ZTE-AN-INTERFACE-STATS-MIB

File: ZTE-AN-INTERFACE-STATS-MIB.mib (146015 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB ZTE-AN-TC-MIB ZTE-AN-SMI
HC-PerfHist-TC-MIB ZTE-AN-IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Gauge32 Counter64
Counter32 RowStatus DisplayString
TruthValue TEXTUAL-CONVENTION DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP ifIndex
VlanId zxAnInterface HCPerfCurrentCount
zxAnSubIfIndex

Defined Types

ZxAnEthIfCurrStatsEntry  
SEQUENCE    
  zxAnEthIfInOctets Counter64
  zxAnEthIfInPkts Counter64
  zxAnEthIfInUcastPkts Counter64
  zxAnEthIfInMcastPkts Counter64
  zxAnEthIfInBcastPkts Counter64
  zxAnEthIfInOversizedPkts Counter64
  zxAnEthIfInUndersizedPkts Counter64
  zxAnEthIfOutOctets Counter64
  zxAnEthIfOutPkts Counter64
  zxAnEthIfOutUcastPkts Counter64
  zxAnEthIfOutMcastPkts Counter64
  zxAnEthIfOutBcastPkts Counter64
  zxAnEthIfOutPausePkts Counter64
  zxAnEthIfOutDiscardPkts Counter64
  zxAnEthIfOutCollisions Counter64
  zxAnEthIfSingleCollisions Counter64
  zxAnEthIfMultipleCollisions Counter64
  zxAnEthIfFcsErrors Counter64
  zxAnEthIfAlignmentErrors Counter64
  zxAnEthIfInCrcErrPkts Counter64
  zxAnEthIfInDiscardPkts Counter64
  zxAnEthIfInErrPkts Counter64
  zxAnEthIfOutErrPkts Counter64
  zxAnEthIfLinkStatusChanges Counter32
  zxAnEthIfInDropEvents Counter64
  zxAnEthIfOutDropEvents Counter64
  zxAnEthIfOutCrcErrPkts Counter64
  zxAnEthIfOutOversizedPkts Counter64
  zxAnEthIfOutUndersizedPkts Counter64
  zxAnEthIfInFragments Counter64
  zxAnEthIfOutFragments Counter64
  zxAnEthIfInJabbers Counter64
  zxAnEthIfOutJabbers Counter64
  zxAnEthIfInPkts64Octets Counter64
  zxAnEthIfOutPkts64Octets Counter64
  zxAnEthIfInPkts65to127Octets Counter64
  zxAnEthIfOutPkts65to127Octets Counter64
  zxAnEthIfInPkts128to255Octets Counter64
  zxAnEthIfOutPkts128to255Octets Counter64
  zxAnEthIfInPkts256to511Octets Counter64
  zxAnEthIfOutPkts256to511Octets Counter64
  zxAnEthIfInPkts512to1023Octets Counter64
  zxAnEthIfOutPkts512to1023Octets Counter64
  zxAnEthIfInPkts1024to1518Octets Counter64
  zxAnEthIfOutPkts1024to1518Octets Counter64
  zxAnEthIfReset INTEGER

ZxAnBrgIfCurrStatsEntry  
SEQUENCE    
  zxAnBrgIfInOctets Counter64
  zxAnBrgIfInUcastPkts Counter64
  zxAnBrgIfInMcastPkts Counter64
  zxAnBrgIfInBcastPkts Counter64
  zxAnBrgIfOutOctets Counter64
  zxAnBrgIfOutUcastPkts Counter64
  zxAnBrgIfOutMcastPkts Counter64
  zxAnBrgIfOutBcastPkts Counter64
  zxAnBrgIfInDiscardPkts Counter64
  zxAnBrgIfOutDiscardPkts Counter64
  zxAnBrgIfReset INTEGER

ZxAnLagIfCurrStatsEntry  
SEQUENCE    
  zxAnLagIfInPkts Counter64
  zxAnLagIfOutPkts Counter64
  zxAnLagIfInOctets Counter64
  zxAnLagIfOutOctets Counter64
  zxAnLagIfInUcastPkts Counter64
  zxAnLagIfOutUcastPkts Counter64
  zxAnLagIfInMcastPkts Counter64
  zxAnLagIfOutMcastPkts Counter64
  zxAnLagIfInBcastPkts Counter64
  zxAnLagIfOutBcastPkts Counter64
  zxAnLagIfInErrPkts Counter64
  zxAnLagIfOutErrPkts Counter64
  zxAnLagIfInPkts64Octets Counter64
  zxAnLagIfOutPkts64Octets Counter64
  zxAnLagIfInPkts65to127Octets Counter64
  zxAnLagIfOutPkts65to127Octets Counter64
  zxAnLagIfInPkts128to255Octets Counter64
  zxAnLagIfOutPkts128to255Octets Counter64
  zxAnLagIfInPkts256to511Octets Counter64
  zxAnLagIfOutPkts256to511Octets Counter64
  zxAnLagIfInPkts512to1023Octets Counter64
  zxAnLagIfOutPkts512to1023Octets Counter64
  zxAnLagIfInPkts1024to1518Octets Counter64
  zxAnLagIfOutPkts1024to1518Octets Counter64
  zxAnLagIfInOversizedPkts Counter64
  zxAnLagIfOutOversizedPkts Counter64
  zxAnLagIfInUndersizedPkts Counter64
  zxAnLagIfOutUndersizedPkts Counter64
  zxAnLagIfInDiscardPkts Counter64
  zxAnLagIfOutDiscardPkts Counter64
  zxAnLagIfInCrcErrPkts Counter64
  zxAnLagIfOutCrcErrPkts Counter64
  zxAnLagIfInDropEvents Counter64
  zxAnLagIfOutDropEvents Counter64
  zxAnLagIfInFragments Counter64
  zxAnLagIfOutFragments Counter64
  zxAnLagIfInJabbers Counter64
  zxAnLagIfOutJabbers Counter64
  zxAnLagIfOutPausePkts Counter64
  zxAnLagIfOutCollisions Counter64
  zxAnLagIfSingleCollisions Counter64
  zxAnLagIfMultipleCollisions Counter64
  zxAnLagIfFcsErrors Counter64
  zxAnLagIfAlignmentErrors Counter64
  zxAnLagIfLinkStatusChanges Counter32
  zxAnLagIfReset INTEGER

