ZTE-AN-SOFTWARE-MIB

File: ZTE-AN-SOFTWARE-MIB.mib (82339 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI ZTE-AN-SMI
SNMPv2-CONF

Imported symbols

DisplayString DateAndTime TruthValue
MODULE-IDENTITY OBJECT-TYPE Integer32
NOTIFICATION-TYPE zxAnSystem MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP

Defined Types

ZxAnSwCardRunningVerEntry  
SEQUENCE    
  zxAnSwCardRack Integer32
  zxAnSwCardShelf Integer32
  zxAnSwCardSlot Integer32
  zxAnSwCardFileName DisplayString
  zxAnSwCardFileType DisplayString
  zxAnSwCardVersion DisplayString
  zxAnSwCardFileLen Integer32
  zxAnSwCardBuildTime DateAndTime
  zxAnSwCardBootwareFileName DisplayString
  zxAnSwCardBootwareFileType DisplayString
  zxAnSwCardBootwareVersion DisplayString
  zxAnSwCardBootwareFileLen Integer32
  zxAnSwCardBootwareBuildTime DateAndTime
  zxAnSwCardFirmware1FileName DisplayString
  zxAnSwCardFirmware1FileType DisplayString
  zxAnSwCardFirmware1Version DisplayString
  zxAnSwCardFirmware1FileLen Integer32
  zxAnSwCardFirmware1BuildTime DateAndTime
  zxAnSwCardFirmware2FileName DisplayString
  zxAnSwCardFirmware2FileType DisplayString
  zxAnSwCardFirmware2Version DisplayString
  zxAnSwCardFirmware2FileLen Integer32
  zxAnSwCardFirmware2BuildTime DateAndTime
  zxAnSwCardFirmware3FileName DisplayString
  zxAnSwCardFirmware3FileType DisplayString
  zxAnSwCardFirmware3Version DisplayString
  zxAnSwCardFirmware3FileLen Integer32
  zxAnSwCardFirmware3BuildTime DateAndTime

ZxAnSwSubcardRunningVerEntry  
SEQUENCE    
  zxAnSwSubcardSlot Integer32
  zxAnSwSubcardFileName DisplayString
  zxAnSwSubcardFileType DisplayString
  zxAnSwSubcardVersion DisplayString
  zxAnSwSubcardFileLen Integer32
  zxAnSwSubcardBuildTime DateAndTime
  zxAnSwSubcardBootwareFileName DisplayString
  zxAnSwSubcardBootwareFileType DisplayString
  zxAnSwSubcardBootwareVersion DisplayString
  zxAnSwSubcardBootwareFileLen Integer32
  zxAnSwSubcardBootwareBuildTime DateAndTime
  zxAnSwSubcardFirmwareFileName DisplayString
  zxAnSwSubcardFirmwareFileType DisplayString
  zxAnSwSubcardFirmwareVersion DisplayString
  zxAnSwSubcardFirmwareFileLen Integer32
  zxAnSwSubcardFirmwareBuildTime DateAndTime

ZxAnSwImageEntry  
SEQUENCE    
  zxAnSwImageFileName DisplayString
  zxAnSwImageFileType DisplayString
  zxAnSwImageVersion DisplayString
  zxAnSwImageFileLen Integer32
  zxAnSwImageBuildTime DateAndTime
  zxAnSwImageActiveStatus INTEGER
  zxAnSwImageDownloadTime DateAndTime

ZxAnSwSetEntry  
SEQUENCE    
  zxAnSwSetName DisplayString
  zxAnSwSetFileName DisplayString
  zxAnSwSetFileType DisplayString
  zxAnSwSetFileVersion DisplayString
  zxAnSwSetFileLen Integer32
  zxAnSwSetFileBuildTime DateAndTime
  zxAnSwSetFileWriteStatus INTEGER

ZxAnSwManualUpdateStatusEntry  
SEQUENCE    
  zxAnSwManualUpdateSoftwareType INTEGER
  zxAnSwManualUpdateStatus INTEGER
  zxAnSwManualFailedReason INTEGER

ZxAnSwSubcardMUpdateStatusEntry  
SEQUENCE    
  zxAnSwSubcardMUpdateSoftwareType INTEGER
  zxAnSwSubcardMUpdateStatus INTEGER
  zxAnSwSubcardMUpdateFailedReason INTEGER

