ZHNWIRELESS
File:
ZHNWIRELESS.mib (53886 bytes)
Imported modules
Imported symbols
Defined Types
| WlChannelSelections |
|
| Broadcast channel selections. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), auto(14) |
|
| WlMimoNEwcModes |
|
| 802.11n MIMO EWC modes of operation. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
auto(1), disabled(2) |
|
| WlMimoNRates |
|
| Supported 802.11n MIMO rates, in Mbps. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
auto(1), use54g(2), rate6Dot5M(3), rate13M(4), rate19Dot5M(5), rate26M(6), rate39M(7), rate52M(8), rate58Dot5M(9), rate65M(10), rate78M(11), rate104M(12), rate117M(13), rate130M(14) |
|
| Wl54gMulticastRates |
|
| Supported 802.11g and multicast rates, in Mbps. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12), auto(13) |
|
| WlBasicRates |
|
| Supported basic 802.11b/g rates, in Mbps. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
default(1), all(2), rate1And2(3), stdRates(4) |
|
| WlWepModes |
|
| WEP mode. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|
| WlWpaModes |
|
| WPA Mode |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
tkip(1), aes(2), tkipAes(3) |
|
| WlAuthenticationModes |
|
| WPA Mode |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9) |
|
| WlSecurityKeyCodes |
|
| WEP Encryption strength code |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
bit64(1), bit128(2) |
|
| WlMACFilterModes |
|
| MAC Filter Modes |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
allow(1), deny(2), disable(3) |
|
| WlBridgeAPModes |
|
| Wireless Bridge Modes of operation |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
accessPoint(1), wirelessBridge(2) |
|
| WlBridgeRestrictModes |
|
| Wireless Bridge Restriction Modes of operation |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
enable(1), enableScan(2), disable(3) |
|
| WlCountryCodes |
|
| Two-character country code:
AF -- AFGHANISTAN
AL -- ALBANIA
DZ -- ALGERIA
AS -- AMERICAN SAMOA
AO -- ANGOLA
AI -- ANGUILLA
AG -- ANTIGUA AND BARBUDA
AR -- ARGENTINA
AM -- ARMENIA
AW -- ARUBA
AU -- AUSTRALIA
AT -- AUSTRIA
AZ -- AZERBAIJAN
BS -- BAHAMAS
BH -- BAHRAIN
BD -- BANGLADESH
BB -- BARBADOS
BY -- BELARUS
BE -- BELGIUM
BZ -- BELIZE
BJ -- BENIN
BM -- BERMUDA
BT -- BHUTAN
BO -- BOLIVIA
BA -- BOSNIA AND HERZEGOVINA
BW -- BOTSWANA
BR -- BRAZIL
IO -- BRITISH INDIAN OCEAN TERRITORY
BN -- BRUNEI DARUSSALAM
BG -- BULGARIA
BF -- BURKINA FASO
BI -- BURUNDI
KH -- CAMBODIA
CM -- CAMEROON
CA -- CANADA
CV -- CAPE VERDE
KY -- CAYMAN ISLANDS
CF -- CENTRAL AFRICAN REPUBLIC
TD -- CHAD
CL -- CHILE
CN -- CHINA
CX -- CHRISTMAS ISLAND
CO -- COLOMBIA
KM -- COMOROS
CG -- CONGO
CD -- CONGO, THE DEMOCRATIC REPUBLIC OF THE
CR -- COSTA RICA
CI -- COTE D'IVOIRE
HR -- CROATIA
CU -- CUBA
CY -- CYPRUS
CZ -- CZECH REPUBLIC
DK -- DENMARK
DJ -- DJIBOUTI
DM -- DOMINICA
DO -- DOMINICAN REPUBLIC