ZxAnIfRateStatsEntry  
SEQUENCE    
  zxAnIfCurrTxNetDataRate Integer32
  zxAnIfCurrRxNetDataRate Integer32
  zxAnIfCurrTxOctetRate Gauge32
  zxAnIfCurrRxOctetRate Gauge32
  zxAnIfCurrTxPktRate Gauge32
  zxAnIfCurrRxPktRate Gauge32
  zxAnIfCurrTxOctetPeakRate Gauge32
  zxAnIfCurrRxOctetPeakRate Gauge32
  zxAnIfCurrTxErroredPktRate Gauge32
  zxAnIfCurrRxErroredPktRate Gauge32

ZxAnIfBandwidthUsingEntry  
SEQUENCE    
  zxAnIfInBandwidthUsingRatio Integer32
  zxAnIfOutBandwidthUsingRatio Integer32
  zxAnIfInBandwidthUsingThresh Integer32
  zxAnIfOutBandwidthUsingThresh Integer32
  zxAnIfInBandwidthUsingRatioHa Integer32
  zxAnIfOutBandwidthUsingRatioHa Integer32

ZxAnIfNumberStatsEntry  
SEQUENCE    
  zxAnIfNumberStatsIfType INTEGER
  zxAnIfNumberStatsTotalNumber Integer32
  zxAnIfNumberStatsOnlineNumber Integer32

ZxAnIfVlanCurrStatsEntry  
SEQUENCE    
  zxAnIfVid VlanId
  zxAnIfVlanInPkts Counter64
  zxAnIfVlanOutPkts Counter64
  zxAnIfVlanInOctets Counter64
  zxAnIfVlanOutOctets Counter64
  zxAnIfVlanInUcastPkts Counter64
  zxAnIfVlanOutUcastPkts Counter64
  zxAnIfVlanInUcastOctets Counter64
  zxAnIfVlanOutUcastOctets Counter64
  zxAnIfVlanInMcastPkts Counter64
  zxAnIfVlanOutMcastPkts Counter64
  zxAnIfVlanInMcastOctets Counter64
  zxAnIfVlanOutMcastOctets Counter64
  zxAnIfVlanInBcastPkts Counter64
  zxAnIfVlanOutBcastPkts Counter64
  zxAnIfVlanInBcastOctets Counter64
  zxAnIfVlanOutBcastOctets Counter64
  zxAnIfVlanInFloodPkts Counter64
  zxAnIfVlanOutFloodPkts Counter64
  zxAnIfVlanInFloodOctets Counter64
  zxAnIfVlanOutFloodOctets Counter64
  zxAnIfVlanInDiscardPkts Counter64
  zxAnIfVlanOutDiscardPkts Counter64
  zxAnIfVlanInDiscardOctets Counter64
  zxAnIfVlanOutDiscardOctets Counter64
  zxAnIfVlanInErrorPkts Counter64
  zxAnIfVlanOutErrorPkts Counter64
  zxAnIfVlanInErrorOctets Counter64
  zxAnIfVlanOutErrorOctets Counter64
  zxAnIfVlanCurrStatsReset INTEGER
  zxAnIfVlanCurrStatsRowStatus RowStatus

