ZTE-AN-IEEE1588-MIB

File: ZTE-AN-IEEE1588-MIB.mib (91459 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	INET-ADDRESS-MIB
SNMPv2-CONF	ZTE-AN-SMI	ZTE-AN-TC-MIB
IF-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Counter32	RowStatus	TruthValue
DisplayString	MacAddress	InetAddress
InetAddressType	InetAddressPrefixLength	OBJECT-GROUP
NOTIFICATION-TYPE	MODULE-COMPLIANCE	zxAnClockSync
VlanId	ifIndex

Defined Types

ZxAnPtpIfConfEntry
SEQUENCE
	zxAnPtpIfConfClockId	OCTET STRING
	zxAnPtpIfConfNumber	Integer32
	zxAnPtpIfConfState	INTEGER
	zxAnPtpIfConfMinDelayReqInterval	INTEGER
	zxAnPtpIfConfAnnounceInterval	Integer32
	zxAnPtpIfConfMaxLossAnnounceMsgs	Integer32
	zxAnPtpIfConfSyncInterval	INTEGER
	zxAnPtpIfConfLocalPriority	Integer32
	zxAnPtpIfConfPtpMsgProtocolType	INTEGER
	zxAnPtpIfConfAddressType	INTEGER
	zxAnPtpIfConfMsgForwardOption	INTEGER
	zxAnPtpIfConfDelayCompensation	Integer32
	zxAnPtpIfConfAdminStatus	INTEGER
	zxAnPtpIfConfRowStatus	RowStatus

ZxAnPtpPrfEntry
SEQUENCE
	zxAnPtpPrfName	DisplayString
	zxAnPtpPrfPriority2	Integer32
	zxAnPtpPrfDomainNumber	Integer32
	zxAnPtpPrfLocalPriority	Integer32
	zxAnPtpPrfMaxStepsRemoved	Integer32
	zxAnPtpPrfBmcaOption	INTEGER
	zxAnPtpPrfTraceOption	INTEGER
	zxAnPtpPrfHoldoverInTimeout	INTEGER
	zxAnPtpPrfRowStatus	RowStatus

ZxAnPtpIfStatsEntry
SEQUENCE
	zxAnPtpIfStatsAnnounceMsgs	Counter32
	zxAnPtpIfStatsSyncMsgs	Counter32
	zxAnPtpIfStatsDelayReqMsgs	Counter32
	zxAnPtpIfStatsDelayRespMsgs	Counter32
	zxAnPtpIfStatsFollowUpMsgs	Counter32

ZxAnSyncTime1ppsSrcEntry
SEQUENCE
	zxAnSyncTime1ppsSrcId	Integer32
	zxAnSyncTime1ppsSrcRack	Integer32
	zxAnSyncTime1ppsSrcShelf	Integer32
	zxAnSyncTime1ppsSrcSlot	Integer32
	zxAnSyncTime1ppsSrcFirstPtp	TruthValue
	zxAnSyncTime1ppsSrcSignalType	INTEGER
	zxAnSyncTime1ppsSrcPriority	Integer32
	zxAnSyncTime1ppsSrcPortType	INTEGER
	zxAnSyncTime1ppsSrcPort	Integer32
	zxAnSyncTime1ppsSrcWorkStatus	INTEGER
	zxAnSyncTime1ppsSrcValidStatus	INTEGER
	zxAnSyncTime1ppsSrcPortStatus	INTEGER
	zxAnSyncTime1ppsSrcFormat	INTEGER
	zxAnSyncTime1ppsSrcCurrentQL	INTEGER
	zxAnSyncTime1ppsSrcTimeAccuracy	Integer32
	zxAnSyncTime1ppsSrcTimeSrcType	INTEGER
	zxAnSyncTime1ppsSrcDlyCompensate	Integer32
	zxAnSyncTime1ppsSrcRowStatus	RowStatus

ZxAnSyncTimeTodSrcEntry
SEQUENCE
	zxAnSyncTimeTodSrcId	Integer32
	zxAnSyncTimeTodSrcRack	Integer32
	zxAnSyncTimeTodSrcShelf	Integer32
	zxAnSyncTimeTodSrcSlot	Integer32
	zxAnSyncTimeTodSrcPort	Integer32
	zxAnSyncTimeTodSrcSignalType	INTEGER
	zxAnSyncTimeTodSrcYearAdjust	Integer32
	zxAnSyncTimeTodSrcPortStatus	INTEGER
	zxAnSyncTimeTodSrcRowStatus	RowStatus

ZxAnSyncTimeOutputPortEntry
SEQUENCE
	zxAnSyncTimeOutputId	Integer32
	zxAnSyncTimeOutputRack	Integer32
	zxAnSyncTimeOutputShelf	Integer32
	zxAnSyncTimeOutputSlot	Integer32
	zxAnSyncTimeOutputPort	Integer32
	zxAnSyncTimeOutputPortEnable	INTEGER
	zxAnSyncTimeOutputPortPhaseAdjus	Integer32
	zxAnSyncTimeOutputPortRowStatus	RowStatus

Defined Values

zxAnIeee1588Mib		1.3.6.1.4.1.3902.1082.120.15
The MIB module for the management of IEEE1588 .
MODULE-IDENTITY

zxAnIeee1588GlobalObjects		1.3.6.1.4.1.3902.1082.120.15.1
OBJECT IDENTIFIER

zxAnIeee1588Objects		1.3.6.1.4.1.3902.1082.120.15.2
OBJECT IDENTIFIER

zxAnIeee1588Notifications		1.3.6.1.4.1.3902.1082.120.15.3
OBJECT IDENTIFIER

zxAnIeee1588AlmThreshObjects		1.3.6.1.4.1.3902.1082.120.15.1.11
OBJECT IDENTIFIER

zxAnIeee1588TimeStatusInfoObjs		1.3.6.1.4.1.3902.1082.120.15.1.12
OBJECT IDENTIFIER

zxAnIeee1588TimeStatusConfObjs		1.3.6.1.4.1.3902.1082.120.15.1.13
OBJECT IDENTIFIER

zxAnIeee1588PtpObjects		1.3.6.1.4.1.3902.1082.120.15.2.1
OBJECT IDENTIFIER

zxAnIeee15881ppsObjects		1.3.6.1.4.1.3902.1082.120.15.2.2
OBJECT IDENTIFIER

zxAnIeee1588PtpGlobalObjects		1.3.6.1.4.1.3902.1082.120.15.2.1.1
OBJECT IDENTIFIER

zxAnPtpMasterObjects		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1
OBJECT IDENTIFIER

zxAnPtpProfileObjects		1.3.6.1.4.1.3902.1082.120.15.2.1.20
OBJECT IDENTIFIER

zxAnPtpStatsObjects		1.3.6.1.4.1.3902.1082.120.15.2.1.25
OBJECT IDENTIFIER

zxAnPtpProfileGlobalObjects		1.3.6.1.4.1.3902.1082.120.15.2.1.20.1
OBJECT IDENTIFIER

zxAnIeee1588GlobalTraps		1.3.6.1.4.1.3902.1082.120.15.3.1
OBJECT IDENTIFIER

zxAnIeee1588PtpTraps		1.3.6.1.4.1.3902.1082.120.15.3.2
OBJECT IDENTIFIER

zxAnIeee15881ppsTraps		1.3.6.1.4.1.3902.1082.120.15.3.3
OBJECT IDENTIFIER

zxAnIeee1588Capabilities		1.3.6.1.4.1.3902.1082.120.15.1.1
The IEEE1588 capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means the following changes, adding zxAnPtpRemoteSrcPriority to the zxAnPtpRemoteSrcTable, adding zxAn1588LocalUtcTime to the zxAnIeee1588TimeStatusInfoObjs, adding zxAnPtpProtocolIpAddrPfxLen, zxAnPtpProtocolGatewayIpAddrType and zxAnPtpProtocolGatewayIpAddress to the zxAnPtpTable, adding zxAnSyncTime1ppsSrcFormat, zxAnSyncTime1ppsSrcCurrentQL, zxAnSyncTime1ppsSrcTimeAccuracy and zxAnSyncTime1ppsSrcTimeSrcType to the zxAnSyncTime1ppsSrcTable. bit 1: value 1 means the following changes, adding zxAnSyncTime1ppsSrcDlyCompensate to the zxAnSyncTime1ppsSrcTable. NOTE: No recommended to display it in NMS.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	from201602To201603(0), add1ppsSrcDelayCompensation(1)

zxAn1588FreqQLThresh		1.3.6.1.4.1.3902.1082.120.15.1.11.1
System frequency quality level threshold. A zxAnAccuracyDegradedAlm alarm will be generated when system frequency quality level is below the following threshold. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	qlprc(2), qlssua(4), qlssub(8), qlsec(11)

zxAnPtpClockTraceClassThresh		1.3.6.1.4.1.3902.1082.120.15.1.11.2
PTP clock traceability class threshold. A zxAnPtpClockTCBelowThreshAlm alarm will be generated when PTP traceability clock class is below threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

zxAn1ppsInputSignalQLThresh		1.3.6.1.4.1.3902.1082.120.15.1.11.3
1PPS input signal quality level threshold. A zxAn1ppsInSignalQlBelowThreshAlm alarm will be generated when 1PPS input signal quality level of '1PPS+ToD' port is below the following threshold. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. 1PPS input signal is in holdover state at this time by using PRC. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. 1PPS input signal is in holdover state at this time by using SSU-A. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. 1PPS input signal is in holdover state at this time by using SSU-B. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813. 1PPS input signal is in holdover state at this time by using SEC.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	locked(1), qlprc(2), qlssua(4), qlssub(8), qlsec(11)

zxAn1588TimeAccuracyDegradAlmRsn		1.3.6.1.4.1.3902.1082.120.15.1.12.1
The time accuracy degraded alarm reason. A zxAn1588TimeAccuracyDegradeAlm alarm will be generated because for the following threshold. freqLol(1): frequency loss of lock. freqQualityLevelBelowThresh(2): frequency quality level below threshold.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	freqLol(1), freqQualityLevelBelowThresh(2)

zxAn1588TimeSourceType		1.3.6.1.4.1.3902.1082.120.15.1.12.2
The current time source type. none(1): no time source. ptp(2): PTP time source. oneppsPlusTod: 1PPS+ToD time source.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), ptp(2), oneppsPlusTod(3)

zxAn1588TimeSourceId		1.3.6.1.4.1.3902.1082.120.15.1.12.3
The current time source identification. It indicates the PTP time source ID when zxAn1588TimeSourceType is ptp(1). It indicates the 1PPS+ToD time source ID when zxAn1588TimeSourceType is oneppsPlusTod(2). If zxAn1588TimeSourceType is none(1), the attribute value is empty string.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..23)

zxAn1588LocalTimeStatus		1.3.6.1.4.1.3902.1082.120.15.1.12.4
The local time status. freeRun(1): the local time has never been synchronized with any time source. synchronizing(2): the local time is synchronizing with a time source. locked(3): the local time has been synchronized with a time source. holdoverInspecification(4): the local time is no longer synchronized with a time source and is using information obtained while it was previously synchronized or other information sources were still available, to maintain performance within desired specification. It is defined in recommendation G.8275.1 appendix V. holdoverOutOfSpecification(5): the local time is no longer synchronized with a time source and, while it may be using information obtained while it was previously synchronized or other information sources were still available, it is unable to maintain performance within desired specification. It is defined in recommendation G.8275.1 appendix V. holdover(6): the local time is no longer synchronized with a time source, this value is only used for zxAn1588LocalTimeStatusChanged trap.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	freeRun(1), synchronizing(2), locked(3), holdoverInSpecification(4), holdoverOutOfSpecification(5), holdover(6)

zxAn1588LocalClockFreqStatus		1.3.6.1.4.1.3902.1082.120.15.1.12.5
The local clock frequency status. freerun(1): the local clock frequency is in free-run state. locked(2): the local clock frequency is in locked state. holdover(3): the local clock frequency is in holdover state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	freeRun(1), locked(2), holdover(3)

zxAn1588LocalClockFreqQltyLvl		1.3.6.1.4.1.3902.1082.120.15.1.12.6
The local clock frequency quality level. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. 1PPS input signal is in holdover state at this time by using PRC. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	qlprc(2), qlssua(4), qlssub(8), qlsec(11)

zxAn1588PtpMessageReceiveStatus		1.3.6.1.4.1.3902.1082.120.15.1.12.7
The PTP message receiving status. normal(1): the PTP message receiving status is normal. annocMessageMissed(2): the PTP announcement message is missed. syncMessageMissed(3): the PTP synchronization message is missed. annocAndSyncMessagesMissed(4): the PTP announcement and synchronization messages are all missed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), annocMessageMissed(2), syncMessageMissed(3), annocAndSyncMessagesMissed(4)

zxAn1588LastTimeSourceType		1.3.6.1.4.1.3902.1082.120.15.1.12.8
The last time source type. none(1): no time source. ptp(2): PTP time source. oneppsPlusTod: 1PPS+ToD time source.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), ptp(2), oneppsPlusTod(3)

zxAn1588LastTimeSourceId		1.3.6.1.4.1.3902.1082.120.15.1.12.9
The last time source identification. It indicates the PTP time source ID when zxAn1588TimeSourceType is ptp(1). It indicates the 1PPS+ToD time source ID when zxAn1588TimeSourceType is oneppsPlusTod(2). If zxAn1588TimeSourceType is none(1), the attribute value is empty string.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..23)

zxAn1588LocalUtcTime		1.3.6.1.4.1.3902.1082.120.15.1.12.10
The UTC time of Local clock. The format is yyyy-mm-dd HH:MM:SS.For example, 2001-01-01 02:22:33.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..19)

zxAn1588LastLocalTimeStatus		1.3.6.1.4.1.3902.1082.120.15.1.12.11
The last local time status. freeRun(1): the local time has never been synchronized with any time source. synchronizing(2): the local time is synchronizing with a time source. locked(3): the local time has been synchronized with a time source. holdoverInspecification(4): the local time is no longer synchronized with a time source and is using information obtained while it was previously synchronized or other information sources were still available, to maintain performance within desired specification. It is defined in recommendation G.8275.1 appendix V. holdoverOutOfSpecification(5): the local time is no longer synchronized with a time source and, while it may be using information obtained while it was previously synchronized or other information sources were still available, it is unable to maintain performance within desired specification. It is defined in recommendation G.8275.1 appendix V. holdover(6): the local time is no longer synchronized with a time source, this value is only used for zxAn1588LocalTimeStatusChanged trap.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	freeRun(1), synchronizing(2), locked(3), holdoverInSpecification(4), holdoverOutOfSpecification(5), holdover(6)

zxAnIeee1588TimeStatusDftPri1		1.3.6.1.4.1.3902.1082.120.15.1.13.1
The default value of priority 1 delivered to PTP master. This value will be used when OLT is in holdover state.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

zxAnIeee1588TimeStatusDftPri2		1.3.6.1.4.1.3902.1082.120.15.1.13.2
The default value of priority 2 delivered to PTP master, This value will be used when OLT is in holdover state.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

zxAnIeee1588TimeStatusDftClkCls		1.3.6.1.4.1.3902.1082.120.15.1.13.3
The default value of clock class delivered to PTP master, This value will be used when OLT is in holdover state.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstDomainId		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.1
The domain identification of the master. It is a logic number and the range is from 0 to 255, the value 0 indicates the default domain.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstIsLeap59		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.2
In PTP systems whose epoch is the PTP epoch, the value 'yes' indicates that the last minute of the current UTC day contains 59 seconds, the value 'no' indicates that the last minute of the current UTC day does not contain 59 seconds or the epoch is not PTP epoch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstIsLeap61		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.3
In PTP systems whose epoch is the PTP epoch, the value 'yes' indicates that the last minute of the current UTC day contains 61 seconds, the value 'no' indicates that the last minute of the current UTC day does not contain 61 seconds or the epoch is not PTP epoch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstIsTimeTraceable		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.4
The value 'yes' indicates that the current UTC offset can be traced to a primary reference and 'no' otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstIsFreqTraceable		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.5
The value 'yes' indicates that the time frequency can be traced to a primary reference and 'no' otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstIsUtcOffsetValid		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.6
The value 'yes' indicates that the current UTC offset is known to be valid and 'no' otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstCurrentUtcOffset		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.7
The current UTC offset between TAI(International Atomic Time) and UTC.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

zxAnPtpMstClockId		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.8
The master clock identity. This attribute value is hexadecimal data.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

zxAnPtpMstGrdmstClockId		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.9
The grandmaster clock identity. This attribute value is hexadecimal data.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

zxAnPtpMstGrdmstIsPtpTimescale		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.10
The value 'yes' indicates that the clock timescale of the grandmaster clock is PTP and 'no' otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

zxAnPtpMstGrdmstPriority1		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.11
The grandmaster clock priority 1. The value 0 indicates the highest priority.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstGrdmstPriority2		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.12
The grandmaster clock priority 2. The value 0 indicates the highest priority.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstGrdmstClockTraceClass		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.13
The grandmaster clock traceability class of the time or frequency distributed. The value 0 indicates the best traceability class.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstGrdmstClockAccuracy		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.14
The grandmaster clock accuracy. The value 0 indicates the highest clock accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpMstGrdmstClockOslv		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.15
The grandmaster clock offset scaled log variance. It is computed based on the theory of Allan deviation.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

zxAnPtpMstGrdmstTraversedClocks		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.16
The clocks traversed between the local clock and the grandmaster clock.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

zxAnPtpMstGrdmstTimeSource		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.17
The source of time used by the grandmaster clock.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	atomicClock(16), gps(32), terrestrialRadio(48), ptp(64), ntp(80), handset(96), other(144), internalOscillator(160)

zxAnPtpMstSourcePortLocation		1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.18
The source port location. uplinkCard(1): it means that the PTP master source port is located at the uplink card. masterControlCard(2): it means that the PTP master source port is located at the master control card. slaveControlCard(3): it means that the PTP master source port is located at the slave control card.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uplinkCard(1), masterControlCard(2), slaveControlCard(3)

zxAnPtpIfConfTable		1.3.6.1.4.1.3902.1082.120.15.2.1.7
The IEEE 1588 PTP port table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnPtpIfConfEntry

zxAnPtpIfConfEntry		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1
The IEEE 1588 PTP port entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnPtpIfConfEntry

zxAnPtpIfConfClockId		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.1
The PTP port clock identity. This attribute value is hexadecimal data.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

zxAnPtpIfConfNumber		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.2
The PTP port number.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnPtpIfConfState		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.3
The PTP port state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9)

zxAnPtpIfConfMinDelayReqInterval		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.4
The minimum interval between successive Delay_Req messages. us31250 means interval 2(-5)s us62500 means interval 2(-4)s us125000 means interval 2(-3)s us250000 means interval 2(-2)s us500000 means interval 2(-1)s oneSecond means interval 2(0)s
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	us31250(1), us62500(2), us125000(3), us250000(4), us500000(5), oneSecond(6)

zxAnPtpIfConfAnnounceInterval		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.6
The interval between successive Announce messages. us31250 means interval 2(-5)s us62500 means interval 2(-4)s us125000 means interval 2(-3)s us250000 means interval 2(-2)s us500000 means interval 2(-1)s oneSecond means interval 2(0)s
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	us31250(1), us62500(2), us125000(3), us250000(4), us500000(5), oneSecond(6)

zxAnPtpIfConfMaxLossAnnounceMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.7
The maximum number of Announce messages loss.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	2..255

zxAnPtpIfConfSyncInterval		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.8
The interval between successive synchronization messages. us31250 means interval 2(-5)s us62500 means interval 2(-4)s us125000 means interval 2(-3)s us250000 means interval 2(-2)s us500000 means interval 2(-1)s oneSecond means interval 2(0)s
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	us31250(1), us62500(2), us125000(3), us250000(4), us500000(5), oneSecond(6)

zxAnPtpIfConfLocalPriority		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.13
The PTP port local priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

zxAnPtpIfConfPtpMsgProtocolType		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.21
The PTP message protocol type. ipv4(1): it means the PTP messages is IPv4 protocol. ethernet(2): it means the PTP messages is Ethernet protocol.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ipv4(1), ethernet(2)

zxAnPtpIfConfAddressType		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.22
The PTP port address type. multicast(1): it means the PTP port address type is multicast. unicast(2): it means the PTP port address type is unicast.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	multicast(1), unicast(2)

zxAnPtpIfConfMsgForwardOption		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.23
The PTP message forwarding option. forwardable(1): it means the PTP messages is preferable to forward the PTP messages through the PTP port. nonforwardable(2): it means the PTP messages must never be forwarded through the PTP port.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	forwardable(1), nonforwardable(2)

zxAnPtpIfConfDelayCompensation		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.24
The PTP port delay compensation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-100000..100000

zxAnPtpIfConfAdminStatus		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.25
The PTP port administrative status. Enables or disables the PTP port.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zxAnPtpIfConfRowStatus		1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnPtpPrfSystemPtpPrf		1.3.6.1.4.1.3902.1082.120.15.2.1.20.1.1
The system PTP profile name. Refers to 'zxAnPtpPrfName'. An empty string indicates no binding any profile.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..40)

zxAnPtpPrfTable		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2
The IEEE 1588 PTP profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnPtpPrfEntry

zxAnPtpPrfEntry		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1
The IEEE 1588 PTP profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnPtpPrfEntry

zxAnPtpPrfName		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.1
The PTP profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..40)

zxAnPtpPrfPriority2		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.3
The PTP priority 2. The value 0 indicates the highest priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

zxAnPtpPrfDomainNumber		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.4
The PTP domain number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	24..43

zxAnPtpPrfLocalPriority		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.5
The PTP local priority. The value 1 indicates the highest priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

zxAnPtpPrfMaxStepsRemoved		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.6
The PTP maximum steps removed. The parameter is defined in [IEEE1588] is used to indicate the distance between a clock and the grandmaster clock in the network. It was originally intended to be used as a helpful tool to detect cyclic paths that may occur in PTP systems. By default it is required that a clock not qualify any Announce messages where the stepsRemoved field is equal to, or greater than, 255 in order to ensure that rogue frames are extinguished.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

zxAnPtpPrfBmcaOption		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.7
The PTP BMCA (best master clock algorithm) option. g82751(1): BMCA complies with G.8275.1. ieee1588(2): BMCA complies with IEEE 1588.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	g82751(1), ieee1588(2)

zxAnPtpPrfTraceOption		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.8
The PTP trace option. g82751(1): PTP trace complies with G.8275.1. g82751note3(2): PTP trace complies with G.8275.1 note 3. ieee1588(3): PTP trace complies with IEEE 1588.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	g82751(1), g82751note3(2), ieee1588(3)

zxAnPtpPrfHoldoverInTimeout		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.9
The holdover-in timeout. The value 0 indicates that the system clock do not enter into the holdover-in status.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1440

zxAnPtpPrfRowStatus		1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnPtpIfStatsTable		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2
The IEEE 1588 PTP port statistics table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnPtpIfStatsEntry

zxAnPtpIfStatsEntry		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1
The IEEE 1588 PTP port statistics entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnPtpIfStatsEntry

zxAnPtpIfStatsAnnounceMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.1
The number of PTP announce messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxAnPtpIfStatsSyncMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.2
The number of PTP synchronization messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxAnPtpIfStatsDelayReqMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.3
The number of PTP delay_req messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxAnPtpIfStatsDelayRespMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.4
The number of PTP delay_resp messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxAnPtpIfStatsFollowUpMsgs		1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.5
The number of PTP follow_up messages.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

zxAnSyncTime1ppsSrcTable		1.3.6.1.4.1.3902.1082.120.15.2.2.3
This table includes 1PPS source information in NE equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnSyncTime1ppsSrcEntry

zxAnSyncTime1ppsSrcEntry		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1
An entry in zxAnSyncTime1ppsSrcTable. to create a 1pps source,it must comply with the multi-variables usage rule - all the mib variables related to same fuction must be in one snmp set operation. the variables have two type mandatory and optional: Mandatory variables must be in the one snmp set operation. Optional variables may be in the one snmp set operation with the mandatory variables, but must not be used alone. case 1 - to create 1PPS signal source from 1PPS port: -Mandatory: zxAnSyncTime1ppsSrcRack, zxAnSyncTime1ppsSrcShelf, zxAnSyncTime1ppsSrcSlot, zxAnSyncTime1ppsSrcSignalType, zxAnSyncTime1ppsSrcPortType, zxAnSyncTime1ppsSrcPort, zxAnSyncTime1ppsSrcPriority, zxAnSyncTime1ppsSrcRowStatus, -Optional: case 3 - to destroy 1PPS signal -Mandatory: zxAnSyncTime1ppsSrcRowStatus,
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnSyncTime1ppsSrcEntry

zxAnSyncTime1ppsSrcId		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.1
This '1PPS+ToD' source id.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..255

zxAnSyncTime1ppsSrcRack		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.2
This object indicates the rack number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTime1ppsSrcShelf		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.3
This object indicates the shelf number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTime1ppsSrcSlot		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.4
This object indicates the slot number. Only support time card, such as cick.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..22

zxAnSyncTime1ppsSrcFirstPtp		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.5
The PTP node provided '1PPS+ToD' siginal is the first node of this slot or not.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

zxAnSyncTime1ppsSrcSignalType		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.6
The type of '1PPS+ToD' signal source. ptp(1) : 1PPS come from PTP onepps(2) : 1PPS come from physical 1pps port
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ptp(1), onepps(2)

zxAnSyncTime1ppsSrcPriority		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.7
The priority of '1PPS+ToD' signal source, value 1 is the highest priority.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..255

zxAnSyncTime1ppsSrcPortType		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.8
The '1PPS+ToD' signal source port type. It is valid only for the 'onepps' signal type. typeTtl(1) : physical port type TTL type422(2) : from physical port as RJ45
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	typeTtl(1), type422(2)

zxAnSyncTime1ppsSrcPort		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.9
The physical port number. It is valid only for the 'onepps' signal type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..4

zxAnSyncTime1ppsSrcWorkStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.10
The '1PPS+ToD' signal source work status, none(1) : indicates PTP source is invalid. active(2) : indicates PTP source is active, standby(3) : indicates PTP source is standby source,
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), active(2), standby(3)

zxAnSyncTime1ppsSrcValidStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.11
The '1PPS+ToD' singnal source work status. valid(1) : indicates the 1PPS signal is valid invalid(2): indicates the 1PPS signal is invalid When the value is invalid, then zxAnSyncTime1ppsSrcWorkStatus is none.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

zxAnSyncTime1ppsSrcPortStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.12
The '1PPS+ToD' signal source port status. It is valid only for the 'onepps' signal type. If zxAnSyncTime1ppsSrcSignalType is 'ptp', then the value is none. When the value is none or signalLos, then zxAnSyncTime1ppsSrcValidStatus is invalid.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), normal(2), signalLos(3)

zxAnSyncTime1ppsSrcFormat		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.13
The '1PPS+ToD' singnal source format. unknown(1): it indicates the '1PPS+ToD' signal source format is unknown. gpzda(2): it indicates the '1PPS+ToD' signal source format is GPZDA. gprmc(3): it indicates the '1PPS+ToD' signal source format is GPRMC. cmcc(4): it indicates the '1PPS+ToD' signal source format is CMCC.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), gpzda(2), gprmc(3), cmcc(4)

zxAnSyncTime1ppsSrcCurrentQL		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14
The '1PPS+ToD' singnal source current quality level. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. qlssua(4): quality level of type I/V slave clock, it is defined in recommendation G.812. qlssub(8): quality level of type VI slave clock, it is defined in recommendation G.812. qlsec(11): quality level of SDH equipment clock, it is defined in recommendation G.813. qldnu(15): quality level of unusable clock, it is defined in recommendation G.813.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	locked(1), qlprc(2), qlssua(4), qlssub(8), qlsec(11), qldnu(15)

zxAnSyncTime1ppsSrcTimeAccuracy		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.15
The '1PPS+ToD' singnal source time accuracy, value 0 indicates the highest accuracy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..3810

zxAnSyncTime1ppsSrcTimeSrcType		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.16
The '1PPS+ToD' singnal source time source type. bds(1): the time source type is beidou bavigation satellite system. gps(2): the time source type is global positioning system. ptp(3): the time source type is precision timing protocol system. other(255): the time source type is other system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	bds(1), gps(2), ptp(3), other(255)

zxAnSyncTime1ppsSrcDlyCompensate		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.17
The '1PPS+ToD' delay compensation.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnSyncTime1ppsSrcRowStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.30
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnSyncTimeTodSrcTable		1.3.6.1.4.1.3902.1082.120.15.2.2.4
This table includes TOD source information in NE equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnSyncTimeTodSrcEntry

zxAnSyncTimeTodSrcEntry		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1
An entry in zxAnSyncTimeTodSrcTable. to create a TOD source,it must comply with the multi-variables usage rule - all the mib variables related to same fuction must be in one snmp set operation. the variables have two type mandatory and optional: Mandatory variables must be in the one snmp set operation. Optional variables may be in the one snmp set operation with the mandatory variables, but must not be used alone. case 1 - to create tod source from physical tod port: -Mandatory: zxAnSyncTimeTodSrcRack, zxAnSyncTimeTodSrcShelf, zxAnSyncTimeTodSrcSlot, zxAnSyncTimeTodSrcPort, zxAnSyncTimeTodSrcSignalType, zxAnSyncTimeTodSrcRowStatus, -Optional: zxAnSyncTimeTodSrcYearAdjust, case 2 - to destroy tod source -Mandatory: zxAnSyncTimeTodSrcRowStatus,
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnSyncTimeTodSrcEntry

zxAnSyncTimeTodSrcId		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.1
This tod source id.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..255

zxAnSyncTimeTodSrcRack		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.2
This object indicates the rack number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTimeTodSrcShelf		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.3
This object indicates the shelf number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTimeTodSrcSlot		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.4
This object indicates the slot number. Only support time card, such as cick.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..22

zxAnSyncTimeTodSrcPort		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.5
This object indicates the port number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnSyncTimeTodSrcSignalType		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.6
The signal type of TOD signal source. gps(1) : GPS TOD form chinaMobile(2) : China Mobile Telecom's TOD form chinaUnicom(3) : China Unicom Telecom's TOD form chinaTelecom(4): China Telecom's TOD form
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	gps(1), chinaMobile(2), chinaUnicom(3), chinaTelecom(4)

zxAnSyncTimeTodSrcYearAdjust		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.7
The year adjustment value of TOD signal source. It is valid only for the 'gps' signal type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..2050

zxAnSyncTimeTodSrcPortStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.8
The TOD signal source port status. none(1) : none normal(2) : no alarm signalLos(3) : Loss of TOD
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), normal(2), signalLos(3)

zxAnSyncTimeTodSrcRowStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.30
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnSyncTimeOutputPortTable		1.3.6.1.4.1.3902.1082.120.15.2.2.5
This table includes 1PPS and TOD signal output ports information in NE equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnSyncTimeOutputPortEntry

zxAnSyncTimeOutputPortEntry		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1
An entry in zxAnSyncTimeOutputPortTable. to create a TOD output,it must comply with the multi-variables usage rule - all the mib variables related to same fuction must be in one snmp set operation. the variables have two type mandatory and optional: Mandatory variables must be in the one snmp set operation. Optional variables may be in the one snmp set operation with the mandatory variables, but must not be used alone. case 1 - to create tod output: -Mandatory: zxAnSyncTimeOutputRack, zxAnSyncTimeOutputShelf, zxAnSyncTimeOutputSlot, zxAnSyncTimeOutputPort, zxAnSyncTimeOutputPortEnable, zxAnSyncTimeOutputPortRowStatus, -Optional: case 3 - to destroy tod output -Mandatory: zxAnSyncTimeOutputPortRowStatus,
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnSyncTimeOutputPortEntry

zxAnSyncTimeOutputId		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.1
This time output id.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnSyncTimeOutputRack		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.2
This object indicates the rack number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTimeOutputShelf		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.3
This object indicates the shelf number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1

zxAnSyncTimeOutputSlot		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.4
This object indicates the slot number. Only support pon card.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..22

zxAnSyncTimeOutputPort		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.5
This object indicates the port number.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..8

zxAnSyncTimeOutputPortEnable		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.6
Enables or disables the output port of 1PPS and TOD signal. enable(1) : enable disable(2): disable
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

zxAnSyncTimeOutputPortPhaseAdjus		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.7
The phase adjustment value. It is valid only for the 1PPS signal.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1000000..1000000

zxAnSyncTimeOutputPortRowStatus		1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.30
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAn1588TimeAccuracyDegradeAlm		1.3.6.1.4.1.3902.1082.120.15.3.1.1
A zxAnAccuracyDegradedAlm trap is sent when the agent has detected that the time accuracy has been degraded.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1588TimeAccuracyDegradeClr		1.3.6.1.4.1.3902.1082.120.15.3.1.2
A zxAn1588TimeAccuracyDegradeClr trap is sent when the agent has detected that the time accuracy has come into the accurate status.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1588TimeSourceChanged		1.3.6.1.4.1.3902.1082.120.15.3.1.3
A zxAn1588TimeSourceChanged trap is sent when the agent has detected that the current time source of IEEE1588 device has been changed to another new time source.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1588LocalTimeStatusChanged		1.3.6.1.4.1.3902.1082.120.15.3.1.4
A zxAn1588LocalTimeStatusChanged trap is sent when the agent has detected that the current time status of IEEE1588 device has been changed to another new time status.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpNeverSyncAlm		1.3.6.1.4.1.3902.1082.120.15.3.2.1
A zxAnPtpNeverSyncAlm trap is sent when the agent has detected that the PTP clock has never been synchronized with a time source.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpNeverSyncClr		1.3.6.1.4.1.3902.1082.120.15.3.2.2
A zxAnPtpNeverSyncClr trap is sent when the agent has detected that the PTP clock has been synchronized with a time source.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpLolAlm		1.3.6.1.4.1.3902.1082.120.15.3.2.3
A zxAnPtpLolAlm trap is sent when the agent has detected that the PTP clock was in the loss of lock status.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpLolClr		1.3.6.1.4.1.3902.1082.120.15.3.2.4
A zxAnPtpLolClr trap is sent when the agent has detected that the PTP clock has been locked again.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpClockTCBelowThreshAlm		1.3.6.1.4.1.3902.1082.120.15.3.2.5
A zxAnPtpClockTCBelowThreshAlm trap is sent when the agent has detected that the PTP clock traceability class has been below zxAnPtpClockTraceClassThresh threshold.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpClockTCBelowThreshClr		1.3.6.1.4.1.3902.1082.120.15.3.2.6
A zxAnPtpClockTCBelowThreshClr trap is sent when the agent has detected that the PTP clock traceability class has not been below zxAnPtpClockTraceClassThresh threshold.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpAnnounceMsgLostAlm		1.3.6.1.4.1.3902.1082.120.15.3.2.7
A zxAnPtpAnnounceMsgLostAlm trap is sent when the agent has detected that the announce messages lost.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnPtpAnnounceMsgLostClr		1.3.6.1.4.1.3902.1082.120.15.3.2.8
A zxAnPtpAnnounceMsgLostClr trap is sent when the agent has detected that the announce messages are received again.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1ppsPlusTodLosAlm		1.3.6.1.4.1.3902.1082.120.15.3.3.1
A zxAn1ppsPlusTodLosAlm trap is sent when the agent has detected that the '1PPS+ToD' port was in the loss of signal status.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1ppsPlusTodLosClr		1.3.6.1.4.1.3902.1082.120.15.3.3.2
A zxAn1ppsPlusTodLosClr trap is sent when the agent has detected that the '1PPS+ToD' port has restored signal.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1ppsInSignalQlBelowThreshAlm		1.3.6.1.4.1.3902.1082.120.15.3.3.3
A zxAn1ppsInSignalQlBelowThreshAlm trap is sent when the agent has detected that the 1PPS input signal quality level of '1PPS+ToD' port has been below zxAn1ppsInputSignalQLThresh threshold.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAn1ppsInSignalQlBelowThreshClr		1.3.6.1.4.1.3902.1082.120.15.3.3.4
A zxAn1ppsInSignalQlBelowThreshClr trap is sent when the agent has detected that the 1PPS input signal quality level of '1PPS+ToD' port has not been below zxAn1ppsInputSignalQLThresh threshold.
Status: current	Access: read-create
NOTIFICATION-TYPE

zxAnIeee1588Conformance		1.3.6.1.4.1.3902.1082.120.15.4
OBJECT IDENTIFIER

zxAnIeee1588Compliances		1.3.6.1.4.1.3902.1082.120.15.4.1
OBJECT IDENTIFIER

zxAnIeee1588Groups		1.3.6.1.4.1.3902.1082.120.15.4.2
OBJECT IDENTIFIER

zxAnIeee1588Compliance		1.3.6.1.4.1.3902.1082.120.15.4.1.1
The compliance statement for entities which implement the Zte An IEEE1588 MIB. Implementation of this MIB is based on individual product needs.
Status: current	Access: read-create
MODULE-COMPLIANCE

zxAnIeee1588PtpPrfObjectsGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.1
A collection of objects providing IEEE1588 functions.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588PtpIfObjectsGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.2
A collection of objects providing IEEE1588 port functions.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee15881ppsObjectsGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.3
A collection of global objects providing 1PPS functions.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588PtpMstInfoGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.4
A collection of objects providing PTP master information.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588TimeStatusGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.5
A collection of objects providing time status information.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588PktStatsGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.6
A collection of objects providing packets statistics.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588AlmThreshGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.7
A collection of objects providing alarm thresholds.
Status: current	Access: read-create
OBJECT-GROUP

zxAnIeee1588AlmTrapGroup		1.3.6.1.4.1.3902.1082.120.15.4.2.8
A collection of objects providing 1588 alarm functions
Status: current	Access: read-create
OBJECT-GROUP