ZTE-AN-INTERFACE-BRG-PERF-MIB

File: ZTE-AN-INTERFACE-BRG-PERF-MIB.mib (62850 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB ZTE-AN-SMI HC-PerfHist-TC-MIB
ZTE-AN-IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Gauge32 Counter64
RowStatus DisplayString TruthValue
TEXTUAL-CONVENTION DateAndTime MODULE-COMPLIANCE
OBJECT-GROUP ifIndex zxAnInterface
HCPerfCurrentCount zxAnSubIfIndex

Defined Types

ZxAnBrgIfCurr15MinPerfEntry  
SEQUENCE    
  zxAnBrgIfC15MTimeElapsed Gauge32
  zxAnBrgIfC15MInOctets Counter64
  zxAnBrgIfC15MInUcastPkts Counter64
  zxAnBrgIfC15MInMcastPkts Counter64
  zxAnBrgIfC15MInBcastPkts Counter64
  zxAnBrgIfC15MOutOctets Counter64
  zxAnBrgIfC15MOutUcastPkts Counter64
  zxAnBrgIfC15MOutMcastPkts Counter64
  zxAnBrgIfC15MOutBcastPkts Counter64
  zxAnBrgIfC15MInErroredPktRate Gauge32
  zxAnBrgIfC15MInBwUsingRatio Integer32
  zxAnBrgIfC15MOutBwUsingRatio Integer32
  zxAnBrgIfC15MReset INTEGER

ZxAnBrgIfCurr1DayPerfEntry  
SEQUENCE    
  zxAnBrgIfC1DTimeElapsed Gauge32
  zxAnBrgIfC1DInOctets Counter64
  zxAnBrgIfC1DInUcastPkts Counter64
  zxAnBrgIfC1DInMcastPkts Counter64
  zxAnBrgIfC1DInBcastPkts Counter64
  zxAnBrgIfC1DOutOctets Counter64
  zxAnBrgIfC1DOutUcastPkts Counter64
  zxAnBrgIfC1DOutMcastPkts Counter64
  zxAnBrgIfC1DOutBcastPkts Counter64
  zxAnBrgIfC1DInErroredPktRate Gauge32
  zxAnBrgIfC1DInBwUsingRatio Integer32
  zxAnBrgIfC1DOutBwUsingRatio Integer32
  zxAnBrgIfC1DReset INTEGER

ZxAnBrgIfHis15MinPerfEntry  
SEQUENCE    
  zxAnBrgIfH15MIntervalNo Integer32
  zxAnBrgIfH15MIntervalValidData TruthValue
  zxAnBrgIfH15MDateTime DateAndTime
  zxAnBrgIfH15MInOctets Counter64
  zxAnBrgIfH15MInUcastPkts Counter64
  zxAnBrgIfH15MInMcastPkts Counter64
  zxAnBrgIfH15MInBcastPkts Counter64
  zxAnBrgIfH15MOutOctets Counter64
  zxAnBrgIfH15MOutUcastPkts Counter64
  zxAnBrgIfH15MOutMcastPkts Counter64
  zxAnBrgIfH15MOutBcastPkts Counter64
  zxAnBrgIfH15MInErroredPktRate Gauge32
  zxAnBrgIfH15MInBwUsingRatio Integer32
  zxAnBrgIfH15MOutBwUsingRatio Integer32

ZxAnBrgIfHis1DayPerfEntry  
SEQUENCE    
  zxAnBrgIfH1DIntervalNo Integer32
  zxAnBrgIfH1DIntervalValidData TruthValue
  zxAnBrgIfH1DDateTime DateAndTime
  zxAnBrgIfH1DInOctets Counter64
  zxAnBrgIfH1DInUcastPkts Counter64
  zxAnBrgIfH1DInMcastPkts Counter64
  zxAnBrgIfH1DInBcastPkts Counter64
  zxAnBrgIfH1DOutOctets Counter64
  zxAnBrgIfH1DOutUcastPkts Counter64
  zxAnBrgIfH1DOutMcastPkts Counter64
  zxAnBrgIfH1DOutBcastPkts Counter64
  zxAnBrgIfH1DInErroredPktRate Gauge32
  zxAnBrgIfH1DInBwUsingRatio Integer32
  zxAnBrgIfH1DOutBwUsingRatio Integer32

