| ZxAnPonOnuIfAttrEntry |
|
| SEQUENCE |
|
|
|
| |
zxAnPonOnuIfId |
Integer32 |
|
| |
zxAnPonOnuIfAttr1 |
Integer32 |
|
| |
zxAnPonOnuIfAttr2 |
Integer32 |
|
| |
zxAnPonOnuIfAttr3 |
Integer32 |
|
| |
zxAnPonOnuIfAttr4 |
Integer32 |
|
| |
zxAnPonOnuIfAttr5 |
Integer32 |
|
| |
zxAnPonOnuIfAttr6 |
Integer32 |
|
| |
zxAnPonOnuIfAttr7 |
Integer32 |
|
| |
zxAnPonOnuIfAttr8 |
Integer32 |
|
| |
zxAnPonOnuIfAttr9 |
Integer32 |
|
| |
zxAnPonOnuIfAttr10 |
Integer32 |
|
| |
zxAnPonOnuIfAttrRowStatus |
RowStatus |
|
| ZxAnPonRxOpticalPowerThreshEntry |
|
| SEQUENCE |
|
|
|
| |
zxAnPonRxPowerRisingAlarmThresh |
Integer32 |
|
| |
zxAnPonRxPowerFallingAlarmThresh |
Integer32 |
|
| |
zxAnPonRxPowerDetectPeriod |
Unsigned32 |
|
| |
zxAnPonRxPowerRestoreDefault |
INTEGER |
|
| ZxAnPonRogueOnuDetectInfoEntry |
|
| SEQUENCE |
|
|
|
| |
zxAnRogueOnuSlot |
Integer32 |
|
| |
zxAnRogueOnuDetectEnable |
INTEGER |
|
| |
zxAnRogueOnuLocatingEnable |
INTEGER |
|
| |
zxAnRogueOnuAutoCloseEnable |
INTEGER |
|
| ZxAnPonRogueOnuInfoEntry |
|
| SEQUENCE |
|
|
|
| |
zxAnPonRogueOnuInstIndex |
Integer32 |
|
| |
zxAnPonRogueOnuAuthStatus |
INTEGER |
|
| |
zxAnPonRogueOnuId |
Integer32 |
|
| |
zxAnPonRogueOnuMacAddress |
MacAddress |
|
| |
zxAnPonRogueOnuSerialNumber |
DisplayString |
|
| |
zxAnPonRogueOnuDetectedTime |
DateAndTime |
|
| ZxAnPonPortRogueOnuConfEntry |
|
| SEQUENCE |
|
|
|
| |
zxAnPortRogueOnuLocatingEnable |
INTEGER |
|
| |
zxAnPortRogueOnuAutoCloseEnable |
INTEGER |
|
| |
zxAnPortRogueOnuDetectEnable |
INTEGER |
|
| zxAnPonOnuTypeEntry |
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1 |
| Entry of zxAnPonOnuTypeTable.
For the default ONU type such as ZTE-F641,ZTE-F622,
ZTE-F625, ZTE-F621, ZTE-F601, ZTE-F640, ZTE-F628, ZTE-9806,
ZTE-D400, ZTE-D402, ZTE-D420, ZTE-D421, ZTE-D422, ZTE-F401,
ZTE-F420, ZTE-F425, ZTE-F429, ZTE-F430, ZTE-F435, ZTE-F500,
ZTE-F803, ZTE-F820, ZTE-F821, ZTE-F822, set operation is prohibited.
The multi-variables binding rule should be complied with
when a manager configures ONU type. According to this rule,
all the related mib variables must be included in one SNMP
set operation.
There are two types of variables: mandatory and optional.
All of the mandatory variables must be included in one SNMP
set operation. Optional variables may be included in one
SNMP set operation with the mandatory variables, but must
not be used alone.
To create or modify ONU type, the mandatory variables are as
follows:
mandatoty: zxAnPonOnuTypePonType. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonOnuTypeEntry |
|
|
| zxAnPonOnuTypeAttr8 |
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.11 |
| A set of capabilities information about ONU.
| MSB |Byte2|Byte1| LSB |
|---------------------------------------------------------------------------|
|Rese-|Rese-|Rese-|Rese-| GIS |Extended| | |Multicast| OMCI |
|rved |rved |rved |rved |Function | OMCI | MGC | VRG | Address |Sending|
|(8bi-|(8bi-|(8bi-|(1bi-| Enabling|Enabling| Mode | | Range | Mode |
| ts) | ts) | ts) | ts)-|(1bit) | (1bit) |(2bits)|(1bit)| (1bit) |(1bit) |
|----------------------- --------------------------------------------------|
Bits 7 - 31 are reserved for future use.
Bit 0 represents OMCI sending mode, default value is 0.
If the bit is set to 1, OLT sends OMCI by synchronous mode.
If the bit is set to 0, OLT sends OMCI by asynchronous mode.
Bit 1 represents default multicast address range mode,
default value is 0.
If the bit is set to 1, default multicast address range is
all-inclusive mode(224.0.0.0-239.255.255.255).
If the bit is set to 0, default multicast address range is none.
Bit 2 represents VRG enabling status, default value is 0.
If the bit is set to 1, VRG function of the ONU is enabled.
If the bit is set to 0, VRG function of the ONU is disabled.
This attribute is not used for EPON.
Bit 3 and bit 4 represent MGC configuration mode, default value
is 0. If both of two bits are set to 0, the MGC configuration mode
is private. If bit 3 is set to 1 and bit 4 is set to 0, the MGC
configuration mode is ITU-T. If bit 3 is set to 0 and bit 4 is set
to 1, the MGC configure mode is both.
Bit 5 represents extended OMCI enabling status, default value is 0.
If the bit is set to 1, extended OMCI is enabled.
If the bit is set to 0, extended OMCI is disabled.
This attribute is not used for EPON.
Bit 6 represents PON GIS function is supported or not,
default value is 0.
If the bit is set to 1, GIS function is supported.
If the bit is set to 0, GIS function is not supported. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| zxAnPonOnuIfAttrEntry |
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1 |
| Entry of zxAnPonOnuIfAttrTable.
Entries in the zxAnPonOnuIfAttrTable are created and
deleted using the zxAnPonOnuIfAttrRowStatus object,
modify is prohibited. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonOnuIfAttrEntry |
|
|
| zxAnPonRxOpticalPowerEntry |
1.3.6.1.4.1.3902.1082.500.1.2.4.2.1 |
| Entry of zxAnPonRxOpticalPowerTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonRxOpticalPowerEntry |
|
|
| zxAnPonRxOpticalPowerThreshEntry |
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1 |
| Entry of zxAnPonRxOpticalPowerThreshTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonRxOpticalPowerThreshEntry |
|
|
| zxAnPonRogueOnuDetectInfoEntry |
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1 |
| Entry of zxAnPonRogueOnuDetectInfoTable.
The multi-variables binding rule should be complied with
when a manager configures rogue ONU detect.
According to this rule,
all the related mib variables must be included in one SNMP
set operation.
There are two types of variables: mandatory and optional.
All of the mandatory variables must be included in one SNMP
set operation. Optional variables may be included in one
SNMP set operation with the mandatory variables, but must
not be used alone.
To configure rogue ONU detect, the mandatory and
optional variables are as follows:
mandatoty: zxAnRogueOnuDetectEnable,
zxAnRogueOnuLocatingEnable,
zxAnRogueOnuAutoCloseEnable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonRogueOnuDetectInfoEntry |
|
|
| zxAnPonRogueOnuInfoEntry |
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1 |
| It is an entry in the zxAnPonRogueOnuInfoTable. The index
'ifIndex' represents the normal OLT index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonRogueOnuInfoEntry |
|
|
| zxAnPonPortRogueOnuConfEntry |
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4.1 |
| The PON port rogue ONU management entry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ZxAnPonPortRogueOnuConfEntry |
|
|