ZxAnIfVlanRateStatsEntry  
SEQUENCE    
  zxAnIfVlanRxPktRate Gauge32
  zxAnIfVlanTxPktRate Gauge32
  zxAnIfVlanRxPktPeakRate Gauge32
  zxAnIfVlanTxPktPeakRate Gauge32
  zxAnIfVlanRxUcastPktRate Gauge32
  zxAnIfVlanTxUcastPktRate Gauge32
  zxAnIfVlanRxUcastPktPeakRate Gauge32
  zxAnIfVlanTxUcastPktPeakRate Gauge32
  zxAnIfVlanRxMcastPktRate Gauge32
  zxAnIfVlanTxMcastPktRate Gauge32
  zxAnIfVlanRxMcastPktPeakRate Gauge32
  zxAnIfVlanTxMcastPktPeakRate Gauge32
  zxAnIfVlanRxBcastPktRate Gauge32
  zxAnIfVlanTxBcastPktRate Gauge32
  zxAnIfVlanRxBcastPktPeakRate Gauge32
  zxAnIfVlanTxBcastPktPeakRate Gauge32
  zxAnIfVlanRxFloodPktRate Gauge32
  zxAnIfVlanTxFloodPktRate Gauge32
  zxAnIfVlanRxFloodPktPeakRate Gauge32
  zxAnIfVlanTxFloodPktPeakRate Gauge32
  zxAnIfVlanRxDiscardPktRate Gauge32
  zxAnIfVlanTxDiscardPktRate Gauge32
  zxAnIfVlanRxDiscardPktPeakRate Gauge32
  zxAnIfVlanTxDiscardPktPeakRate Gauge32
  zxAnIfVlanRxErrorPktRate Gauge32
  zxAnIfVlanTxErrorPktRate Gauge32
  zxAnIfVlanRxErrorPktPeakRate Gauge32
  zxAnIfVlanTxErrorPktPeakRate Gauge32

ZxAnIfVlan2CurrStatsEntry  
SEQUENCE    
  zxAnIfVlan2CurrStatsSVid VlanId
  zxAnIfVlan2CurrStatsCVid Integer32
  zxAnIfVlan2InPkts Counter64
  zxAnIfVlan2OutPkts Counter64
  zxAnIfVlan2InOctets Counter64
  zxAnIfVlan2OutOctets Counter64
  zxAnIfVlan2CurrStatsReset INTEGER

ZxAnBrgIfCurrPerfStatsEntry  
SEQUENCE    
  zxAnBrgIfCurrPerfStatsRowStatus RowStatus

ZxAnIfVlanCurrPerfStatsEntry  
SEQUENCE    
  zxAnIfVlanPerfStatsSVid VlanId
  zxAnIfVlanPerfStatsCVid Integer32
  zxAnIfVlanPerfStatsRowStatus RowStatus

ZxAnVnd0EthIfCurrStatsEntry  
SEQUENCE    
  zxAnVnd0EthIfInOctets Counter64
  zxAnVnd0EthIfOutOctets Counter64
  zxAnVnd0EthIfInPkts Counter64
  zxAnVnd0EthIfOutPkts Counter64
  zxAnVnd0EthIfInUcastPkts Counter64
  zxAnVnd0EthIfOutUcastPkts Counter64
  zxAnVnd0EthIfInMcastPkts Counter64
  zxAnVnd0EthIfOutMcastPkts Counter64
  zxAnVnd0EthIfInBcastPkts Counter64
  zxAnVnd0EthIfOutBcastPkts Counter64
  zxAnVnd0EthIfRxOctetRate Gauge32
  zxAnVnd0EthIfTxOctetRate Gauge32
  zxAnVnd0EthIfRxPktRate Gauge32
  zxAnVnd0EthIfTxPktRate Gauge32
  zxAnVnd0EthIfRxOctetPeakRate Gauge32
  zxAnVnd0EthIfTxOctetPeakRate Gauge32
  zxAnVnd0EthIfInBwUsingRatio Integer32
  zxAnVnd0EthIfOutBwUsingRatio Integer32
  zxAnVnd0EthIfInBwUsingRatioHa Integer32
  zxAnVnd0EthIfOutBwUsingRatioHa Integer32
  zxAnVnd0EthIfLinkStatusChanges Counter32
  zxAnVnd0EthIfReset INTEGER

ZxAnVnd0LagIfCurrStatsEntry  
SEQUENCE    
  zxAnVnd0LagIfInOctets Counter64
  zxAnVnd0LagIfOutOctets Counter64
  zxAnVnd0LagIfInPkts Counter64
  zxAnVnd0LagIfOutPkts Counter64
  zxAnVnd0LagIfInUcastPkts Counter64
  zxAnVnd0LagIfOutUcastPkts Counter64
  zxAnVnd0LagIfInMcastPkts Counter64
  zxAnVnd0LagIfOutMcastPkts Counter64
  zxAnVnd0LagIfInBcastPkts Counter64
  zxAnVnd0LagIfOutBcastPkts Counter64
  zxAnVnd0LagIfRxOctetRate Gauge32
  zxAnVnd0LagIfTxOctetRate Gauge32
  zxAnVnd0LagIfRxPktRate Gauge32
  zxAnVnd0LagIfTxPktRate Gauge32
  zxAnVnd0LagIfRxOctetPeakRate Gauge32
  zxAnVnd0LagIfTxOctetPeakRate Gauge32
  zxAnVnd0LagIfInBwUsingRatio Integer32
  zxAnVnd0LagIfOutBwUsingRatio Integer32
  zxAnVnd0LagIfInBwUsingRatioHa Integer32
  zxAnVnd0LagIfOutBwUsingRatioHa Integer32
  zxAnVnd0LagIfLinkStatusChanges Counter32
  zxAnVnd0LagIfReset INTEGER

