XYLO-CALLMGMT-MIB

File: XYLO-CALLMGMT-MIB.mib (120590 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	RFC-1212
XYLO-WAN-MIB	XYLO-MODEM-MIB	XYLO-MIB-SMI

Imported symbols

Counter	DisplayString	OBJECT-TYPE
anxt1ChanIndex	anxt1ChanNumber	mdmNumber
callmgmt

Defined Types

ActivecallEntry
SEQUENCE
	actcallUsername	DisplayString
	actcallCallingNumber	DisplayString
	actcallCalledNumber	DisplayString
	actcallSPBName	DisplayString
	actcallDeviceType	INTEGER
	actcallDeviceNumber	INTEGER
	actcallSubAddress	DisplayString
	actcallBearer	INTEGER
	actcallSetupTime	INTEGER
	actcallDuration	INTEGER
	actcalllocalin	DisplayString
	actcallremotein	DisplayString
	actcalllocalat	DisplayString
	actcallremoteat	DisplayString
	actcalllocalipx	DisplayString
	actcallremoteipx	DisplayString
	actcallConnectionType	INTEGER
	actcallOctetsRx	Counter
	actcallOctetsTx	Counter
	actcallOrigin	INTEGER
	actcallCallState	INTEGER
	actcallConfiguredType	INTEGER
	actcallOwningBundle	INTEGER

ActCallEntry
SEQUENCE
	activeCallDeviceType	INTEGER
	activeCallDeviceNumber	INTEGER
	activeCallUsername	DisplayString
	activeCallCallingNumber	DisplayString
	activeCallCalledNumber	DisplayString
	activeCallSPBName	DisplayString
	activeCallSubAddress	DisplayString
	activeCallBearer	INTEGER
	activeCallSetupTime	INTEGER
	activeCallDuration	INTEGER
	activeCalllocalin	DisplayString
	activeCallremotein	DisplayString
	activeCalllocalipx	DisplayString
	activeCallremoteipx	DisplayString
	activeCallConnectionType	INTEGER
	activeCallOctetsRx	Counter
	activeCallOctetsTx	Counter
	activeCallOrigin	INTEGER
	activeCallCallState	INTEGER
	activeCallConfiguredType	INTEGER
	activeCallOwningBundle	INTEGER
	activeCallWanIndex	INTEGER
	activeCallChanIndex	INTEGER
	activeCallLocalAt	DisplayString
	activeCallRemoteAt	DisplayString

ActCallAsyEntry
SEQUENCE
	activeCallAsyBeginRxSpeed	INTEGER
	activeCallAsyCurrRxSpeed	INTEGER
	activeCallAsyBeginTxSpeed	INTEGER
	activeCallAsyCurrTxSpeed	INTEGER
	activeCallAsyTxBaudRate	INTEGER
	activeCallAsyRxBaudRate	INTEGER
	activeCallAsyCurrSignalQ	INTEGER
	activeCallAsyBeginRxLineLevel	INTEGER
	activeCallAsyCurrRxLineLevel	INTEGER
	activeCallAsyErrorProtocol	INTEGER
	activeCallAsyCompressionProtocol	INTEGER
	activeCallAsyTxPackets	Counter
	activeCallAsyTxPacketError	Counter
	activeCallAsyRxPackets	Counter
	activeCallAsyRxPacketError	Counter
	activeCallAsyRetrainReqSent	Counter
	activeCallAsyRetrainReqReceived	Counter
	activeCallAsyRRNReqReceived	Counter
	activeCallAsyRRNReqSent	Counter
	activeCallAsyRoundTripDelay	INTEGER
	activeCallAsyFarEndEchoFreq	INTEGER
	activeCallAsyFarEndEchoLevel	INTEGER
	activeCallAsyChanFreqOffset	INTEGER
	activeCallAsyOscFreqOffset	INTEGER
	activeCallAsySNR	INTEGER
	activeCallAsyx2Status	INTEGER
	activeCallAsyx2RbsStatus	INTEGER
	activeCallAsyx2DigitalPadStatus	INTEGER
	activeCallAsyk56Status	INTEGER
	activeCallAsyk56RbsStatus	INTEGER
	activeCallAsyk56DigitalPadStatus	INTEGER
	activeCallAsyk56Version	INTEGER
	activeCallAsyWANUnitNumber	INTEGER
	activeCallAsyChannel	INTEGER
	activeCallAsyCurrModulation	INTEGER
	activeCallAsyCurrPumpState	INTEGER
	activeCallAsyx2SpeedReduction	INTEGER
	activeCallAsyk56SpeedReduction	INTEGER
	activeCallAsyV90Status	INTEGER
	activeCallAsyV90ConstellationIndex0	INTEGER
	activeCallAsyV90ConstellationIndex1	INTEGER
	activeCallAsyV90ConstellationIndex2	INTEGER
	activeCallAsyV90ConstellationIndex3	INTEGER
	activeCallAsyV90ConstellationIndex4	INTEGER
	activeCallAsyV90ConstellationIndex5	INTEGER
	activeCallAsyV90PADStatus	INTEGER
	activeCallAsyV90ShapingBits	INTEGER
	activeCallAsyV90LookAhead	INTEGER
	activeCallAsyV90ConstellationPower	INTEGER
	activeCallAsyV90HalfDuplexRRNRx	INTEGER

ActCallTaEntry
SEQUENCE
	activeCallTaSpeed	INTEGER

ActCallSyncEntry
SEQUENCE
	activeCallSyncSpeed	INTEGER

ActCallMpEntry
SEQUENCE
	activeCallMpBundleIdx	INTEGER

CallHistEntry
SEQUENCE
	callHistIndex	INTEGER
	callHistUsername	DisplayString
	callHistCallingNumber	DisplayString
	callHistCalledNumber	DisplayString
	callHistSPBName	DisplayString
	callHistWANUnitNumber	INTEGER
	callHistChannel	INTEGER
	callHistDeviceType	INTEGER
	callHistDeviceNumber	INTEGER
	callHistSubAddress	DisplayString
	callHistBearer	INTEGER
	callHistSetupTime	INTEGER
	callHistDuration	INTEGER
	callHistlocalin	DisplayString
	callHistremotein	DisplayString
	callHistlocalat	DisplayString
	callHistremoteat	DisplayString
	callHistlocalipx	DisplayString
	callHistremoteipx	DisplayString
	callHistConnectionType	INTEGER
	callHistOctetsRx	Counter
	callHistOctetsTx	Counter
	callHistOrigin	INTEGER
	callHistDisconnectReason	INTEGER
	callHistConfiguredType	INTEGER
	callHistCompositeDisconnect	INTEGER
	callHistOwningBundle	INTEGER

