ZHONE-GEN-INTERFACE-CONFIG-MIB

File: ZHONE-GEN-INTERFACE-CONFIG-MIB.mib (7952 bytes)

Imported modules

IF-MIB SNMPv2-SMI SNMPv2-TC
Zhone Zhone-TC

Imported symbols

ifIndex Integer32 OBJECT-TYPE
MODULE-IDENTITY OBJECT-IDENTITY NOTIFICATION-TYPE
TruthValue zhoneInterfaceConfig zhoneModules
ZhoneAlarmSeverity ZhoneRowStatus

Defined Types

AlarmConfigEntry  
SEQUENCE    
  alarmConfigBitRateThreshold TruthValue
  alarmConfigBitRateThresholdValue Integer32
  alarmConfigBitRateThresholdHoldtime Integer32
  alarmConfigStatusTrap TruthValue
  alarmConfigAdminUp TruthValue
  alarmConfigAlarmSeverity ZhoneAlarmSeverity
  alarmConfigRowStatus ZhoneRowStatus

Defined Values

alarmConfigMib 1.3.6.1.4.1.5504.3.13.1
Description.
MODULE-IDENTITY    

alarmConfigTable 1.3.6.1.4.1.5504.3.13.1.1
The alarm configuration table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlarmConfigEntry

alarmConfigEntry 1.3.6.1.4.1.5504.3.13.1.1.1
An entry in the alarm configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlarmConfigEntry  

alarmConfigBitRateThreshold 1.3.6.1.4.1.5504.3.13.1.1.1.1
This field describes the enable status of the Bit Rate Threshold Alarm. If this field is true (1) then the Bit Rate Threshold alarm is enabled. If this field is false (2) then the Bit Rate Threshold Alarm is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

alarmConfigBitRateThresholdValue 1.3.6.1.4.1.5504.3.13.1.1.1.2
This field indicates the Bit Rate Threshold Value which will generate an alarm if the Bit Rate Threshold Alarm is enabled and the Bit Rate of this ifIndex drops below this value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

alarmConfigBitRateThresholdHoldtime 1.3.6.1.4.1.5504.3.13.1.1.1.3
This field indicates the Bit Rate Threshold Holdtime in seconds for which the Bit Rate of the ifIndex must remain below the Bit Rate Threshold Value before an alarm will be generated if the Bit Rate Threshold Alarm is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

alarmConfigStatusTrap 1.3.6.1.4.1.5504.3.13.1.1.1.4
This field describes the enable status of the Status Trap Alarm. If this field is true (1) then the Status Trap alarm is enabled. If this field is false (2) then the Status Trap Alarm is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

alarmConfigAdminUp 1.3.6.1.4.1.5504.3.13.1.1.1.5
This field describes the enable status of the Admin Up Alarm. If this field is true (1) then the Admin Up alarm is enabled. If this field is false (2) then the Admin Up Alarm is disabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

alarmConfigAlarmSeverity 1.3.6.1.4.1.5504.3.13.1.1.1.6
This object is used to override Trap, Central Alarm Manager and CLI 'LineAlarm' severity levels for the specified interface.
Status: current Access: read-create
OBJECT-TYPE    
  ZhoneAlarmSeverity  

alarmConfigRowStatus 1.3.6.1.4.1.5504.3.13.1.1.1.7
This object is used to create, delete or modify a row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  ZhoneRowStatus  

alarmConfigTraps 1.3.6.1.4.1.5504.3.13.1.2
OBJECT IDENTIFIER    

alarmConfigTrapPrefix 1.3.6.1.4.1.5504.3.13.1.2.0
Description.
Status: current Access: read-create
OBJECT-IDENTITY    

zhoneAlarmConfigThresholdTrap 1.3.6.1.4.1.5504.3.13.1.2.0.1
This Trap is generated when this ifIndex bandwidth drops below the alarmConfigBitRateThresholdValue for the time specified in alarmConfigBitRateThesholdHoldtime.
Status: current Access: read-create
NOTIFICATION-TYPE    

zhoneAlarmConfigThresholdClearTrap 1.3.6.1.4.1.5504.3.13.1.2.0.2
This trap is generated when this ifIndex bandwidth goes above the alarmConfigBitRateThresholdValue for the time specified in alarmConfigBitRateThresholdHoldtime.
Status: current Access: read-create
NOTIFICATION-TYPE