ZTE-AN-CHASSIS-MIB

File: ZTE-AN-CHASSIS-MIB.mib (58308 bytes)

Imported modules

SNMPv2-TC	SNMPv2-SMI	ZTE-AN-SMI
SNMPv2-CONF	ZTE-AN-SOFTWARE-MIB	INET-ADDRESS-MIB

Imported symbols

RowStatus	DisplayString	TruthValue
DateAndTime	MODULE-IDENTITY	OBJECT-TYPE
Integer32	NOTIFICATION-TYPE	IpAddress
zxAccessNode	zxAnEquipment	MODULE-COMPLIANCE
OBJECT-GROUP	NOTIFICATION-GROUP	zxAnSwCardVersion
InetAddressType	InetAddress	InetAddressPrefixLength

Defined Types

ZxAnRackEntry
SEQUENCE
	zxAnRack	Integer32
	zxAnRackActualType	Integer32
	zxAnRackConfType	Integer32
	zxAnRackInvSn	DisplayString
	zxAnRackRowStatus	RowStatus

ZxAnShelfEntry
SEQUENCE
	zxAnShelf	Integer32
	zxAnShelfHardwareVersion	DisplayString
	zxAnShelfActualType	Integer32
	zxAnShelfConfType	Integer32
	zxAnShelfInvSn	DisplayString
	zxAnShelfCleiCode	DisplayString
	zxAnLogicShelfNo	Integer32
	zxAnShelfRowStatus	RowStatus

ZxAnCardEntry
SEQUENCE
	zxAnSlot	Integer32
	zxAnCardConfMainType	Integer32
	zxAnCardActualMainType	Integer32
	zxAnCardActualType	DisplayString
	zxAnCardOperStatus	INTEGER
	zxAnCardAdminStatus	INTEGER
	zxAnCardPortNums	Integer32
	zxAnCardActivePortNums	Integer32
	zxAnCardCpuLoad	Integer32
	zxAnCardCpuLoadThreshold	Integer32
	zxAnCardMemUsage	Integer32
	zxAnCardMemUsageThreshold	Integer32
	zxAnCardStandbyStatus	INTEGER
	zxAnCardInvSn	DisplayString
	zxAnCardCleiCode	DisplayString
	zxAnCardAccessoriesType	DisplayString
	zxAnCardAccessoriesOperStatus	INTEGER
	zxAnCardMemSize	Integer32
	zxAnCardAvailableStorageSize	Integer32
	zxAnCardTotalStorageSize	Integer32
	zxAnCardHardwareVersion	DisplayString
	zxAnCardPowerSavingEnable	INTEGER
	zxAnCardLastStartupTime	DateAndTime
	zxAnCardCpldVersion	DisplayString
	zxAnCardFirmwareVersion	DisplayString
	zxAnCardOtherFirmwareVersions	DisplayString
	zxAnCardManufacturingCode	DisplayString
	zxAnCardCpuOverloadReason	INTEGER
	zxAnCardMcuVersion	DisplayString
	zxAnCardBootwareVersion	DisplayString
	zxAnCardPn	DisplayString
	zxAnCardLastResetReason	INTEGER
	zxAnCardCpuInfo	DisplayString
	zxAnCardChipsetType	INTEGER
	zxAnCardChipsetInfo	DisplayString
	zxAnCardOperatorCode	DisplayString
	zxAnCardSubCardName	DisplayString
	zxAnCardResetTimes	Integer32
	zxAnCardResetTimesClear	INTEGER
	zxAnCardName	DisplayString
	zxAnCardMachineId	DisplayString
	zxAnCardRowStatus	RowStatus

ZxAnCardHisMinPerfEntry
SEQUENCE
	zxAnCardHisMinIntervalNo	Integer32
	zxAnCardHisMinIntervalValidData	INTEGER
	zxAnCardHisMinDateTime	DateAndTime
	zxAnCardHisMinCpuLoad	Integer32
	zxAnCardHisMinMemUsage	Integer32

ZxAnCardBladeEntry
SEQUENCE
	zxAnCardBladeAdminStatus	INTEGER
	zxAnCardBladeOperStatus	INTEGER
	zxAnCardBladeIpv4Address	IpAddress
	zxAnCardBladeIpv4AddrSubnetMask	IpAddress
	zxAnCardBladeIpv4AddrGateway	IpAddress
	zxAnCardBladeIpv6Address	InetAddress
	zxAnCardBladeIpv6AddrPfxLen	InetAddressPrefixLength
	zxAnCardBladeIpv6AddrGateway	InetAddress

Defined Values

zxAnChassisMib		1.3.6.1.4.1.3902.1082.10.1
This MIB defines zte Access Node chassis managed objects.
MODULE-IDENTITY

zxAnChassisGlobalObjects		1.3.6.1.4.1.3902.1082.10.1.1
OBJECT IDENTIFIER

zxAnChassisObjects		1.3.6.1.4.1.3902.1082.10.1.2
OBJECT IDENTIFIER

zxAnChassisNotifications		1.3.6.1.4.1.3902.1082.10.1.3
OBJECT IDENTIFIER

zxAnChassisSysTraps		1.3.6.1.4.1.3902.1082.10.1.3.1
OBJECT IDENTIFIER

zxAnChassisCardTraps		1.3.6.1.4.1.3902.1082.10.1.3.2
OBJECT IDENTIFIER

zxAnChassisSysReboot		1.3.6.1.4.1.3902.1082.10.1.1.1
Reboot system.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	rebootSystem(1)

zxAnChassisSysLastRebootReason		1.3.6.1.4.1.3902.1082.10.1.1.2
It indicates device coldstart or warmstart reason byCli(1) warmstart by command, byNms(2) warmstart by network management, byWatchdog(3) warmstart by watchdog, byPowerOff(4) coldstart by poweroff, byProcessSuspended(6) warmstart by process suspended, unknown (99) restart by other reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	byCli(1), byNms(2), byWatchdog(3), byPowerOff(4), bySoftwareRestart(5), byProcessSuspended(6), unknown(99)

zxAnChassisSysLastSwapReason		1.3.6.1.4.1.3902.1082.10.1.1.3
Last swap request,such as force,plug-out or others. forced(1) swap by command or network management, cardOffline(2) swap by the main control board poweroff or pull out, reset(3) swap by the main control board reset self, cardDown(99) swap by other reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	forced(1), cardOffline(2), reset(3), cardDown(99)

zxAnChassisPnpMode		1.3.6.1.4.1.3902.1082.10.1.1.4
config Ne card PNP mode,PNP mode means when card on shelf, then this card can use without add it
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zxAnChassisSysRebootTimes		1.3.6.1.4.1.3902.1082.10.1.1.5
The system rebooting times
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnChassisSysRebootTimesClear		1.3.6.1.4.1.3902.1082.10.1.1.6
Clear the system rebooting times. When get this variable, always return 1.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

zxAnChassisCardResetTimesClear		1.3.6.1.4.1.3902.1082.10.1.1.7
Clear the resetting times of all cards of the NE. When get this variable, always return 1.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1)

zxAnChassisCapabilities		1.3.6.1.4.1.3902.1082.10.1.1.100
The chassis management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported. mcuVerAndBootVerAndPnSupported(0): value 1 means the following objects are supported: zxAnCardMcuVersion zxAnCardBootwareVersion zxAnCardPn cardLastResetReasonSupported(1): value 1 means zxAnCardLastResetReason is supported cardCpuChipSetInfoSupported(2): value 1 means the following objects are supported: zxAnCardCpuInfo zxAnCardChipsetType zxAnCardChipsetInfo. cardOperatorCodeSupported(3): value 1 means zxAnCardOperatorCode is supported. cardResetTimesClearSupported(4): value 1 means zxAnCardResetTimesClear is supported.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	mcuVerAndBootVerAndPnSupported(0), cardLastResetReasonSupported(1), cardCpuChipSetInfoSupported(2), cardOperatorCodeSupported(3), cardResetTimesClearSupported(4)

zxAnRackTable		1.3.6.1.4.1.3902.1082.10.1.2.2
This table includes the enable or disable plug and play of the rack.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnRackEntry

zxAnRackEntry		1.3.6.1.4.1.3902.1082.10.1.2.2.1
An entry in zxAnRackTable. This table is not supported in C6XX.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnRackEntry

zxAnRack		1.3.6.1.4.1.3902.1082.10.1.2.2.1.1
The range of zxAnRack is 1~1 for DT
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnRackActualType		1.3.6.1.4.1.3902.1082.10.1.2.2.1.2
This MIB is defined for actual rack type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnRackConfType		1.3.6.1.4.1.3902.1082.10.1.2.2.1.3
This MIB is defined for configged rack type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnRackInvSn		1.3.6.1.4.1.3902.1082.10.1.2.2.1.4
This MIB is defined for serial number of this rack. it is used by inventroy management.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnRackRowStatus		1.3.6.1.4.1.3902.1082.10.1.2.2.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnRackConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnShelfTable		1.3.6.1.4.1.3902.1082.10.1.2.3
This table includes the enable or disable plug and play of the shelf.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnShelfEntry

zxAnShelfEntry		1.3.6.1.4.1.3902.1082.10.1.2.3.1
An entry in zxAnShelfTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnShelfEntry

zxAnShelf		1.3.6.1.4.1.3902.1082.10.1.2.3.1.1
The range of zxAnShelf is 1~1 for DT
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnShelfHardwareVersion		1.3.6.1.4.1.3902.1082.10.1.2.3.1.2
The hard driver on the shelf.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnShelfActualType		1.3.6.1.4.1.3902.1082.10.1.2.3.1.3
The actual shelf type.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnShelfConfType		1.3.6.1.4.1.3902.1082.10.1.2.3.1.4
The configuration shelf type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnShelfInvSn		1.3.6.1.4.1.3902.1082.10.1.2.3.1.5
The serial number of this shelf. it is used by inventroy management.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnShelfCleiCode		1.3.6.1.4.1.3902.1082.10.1.2.3.1.6
The CLEI code of this Shelf. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnLogicShelfNo		1.3.6.1.4.1.3902.1082.10.1.2.3.1.7
The logic Shelf number
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnShelfRowStatus		1.3.6.1.4.1.3902.1082.10.1.2.3.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnShelfConfType have been set. To delete a row in this table, a manager must set this object to destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnCardTable		1.3.6.1.4.1.3902.1082.10.1.2.4
This table includes the enable or disable plug and play of the Card.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnCardEntry

zxAnCardEntry		1.3.6.1.4.1.3902.1082.10.1.2.4.1
An entry in zxAnCardTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnCardEntry

zxAnSlot		1.3.6.1.4.1.3902.1082.10.1.2.4.1.1
The range of zxAnSlot is 0~20 for DT IEC-SHELF, and the range of zxAnSlot is 0~22 for DT ETSI-SHELF
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnCardConfMainType		1.3.6.1.4.1.3902.1082.10.1.2.4.1.2
The main card type to config on the slot. Main card type indicates the category of hardware, such as 64-ports adsl card,4-ports ethernet card.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

zxAnCardActualMainType		1.3.6.1.4.1.3902.1082.10.1.2.4.1.3
The actually main card type on the slot.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardActualType		1.3.6.1.4.1.3902.1082.10.1.2.4.1.4
The actually card type on the slot. Card type indicates the type of detailed hardware,such as ATUGA and ATUGB, they'er all 32-ports Adsl card and they all provide general Adsl service,but they have different chips. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnCardOperStatus		1.3.6.1.4.1.3902.1082.10.1.2.4.1.5
This MIB is defined for the card status. inService(1) -- card plugged in,running normally and service is being provided normally. notInService(2)-- card plugged in,running normally but service is stopped. hwOnline(3) -- card plugged in and card communication is ok, but software isn't running now. hwOffline(4) -- card is pulled out or card not plugged in, but added to agent's database only. configuring(5) -- card plugged in, but it is configuring. configFailed(6)-- card plugged in, but configuration failed. typeMismatch(7)-- card plugged in, but it's type is mismatch. deactived(8) -- card plugged in, but it is deactivated by a manager. faulty(9) -- fault occurs when card is running normally invalid(10) -- invalid card instance, such as adding card failed. noPower(11) -- power card plugged in, but no power input. unauthorized(12) -- card plugged in, but it's bugsell and the software of the card doesn't run now. It is not supported by C600 series NE. adminDown(13) -- card plugged in, running normally, but the administrative status of the card is deactived. powerSaving(34) -- card plugged in, but it's power saving status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inService(1), notInService(2), hwOnline(3), hwOffline(4), configuring(5), configFailed(6), typeMismatch(7), deactived(8), faulty(9), invalid(10), noPower(11), unauthorized(12), adminDown(13), powerSaving(34)

zxAnCardAdminStatus		1.3.6.1.4.1.3902.1082.10.1.2.4.1.6
This MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) -- reset the card. switch(2) -- switch card between master and slave status. stopService(3) -- stop service normally. active(4) -- activate this card and enable the service. deactive(5) -- deactivate this card and disable the service forcedly.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	reset(1), switch(2), stopService(3), active(4), deactive(5)

zxAnCardPortNums		1.3.6.1.4.1.3902.1082.10.1.2.4.1.7
The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardActivePortNums		1.3.6.1.4.1.3902.1082.10.1.2.4.1.8
The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardCpuLoad		1.3.6.1.4.1.3902.1082.10.1.2.4.1.9
The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

zxAnCardCpuLoadThreshold		1.3.6.1.4.1.3902.1082.10.1.2.4.1.10
The CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm trap should be generated by agent.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..100

zxAnCardMemUsage		1.3.6.1.4.1.3902.1082.10.1.2.4.1.11
The current memory usage of this board. If the board has no this attribute,it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

zxAnCardMemUsageThreshold		1.3.6.1.4.1.3902.1082.10.1.2.4.1.12
The memory usage threshold of this board. When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm trap should be generated by agent.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..100

zxAnCardStandbyStatus		1.3.6.1.4.1.3902.1082.10.1.2.4.1.13
The card operation status on the card.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	main(1), standby(2), unknown(15)

zxAnCardInvSn		1.3.6.1.4.1.3902.1082.10.1.2.4.1.14
The serial number of this card. it is used by inventroy management.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnCardCleiCode		1.3.6.1.4.1.3902.1082.10.1.2.4.1.15
The CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardAccessoriesType		1.3.6.1.4.1.3902.1082.10.1.2.4.1.16
The accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's splitter.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardAccessoriesOperStatus		1.3.6.1.4.1.3902.1082.10.1.2.4.1.17
The operational status of the card accessories.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), testing(3), unknow(4)

zxAnCardMemSize		1.3.6.1.4.1.3902.1082.10.1.2.4.1.19
The current memory size of this board. If the board has no this attribute,it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardAvailableStorageSize		1.3.6.1.4.1.3902.1082.10.1.2.4.1.21
The available storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardTotalStorageSize		1.3.6.1.4.1.3902.1082.10.1.2.4.1.22
The total storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardHardwareVersion		1.3.6.1.4.1.3902.1082.10.1.2.4.1.23
The hard version in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardPowerSavingEnable		1.3.6.1.4.1.3902.1082.10.1.2.4.1.24
Enable or disable the power saving of the card.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

zxAnCardLastStartupTime		1.3.6.1.4.1.3902.1082.10.1.2.4.1.25
The last startup time of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zxAnCardCpldVersion		1.3.6.1.4.1.3902.1082.10.1.2.4.1.26
The CPLD version in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardFirmwareVersion		1.3.6.1.4.1.3902.1082.10.1.2.4.1.27
The firmware version in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardOtherFirmwareVersions		1.3.6.1.4.1.3902.1082.10.1.2.4.1.28
The other firmware versions in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardManufacturingCode		1.3.6.1.4.1.3902.1082.10.1.2.4.1.29
The manufacturing code of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardCpuOverloadReason		1.3.6.1.4.1.3902.1082.10.1.2.4.1.30
The CPU overloading reason. normal(1): value 1 means the CPU load is normal. tooManyNetworkPackets(2): value 2 means that the CPU is busy processing too many network packets. performanceCollectionTasksBusy(3): value 3 means that the CPU is busy processing the performance collection tasks. otherTasksBusy(255): value 255 means that the CPU is busy processing other tasks.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	normal(1), tooManyNetworkPackets(2), performanceCollectionTasksBusy(3), otherTasksBusy(255)

zxAnCardMcuVersion		1.3.6.1.4.1.3902.1082.10.1.2.4.1.31
The MCU version in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardBootwareVersion		1.3.6.1.4.1.3902.1082.10.1.2.4.1.32
The bootware version in this card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardPn		1.3.6.1.4.1.3902.1082.10.1.2.4.1.33
The part number of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnCardLastResetReason		1.3.6.1.4.1.3902.1082.10.1.2.4.1.34
The card last reset reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	buttonReset(1), powerOff(2), cliOperation(3), snmpOperation(4), mainStandbySwitch(5), hardwareCauses(6), softwareCauses(7)

zxAnCardCpuInfo		1.3.6.1.4.1.3902.1082.10.1.2.4.1.35
The CPU information of the card. Empty string means the card has no this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnCardChipsetType		1.3.6.1.4.1.3902.1082.10.1.2.4.1.36
The chipset type of the card.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	switch(1), ponMac(2)

zxAnCardChipsetInfo		1.3.6.1.4.1.3902.1082.10.1.2.4.1.37
The chipset information of the card. Empty string means the card has no this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnCardOperatorCode		1.3.6.1.4.1.3902.1082.10.1.2.4.1.38
The operator code of the card. Empty string means the attribute of the card is unconfigured.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnCardSubCardName		1.3.6.1.4.1.3902.1082.10.1.2.4.1.39
The clock sub card on main board.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..16)

zxAnCardResetTimes		1.3.6.1.4.1.3902.1082.10.1.2.4.1.40
The resetting times of the card.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnCardResetTimesClear		1.3.6.1.4.1.3902.1082.10.1.2.4.1.41
Clear the resetting times of the card. When get this variable, always return 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	clear(1)

zxAnCardName		1.3.6.1.4.1.3902.1082.10.1.2.4.1.42
The name of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

zxAnCardMachineId		1.3.6.1.4.1.3902.1082.10.1.2.4.1.43
The machine ID of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..16)

zxAnCardRowStatus		1.3.6.1.4.1.3902.1082.10.1.2.4.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnExampleFunc2Xxx1Var1 and zxAnExampleFunc2Xxx1Var2 have been set. To delete a row in this table, a manager must sets this object to destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnCardHisMinPerfTable		1.3.6.1.4.1.3902.1082.10.1.2.51
The 5 minutes or 15 minutes interval performance data table of card.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnCardHisMinPerfEntry

zxAnCardHisMinPerfEntry		1.3.6.1.4.1.3902.1082.10.1.2.51.1
The 5 minutes or 15 minutes interval performance data entry of card.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnCardHisMinPerfEntry

zxAnCardHisMinIntervalNo		1.3.6.1.4.1.3902.1082.10.1.2.51.1.1
The performance data interval number. 1 means the the most recent previous interval; If the performance collection interval is 5 minutes, intervals 2..288 are optional. If the performance collection interval is 15 minutes, intervals 2..96 are optional.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..288

zxAnCardHisMinIntervalValidData		1.3.6.1.4.1.3902.1082.10.1.2.51.1.2
Performance data validity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

zxAnCardHisMinDateTime		1.3.6.1.4.1.3902.1082.10.1.2.51.1.3
The 5 minutes or 15 minutes interval performance data generation time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zxAnCardHisMinCpuLoad		1.3.6.1.4.1.3902.1082.10.1.2.51.1.4
The average CPU load of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

zxAnCardHisMinMemUsage		1.3.6.1.4.1.3902.1082.10.1.2.51.1.5
The average memory usage of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

zxAnCardBladeTable		1.3.6.1.4.1.3902.1082.10.1.2.8
The card blade table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnCardBladeEntry

zxAnCardBladeEntry		1.3.6.1.4.1.3902.1082.10.1.2.8.1
An entry in zxAnCardBladeTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnCardBladeEntry

zxAnCardBladeAdminStatus		1.3.6.1.4.1.3902.1082.10.1.2.8.1.1
The administrative status of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	powerOn(1), powerOffForce(2), powerOffGrace(3), resetForce(4), resetGrace(5)

zxAnCardBladeOperStatus		1.3.6.1.4.1.3902.1082.10.1.2.8.1.2
The operational status of the card blade.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	poweredOn(1), poweredOff(2), unknown(255)

zxAnCardBladeIpv4Address		1.3.6.1.4.1.3902.1082.10.1.2.8.1.3
The IPv4 address of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

zxAnCardBladeIpv4AddrSubnetMask		1.3.6.1.4.1.3902.1082.10.1.2.8.1.4
The IPv4 address subnet mask of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

zxAnCardBladeIpv4AddrGateway		1.3.6.1.4.1.3902.1082.10.1.2.8.1.5
The IPv4 gateway of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

zxAnCardBladeIpv6Address		1.3.6.1.4.1.3902.1082.10.1.2.8.1.6
The IPv6 address of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

zxAnCardBladeIpv6AddrPfxLen		1.3.6.1.4.1.3902.1082.10.1.2.8.1.7
The IPv6 address subnet prefix length of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressPrefixLength

zxAnCardBladeIpv6AddrGateway		1.3.6.1.4.1.3902.1082.10.1.2.8.1.8
The IPv6 gateway of the card blade.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

zxAnChassisCtrlCardSwappedAlm		1.3.6.1.4.1.3902.1082.10.1.3.1.2
A zxAnChassisCtrlCardSwappedAlm trap indicates that the main control card has swapped to slave card.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCtrlCardSwappedClr		1.3.6.1.4.1.3902.1082.10.1.3.1.3
A zxAnChassisCtrlCardSwappedClr trap indicates that the main control card swapped trap has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardOffline		1.3.6.1.4.1.3902.1082.10.1.3.2.1
A zxAnChassisCardOffline trap is sent when the agent has detected that the configured card has plugged out.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardOnline		1.3.6.1.4.1.3902.1082.10.1.3.2.2
A zxAnChassisCardOnline trap is sent when the agent has detected that the configured card has plugged in.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardTypeMismatchAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.3
A zxAnChassisCardTypeMismatchAlm trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActualType.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardTypeMismatchClr		1.3.6.1.4.1.3902.1082.10.1.3.2.4
A zxAnChassisCardTypeMismatchClr trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActualType.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardNotRunningAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.5
A zxAnChassisCardNotRunningAlm trap is sent when the agent has detected that the card has plugged in and configured, but it is not running.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardNotRunningClr		1.3.6.1.4.1.3902.1082.10.1.3.2.6
A zxAnChassisCardNotRunningClr trap is sent when the agent has detected that the card is inservice.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardNotConfiguredAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.7
A zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardNotConfiguredClr		1.3.6.1.4.1.3902.1082.10.1.3.2.8
A zxAnChassisCardNotConfiguredClr trap is sent when the agent has detected that the card has plugged in and configured.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardRstBtnAbnormalAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.9
A zxAnChassisCardRstBtnAbnormalAlm trap is sent when the agent has detected that the reset button of the card is abnormal.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardRstBtnAbnormalClr		1.3.6.1.4.1.3902.1082.10.1.3.2.10
A zxAnChassisCardRstBtnAbnormalClr trap is sent when the agent has detected that the reset button of the card is normal.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardCpuOverloadAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.20
It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThreshhold.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardCpuOverloadClr		1.3.6.1.4.1.3902.1082.10.1.3.2.21
It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThreshhold.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardMemOverloadAlm		1.3.6.1.4.1.3902.1082.10.1.3.2.22
It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageThreshhold.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardMemOverloadClr		1.3.6.1.4.1.3902.1082.10.1.3.2.23
It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageThreshhold.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardResourceAdded		1.3.6.1.4.1.3902.1082.10.1.3.2.24
A zxAnChassisCardResourceAdded trap is sent when the agent has detected that the card has come into inService status.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisCardResourceDeleted		1.3.6.1.4.1.3902.1082.10.1.3.2.25
A zxAnChassisCardResourceDeleted trap is sent when the agent has detected that the card has been deleted.
Status: current	Access: read-write
NOTIFICATION-TYPE

zxAnChassisConformance		1.3.6.1.4.1.3902.1082.10.1.4
OBJECT IDENTIFIER

zxAnChassisCompliances		1.3.6.1.4.1.3902.1082.10.1.4.1
OBJECT IDENTIFIER

zxAnChassisGroups		1.3.6.1.4.1.3902.1082.10.1.4.2
OBJECT IDENTIFIER

zxAnChassisCompliance		1.3.6.1.4.1.3902.1082.10.1.4.1.1
The compliance statement for SNMP entities which implement the ZTE-AN-CHASSIS-MIB.
Status: current	Access: read-write
MODULE-COMPLIANCE

zxAnChassisSysMgmtGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.1
The notifications which indicate reboot,set-pnp and last reboot or swap reason.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisRackMgmtGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.2
The collection of objects which are used to represent rack information and to manage rack.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisShelfMgmtGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.3
The collection of objects which are used to represent shelf information and to manage shelf.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisCardMgmtGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.4
The collection of objects which are used to represent card information and to manage card.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisSubCardMgmtGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.5
The collection of objects which are used to represent subcard information and to manage subcard.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisSysTrapsGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.6
The notifications which indicate swap information.
Status: current	Access: read-write
OBJECT-GROUP

zxAnChassisCardTrapsGroup		1.3.6.1.4.1.3902.1082.10.1.4.2.7
The notifications which indicate specific changes, include card status, card cpu load status and memory load status.
Status: current	Access: read-write
OBJECT-GROUP