CallHistAsyEntry
SEQUENCE
	callHistAsyBeginRxSpeed	INTEGER
	callHistAsyEndRxSpeed	INTEGER
	callHistAsyBeginTxSpeed	INTEGER
	callHistAsyEndTxSpeed	INTEGER
	callHistAsyTxBaudRate	INTEGER
	callHistAsyRxBaudRate	INTEGER
	callHistAsyBeginSignalQ	INTEGER
	callHistAsyEndSignalQ	INTEGER
	callHistAsyBeginRxLineLevel	INTEGER
	callHistAsyEndRxLineLevel	INTEGER
	callHistAsyModulationMode	INTEGER
	callHistAsyErrorProtocol	INTEGER
	callHistAsyCompressionProtocol	INTEGER
	callHistAsyTxPackets	Counter
	callHistAsyTxPacketError	Counter
	callHistAsyRxPackets	Counter
	callHistAsyRxPacketError	Counter
	callHistAsyRetrainReqSent	Counter
	callHistAsyRetrainReqReceived	Counter
	callHistAsyRRNReqReceived	Counter
	callHistAsyRRNReqSent	Counter
	callHistAsyRoundTripDelay	INTEGER
	callHistAsyFarEndEchoFreq	INTEGER
	callHistAsyFarEndEchoLevel	INTEGER
	callHistAsyChanFreqOffset	INTEGER
	callHistAsyOscFreqOffset	INTEGER
	callHistAsySNR	INTEGER
	callHistAsyMdmDisconnectReason	INTEGER
	callHistAsyx2Status	INTEGER
	callHistAsyx2RbsStatus	INTEGER
	callHistAsyx2DigitalPadStatus	INTEGER
	callHistAsyx2Shaping	INTEGER
	callHistAsyk56Status	INTEGER
	callHistAsyk56RbsStatus	INTEGER
	callHistAsyk56DigitalPadStatus	INTEGER
	callHistAsyk56Shaping	INTEGER
	callHistAsyk56Version	INTEGER
	callHistAsySignalQ	INTEGER
	callHistAsyBeginModulation	INTEGER
	callHistAsyEndModulation	INTEGER
	callHistAsyEndPumpState	INTEGER
	callHistAsyx2SpeedReduction	INTEGER
	callHistAsyk56SpeedReduction	INTEGER
	callHistAsyV90Status	INTEGER
	callHistAsyV90ConstellationIndex0	INTEGER
	callHistAsyV90ConstellationIndex1	INTEGER
	callHistAsyV90ConstellationIndex2	INTEGER
	callHistAsyV90ConstellationIndex3	INTEGER
	callHistAsyV90ConstellationIndex4	INTEGER
	callHistAsyV90ConstellationIndex5	INTEGER
	callHistAsyV90PADStatus	INTEGER
	callHistAsyV90ShapingBits	INTEGER
	callHistAsyV90LookAhead	INTEGER
	callHistAsyV90ConstellationPower	INTEGER
	callHistAsyV90HalfDuplexRRNRx	INTEGER

CallHistTaEntry
SEQUENCE
	callHistTaSpeed	INTEGER

CallHistSyncEntry
SEQUENCE
	callHistSyncSpeed	INTEGER

CallHistMpEntry
SEQUENCE
	callHistMpBundleIdx	INTEGER

MdmCallStatEntry
SEQUENCE
	mdmCallStatBeginRxSpeed	INTEGER
	mdmCallStatCurrRxSpeed	INTEGER
	mdmCallStatBeginTxSpeed	INTEGER
	mdmCallStatCurrTxSpeed	INTEGER
	mdmCallStatTxBaudRate	INTEGER
	mdmCallStatRxBaudRate	INTEGER
	mdmCallStatBeginSignalQ	INTEGER
	mdmCallStatCurrSignalQ	INTEGER
	mdmCallStatBeginRxLineLevel	INTEGER
	mdmCallStatCurrRxLineLevel	INTEGER
	mdmCallStatModulationMode	INTEGER
	mdmCallStatErrorProtocol	INTEGER
	mdmCallStatCompressionProtocol	INTEGER
	mdmCallStatTxPackets	Counter
	mdmCallStatTxPacketError	Counter
	mdmCallStatRxPackets	Counter
	mdmCallStatRxPacketError	Counter
	mdmCallStatRetrainReqSent	Counter
	mdmCallStatRetrainReqReceived	Counter
	mdmCallStatRRNReqReceived	Counter
	mdmCallStatRRNReqSent	Counter
	mdmCallStatRoundTripDelay	INTEGER
	mdmCallStatFarEndEchoFreq	INTEGER
	mdmCallStatFarEndEchoLevel	INTEGER
	mdmCallStatChanFreqOffset	INTEGER
	mdmCallStatOscFreqOffset	INTEGER
	mdmCallStatSNR	INTEGER
	mdmCallStatx2Status	INTEGER
	mdmCallStatx2RbsStatus	INTEGER
	mdmCallStatx2DigitalPadStatus	INTEGER
	mdmCallStatx2Shaping	INTEGER
	mdmCallStatk56Status	INTEGER
	mdmCallStatk56RbsStatus	INTEGER
	mdmCallStatk56DigitalPadStatus	INTEGER
	mdmCallStatk56Shaping	INTEGER
	mdmCallStatk56Version	INTEGER
	mdmCallStatWANUnitNumber	INTEGER
	mdmCallStatChannel	INTEGER

PortActionEntry
SEQUENCE
	portActionDeviceType	INTEGER
	portActionDeviceNumber	INTEGER
	portActionResetPort	INTEGER

Defined Values

activecall		1.3.6.1.4.1.15.2.16.1
OBJECT IDENTIFIER

callHist		1.3.6.1.4.1.15.2.16.2
OBJECT IDENTIFIER

mdmCallStatsObjects		1.3.6.1.4.1.15.2.16.3
OBJECT IDENTIFIER

portaction		1.3.6.1.4.1.15.2.16.4
OBJECT IDENTIFIER

activecallTable		1.3.6.1.4.1.15.2.16.1.1
A table of active call information.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActivecallEntry

activecallEntry		1.3.6.1.4.1.15.2.16.1.1.1
A row in the active call table.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	ActivecallEntry

actcallUsername		1.3.6.1.4.1.15.2.16.1.1.1.1
Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

actcallCallingNumber		1.3.6.1.4.1.15.2.16.1.1.1.2
The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

actcallCalledNumber		1.3.6.1.4.1.15.2.16.1.1.1.3
The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

actcallSPBName		1.3.6.1.4.1.15.2.16.1.1.1.4
Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

actcallDeviceType		1.3.6.1.4.1.15.2.16.1.1.1.5
An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. This object obsoletes the callSetupPortType object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	asy(1), syn(9), ta(10), mp(12)

actcallDeviceNumber		1.3.6.1.4.1.15.2.16.1.1.1.6
The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

actcallSubAddress		1.3.6.1.4.1.15.2.16.1.1.1.7
The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

actcallBearer		1.3.6.1.4.1.15.2.16.1.1.1.8
This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	missing(1), voice(2), data(3)

actcallSetupTime		1.3.6.1.4.1.15.2.16.1.1.1.9
The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

actcallDuration		1.3.6.1.4.1.15.2.16.1.1.1.10
Duration of the phone call, in seconds.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

actcalllocalin		1.3.6.1.4.1.15.2.16.1.1.1.11
The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

actcallremotein		1.3.6.1.4.1.15.2.16.1.1.1.12
The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

actcalllocalat		1.3.6.1.4.1.15.2.16.1.1.1.13
The local AppleTalk address assigned to this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

actcallremoteat		1.3.6.1.4.1.15.2.16.1.1.1.14
The remote AppleTalk address assigned to this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

actcalllocalipx		1.3.6.1.4.1.15.2.16.1.1.1.15
The local IPX address assigned to this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

actcallremoteipx		1.3.6.1.4.1.15.2.16.1.1.1.16
The remote IPX address assigned to this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

actcallConnectionType		1.3.6.1.4.1.15.2.16.1.1.1.17
The name of the client routine running on the port at the time of this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16)

actcallOctetsRx		1.3.6.1.4.1.15.2.16.1.1.1.18
The number of octets received during this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

actcallOctetsTx		1.3.6.1.4.1.15.2.16.1.1.1.19
The number of octets transmitted during this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

actcallOrigin		1.3.6.1.4.1.15.2.16.1.1.1.20
The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	incoming(1), outgoing(2)

actcallCallState		1.3.6.1.4.1.15.2.16.1.1.1.21
The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(1), valid(2)

actcallConfiguredType		1.3.6.1.4.1.15.2.16.1.1.1.22
The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19)

actcallOwningBundle		1.3.6.1.4.1.15.2.16.1.1.1.23
The identifier of the MP bundle that owns this PPP link.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

actCallTable		1.3.6.1.4.1.15.2.16.1.2
A table of active call information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActCallEntry

actCallEntry		1.3.6.1.4.1.15.2.16.1.2.1
A row in the active call table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ActCallEntry

activeCallDeviceType		1.3.6.1.4.1.15.2.16.1.2.1.1
An enumerated integer indicating the port type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port. This object obsoletes the callSetupPortType object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	asy(1), syn(9), ta(10), mp(12), vpn(13), gen-sync-port(14)

activeCallDeviceNumber		1.3.6.1.4.1.15.2.16.1.2.1.2
The one-based device (port) number the call is assigned to. This object in conjunction with the object, actcallDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes the callSetupPortNumber object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallUsername		1.3.6.1.4.1.15.2.16.1.2.1.3
Name of the user associated with this call. A null string is returned if the call is active but the current user name cannot be determined at the time of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

activeCallCallingNumber		1.3.6.1.4.1.15.2.16.1.2.1.4
The number from which this call was made. Can be a null string. This object obsoletes the callSetupCallingNbr object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

activeCallCalledNumber		1.3.6.1.4.1.15.2.16.1.2.1.5
The number to which this call was made. Can be a null string. This object obsoletes the callSetupCalledNbr object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

activeCallSPBName		1.3.6.1.4.1.15.2.16.1.2.1.6
Session Parameter Block name. The RAC determines how to handle a call through the SPB. The SPB is defined in the configuration file. When a call comes in, the RAC tries to match the received setup information elements that accompanied the call with the values in the setup criteria section of the defined SPBs. The first SPB that matches the call's setup criteria is used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

activeCallSubAddress		1.3.6.1.4.1.15.2.16.1.2.1.7
The subaddress this call is connected to. Can be a null string. This object obsoletes the callSetupCalledSubAddr object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

activeCallBearer		1.3.6.1.4.1.15.2.16.1.2.1.8
This object defines the bearer capability of the incoming call. This object obsoletes the callSetupBearer object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	missing(1), voice(2), data(3)

activeCallSetupTime		1.3.6.1.4.1.15.2.16.1.2.1.9
The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes callSetupCallingTime.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallDuration		1.3.6.1.4.1.15.2.16.1.2.1.10
Duration of the phone call, in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCalllocalin		1.3.6.1.4.1.15.2.16.1.2.1.11
The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

activeCallremotein		1.3.6.1.4.1.15.2.16.1.2.1.12
The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

activeCalllocalipx		1.3.6.1.4.1.15.2.16.1.2.1.13
The local IPX address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

activeCallremoteipx		1.3.6.1.4.1.15.2.16.1.2.1.14
The remote IPX address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

activeCallConnectionType		1.3.6.1.4.1.15.2.16.1.2.1.15
The name of the client routine running on the port at the time of this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16)

activeCallOctetsRx		1.3.6.1.4.1.15.2.16.1.2.1.16
The number of octets received during this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallOctetsTx		1.3.6.1.4.1.15.2.16.1.2.1.17
The number of octets transmitted during this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallOrigin		1.3.6.1.4.1.15.2.16.1.2.1.18
The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the RAC made the call. This object obsoletes the callSetupCallType object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	incoming(1), outgoing(2)

activeCallCallState		1.3.6.1.4.1.15.2.16.1.2.1.19
The current state of this call. invalid(1)-call is inactive and the contents of this table row are not valid. valid(2)- call is active and contents of this table row are valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(1), valid(2)

activeCallConfiguredType		1.3.6.1.4.1.15.2.16.1.2.1.20
The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19)

activeCallOwningBundle		1.3.6.1.4.1.15.2.16.1.2.1.21
The identifier of the MP bundle that owns this PPP link. This number will always be the same as the mp device number. For example, mp17 devtype will have a owningBundle number of 17
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallWanIndex		1.3.6.1.4.1.15.2.16.1.2.1.22
The wan interface number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallChanIndex		1.3.6.1.4.1.15.2.16.1.2.1.23
The channel number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallLocalAt		1.3.6.1.4.1.15.2.16.1.2.1.24
The local AppleTalk address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

activeCallRemoteAt		1.3.6.1.4.1.15.2.16.1.2.1.25
The remote AppleTalk address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

actCallAsyTable		1.3.6.1.4.1.15.2.16.1.3
A table of modem call statistics indexed by the async device number (which is identical to the modem number)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActCallAsyEntry

actCallAsyEntry		1.3.6.1.4.1.15.2.16.1.3.1
A row in the modem call statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ActCallAsyEntry

activeCallAsyBeginRxSpeed		1.3.6.1.4.1.15.2.16.1.3.1.3
The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

activeCallAsyCurrRxSpeed		1.3.6.1.4.1.15.2.16.1.3.1.4
The current receive connect speed of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

activeCallAsyBeginTxSpeed		1.3.6.1.4.1.15.2.16.1.3.1.5
The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

activeCallAsyCurrTxSpeed		1.3.6.1.4.1.15.2.16.1.3.1.6
The current transmit connect speed of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

activeCallAsyTxBaudRate		1.3.6.1.4.1.15.2.16.1.3.1.7
The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

activeCallAsyRxBaudRate		1.3.6.1.4.1.15.2.16.1.3.1.8
The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

activeCallAsyCurrSignalQ		1.3.6.1.4.1.15.2.16.1.3.1.10
Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

activeCallAsyBeginRxLineLevel		1.3.6.1.4.1.15.2.16.1.3.1.11
The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

activeCallAsyCurrRxLineLevel		1.3.6.1.4.1.15.2.16.1.3.1.12
The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

activeCallAsyErrorProtocol		1.3.6.1.4.1.15.2.16.1.3.1.14
Error correction protocol used by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7)

activeCallAsyCompressionProtocol		1.3.6.1.4.1.15.2.16.1.3.1.15
Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5)

activeCallAsyTxPackets		1.3.6.1.4.1.15.2.16.1.3.1.16
The number of LAPM packets sent by the modem. This does not include retransmitted packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyTxPacketError		1.3.6.1.4.1.15.2.16.1.3.1.17
The number of LAPM packets retransmitted by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRxPackets		1.3.6.1.4.1.15.2.16.1.3.1.19
The number of good LAPM packets received by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRxPacketError		1.3.6.1.4.1.15.2.16.1.3.1.20
The number of bad LAPM packets (with CRC errors) received by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRetrainReqSent		1.3.6.1.4.1.15.2.16.1.3.1.22
The number of retrains requested by the modem for this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRetrainReqReceived		1.3.6.1.4.1.15.2.16.1.3.1.23
The number of retrain requests received by the modem from the remote modem for this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRRNReqReceived		1.3.6.1.4.1.15.2.16.1.3.1.24
Number of rate renegotiation request (RRN) initiated by the remote modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRRNReqSent		1.3.6.1.4.1.15.2.16.1.3.1.25
Number of rate renegotiation request (RRN) initiated by this modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

activeCallAsyRoundTripDelay		1.3.6.1.4.1.15.2.16.1.3.1.26
The round trip delay, in milliseconds, for this call. This object alongwith the object, activeCallAsyFarEndEchoFreq, gives the echo characteristics of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyFarEndEchoFreq		1.3.6.1.4.1.15.2.16.1.3.1.27
Far end echo frequency offset, in Hertz. This object alongwith the object, activeCallAsyRoundTripDelay, gives the echo characteristics of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyFarEndEchoLevel		1.3.6.1.4.1.15.2.16.1.3.1.28
Far end echo level, in decibels. The number represents the negative decibels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyChanFreqOffset		1.3.6.1.4.1.15.2.16.1.3.1.29
Channel frequency offset, in Hertz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyOscFreqOffset		1.3.6.1.4.1.15.2.16.1.3.1.30
Oscillator frequency offset, in PPM. Not always valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsySNR		1.3.6.1.4.1.15.2.16.1.3.1.31
Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..80

activeCallAsyx2Status		1.3.6.1.4.1.15.2.16.1.3.1.32
x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyx2RbsStatus		1.3.6.1.4.1.15.2.16.1.3.1.33
x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyx2DigitalPadStatus		1.3.6.1.4.1.15.2.16.1.3.1.34
x2 attenuation
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

activeCallAsyk56Status		1.3.6.1.4.1.15.2.16.1.3.1.36
k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyk56RbsStatus		1.3.6.1.4.1.15.2.16.1.3.1.37
k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyk56DigitalPadStatus		1.3.6.1.4.1.15.2.16.1.3.1.38
k56 attenuation
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

activeCallAsyk56Version		1.3.6.1.4.1.15.2.16.1.3.1.40
k56 version number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyWANUnitNumber		1.3.6.1.4.1.15.2.16.1.3.1.41
The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyChannel		1.3.6.1.4.1.15.2.16.1.3.1.42
A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyCurrModulation		1.3.6.1.4.1.15.2.16.1.3.1.43
Beginning negotiated modulation mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7)

activeCallAsyCurrPumpState		1.3.6.1.4.1.15.2.16.1.3.1.44
End pump status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyx2SpeedReduction		1.3.6.1.4.1.15.2.16.1.3.1.45
Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyk56SpeedReduction		1.3.6.1.4.1.15.2.16.1.3.1.46
Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyV90Status		1.3.6.1.4.1.15.2.16.1.3.1.47
V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyV90ConstellationIndex0		1.3.6.1.4.1.15.2.16.1.3.1.48
Constellation index for symbol 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90ConstellationIndex1		1.3.6.1.4.1.15.2.16.1.3.1.49
Constellation index for symbol 1
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90ConstellationIndex2		1.3.6.1.4.1.15.2.16.1.3.1.50
Constellation index for symbol 2
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90ConstellationIndex3		1.3.6.1.4.1.15.2.16.1.3.1.51
Constellation index for symbol 3
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90ConstellationIndex4		1.3.6.1.4.1.15.2.16.1.3.1.52
Constellation index for symbol 4
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90ConstellationIndex5		1.3.6.1.4.1.15.2.16.1.3.1.53
Constellation index for symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

activeCallAsyV90PADStatus		1.3.6.1.4.1.15.2.16.1.3.1.54
Digital attenuation in dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyV90ShapingBits		1.3.6.1.4.1.15.2.16.1.3.1.55
Number of CSS redundancy bits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

activeCallAsyV90LookAhead		1.3.6.1.4.1.15.2.16.1.3.1.56
Number of look ahead CSS frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

activeCallAsyV90ConstellationPower		1.3.6.1.4.1.15.2.16.1.3.1.57
V90 constellation power in -dBm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

activeCallAsyV90HalfDuplexRRNRx		1.3.6.1.4.1.15.2.16.1.3.1.58
Number of received half-duplex RRNs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actCallTaTable		1.3.6.1.4.1.15.2.16.1.4
A table of TA call statistics indexed by the TA device number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActCallTaEntry

actCallTaEntry		1.3.6.1.4.1.15.2.16.1.4.1
A row in the TA call statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ActCallTaEntry

activeCallTaSpeed		1.3.6.1.4.1.15.2.16.1.4.1.1
The receive connect speed at the time the call was established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actCallSyncTable		1.3.6.1.4.1.15.2.16.1.5
A table of Sync call statistics indexed by the Sync device number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActCallSyncEntry

actCallSyncEntry		1.3.6.1.4.1.15.2.16.1.5.1
A row in the Sync call statistics table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ActCallSyncEntry

activeCallSyncSpeed		1.3.6.1.4.1.15.2.16.1.5.1.1
The receive connect speed at the time the call was established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

actCallMpTable		1.3.6.1.4.1.15.2.16.1.6
A table of call history MP information/statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ActCallMpEntry

actCallMpEntry		1.3.6.1.4.1.15.2.16.1.6.1
A row in the call history MP table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	ActCallMpEntry

activeCallMpBundleIdx		1.3.6.1.4.1.15.2.16.1.6.1.1
The identifier of this MP bundle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistMaxCalls		1.3.6.1.4.1.15.2.16.2.1
The maximum number of calls for which history is kept by the RAC. Default is 0. Note: Assigning an arbitrarily large value to this object could affect the performance of the box due to memory being used to maintain this table. Each call record uses about 500 bytes of RAC memory.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

callHistStartIdx		1.3.6.1.4.1.15.2.16.2.2
The beginning (lowest) value of callHistIndex currently in the call history table. This is the oldest call currently in the table. Note this value could change at any time since the table could have new calls added to it and old calls dropping off the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistEndIdx		1.3.6.1.4.1.15.2.16.2.3
The end (highest) value of callHistIndex in the call history table. Note this value could change at any time since the table will have new calls added whenever a call terminates.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistTable		1.3.6.1.4.1.15.2.16.2.4
A table of call history information. You should view this table as either a circular buffer or a sliding window whose size is specified by callHistMaxCalls. When the table is full and a call terminates, the information for the oldest call in the table is discarded and the new call information is added. The callHistStartIdx value is changed whenever a call's information is discarded. The callHistEndIdx value is changed whenever a call's information is added to the table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CallHistEntry

callHistEntry		1.3.6.1.4.1.15.2.16.2.4.1
A row in the call history table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CallHistEntry

callHistIndex		1.3.6.1.4.1.15.2.16.2.4.1.1
A unique identifier assigned to a call in the call history table. When a call terminates, its call record is moved from the active call table to the call history table, and the next higher history index number is assigned to it.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7fffffff

callHistUsername		1.3.6.1.4.1.15.2.16.2.4.1.2
Name of the user associated with this call. Can be a null string. This object obsoletes anxmStatsUsername.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

callHistCallingNumber		1.3.6.1.4.1.15.2.16.2.4.1.3
The number from which this call was made. Can be a null string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

callHistCalledNumber		1.3.6.1.4.1.15.2.16.2.4.1.4
The number to which this call was made. Can be a null string. This object obsoletes anxmStatsNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

callHistSPBName		1.3.6.1.4.1.15.2.16.2.4.1.5
Session Parameter Block name used when answering the call. Can be a null string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

callHistWANUnitNumber		1.3.6.1.4.1.15.2.16.2.4.1.6
The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistChannel		1.3.6.1.4.1.15.2.16.2.4.1.7
A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistDeviceType		1.3.6.1.4.1.15.2.16.2.4.1.8
An enumerated integer indicating the port type. asy(1) - the call was assigned internally to an asynchronous device (async port). syn(9) - the call was handled internally by a synchronous device (sync port). ta(10) - the call was handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	asy(1), syn(9), ta(10), mp(12)

callHistDeviceNumber		1.3.6.1.4.1.15.2.16.2.4.1.9
The 1-based device (port) number the call was assigned to. This object in conjunction with the object, callHistDeviceType, should be used to cross-reference the information displayed by the CLI command 'who'. This object obsoletes anxmStatsPort.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistSubAddress		1.3.6.1.4.1.15.2.16.2.4.1.10
The subaddress this call was connected to. Can be a null string.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..29)

callHistBearer		1.3.6.1.4.1.15.2.16.2.4.1.11
This object defines the bearer capability of the incoming call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	missing(1), voice(2), data(3)

callHistSetupTime		1.3.6.1.4.1.15.2.16.2.4.1.12
The time that the call started. This is RAC system time, which is the same as Unix system time: seconds since 0:00 January 1, 1970 UTC (GMT). This object obsoletes anxmStatsTime.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistDuration		1.3.6.1.4.1.15.2.16.2.4.1.13
Duration of the call, in seconds. This object obsoletes anxmStatsDuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistlocalin		1.3.6.1.4.1.15.2.16.2.4.1.14
The Internet (IP) address assigned to the RAC end of a point-to-point link established during this call, in dotted-decimal notation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

callHistremotein		1.3.6.1.4.1.15.2.16.2.4.1.15
The Internet (IP) address assigned to the far end of a point-to-point link established during this call, in dotted-decimal notation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..15)

callHistlocalat		1.3.6.1.4.1.15.2.16.2.4.1.16
The local AppleTalk address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

callHistremoteat		1.3.6.1.4.1.15.2.16.2.4.1.17
The remote AppleTalk address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..13)

callHistlocalipx		1.3.6.1.4.1.15.2.16.2.4.1.18
The local IPX address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

callHistremoteipx		1.3.6.1.4.1.15.2.16.2.4.1.19
The remote IPX address assigned to this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(21)

callHistConnectionType		1.3.6.1.4.1.15.2.16.2.4.1.20
The name of the client routine running on the port at the time of this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), cli(2), server(3), rdp(4), slip(5), dedicated(6), ldp(7), ppp(8), mp(9), arap(10), ftp(11), ndp(12), ipx(13), dynamic-dial(14), vpn(15), ppp-sublet-from-cli(16)

callHistOctetsRx		1.3.6.1.4.1.15.2.16.2.4.1.21
The number of octets received during this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistOctetsTx		1.3.6.1.4.1.15.2.16.2.4.1.22
The number of octets transmitted during this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistOrigin		1.3.6.1.4.1.15.2.16.2.4.1.23
The call origin. incoming(1) - the RAC answered an incoming call. outgoing(2) - the call was made by the RAC. This object deprecates callSetupCallType object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	incoming(1), outgoing(2)

callHistDisconnectReason		1.3.6.1.4.1.15.2.16.2.4.1.24
Call disconnect reasons: unknown telDisc got telephone disconnect (hangup) dialFailed wanmgrErr internal error, shouldn't happen reset WAN/channel reset admErrornext general internal mechanism to end call admModDown DSR or DCD went down pppTerm PPP protocol disconnect inactivity inactivity timer ran out hangupCmd CLI command 'hangup' lastJob CLI last-job maxLogon max logon timer ran out slaveNormal normal slave termination slaveError abnormal slave termination noCarrier modem failed to establish a connection cliInactivity cli_inactivity timer ran out portReset port was reset cliAuthFail CLI authorization failed slaveAuthFail slave port authorization failed pppPapFail PPP PAP failed pppChapFail PPP CHAP failed modemReset internal modem was reset deadModemReset internal modem was reset because it was not responding
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), telDisc(2), dialFailed(3), wanmgrErr(4), reset(5), admErrornext(6), admModDown(7), pppTerm(8), inactivity(9), hangupCmd(10), lastJob(11), maxLogon(12), slaveNormal(13), slaveError(14), noCarrier(15), cliInactivity(16), portReset(17), cliAuthFail(18), slaveAuthFail(19), pppPapFail(20), pppChapFail(21), modemReset(22), deadModemReset(23), pppLcpFail(24), pppLastNcpFailIpcp(25), pppLastNcpFailIpxcp(26), pppLastNcpFailAtcp(27), pppLastNcpFailCcp(28), pppLastNcpFailMp(29), pppLastNcpToIpcp(30), pppLastNcpToIpxcp(31), pppLastNcpToAtcp(32), pppLastNcpToCcp(33), pppLastNcpToMp(34), pppInitFailed(35), pppUnknownCode(36), pppDialback(37), pppAddrInuse(38), pppNoDevice(39), pppModSigHangup(40), pppSigHangup(41), pppSigTerm(42), pppSigKill(43), pppSigTime(44), pppNoMem(45), pppConnAbort(46), pppVpnLcpFail(47), pppVpnAuthFail(48), pppMpBadPortCfg(49), pppInvOpDevType(50), mmpBunDiscFail(51), dvsRegFail(52), dvsHaDereg(53), dvsTnlNoRenew(54), dvsTnlExpire(55), l2tpCallFail(56), l2tpCallDiscNotify(57), dialTimedout(58), camponError(59), preempted(60), pppBunLinkErr(61), clidialbackrequest(62)

callHistConfiguredType		1.3.6.1.4.1.15.2.16.2.4.1.25
The type (mode) of the port at the time of the connection. cli - allows an incoming session access to the CLI. The CLI provides access to the network and connections to other hosts via the telnet, connect, rlogin and tn3270 commands. slip - allows a port to perform as a network interface using SLIP. IP packets are encapsulated by SLIP. ppp - allows a port to perform as a network interface using PPP. Packets of several protocols are encapsulated by PPP. arap - allows a port to perform as a network interface using ARAP. slave - allows a port to accept TCP connections over the network. connect - allows a port to communicate with a LAT host via the connect command. rlogin - allows a port to communicate via the rlogin command. telnet - allows a port to communicate via the telnet command. tn3270 - allows a port to communicate via the tn3270 command.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cli(1), slave(2), adaptive(3), unused(4), slip(5), dedicated(6), ppp(7), arap(8), printer(9), auto-detect(10), auto-adapt(11), ndp(12), ipx(13), call(14), connect(15), rlogin(16), telnet(17), tn3270(18), any(19)

callHistCompositeDisconnect		1.3.6.1.4.1.15.2.16.2.4.1.26
Composite call disconnect reason. Either system or modem disconnect reason (callHistDisconnectReason or callHistAsyMdmDisconnectReason). Modem reasons have 100,000 added to avoid collisions (since SNMP does not allow enum values to be negative). The modem version of 'unknown' does not occur here.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), telDisc(2), dialFailed(3), wanmgrErr(4), reset(5), admErrornext(6), admModDown(7), pppTerm(8), inactivity(9), hangupCmd(10), lastJob(11), maxLogon(12), slaveNormal(13), slaveError(14), noCarrier(15), cliInactivity(16), portReset(17), cliAuthFail(18), slaveAuthFail(19), pppPapFail(20), pppChapFail(21), modemReset(22), deadModemReset(23), pppLcpFail(24), pppLastNcpFailIpcp(25), pppLastNcpFailIpxcp(26), pppLastNcpFailAtcp(27), pppLastNcpFailCcp(28), pppLastNcpFailMp(29), pppLastNcpToIpcp(30), pppLastNcpToIpxcp(31), pppLastNcpToAtcp(32), pppLastNcpToCcp(33), pppLastNcpToMp(34), pppInitFailed(35), pppUnknownCode(36), pppDialback(37), pppAddrInuse(38), pppNoDevice(39), pppModSigHangup(40), pppSigHangup(41), pppSigTerm(42), pppSigKill(43), pppSigTime(44), pppNoMem(45), pppConnAbort(46), pppVpnLcpFail(47), pppVpnAuthFail(48), pppMpBadPortCfg(49), pppInvOpDevType(50), mmpBunDiscFail(51), dvsRegFail(52), dvsHaDereg(53), dvsTnlNoRenew(54), dvsTnlExpire(55), l2tpCallFail(56), l2tpCallDiscNotify(57), clidialbackrequest(58), mdm-local-host-disconnect(100002), mdm-cd-timer-expired(100003), mdm-protocol-disconnect(100004), mdm-proto-discon-remote-mdm(100005), mdm-cleardown(100006), mdm-long-space-disconnect(100007), mdm-carrier-lost(100008), mdm-retrain-timeout(100009)

callHistOwningBundle		1.3.6.1.4.1.15.2.16.2.4.1.27
The identifier of the MP bundle that owns this PPP link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyTable		1.3.6.1.4.1.15.2.16.2.5
A table of call history asynchronous information/statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CallHistAsyEntry

callHistAsyEntry		1.3.6.1.4.1.15.2.16.2.5.1
A row in the call history async. table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CallHistAsyEntry

callHistAsyBeginRxSpeed		1.3.6.1.4.1.15.2.16.2.5.1.1
The receive connect speed when the modem connection was established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

callHistAsyEndRxSpeed		1.3.6.1.4.1.15.2.16.2.5.1.2
The ending receive connect speed of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

callHistAsyBeginTxSpeed		1.3.6.1.4.1.15.2.16.2.5.1.3
The transmit connect speed when the modem connection was established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

callHistAsyEndTxSpeed		1.3.6.1.4.1.15.2.16.2.5.1.4
The ending transmit connect speed of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

callHistAsyTxBaudRate		1.3.6.1.4.1.15.2.16.2.5.1.5
The transmit rate at which symbols that carry data are generated. Symbol rate limits and options apply to V.34. Default is r2400(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

callHistAsyRxBaudRate		1.3.6.1.4.1.15.2.16.2.5.1.6
The received rate at which symbols that carry data are received. Symbol rate limits and options apply to V.34. Default is r2400(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

callHistAsyBeginSignalQ		1.3.6.1.4.1.15.2.16.2.5.1.7
Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

callHistAsyEndSignalQ		1.3.6.1.4.1.15.2.16.2.5.1.8
Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

callHistAsyBeginRxLineLevel		1.3.6.1.4.1.15.2.16.2.5.1.9
The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

callHistAsyEndRxLineLevel		1.3.6.1.4.1.15.2.16.2.5.1.10
The receive signal level at the end of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

callHistAsyModulationMode		1.3.6.1.4.1.15.2.16.2.5.1.11
Negotiated modulation mode.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7)

callHistAsyErrorProtocol		1.3.6.1.4.1.15.2.16.2.5.1.12
Error correction protocol used by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7)

callHistAsyCompressionProtocol		1.3.6.1.4.1.15.2.16.2.5.1.13
Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5)

callHistAsyTxPackets		1.3.6.1.4.1.15.2.16.2.5.1.14
The number of LAPM packets sent by the modem. This does not include retransmitted packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyTxPacketError		1.3.6.1.4.1.15.2.16.2.5.1.15
The number of LAPM packets retransmitted by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRxPackets		1.3.6.1.4.1.15.2.16.2.5.1.17
The number of good LAPM packets received by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRxPacketError		1.3.6.1.4.1.15.2.16.2.5.1.18
The number of bad LAPM packets (with CRC errors) received by the modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRetrainReqSent		1.3.6.1.4.1.15.2.16.2.5.1.20
The number of retrains requested by the modem for this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRetrainReqReceived		1.3.6.1.4.1.15.2.16.2.5.1.21
The number of retrain requests received by the modem from the remote modem for this call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRRNReqReceived		1.3.6.1.4.1.15.2.16.2.5.1.22
Number of rate renegotiation request (RRN) initiated by the remote modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRRNReqSent		1.3.6.1.4.1.15.2.16.2.5.1.23
Number of rate renegotiation request (RRN) initiated by this modem.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

callHistAsyRoundTripDelay		1.3.6.1.4.1.15.2.16.2.5.1.24
The round trip delay, in milliseconds, for this call. This object, along with the object callHistAsyFarEndEchoFreq, gives the echo characteristics of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyFarEndEchoFreq		1.3.6.1.4.1.15.2.16.2.5.1.25
Far end echo frequency offset, in Hertz. This object, along with the object callHistAsyRoundTripDelay, gives the echo characteristics of the call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyFarEndEchoLevel		1.3.6.1.4.1.15.2.16.2.5.1.26
Far end echo level, in decibels. The number represents the negative decibels.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyChanFreqOffset		1.3.6.1.4.1.15.2.16.2.5.1.27
Channel frequency offset, in Hertz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyOscFreqOffset		1.3.6.1.4.1.15.2.16.2.5.1.28
Oscillator frequency offset, in PPM. Not always valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsySNR		1.3.6.1.4.1.15.2.16.2.5.1.29
Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..80

callHistAsyMdmDisconnectReason		1.3.6.1.4.1.15.2.16.2.5.1.30
Modem's reason for disconnecting the call. Modem's disconnect reason could be different from the system's reason for disconnecting the call. carrier-lost(8) - modem detected the loss of carrier. The time (delay) from loss of carrier until the modem disconnects is determined by MIB object mdmCfgLineCarrierDisconnect. retrain-timeout(9) - modem failed to retrain.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), local-host-disconnect(2), cd-timer-expired(3), protocol-disconnect(4), proto-discon-remote-mdm(5), cleardown(6), long-space-disconnect(7), carrier-lost(8), retrain-timeout(9)

callHistAsyx2Status		1.3.6.1.4.1.15.2.16.2.5.1.31
x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyx2RbsStatus		1.3.6.1.4.1.15.2.16.2.5.1.32
x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyx2DigitalPadStatus		1.3.6.1.4.1.15.2.16.2.5.1.33
x2 attenuation
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

callHistAsyx2Shaping		1.3.6.1.4.1.15.2.16.2.5.1.34
Number of bits used for spectral shaping in one data frame (frame 0 - 6)
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyk56Status		1.3.6.1.4.1.15.2.16.2.5.1.35
k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyk56RbsStatus		1.3.6.1.4.1.15.2.16.2.5.1.36
k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyk56DigitalPadStatus		1.3.6.1.4.1.15.2.16.2.5.1.37
k56 attenuation
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

callHistAsyk56Shaping		1.3.6.1.4.1.15.2.16.2.5.1.38
Number of bits used for spectral shaping in one data frame (frame 0 - 6)
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyk56Version		1.3.6.1.4.1.15.2.16.2.5.1.39
k56 version number
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsySignalQ		1.3.6.1.4.1.15.2.16.2.5.1.40
Line signal quality at the end of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyBeginModulation		1.3.6.1.4.1.15.2.16.2.5.1.41
Beginning negotiated modulation mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7)

callHistAsyEndModulation		1.3.6.1.4.1.15.2.16.2.5.1.42
Ending negotiated modulation mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7)

callHistAsyEndPumpState		1.3.6.1.4.1.15.2.16.2.5.1.43
End pump status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyx2SpeedReduction		1.3.6.1.4.1.15.2.16.2.5.1.44
Speed reduction due to spectral shaping: 0 no speed reduction 1 speed reduction of 1.333 kBps 2 speed reduction of 2.666 kBps 3 speed reduction of 4.0 kBps 4 speed reduction of 5.333 kBps 5 speed reduction of 6.666 kBps 6 speed reduction of 8.0 kBps
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyk56SpeedReduction		1.3.6.1.4.1.15.2.16.2.5.1.45
Speed reduction due to robbed bits: 0 no speed reduction 1 speed reduction of 2.0 kBps 2 speed reduction of 4.0 kBps 3 speed reduction of 6.0 kBps 4 speed reduction of 8.0 kBps
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyV90Status		1.3.6.1.4.1.15.2.16.2.5.1.46
V90 status (this is a bitmap): 1 = currently in V90 mode 2 = V90 detected in phase 1 4 = V90 detected in phase 2 8 = V90 through phase 3 16 = V90 through phase 4 32 = V90 in data mode 64 = V90 data mode at least once
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyV90ConstellationIndex0		1.3.6.1.4.1.15.2.16.2.5.1.47
Constellation index for symbol 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90ConstellationIndex1		1.3.6.1.4.1.15.2.16.2.5.1.48
Constellation index for symbol 1
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90ConstellationIndex2		1.3.6.1.4.1.15.2.16.2.5.1.49
Constellation index for symbol 2
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90ConstellationIndex3		1.3.6.1.4.1.15.2.16.2.5.1.50
Constellation index for symbol 3
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90ConstellationIndex4		1.3.6.1.4.1.15.2.16.2.5.1.51
Constellation index for symbol 4
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90ConstellationIndex5		1.3.6.1.4.1.15.2.16.2.5.1.52
Constellation index for symbol 5
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

callHistAsyV90PADStatus		1.3.6.1.4.1.15.2.16.2.5.1.53
Digital attenuation in dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyV90ShapingBits		1.3.6.1.4.1.15.2.16.2.5.1.54
Number of CSS redundancy bits.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

callHistAsyV90LookAhead		1.3.6.1.4.1.15.2.16.2.5.1.55
Number of look ahead CSS frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

callHistAsyV90ConstellationPower		1.3.6.1.4.1.15.2.16.2.5.1.56
V90 constellation power in -dBm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistAsyV90HalfDuplexRRNRx		1.3.6.1.4.1.15.2.16.2.5.1.57
Number of received half-duplex RRNs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistTaTable		1.3.6.1.4.1.15.2.16.2.6
A table of call history TA information/statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CallHistTaEntry

callHistTaEntry		1.3.6.1.4.1.15.2.16.2.6.1
A row in the call history TA table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CallHistTaEntry

callHistTaSpeed		1.3.6.1.4.1.15.2.16.2.6.1.1
The identifier of this TA bundle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistSyncTable		1.3.6.1.4.1.15.2.16.2.7
A table of call history Sync information/statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CallHistSyncEntry

callHistSyncEntry		1.3.6.1.4.1.15.2.16.2.7.1
A row in the call history Sync table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CallHistSyncEntry

callHistSyncSpeed		1.3.6.1.4.1.15.2.16.2.7.1.1
The identifier of this Sync bundle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

callHistMpTable		1.3.6.1.4.1.15.2.16.2.8
A table of call history MP information/statistics.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CallHistMpEntry

callHistMpEntry		1.3.6.1.4.1.15.2.16.2.8.1
A row in the call history MP table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CallHistMpEntry

callHistMpBundleIdx		1.3.6.1.4.1.15.2.16.2.8.1.1
The identifier of this MP bundle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatTable		1.3.6.1.4.1.15.2.16.3.1
A table of modem call statistics.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MdmCallStatEntry

mdmCallStatEntry		1.3.6.1.4.1.15.2.16.3.1.1
A row in the modem call statistics table.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	MdmCallStatEntry

mdmCallStatBeginRxSpeed		1.3.6.1.4.1.15.2.16.3.1.1.3
The receive connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

mdmCallStatCurrRxSpeed		1.3.6.1.4.1.15.2.16.3.1.1.4
The current receive connect speed of the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

mdmCallStatBeginTxSpeed		1.3.6.1.4.1.15.2.16.3.1.1.5
The transmit connect speed at the time the call was established. Note: The agent will return zero if the modem is not in a busy state.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

mdmCallStatCurrTxSpeed		1.3.6.1.4.1.15.2.16.3.1.1.6
The current transmit connect speed of the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	bps300(1), bps600(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), idle(20), handshaking(21), bps25333(22), bps26666(23), bps28000(24), bps29333(25), bps30666(26), bps32000(27), bps33333(28), bps34000(29), bps34666(30), bps36000(31), bps37333(32), bps38000(33), bps38666(34), bps40000(35), bps41333(36), bps42000(37), bps42666(38), bps44000(39), bps45333(40), bps46000(41), bps46666(42), bps48000(43), bps49333(44), bps50000(45), bps50666(46), bps52000(47), bps53333(48), bps54000(49), bps54666(50), bps56000(51), bps57333(52), bps58000(53), bps60000(54)

mdmCallStatTxBaudRate		1.3.6.1.4.1.15.2.16.3.1.1.7
The rate at which symbols that carry data are generated. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

mdmCallStatRxBaudRate		1.3.6.1.4.1.15.2.16.3.1.1.8
The rate at which symbols that carry data are received. Symbol rate limits and options apply to the modem v.34. Default is r2400(1).
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	r2400(1), r2743(2), r2800(3), r3000(4), r3200(5), r3429(6), r8000(7)

mdmCallStatBeginSignalQ		1.3.6.1.4.1.15.2.16.3.1.1.9
Line signal quality at the beginning of the call. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

mdmCallStatCurrSignalQ		1.3.6.1.4.1.15.2.16.3.1.1.10
Current line signal quality. This is a unitless number derived from several line characteristics. Range is 0-255; 0 is good. 30 or less is reasonable.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

mdmCallStatBeginRxLineLevel		1.3.6.1.4.1.15.2.16.3.1.1.11
The receive signal level at the beginning of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

mdmCallStatCurrRxLineLevel		1.3.6.1.4.1.15.2.16.3.1.1.12
The current receive signal level of the call, in dBm (ratio of receive level to a reference value). The number returned by this MIB object is positive, but it represents a negative number (ie, this object returns the negative of the actual dBm). Expected values are roughly -12 to -30. Less than -11 is bad; that signal is too strong, and causes problems for the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..45

mdmCallStatModulationMode		1.3.6.1.4.1.15.2.16.3.1.1.13
Negotiated modulation mode.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v34(2), v32-v32bis(3), v22bis(4), x2(5), k56(6), itu-tPCM(7)

mdmCallStatErrorProtocol		1.3.6.1.4.1.15.2.16.3.1.1.14
Error correction protocol used by the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), buffer(2), mnpclass2(3), mnpclass3(4), mnpclass4(5), v42(6), v42selrej(7)

mdmCallStatCompressionProtocol		1.3.6.1.4.1.15.2.16.3.1.1.15
Data compression protocol used by the modem. The compression protocol used by the modem is dependent on the error correction protocol used at the lower layer.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), v42bis-decode(2), v42bis-encode(3), v42bis-encode-decode(4), mnpclass5(5)

mdmCallStatTxPackets		1.3.6.1.4.1.15.2.16.3.1.1.16
The number of LAPM packets sent by the modem. This does not include retransmitted packets.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatTxPacketError		1.3.6.1.4.1.15.2.16.3.1.1.17
The number of LAPM packets retransmitted by the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRxPackets		1.3.6.1.4.1.15.2.16.3.1.1.19
The number of good LAPM packets received by the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRxPacketError		1.3.6.1.4.1.15.2.16.3.1.1.20
The number of bad LAPM packets (with CRC errors) received by the modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRetrainReqSent		1.3.6.1.4.1.15.2.16.3.1.1.22
The number of retrains requested by the modem for this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRetrainReqReceived		1.3.6.1.4.1.15.2.16.3.1.1.23
The number of retrain requests received by the modem from the remote modem for this call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRRNReqReceived		1.3.6.1.4.1.15.2.16.3.1.1.24
Number of rate renegotiation request (RRN) initiated by the remote modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRRNReqSent		1.3.6.1.4.1.15.2.16.3.1.1.25
Number of rate renegotiation request (RRN) initiated by this modem.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter

mdmCallStatRoundTripDelay		1.3.6.1.4.1.15.2.16.3.1.1.26
The round trip delay, in milliseconds, for this call. This object alongwith the object, mdmCallStatFarEndEchoFreq, gives the echo characteristics of the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatFarEndEchoFreq		1.3.6.1.4.1.15.2.16.3.1.1.27
Far end echo frequency offset, in Hertz. This object alongwith the object, mdmCallStatRoundTripDelay, gives the echo characteristics of the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatFarEndEchoLevel		1.3.6.1.4.1.15.2.16.3.1.1.28
Far end echo level, in decibels. The number represents the negative decibels.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatChanFreqOffset		1.3.6.1.4.1.15.2.16.3.1.1.29
Channel frequency offset, in Hertz.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatOscFreqOffset		1.3.6.1.4.1.15.2.16.3.1.1.30
Oscillator frequency offset, in PPM. Not always valid.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatSNR		1.3.6.1.4.1.15.2.16.3.1.1.31
Signal to noise ratio in decibels. Low is bad, high is good. Zero means not valid: no current connection, or connection is not V.34 (other protocols don't calculate this).
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	0..80

mdmCallStatx2Status		1.3.6.1.4.1.15.2.16.3.1.1.32
x2 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 X2 In Phase 3 P4 = 1 X2 In Phase 4 DM = 1 X2 In Data Mode
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatx2RbsStatus		1.3.6.1.4.1.15.2.16.3.1.1.33
x2 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatx2DigitalPadStatus		1.3.6.1.4.1.15.2.16.3.1.1.34
x2 attenuation
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

mdmCallStatx2Shaping		1.3.6.1.4.1.15.2.16.3.1.1.35
x2 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatk56Status		1.3.6.1.4.1.15.2.16.3.1.1.36
k56 phase bit map --------------------- | 4 | 3 | 2 | 1 | 0 | bits --------------------- |DM |P4 |P3 |P2 |P1 | --------------------- P1 = 1 Detected In Phase 1 P2 = 1 Detected In Phase 2 P3 = 1 K56 In Phase 3 P4 = 1 K56 In Phase 4 DM = 1 K56 In Data Mode
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatk56RbsStatus		1.3.6.1.4.1.15.2.16.3.1.1.37
k56 raw bit signalling, bit map ------------------------- | 5 | 4 | 3 | 2 | 1 | 0 | bits ------------------------- |S5 |S4 |S3 |S2 |S1 |S0 | ------------------------- S0 = 1 RBS in symbol 0 S1 = 1 RBS in symbol 1 S2 = 1 RBS in symbol 2 S3 = 1 RBS in symbol 3 S4 = 1 RBS in symbol 4 S5 = 1 RBS in symbol 5
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatk56DigitalPadStatus		1.3.6.1.4.1.15.2.16.3.1.1.38
k56 attenuation
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), a3db(2), a6db(3)

mdmCallStatk56Shaping		1.3.6.1.4.1.15.2.16.3.1.1.39
k56 - Number of bits used for spectral shaping in one data frame (frame 0 - 6)
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatk56Version		1.3.6.1.4.1.15.2.16.3.1.1.40
k56 version number
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatWANUnitNumber		1.3.6.1.4.1.15.2.16.3.1.1.41
The physical WAN module unit number in the RAC that uses WAN modules. The range is 1 to anxt1Total. Use anxt1WanModuleTable to retrieve the unit's ifIndex number.(For R14.1 and later releases, WAN1=1001 and WAN2 = 1002 always
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

mdmCallStatChannel		1.3.6.1.4.1.15.2.16.3.1.1.42
A number from 1 to anxt1TotChan that identifies which DS0 channel handled the call.
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER

portActionTable		1.3.6.1.4.1.15.2.16.4.1
A table of port actions
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PortActionEntry

portActionEntry		1.3.6.1.4.1.15.2.16.4.1.1
A row in the portActionTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PortActionEntry

portActionDeviceType		1.3.6.1.4.1.15.2.16.4.1.1.1
An enumerated integer indicating the device type. asy(1) - the call is assigned internally to an asynchronous device (async port). syn(9) - the call is handled internally by a synchronous device (sync port). ta(10) - the call is handled internally by a ta device (ta port). mp(12) - pseudo-session, Multi-link PPP bundle head. vpn(13) - Virtual Private Network. gen-sync(14) - General Sync port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	asy(1), syn(9), ta(10), mp(12), vpn(13), gen-sync-port(14)

portActionDeviceNumber		1.3.6.1.4.1.15.2.16.4.1.1.2
The one-based device (port) number the call is assigned to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

portActionResetPort		1.3.6.1.4.1.15.2.16.4.1.1.3
Setting this object to execute will reset the specified port terminating all sessions on the port. Reading this object will allways return ready(1). Setting this object is equivalent to the reset port command in cli/admin.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), execute(2)