ZxAnSwSavedPatchEntry  
SEQUENCE    
  zxAnSwPatchRack Integer32
  zxAnSwPatchShelf Integer32
  zxAnSwPatchSlot Integer32
  zxAnSwPatchName DisplayString
  zxAnSwPatchOwnerSwVersion DisplayString
  zxAnSwPatchVersion DisplayString
  zxAnSwPatchSize Integer32
  zxAnSwPatchBuildTime DateAndTime
  zxAnSwPatchConfActiveStatus INTEGER
  zxAnSwPatchDescription DisplayString

ZxAnSwCardPatchRunStatusEntry  
SEQUENCE    
  zxAnSwCardPatchName DisplayString
  zxAnSwCardPatchOwnerSwVersion DisplayString
  zxAnSwCardPatchVersion DisplayString
  zxAnSwCardPatchSize Integer32
  zxAnSwCardPatchBuildTime DateAndTime
  zxAnSwCardPatchActivatedTime DateAndTime
  zxAnSwCardPatchDescription DisplayString
  zxAnSwCardPatchRunningStatus INTEGER

ZxAnSwSubcardRunningPatchEntry  
SEQUENCE    
  zxAnSwPatchSubcardSlot Integer32
  zxAnSwSubcardPatchName DisplayString
  zxAnSwSubcardPatchOwnerSwVersion DisplayString
  zxAnSwSubcardPatchVersion DisplayString
  zxAnSwSubcardPatchSize Integer32
  zxAnSwSubcardPatchBuildTime DateAndTime
  zxAnSwSubcardPatchActivatedTime DateAndTime
  zxAnSwSubcardPatchDescription DisplayString

ZxAnSwSavedPatchPackageEntry  
SEQUENCE    
  zxAnSwPatchPkgName DisplayString
  zxAnSwPatchPkgVersion DisplayString
  zxAnSwPatchPkgSize Integer32
  zxAnSwPatchPkgBuildTime DateAndTime
  zxAnSwPatchPkgDescription DisplayString
  zxAnSwPatchPkgConfActiveStatus INTEGER
  zxAnSwPatchPkgActualActiveStatus INTEGER

ZxAnSwSavedPatchPackageFileEntry  
SEQUENCE    
  zxAnSwPatchPkgFileName DisplayString
  zxAnSwPatchPkgFileBuildTime DateAndTime
  zxAnSwPatchPkgFileNeedResetCard INTEGER
  zxAnSwPatchPkgFileActiveStatus INTEGER

Defined Values

zxAnSoftwareMib 1.3.6.1.4.1.3902.1082.20.30
This MIB defines zte Access Node software management.
MODULE-IDENTITY    

zxAnSwObjects 1.3.6.1.4.1.3902.1082.20.30.2
OBJECT IDENTIFIER    

zxAnSwNotifications 1.3.6.1.4.1.3902.1082.20.30.3
OBJECT IDENTIFIER    

zxAnCardSwObjects 1.3.6.1.4.1.3902.1082.20.30.2.2
OBJECT IDENTIFIER    

zxAnSwUpdateObjects 1.3.6.1.4.1.3902.1082.20.30.2.3
OBJECT IDENTIFIER    

zxAnSwSwapObjects 1.3.6.1.4.1.3902.1082.20.30.2.4
OBJECT IDENTIFIER    

zxAnCardPatchObjects 1.3.6.1.4.1.3902.1082.20.30.2.5
OBJECT IDENTIFIER    

zxAnSwManualUpdateObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.2
OBJECT IDENTIFIER    

zxAnSwManualUpdateGlobalObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1
OBJECT IDENTIFIER    

zxAnSwAutoUpdateObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.3
OBJECT IDENTIFIER    

zxAnSwAutoUpdateGlobalObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1
OBJECT IDENTIFIER    

zxAnSwAutoUpdateChkObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1
OBJECT IDENTIFIER    

zxAnSwAutoUpdateOperObjects 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2
OBJECT IDENTIFIER    