Defined Values

zxAnInterfaceStatsMib 1.3.6.1.4.1.3902.1082.30.31
The MIB module for the Performance Management of ZTE Access Node interface.
MODULE-IDENTITY    

zxAnIfPerfGlobalObjects 1.3.6.1.4.1.3902.1082.30.31.1
OBJECT IDENTIFIER    

zxAnIfPerfObjects 1.3.6.1.4.1.3902.1082.30.31.2
OBJECT IDENTIFIER    

zxAnIfPerfNotifications 1.3.6.1.4.1.3902.1082.30.31.3
OBJECT IDENTIFIER    

zxAnIfPerfConformance 1.3.6.1.4.1.3902.1082.30.31.4
OBJECT IDENTIFIER    

zxAnIfPerfCompliances 1.3.6.1.4.1.3902.1082.30.31.4.1
OBJECT IDENTIFIER    

zxAnIfPerfGroups 1.3.6.1.4.1.3902.1082.30.31.4.2
OBJECT IDENTIFIER    

zxAnPvcIfStatsGlobalMode 1.3.6.1.4.1.3902.1082.30.31.1.1
The global mode of PVC interface statistics. allStarted(1): Statistics of all the PVC interfaces are started. allStopped(2): Statistics of all the PVC interfaces are stopped. invalid(3): The global mode is invalid. Only statistics of the PVC interfaces in zxAnPvcIfCurrStatsTable are started.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allStarted(1), allStopped(2), invalid(3)  

zxAnEthIfCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.2
Current performance data table of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnEthIfCurrStatsEntry

zxAnEthIfCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.2.1
Current performance data entry of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnEthIfCurrStatsEntry  

zxAnEthIfInOctets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.1
The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.2
The total number of packets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.3
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInOversizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.6
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInUndersizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.7
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.8
The total number of octets transmitted out of the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.9
The total number of packets transmitted out of the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.11
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.12
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPausePkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.13
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.14
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutCollisions 1.3.6.1.4.1.3902.1082.30.31.2.2.1.15
A count of frames that are involved in out collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfSingleCollisions 1.3.6.1.4.1.3902.1082.30.31.2.2.1.16
A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfMultipleCollisions 1.3.6.1.4.1.3902.1082.30.31.2.2.1.17
A count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfFcsErrors 1.3.6.1.4.1.3902.1082.30.31.2.2.1.18
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfAlignmentErrors 1.3.6.1.4.1.3902.1082.30.31.2.2.1.19
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. This counter does not increment for group encoding schemes greater than 4 bits per group. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsAlignmentErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInCrcErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.20
The total number of CRC errored packets received on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.21
The total number of discarded packets received on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.22
The total number of errored packets received on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.23
The total number of errored packets that could not be transmitted from the interface because of errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfLinkStatusChanges 1.3.6.1.4.1.3902.1082.30.31.2.2.1.24
The total number of the link status changes on the interface. The total number starts from zero and is increased when the link status changes from up to down, or from down to up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxAnEthIfInDropEvents 1.3.6.1.4.1.3902.1082.30.31.2.2.1.25
The total number of events in which packets received were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutDropEvents 1.3.6.1.4.1.3902.1082.30.31.2.2.1.26
The total number of events in which packets transmitted were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutCrcErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.27
The total number of CRC errored packets transmitted out of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutOversizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.28
The total number of packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutUndersizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.2.1.29
The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInFragments 1.3.6.1.4.1.3902.1082.30.31.2.2.1.30
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutFragments 1.3.6.1.4.1.3902.1082.30.31.2.2.1.31
The total number of packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInJabbers 1.3.6.1.4.1.3902.1082.30.31.2.2.1.32
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutJabbers 1.3.6.1.4.1.3902.1082.30.31.2.2.1.33
The total number of packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts64Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.34
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts64Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.35
The total number of packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts65to127Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.36
The total number of packets (including bad packets) received that were between 65 and 127 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts65to127Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.37
The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts128to255Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.38
The total number of packets (including bad packets) received that were between 128 and 255 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts128to255Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.39
The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts256to511Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.40
The total number of packets (including bad packets) received that were between 256 and 511 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts256to511Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.41
The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts512to1023Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.42
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts512to1023Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.43
The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfInPkts1024to1518Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.44
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfOutPkts1024to1518Octets 1.3.6.1.4.1.3902.1082.30.31.2.2.1.45
The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length (excluding framing bits but including FCS octets).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnEthIfReset 1.3.6.1.4.1.3902.1082.30.31.2.2.1.100
Clear all the current performance variables. When get this When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnBrgIfCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.3
Current performance data table of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfCurrStatsEntry

zxAnBrgIfCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.3.1
Current performance data entry of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfCurrStatsEntry  

zxAnBrgIfInOctets 1.3.6.1.4.1.3902.1082.30.31.2.3.1.1
The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.2
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.3
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.3.1.5
The total number of octets transmitted out of the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.6
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.7
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfInDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.9
The total number of received discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfOutDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.3.1.10
The total number of transmitted discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfReset 1.3.6.1.4.1.3902.1082.30.31.2.3.1.100
Clear all the current performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnLagIfCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.4
Current performance data table of LAG.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnLagIfCurrStatsEntry

zxAnLagIfCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.4.1
Current performance data entry of LAG.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnLagIfCurrStatsEntry  

zxAnLagIfInPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.1
The total number of packets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.2
The total number of packets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInOctets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.3
The total number of octets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.4
The total number of octets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.5
The total number of unicast packets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.6
The total number of unicast packets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.7
The total number of multicast packets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.8
The total number of multicast packets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.9
The total number of broadcast packets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.10
The total number of broadcast packets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.11
The total number of error packets received on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.12
The total number of error packets transmitted on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts64Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.13
The total number of packets received that were 64 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts64Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.14
The total number of packets transmitted that were 64 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts65to127Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.15
The total number of packets received that were between 65 and 127 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts65to127Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.16
The total number of packets transmitted that were between 65 and 127 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts128to255Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.17
The total number of packets received that were between 128 and 255 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts128to255Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.18
The total number of packets transmitted that were between 128 and 255 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts256to511Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.19
The total number of packets received that were between 256 and 511 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts256to511Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.20
The total number of packets transmitted that were between 256 and 511 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts512to1023Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.21
The total number of packets received that were between 512 and 1023 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts512to1023Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.22
The total number of packets transmitted that were between 512 and 1023 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInPkts1024to1518Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.23
The total number of packets received that were between 1024 and 1518 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPkts1024to1518Octets 1.3.6.1.4.1.3902.1082.30.31.2.4.1.24
The total number of packets transmitted that were between 1024 and 1518 octets in length on the LAG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInOversizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.25
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutOversizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.26
The total number of packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInUndersizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.27
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutUndersizedPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.28
The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.29
The total number of discarded packets received on the LAG interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.30
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInCrcErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.31
The total number of CRC errored packets received on the LAG interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutCrcErrPkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.32
The total number of CRC errored packets transmitted out of the LAG interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInDropEvents 1.3.6.1.4.1.3902.1082.30.31.2.4.1.33
The total number of events in which packets received were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutDropEvents 1.3.6.1.4.1.3902.1082.30.31.2.4.1.34
The total number of events in which packets transmitted were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInFragments 1.3.6.1.4.1.3902.1082.30.31.2.4.1.35
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutFragments 1.3.6.1.4.1.3902.1082.30.31.2.4.1.36
The total number of packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfInJabbers 1.3.6.1.4.1.3902.1082.30.31.2.4.1.37
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutJabbers 1.3.6.1.4.1.3902.1082.30.31.2.4.1.38
The total number of packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutPausePkts 1.3.6.1.4.1.3902.1082.30.31.2.4.1.39
A count of MAC Control frames transmitted on this LAG interface with an opcode indicating the PAUSE operation. This counter does not increment when the LAG interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfOutCollisions 1.3.6.1.4.1.3902.1082.30.31.2.4.1.40
A count of frames that are involved in out collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfSingleCollisions 1.3.6.1.4.1.3902.1082.30.31.2.4.1.41
A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfMultipleCollisions 1.3.6.1.4.1.3902.1082.30.31.2.4.1.42
A count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfFcsErrors 1.3.6.1.4.1.3902.1082.30.31.2.4.1.43
A count of frames received on a particular LAG interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfAlignmentErrors 1.3.6.1.4.1.3902.1082.30.31.2.4.1.44
A count of frames received on a particular LAG interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. This counter does not increment for group encoding schemes greater than 4 bits per group. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsAlignmentErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnLagIfLinkStatusChanges 1.3.6.1.4.1.3902.1082.30.31.2.4.1.45
The total number of the link status changes on the LAG interface. The total number starts from zero and is increased when the link status changes from up to down, or from down to up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxAnLagIfReset 1.3.6.1.4.1.3902.1082.30.31.2.4.1.100
Clear all the statistics of LAG. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnIfRateStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.20
The rate statistics table of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfRateStatsEntry

zxAnIfRateStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.20.1
The rate statistics entry of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfRateStatsEntry  

zxAnIfCurrTxNetDataRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.1
Current actual transmitted net data rate of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnIfCurrRxNetDataRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.2
Current actual received net data rate of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnIfCurrTxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.3
An estimate of the interface's current transmitted bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrRxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.4
An estimate of the interface's current received bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrTxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.5
An estimate of the interface's current transmitted bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrRxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.6
An estimate of the interface's current received bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrTxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.7
The interface's peak transmitted bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrRxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.8
The interface's peak received bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrTxErroredPktRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.9
Current transmitted errored packet rate.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfCurrRxErroredPktRate 1.3.6.1.4.1.3902.1082.30.31.2.20.1.10
Current received errored packet rate.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfBandwidthUsingTable 1.3.6.1.4.1.3902.1082.30.31.2.30
Bandwidth using ratio and threshold table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfBandwidthUsingEntry

zxAnIfBandwidthUsingEntry 1.3.6.1.4.1.3902.1082.30.31.2.30.1
Bandwidth using entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfBandwidthUsingEntry  

zxAnIfInBandwidthUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.30.1.1
An estimate of the interface's current received bandwidth using ratio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnIfOutBandwidthUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.30.1.2
An estimate of the interface's current transmitted bandwidth using ratio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnIfInBandwidthUsingThresh 1.3.6.1.4.1.3902.1082.30.31.2.30.1.3
The threshold of zxAnIfInBandwidthUsingRatio. When zxAnIfInBandwidthUsingRatio exceeds this threshold, the zxAnIfInBwUsingThreshExceedAlm trap should be generated. If zxAnIfInBandwidthUsingRatio always exceeds the threshold, only one zxAnIfInBwUsingThreshExceedAlm trap should be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

zxAnIfOutBandwidthUsingThresh 1.3.6.1.4.1.3902.1082.30.31.2.30.1.4
The threshold of zxAnIfOutBandwidthUsingRatio. When zxAnIfOutBandwidthUsingRatio exceeds this threshold, the zxAnIfOutBwUsingThreshExceedAlm trap should be generated. If zxAnIfOutBandwidthUsingRatio always exceeds the threshold, only one zxAnIfOutBwUsingThreshExceedAlm trap should be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

zxAnIfInBandwidthUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.30.1.5
The high accuracy value of zxAnIfInBandwidthUsingRatio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnIfOutBandwidthUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.30.1.6
The high accuracy value of zxAnIfOutBandwidthUsingRatio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnIfNumberStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.40
The number of interfaces statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfNumberStatsEntry

zxAnIfNumberStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.40.1
The number of interfaces statistics entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfNumberStatsEntry  

zxAnIfNumberStatsIfType 1.3.6.1.4.1.3902.1082.30.31.2.40.1.1
The interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER adsl(1), vdsl(2), shdsl(3), ethernet(4), igmp(5)  

zxAnIfNumberStatsTotalNumber 1.3.6.1.4.1.3902.1082.30.31.2.40.1.2
The total number of interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnIfNumberStatsOnlineNumber 1.3.6.1.4.1.3902.1082.30.31.2.40.1.3
The total number of online interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnIfVlanCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.50
Interface VLAN statistic table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfVlanCurrStatsEntry

zxAnIfVlanCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.50.1
A zxAnIfVlanCurrStatsTable entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfVlanCurrStatsEntry  

zxAnIfVid 1.3.6.1.4.1.3902.1082.30.31.2.50.1.1
The interface VLAN ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnIfVlanInPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.2
Received packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.3
Transmitted packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.4
Received octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.5
Transmitted octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.6
Received unicast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.7
Transmitted unicast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInUcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.8
Received unicast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutUcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.9
Transmitted unicast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.10
Received multicast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.11
Transmitted multicast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInMcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.12
Received multicast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutMcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.13
Transmitted multicast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.14
Received broadcast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.15
Transmitted broadcast packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInBcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.16
Received broadcast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutBcastOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.17
Transmitted broadcast octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInFloodPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.18
Received flooding packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutFloodPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.19
Transmitted flooding packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInFloodOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.20
Received flooding octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutFloodOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.21
Transmitted flooding octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.22
Received discarded packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutDiscardPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.23
Transmitted discarded packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInDiscardOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.24
Received discarded octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutDiscardOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.25
Transmitted discarded octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInErrorPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.26
Received errored packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutErrorPkts 1.3.6.1.4.1.3902.1082.30.31.2.50.1.27
Transmitted errored packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanInErrorOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.28
Received errored octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanOutErrorOctets 1.3.6.1.4.1.3902.1082.30.31.2.50.1.29
Transmitted errored octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlanCurrStatsReset 1.3.6.1.4.1.3902.1082.30.31.2.50.1.99
Clear all the current performance variables. When get this variable, always return 1. Reset port vlan statistics counter manually when it is set to '1'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnIfVlanCurrStatsRowStatus 1.3.6.1.4.1.3902.1082.30.31.2.50.1.100
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnIfVlanCurrStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnIfVlanRateStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.51
Interface VLAN rate statistic table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfVlanRateStatsEntry

zxAnIfVlanRateStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.51.1
A zxAnIfVlanRateStatsTable entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfVlanRateStatsEntry  

zxAnIfVlanRxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.1
Received packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.2
Transmitted packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.3
Received pakcet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.4
Transmitted packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxUcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.5
Received unicast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxUcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.6
Transmitted unicast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxUcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.7
Transmitted unicast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxUcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.8
Transmitted unicast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxMcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.9
Received multicast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxMcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.10
Transmitted multicast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxMcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.11
Received multicast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxMcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.12
Transmitted multicast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxBcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.13
Received broadcast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxBcastPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.14
Received broadcast packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxBcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.15
Received broadcast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxBcastPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.16
Transmitted broadcast packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxFloodPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.17
Received flooding packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxFloodPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.18
Transmitted flooding packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxFloodPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.19
Received flooding packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxFloodPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.20
Transmitted flooding packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxDiscardPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.21
Received discarded packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxDiscardPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.22
Transmitted discarded packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxDiscardPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.23
Received discarded packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxDiscardPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.24
Transmitted discarded packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxErrorPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.25
Received errored packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxErrorPktRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.26
Transmitted errored packet rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanRxErrorPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.27
Received errored packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlanTxErrorPktPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.51.1.28
Transmitted errored packet peak rate of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnIfVlan2CurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.52
Interface S-VID and C-VID statistic table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfVlan2CurrStatsEntry

