnlIpAddrTp 1.3.6.1.4.1.3902.3.6000.90.1.6
The ip addr type of the terminal which changed the configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

zxr10cmRunLstChngedTmnlTp 1.3.6.1.4.1.3902.3.6000.90.1.7
The type of the terminal which changed the configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER app(1), cli(2), snmp(3), web(4), xml(5), qx(6), cwmp(7), mimload(8), txtload(9), appreg(10)  

zxr10ConfigGlobalObjects 1.3.6.1.4.1.3902.3.6000.90.1.8
OBJECT IDENTIFIER    

zxr10ConfigurationTrapSwtich 1.3.6.1.4.1.3902.3.6000.90.1.8.1
The state which indicates whether the trap can be sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

zxr10cmRunningConfigChanged 1.3.6.1.4.1.3902.3.6000.90.3.1
This notification indicates that the running configuration of the managed system has changed.
Status: current Access: read-write
NOTIFICATION-TYPE