ZxAnBrgIfAlmProfileConfEntry  
SEQUENCE    
  zxAnBrgIfAlmProfileName DisplayString
  zxAnBrgIfPerfVariable OBJECT IDENTIFIER
  zxAnBrgIfRiseAlmThresh HCPerfCurrentCount
  zxAnBrgIfClrRiseAlmThresh HCPerfCurrentCount
  zxAnBrgIfRiseWarnThresh HCPerfCurrentCount
  zxAnBrgIfClrRiseWarnThresh HCPerfCurrentCount
  zxAnBrgIfFallWarnThresh HCPerfCurrentCount
  zxAnBrgIfClrFallWarnThresh HCPerfCurrentCount
  zxAnBrgIfFallAlmThresh HCPerfCurrentCount
  zxAnBrgIfClrFallAlmThresh HCPerfCurrentCount
  zxAnBrgIfThreshUsed BITS
  zxAnBrgIfAlmProfileConfRowStatus RowStatus

ZxAnBrgIfAlmProfileApplyEntry  
SEQUENCE    
  zxAnBrgIfAlmPrf DisplayString
  zxAnBrgIfAlmPrfApplyRowStatus RowStatus

ZxAnBrgIfAlmProfileEntry  
SEQUENCE    
  zxAnBrgIfAlmProfileRowStatus RowStatus

ZxAnBrgIfCurrMinPerfEntry  
SEQUENCE    
  zxAnBrgIfCMinTimeElapsed Gauge32
  zxAnBrgIfCMinInOctets Counter64
  zxAnBrgIfCMinInUcastPkts Counter64
  zxAnBrgIfCMinInMcastPkts Counter64
  zxAnBrgIfCMinInBcastPkts Counter64
  zxAnBrgIfCMinOutOctets Counter64
  zxAnBrgIfCMinOutUcastPkts Counter64
  zxAnBrgIfCMinOutMcastPkts Counter64
  zxAnBrgIfCMinOutBcastPkts Counter64
  zxAnBrgIfCMinInErroredPktRate Gauge32
  zxAnBrgIfCMinInBwUsingRatio Integer32
  zxAnBrgIfCMinOutBwUsingRatio Integer32
  zxAnBrgIfCMinReset INTEGER

ZxAnBrgIfHisMinPerfEntry  
SEQUENCE    
  zxAnBrgIfHMinIntervalNo Integer32
  zxAnBrgIfHMinIntervalValidData TruthValue
  zxAnBrgIfHMinDateTime DateAndTime
  zxAnBrgIfHMinInOctets Counter64
  zxAnBrgIfHMinInUcastPkts Counter64
  zxAnBrgIfHMinInMcastPkts Counter64
  zxAnBrgIfHMinInBcastPkts Counter64
  zxAnBrgIfHMinOutOctets Counter64
  zxAnBrgIfHMinOutUcastPkts Counter64
  zxAnBrgIfHMinOutMcastPkts Counter64
  zxAnBrgIfHMinOutBcastPkts Counter64
  zxAnBrgIfHMinInErroredPktRate Gauge32
  zxAnBrgIfHMinInBwUsingRatio Integer32
  zxAnBrgIfHMinOutBwUsingRatio Integer32

Defined Values

zxAnInterfaceBrgPerfMib 1.3.6.1.4.1.3902.1082.30.33
The MIB module for the Performance Management of ZTE Access Node interface.
MODULE-IDENTITY    

zxAnBrgIfPerfObjects 1.3.6.1.4.1.3902.1082.30.33.2
OBJECT IDENTIFIER    

zxAnBrgIfCurr15MinPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.2
The 15 minutes interval performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfCurr15MinPerfEntry

zxAnBrgIfCurr15MinPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.2.1
The 15 minutes interval performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfCurr15MinPerfEntry  

zxAnBrgIfC15MTimeElapsed 1.3.6.1.4.1.3902.1082.30.33.2.2.1.1
Number of seconds that have elapsed since the beginning of the current 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..899  