zxAnIfVlan2CurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.52.1
Interface SVLAN and CVLAN statistic entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfVlan2CurrStatsEntry  

zxAnIfVlan2CurrStatsSVid 1.3.6.1.4.1.3902.1082.30.31.2.52.1.1
The interface S-VID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnIfVlan2CurrStatsCVid 1.3.6.1.4.1.3902.1082.30.31.2.52.1.2
The interface C-VID. Value 0 means statistics only based on S-VID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

zxAnIfVlan2InPkts 1.3.6.1.4.1.3902.1082.30.31.2.52.1.3
Received packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlan2OutPkts 1.3.6.1.4.1.3902.1082.30.31.2.52.1.4
Transmitted packets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlan2InOctets 1.3.6.1.4.1.3902.1082.30.31.2.52.1.5
Received octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlan2OutOctets 1.3.6.1.4.1.3902.1082.30.31.2.52.1.6
Transmitted octets of the interface VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnIfVlan2CurrStatsReset 1.3.6.1.4.1.3902.1082.30.31.2.52.1.100
Clear all the current performance variables. When get this variable, always return 1. Reset port vlan statistics counter manually when it is set to '1'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnBrgIfCurrPerfStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.60
Enable/disable the bridge interface current performance statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfCurrPerfStatsEntry

zxAnBrgIfCurrPerfStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.60.1
A zxAnBrgIfCurrPerfStatsTable entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfCurrPerfStatsEntry  

zxAnBrgIfCurrPerfStatsRowStatus 1.3.6.1.4.1.3902.1082.30.31.2.60.1.100
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnBrgIfCurrPerfStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnIfVlanCurrPerfStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.61
Enable/disable the interface S-VID and C-VID current performance statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnIfVlanCurrPerfStatsEntry

zxAnIfVlanCurrPerfStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.61.1
A zxAnIfVlanCurrPerfStatsTable entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnIfVlanCurrPerfStatsEntry  

zxAnIfVlanPerfStatsSVid 1.3.6.1.4.1.3902.1082.30.31.2.61.1.1
The interface S-VID.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

zxAnIfVlanPerfStatsCVid 1.3.6.1.4.1.3902.1082.30.31.2.61.1.2
The interface C-VID. Value 0 means statistics only based on S-VID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

zxAnIfVlanPerfStatsRowStatus 1.3.6.1.4.1.3902.1082.30.31.2.61.1.100
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnIfVlanCurrPerfStatsEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnVnd0EthIfCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.62
Current performance data table of shared interfaces of the VND 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVnd0EthIfCurrStatsEntry

zxAnVnd0EthIfCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.62.1
Current performance data entry of shared interfaces of the VND 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVnd0EthIfCurrStatsEntry  

zxAnVnd0EthIfInOctets 1.3.6.1.4.1.3902.1082.30.31.2.62.1.1
The total number of octets received on the shared interface of the VND 0, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.62.1.2
The total number of octets transmitted out on the shared interface of the VND 0, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfInPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.3
The total number of packets received on the shared interface of the VND 0, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfOutPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.4
The total number of packets transmitted out on the shared interface of the VND 0, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.6
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.7
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.9
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.62.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0EthIfRxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.11
An estimate of the received bandwidth in bytes per second on the shared interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfTxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.12
An estimate of the transmitted bandwidth in bytes per second on the shared interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfRxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.13
An estimate of the received bandwidth in packets per second on the shared interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfTxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.14
An estimate of the transmitted bandwidth in packets per second on the shared interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfRxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.15
The peak received bandwidth in bytes per second on the shared interface of the VND 0. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfTxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.62.1.16
The peak transmitted bandwidth in bytes per second on the shared interface of the VND 0. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0EthIfInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.62.1.17
An estimate of the received bandwidth using ratio on the shared interface of the VND 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnVnd0EthIfOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.62.1.18
An estimate of the transmitted bandwidth using ratio on the shared interface of the VND 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnVnd0EthIfInBwUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.62.1.19
The high accuracy value of zxAnVnd0EthIfInBwUsingRatio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnVnd0EthIfOutBwUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.62.1.20
The high accuracy value of zxAnVnd0EthIfOutBwUsingRatio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnVnd0EthIfLinkStatusChanges 1.3.6.1.4.1.3902.1082.30.31.2.62.1.51
The total number of the link status changes on the shared interface of the VND 0. The total number starts from zero and is increased when the link status changes from up to down, or from down to up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxAnVnd0EthIfReset 1.3.6.1.4.1.3902.1082.30.31.2.62.1.100
Clear all the current performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

zxAnVnd0LagIfCurrStatsTable 1.3.6.1.4.1.3902.1082.30.31.2.64
Current performance data table of shared LAG interfaces of the VND 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnVnd0LagIfCurrStatsEntry

zxAnVnd0LagIfCurrStatsEntry 1.3.6.1.4.1.3902.1082.30.31.2.64.1
Current performance data entry of shared LAG interfaces of the VND 0.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnVnd0LagIfCurrStatsEntry  

zxAnVnd0LagIfInOctets 1.3.6.1.4.1.3902.1082.30.31.2.64.1.1
The total number of octets received on the shared LAG interface of the VND 0, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfOutOctets 1.3.6.1.4.1.3902.1082.30.31.2.64.1.2
The total number of octets transmitted out on the shared LAG interface of the VND 0, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfInPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.3
The total number of packets received on the shared LAG interface of the VND 0, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfOutPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.4
The total number of packets transmitted out on the shared LAG interface of the VND 0, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfInUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfOutUcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.6
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfInMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.7
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfOutMcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfInBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.9
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfOutBcastPkts 1.3.6.1.4.1.3902.1082.30.31.2.64.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnVnd0LagIfRxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.11
An estimate of the received bandwidth in bytes per second on the shared LAG interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfTxOctetRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.12
An estimate of the transmitted bandwidth in bytes per second on the shared LAG interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfRxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.13
An estimate of the received bandwidth in packets per second on the shared LAG interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfTxPktRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.14
An estimate of the transmitted bandwidth in packets per second on the shared LAG interface of the VND 0. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfRxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.15
The peak received bandwidth in bytes per second on the shared LAG interface of the VND 0. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfTxOctetPeakRate 1.3.6.1.4.1.3902.1082.30.31.2.64.1.16
The peak transmitted bandwidth in bytes per second on the shared LAG interface of the VND 0. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnVnd0LagIfInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.64.1.17
An estimate of the received bandwidth using ratio on the shared LAG interface of the VND 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnVnd0LagIfOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.31.2.64.1.18
An estimate of the transmitted bandwidth using ratio on the shared LAG interface of the VND 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnVnd0LagIfInBwUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.64.1.19
The high accuracy value of zxAnVnd0LagIfInBwUsingRatio.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnVnd0LagIfOutBwUsingRatioHa 1.3.6.1.4.1.3902.1082.30.31.2.64.1.20
The high accuracy value of zxAnVnd0LagIfOutBwUsingRatio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..10000000  

zxAnVnd0LagIfLinkStatusChanges 1.3.6.1.4.1.3902.1082.30.31.2.64.1.51
The total number of the link status changes on the shared LAG interface of the VND 0. The total number starts from zero and is increased when the link status changes from up to down, or from down to up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxAnVnd0LagIfReset 1.3.6.1.4.1.3902.1082.30.31.2.64.1.100
Clear all the current performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

zxAnIfBwUsingTraps 1.3.6.1.4.1.3902.1082.30.31.3.1
OBJECT IDENTIFIER    

zxAnIfInBwUsingThreshExceedAlm 1.3.6.1.4.1.3902.1082.30.31.3.1.1
It indicates that zxAnIfInBandwidthUsingRatio exceeds the threshold zxAnIfInBandwidthUsingThresh.
Status: current Access: read-write
NOTIFICATION-TYPE    

zxAnIfInBwUsingThreshExceedClr 1.3.6.1.4.1.3902.1082.30.31.3.1.2
It indicates that zxAnIfInBandwidthUsingRatio is below the threshold zxAnIfInBandwidthUsingThresh.
Status: current Access: read-write
NOTIFICATION-TYPE    

zxAnIfOutBwUsingThreshExceedAlm 1.3.6.1.4.1.3902.1082.30.31.3.1.3
It indicates that zxAnIfOutBandwidthUsingRatio exceeds the threshold zxAnIfOutBandwidthUsingThresh.
Status: current Access: read-write
NOTIFICATION-TYPE    

zxAnIfOutBwUsingThreshExceedClr 1.3.6.1.4.1.3902.1082.30.31.3.1.4
It indicates that zxAnIfOutBandwidthUsingRatio is below the threshold zxAnIfOutBandwidthUsingThresh.
Status: current Access: read-write
NOTIFICATION-TYPE    

zxAnIfeEthPerfCompliance 1.3.6.1.4.1.3902.1082.30.31.4.1.1
The compliance statement for entities which implement the ZTE-AN-INTERFACE-PERF-MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

zxAnEthIfPerfCurrGroup 1.3.6.1.4.1.3902.1082.30.31.4.2.1
A collection of objects providing current performance data of interfaces.
Status: current Access: read-write
OBJECT-GROUP    

zxAnIfBrgPerfCompliance 1.3.6.1.4.1.3902.1082.30.31.4.1.2
The compliance statement for entities which implement the ZTE-AN-INTERFACE-PERF-MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

zxAnBrgIfPerfCurrGroup 1.3.6.1.4.1.3902.1082.30.31.4.2.2
A collection of objects providing current performance data of interfaces.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor