ZTE-AN-FILE-MIB

File: ZTE-AN-FILE-MIB.mib (42552 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI ZTE-AN-SMI
SNMPv2-CONF INET-ADDRESS-MIB

Imported symbols

RowStatus DisplayString TruthValue
DateAndTime MODULE-IDENTITY OBJECT-TYPE
Integer32 IpAddress Counter64
Unsigned32 NOTIFICATION-TYPE zxAccessNode
zxAnSystem MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP InetAddressType InetAddress

Defined Types

ZxAnFileEntry  
SEQUENCE    
  zxAnFileRack Integer32
  zxAnFileShelf Integer32
  zxAnFileSlot Integer32
  zxAnFileDevId Integer32
  zxAnFileType INTEGER
  zxAnFileName DisplayString
  zxAnFileSize Integer32
  zxAnFileModifyTime DateAndTime
  zxAnFileStorageDevType INTEGER
  zxAnFileOperation INTEGER

ZxAnFileSyncStatusEntry  
SEQUENCE    
  zxAnFileSyncStatus INTEGER
  zxAnFileSyncProgress INTEGER
  zxAnFileSyncFailedReason INTEGER
  zxAnFileSyncDevType INTEGER

ZxAnFileListEntry  
SEQUENCE    
  zxAnFileListRack Integer32
  zxAnFileListShelf Integer32
  zxAnFileListSlot Integer32
  zxAnFileListDevType INTEGER
  zxAnFileListDevId Integer32
  zxAnFileListDirectory DisplayString
  zxAnFileListName DisplayString
  zxAnFileListSize Integer32
  zxAnFileListWriteTime DateAndTime
  zxAnFileListPermissions BITS

Defined Values

zxAnFileMib 1.3.6.1.4.1.3902.1082.20.50
This MIB defines zte Access Node software management.
MODULE-IDENTITY    

zxAnFileGlobalObjects 1.3.6.1.4.1.3902.1082.20.50.1
OBJECT IDENTIFIER    

zxAnFileObjects 1.3.6.1.4.1.3902.1082.20.50.2
OBJECT IDENTIFIER    

zxAnFileNotifications 1.3.6.1.4.1.3902.1082.20.50.3
OBJECT IDENTIFIER    

zxAnFileConformance 1.3.6.1.4.1.3902.1082.20.50.4
OBJECT IDENTIFIER    

zxAnFileFtpOperObjects 1.3.6.1.4.1.3902.1082.20.50.2.1
OBJECT IDENTIFIER    

zxAnFileFtpOperGlobalObjects 1.3.6.1.4.1.3902.1082.20.50.2.1.1
OBJECT IDENTIFIER    

zxAnFileSoftwareObjects 1.3.6.1.4.1.3902.1082.20.50.2.2
OBJECT IDENTIFIER    

zxAnFileExplorerObjects 1.3.6.1.4.1.3902.1082.20.50.2.3
OBJECT IDENTIFIER    

zxAnFileExplorerGlobalObjects 1.3.6.1.4.1.3902.1082.20.50.2.3.1
OBJECT IDENTIFIER    

zxAnFileSyncObjects 1.3.6.1.4.1.3902.1082.20.50.2.2.10
OBJECT IDENTIFIER    

zxAnFileSyncGlobalObjects 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1
OBJECT IDENTIFIER    

zxAnFileCompliances 1.3.6.1.4.1.3902.1082.20.50.4.1
OBJECT IDENTIFIER    

zxAnFileGroups 1.3.6.1.4.1.3902.1082.20.50.4.2
OBJECT IDENTIFIER    

zxAnFileFtpOperTraps 1.3.6.1.4.1.3902.1082.20.50.3.1
OBJECT IDENTIFIER    

zxAnFileMgmtCapabilities 1.3.6.1.4.1.3902.1082.20.50.1.1
The file management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. supportDownloadFileToSdCard(0): value 1 means zxAnFileFtpDestStorageDevId is supported. NOTE: Not recommended to display it in NMS.
Status: current Access: read-only
OBJECT-TYPE    
  BITS supportDownloadFileToSdCard(0)  

zxAnFileLoadDefaultConfiguration 1.3.6.1.4.1.3902.1082.20.50.1.2
Use this parameter to load default Configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER loadDefaultConfiguration(1)  

zxAnFileFtpFileType 1.3.6.1.4.1.3902.1082.20.50.2.1.1.1
The ftp client function is used to implement the transmission of file between an agent and a manager.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER softwareNe(1), softwareRemoteUnit(2), softwarePatch(3), softwarePackage(4), softwareSet(5), configurationStartup(11), configurationRunning(12), configurationRemoteUnit(13), configurationNarrowband(14), licenseNarrowband(21), license(22), syslogDebug(31), syslogSnmp(32), syslogRunning(33), syslogCliOperation(34), syslogEmergency(35), syslogAlarm(36), syslogAlarmDebug(37), syslogCapture(38), perfMeasurementPoints(51), perfThreshold(52), perfLog(53), narrowbandDataV0100(61), narrowbandDataV0101(62), debugScript(71), debugResult(72), macSnapCollect(81), macAccCollect(82), allocation(90), linkupLogVdsl(255), linkupLogShdsl(256), linkupLogAdsl(257), dataBulkMeasurement(259), other(513)  

zxAnFileFtpOperType 1.3.6.1.4.1.3902.1082.20.50.2.1.1.2
UpLoad: put file to NMS ftp server.. DownLoad: get file from NMS ftp server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER upload(1), downLoad(2)  

zxAnFileFtpAction 1.3.6.1.4.1.3902.1082.20.50.2.1.1.3
Ftp administrative status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cancelCurrentFtpSession(1)  

zxAnFileFtpSvrIpAddressType 1.3.6.1.4.1.3902.1082.20.50.2.1.1.4
IP address type of the file server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

zxAnFileFtpSvrIpAddress 1.3.6.1.4.1.3902.1082.20.50.2.1.1.5
The IP Address for the FTP server used for downloading and/or uploading files.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

zxAnFileFtpSvrUserName 1.3.6.1.4.1.3902.1082.20.50.2.1.1.6
The FTP username.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnFileFtpSvrUserPwd 1.3.6.1.4.1.3902.1082.20.50.2.1.1.7
The FTP User Password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnFileFtpSvrProtocolType 1.3.6.1.4.1.3902.1082.20.50.2.1.1.8
The flag is used for indicating the ftp protocol when downing versions between EMS and NE.It include two protocols:one is ftp and another is sftp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftp(1), sftp(2)  

zxAnFileFtpSvrFilePath 1.3.6.1.4.1.3902.1082.20.50.2.1.1.9
The FTP file path which starts from the root directory.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..256)  

zxAnFileFtpSvrFileName 1.3.6.1.4.1.3902.1082.20.50.2.1.1.10
The FTP file name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnFileFtpDestStorageDevId 1.3.6.1.4.1.3902.1082.20.50.2.1.1.11
The ID of the FTP destination storage device of the main control card. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ...
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnFileFtpFileRetrieveStartTime 1.3.6.1.4.1.3902.1082.20.50.2.1.1.21
Specifies the start of the time for which the selected PM measurements shall be retrieved (this parameter only applies for the retrieval of historical PM data).
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

zxAnFileFtpFileRetrieveEndTime 1.3.6.1.4.1.3902.1082.20.50.2.1.1.22
Specifies the end of the time for which the selected PM measurements shall be retrieved (this parameter only applies for the retrieval of historical PM data).
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

zxAnFileFtpPerfLogType 1.3.6.1.4.1.3902.1082.20.50.2.1.1.30
The time granularity of performance data files retrieval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER for15Minutes(1), for24Hours(2)  

zxAnFileFtpOperStatus 1.3.6.1.4.1.3902.1082.20.50.2.1.1.50
Ftp operational status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), downloading(2), uploading(3), synchronizing(4), success(5), failed(6), masterSuccessSlaveFailed(7)  

zxAnFileFtpCurrFileName 1.3.6.1.4.1.3902.1082.20.50.2.1.1.51
The name of current file which is downloading or uploading.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnFileFtpCurrFileSize 1.3.6.1.4.1.3902.1082.20.50.2.1.1.52
The size of current file which is downloading or uploading.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnFileFtpCurrFileProgress 1.3.6.1.4.1.3902.1082.20.50.2.1.1.53
The total progress of upload or download version , including master and slave card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

zxAnFileFtpTotalFiles 1.3.6.1.4.1.3902.1082.20.50.2.1.1.54
Total count of files will be downloaded or uploaded.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnFileFtpSuccessFiles 1.3.6.1.4.1.3902.1082.20.50.2.1.1.55
Count of files which are downloaded or uploaded successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnFileFtpFailedReason 1.3.6.1.4.1.3902.1082.20.50.2.1.1.56
Ftp failed reason.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), fileNameTooLong(2), fileServerConnectFailed(3), fileServerProtocolTypeError(4), fileNotExist(5), getFileSizeFailed(6), fileCheckFailed(7), fileAccessFailed(8), diskFull(9), otherOperationInProgress(10), userCanceled(11), ramFull(12), unzipFailed(13), sdCardOffline(21), sdCardDisabled(22), sdCardBusy(23), otherErrors(255)  

zxAnFileFtpFinishedNotify 1.3.6.1.4.1.3902.1082.20.50.2.1.1.80
Use this parameter to notify the agent that the FTP transfer has been finished. To query this object, always return 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER finished(1)  

zxAnFileFtpVrfName 1.3.6.1.4.1.3902.1082.20.50.2.1.1.81
The VRF name. Setting an empty string is not supported. To query this object, always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

zxAnFileTable 1.3.6.1.4.1.3902.1082.20.50.2.2.2
A table entry containing file information .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnFileEntry

zxAnFileEntry 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1
An entry of zxAnFileTable
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnFileEntry  

zxAnFileRack 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileShelf 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileSlot 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileDevId 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.4
The ID of the storage device. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ...
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileType 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.5
The type of the file.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER softwareNe(1), softwareRemoteUnit(2), softwarePatch(3), configurationStartup(11), configurationRunning(12), configurationRemoteUnit(13), configurationNarrowband(14), configurationCliUser(15), licenseNarrowband(21), license(22), syslogDebug(31), syslogSnmp(32), syslogRunning(33), syslogCliOperation(34), syslogEmergency(35), syslogAlarm(36), perfMeasurementPoints(51), perfThreshold(52), perfLog(53), confPowerConsumption(61), linkupLogVdsl(255), linkupLogShdsl(256), linkupLogAdsl(257), dataBulkMeasurement(258), confSelfswitchPhoneNumber(513)  

zxAnFileName 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.6
File name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnFileSize 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.7
File size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnFileModifyTime 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.8
The last file modification time.The format is yyyy-mm-dd HH:MM:SS.For example, 2001-01-01 02:22:33
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnFileStorageDevType 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.9
The type of the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER flash(1), sdCard(2)  

zxAnFileOperation 1.3.6.1.4.1.3902.1082.20.50.2.2.2.1.15
The file operation type. This object is only used to erase the software file and the patch file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER erase(1)  

zxAnFileSyncRack 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnFileSyncShelf 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxAnFileSyncFileType 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.3
The type of the file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER softwareNe(1), softwareRemoteUnit(2), softwarePatch(3), configurationStartup(11), configurationRunning(12), configurationRemoteUnit(13), configurationNarrowband(14), configurationCliUser(15), licenseNarrowband(21), license(22), syslogDebug(31), syslogSnmp(32), syslogRunning(33), syslogCliOperation(34), syslogEmergency(35), syslogAlarm(36), perfMeasurementPoints(51), perfThreshold(52), perfLog(53), confPowerConsumption(61), linkupLogVdsl(255), linkupLogShdsl(256), linkupLogAdsl(257), dataBulkMeasurement(258), confSelfswitchPhoneNumber(513)  

zxAnFileSyncFileName 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.4
File name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnFileSyncOperation 1.3.6.1.4.1.3902.1082.20.50.2.2.10.1.15
Adminstrative status of file or folder.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER syncToSlave(1), cancelSyncToSlave(2)  

zxAnFileSyncStatusTable 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2
A table entry containing status information of files synchronization from master card to slave card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnFileSyncStatusEntry

zxAnFileSyncStatusEntry 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1
An entry of zxAnFileSyncStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnFileSyncStatusEntry  

zxAnFileSyncStatus 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.2
Status of synchronization file from master card to slave card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), inProgress(2), success(3), failed(4), sameFiles(5)  

zxAnFileSyncProgress 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.3
The total progress of sync file.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

zxAnFileSyncFailedReason 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.4
The failed reason of synchronization file from master card to slave card.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), fileNotExist(3), fileCheckFailed(4), diskFull(5), timeout(6), otherOperationInProgress(7), userCanceled(8), otherErrors(255)  

zxAnFileSyncDevType 1.3.6.1.4.1.3902.1082.20.50.2.2.10.2.1.5
The type of the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER flash(1), sdCard(2)  

zxAnFileExplorerSourceFile 1.3.6.1.4.1.3902.1082.20.50.2.3.1.1
The source file. The format is: 'rack/shelf/slot/devType/devId/directory/file'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..128)  

zxAnFileExplorerDestinationDir 1.3.6.1.4.1.3902.1082.20.50.2.3.1.2
The destination directory. The format is: 'rack/shelf/slot/devType/devId/directory'. If the zxAnFileExplorerOperation is 'delete' or 'rename', this object will be set to empty string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnFileExplorerRenamedName 1.3.6.1.4.1.3902.1082.20.50.2.3.1.3
The renamed name. If the zxAnFileExplorerOperation is 'delete', this object will be set to empty string. If the zxAnFileExplorerOperation is 'copy' and this object is not empty string, the source file name will be changed to the zxAnFileExplorerRenamedName after the copying operation. If the zxAnFileExplorerOperation is 'copy' and this object is empty string, the source file name will not be changed after the copy operation. If the zxAnFileExplorerOperation is 'rename', this object means the renamed name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnFileExplorerOperation 1.3.6.1.4.1.3902.1082.20.50.2.3.1.4
The file operation type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), copy(2), cancelCopy(3), rename(4)  

zxAnFileExplorerOperStatus 1.3.6.1.4.1.3902.1082.20.50.2.3.1.5
The status of the file operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStarted(1), inProgress(2), success(3), failed(4)  

zxAnFileExplorerOperProgress 1.3.6.1.4.1.3902.1082.20.50.2.3.1.6
The progress of the file operation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

zxAnFileExplorerOperFailedReason 1.3.6.1.4.1.3902.1082.20.50.2.3.1.7
The failed reasion of the file operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noError(1), fileNotExisted(2), fileExisted(3), diskFull(4), timeout(5), otherOperationInProgress(6), systemFileNameUsed(7), slaveControlCardNotReady(8), dataTransmissionFailed(9), otherErrors(255)  

zxAnFileListTable 1.3.6.1.4.1.3902.1082.20.50.2.3.2
The file list table. This table is added to support the new index of the NE files: 'rack-shelf-slot-devType-devId-directory-name'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnFileListEntry

zxAnFileListEntry 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1
An entry of zxAnFileListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZxAnFileListEntry  

zxAnFileListRack 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.1
The rack number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileListShelf 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.2
The shelf number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileListSlot 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.3
The slot number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileListDevType 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.4
The device type. 1 means flash; 2 means SD card.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER flash(1), sdCard(2)  

zxAnFileListDevId 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.5
The device ID. This object is not used now.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxAnFileListDirectory 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.6
The full directory of the file.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..128)  

zxAnFileListName 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.7
The file name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..128)  

zxAnFileListSize 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.8
The file size.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxAnFileListWriteTime 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.9
The write time of the file.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxAnFileListPermissions 1.3.6.1.4.1.3902.1082.20.50.2.3.2.1.10
The access permissions of the file.
Status: current Access: read-only
OBJECT-TYPE    
  BITS read(0), write(1)  

zxAnFileFtpDownloadFinished 1.3.6.1.4.1.3902.1082.20.50.3.1.1
A zxAnFileFtpDownloadFinished is sent when the agent has detected that the File download is finished.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxAnFileFtpUploadFinished 1.3.6.1.4.1.3902.1082.20.50.3.1.2
A zxAnFileFtpUploadFinished is sent when the agent has detected that the File upload is finished.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxAnFileCompliance 1.3.6.1.4.1.3902.1082.20.50.4.1.1
The compliance statement for SNMP entities which implement the ZTE-AN-SOFTWARE-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

zxAnFileLoadDefConfGroup 1.3.6.1.4.1.3902.1082.20.50.4.2.1
The collection of objects which are used to to load default Configuration.
Status: current Access: read-only
OBJECT-GROUP    

zxAnFileFtpOperGroup 1.3.6.1.4.1.3902.1082.20.50.4.2.2
The collection of objects which are used to implement transmission of file between an agent and a manager (download & upload).
Status: current Access: read-only
OBJECT-GROUP    

zxAnFileMgmtGroup 1.3.6.1.4.1.3902.1082.20.50.4.2.3
The collection of objects which are used to implement file management such as display attribute of file, delete file, synchronize file to slave board.
Status: current Access: read-only
OBJECT-GROUP    

zxAnFileSyncGroup 1.3.6.1.4.1.3902.1082.20.50.4.2.4
The collection of objects which are used to implement file synchronization.
Status: current Access: read-only
OBJECT-GROUP    

zxAnFileNotificationsGroup 1.3.6.1.4.1.3902.1082.20.50.4.2.10
The notifications which indicate specific changes, include file upload/download finished.
Status: current Access: read-only
OBJECT-GROUP