zxAnBrgIfC15MInOctets 1.3.6.1.4.1.3902.1082.30.33.2.2.1.2
The total number of octets received on the interface, including framing characters in current 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.3
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in current 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.2.1.6
The total number of octets transmitted out of the interface, including framing characters in curent 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.7
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current 15 minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.2.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in 15 current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC15MInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.2.1.50
The received errored packet rate in current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfC15MInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.2.1.52
An estimate of the interface's current received bandwidth using ratio in current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfC15MOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.2.1.53
An estimate of the interface's current transmitted bandwidth using ratio in current 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfC15MReset 1.3.6.1.4.1.3902.1082.30.33.2.2.1.100
Clear all the current 15 minutes performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnBrgIfCurr1DayPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.3
The 1 day interval performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfCurr1DayPerfEntry

zxAnBrgIfCurr1DayPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.3.1
The 1 day interval performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfCurr1DayPerfEntry  

zxAnBrgIfC1DTimeElapsed 1.3.6.1.4.1.3902.1082.30.33.2.3.1.1
Number of seconds that have elapsed since the beginning of the current 1 day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..86399  

zxAnBrgIfC1DInOctets 1.3.6.1.4.1.3902.1082.30.33.2.3.1.2
The total number of octets received on the interface, including framing characters in current one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.3
The total number of octets received on the interface, including framing characters in current one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.3.1.6
The total number of octets transmitted out of the interface, including framing characters in curent one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.7
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.3.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfC1DInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.3.1.50
The received errored packet rate in current one day.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfC1DInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.3.1.52
An estimate of the interface's received bandwidth using ratio in current one day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfC1DOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.3.1.53
An estimate of the interface's transmitted bandwidth using ratio in current one day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfC1DReset 1.3.6.1.4.1.3902.1082.30.33.2.3.1.100
Clear all the current 1 day performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnBrgIfHis15MinPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.4
The 15 minutes interval history performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfHis15MinPerfEntry

zxAnBrgIfHis15MinPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.4.1
The 15 minutes interval performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfHis15MinPerfEntry  

zxAnBrgIfH15MIntervalNo 1.3.6.1.4.1.3902.1082.30.33.2.4.1.1
Performance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

zxAnBrgIfH15MIntervalValidData 1.3.6.1.4.1.3902.1082.30.33.2.4.1.2
Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

zxAnBrgIfH15MDateTime 1.3.6.1.4.1.3902.1082.30.33.2.4.1.3
The 15 minutes interval performance data generation time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnBrgIfH15MInOctets 1.3.6.1.4.1.3902.1082.30.33.2.4.1.4
The total number of octets received on the interface, including framing characters in current 15 historical interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in historical 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.6
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical 15 minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.7
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.4.1.8
The total number of octets transmitted out of the interface, including framing characters in historical 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical 15 minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical 15 minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.4.1.11
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in 15 historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH15MInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.4.1.50
The received errored packet rate in historical 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfH15MInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.4.1.52
An estimate of the interface's received bandwidth using ratio in historical 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfH15MOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.4.1.53
An estimate of the interface's transmitted bandwidth using ratio in historical 15 minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfHis1DayPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.5
The 1 day interval history performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfHis1DayPerfEntry

zxAnBrgIfHis1DayPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.5.1
The 1 day interval performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfHis1DayPerfEntry  

zxAnBrgIfH1DIntervalNo 1.3.6.1.4.1.3902.1082.30.33.2.5.1.1
Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..7  

zxAnBrgIfH1DIntervalValidData 1.3.6.1.4.1.3902.1082.30.33.2.5.1.2
Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

zxAnBrgIfH1DDateTime 1.3.6.1.4.1.3902.1082.30.33.2.5.1.3
The 1 day interval performance data generation time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnBrgIfH1DInOctets 1.3.6.1.4.1.3902.1082.30.33.2.5.1.4
The total number of octets received on the interface, including framing characters in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.5
The total number of octets received on the interface, including framing characters in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.6
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.7
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.5.1.8
The total number of octets transmitted out of the interface, including framing characters in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical one day interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.5.1.11
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical one day interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfH1DInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.5.1.50
The received errored packet rate in historical one day.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfH1DInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.5.1.52
An estimate of the interface's received bandwidth using ratio in historical one day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfH1DOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.5.1.53
An estimate of the interface's transmitted bandwidth using ratio in historical one day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfAlmProfileConfTable 1.3.6.1.4.1.3902.1082.30.33.2.6
The performance alarm threshold profile table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfAlmProfileConfEntry

zxAnBrgIfAlmProfileConfEntry 1.3.6.1.4.1.3902.1082.30.33.2.6.1
The performance alarm threshold profile table of the bridge interfaces.These variables in the profile configuration is optional,if not configured, it means the correspongding alarm is not reported, but the alarm and clear alarm threshold configuration is needed to bind.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfAlmProfileConfEntry  

zxAnBrgIfAlmProfileName 1.3.6.1.4.1.3902.1082.30.33.2.6.1.1
The profile name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnBrgIfPerfVariable 1.3.6.1.4.1.3902.1082.30.33.2.6.1.2
The object identifier of performance variables.
Status: current Access: not-accessible
OBJECT-TYPE    
  OBJECT IDENTIFIER  

zxAnBrgIfRiseAlmThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.3
The threshold for rising alarm.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfClrRiseAlmThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.4
The threshold for rising alarm restore.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfRiseWarnThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.5
The threshold for rising warning.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfClrRiseWarnThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.6
The threshold for rising warning restore.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfFallWarnThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.7
The threshold for falling warning.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfClrFallWarnThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.8
The threshold for falling warning restore.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfFallAlmThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.9
The threshold for falling alarm.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfClrFallAlmThresh 1.3.6.1.4.1.3902.1082.30.33.2.6.1.10
The threshold for falling alarm restore.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfCurrentCount  

zxAnBrgIfThreshUsed 1.3.6.1.4.1.3902.1082.30.33.2.6.1.11
The threshold used flag.
Status: current Access: read-create
OBJECT-TYPE    
  BITS riseAlmThresh(0), riseAlmClrThresh(1), riseWarnThresh(2), riseWarnClrThresh(3), fallWarnThresh(4), fallWarnClrThresh(5), fallAlmThresh(6), fallAlmClrThresh(7)  

zxAnBrgIfAlmProfileConfRowStatus 1.3.6.1.4.1.3902.1082.30.33.2.6.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnBrgIfAlmProfileApplyTable 1.3.6.1.4.1.3902.1082.30.33.2.7
The performance alarm threshold profile configuration table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfAlmProfileApplyEntry

zxAnBrgIfAlmProfileApplyEntry 1.3.6.1.4.1.3902.1082.30.33.2.7.1
The performance alarm threshold profile configuration entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfAlmProfileApplyEntry  

zxAnBrgIfAlmPrf 1.3.6.1.4.1.3902.1082.30.33.2.7.1.1
The performance alarm threshold profile.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnBrgIfAlmPrfApplyRowStatus 1.3.6.1.4.1.3902.1082.30.33.2.7.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnBrgIfAlmProfileTable 1.3.6.1.4.1.3902.1082.30.33.2.8
The performance alarm threshold profile table of the bridge interfaces. It can be used to delete all of the performance alarm threshold profiles which has the same name configured in 'zxAnBrgIfAlmProfileConfTable'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfAlmProfileEntry

zxAnBrgIfAlmProfileEntry 1.3.6.1.4.1.3902.1082.30.33.2.8.1
The performance alarm threshold profile entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfAlmProfileEntry  

zxAnBrgIfAlmProfileRowStatus 1.3.6.1.4.1.3902.1082.30.33.2.8.1.50
The status of this conceptual row. To create a profile in this table, a manager must set this object to createAndGo(4). To delete a profile in this table, a manager must set this object to destroy(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxAnBrgIfCurrMinPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.9
The minutes interval performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfCurrMinPerfEntry

zxAnBrgIfCurrMinPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.9.1
The minutes interval performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfCurrMinPerfEntry  