EC -- ECUADOR
EG -- EGYPT
SV -- EL SALVADOR
GQ -- EQUATORIAL GUINEA
ER -- ERITREA
EE -- ESTONIA
ET -- ETHIOPIA
FK -- FALKLAND ISLANDS (MALVINAS)
FO -- FAROE ISLANDS
FJ -- FIJI
FI -- FINLAND
FR -- FRANCE
GF -- FRENCH GUIANA
PF -- FRENCH POLYNESIA
TF -- FRENCH SOUTHERN TERRITORIES
GA -- GABON
GM -- GAMBIA
GE -- GEORGIA
GH -- GHANA
GI -- GIBRALTAR
DE -- GERMANY
GR -- GREECE
GD -- GRENADA
GP -- GUADELOUPE
GU -- GUAM
GT -- GUATEMALA
GG -- GUERNSEY
GN -- GUINEA
GW -- GUINEA-BISSAU
GY -- GUYANA
HT -- HAITI
VA -- HOLY SEE (VATICAN CITY STATE)
HN -- HONDURAS
HK -- HONG KONG
HU -- HUNGARY
IS -- ICELAND
IN -- INDIA
ID -- INDONESIA
IQ -- IRAQ
IE -- IRELAND
IL -- ISRAEL
IT -- ITALY
JM -- JAMAICA
JP -- JAPAN
JE -- JERSEY
JO -- JORDAN
KZ -- KAZAKHSTAN
KE -- KENYA
KI -- KIRIBATI
KR -- KOREA, REPUBLIC OF
KW -- KUWAIT
KG -- KYRGYZSTAN
LA -- LAO PEOPLE'S DEMOCRATIC REPUBLIC
LV -- LATVIA
LB -- LEBANON
LS -- LESOTHO
LR -- LIBERIA
LY -- LIBYAN ARAB JAMAHIRIYA
LI -- LIECHTENSTEIN
LT -- LITHUANIA
LU -- LUXEMBOURG
MK -- MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF
MG -- MADAGASCAR
MW -- MALAWI
MO -- MACAO
MY -- MALAYSIA
MV -- MALDIVES
ML -- MALI
MT -- MALTA
IM -- MAN, ISLE OF
MQ -- MARTINIQUE
MR -- MAURITANIA
MU -- MAURITIUS
YT -- MAYOTTE
MX -- MEXICO
FM -- MICRONESIA, FEDERATED STATES OF
MD -- MOLDOVA, REPUBLIC OF
MC -- MONACO
MN -- MONGOLIA
ME -- MONTENEGRO
MS -- MONTSERRAT
MA -- MOROCCO
MZ -- MOZAMBIQUE
MM -- MYANMAR
NA -- NAMIBIA
NR -- NAURU
NP -- NEPAL
NL -- NETHERLANDS
AN -- NETHERLANDS ANTILLES
NC -- NEW CALEDONIA
NZ -- NEW ZEALAND
NI -- NICARAGUA
NE -- NIGER
NG -- NIGERIA
NU -- NIUE
NF -- NORFOLK ISLAND
MP -- NORTHERN MARIANA ISLANDS
NO -- NORWAY
OM -- OMAN
PK -- PAKISTAN
PW -- PALAU
PA -- PANAMA
PG -- PAPUA NEW GUINEA
PY -- PARAGUAY
PE -- PERU
PH -- PHILIPPINES
PL -- POLAND
PT -- PORTUGAL
PR -- PUERTO RICO
QA -- QATAR
RE -- REUNION
RO -- ROMANIA
RW -- RWANDA
KN -- SAINT KITTS AND NEVIS
LC -- SAINT LUCIA
RU -- RUSSIAN FEDERATION
PM -- SAINT PIERRE AND MIQUELON
VC -- SAINT VINCENT AND THE GRENADINES
WS -- SAMOA
SM -- SAN MARINO
ST -- SAO TOME AND PRINCIPE
SA -- SAUDI ARABIA
SN -- SENEGAL
RS -- SERBIA
SC -- SEYCHELLES
SL -- SIERRA LEONE
SG -- SINGAPORE
SK -- SLOVAKIA
SI -- SLOVENIA
SB -- SOLOMON ISLANDS
SO -- SOMALIA
ZA -- SOUTH AFRICA
ES -- SPAIN
LK -- SRI LANKA
SR -- SURINAME
SZ -- SWAZILAND
SE -- SWEDEN
CH -- SWITZERLAND
TW -- TAIWAN, PROVINCE OF CHINA
TJ -- TAJIKISTAN
TZ -- TANZANIA, UNITED REPUBLIC OF
TH -- THAILAND
TG -- TOGO
TO -- TONGA
TT -- TRINIDAD AND TOBAGO
TN -- TUNISIA
TR -- TURKEY
TM -- TURKMENISTAN
TC -- TURKS AND CAICOS ISLANDS
TV -- TUVALU
UG -- UGANDA
UA -- UKRAINE
AE -- UNITED ARAB EMIRATES
GB -- UNITED KINGDOM
US -- UNITED STATES
UM -- UNITED STATES MINOR OUTLYING ISLANDS
UY -- URUGUAY
UZ -- UZBEKISTAN
VU -- VANUATU
VE -- VENEZUELA
VN -- VIET NAM
VG -- VIRGIN ISLANDS, BRITISH
VI -- VIRGIN ISLANDS, U.S.
WF -- WALLIS AND FUTUNA
EH -- WESTERN SAHARA
YE -- YEMEN
ZM -- ZAMBIA
ZW -- ZIMBABWE
|
| TEXTUAL-CONVENTION |
|
|
|
| |
OCTET STRING |
Size(2) |
|
| WlWpsAddClientMethod |
|
| WPS Add Client Method |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
pushButton(1), accessPointPIN(2), stationPIN(3) |
|
| WlBaseCfgEntry |
|
| SEQUENCE |
|
|
|
| |
wlBaseCfgIndex |
Unsigned32 |
|
| |
wlBaseCfgEnable |
TruthValue |
|
| |
wlBaseCfgBand |
OCTET STRING |
|
| |
wlBaseCfgChannel |
WlChannelSelections |
|
| |
wlBaseCfgCurrentChannel |
WlChannelSelections |
|
| |
wlBaseCfgBandwidth |
OCTET STRING |
|
| |
wlBaseCfgAutoScanTimer |
Unsigned32 |
|
| |
wlBaseCfgMimoNEwc |
WlMimoNEwcModes |
|
| |
wlBaseCfgMimoNRate |
WlMimoNRates |
|
| |
wlBaseCfgMimoNProtection |
WlMimoNProtectionModes |
|
| |
wlBaseCfgNClientsOnly |
TruthValue |
|
| |
wlBaseCfg54gRate |
Wl54gMulticastRates |
|
| |
wlBaseCfgMulticastRate |
Wl54gMulticastRates |
|
| |
wlBaseCfgBasicRate |
WlBasicRates |
|
| |
wlBaseCfgFragThreshold |
Unsigned32 |
|
| |
wlBaseCfgRTSThreshold |
Unsigned32 |
|
| |
wlBaseCfgDTIMInterval |
Unsigned32 |
|
| |
wlBaseCfgBeaconInterval |
Unsigned32 |
|
| |
wlBaseCfgGlobalMaxClients |
Unsigned32 |
|
| |
wlBaseCfgXPress |
TruthValue |
|
| |
wlBaseCfgTxPowerPercent |
Unsigned32 |
|
| |
wlBaseCfgWMMEnable |
TruthValue |
|
| |
wlBaseCfgWMMNoAck |
TruthValue |
|
| |
wlBaseCfgWMMApsd |
TruthValue |
|
| |
wlBaseCfgWpsAddClientMethod |
WlWpsAddClientMethod |
|
| |
wlBaseCfgWpsApMode |
TruthValue |
|
| |
wlBaseCfgWpsConfigAp |
TruthValue |
|
| |
wlBaseCfgWpsDevicePIN |
OCTET STRING |
|
| |
wlBaseCfgWpsAddEnrollee |
TruthValue |
|
| |
wlBaseCfgWpsStationPIN |
OCTET STRING |
|
| |
wlBaseCfgBridgeRestrictMode |
WlBridgeRestrictModes |
|
| |
wlBaseCfgBridgeRefresh |
TruthValue |
|
| WlVirtualIntfEntry |
|
| SEQUENCE |
|
|
|
| |
wlVirtualIndex |
Unsigned32 |
|
| |
wlVirtualHide |
TruthValue |
|
| |
wlVirtualAPIsolation |
TruthValue |
|
| |
wlVirtualDisableWme |
TruthValue |
|
| |
wlVirtualEnableWmf |
TruthValue |
|
| |
wlVirtualSsid |
OCTET STRING |
|
| |
wlVirtualBssMacAddr |
MacAddress |
|
| |
wlVirtualCountryCode |
WlCountryCodes |
|
| |
wlVirtualMaxClients |
Unsigned32 |
|
| |
wlVirtualEnable |
TruthValue |
|
| WlSecurityEntry |
|
| SEQUENCE |
|
|
|
| |
wlSecuritySsid |
OCTET STRING |
|
| |
wlSecurityWps |
TruthValue |
|
| |
wlSecurityAuthMode |
WlAuthenticationModes |
|
| |
wlSecurityWpaPsk |
OCTET STRING |
|
| |
wlSecurityWpaGTKRekey |
Unsigned32 |
|
| |
wlSecurityWpaMode |
WlWpaModes |
|
| |
wlSecurityWepStatus |
WlWepModes |
|
| |
wlSecurityRadiusServerIP |
IpAddress |
|
| |
wlSecurityRadiusPort |
Unsigned32 |
|
| |
wlSecurityRadiusKey |
OCTET STRING |
|
| |
wlSecurityWepKey |
WlSecurityKeyCodes |
|
| |
wlSecurityCurrentWepKeyIndex64 |
Unsigned32 |
|
| |
wlSecurityCurrentWepKeyIndex128 |
Unsigned32 |
|
| |
wlSecurityWep64Key1 |
OCTET STRING |
|
| |
wlSecurityWep64Key2 |
OCTET STRING |
|
| |
wlSecurityWep64Key3 |
OCTET STRING |
|
| |
wlSecurityWep64Key4 |
OCTET STRING |
|
| |
wlSecurityWep128Key1 |
OCTET STRING |
|
| |
wlSecurityWep128Key2 |
OCTET STRING |
|
| |
wlSecurityWep128Key3 |
OCTET STRING |
|
| |
wlSecurityWep128Key4 |
OCTET STRING |
|
| |
wlSecurityWpa2Preauth |
TruthValue |
|
| |
wlSecurityWpa2NetReauth |
Unsigned32 |
|
| |
wlSecurityMACFilterMode |
WlMACFilterModes |
|
| WlMACFilterEntry |
|
| SEQUENCE |
|
|
|
| |
wlMACFilterIndex |
Unsigned32 |
|
| |
wlMACFilterSsid |
OCTET STRING |
|
| |
wlMACFilterMacAddr |
MacAddress |
|
| |
wlMACFilterIfName |
OCTET STRING |
|
| |
wlMACFilterRowStatus |
ZhoneRowStatus |
|
| WlStaticWdsMACAddrEntry |
|
| SEQUENCE |
|
|
|
| |
wlStaticWdsMACIndex |
Unsigned32 |
|
| |
wlStaticWdsRemoteMACAddr |
MacAddress |
|
| WlScanWdsMACAddrEntry |
|
| SEQUENCE |
|
|
|
| |
wlScanWdsMACIndex |
Unsigned32 |
|
| |
wlScanWdsRemoteMACAddr |
MacAddress |
|
| WlAuthStationsEntry |
|
| SEQUENCE |
|
|
|
| |
wlAuthStationIndex |
Unsigned32 |
|
| |
wlAuthStationMACAddr |
MacAddress |
|
| |
wlAuthStationAssociationStatus |
TruthValue |
|
| |
wlAuthStationAuthorizationStatus |
TruthValue |
|
| |
wlAuthStationSSID |
OCTET STRING |
|
| |
wlAuthStationInterface |
OCTET STRING |
|
Defined Values
| zhnWireless |
1.3.6.1.4.1.5504.2.5.46 |
| This file defines the private Enterprise MIB extensions
that define Wireless configuration and status objects
supported by the Zhone ZNID CPEs. |
| MODULE-IDENTITY |
|
|
|
| wlBaseCfgTable |
1.3.6.1.4.1.5504.2.5.46.1.1 |
| Table of basic Wireless Adapter Configuration objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlBaseCfgEntry |
|
| wlBaseCfgEntry |
1.3.6.1.4.1.5504.2.5.46.1.1.1 |
| Table of entries of basic Wireless Adapter Configuration objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlBaseCfgEntry |
|
|
| wlBaseCfgIndex |
1.3.6.1.4.1.5504.2.5.46.1.1.1.1 |
| Basic wireless adapter interface index. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgEnable |
1.3.6.1.4.1.5504.2.5.46.1.1.1.2 |
| Enable or disable the wireless adapter. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgBand |
1.3.6.1.4.1.5504.2.5.46.1.1.1.3 |
| Broadcast band (e.g. 2.4GHz operation). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wlBaseCfgChannel |
1.3.6.1.4.1.5504.2.5.46.1.1.1.4 |
| The configured wifi channel number or 'auto' for
automatic selection of a channel with low interference. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlChannelSelections |
|
|
| wlBaseCfgBandwidth |
1.3.6.1.4.1.5504.2.5.46.1.1.1.6 |
| Aggregate radio bandwidth. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wlBaseCfgAutoScanTimer |
1.3.6.1.4.1.5504.2.5.46.1.1.1.7 |
| When configured for auto mode, this timer value specifies how
often to re-analyze the spectrum to select a low interference
channel. Note: auto channel rescan will only occur when there
are no actively connected devices. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgMimoNEwc |
1.3.6.1.4.1.5504.2.5.46.1.1.1.8 |
| Radio 802.11n Enhanced Wireless Consortium (EWC) mode:
auto(1)
disable(2)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlMimoNEwcModes |
|
|
| wlBaseCfgMimoNRate |
1.3.6.1.4.1.5504.2.5.46.1.1.1.9 |
| The configured Multiple Input Multiple Output (MIMO) 802.11n rate.
Enumeration of:
auto(1),
use54g(2),
rate6Dot5(3),
rate13(4),
rate19Dot5(5),
rate26(6),
rate39(7),
rate52(8),
rate58Dot5(9),
rate65(10),
rate78(11),
rate104(12),
rate117(13),
rate130(14)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlMimoNRates |
|
|
| wlBaseCfgNClientsOnly |
1.3.6.1.4.1.5504.2.5.46.1.1.1.11 |
| Enable or disable the restriction of access to 802.11n
clients, only. When enabled, prevent 802.11b/g clients
from connecting. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfg54gRate |
1.3.6.1.4.1.5504.2.5.46.1.1.1.12 |
| The rate when the radio is operating in 802.11g mode. This
object only applies when the Multiple Input Multiple Output
(MIMO) 802.11n Rate is set to use54g(2). Enumeration of:
rate1M(1),
rate2M(2),
rate5Dot5M(3),
rate6M(4),
rate9M(5),
rate11M(6),
rate12M(7),
rate18M(8),
rate24M(9),
rate36M(10),
rate48M(11),
rate54M(12)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Wl54gMulticastRates |
|
|
| wlBaseCfgMulticastRate |
1.3.6.1.4.1.5504.2.5.46.1.1.1.13 |
| The rate for multicast traffic. Enumeration of:
rate1M(1),
rate2M(2),
rate5Dot5M(3),
rate6M(4),
rate9M(5),
rate11M(6),
rate12M(7),
rate18M(8),
rate24M(9),
rate36M(10),
rate48M(11),
rate54M(12)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Wl54gMulticastRates |
|
|
| wlBaseCfgBasicRate |
1.3.6.1.4.1.5504.2.5.46.1.1.1.14 |
| The rate when the radio is operating in basic 802.11b/g mode.
Enumeration of:
default(1), -- use the factory defaulted basic rate
all(2), -- allow all supported basic rates
rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps
stdRates(4) -- restrict the basic rates to the standard rates of
-- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbps
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlBasicRates |
|
|
| wlBaseCfgFragThreshold |
1.3.6.1.4.1.5504.2.5.46.1.1.1.15 |
| The threshold at which packets are fragmented. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgRTSThreshold |
1.3.6.1.4.1.5504.2.5.46.1.1.1.16 |
| The packet size of a request-to-send (RTS) transmission. A low
threshold implies RTS packets are sent more frequently, thus
requiring more bandwidth but ensuring packet transmission on
a busy network. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgDTIMInterval |
1.3.6.1.4.1.5504.2.5.46.1.1.1.17 |
| The interval at which Delivery Traffic Indication Messages (DTIM)
are generated. A DTIM message notifies a wireless client that
a packet is waiting for tranmission. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgGlobalMaxClients |
1.3.6.1.4.1.5504.2.5.46.1.1.1.19 |
| The maximum number of wireless client devices that may be simultaneously
connected to the radio. This value should include the sum total of all
clients on all active SSIDs. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgXPress |
1.3.6.1.4.1.5504.2.5.46.1.1.1.20 |
| Enable or disable the XPress(TM) Technology. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgTxPowerPercent |
1.3.6.1.4.1.5504.2.5.46.1.1.1.21 |
| The percentage of total power that should be used for data transmissions. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlBaseCfgWMMEnable |
1.3.6.1.4.1.5504.2.5.46.1.1.1.22 |
| Enable or disable Wifi Multimedia. When set to TRUE, audio,
video and voice application data is prioritized over other network
traffic. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWMMNoAck |
1.3.6.1.4.1.5504.2.5.46.1.1.1.23 |
| Enable or disable the suppression of acknowledgements for frames
that do not require a QOS Acknowledgement. This avoids the unnecessary
transmission of acknowledgements for highly time-critical data. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWMMApsd |
1.3.6.1.4.1.5504.2.5.46.1.1.1.24 |
| Enable or disable the Automatic Power Save Delivery (APSD) power
management method. This feature is useful for bi-directional applications,
such as VoIp phones. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWpsApMode |
1.3.6.1.4.1.5504.2.5.46.1.1.1.26 |
| Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider
is using an external registrar for security, select true(1).
The PIN for AP mode is specified by the registrar. Provide this PIN to the
client. Select wlBaseCfgWpsConfigAp to begin the registration process with
the client. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWpsConfigAp |
1.3.6.1.4.1.5504.2.5.46.1.1.1.27 |
| Start AP configuration. If your provider is using an external registrar
for security, wlBaseCfgWpsApMode then select true(1) to begin the
registration process with the client. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWpsDevicePIN |
1.3.6.1.4.1.5504.2.5.46.1.1.1.28 |
| Device PIN provided by external registrar. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(8) |
|
| wlBaseCfgWpsAddEnrollee |
1.3.6.1.4.1.5504.2.5.46.1.1.1.29 |
| Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for
pushButton(1), then the user must simultaneously push the WPS button
on the rear panel of the wireless zNID and set this object to true(1)
for push button registration on the client device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlBaseCfgWpsStationPIN |
1.3.6.1.4.1.5504.2.5.46.1.1.1.30 |
| Station PIN provided by user. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(8) |
|
| wlBaseCfgBridgeRefresh |
1.3.6.1.4.1.5504.2.5.46.1.1.1.32 |
| Scans for any wireless bridge devices in range and displays them in
the Remote Bridge MAC Address table. Selecting true(1) will update the
wireless bridge devices in range. Wait for a few seconds for the update.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlVirtualIntfTable |
1.3.6.1.4.1.5504.2.5.46.1.2 |
| Table of Wireless Virtual LAN Interface Configuration, Status and Statistics objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlVirtualIntfEntry |
|
| wlVirtualIntfEntry |
1.3.6.1.4.1.5504.2.5.46.1.2.1 |
| Entries in Wireless Vitrual LAN Interface Table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlVirtualIntfEntry |
|
|
| wlVirtualIndex |
1.3.6.1.4.1.5504.2.5.46.1.2.1.1 |
| Basic access point interface index. Guest (or Virtual) access points begin
with index = 2. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlVirtualHide |
1.3.6.1.4.1.5504.2.5.46.1.2.1.2 |
| Enable or disable the suppression of the advertising of the access point's SSID.
If enabled, clients will need to configure the SSID to associate. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlVirtualAPIsolation |
1.3.6.1.4.1.5504.2.5.46.1.2.1.3 |
| Enable or disable the isolation of clients by enabling or disabling secure
forwarding mode. This will preventpreventing one client from sending packets
directly to another client. All packets are forwarded upstream on the WAN
interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlVirtualDisableWme |
1.3.6.1.4.1.5504.2.5.46.1.2.1.4 |
| Enable or disable the Wireless Multi-Media mode. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlVirtualEnableWmf |
1.3.6.1.4.1.5504.2.5.46.1.2.1.5 |
| Enable or disable Wireless Multicast Forwarding. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlVirtualSsid |
1.3.6.1.4.1.5504.2.5.46.1.2.1.6 |
| Configure the Primary SSID assigned to the wl0 interface,
or the Guest SSIDs assigned to the virtual wireless
interfaces. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..72) |
|
| wlVirtualBssMacAddr |
1.3.6.1.4.1.5504.2.5.46.1.2.1.7 |
| MAC Address assigned to the primary SSID. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| wlVirtualCountryCode |
1.3.6.1.4.1.5504.2.5.46.1.2.1.8 |
| Two character country code. The country code is automatically configured
based upon the model number of the unit. All countries with 100mW EIRP
maximum transmit power use the United Kingdom country code. North American
models may use the maximum transmit power of 300mW EIRP. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
WlCountryCodes |
|
|
| wlVirtualMaxClients |
1.3.6.1.4.1.5504.2.5.46.1.2.1.9 |
| Maximum number of client devices that may be simultaneously connected
to this SSID. The maximum clients value assigned to each access points
must not exceed the global maximum clients value. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlVirtualEnable |
1.3.6.1.4.1.5504.2.5.46.1.2.1.10 |
| Enable or disable a single Wireless Virtual LAN Interface |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlSecurityTable |
1.3.6.1.4.1.5504.2.5.46.1.3 |
| Table of Wireless Security Configuration, Status and Statistics objects
for virtual LAN interfaces. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlSecurityEntry |
|
| wlSecurityEntry |
1.3.6.1.4.1.5504.2.5.46.1.3.1 |
| Table of entries, per virtual LAN interface, of Wireless Security objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlSecurityEntry |
|
|
| wlSecuritySsid |
1.3.6.1.4.1.5504.2.5.46.1.3.1.1 |
| The primary SSID assigned to the wl0 interface,
or the Guest SSIDs assigned to this virtual wireless
interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..72) |
|
| wlSecurityWps |
1.3.6.1.4.1.5504.2.5.46.1.3.1.2 |
| Enable or disable WiFi Protected Setup (WPS) security method. If
WPS is disabled, the network authentication method, the data encryption,
and network key should also be configured in order to authenticate to
this wireless network. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlSecurityAuthMode |
1.3.6.1.4.1.5504.2.5.46.1.3.1.3 |
| Configure the network authentication method:
mode8011x(1),
open(2),
shared(3),
wpa(4),
wpa2(5),
wpaPsk(6),
wpa2Psk(7),
mixedWpa2Wpa(8),
mixedWpa2WpaPsk(9)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlAuthenticationModes |
|
|
| wlSecurityWpaPsk |
1.3.6.1.4.1.5504.2.5.46.1.3.1.4 |
| WPA/WPAI Passphrase. This field cannot contain a SPACE and is
returned as a string of asterisks. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..72) |
|
| wlSecurityWpaMode |
1.3.6.1.4.1.5504.2.5.46.1.3.1.6 |
| WPA/WAPI Encryption mode:
tkip(1),
aes(2),
tkipAes(3)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlWpaModes |
|
|
| wlSecurityWepStatus |
1.3.6.1.4.1.5504.2.5.46.1.3.1.7 |
| Status of Wireless Encryption Protocol (WEP) encryption:
disabled(1)
enabled(2)
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlWepModes |
|
|
| wlSecurityRadiusServerIP |
1.3.6.1.4.1.5504.2.5.46.1.3.1.8 |
| IP address of the Remote Authentication Dial In User Server (RADIUS)
used for 802.1x authentication. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| wlSecurityRadiusPort |
1.3.6.1.4.1.5504.2.5.46.1.3.1.9 |
| UDP port to use for accessing the Remote Authentication Dial In User
Server (RADIUS). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..65535 |
|
| wlSecurityRadiusKey |
1.3.6.1.4.1.5504.2.5.46.1.3.1.10 |
| Remote Authentication Dial In User Server (RADIUS) authentication key.
This field cannot contain a SPACE and is returned as a string of asterisks. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..72) |
|
| wlSecurityWep64Key1 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.14 |
| WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(5..10) |
|
| wlSecurityWep64Key2 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.15 |
| WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(5..10) |
|
| wlSecurityWep64Key3 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.16 |
| WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(5..10) |
|
| wlSecurityWep64Key4 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.17 |
| WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters
or 10 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(5..10) |
|
| wlSecurityWep128Key1 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.18 |
| WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(13..26) |
|
| wlSecurityWep128Key2 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.19 |
| WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(13..26) |
|
| wlSecurityWep128Key3 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.20 |
| WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(13..26) |
|
| wlSecurityWep128Key4 |
1.3.6.1.4.1.5504.2.5.46.1.3.1.21 |
| WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters
or 26 hexadecimal digits. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(13..26) |
|
| wlSecurityWpa2Preauth |
1.3.6.1.4.1.5504.2.5.46.1.3.1.22 |
| Enable or disable WPA2 pre-authentication. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| wlSecurityWpa2NetReauth |
1.3.6.1.4.1.5504.2.5.46.1.3.1.23 |
| Configure the WPA2 network re-authentication time, in seconds. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..604800 |
|
| wlSecurityMACFilterMode |
1.3.6.1.4.1.5504.2.5.46.1.3.1.24 |
| Configure the MAC Filter mode. The MAC Filter rules defined in the
wlMACFilterTable will be ignored when this object is set to disable(3). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
WlMACFilterModes |
|
|
| wlMACFilterTable |
1.3.6.1.4.1.5504.2.5.46.1.4 |
| Table of Wireless MAC filter rules for a virtual wireless interface.
The MAC Filter table contains a list of MAC addresses for devices that
are permitted to connect, or prevented from connecting to the wireless
service. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlMACFilterEntry |
|
| wlMACFilterEntry |
1.3.6.1.4.1.5504.2.5.46.1.4.1 |
| Entries in the Wireless MAC filter rules for a virtual wireless interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlMACFilterEntry |
|
|
| wlMACFilterIndex |
1.3.6.1.4.1.5504.2.5.46.1.4.1.1 |
| The Wireless MAC filter table index. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlMACFilterMacAddr |
1.3.6.1.4.1.5504.2.5.46.1.4.1.3 |
| The MAC address which to apply to the filter rule. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| wlMACFilterIfName |
1.3.6.1.4.1.5504.2.5.46.1.4.1.4 |
| The virtual interface name to which this rule applies. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..72) |
|
| wlMACFilterRowStatus |
1.3.6.1.4.1.5504.2.5.46.1.4.1.5 |
| The SNMP RowStatus of the current row. When creating a new
MAC Filter entry for a virtual wireless interface, only the
MAC Address must be specified. The wlVirtualIndex will
be used to determine the SSID and the filter mode to
apply. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
ZhoneRowStatus |
|
|
| wlStaticWdsMACAddrTable |
1.3.6.1.4.1.5504.2.5.46.1.5 |
| Table of statically configured Remote MAC Addresses which are permitted
to bridge to the wireless LAN interfaces when the Bridge restriction mode
is enabled. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlStaticWdsMACAddrEntry |
|
| wlStaticWdsMACAddrEntry |
1.3.6.1.4.1.5504.2.5.46.1.5.1 |
| Table of statically configured Remote MAC Addresses which are permitted
to bridge to the wireless LAN interfaces when the Bridge restriction mode
is enabled. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlStaticWdsMACAddrEntry |
|
|
| wlStaticWdsMACIndex |
1.3.6.1.4.1.5504.2.5.46.1.5.1.1 |
| The index into the static WDS Remote MAC Address table for a wireless LAN
interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlStaticWdsRemoteMACAddr |
1.3.6.1.4.1.5504.2.5.46.1.5.1.2 |
| The MAC address that is permitted WDS bridge access to the wireless LAN
interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| wlScanWdsMACAddrTable |
1.3.6.1.4.1.5504.2.5.46.1.6 |
| Table of scanned Remote MAC Addresses which are permitted to
bridge to the wireless LAN interfaces when the Bridge restriction
mode is enabled. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlScanWdsMACAddrEntry |
|
| wlScanWdsMACAddrEntry |
1.3.6.1.4.1.5504.2.5.46.1.6.1 |
| Table of scanned Remote MAC Addresses which are permitted to
bridge to the wireless LAN interfaces when the Bridge restriction
mode is enabled. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlScanWdsMACAddrEntry |
|
|
| wlScanWdsMACIndex |
1.3.6.1.4.1.5504.2.5.46.1.6.1.1 |
| The index into the WDS scanned table of Remote MAC Addresses that may
access a wireless LAN interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlScanWdsRemoteMACAddr |
1.3.6.1.4.1.5504.2.5.46.1.6.1.2 |
| The MAC address previously scanned that is permitted WDS bridge access to
the wireless LAN interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| wlAuthStationsTable |
1.3.6.1.4.1.5504.2.5.46.1.7 |
| Table of authenicated wireless stations and their status information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
WlAuthStationsEntry |
|
| wlAuthStationsEntry |
1.3.6.1.4.1.5504.2.5.46.1.7.1 |
| Table of authenicated wireless stations and their status information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
WlAuthStationsEntry |
|
|
| wlAuthStationIndex |
1.3.6.1.4.1.5504.2.5.46.1.7.1.1 |
| The index into the Authentication Stations table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| wlAuthStationMACAddr |
1.3.6.1.4.1.5504.2.5.46.1.7.1.2 |
| The MAC address of the authenticated station. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| wlAuthStationSSID |
1.3.6.1.4.1.5504.2.5.46.1.7.1.5 |
| SSID with which the station has authenticated. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| wlAuthStationInterface |
1.3.6.1.4.1.5504.2.5.46.1.7.1.6 |
| Interface through which the station has authenticated. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| zhnWirelessCompliance |
1.3.6.1.4.1.5504.2.5.46.2.2.1 |
| The Compliance statement for SNMP entities which
manage the Zhone CPE Wireless Configuration, Status and
Statistics Information |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| zhnWlBaseCfgGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.1 |
| A collection of Zhone Wireless objects that describe the WLAN
adapter basic configuration and status information. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlVirtualCfgGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.2 |
| A collection of Zhone Wireless objects that describe the WLAN
virtual interface configuration and status information. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlSecurityGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.3 |
| A collection of Zhone Wireless objects that describe the WLAN
virtual interface security information. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlMACFilterGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.4 |
| A collection of Zhone Wireless objects that describe the WLAN
MAC filter rules. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlStaticWdsMACAddrGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.5 |
| A collection of Zhone Wireless objects that describe the WLAN
statically configured WDS MAC addresses. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlScanWdsMACAddrGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.6 |
| A collection of Zhone Wireless objects that describe the WLAN
WDS Scanned MAC addresses. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| zhnWlAuthStationsGroup |
1.3.6.1.4.1.5504.2.5.46.2.1.7 |
| A collection of Zhone Wireless objects that indentify the
stations that have authenticated with the Access Point. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|