zxAnSwSwapGlobalObjects 1.3.6.1.4.1.3902.1082.20.30.2.4.1
OBJECT IDENTIFIER    

zxAnSwAutoUpdateTraps 1.3.6.1.4.1.3902.1082.20.30.3.1
OBJECT IDENTIFIER    

zxAnSwCardRunningVerTable 1.3.6.1.4.1.3902.1082.20.30.2.2.2
This table includes the card version information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwCardRunningVerEntry

zxAnSwCardRunningVerEntry 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1
An entry in zxAnCardTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwCardRunningVerEntry  

zxAnSwCardRack 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.1
The rack number
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwCardShelf 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.2
The shelf number
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwCardSlot 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.3
The slot number
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwCardFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.5
The version file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.6
The version file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.7
The version tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.8
The version file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.9
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardBootwareFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.10
The bootrom file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardBootwareFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.11
The bootrom file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardBootwareVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.12
The bootrom tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardBootwareFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.13
The bootrom file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardBootwareBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.14
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardFirmware1FileName 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.15
The firmware file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware1FileType 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.16
The firmware file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware1Version 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.17
The firmware tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware1FileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.18
The firmware file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardFirmware1BuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.19
The time version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardFirmware2FileName 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.20
The firmware file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware2FileType 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.21
The firmware file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware2Version 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.22
The firmware tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware2FileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.23
The firmware file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardFirmware2BuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.24
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardFirmware3FileName 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.25
The firmware file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware3FileType 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.26
The firmware file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware3Version 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.27
The firmware tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardFirmware3FileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.28
The firmware file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardFirmware3BuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.2.1.29
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSubcardRunningVerTable 1.3.6.1.4.1.3902.1082.20.30.2.2.3
This table includes the sub card version information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSubcardRunningVerEntry

zxAnSwSubcardRunningVerEntry 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1
An entry in zxAnSwSubcardRunningVerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSubcardRunningVerEntry  

zxAnSwSubcardSlot 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.1
The slot number of the subcard
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.3
The version file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.4
The version file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.5
The version tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.6
The version file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.7
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSubcardBootwareFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.8
The bootrom file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardBootwareFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.9
The bootrom file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardBootwareVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.10
The bootrom tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardBootwareFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.11
The bootrom file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardBootwareBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.12
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSubcardFirmwareFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.13
The firmware file name of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardFirmwareFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.14
The firmware file type of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardFirmwareVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.15
The firmware tag of the card.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardFirmwareFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.16
The firmware file length of the card.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardFirmwareBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.3.1.17
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwImageTable 1.3.6.1.4.1.3902.1082.20.30.2.2.4
This table includes the saved version information in version area MP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwImageEntry

zxAnSwImageEntry 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1
An entry in zxAnSwImageTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwImageEntry  

zxAnSwImageFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwImageFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.2
The version file type on the saved area.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwImageVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.3
The version tag on the saved area.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwImageFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.4
The version file length on the saved area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwImageBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.5
The time of version build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwImageActiveStatus 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.6
The status of saved MP version on the saved area. active(1): active MP version. inactive(2): inactive MP version. none(3): NP version, don't have active attribute.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), none(3)  

zxAnSwImageDownloadTime 1.3.6.1.4.1.3902.1082.20.30.2.2.4.1.7
The downloading time of the version file.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSetTable 1.3.6.1.4.1.3902.1082.20.30.2.2.5
The software set file information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSetEntry

zxAnSwSetEntry 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1
An entry in zxAnSwSetTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSetEntry  

zxAnSwSetName 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.1
The software set name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwSetFileName 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.2
The software set file name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwSetFileType 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.3
The type of the software set file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwSetFileVersion 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.4
The version of the software set file.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwSetFileLen 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.5
The length of the software set file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwSetFileBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.6
The building time of the software set file.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSetFileWriteStatus 1.3.6.1.4.1.3902.1082.20.30.2.2.5.1.7
The written status of the software set file in the version area.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), failed(2), sameVersion(3)  

zxAnSwManualUpdateRack 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.1
The rack number. The multi-variables binding rule should be complied with when a manager manual updates software. According to this rule,all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To manual update software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType optional : none To manual update subcard software, the mandatory and optional variables are as follows: mandatoty: zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType, zxAnSwManualUpdateSubcardList optional : none
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnSwManualUpdateShelf 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.2
The shelf number. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnSwManualUpdateSlotList 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.3
The slot number. updating version file from MP to NP. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwManualUpdateSwType 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.4
The software type is special to update. This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. bootware(1): update bootware.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bootware(1)  

zxAnSwManualUpdateSubcardList 1.3.6.1.4.1.3902.1082.20.30.2.3.2.1.5
The subcard number. updating version file from MP to subcard. They can be updated in batch. For example: '1,2,3' This variable must comply with the multi-variables binding rule described in zxAnSwManualUpdateRack. If zxAnSwManualUpdateSlotList is '1,2' and zxAnSwManualUpdateSubcardList is '3,4', the actual operation object like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwManualUpdateStatusTable 1.3.6.1.4.1.3902.1082.20.30.2.3.2.5
This table includes the version updating status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwManualUpdateStatusEntry

zxAnSwManualUpdateStatusEntry 1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1
An entry in zxAnSwManualUpdateStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwManualUpdateStatusEntry  

zxAnSwManualUpdateSoftwareType 1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.1
The software type when updating version.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER bootware(1)  

zxAnSwManualUpdateStatus 1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.2
The version status when updating version. negotiating(1):negotiating not starting downloading(2):updating from MP failed(3): update failed success(4): update successly sameVersion(5):not need update
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER negotiating(1), downloading(2), failed(3), success(4), sameversion(5)  

zxAnSwManualFailedReason 1.3.6.1.4.1.3902.1082.20.30.2.3.2.5.1.3
The reason when updating version failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), noSupportCardHwVersion(2), mismatchCardHwVersion(3), mismatchCardConfData(4), noSwInNe(5), cardUpdateSwFailed(6)  

zxAnSwSubcardMUpdateStatusTable 1.3.6.1.4.1.3902.1082.20.30.2.3.2.6
This table includes the subcard software updating status information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSubcardMUpdateStatusEntry

zxAnSwSubcardMUpdateStatusEntry 1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1
An entry in zxAnSwSubcardMUpdateStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSubcardMUpdateStatusEntry  

zxAnSwSubcardMUpdateSoftwareType 1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.1
The software type when updating subcard software. bootware(1): update bootware.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER bootware(1)  

zxAnSwSubcardMUpdateStatus 1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.2
The updating status when updating subcard software. negotiating(1): negotiating not starting. downloading(2): updating from MP. failed(3): update failed. success(4): update successfully. sameVersion(5): not need to update.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER negotiating(1), downloading(2), failed(3), success(4), sameversion(5)  

zxAnSwSubcardMUpdateFailedReason 1.3.6.1.4.1.3902.1082.20.30.2.3.2.6.1.3
The reason when updating subcard software failed. noError(1): no error. noSupportCardHwVersion(2): control card doesn't support the current card hardware version. mismatchCardHwVersion(3): control card's configuration and the current card hardware version are mismatch. mismatchCardConfData(4): control card's configuration and the current card configuration data are mismatch. noSwInNe(5): software for this card doesn't exist in control card. cardUpdateSwFailed(6): the current card software update failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), noSupportCardHwVersion(2), mismatchCardHwVersion(3), mismatchCardConfData(4), noSwInNe(5), cardUpdateSwFailed(6)  

zxAnSwAutoUpdateChkEnable 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.1
Enable or disable the software periodic check function. The multi-variables binding rule should be complied with when a software periodic check. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To configure software periodic check(except disable software periodic check function), the mandatory and optional variables are as follows: mandatoty: zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, zxAnSwAutoUpdateChkInterval optional : none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnSwAutoUpdateChkStartTime 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.2
The start time of software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33). This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

zxAnSwAutoUpdateChkInterval 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.3
The interval of software periodic check. Value 0 means unconfigured. Unit is hour. This variable must comply with the multi-variables binding rule described in zxAnSwAutoUpdateChkEnable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8760  

zxAnSwAutoUpdateCurrChkStartTime 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.20
The start time of current software periodic check. For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwAutoUpdateChkDifferFiles 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.21
The different files name between NE and file server. File name is separated by ',', For example:xxx,xxx,xxx.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxAnSwAutoUpdateChkStatus 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.22
The status of software periodic check. notStarted(1): Automatic update check not start inProgress(2): Automatic update check in progress success(3): Automatic update check successful failed(4): Automatic update check failed
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), inProgress(2), success(3), failed(4)  

zxAnSwAutoUpdateChkFailedReason 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.1.23
The failed reason of software periodic check. noError(1): Automatic update check successful or not start fileServerUnconfigured(2): Automatic update file server is not configure fileServerConnectFailed(3): File server connect failed fileServerLoginFailed(4): File server configure is not correct fileServerPathError(5): File server configure path is not correct fileServerProtocolTypeError(6): File server configure protocol type is not correct deviceCheckFailed(7): NE flash error otherErrors(255): Error is not include above list
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), fileServerUnconfigured(2), fileServerConnectFailed(3), fileServerLoginFailed(4), fileServerPathError(5), fileServerProtocolTypeError(6), deviceCheckFailed(7), otherErrors(255)  

zxAnSwAutoUpdateAction 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.1
The automatic update action. It means to start the automatic update progress.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER start(1)  

zxAnSwAutoUpdateActiveEnable 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.2
Enable or disable the software active function. Active means to reset card except control card.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnSwAutoUpdateSwBackupEnable 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.3
Enable or disable the version file backup function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

zxAnSwAutoUpdateStatus 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.20
The status of automatic update. notStarted(1): Not start updateStarting(2): Update Start backingUpFile(3): Backup software before update versionFileAnalyzing(4): Software analyzing versionFileDownloading(5): Software downloading versionFileDownloadComplete(6):Software download completed masterSlaveSynchronizing(7): Synchronize software to slave board masterSlaveSyncComplete(8): Synchronize software completed versionFileLoading(9): Load software to card bootUpdating(10): Update bootrom bootUpdateComplete(11): Update bootrom completed updateSuccess(12): Update successful readyToReboot(13): Update had beed finished,ready to reboot sameVersion(14): Update is not need for same version updateFailed(255): Update failed
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), updateStarting(2), backingUpFile(3), versionFileAnalyzing(4), versionFileDownloading(5), versionFileDownloadComplete(6), masterSlaveSynchronizing(7), masterSlaveSyncComplete(8), versionFileLoading(9), bootUpdating(10), bootUpdateComplete(11), updateSuccess(12), readyToReboot(13), sameVersion(14), updateFailed(255)  

zxAnSwAutoUpdateCurrFileName 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.21
The name of current file which is updated.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwAutoUpdateCurrFileSize 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.22
The size of current file which is updated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwAutoUpdateCurrFileProgress 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.23
The updating progress of current file.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnSwAutoUpdateTotalFiles 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.24
Total count of files will be updated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwAutoUpdateSuccessFiles 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.25
Count of files which are updated successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwAutoUpdateFailedReason 1.3.6.1.4.1.3902.1082.20.30.2.3.3.1.2.26
The failed reason of automatic update. noError(1), Update is not start or successful backupDataError(2), Backup data failed backupLogError(3), Backup log failed backupConfigurationError(4), Backup configuration failed backupVersionFileError(5), Backup software failed backupOtherError(6), Backup file failed is not above list analyzingConfigurationError(7), Analyze configuration error analyzingVersionFileError(8), Analyze software error diskFull(9), NE disk is full downloadingVersionFileError(10),Download software failed updateVersionFileError(11), Update software failed updateBootError(12), Update bootrom failed masterSlaveSynchronizeError(13),Synchronize software to slave board failed updateConflict(14), Other update is executing unavailableServer(15), File server configure failed slaveCardNotInService(16), Slave board is not inservice fileNotExist(17), File not exist on server otherErrors(255) Other errors is not list above
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), backupDataError(2), backupLogError(3), backupConfigurationError(4), backupVersionFileError(5), backupOtherError(6), analyzingConfigurationError(7), analyzingVersionFileError(8), diskFull(9), downloadingVersionFileError(10), updateVersionFileError(11), updateBootError(12), masterSlaveSynchronizeError(13), updateConflict(14), unavailableServer(15), slaveCardNotInService(16), fileNotExist(17), otherErrors(255)  

zxAnSwSwapRack 1.3.6.1.4.1.3902.1082.20.30.2.4.1.1
The Rack No. is used for swap version . The multi-variables binding rule should be complied with when swap software. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To swap software, the mandatory and optional variables are as follows: mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot optional :none
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnSwSwapShelf 1.3.6.1.4.1.3902.1082.20.30.2.4.1.2
The Shelf number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnSwSwapSlot 1.3.6.1.4.1.3902.1082.20.30.2.4.1.3
The slot number is used for swap version. This variable must comply with the multi-variables binding rule described in zxAnSwSwapRack.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnSwSavedPatchTable 1.3.6.1.4.1.3902.1082.20.30.2.5.2
This table includes the saved patch information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSavedPatchEntry

zxAnSwSavedPatchEntry 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1
An entry in zxAnSwSavedPatchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSavedPatchEntry  

zxAnSwPatchRack 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.1
The rack number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwPatchShelf 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.2
The shelf number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwPatchSlot 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.3
The slot number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwPatchName 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.4
The patch file name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwPatchOwnerSwVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.5
The software version of the patch belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwPatchVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.6
The version tag of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwPatchSize 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.7
The patch file length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwPatchBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.8
The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwPatchConfActiveStatus 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.9
The configured active status of the patch file. activated -- to activate the patch file. deactivated -- to deactivate the patch file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER activated(1), deactivated(2)  

zxAnSwPatchDescription 1.3.6.1.4.1.3902.1082.20.30.2.5.2.1.10
The patch description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxAnSwCardPatchRunStatusTable 1.3.6.1.4.1.3902.1082.20.30.2.5.3
This table includes the patch running status information of the card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwCardPatchRunStatusEntry

zxAnSwCardPatchRunStatusEntry 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1
An entry in zxAnSwCardPatchRunStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwCardPatchRunStatusEntry  

zxAnSwCardPatchName 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.1
The patch file name of the card.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardPatchOwnerSwVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.2
The software version of the patch belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardPatchVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.3
The version tag of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwCardPatchSize 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.4
The patch file length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwCardPatchBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.5
The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardPatchActivatedTime 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.6
The time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwCardPatchDescription 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.7
The patch description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxAnSwCardPatchRunningStatus 1.3.6.1.4.1.3902.1082.20.30.2.5.3.1.8
The patch running status. activatingSucceeded(1) : value 1 means the activating operation of the patch file is succeeded. activatingFailed(2) : value 2 means the activating operation of the patch file is failed. waitingToBeActivated(3): value 3 means the patch file is waiting to be activated. resettingCardNeeded(4) : value 4 means the patch file has been successfully activated and the card needs to be reset. mismatched(5) : value 5 means the version of the patch file is not matched with the version of the card software.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER activatingSucceeded(1), activatingFailed(2), waitingToBeActivated(3), resettingCardNeeded(4), mismatched(5)  

zxAnSwSubcardRunningPatchTable 1.3.6.1.4.1.3902.1082.20.30.2.5.4
This table includes the subcard patch information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSubcardRunningPatchEntry

zxAnSwSubcardRunningPatchEntry 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1
An entry in zxAnSwSubcardRunningPatchTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSubcardRunningPatchEntry  

zxAnSwPatchSubcardSlot 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.1
The slot number of the subcard.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardPatchName 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.2
The file name of the patch
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardPatchOwnerSwVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.3
The software version of the patch belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardPatchVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.4
The version tag of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwSubcardPatchSize 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.5
The patch file length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwSubcardPatchBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.6
The time of patch build. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSubcardPatchActivatedTime 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.7
The time of the patch activated. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwSubcardPatchDescription 1.3.6.1.4.1.3902.1082.20.30.2.5.4.1.8
The patch description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxAnSwSavedPatchPackageTable 1.3.6.1.4.1.3902.1082.20.30.2.5.5
This table includes the saved patch package information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSavedPatchPackageEntry

zxAnSwSavedPatchPackageEntry 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1
An entry in zxAnSwSavedPatchPackageTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSavedPatchPackageEntry  

zxAnSwPatchPkgName 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.1
The name of the patch package.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwPatchPkgVersion 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.2
The version of the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnSwPatchPkgSize 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.3
The size of the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnSwPatchPkgBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.4
The build time of patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwPatchPkgDescription 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.5
The description of the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxAnSwPatchPkgConfActiveStatus 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.6
The configured active status of the patch package. activated(1) : value 1 means the configured active status of the patch package is activated. deactivated(2) : value 2 means the configured active status of the patch package is deactivated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER activated(1), deactivated(2)  

zxAnSwPatchPkgActualActiveStatus 1.3.6.1.4.1.3902.1082.20.30.2.5.5.1.7
The actual active status of the patch package. activated(1) : value 1 means the patch package is activated. deactivated(2) : value 2 means the patch package is deactivated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER activated(1), deactivated(2)  

zxAnSwSavedPatchPackageFileTable 1.3.6.1.4.1.3902.1082.20.30.2.5.6
This table includes the information of the file inside the patch package.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnSwSavedPatchPackageFileEntry

zxAnSwSavedPatchPackageFileEntry 1.3.6.1.4.1.3902.1082.20.30.2.5.6.1
An entry in zxAnSwSavedPatchPackageFileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnSwSavedPatchPackageFileEntry  

zxAnSwPatchPkgFileName 1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.1
The name of the file inside the patch package.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnSwPatchPkgFileBuildTime 1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.2
The build time of the file inside the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnSwPatchPkgFileNeedResetCard 1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.3
Whether the card needs to be reset. yes(1) : value 1 means need to reset the card. no(2) : value 2 means no need to reset the card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

zxAnSwPatchPkgFileActiveStatus 1.3.6.1.4.1.3902.1082.20.30.2.5.6.1.4
The patch file active status. activated(1) : value 1 means the patch file is activated. deactivated(2) : value 2 means the patch file is deactivated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER activated(1), deactivated(2)  

zxAnSwAutoUpdateFinished 1.3.6.1.4.1.3902.1082.20.30.3.1.1
A zxAnSwAutoUpdateFinished is sent when the agent has detected that the automatic update is finished.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxAnSwAutoUpdateSwDiffer 1.3.6.1.4.1.3902.1082.20.30.3.1.2
A zxAnSwAutoUpdateSwDiffer is sent when the agent has detected different version files between NE and file server.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxAnSwAutoUpdateSwChkFailed 1.3.6.1.4.1.3902.1082.20.30.3.1.3
A zxAnSwAutoUpdateSwChkFailed is sent when the agent has detected that version check is failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxAnSwConformance 1.3.6.1.4.1.3902.1082.20.30.4
OBJECT IDENTIFIER    

zxAnSwCompliances 1.3.6.1.4.1.3902.1082.20.30.4.1
OBJECT IDENTIFIER    

zxAnSwGroups 1.3.6.1.4.1.3902.1082.20.30.4.2
OBJECT IDENTIFIER    

zxAnSwCompliance 1.3.6.1.4.1.3902.1082.20.30.4.1.1
The compliance statement for SNMP entities which implement the ZTE-AN-SOFTWARE-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

zxAnSwCardRunVerGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.1
The collection of objects which are used to represent chassis version information, include card running version information.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwSubcardRunVerGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.2
The collection of objects which are used to represent chassis version information, include subcard running version information.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwImageGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.3
The collection of objects which are used to represent chassis version information, include card saved version information.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwManualUpdateGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.4
The collection of objects which are used to update software by manual.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwManualUpdateStatusGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.5
The collection of objects which are used to represent chassis software update status.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwAutoUpdateChkGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.6
The collection of objects which are used to management version automatic updating. Automatic version check to list the different files name between NE and file server.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwAutoUpdateOperGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.7
The collection of objects which are used to management version automatic updating. Automatic version update to download version from file server and to take effect.
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwSwapGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.8
The collection of objects which are used to swap version .
Status: current Access: read-only
OBJECT-GROUP    

zxAnSwNotificationsGroup 1.3.6.1.4.1.3902.1082.20.30.4.2.9
The notifications which indicate specific changes, include automatic update check,automatic update status.
Status: current Access: read-only
OBJECT-GROUP