zxAnBrgIfCMinTimeElapsed 1.3.6.1.4.1.3902.1082.30.33.2.9.1.1
Number of seconds that have elapsed since the beginning of the current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfCMinInOctets 1.3.6.1.4.1.3902.1082.30.33.2.9.1.2
The total number of octets received on the interface, including framing characters in current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.3
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.4
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in current minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.9.1.6
The total number of octets transmitted out of the interface, including framing characters in curent minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.7
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.8
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in current minutes interval. For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.9.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in current minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfCMinInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.9.1.50
The received errored packet rate in current minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfCMinInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.9.1.52
An estimate of the interface's current received bandwidth using ratio in current minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfCMinOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.9.1.53
An estimate of the interface's current transmitted bandwidth using ratio in current minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfCMinReset 1.3.6.1.4.1.3902.1082.30.33.2.9.1.100
Clear all the current minutes performance variables. When get this variable, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER perfReset(1)  

zxAnBrgIfHisMinPerfTable 1.3.6.1.4.1.3902.1082.30.33.2.10
The minutes interval history performance data table of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnBrgIfHisMinPerfEntry

zxAnBrgIfHisMinPerfEntry 1.3.6.1.4.1.3902.1082.30.33.2.10.1
The minutes interval history performance data entry of the bridge interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnBrgIfHisMinPerfEntry  

zxAnBrgIfHMinIntervalNo 1.3.6.1.4.1.3902.1082.30.33.2.10.1.1
Performance data interval number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnBrgIfHMinIntervalValidData 1.3.6.1.4.1.3902.1082.30.33.2.10.1.2
Performance data valid flag. true(1) means valid. false(2) means invalidm and the performace data is useless.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

zxAnBrgIfHMinDateTime 1.3.6.1.4.1.3902.1082.30.33.2.10.1.3
The minutes interval performance data generation time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnBrgIfHMinInOctets 1.3.6.1.4.1.3902.1082.30.33.2.10.1.4
The total number of octets received on the interface, including framing characters in current historical interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinInUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.5
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer and in historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinInMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.6
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer and in historical minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinInBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.7
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer and in historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinOutOctets 1.3.6.1.4.1.3902.1082.30.33.2.10.1.8
The total number of octets transmitted out of the interface, including framing characters in historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinOutUcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.9
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent in historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinOutMcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.10
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent and in historical minutes interval.For a MAC layer protocol, this includes both Group and Functional addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinOutBcastPkts 1.3.6.1.4.1.3902.1082.30.33.2.10.1.11
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent in historical minutes interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxAnBrgIfHMinInErroredPktRate 1.3.6.1.4.1.3902.1082.30.33.2.10.1.50
The received errored packet rate in historical minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

zxAnBrgIfHMinInBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.10.1.52
An estimate of the interface's received bandwidth using ratio in historical minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfHMinOutBwUsingRatio 1.3.6.1.4.1.3902.1082.30.33.2.10.1.53
An estimate of the interface's transmitted bandwidth using ratio in historical minutes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnBrgIfPerfConformance 1.3.6.1.4.1.3902.1082.30.33.4
OBJECT IDENTIFIER    

zxAnBrgIfPerfCompliances 1.3.6.1.4.1.3902.1082.30.33.4.1
OBJECT IDENTIFIER    

zxAnBrgIfPerfGroups 1.3.6.1.4.1.3902.1082.30.33.4.2
OBJECT IDENTIFIER    

zxAnBrgIfPerfCompliance 1.3.6.1.4.1.3902.1082.30.33.4.1.1
The compliance statement for entities which implement the ZTE-AN-INTERFACE-BRG-PERF-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

zxAnBrgIfPerfCurr15MinGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.1
A collection of objects providing for 15 minutes interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfCurr1DayGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.2
A collection of objects providing 1 day interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfHis15MinGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.3
A collection of objects providing for 15 minutes interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfHis1DayGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.4
A collection of objects providing 1 day interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfAlmProfileGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.5
A collection of objects providing for performance alarm threshold profile of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfAlmProfileApplyGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.6
A collection of objects providing for performance alarm threshold profile apply control configuration information.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfAlmProfileGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.7
A collection of objects providing for performance alarm threshold profile configuration information.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfCurrMinGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.8
A collection of objects providing for minutes interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

zxAnBrgIfPerfHisMinGroup 1.3.6.1.4.1.3902.1082.30.33.4.2.9
A collection of objects providing for minutes interval performance data of interfaces.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor