ZTE-AN-VLAN-MIB

File: ZTE-AN-VLAN-MIB.mib (52100 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ZTE-AN-SMI ZTE-AN-TC-MIB IF-MIB
ZTE-AN-IF-MIB

Imported symbols

MODULE-IDENTITY MODULE-COMPLIANCE OBJECT-GROUP
OBJECT-TYPE Integer32 RowStatus
DisplayString TruthValue zxAnBridge
VlanId ifIndex zxAnSubIfIndex
ZxAnSubIfIndex ZxAnPortList

Defined Types

ZxAnVlanEntry  
SEQUENCE    
  zxAnVid VlanId
  zxAnVlanName DisplayString
  zxAnVlanDesc DisplayString
  zxAnVlanRowStatus RowStatus

ZxAnVlanIfConfEntry  
SEQUENCE    
  zxAnVlanIfConfMode INTEGER
  zxAnVlanIfConfTlsEnable INTEGER
  zxAnVlanIfConfTlsSVid Integer32
  zxAnVlanIfConfDefaultVid Integer32
  zxAnVlanIfConfDefaultCVid Integer32
  zxAnVlanIfConfUntaggedVlanList DisplayString
  zxAnVlanIfConfTaggedVlanList DisplayString
  zxAnVlanIfConfTpid Integer32
  zxAnVlanIfIngressFilterEnable INTEGER
  zxAnVlanIfAcceptableFrameTypes INTEGER
  zxAnVlanIfConfTpidEnable INTEGER

ZxAnVlanIfConfVlanEntry  
SEQUENCE    
  zxAnVlanIfConfVlanTagVlanList OCTET STRING
  zxAnVlanIfConfVlanUntagVlanList OCTET STRING

ZxAnVlanExtPortListIIEntry  
SEQUENCE    
  zxAnVlanExtPortListIIRack Integer32
  zxAnVlanExtPortListIIShelf Integer32
  zxAnVlanExtPortListIISlot Integer32
  zxAnVlanExtPortListIIPort Integer32
  zxAnVlanExtPortListIISegment Integer32
  zxAnVlanExtPortUntagPortListII ZxAnPortList
  zxAnVlanExtPortTagPortListII ZxAnPortList

ZxAnVlanIfExtTransEntry  
SEQUENCE    
  zxAnVlanIfExtTransIngressVid VlanId
  zxAnVlanIfExtTransIngressCVid Integer32
  zxAnVlanIfExtTransVid VlanId
  zxAnVlanIfExtTransCVid Integer32
  zxAnVlanIfExtTransCos Integer32
  zxAnVlanIfExtTransCtagCos Integer32
  zxAnVlanIfExtTransRowStatus RowStatus

ZxAnVlanBasedFwdEntry  
SEQUENCE    
  zxAnVlanBasedFwdSVid VlanId
  zxAnVlanBasedFwdCVid Integer32
  zxAnVlanBasedFwdIfIndex Integer32
  zxAnVlanBasedFwdSubIfIndex ZxAnSubIfIndex
  zxAnVlanBasedFwdOtherIfIndex Integer32
  zxAnVlanBasedFwdOtherSubIfIndex ZxAnSubIfIndex
  zxAnVlanBasedFwdRowStatus RowStatus

ZxAnVlanBasedFwdConfEntry  
SEQUENCE    
  zxAnVlanBasedFwdConfMode INTEGER

ZxAnVlanTpidConfEntry  
SEQUENCE    
  zxAnVlanTpidConfTpid Integer32
  zxAnVlanTpidConfRowStatus RowStatus

ZxAnVlanForwardingCtrlEntry  
SEQUENCE    
  zxAnVlanMcastForwardingCtrl INTEGER

ZxAnVlanProtocolFilterConfEntry  
SEQUENCE    
  zxAnVlanProtoFilterConfEthType INTEGER
  zxAnVlanProtoFilterConfRowStatus RowStatus

ZxAnVlanTpidFilterConfEntry  
SEQUENCE    
  zxAnVlanTpidFilterConfIfType INTEGER
  zxAnVlanTpidFilterConfStagTpid DisplayString
  zxAnVlanTpidFilterConfRowStatus RowStatus

ZxAnVlanIfTpidFilterConfEntry  
SEQUENCE    
  zxAnVlanIfTpidFilterStagTpid DisplayString
  zxAnVlanIfTpidFilterRowStatus RowStatus

ZxAnVlanCopyCosToInnerEntry  
SEQUENCE    
  zxAnVlanCopyCosToInnerDirection INTEGER
  zxAnVlanCopyCosToInnerMode INTEGER
  zxAnVlanCopyCosToInnerRowStatus RowStatus

ZxAnVlanCopyCosToOuterEntry  
SEQUENCE    
  zxAnVlanCopyCosToOuterDirection INTEGER
  zxAnVlanCopyCosToOuterMode INTEGER
  zxAnVlanCopyCosToOuterRowStatus RowStatus

Defined Values

zxAnVlanMib 1.3.6.1.4.1.3902.1082.40.50
VLAN MIB definition.
MODULE-IDENTITY    

zxAnVlanGlobalObjects 1.3.6.1.4.1.3902.1082.40.50.1
OBJECT IDENTIFIER    

zxAnVlanObjects 1.3.6.1.4.1.3902.1082.40.50.2
OBJECT IDENTIFIER    

zxAnVlanBaseObjects 1.3.6.1.4.1.3902.1082.40.50.2.1
OBJECT IDENTIFIER    

zxAnVlanTransObjects 1.3.6.1.4.1.3902.1082.40.50.2.3
OBJECT IDENTIFIER    

zxAnVlanBasedForwardingObjects 1.3.6.1.4.1.3902.1082.40.50.2.6
OBJECT IDENTIFIER    

zxAnVlanTpidObjects 1.3.6.1.4.1.3902.1082.40.50.2.9
OBJECT IDENTIFIER    

zxAnVlanForwardingCtrlObjects 1.3.6.1.4.1.3902.1082.40.50.2.10
OBJECT IDENTIFIER    

zxAnVlanProtocolFilterObjects 1.3.6.1.4.1.3902.1082.40.50.2.11
OBJECT IDENTIFIER    

zxAnVlanTpidFilterObjects 1.3.6.1.4.1.3902.1082.40.50.2.12
OBJECT IDENTIFIER    

zxAnVlanModifyCosObjects 1.3.6.1.4.1.3902.1082.40.50.2.13
OBJECT IDENTIFIER    

zxAnVlanNum 1.3.6.1.4.1.3902.1082.40.50.1.1
The current number of VLANs that are configured in this device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnVlanGlobalCtagTpid 1.3.6.1.4.1.3902.1082.40.50.1.2
This object indicates global inner VLAN TPID, it only can be configured with value '0x8100'. For C600 series, this object indicates up to four global inner VLAN TPIDs, separated by commas, e.g., '0x8100', '0x8100,0x9100'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxAnVlanGlobalTpid 1.3.6.1.4.1.3902.1082.40.50.1.3
This object indicates up to four global outer VLAN TPIDs, separated by commas, e.g., '0x8100', '0x8100,0x9100'. The default value is '0x8100,0x88a8' for C600 series.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxAnVlanCapabilities 1.3.6.1.4.1.3902.1082.40.50.1.100
The VLAN capabilities. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means supporting zxAnVlanExtPortListTable and not supporting zxAnVlanPortListTable. bit 1: value 1 means changing zxAnVlanBasedFwdUplinkPort to zxAnVlanBasedFwdOtherIfIndex, supporting zxAnVlanBasedFwdOtherSubIfIndex and modifying MAX-ACCESS of zxAnVlanBasedFwdIfIndex and zxAnVlanBasedFwdSubIfIndex from read-only to read-create. bit 2: value 1 means supporting zxAnVlanIfConfVlanTable and not supporting zxAnVlanIfConfVlanCmdTable, zxAnVlanIfConfUntaggedVlanList, zxAnVlanIfConfTaggedVlanList in zxAnVlanIfConfTable. bit 3: value 1 means supporting zxAnVlanExtPortListIITable and not supporting zxAnVlanExtPortListTable, zxAnVlanPortListTable. bit 4: value 1 means supporting zxAnMcastVlanGlobalTransTable, zxAnMcastVlanIfTransTable in ZTE-AN-MULTICAST-BASE-MIB.mib, and not supporting zxAnMVlanGlobalTransTable, zxAnMVlanIfTransTable in this file. bit 5: value 1 means not supporting zxAnVlanIfAcceptableFrameTypes in zxAnVlanIfConfTable. bit 6: value 1 means supporting zxAnVlanIfExtTransTable and not supporting zxAnVlanIfTransTable. bit 7: value 1 means supporting zxAnVlanIfConfDefaultVid not configured. bit 8: value 1 means supporting zxAnVlanIfExtTransCos and zxAnVlanIfExtTransCtagCos in zxAnVlanIfExtTransTable. NOTE: No recommended to display it in NMS.
Status: current Access: read-only
OBJECT-TYPE    
  BITS supportVlanExtPortListTable(0), supportVlanBasedFwdWithSpecPorts(1), supportVlanIfConfVlanTable(2), supportVlanExtPortListIITable(3), supportMvlanTransInNewMibFile(4), notSupportAcceptableFrameTypes(5), supportVlanIfExtTransTable(6), supportDefaultVidNotConfigured(7), supportCosInVlanIfExtTransTable(8)  

zxAnVlanTable 1.3.6.1.4.1.3902.1082.40.50.2.1.2
A table containing VLAN information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanEntry

zxAnVlanEntry 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1
Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded. It is forbidden to destroy zxAnVlanEntry whose zxAnVid exists in zxAnVlanVoipConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanEntry  

zxAnVid 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.1
The VlanId to which this entry's filtering information applies.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnVlanName 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.2
DURABLE: { 'Default' } An administratively assigned string, which may be used to identify the VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnVlanDesc 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.3
The description of VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnVlanRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.1.2.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanIfConfTable 1.3.6.1.4.1.3902.1082.40.50.2.1.4
A table containing VLAN Port information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanIfConfEntry

zxAnVlanIfConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1
Filtering information configured into the bridge by management, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address, are allowed to be forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanIfConfEntry  

zxAnVlanIfConfMode 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.1
The access mode of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER access(1), trunk(2), hybrid(3)  

zxAnVlanIfConfTlsEnable 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.2
The Transparent LAN Service enable or disable. When port in access mode, TLS always disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnVlanIfConfTlsSVid 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.3
The TLS vlan id of the port. Only TLS enable, TLS Vlan id can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanIfConfDefaultVid 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.4
The default VLAN of the port. '0' indicates not configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanIfConfDefaultCVid 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.5
The default CVLAN of the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanIfConfUntaggedVlanList 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.6
The Untagged vlan sequence to a Port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxAnVlanIfConfTaggedVlanList 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.7
The Tagged vlan sequence to a Port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxAnVlanIfConfTpid 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.8
The outer VLAN TPID of this port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnVlanIfIngressFilterEnable 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.9
When this is enable(1) the port will reject incoming frames for VLAN only if the port belongs to that vlan. When this is disable(2), the port will accept all incoming frames,regardless of the the port's vlan membership.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnVlanIfAcceptableFrameTypes 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.10
When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the DefaultVid for this port. When admitOnlyVlanUntagged(3), only untagged frames or Priority-Tagged frames received on this port will be accepted for this port. When admitOnlyVlanSingleTagged(4), only single tagged frames received on this port will be accepted for this port. When admitOnlyVlanMaxDoubleTagged(5), the device will accept untagged frames or Priority-tagged frames or single tagged frames or double tagged frames received on this port. When admitOnlyVlanMaxSingleTagged(6), the device will accept untagged frames or Priority-tagged frames or single tagged frames received on this port. When admitOnlyVlanDoubleTagged(7), only double tagged frames received on this port will be accepted for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER admitAll(1), admitOnlyVlanTagged(2), admitOnlyVlanUntagged(3), admitOnlyVlanSingleTagged(4), admitOnlyVlanMaxDoubleTagged(5), admitOnlyVlanMaxSingleTagged(6), admitOnlyVlanDoubleTagged(7)  

zxAnVlanIfConfTpidEnable 1.3.6.1.4.1.3902.1082.40.50.2.1.4.1.11
Enable or disable zxAnVlanIfConfTpid. enabled(1) -- Apply the out VLAN TPID with zxAnVlanIfConfTpid. disabled(2) -- Apply the out VLAN TPID with zxAnVlanConfTpid in the zxAnVlanConfTpidTable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnVlanIfConfVlanTable 1.3.6.1.4.1.3902.1082.40.50.2.1.9
VLAN configuration table. This table is only used for getting VLAN information (network-side SVLAN of service port function) when operating on EPON/GPON ports. This table is used for setting and getting VLAN information when operating on uplink ports. This table is used for setting and getting VLAN information when operating on DSL ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanIfConfVlanEntry

zxAnVlanIfConfVlanEntry 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1
VLAN configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanIfConfVlanEntry  

zxAnVlanIfConfVlanTagVlanList 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.1
Tagged VLAN list in the port. A bit value of 1 indicates the associated VLAN is in the port.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(512)  

zxAnVlanIfConfVlanUntagVlanList 1.3.6.1.4.1.3902.1082.40.50.2.1.9.1.2
Untagged VLAN list in the port. A bit value of 1 indicates the associated VLAN is in the port.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(512)  

zxAnVlanExtPortListIITable 1.3.6.1.4.1.3902.1082.40.50.2.1.10
Port list based on VLAN table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanExtPortListIIEntry

zxAnVlanExtPortListIIEntry 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1
Port list based on VLAN entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanExtPortListIIEntry  

zxAnVlanExtPortListIIRack 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.1
Rack index for port list on the VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnVlanExtPortListIIShelf 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.2
Shelf index for port list on the VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnVlanExtPortListIISlot 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.3
Slot index for port list on the VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnVlanExtPortListIIPort 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.4
Port index for port list on the VLAN. Value 0 means non-PON port, other values means EPON/GPON port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnVlanExtPortListIISegment 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.5
The segment of ONU that contains the port list. The segment will range from 1 to 16 when the port is EPON/GPON port. The segment will be always 1 when the port is non-PON port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

zxAnVlanExtPortUntagPortListII 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.6
Untagged ports of the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  ZxAnPortList  

zxAnVlanExtPortTagPortListII 1.3.6.1.4.1.3902.1082.40.50.2.1.10.1.7
Tagged ports of the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  ZxAnPortList  

zxAnVlanIfExtTransTable 1.3.6.1.4.1.3902.1082.40.50.2.3.5
VLAN translation extension table. This table is an extension of the table zxAnVlanIfTransTable. This table includes VLAN translation information for single tagged packets, and double tagged packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanIfExtTransEntry

zxAnVlanIfExtTransEntry 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1
VLAN Translation extension entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanIfExtTransEntry  

zxAnVlanIfExtTransIngressVid 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.1
Ingress VID for VLAN translation.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnVlanIfExtTransIngressCVid 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.2
Ingress C-VID for VLAN translation. '0' means the packet to be translated is single tagged packet.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanIfExtTransVid 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.3
VID after VLAN translation.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

zxAnVlanIfExtTransCVid 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.4
C-VID after VLAN translation. '0' means the packet after VLAN translation is single tagged packet.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanIfExtTransCos 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.5
VLAN CoS after VLAN translation. Value '0xFF' indicates not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

zxAnVlanIfExtTransCtagCos 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.6
CVLAN CoS after VLAN translation. Value '0xFF' indicates not configured.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

zxAnVlanIfExtTransRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.3.5.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnExampleFunc1Xxx1Entry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanBasedFwdTable 1.3.6.1.4.1.3902.1082.40.50.2.6.3
This table includes VLAN based forward rule configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanBasedFwdEntry

zxAnVlanBasedFwdEntry 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1
An entry in zxAnVlanBasedFwdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanBasedFwdEntry  

zxAnVlanBasedFwdSVid 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.1
SVlan ,it shouled be included in the zxAnBasedFwdVlanTable
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnVlanBasedFwdCVid 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.2
cvlan
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

zxAnVlanBasedFwdIfIndex 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.3
An index for port.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxAnVlanBasedFwdSubIfIndex 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.4
An index for port.
Status: current Access: read-create
OBJECT-TYPE    
  ZxAnSubIfIndex  

zxAnVlanBasedFwdOtherIfIndex 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.5
An index of the other port.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxAnVlanBasedFwdOtherSubIfIndex 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.6
An index of the other port.
Status: current Access: read-create
OBJECT-TYPE    
  ZxAnSubIfIndex  

zxAnVlanBasedFwdRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.6.3.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables usage rules in zxAnVlanBasedFwdEntry description. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanBasedFwdConfTable 1.3.6.1.4.1.3902.1082.40.50.2.6.4
This table includes VLAN based forward configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanBasedFwdConfEntry

zxAnVlanBasedFwdConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.6.4.1
An entry in zxAnVlanBasedFwdConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanBasedFwdConfEntry  

zxAnVlanBasedFwdConfMode 1.3.6.1.4.1.3902.1082.40.50.2.6.4.1.1
VLAN based forwarding mode. vlan1To1(1) - Forwarding the packets with the S-VID configured in the zxAnVlanBasedFwdTable. When user-side interface in the zxAnVlanBasedFwdTable is deleted, the packet with the S-VID will be discarded. vlanAndMac(2) - Forwarding the packets with VLAN ID and MAC address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vlan1To1(1), vlanAndMac(2)  

zxAnVlanTpidConfTable 1.3.6.1.4.1.3902.1082.40.50.2.9.2
A table containing VLAN TPID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanTpidConfEntry

zxAnVlanTpidConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1
Entry for zxAnVlanTpidConfTable. The multi-variables binding rule should be complied with when a manager creates a VLAN TPID. According to this rule, all the related mib variables must be included in one SNMP set operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanTpidConfEntry  

zxAnVlanTpidConfTpid 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.1
This object indicates the outer VLAN TPID of this VLAN. Value define uses hex.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxAnVlanTpidConfRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.9.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanTpidConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanForwardingCtrlTable 1.3.6.1.4.1.3902.1082.40.50.2.10.2
A table containing VLAN forwarding control information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanForwardingCtrlEntry

zxAnVlanForwardingCtrlEntry 1.3.6.1.4.1.3902.1082.40.50.2.10.2.1
Entry for zxAnVlanForwardingCtrlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanForwardingCtrlEntry  

zxAnVlanMcastForwardingCtrl 1.3.6.1.4.1.3902.1082.40.50.2.10.2.1.1
The multicast packet forwarding control.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER floodUnknown(1), dropUnknown(2), floodAll(3)  

zxAnVlanProtocolFilterConfTable 1.3.6.1.4.1.3902.1082.40.50.2.11.2
A table containing VLAN protocol filter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanProtocolFilterConfEntry

zxAnVlanProtocolFilterConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1
Entry for zxAnVlanProtocolFilterConfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanProtocolFilterConfEntry  

zxAnVlanProtoFilterConfEthType 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.1
EtherType. pppoe(1) - EtherType is PPPoE. ipoe(2) - EtherType is IPoE.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER pppoe(1), ipoe(2)  

zxAnVlanProtoFilterConfRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.11.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanProtocolFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanTpidFilterConfTable 1.3.6.1.4.1.3902.1082.40.50.2.12.2
A table containing TPIDs to filter the packets. Packets will be discarded when the TPID is mismatched.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanTpidFilterConfEntry

zxAnVlanTpidFilterConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1
A zxAnVlanTpidFilterConfTable entry. When the S-tag TPID filtering is configured in the zxAnVlanIfTpidFilterConfTable, the interface will filter the packets with zxAnVlanIfTpidFilterStagTpid. When the S-tag TPID filtering is not configured in the zxAnVlanIfTpidFilterConfTable, the interface will filter the packets with zxAnVlanTpidFilterConfStagTpid. When the S-tag TPID filtering is not configured in the zxAnVlanIfTpidFilterConfTable and zxAnVlanTpidFilterConfTable, it means the S-tag TPID filtering is disabled.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanTpidFilterConfEntry  

zxAnVlanTpidFilterConfIfType 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.1
Interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER pon(1), uplink(2), ptp(3)  

zxAnVlanTpidFilterConfStagTpid 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.2
Outer VLAN TPIDs. This object indicates up to four outer VLAN TPIDs of the interface, separated by commas, e.g., '0x8100', '0x8100,0x9100'.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

zxAnVlanTpidFilterConfRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.12.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanTpidFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanIfTpidFilterConfTable 1.3.6.1.4.1.3902.1082.40.50.2.12.3
A table containing TPIDs of the interface to filter the packets. Packets will be discarded when the TPID is mismatched.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanIfTpidFilterConfEntry

zxAnVlanIfTpidFilterConfEntry 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1
A zxAnVlanIfTpidFilterConfTable entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanIfTpidFilterConfEntry  

zxAnVlanIfTpidFilterStagTpid 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.1
Outer VLAN TPIDs. This object indicates up to four outer VLAN TPIDs of the interface, separated by commas, e.g., '0x8100', '0x8100,0x9100'.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

zxAnVlanIfTpidFilterRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.12.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanIfTpidFilterConfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanCopyCosToInnerTable 1.3.6.1.4.1.3902.1082.40.50.2.13.2
A table containing modifying inner CoS information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanCopyCosToInnerEntry

zxAnVlanCopyCosToInnerEntry 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1
Entry for zxAnVlanCopyCosToInnerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanCopyCosToInnerEntry  

zxAnVlanCopyCosToInnerDirection 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.1
Direction.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ingress(1)  

zxAnVlanCopyCosToInnerMode 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.2
networkSide(1) - The rule is used in network side.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER networkSide(1)  

zxAnVlanCopyCosToInnerRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.13.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanCopyCosToInnerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVlanCopyCosToOuterTable 1.3.6.1.4.1.3902.1082.40.50.2.13.3
A table containing modifying outer CoS information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVlanCopyCosToOuterEntry

zxAnVlanCopyCosToOuterEntry 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1
Entry for zxAnVlanCopyCosToOuterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVlanCopyCosToOuterEntry  

zxAnVlanCopyCosToOuterDirection 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.1
Direction.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ingress(1)  

zxAnVlanCopyCosToOuterMode 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.2
networkSide(1) - The rule is used in network side.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER networkSide(1)  

zxAnVlanCopyCosToOuterRowStatus 1.3.6.1.4.1.3902.1082.40.50.2.13.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnVlanCopyCosToInnerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns 1.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus