XYLAN-VLAN-MIB

File: XYLAN-VLAN-MIB.mib (161711 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
BRIDGE-MIB XYLAN-PORT-MIB XYLAN-BASE-MIB

Imported symbols

Counter TimeTicks IpAddress
OBJECT-TYPE DisplayString MacAddress
BridgeId Timeout XylanPortFuncCodes
xylanVlanArch

Defined Types

XylanVlanAdminStatCodes  
INTEGER disable(1), enable(2), delete(3), create(4), modify(5)    

XylanVlanOperStatCodes  
INTEGER inactive(1), active(2)    

XylanVlanModes  
INTEGER invalid(1), other(2), standard(3), atmCIP(4), frRouter(5)    

NetNumber  
OCTET STRING Size(4)    

VLanEntry  
SEQUENCE    
  vLanNumber INTEGER
  vLanBridgeAddress MacAddress
  vLanBridgeType INTEGER
  vLanDescription DisplayString
  vLanAdmStatus XylanVlanAdminStatCodes
  vLanOperStatus XylanVlanOperStatCodes
  vLanMode XylanVlanModes
  vLanFloodOverride INTEGER
  vLanRouterAddress MacAddress
  vLanMobileGroup INTEGER
  vLanAuthGroup INTEGER
  vLanAuthGroupProtocol OCTET STRING
  vLanStpStatus INTEGER
  vLanBrdgTpExtendedAgeingTime INTEGER
  vLanPriority INTEGER

VIPRouterEntry  
SEQUENCE    
  vIPRouterVLan INTEGER
  vIPRouterProtocol OCTET STRING
  vIPRouterNetAddress IpAddress
  vIPRouterSubNetMask IpAddress
  vIPRouterBcastAddress IpAddress
  vIPRouterDescription DisplayString
  vIPRouterAdmStatus XylanVlanAdminStatCodes
  vIPRouterOperStatus XylanVlanOperStatCodes
  vIPRouterFramingType INTEGER
  vIPRouterRipConfigMode INTEGER

VIPRouterRelayServType  
INTEGER vIPRouterRelayBootp(1), vIPRouterRelayNBNS(2), vIPRouterRelayNBDD(3), vIPRouterRelayGen1(4), vIPRouterRelayGen2(5), vIPRouterRelayGen3(6), vIPRouterRelayGen4(7), vIPRouterRelayGen5(8)    

VIPRouterRelayEntry  
SEQUENCE    
  vIPRouterRelayService VIPRouterRelayServType
  vIPRouterRelayMode INTEGER
  vIPRouterRelayNextHop IpAddress
  vIPRouterRelayParam1 INTEGER
  vIPRouterRelayParam2 INTEGER
  vIPRouterRelayDescription DisplayString

VIPXRouterEntry  
SEQUENCE    
  vIPXRouterVLan INTEGER
  vIPXRouterProtocol INTEGER
  vIPXRouterNetAddress OCTET STRING
  vIPXRouterFramingType INTEGER
  vIPXRouterDescription DisplayString
  vIPXRouterAdmStatus XylanVlanAdminStatCodes
  vIPXRouterOperStatus XylanVlanOperStatCodes
  vIPXSrcRteType INTEGER

VBrdgTpFdbEntry  
SEQUENCE    
  vBrdgTpFdbGroupId INTEGER
  vBrdgTpFdbAddress MacAddress
  vBrdgTpFdbRcvPortSlot INTEGER
  vBrdgTpFdbRcvPortIF INTEGER
  vBrdgTpFdbRcvPortFuncTyp XylanPortFuncCodes
  vBrdgTpFdbRcvPortFuncTypInst INTEGER
  vBrdgTpFdbRcvStatus INTEGER
  vBrdgTpFdbRcvVLANMembership INTEGER
  vBrdgTpFdbDupStatus INTEGER
  vBrdgTpFdbLastSeenTime Counter

VBrdgStaticEntry  
SEQUENCE    
  vBrdgStaticAddress MacAddress
  vBrdgStaticPortSlot INTEGER
  vBrdgStaticPortIF INTEGER
  vBrdgStaticPortFuncTyp XylanPortFuncCodes
  vBrdgStaticPortFuncTypInst INTEGER
  vBrdgStaticStatus INTEGER

VStpPortEntry  
SEQUENCE    
  vStpPortSlot INTEGER
  vStpPortIF INTEGER
  vStpPortFuncTyp INTEGER
  vStpPortFuncTypInst INTEGER
  vStpPortPriority INTEGER
  vStpPortState INTEGER
  vStpPortEnable INTEGER
  vStpPortPathCost INTEGER
  vStpPortDesignatedRoot BridgeId
  vStpPortDesignatedCost INTEGER
  vStpPortDesignatedBridge BridgeId
  vStpPortDesignatedPtPrio INTEGER
  vStpPortDesignatedPtSlot INTEGER
  vStpPortDesignatedPtIF INTEGER
  vStpPortDesignatedPtFuncTyp XylanPortFuncCodes
  vStpPortDesignatedPtFuncTypInst INTEGER
  vStpPortForwardTransitions INTEGER

VRipInfoEntry  
SEQUENCE    
  vRipInfovLanNumber INTEGER
  vRipInPkts Counter
  vRipOutPkts Counter
  vRipBadSize Counter
  vRipBadVersion Counter
  vRipNonZero Counter
  vRipBadFamily Counter
  vRipBadMetric Counter
  vRipBadAddr Counter
  vRipBadCommand Counter
  vRipTransmitsFailed Counter

VSrPortEntry  
SEQUENCE    
  vSrSlot INTEGER
  vSrInterface INTEGER
  vSrFuncType INTEGER
  vSrInstance INTEGER
  vSrHopCount INTEGER
  vSrLocalSegment INTEGER
  vSrBridgeNum INTEGER
  vSrVirtualRing INTEGER
  vSrLargestFrame INTEGER
  vSrSTESpanMode INTEGER
  vSrSpecInFrames Counter
  vSrSpecOutFrames Counter
  vSrApeInFrames Counter
  vSrApeOutFrames Counter
  vSrSteInFrames Counter
  vSrSteOutFrames Counter
  vSrInvalidRif Counter
  vSrDuplicateSegmentDiscards Counter
  vSrHopCountExceededDiscards Counter
  vSrDupLanIdOrTreeErrors Counter
  vSrLanIdMismatches Counter
  vSrBridgeLfMode INTEGER
  vSrPortType INTEGER
  vSrAREblock INTEGER
  vSrHopCountIn INTEGER
  vSrSapDenyFilter1 INTEGER
  vSrSapDenyFilter2 INTEGER
  vSrSapPermitFilter1 INTEGER
  vSrSapPermitFilter2 INTEGER

VTrunkingServicesEntry  
SEQUENCE    
  vTrunkingServicesSlot INTEGER
  vTrunkingServicesStation INTEGER
  vTrunkingServicesDescription DisplayString
  vTrunkingServicesBridgeID INTEGER

VTrunkingVlanEntry  
SEQUENCE    
  vTrunkingSlot INTEGER
  vTrunkingStation INTEGER
  vTrunkingLanNumber INTEGER
  vTrunkingCommand INTEGER

AtportRuleEntry  
SEQUENCE    
  atportRuleGroupId INTEGER
  atportRuleVLANId INTEGER
  atportRuleIdx INTEGER
  atportRulePortId OCTET STRING
  atportRulePortState INTEGER

AtMacRuleEntry  
SEQUENCE    
  atMacRuleGroupId INTEGER
  atMacRuleVLANId INTEGER
  atMacRuleIndex INTEGER
  atMacRuleMacAddress MacAddress
  atMacRuleMacAddressState INTEGER

AtProtoRuleEntry  
SEQUENCE    
  atProtoRuleGroupId INTEGER
  atProtoRuleVLANId INTEGER
  atProtoRuleIndex INTEGER
  atProtoRule OCTET STRING
  atProtoRuleStatus INTEGER

AtNetRuleEntry  
SEQUENCE    
  atNetRuleGroupId INTEGER
  atNetRuleVLANId INTEGER
  atNetRuleIndex INTEGER
  atNetRuleProtocolId INTEGER
  atNetRuleNetAddr OCTET STRING
  atNetRuleStatus INTEGER

AtUserRuleEntry  
SEQUENCE    
  atUserRuleGroupId INTEGER
  atUserRuleVLANId INTEGER
  atUserRuleIndex INTEGER
  atUserRuleOffset INTEGER
  atUserRuleValue OCTET STRING
  atUserRuleMask OCTET STRING
  atUserRuleStatus INTEGER

AtVLANRuleSumEntry  
SEQUENCE    
  atVLANRuleSumGroupId INTEGER
  atVLANRuleSumVLANId INTEGER
  atVLANRuleIndex INTEGER
  atVLANRuleSubIndex INTEGER
  atVLANRuleType INTEGER

AtVLANControlEntry  
SEQUENCE    
  atVLANGroupId INTEGER
  atVLANId INTEGER
  atVLANDesc DisplayString
  atVLANAdminStatus INTEGER
  atVLANOperStatus INTEGER

AtmcportRuleEntry  
SEQUENCE    
  atmcportRuleGroupId INTEGER
  atmcportRuleVLANId INTEGER
  atmcportRuleIdx INTEGER
  atmcportRulePortId OCTET STRING
  atmcportRulePortState INTEGER

AtmcMacRuleEntry  
SEQUENCE    
  atmcMacRuleGroupId INTEGER
  atmcMacRuleVLANId INTEGER
  atmcMacRuleIndex INTEGER
  atmcMacRuleMacAddress MacAddress
  atmcMacRuleMacAddressState INTEGER

AtMcastRuleEntry  
SEQUENCE    
  atMcastRuleGroupId INTEGER
  atMcastRuleVLANId INTEGER
  atMcastRuleIndex INTEGER
  atMcastRuleMacAddress MacAddress
  atMcastRuleMacAddressState INTEGER

AtmcVLANRuleSumEntry  
SEQUENCE    
  atmcVLANRuleSumGroupId INTEGER
  atmcVLANRuleSumVLANId INTEGER
  atmcVLANRuleIndex INTEGER
  atmcVLANRuleSubIndex INTEGER
  atmcVLANRuleType INTEGER

AtmcVLANControlEntry  
SEQUENCE    
  atmcVLANGroupId INTEGER
  atmcVLANId INTEGER
  atmcVLANDesc DisplayString
  atmcVLANAdminStatus INTEGER
  atmcVLANOperStatus INTEGER

GmAutoServiceEntry  
SEQUENCE    
  gmAutoServiceGroupId INTEGER
  gmAutoServicePrimarySlot INTEGER
  gmAutoServicePrimaryPort INTEGER
  gmAutoServiceIndex INTEGER
  gmAutoServiceType INTEGER
  gmAutoServiceName DisplayString
  gmAutoServiceSecondarySlot INTEGER
  gmAutoServiceSecondaryPort INTEGER
  gmAutoServiceAdminState INTEGER
  gmAutoServiceOperState INTEGER
  gmAutoServiceActiveSlot INTEGER
  gmAutoServiceActivePort INTEGER
  gmAutoServiceNumber INTEGER
  gmAutoServiceTranslations INTEGER

AtBindRuleEntry  
SEQUENCE    
  atBindRuleGroupId INTEGER
  atBindRuleVlanId INTEGER
  atBindRuleIndex INTEGER
  atBindRulePortId OCTET STRING
  atBindRuleIPAddress IpAddress
  atBindRuleMacAddress MacAddress
  atBindRuleProtocol OCTET STRING
  atBindRuleBindParameter INTEGER
  atBindRuleStatus INTEGER

GmGroupListEntry  
SEQUENCE    
  gmGroupListPortSlot INTEGER
  gmGroupListPortInterface INTEGER
  gmGroupListGroupId INTEGER

AtDHCPportRuleEntry  
SEQUENCE    
  atDHCPportRuleGroupId INTEGER
  atDHCPportRuleVLANId INTEGER
  atDHCPportRuleIdx INTEGER
  atDHCPportRulePortId OCTET STRING
  atDHCPportRulePortState INTEGER

AtDHCPMacRuleEntry  
SEQUENCE    
  atDHCPMacRuleGroupId INTEGER
  atDHCPMacRuleVLANId INTEGER
  atDHCPMacRuleIndex INTEGER
  atDHCPMacRuleMacAddress MacAddress
  atDHCPMacRuleMacAddressState INTEGER

AtVIPRouterEntry  
SEQUENCE    
  atvIPRouterVLanGroup INTEGER
  atvIPRouterVLan INTEGER
  atvIPRouterProtocol OCTET STRING
  atvIPRouterNetAddress IpAddress
  atvIPRouterSubNetMask IpAddress
  atvIPRouterBcastAddress IpAddress
  atvIPRouterDescription DisplayString
  atvIPRouterAdmStatus XylanVlanAdminStatCodes
  atvIPRouterOperStatus XylanVlanOperStatCodes
  atvIPRouterFramingType INTEGER
  atvIPRouterRipConfigMode INTEGER
  atvIPRouterRelayServicesFwd INTEGER

AtVIPXRouterEntry  
SEQUENCE    
  atvIPXRouterVLanGroup INTEGER
  atvIPXRouterVLan INTEGER
  atvIPXRouterProtocol INTEGER
  atvIPXRouterNetAddress NetNumber
  atvIPXRouterFramingType INTEGER
  atvIPXRouterDescription DisplayString
  atvIPXRouterAdmStatus XylanVlanAdminStatCodes
  atvIPXRouterOperStatus XylanVlanOperStatCodes
  atvIPXSrcRteType INTEGER

V80210ServicesEntry  
SEQUENCE    
  v80210ServicesSlot INTEGER
  v80210ServicesStation INTEGER
  v80210ServicesDescription DisplayString
  v80210ServicesBridgeID INTEGER

V80210VlanEntry  
SEQUENCE    
  v80210Slot INTEGER
  v80210Station INTEGER
  v80210LanNumber INTEGER
  v80210Command INTEGER

VDBrServicesEntry  
SEQUENCE    
  vDBrServicesSlot INTEGER
  vDBrServicesStation INTEGER
  vDBrServicesDescription DisplayString
  vDBrServicesBridgeID INTEGER

VDBrVlanEntry  
SEQUENCE    
  vDBrSlot INTEGER
  vDBrStation INTEGER
  vDBrLanNumber INTEGER
  vDBrCommand INTEGER

QGroupEntry  
SEQUENCE    
  qGroupSlot INTEGER
  qGroupPort INTEGER
  qGroupGroupId INTEGER
  qGroupMode INTEGER
  qGroupDescription DisplayString
  qGroupTag INTEGER
  qGroupPriority INTEGER
  qGroupAdminStatus INTEGER
  qGroupTxPkts Counter
  qGroupRxPkts Counter
  qGroupTxOctets Counter
  qGroupRxOctets Counter

PmapIngressEntry  
SEQUENCE    
  pMapIngressId INTEGER
  pMapIngressSlot INTEGER
  pMapIngressPort INTEGER
  pMapIngressSrvc INTEGER
  pMapIngressInst INTEGER
  pMapIngressAdminStatus INTEGER

PmapEgressEntry  
SEQUENCE    
  pMapEgressId INTEGER
  pMapEgressSlot INTEGER
  pMapEgressPort INTEGER
  pMapEgressSrvc INTEGER
  pMapEgressInst INTEGER
  pMapEgressAdminStatus INTEGER

PmapConfigEntry  
SEQUENCE    
  pMapConfigId INTEGER
  pMapConfigStatus INTEGER

Defined Values

vLanInfo 1.3.6.1.4.1.800.2.2.1
OBJECT IDENTIFIER    

vIPRouterInfo 1.3.6.1.4.1.800.2.2.2
OBJECT IDENTIFIER    

vIPXRouterInfo 1.3.6.1.4.1.800.2.2.3
OBJECT IDENTIFIER    

vBrdgInfo 1.3.6.1.4.1.800.2.2.4
OBJECT IDENTIFIER    

vStpInfo 1.3.6.1.4.1.800.2.2.5
OBJECT IDENTIFIER    

vRipInfo 1.3.6.1.4.1.800.2.2.7
OBJECT IDENTIFIER    

vSr 1.3.6.1.4.1.800.2.2.8
OBJECT IDENTIFIER    

vTrunking 1.3.6.1.4.1.800.2.2.9
OBJECT IDENTIFIER    

vAutoTracker 1.3.6.1.4.1.800.2.2.10
OBJECT IDENTIFIER    

atvIPRouterInfo 1.3.6.1.4.1.800.2.2.11
OBJECT IDENTIFIER    

atvIPXRouterInfo 1.3.6.1.4.1.800.2.2.12
OBJECT IDENTIFIER    

v80210 1.3.6.1.4.1.800.2.2.13
OBJECT IDENTIFIER    

vDBr 1.3.6.1.4.1.800.2.2.14
OBJECT IDENTIFIER    

v8021Q 1.3.6.1.4.1.800.2.2.15
OBJECT IDENTIFIER    

vDupMac 1.3.6.1.4.1.800.2.2.16
OBJECT IDENTIFIER    

vPmap 1.3.6.1.4.1.800.2.2.17
OBJECT IDENTIFIER    

vLanCurrentNumber 1.3.6.1.4.1.800.2.2.1.1
The current instance of Virtual LAN which corresponds to vLanNumber in object type vLanEntry. All the Bridging, Spanning Tree, and interface parameters refered thereafter will be referenced from this instance only. Default value upon the OmniSwitch power up is 1. It must be set to the desired value before any access to the rest of the virtual LAN system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vLanTable 1.3.6.1.4.1.800.2.2.1.2
A list of Virtual LAN instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLanEntry

vLanEntry 1.3.6.1.4.1.800.2.2.1.2.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VLanEntry  

vLanNumber 1.3.6.1.4.1.800.2.2.1.2.1.1
The VLAN number identifying this instance. Valid range from 1 to 65535.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vLanBridgeAddress 1.3.6.1.4.1.800.2.2.1.2.1.2
The MAC address used by the instance of VLAN which specified in vLanCurrentNumber when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this VLAN. However it is only required to be unique. When concatenated with vStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

vLanBridgeType 1.3.6.1.4.1.800.2.2.1.2.1.3
Indicates what type of bridging this VLAN can perform. If a VLAN is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), transparent-only(3), sourceroute-only(4), srt(5), not-supported(6)  

vLanDescription 1.3.6.1.4.1.800.2.2.1.2.1.4
Textual description of the VLAN instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

vLanAdmStatus 1.3.6.1.4.1.800.2.2.1.2.1.5
The administrative status which can be set by configuration. Disable(1) will disable ALL vports that are connected to this VLAN, enable(2) will enable ALL ports on this VLAN, delete(3) will dettach and delete the ports/routers AND remove the VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanAdminStatCodes  

vLanOperStatus 1.3.6.1.4.1.800.2.2.1.2.1.6
Provide operating status of a particular VLAN environment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanVlanOperStatCodes  

vLanMode 1.3.6.1.4.1.800.2.2.1.2.1.7
Provides special operating mode setup and status. Currently this object is used to specify weather the VLAN supports the standard or ATM CIP connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanModes  

vLanFloodOverride 1.3.6.1.4.1.800.2.2.1.2.1.8
Provides the flood limit value for all virtual ports that belong to the specied VLAN. The number is given in bytes per second. -1 and 0 have a special meaning. -1 means use the default or configured flood limit for each virtual port that belongs to the specified VLAN. 0 disables flood limiting on all virtual ports that belong to the specifed VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vLanRouterAddress 1.3.6.1.4.1.800.2.2.1.2.1.9
The user-configured MAC address used by the the VLAN's router port (IP / IPX). If this value has not been configured, the value returned is zero and this VLAN's router port will use a factory provided default value. The address should be specified in canonical order.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

vLanMobileGroup 1.3.6.1.4.1.800.2.2.1.2.1.10
If set to enabled, makes this a mobile group. If set to disabled, makes this a non-mobile gropu.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vLanAuthGroup 1.3.6.1.4.1.800.2.2.1.2.1.11
If set to enable, makes this a authenticated group. If set to disable, makes this a non-authenticated group. For it to be set to enable, the group should be a mobile group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vLanAuthGroupProtocol 1.3.6.1.4.1.800.2.2.1.2.1.12
If a NULL string is returned as the value, this object is not applicable to that group. The contents of the string can interpreted based on the first byte. if the first byte is 1, the protocol is IP ( for all encaps ). 2, the protocol is IPX 3, the protocol is DECNET 4, the protocol is APPLETALK 5, the protocol is specified as an Ether-Type value with the next two bytes indicating the ether-type value, for e.g banyan vines ether-type will be specified as 08 0B AD 6, the protocol is specified using dsap and ssap values with the next two bytes giving the dsap and ssap value respectively, for e.g for banyan vines llc encap, it would look like 09 BC BC. 7, the protocol is specified using snap header with the next 5 bytes indicating the snap header for that protocol. For e.g if banyan vines snap has to be specified, it would look like, 0A 00 00 00 80 C4. FF, for all protocols.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vLanStpStatus 1.3.6.1.4.1.800.2.2.1.2.1.13
Indicates status of spanning tree for the current VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

vLanBrdgTpExtendedAgeingTime 1.3.6.1.4.1.800.2.2.1.2.1.14
The AutoTracker extended ageing timer. This value indicates how long the switch will remember the mac address and its associated vlan information. The default value is 1200 secs. This means that the mac information will be remembered for (vLanBrdgTpExtendedAgeingTime - vBrdgTpAgingTime) seconds after the mac is aged out. This value must be set to a value greater than or equal to vBrdgTpAgingTime.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000000  

vLanPriority 1.3.6.1.4.1.800.2.2.1.2.1.15
This is the priority of the given VLAN. It can be any one level from 0 to 7 with 0 being the lowest and 7 being the highest
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vLanNextFreeNumber 1.3.6.1.4.1.800.2.2.1.3
This is the next unused VLAN number. Typically this will be used to create a new VLAN with the next highest number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vIPRouterTable 1.3.6.1.4.1.800.2.2.2.1
A list of Virtual Router instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VIPRouterEntry

vIPRouterEntry 1.3.6.1.4.1.800.2.2.2.1.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VIPRouterEntry  

vIPRouterVLan 1.3.6.1.4.1.800.2.2.2.1.1.1
VLAN ID for this vIPRouterEntry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vIPRouterProtocol 1.3.6.1.4.1.800.2.2.2.1.1.2
The routing protocol(s) for this virtual router port. Each IP router port can carry one or more routing protocols. This will be represented by the logical ORing of each protocol number. Which are: ipOther(1), ipRip(2), ipEgp(4), ipGgp(8), ipHello(16), ipIs-is(32), ipEs-is(64), ipCiscoIgrp(128), ipBbnSpfIgp(256), ipOigp(512)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

vIPRouterNetAddress 1.3.6.1.4.1.800.2.2.2.1.1.3
The IP network address for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vIPRouterSubNetMask 1.3.6.1.4.1.800.2.2.2.1.1.4
The IP network subnet mask for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vIPRouterBcastAddress 1.3.6.1.4.1.800.2.2.2.1.1.5
The IP broadcast address for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vIPRouterDescription 1.3.6.1.4.1.800.2.2.2.1.1.6
Textual description of the router instance.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

vIPRouterAdmStatus 1.3.6.1.4.1.800.2.2.2.1.1.7
The particular routing environment can be enable(2) or disable(1) (or delete (3)) upon user's request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanAdminStatCodes  

vIPRouterOperStatus 1.3.6.1.4.1.800.2.2.2.1.1.8
Provide operating status of a particular router envirnment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanVlanOperStatCodes  

vIPRouterFramingType 1.3.6.1.4.1.800.2.2.2.1.1.9
Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet 2. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-2(1), ethernet-802-3(2), fddi(3), token-ring(4), token-ring-source-routed(5), atm-1483(6)  

vIPRouterRipConfigMode 1.3.6.1.4.1.800.2.2.2.1.1.10
RIP's operational mode. 'silent' means that RIP listens for routing updates but does not send them. 'deaf' means that RIP sends routing updates but not listen to them. 'active' means that RIP both sends and receives routing updates, and 'inactive' means that RIP is not operational on the given virtual LAN. The default is 'simple'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER silent(1), deaf(2), active(3), inactive(4)  

vIPRouterRelayTable 1.3.6.1.4.1.800.2.2.2.2
A list of UDP Relay Service instances.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VIPRouterRelayEntry

vIPRouterRelayEntry 1.3.6.1.4.1.800.2.2.2.2.1
A UDP Relay Service entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VIPRouterRelayEntry  

vIPRouterRelayService 1.3.6.1.4.1.800.2.2.2.2.1.1
This specifies the UDP Relay Service to be forwarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  VIPRouterRelayServType  

vIPRouterRelayMode 1.3.6.1.4.1.800.2.2.2.2.1.2
This controls whether the internal UDP Relay service is enabled or disabled. When enabled, the service will forward packets to a specified server (or specified broadcast address.) or VLAN. Note that for BOOTP/DHCP service, unless the relay's next hop ip address (vIPRouterRelayForwAddr) is set to a valid value, it will not possible to enable the relay. For other services, a VLAN to forwared to (vIPRouterRelayForwVlan in vIPRouterRelayForwTable) or a next hop ip address must be set. The mode definitions are as follows: 1 - enabled 2 - configureRequest 3 - underConfiguration 4 - disabled A manager will set the state to configureRequest(2) before attempting to configure any other parameters for a particular UPD Service. The agent will then set the state to underConfiguration(3). When in the underConfiguration(3) state, a UDP service is not completely configured and will remain in this state until the management station is finished configuring and sets the state to either enabled(1) or disabled(4). A manager is restricted to changing the state of an entry in the following ways: config under To: valid Request config invalid From: valid OK NO OK OK configRequest N/A N/A N/A N/A underConfig OK NO OK OK invalid NO OK NO OK
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vIPRouterRelayNextHop 1.3.6.1.4.1.800.2.2.2.2.1.3
This sets the relay's forwarding address. It can either be set to a distinct IP address (e.g. the address of a server), to an IP broadcast address or a VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vIPRouterRelayParam1 1.3.6.1.4.1.800.2.2.2.2.1.4
This sets the BOOTP/DHCP relay's maximum hops forwarding limit. If a BOOT/DHCP frame arrives with hopcount greater than or equal to vIPRouterRelayParam1, it will be dropped. For BOOTP/DHCP the legal range is 1..16. For Generic services, this sets the port number to be forwarded. The legal range is -1..65535 with -1 indicating the unset state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..65535  

vIPRouterRelayParam2 1.3.6.1.4.1.800.2.2.2.2.1.5
This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored. It is typically set as seconds, but the value is totally client dependent. The relay will not forward frames until client frames have 'secs' field set to at least the value of vIPRouterRelayParam2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vIPRouterRelayDescription 1.3.6.1.4.1.800.2.2.2.2.1.6
This sets the service description for generic services. For other services, the description is fixed and may only be read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

vIPXRouterTable 1.3.6.1.4.1.800.2.2.3.1
A list of Virtual Router instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VIPXRouterEntry

vIPXRouterEntry 1.3.6.1.4.1.800.2.2.3.1.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VIPXRouterEntry  

vIPXRouterVLan 1.3.6.1.4.1.800.2.2.3.1.1.1
VLAN ID for this vIPXRouterEntry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vIPXRouterProtocol 1.3.6.1.4.1.800.2.2.3.1.1.2
The routing protocol(s) for this virtual router port. Each IPX router port can carry one or more routing protocols. This will be represented by the logical ORing of each protocol number. Which are: ipxNone(1), ipxRipOnly(2), ipxRipAndSap(3), ipxTriggered(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vIPXRouterNetAddress 1.3.6.1.4.1.800.2.2.3.1.1.3
The IPX network address for this virtual bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

vIPXRouterFramingType 1.3.6.1.4.1.800.2.2.3.1.1.4
Provides the ability to set the outbound frame type for IPX traffic. The default frame type is 802.2 Novell Raw. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-2(1), ethernet-802-3-llc(2), ethernet-802-3-snap(3), ethernet-802-3-raw(4), fddi-snap(5), fddi-snap-sr(6), fddi-llc(7), fddi-llc-sr(8), token-ring-snap(9), token-ring-snap-sr(10), token-ring-llc(11), token-ring-llc-sr(12)  

vIPXRouterDescription 1.3.6.1.4.1.800.2.2.3.1.1.5
Textual description of the router instance.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

vIPXRouterAdmStatus 1.3.6.1.4.1.800.2.2.3.1.1.6
The particular routing environment can be enabled(2) or disabled(1) upon user's request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanAdminStatCodes  

vIPXRouterOperStatus 1.3.6.1.4.1.800.2.2.3.1.1.7
Provide operating status of a particular router environment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanVlanOperStatCodes  

vIPXSrcRteType 1.3.6.1.4.1.800.2.2.3.1.1.8
Provide the ability to set the type of source routing broadcasts between AllRoutesExplorer(0) and SpanningTreeExplorer(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER are(1), ste(2), not-applicable(3)  

vBrdgTpLearnEntryDiscards 1.3.6.1.4.1.800.2.2.4.1
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vBrdgTpAgingTime 1.3.6.1.4.1.800.2.2.4.2
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000000  

vBrdgTpFdbTable 1.3.6.1.4.1.800.2.2.4.3
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function within its VLAN in determining how to propagate a received frame.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VBrdgTpFdbEntry

vBrdgTpFdbEntry 1.3.6.1.4.1.800.2.2.4.3.1
Information about a specific unicast MAC address for which the VLAN bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VBrdgTpFdbEntry  

vBrdgTpFdbGroupId 1.3.6.1.4.1.800.2.2.4.3.1.1
The GroupId for this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbAddress 1.3.6.1.4.1.800.2.2.4.3.1.2
A unicast MAC address for which the VLAN bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

vBrdgTpFdbRcvPortSlot 1.3.6.1.4.1.800.2.2.4.3.1.3
The slot number of the port that vBrdgTpFdbAddress is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbRcvPortIF 1.3.6.1.4.1.800.2.2.4.3.1.4
The on-board interface number of the port that vBrdgTpFdbAddress is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbRcvPortFuncTyp 1.3.6.1.4.1.800.2.2.4.3.1.5
The service type of the port that vBrdgTpFdbAddress is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanPortFuncCodes  

vBrdgTpFdbRcvPortFuncTypInst 1.3.6.1.4.1.800.2.2.4.3.1.6
The service type instance of the port that vBrdgTpFdbAddress is received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbRcvStatus 1.3.6.1.4.1.800.2.2.4.3.1.7
The status of this entry. Xylan does not support other(1) and self(4). The meanings of the values are: invalid(2) : this entry is no longer valid, but has not yet been flushed from the table. learned(3) : this entry has been learned. mgmt(5) : this entry is configured as a static entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

vBrdgTpFdbRcvVLANMembership 1.3.6.1.4.1.800.2.2.4.3.1.8
The Auto-Tracker VLAN membership for this device. Each bit that is set in this objects 32 bit value indicates that the device is part of the VLAN given by that bits position.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbDupStatus 1.3.6.1.4.1.800.2.2.4.3.1.9
The variable indicates if vBrdgTpFdbAddress is a duplicate Mac.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vBrdgTpFdbLastSeenTime 1.3.6.1.4.1.800.2.2.4.3.1.10
The time since, the specific unicast MAC address for which the VLAN bridge has forwarding information was last seen.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vBrdgStaticTable 1.3.6.1.4.1.800.2.2.4.4
A table contains source addresses which can be configured to stay permanent (not aging out) in the Forwarding table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VBrdgStaticEntry

vBrdgStaticEntry 1.3.6.1.4.1.800.2.2.4.4.1
Information about a specific unicast MAC address for which the VLAN bridge has VLAN information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VBrdgStaticEntry  

vBrdgStaticAddress 1.3.6.1.4.1.800.2.2.4.4.1.1
The MAC address which the static status applies.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

vBrdgStaticPortSlot 1.3.6.1.4.1.800.2.2.4.4.1.2
The slot number of the port that vBrdgStaticAddress applies. Entering this entry allows the MAC address to set in this port. If this entry is provided, vBrdgStaticPortIF, vBrdgStaticPortFuncTyp and vBrdgStaticPortFuncTypInst must also be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vBrdgStaticPortIF 1.3.6.1.4.1.800.2.2.4.4.1.3
The on-board interface of the port that vBrdgStaticAddress applies. Entering this entry allows the MAC address to set in this port. If this entry is set, vBrdgStaticPortSlot, vBrdgStaticPortFuncTyp and vBrdgStaticPortFuncTypInst must also be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vBrdgStaticPortFuncTyp 1.3.6.1.4.1.800.2.2.4.4.1.4
The service type of the port that vBrdgStaticAddress applies. Entering this entry allows the MAC address to set in this port. If this entry is set, vBrdgStaticPortSlot, vBrdgStaticPortIF and vBrdgStaticPortFuncTypInst must also be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanPortFuncCodes  

vBrdgStaticPortFuncTypInst 1.3.6.1.4.1.800.2.2.4.4.1.5
The service type instance of the port that vBrdgStaticAddress applies. Entering this entry allows the MAC address to set in this port. If this entry is set, vBrdgStaticPortSlot, vBrdgStaticPortIF and vBrdgStaticPortFuncTyp must also be set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vBrdgStaticStatus 1.3.6.1.4.1.800.2.2.4.4.1.6
This object indicates the status of this entry. Xylan does not support other(1). The default value is permenent(3). invalid(2) - writing this value to the object removes the entry. permanent(3) - this entry will never age out and remain even after next reset. deleteOnReset(4) - this entry will not age out until reset. deleteOnTimeout(5) - write this value to the entry will cause it to age out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

vBrdgTpATVLANAgeingTime 1.3.6.1.4.1.800.2.2.4.5
The AutoTracker extended ageing timer. This value indicates how long the switch will remember the mac address and its associated vlan information. The default value is 1200 secs. This means that the mac information will be remembered for (vBrdgTpATVLANAgeingTime - vBrdgTpAgingTime) seconds after the mac is aged out. This value must be set to a value greater than or equal to vBrdgTpAgingTime.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000000  

vStpProtocolSpecification 1.3.6.1.4.1.800.2.2.5.1
The version of the Spanning Tree Protocol implemented for the Xylan products. The IEE 802.1d implementation is the only version supported. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

vStpPriority 1.3.6.1.4.1.800.2.2.5.2
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of vLanBridgeAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vStpBridgeAddress 1.3.6.1.4.1.800.2.2.5.3
The bridge identifier of this VLAN of the spanning tree as determined by the Spanning Tree Protocol as executed by this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

vStpTimeSinceTopologyChange 1.3.6.1.4.1.800.2.2.5.4
The time (in hundredths of a second) since the last time a topology change was detected by the VLAN bridge entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

vStpTopChanges 1.3.6.1.4.1.800.2.2.5.5
The total number of topology changes detected by this VLAN bridge since the management entity was last reset or initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vStpDesignatedRoot 1.3.6.1.4.1.800.2.2.5.6
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this VLAN. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

vStpRootCost 1.3.6.1.4.1.800.2.2.5.7
The cost of the path to the root as seen from this VLAN bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpRootPortSlot 1.3.6.1.4.1.800.2.2.5.8
The slot number of the port which offers the lowest cost path from this VLAN bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpRootPortIF 1.3.6.1.4.1.800.2.2.5.9
The on-board interface of the port which offers the lowest cost path from this VLAN bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpRootPortFuncTyp 1.3.6.1.4.1.800.2.2.5.10
The service type of the port which offers the lowest cost path from this VLAN bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanPortFuncCodes  

vStpRootPortFuncTypInst 1.3.6.1.4.1.800.2.2.5.11
The service type instance of the port which offers the lowest cost path from this VLAN bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpMaxAge 1.3.6.1.4.1.800.2.2.5.12
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

vStpHelloTime 1.3.6.1.4.1.800.2.2.5.13
The amount of time between the transmission of Configuration bridge PDUs by this VLAN on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this VLAN is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

vStpHoldTime 1.3.6.1.4.1.800.2.2.5.14
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this VLAN, in units of hundredths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpForwardDelay 1.3.6.1.4.1.800.2.2.5.15
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to vStpBridgeForwardDelay which is the value that this VLAN and all others would start using if/when this bridge were to become the root.]
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpBridgeMaxAge 1.3.6.1.4.1.800.2.2.5.16
The value that all bridges use for MaxAge when this VLAN is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of vStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

vStpBridgeHelloTime 1.3.6.1.4.1.800.2.2.5.17
The value that all VLANs use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

vStpBridgeForwardDelay 1.3.6.1.4.1.800.2.2.5.18
The value that all VLANs use for ForwardDelay when this VLAN is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of vStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

vStpPortTable 1.3.6.1.4.1.800.2.2.5.19
A table that contains port-specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VStpPortEntry

vStpPortEntry 1.3.6.1.4.1.800.2.2.5.19.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VStpPortEntry  

vStpPortSlot 1.3.6.1.4.1.800.2.2.5.19.1.1
The slot number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortIF 1.3.6.1.4.1.800.2.2.5.19.1.2
The on-board interface number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortFuncTyp 1.3.6.1.4.1.800.2.2.5.19.1.3
The service type of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortFuncTypInst 1.3.6.1.4.1.800.2.2.5.19.1.4
The service type instance of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortPriority 1.3.6.1.4.1.800.2.2.5.19.1.5
The priority of this port which used originally as part of the port ID specified in 802.1D.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vStpPortState 1.3.6.1.4.1.800.2.2.5.19.1.6
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. For ports which are disabled (see vStpPortEnable), this object will have a value of disabled(1). Xylan does not support the broken(6) state as defined in RFC1493.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5)  

vStpPortEnable 1.3.6.1.4.1.800.2.2.5.19.1.7
The enabled/disabled status of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vStpPortPathCost 1.3.6.1.4.1.800.2.2.5.19.1.8
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vStpPortDesignatedRoot 1.3.6.1.4.1.800.2.2.5.19.1.9
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

vStpPortDesignatedCost 1.3.6.1.4.1.800.2.2.5.19.1.10
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortDesignatedBridge 1.3.6.1.4.1.800.2.2.5.19.1.11
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

vStpPortDesignatedPtPrio 1.3.6.1.4.1.800.2.2.5.19.1.12
The priority portion of the port ID on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortDesignatedPtSlot 1.3.6.1.4.1.800.2.2.5.19.1.13
The slot of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortDesignatedPtIF 1.3.6.1.4.1.800.2.2.5.19.1.14
The on-board interface number of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortDesignatedPtFuncTyp 1.3.6.1.4.1.800.2.2.5.19.1.15
The service type of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanPortFuncCodes  

vStpPortDesignatedPtFuncTypInst 1.3.6.1.4.1.800.2.2.5.19.1.16
The service type instance of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpPortForwardTransitions 1.3.6.1.4.1.800.2.2.5.19.1.17
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vStpLanMode 1.3.6.1.4.1.800.2.2.5.20
Indicates which type of spanning tree (IEEE or IBM) is to be used for the current VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ieee-stap(1), ibm-stap(2)  

vStpStatus 1.3.6.1.4.1.800.2.2.5.21
Indicates status of spanning tree for the current VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanOperStatCodes  

vRipInfoTable 1.3.6.1.4.1.800.2.2.7.1
A list of Virtual LAN instances for RIP statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRipInfoEntry

vRipInfoEntry 1.3.6.1.4.1.800.2.2.7.1.1
A VLAN entry for RIP statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VRipInfoEntry  

vRipInfovLanNumber 1.3.6.1.4.1.800.2.2.7.1.1.1
The VLAN number identifying this instance. Valid range from 1 to 65535.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vRipInPkts 1.3.6.1.4.1.800.2.2.7.1.1.2
The number of RIP routing updates and requests received on this virtual LAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipOutPkts 1.3.6.1.4.1.800.2.2.7.1.1.3
The number of RIP routing updates and requests sent on this virtual LAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadSize 1.3.6.1.4.1.800.2.2.7.1.1.4
The number of RIP packets received on this virtual LAN whose size was incorrect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadVersion 1.3.6.1.4.1.800.2.2.7.1.1.5
The number of RIP packets received on this virtual LAN whose version number was incorrect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipNonZero 1.3.6.1.4.1.800.2.2.7.1.1.6
The number of RIP packets received on this virtual LAN which contained a non-zero value in one of the 'must be zero' fields.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadFamily 1.3.6.1.4.1.800.2.2.7.1.1.7
The number of RIP packets received on this virtual LAN which contained a bad value for the family type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadMetric 1.3.6.1.4.1.800.2.2.7.1.1.8
The number of RIP packets received on this virtual LAN which contained a bad value for a route's metric.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadAddr 1.3.6.1.4.1.800.2.2.7.1.1.9
The number of RIP packets received on this virtual LAN whose host portion of the source IP address is bad.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipBadCommand 1.3.6.1.4.1.800.2.2.7.1.1.10
The number of RIP packets received on this virtual LAN whose command type was neither a request nor a response.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vRipTransmitsFailed 1.3.6.1.4.1.800.2.2.7.1.1.13
The number of RIP routing updaates or requests that the OmniSwitch was unable to transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrTable 1.3.6.1.4.1.800.2.2.8.1
A table that contains information about every virtual port that is associated with this source route switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VSrPortEntry

vSrSapFilterEnable 1.3.6.1.4.1.800.2.2.8.2
A scalar value to enable or disable the SAP filtering feature in this source route switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2), turnOffAndClearAll(3)  

vSrPortEntry 1.3.6.1.4.1.800.2.2.8.1.1
A list of information for each virtual port of a source route switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VSrPortEntry  

vSrSlot 1.3.6.1.4.1.800.2.2.8.1.1.1
The physical slot number of the port for which this entry contains Source Route management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

vSrInterface 1.3.6.1.4.1.800.2.2.8.1.1.2
The on-board interface number of the port for which this entry contains Source Route management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

vSrFuncType 1.3.6.1.4.1.800.2.2.8.1.1.3
The service type of the port for which this entry contains Source Route management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

vSrInstance 1.3.6.1.4.1.800.2.2.8.1.1.4
The service type instance of the port for which this entry contains Source Route management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vSrHopCount 1.3.6.1.4.1.800.2.2.8.1.1.5
The maximum number of routing descriptors allowed in an All Paths or Spanning Tree Explorer frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrLocalSegment 1.3.6.1.4.1.800.2.2.8.1.1.6
The segment number that uniquely identifies the segment to which this virtual port is connected. Current source routing protocols limit this value to the range: 0 through 4095. (The value 0 is used by some management applications for special test cases.) A value of 65535 signifies that no segment number is assigned to this virtual port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrBridgeNum 1.3.6.1.4.1.800.2.2.8.1.1.7
A bridge number uniquely identifies a bridge when more than one bridge is used to span the same two segments. Current source routing protocols limit this value to the range: 0 through 15. A value of 65535 signifies that no bridge number is assigned to this bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrVirtualRing 1.3.6.1.4.1.800.2.2.8.1.1.8
This is to indicate whether the ring that this virtual port is connected to is virtual or physical 1 = virtual 2 = physical.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrLargestFrame 1.3.6.1.4.1.800.2.2.8.1.1.9
The maximum size of the INFO field (LLC and above) that this virtual port can send/receive. It does not include any MAC level (framing) octets. The value of this object is used by this bridge to determine whether a modification of the LargestFrame (LF, see [14]) field of the Routing Control field of the Routing Information Field is necessary. 64 valid values are defined by the IEEE 802.5M SRT Addendum: 516, 635, 754, 873, 993, 1112, 1231, 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906, 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812, 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197, 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587, 10997, 11407, 12199, 12992, 13785, 14578, 15370, 16163, 16956, 17749, 20730, 23711, 26693, 29674, 32655, 35637, 38618, 41600, 44591, 47583, 50575, 53567, 56559, 59551, and 65535. An illegal value will not be accepted by the bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrSTESpanMode 1.3.6.1.4.1.800.2.2.8.1.1.10
Determines how this virtual port behaves when presented with a Spanning Tree Explorer frame. The value 'disabled(2)' indicates that the virtual port will not accept or send Spanning Tree Explorer packets; any STE packets received will be silently discarded. The value 'forced(3)' indicates the virtual port will always accept and propagate Spanning Tree Explorer frames. This allows a manually configured Spanning Tree for this class of packet to be configured. Note that unlike transparent bridging, this is not catastrophic to the network if there are loops. The value 'auto-span(1)' can only be returned by a bridge that both implements the Spanning Tree Protocol and has use of the protocol enabled on this virtual port. The behavior of the virtual port for Spanning Tree Explorer frames is determined by the state of vStpPortState. If the virtual port is in the 'forwarding' state, the frame will be accepted or propagated. Otherwise, it will be silently discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto-span(1), disabled(2), forced(3)  

vSrSpecInFrames 1.3.6.1.4.1.800.2.2.8.1.1.11
The number of Specifically Routed frames, also referred to as Source Routed Frames, that have been received from this virtual port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrSpecOutFrames 1.3.6.1.4.1.800.2.2.8.1.1.12
The number of Specifically Routed frames, also referred to as Source Routed Frames, that this virtual port has transmitted on its segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrApeInFrames 1.3.6.1.4.1.800.2.2.8.1.1.13
The number of All Paths Explorer frames, also referred to as All Routes Explorer frames, that have been received by this virtual port from its segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrApeOutFrames 1.3.6.1.4.1.800.2.2.8.1.1.14
The number of all Paths Explorer Frames, also referred to as All Routes Explorer frames, that have been transmitted by this virtual port on its segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrSteInFrames 1.3.6.1.4.1.800.2.2.8.1.1.15
The number of spanning tree explorer frames that have been received by this virtual port from its segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrSteOutFrames 1.3.6.1.4.1.800.2.2.8.1.1.16
The number of spanning tree explorer frames that have been transmitted by this virtual port on its segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrInvalidRif 1.3.6.1.4.1.800.2.2.8.1.1.17
The number of explorer frames that have been discarded by this virtual port because the routing Information field contained an invalid value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrDuplicateSegmentDiscards 1.3.6.1.4.1.800.2.2.8.1.1.18
The number of frames that have been discarded by this virtual port because the routing descriptor field contained a duplicate segment identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrHopCountExceededDiscards 1.3.6.1.4.1.800.2.2.8.1.1.19
The number of explorer frames that have been discarded by this virtual port because the Routing Information Field has exceeded the maximum route descriptor length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrDupLanIdOrTreeErrors 1.3.6.1.4.1.800.2.2.8.1.1.20
The number of duplicate LAN IDs or Tree errors. This helps in detection of problems in networks containing older IBM Source Routing Bridges.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrLanIdMismatches 1.3.6.1.4.1.800.2.2.8.1.1.21
The number of ARE and STE frames that were discarded because the last LAN ID in the routing information field did not equal the LAN-in ID. This error can occur in implementations which do only a LAN-in ID and Bridge Number check instead of a LAN-in ID, Bridge Number, and LAN-out ID check before they forward broadcast frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSrBridgeLfMode 1.3.6.1.4.1.800.2.2.8.1.1.22
Indicates whether the bridge operates using older 3 bit length negotiation fields or the newer 6 bit length field in its RIF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER mode3(1), mode6(2)  

vSrPortType 1.3.6.1.4.1.800.2.2.8.1.1.23
Indicates whether this port is a SRT or SR only SRT = 1 SR = 2
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrAREblock 1.3.6.1.4.1.800.2.2.8.1.1.24
Indicates whether this port would treat ARE frames exactly like STE frames which would be blocked if the Spanning Tree mode is blocking. 1 - this port would not block ARE. 2 - this port would block ARE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrHopCountIn 1.3.6.1.4.1.800.2.2.8.1.1.25
The maximum number of routing descriptors allowed in an inbound All Paths or Spanning Tree Explorer frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrSapDenyFilter1 1.3.6.1.4.1.800.2.2.8.1.1.26
Packets with this SAP value are to be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrSapDenyFilter2 1.3.6.1.4.1.800.2.2.8.1.1.27
Packets with this SAP value are to be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrSapPermitFilter1 1.3.6.1.4.1.800.2.2.8.1.1.28
Packets without this SAP value are to be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vSrSapPermitFilter2 1.3.6.1.4.1.800.2.2.8.1.1.29
Packets without this SAP value are to be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vTrunkingServicesTable 1.3.6.1.4.1.800.2.2.9.1
A list of commands to add or remove Virtual LANs from a trunking service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VTrunkingServicesEntry

vTrunkingServicesEntry 1.3.6.1.4.1.800.2.2.9.1.1
A trunking services entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VTrunkingServicesEntry  

vTrunkingServicesSlot 1.3.6.1.4.1.800.2.2.9.1.1.1
The slot number (1-based) of the physical port providing the trunking service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTrunkingServicesStation 1.3.6.1.4.1.800.2.2.9.1.1.2
The station number (1-based) within the physical port providing the trunking service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTrunkingServicesDescription 1.3.6.1.4.1.800.2.2.9.1.1.3
A description of the trunking service being provided.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

vTrunkingServicesBridgeID 1.3.6.1.4.1.800.2.2.9.1.1.4
The VLAN ID of the Virtual Bridge port for the given trunking service. A value of 0 means that the Virtual Bridge port does not exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vTrunkingVlanTable 1.3.6.1.4.1.800.2.2.9.2
A list of commands to add or remove Virtual LANs from a trunking service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VTrunkingVlanEntry

vTrunkingVlanEntry 1.3.6.1.4.1.800.2.2.9.2.1
A trunking Virtual LAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VTrunkingVlanEntry  

vTrunkingSlot 1.3.6.1.4.1.800.2.2.9.2.1.1
The slot number (1-based) of the physical port providing the trunking service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTrunkingStation 1.3.6.1.4.1.800.2.2.9.2.1.2
The station number (1-based) within the physical port providing the trunking service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTrunkingLanNumber 1.3.6.1.4.1.800.2.2.9.2.1.3
The VLAN ID to be added to or removed from the given trunking service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vTrunkingCommand 1.3.6.1.4.1.800.2.2.9.2.1.4
The command to either add or remove the specified VLAN ID from the given trunking service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), remove(2)  

atportRuleTable 1.3.6.1.4.1.800.2.2.10.1
This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtportRuleEntry

atportRuleEntry 1.3.6.1.4.1.800.2.2.10.1.1
An entry in the atportRuleTable. Each entry in this table identifies exactly one port that is part of the VLAN definition. Hence all the entries of this table with the same GroupId and VLANId collectively define one VLAN which is based on a Port Rule. A specific port can be included in definition of more than one vlan as long as those two vlans are part of the same VLAN group. That is to say, a port can belong to more than one vlan but can be part of atmost one VLAN group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtportRuleEntry  

atportRuleGroupId 1.3.6.1.4.1.800.2.2.10.1.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atportRuleVLANId 1.3.6.1.4.1.800.2.2.10.1.1.2
This object is the VLAN defined by this port-rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atportRuleIdx 1.3.6.1.4.1.800.2.2.10.1.1.3
This object indicates the exact port-rule for this VLAN. There can be more than one port-rule defined for this VLAN. This object identifies the port rule of which the port is part of. When creating a VLAN using this table, this value should be set to 0 to indicate that this is a new port rule. If the port rule needs to be modified, then this object will be the port rule to modify.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atportRulePortId 1.3.6.1.4.1.800.2.2.10.1.1.4
This object defines the Virtual port that is part of this PORT rule. The first octet gives the slot number on which the port resides, the second being the physical interface, third octet being the service and the fourth being the instance of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

atportRulePortState 1.3.6.1.4.1.800.2.2.10.1.1.5
This object indicates whether this perticular rule is being used as part this VLANs definition. When set to disabled, this rule is not used as part of this vlans definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atMacRuleTable 1.3.6.1.4.1.800.2.2.10.2
This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtMacRuleEntry

atMacRuleEntry 1.3.6.1.4.1.800.2.2.10.2.1
An entry in the atMacRuleTable. Each entry in this table identifies exactly one MAC address. All entries in this table with the same GroupId and VLANId collectively define a VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtMacRuleEntry  

atMacRuleGroupId 1.3.6.1.4.1.800.2.2.10.2.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atMacRuleVLANId 1.3.6.1.4.1.800.2.2.10.2.1.2
This object is the VLAN Id for this MAC-rule based vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atMacRuleIndex 1.3.6.1.4.1.800.2.2.10.2.1.3
The rule of which this MAC address list is part of. When creating a VLAN, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atMacRuleMacAddress 1.3.6.1.4.1.800.2.2.10.2.1.4
This object gives the value of the MAC address that is part of the MAC rule definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

atMacRuleMacAddressState 1.3.6.1.4.1.800.2.2.10.2.1.5
This object indicates whether this perticular rule is being used as part this VLANs definition. When set to disabled, this rule is not used as part of this vlans definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atProtoRuleTable 1.3.6.1.4.1.800.2.2.10.3
This table is used to configure an Auto-Tracker VLAN based on Protocol Rule. Note that any VLAN created using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtProtoRuleEntry

atProtoRuleEntry 1.3.6.1.4.1.800.2.2.10.3.1
An entry in the atProtoRuleTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtProtoRuleEntry  

atProtoRuleGroupId 1.3.6.1.4.1.800.2.2.10.3.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atProtoRuleVLANId 1.3.6.1.4.1.800.2.2.10.3.1.2
This object is the VLAN Id defined by this Protocol-rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atProtoRuleIndex 1.3.6.1.4.1.800.2.2.10.3.1.3
This object specifies the exact protocol rule for this VLAN. On creating a VLAN based on protocol rule, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atProtoRule 1.3.6.1.4.1.800.2.2.10.3.1.4
This object is an octet string of length 5 bytes. This object specifies the protocol type that defines this vlan. The values for the different protocols are: IP - first byte = 1, IPX - first byte = 2, AppleTalk - first byte = 3, DECNet - first byte = 4, Note that, in case of IP, ARP is included as IP and need not be specified explicitly. Similarly when AppleTalk is chosen both DDP and AARP are included. If any other protocol is used, it can be defined either by using Ether-type - first byte = 5 specifying its ether-type, second and third byte = ether-type value in hex. DSAP and SSAP - first byte = 6 specifying that its SAP type second byte = DSAP, third byte = SSAP in hex. SNAP Type - first byte = 7 specifying its SNAP second through sixth byte = snap value in hex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5)  

atProtoRuleStatus 1.3.6.1.4.1.800.2.2.10.3.1.5
This object indicates whether this perticular rule is being used as part this VLANs definition. When set to disabled, this rule is not used as part of this vlans definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atNetRuleTable 1.3.6.1.4.1.800.2.2.10.4
This table is used to configure an Auto-Tracker VLAN based on Net Addr Rule. Note that any VLAN created using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtNetRuleEntry

atNetRuleEntry 1.3.6.1.4.1.800.2.2.10.4.1
An entry in the atNetRuleTable. A VLAN can be defined using exaclty one address only except in the case of IPX where it could either be a Network number or the encapsulation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtNetRuleEntry  

atNetRuleGroupId 1.3.6.1.4.1.800.2.2.10.4.1.1
This object indicates the VLAN Group in which this VLAN is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atNetRuleVLANId 1.3.6.1.4.1.800.2.2.10.4.1.2
This object is the VLAN Id for this NetAddr-rule based vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atNetRuleIndex 1.3.6.1.4.1.800.2.2.10.4.1.3
This object specifies the exact Network Address rule for this VLAN. When creating a VLAN using the Network Address rule, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atNetRuleProtocolId 1.3.6.1.4.1.800.2.2.10.4.1.4
This object indicates which protocols Network Address is used to define this VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ip(1), ipx(2), dec(3)  

atNetRuleNetAddr 1.3.6.1.4.1.800.2.2.10.4.1.5
This object gives the network address that defines this vlan. If the protocol is IP, this object contains the four bytes of IP address followed by four bytes of IP Subnet Mask. If the protocol is IPX, this object contains the four bytes of Network Number followed by one byte of encapsulation type used on that network. The values for the encapsulation types are: byte 5 = 1 - IPX 802.3 encapsulation byte 5 = 2 - IPX Ethernet2 encapsulation byte 5 = 3 - IPX LLC encapsulation byte 5 = 4 - IPX SNAP encapsulation If the protocol is DECNet, this object contains the one byte of DEC area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

atNetRuleStatus 1.3.6.1.4.1.800.2.2.10.4.1.6
This object indicates whether this perticular rule is being used as part this VLANs definition. When set to disabled, this rule is not used as part of this vlans definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atUserRuleTable 1.3.6.1.4.1.800.2.2.10.5
This table is used to configure an Auto-Tracker VLAN based on a User Defined Rule.Note that any VLAN created using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtUserRuleEntry

atUserRuleEntry 1.3.6.1.4.1.800.2.2.10.5.1
An entry in the atUserRuleTable. A VLAN can be defined by more than one rule. In that case, the device will belong to that VLAN if it matches atleast one of the rules defined for that VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtUserRuleEntry  

atUserRuleGroupId 1.3.6.1.4.1.800.2.2.10.5.1.1
This object indicates the VLAN Group in which this VLAN is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atUserRuleVLANId 1.3.6.1.4.1.800.2.2.10.5.1.2
This object is the VLAN Id for this User-rule based vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atUserRuleIndex 1.3.6.1.4.1.800.2.2.10.5.1.3
This object indicates the exact User defined rule for this VLAN. When creating a VLAN using the user defined rules, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atUserRuleOffset 1.3.6.1.4.1.800.2.2.10.5.1.4
This object defines the offset into a frame where the pattern to match is located. This offset is relative to the start of the MAC header.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..64  

atUserRuleValue 1.3.6.1.4.1.800.2.2.10.5.1.5
This object defines the value of the pattern to match in a frame. The maximum length of this value can be 8 octets and the associated mask should have the same length as this object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

atUserRuleMask 1.3.6.1.4.1.800.2.2.10.5.1.6
This object defines the mask for the pattern to match. The Mask can be upto 8 bytes long but has to be of the same length as the Value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

atUserRuleStatus 1.3.6.1.4.1.800.2.2.10.5.1.7
This object indicates whether this perticular rule is being used as part this VLANs definition. When set to disabled, this rule is not used as part of this vlans definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atVLANRuleSumTable 1.3.6.1.4.1.800.2.2.10.6
This table provides the summary of vlan rule configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtVLANRuleSumEntry

atVLANRuleSumEntry 1.3.6.1.4.1.800.2.2.10.6.1
An entry in the vlan summary table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtVLANRuleSumEntry  

atVLANRuleSumGroupId 1.3.6.1.4.1.800.2.2.10.6.1.1
The group to which the VLAN belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

atVLANRuleSumVLANId 1.3.6.1.4.1.800.2.2.10.6.1.2
The VLAN Id for this rule is defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

atVLANRuleIndex 1.3.6.1.4.1.800.2.2.10.6.1.3
The exact rule identifier for this rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atVLANRuleSubIndex 1.3.6.1.4.1.800.2.2.10.6.1.4
In case a VLAN is defined using multiple instances of the same type of rule, this object identifies the exact instance of that type of rule. This object could then be used along with the group and vlanid to get the complete definition of this rule from the appropriate rule table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atVLANRuleType 1.3.6.1.4.1.800.2.2.10.6.1.5
The type of rule. This object can then be used to decide which table to lookup for the complete definition of the rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER port-rule(1), mac-rule(2), protocol-rule(3), network-rule(4), user-defined-rule(5), mcast-rule(6), binding-rule(7), dhcp-port-rule(8), dhcp-mac-rule(9)  

atVLANControlTable 1.3.6.1.4.1.800.2.2.10.7
This table gives the control information about all Auto-Tracker VLANs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtVLANControlEntry

atVLANControlEntry 1.3.6.1.4.1.800.2.2.10.7.1
An entry in the control table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtVLANControlEntry  

atVLANGroupId 1.3.6.1.4.1.800.2.2.10.7.1.1
This is the VLAN group to which the VLAN belongs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atVLANId 1.3.6.1.4.1.800.2.2.10.7.1.2
The VLAN id for this VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atVLANDesc 1.3.6.1.4.1.800.2.2.10.7.1.3
The description for this vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

atVLANAdminStatus 1.3.6.1.4.1.800.2.2.10.7.1.4
The Admin status of the VLAN. If set to disabled, any rules configured for this vlan will no longer be used and their status will be changed to disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atVLANOperStatus 1.3.6.1.4.1.800.2.2.10.7.1.5
The operation status of this vlan. If there any devices learnt by this system on this vlan, the operation status of the vlan is said to be active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

atDefaultVlan 1.3.6.1.4.1.800.2.2.10.8
When set to on, it allows devices to be assigned to the default vlan, else if it set to off, such devices are not assigned to any vlan, thereby preventing them from communicating to other devices.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

atmcportRuleTable 1.3.6.1.4.1.800.2.2.10.9
This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmcportRuleEntry

atmcportRuleEntry 1.3.6.1.4.1.800.2.2.10.9.1
An entry in the atportRuleTable. Each entry in this table identifies exactly one port that is part of the VLAN definition. Hence all the entries of this table with the same GroupId and VLANId collectively define one VLAN which is based on a Port Rule. A specific port can be included in definition of more than one vlan as long as those two vlans are part of the same VLAN group. That is to say, a port can belong to more than one vlan but can be part of atmost one VLAN group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmcportRuleEntry  

atmcportRuleGroupId 1.3.6.1.4.1.800.2.2.10.9.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atmcportRuleVLANId 1.3.6.1.4.1.800.2.2.10.9.1.2
This object is the VLAN defined by this port-rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atmcportRuleIdx 1.3.6.1.4.1.800.2.2.10.9.1.3
This object indicates the exact port-rule for this VLAN. There can be more than one port-rule defined for this VLAN. This object identifies the port rule of which the port is part of. When creating a VLAN using this table, this value should be set to 0 to indicate that this is a new port rule. If the port rule needs to be modified, then this object will be the port rule to modify.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atmcportRulePortId 1.3.6.1.4.1.800.2.2.10.9.1.4
This object defines the Virtual port that is part of this PORT rule. The first octet gives the slot number on which the port resides, the second being the physical interface, third octet being the service and the fourth being the instance of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

atmcportRulePortState 1.3.6.1.4.1.800.2.2.10.9.1.5
This object determines whether the port is being added or deleted from this port rule definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atmcMacRuleTable 1.3.6.1.4.1.800.2.2.10.10
This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmcMacRuleEntry

atmcMacRuleEntry 1.3.6.1.4.1.800.2.2.10.10.1
An entry in the atmcMacRuleTable. Each entry in this table identifies exactly one MAC address. All entries in this table with the same GroupId and VLANId collectively define a VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmcMacRuleEntry  

atmcMacRuleGroupId 1.3.6.1.4.1.800.2.2.10.10.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atmcMacRuleVLANId 1.3.6.1.4.1.800.2.2.10.10.1.2
This object is the VLAN Id for this MAC-rule based vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atmcMacRuleIndex 1.3.6.1.4.1.800.2.2.10.10.1.3
The rule of which this MAC address list is part of. When creating a VLAN, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atmcMacRuleMacAddress 1.3.6.1.4.1.800.2.2.10.10.1.4
This object gives the value of the MAC address that is part of the MAC rule definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

atmcMacRuleMacAddressState 1.3.6.1.4.1.800.2.2.10.10.1.5
This object determines if the MAC address is included in the VLAN definition. If the object is set to disabled, the MAC address is removed from the VLAN definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atMcastRuleTable 1.3.6.1.4.1.800.2.2.10.11
This table is used to configure MCAST Rules for a VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtMcastRuleEntry

atMcastRuleEntry 1.3.6.1.4.1.800.2.2.10.11.1
An entry in the MCAST Rule table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtMcastRuleEntry  

atMcastRuleGroupId 1.3.6.1.4.1.800.2.2.10.11.1.1
The group in which this rule is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

atMcastRuleVLANId 1.3.6.1.4.1.800.2.2.10.11.1.2
The VLAN for which this rule is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..32  

atMcastRuleIndex 1.3.6.1.4.1.800.2.2.10.11.1.3
The rule index ( a vlan can have multiple rules defined ) which exactly identifies this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atMcastRuleMacAddress 1.3.6.1.4.1.800.2.2.10.11.1.4
The Multicast MAC Address that makes up this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

atMcastRuleMacAddressState 1.3.6.1.4.1.800.2.2.10.11.1.5
The admin-state of this multicast mac address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

atmcVLANRuleSumTable 1.3.6.1.4.1.800.2.2.10.12
This table provides the summary of vlan rule configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmcVLANRuleSumEntry

atmcVLANRuleSumEntry 1.3.6.1.4.1.800.2.2.10.12.1
An entry in the vlan summary table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmcVLANRuleSumEntry  

atmcVLANRuleSumGroupId 1.3.6.1.4.1.800.2.2.10.12.1.1
The group to which the VLAN belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

atmcVLANRuleSumVLANId 1.3.6.1.4.1.800.2.2.10.12.1.2
The VLAN Id for this rule is defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

atmcVLANRuleIndex 1.3.6.1.4.1.800.2.2.10.12.1.3
The exact rule identifier for this rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmcVLANRuleSubIndex 1.3.6.1.4.1.800.2.2.10.12.1.4
In case a VLAN is defined using multiple instances of the same type of rule, this object identifies the exact instance of that type of rule. This object could then be used along with the group and vlanid to get the complete definition of this rule from the appropriate rule table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atmcVLANRuleType 1.3.6.1.4.1.800.2.2.10.12.1.5
The type of rule. This object can then be used to decide which table to lookup for the complete definition of the rule.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER port-rule(1), mac-rule(2), mcast-rule(3)  

atmcVLANControlTable 1.3.6.1.4.1.800.2.2.10.13
This table gives the control information about all Auto-Tracker VLANs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmcVLANControlEntry

atmcVLANControlEntry 1.3.6.1.4.1.800.2.2.10.13.1
An entry in the control table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmcVLANControlEntry  

atmcVLANGroupId 1.3.6.1.4.1.800.2.2.10.13.1.1
This is the VLAN group to which the VLAN belongs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atmcVLANId 1.3.6.1.4.1.800.2.2.10.13.1.2
The VLAN id for this VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atmcVLANDesc 1.3.6.1.4.1.800.2.2.10.13.1.3
The description for this vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmcVLANAdminStatus 1.3.6.1.4.1.800.2.2.10.13.1.4
The Admin status of the VLAN. If set to disabled, any rules configured for this vlan will no longer be used and their status will be changed to disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

atmcVLANOperStatus 1.3.6.1.4.1.800.2.2.10.13.1.5
The operation status of this vlan. If there any devices learnt by this system on this vlan, the operation status of the vlan is said to be active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

gmAutoServiceTable 1.3.6.1.4.1.800.2.2.10.14
Table of Auto-Activated Services
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GmAutoServiceEntry

gmAutoServiceEntry 1.3.6.1.4.1.800.2.2.10.14.1
an entry in the table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GmAutoServiceEntry  

gmAutoServiceGroupId 1.3.6.1.4.1.800.2.2.10.14.1.1
Group for which this service is configured
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServicePrimarySlot 1.3.6.1.4.1.800.2.2.10.14.1.2
Primary slot on which this service will be activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServicePrimaryPort 1.3.6.1.4.1.800.2.2.10.14.1.3
Primary port on which this service will be activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServiceIndex 1.3.6.1.4.1.800.2.2.10.14.1.4
Service index associated with this service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServiceType 1.3.6.1.4.1.800.2.2.10.14.1.5
Type of this service - currently only lane is supported and this object should have a value of 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eth-lane(1), token-ring-lane(2)  

gmAutoServiceName 1.3.6.1.4.1.800.2.2.10.14.1.6
The name of the service. In case of LANE, this is the elan name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

gmAutoServiceSecondarySlot 1.3.6.1.4.1.800.2.2.10.14.1.7
Secondary slot on which this service will be activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServiceSecondaryPort 1.3.6.1.4.1.800.2.2.10.14.1.8
Secondary port on which this service will be activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

gmAutoServiceAdminState 1.3.6.1.4.1.800.2.2.10.14.1.9
The admin state of this service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

gmAutoServiceOperState 1.3.6.1.4.1.800.2.2.10.14.1.10
Operational state of this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

gmAutoServiceActiveSlot 1.3.6.1.4.1.800.2.2.10.14.1.11
Slot on the which the service is currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gmAutoServiceActivePort 1.3.6.1.4.1.800.2.2.10.14.1.12
Physical Port on the which the service is currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gmAutoServiceNumber 1.3.6.1.4.1.800.2.2.10.14.1.13
Service number assigned by the switch when this service is activated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gmAutoServiceTranslations 1.3.6.1.4.1.800.2.2.10.14.1.14
This parameter controls whether frame translations will be exercised for this lane service once activated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atBindRuleTable 1.3.6.1.4.1.800.2.2.10.16
The Binding Rule table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtBindRuleEntry

atBindRuleEntry 1.3.6.1.4.1.800.2.2.10.16.1
An entry in the Binding Rule Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtBindRuleEntry  

atBindRuleGroupId 1.3.6.1.4.1.800.2.2.10.16.1.1
The group id of the vlan for which this rule is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atBindRuleVlanId 1.3.6.1.4.1.800.2.2.10.16.1.2
The vlan id for which this rule is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atBindRuleIndex 1.3.6.1.4.1.800.2.2.10.16.1.3
The index which uniquely identifies this rule for this vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atBindRulePortId 1.3.6.1.4.1.800.2.2.10.16.1.4
The port ( slot/intf/srvc/inst) for which this binding is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

atBindRuleIPAddress 1.3.6.1.4.1.800.2.2.10.16.1.5
The IP address for which this binding is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atBindRuleMacAddress 1.3.6.1.4.1.800.2.2.10.16.1.6
The mac address for which this binding is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

atBindRuleProtocol 1.3.6.1.4.1.800.2.2.10.16.1.7
The protocol for which this binding is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

atBindRuleBindParameter 1.3.6.1.4.1.800.2.2.10.16.1.8
The parameters to bind together.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER port-ip-mac(7), port-protocol(9), port-mac-protocol(13), ip-mac(6), ip-port(3), mac-port(5)  

atBindRuleStatus 1.3.6.1.4.1.800.2.2.10.16.1.9
The admin status for this rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

gmGroupListTable 1.3.6.1.4.1.800.2.2.10.17
This table lists the groups on a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GmGroupListEntry

gmGroupListEntry 1.3.6.1.4.1.800.2.2.10.17.1
An entry in the Group List table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GmGroupListEntry  

gmGroupListPortSlot 1.3.6.1.4.1.800.2.2.10.17.1.1
The slot id of the port for which the group list is requested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gmGroupListPortInterface 1.3.6.1.4.1.800.2.2.10.17.1.2
The physical port number for which the group list is requested.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

gmGroupListGroupId 1.3.6.1.4.1.800.2.2.10.17.1.3
One of the Groups to which the port belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atDHCPportRuleTable 1.3.6.1.4.1.800.2.2.10.18
This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtDHCPportRuleEntry

atDHCPportRuleEntry 1.3.6.1.4.1.800.2.2.10.18.1
An entry in the atDHCPportRuleTable. Each entry in this table identifies exactly one port that is part of the VLAN definition. Hence all the entries of this table with the same GroupId and VLANId collectively define one VLAN which is based on a Port Rule. A specific port can be included in definition of more than one vlan as long as those two vlans are part of the same VLAN group. That is to say, a port can belong to more than one vlan but can be part of atmost one VLAN group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtDHCPportRuleEntry  

atDHCPportRuleGroupId 1.3.6.1.4.1.800.2.2.10.18.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atDHCPportRuleVLANId 1.3.6.1.4.1.800.2.2.10.18.1.2
This object is the VLAN defined by this port-rule.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atDHCPportRuleIdx 1.3.6.1.4.1.800.2.2.10.18.1.3
This object indicates the exact port-rule for this VLAN. There can be more than one port-rule defined for this VLAN. This object identifies the port rule of which the port is part of. When creating a VLAN using this table, this value should be set to 0 to indicate that this is a new port rule. If the port rule needs to be modified, then this object will be the port rule to modify.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atDHCPportRulePortId 1.3.6.1.4.1.800.2.2.10.18.1.4
This object defines the Virtual port that is part of this PORT rule. The first octet gives the slot number on which the port resides, the second being the physical interface, third octet being the service and the fourth being the instance of the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

atDHCPportRulePortState 1.3.6.1.4.1.800.2.2.10.18.1.5
This object determines whether the port is being added or deleted from this port rule definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atDHCPMacRuleTable 1.3.6.1.4.1.800.2.2.10.19
This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not be enabled until the atVLANAdminStatus in the atVLANControlTable is not set to enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtDHCPMacRuleEntry

atDHCPMacRuleEntry 1.3.6.1.4.1.800.2.2.10.19.1
An entry in the atDHCPMacRuleTable. Each entry in this table identifies exactly one MAC address. All entries in this table with the same GroupId and VLANId collectively define a VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtDHCPMacRuleEntry  

atDHCPMacRuleGroupId 1.3.6.1.4.1.800.2.2.10.19.1.1
This object indicates the VLAN Group in which the VLAN defined by this rule is.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atDHCPMacRuleVLANId 1.3.6.1.4.1.800.2.2.10.19.1.2
This object is the VLAN Id for this MAC-rule based vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atDHCPMacRuleIndex 1.3.6.1.4.1.800.2.2.10.19.1.3
The rule of which this MAC address list is part of. When creating a VLAN, this object must be set to 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

atDHCPMacRuleMacAddress 1.3.6.1.4.1.800.2.2.10.19.1.4
This object gives the value of the MAC address that is part of the MAC rule definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

atDHCPMacRuleMacAddressState 1.3.6.1.4.1.800.2.2.10.19.1.5
This object determines if the MAC address is included in the VLAN definition. If the object is set to disabled, the MAC address is removed from the VLAN definition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

groupMobilityStatus 1.3.6.1.4.1.800.2.2.10.20
This object can used to configure the global status of group-mobility feature on the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gmMoveToDefGroup 1.3.6.1.4.1.800.2.2.10.21
When this object is set on, the switch will remove the port of out of a mobile group when the last device in that group learnt on that port ages out due to inactivity. When it is set to off, the port will remain in such a group, even if all macs leant on that port in that group age out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

gmDefGroup 1.3.6.1.4.1.800.2.2.10.22
When this object is set to on, the switch will assign the port's default group id to all such devices which are learned and do not match any policies for mobile groups. If it is set to off, such devices will get assigned to no groups and the traffic they send will be discarded by the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

atvIPRouterTable 1.3.6.1.4.1.800.2.2.11.1
A list of Virtual Router instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtVIPRouterEntry

atvIPRouterEntry 1.3.6.1.4.1.800.2.2.11.1.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtVIPRouterEntry  

atvIPRouterVLanGroup 1.3.6.1.4.1.800.2.2.11.1.1.1
VLAN Group ID for this atvIPRouterEntry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

atvIPRouterVLan 1.3.6.1.4.1.800.2.2.11.1.1.2
Auto Tracker VLAN Id for this router port instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atvIPRouterProtocol 1.3.6.1.4.1.800.2.2.11.1.1.3
The routing protocol(s) for this virtual router port. Each IP router port can carry one or more routing protocols. This will be represented by the logical ORing of each protocol number. Which are: ipOther(1), ipRip(2), ipEgp(4), ipGgp(8), ipHello(16), ipIs-is(32), ipEs-is(64), ipCiscoIgrp(128), ipBbnSpfIgp(256), ipOigp(512)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

atvIPRouterNetAddress 1.3.6.1.4.1.800.2.2.11.1.1.4
The IP network address for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atvIPRouterSubNetMask 1.3.6.1.4.1.800.2.2.11.1.1.5
The IP network subnet mask for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atvIPRouterBcastAddress 1.3.6.1.4.1.800.2.2.11.1.1.6
The IP broadcast address for this virtual bridge instance for the purpose of allowing access from the external network management system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atvIPRouterDescription 1.3.6.1.4.1.800.2.2.11.1.1.7
Textual description of the router instance.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

atvIPRouterAdmStatus 1.3.6.1.4.1.800.2.2.11.1.1.8
The particular routing environment can be enable(2) or disable(1) (or delete (3)) upon user's request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanAdminStatCodes  

atvIPRouterOperStatus 1.3.6.1.4.1.800.2.2.11.1.1.9
Provide operating status of a particular router envirnment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanVlanOperStatCodes  

atvIPRouterFramingType 1.3.6.1.4.1.800.2.2.11.1.1.10
Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet 2. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-2(1), ethernet-802-3(2), fddi(3), token-ring(4), token-ring-source-routed(5)  

atvIPRouterRipConfigMode 1.3.6.1.4.1.800.2.2.11.1.1.11
RIP's operational mode. 'silent' means that RIP listens for routing updates but does not send them. 'deaf' means that RIP sends routing updates but not listen to them. 'active' means that RIP both sends and receives routing updates, and 'inactive' means that RIP is not operational on the given virtual LAN. The default is 'simple'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER silent(1), deaf(2), active(3), inactive(4)  

atvIPRouterRelayServicesFwd 1.3.6.1.4.1.800.2.2.11.1.1.12
Each of the 8 least significant bits are assigned to a UDP Relay service as follows: 01H - bootp (Not currently allowed) 02H - NBNS 04H - NBDD 08H - Gen1 10H - Gen2 20H - Gen3 40H - Gen4 80H - Gen5 A set bit indicates that packets are being forwarded to this vlan for the service corresponding to the bit. Use bit 15 to indicate that a UDP Relay Service should be unset and packets should not be forwarded to this vlan. 8001H - bootp (Not currently allowed) 8002H - NBNS 8004H - NBDD 8008H - Gen1 8010H - Gen2 8020H - Gen3 8040H - Gen4 8080H - Gen5
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

atvIPXRouterTable 1.3.6.1.4.1.800.2.2.12.1
A list of Virtual Router instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtVIPXRouterEntry

atvIPXRouterEntry 1.3.6.1.4.1.800.2.2.12.1.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtVIPXRouterEntry  

atvIPXRouterVLanGroup 1.3.6.1.4.1.800.2.2.12.1.1.1
VLAN Group ID for this vIPXRouterEntry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

atvIPXRouterVLan 1.3.6.1.4.1.800.2.2.12.1.1.2
VLAN ID for this vIPXRouterEntry instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

atvIPXRouterProtocol 1.3.6.1.4.1.800.2.2.12.1.1.3
The routing protocol(s) for this virtual router port. Each IPX router port can carry one or more routing protocols. This will be represented by the logical ORing of each protocol number. Which are: ipxOther(1), ipxRip(2), ipxSap(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atvIPXRouterNetAddress 1.3.6.1.4.1.800.2.2.12.1.1.4
The IPX network address for this virtual bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NetNumber  

atvIPXRouterFramingType 1.3.6.1.4.1.800.2.2.12.1.1.5
Provides the ability to set the outbound frame type for IPX traffic. The default frame type is 802.2 Novell Raw. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-2(1), ethernet-802-3-llc(2), ethernet-802-3-snap(3), ethernet-802-3-raw(4), fddi-snap(5), fddi-snap-sr(6), fddi-llc(7), fddi-llc-sr(8), token-ring-snap(9), token-ring-snap-sr(10), token-ring-llc(11), token-ring-llc-sr(12)  

atvIPXRouterDescription 1.3.6.1.4.1.800.2.2.12.1.1.6
Textual description of the router instance.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

atvIPXRouterAdmStatus 1.3.6.1.4.1.800.2.2.12.1.1.7
The particular routing environment can be enabled(2) or disabled(1) upon user's request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  XylanVlanAdminStatCodes  

atvIPXRouterOperStatus 1.3.6.1.4.1.800.2.2.12.1.1.8
Provide operating status of a particular router envirnment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  XylanVlanOperStatCodes  

atvIPXSrcRteType 1.3.6.1.4.1.800.2.2.12.1.1.9
Provide the ability to set the type of source routing broadcasts between AllRoutesExplorer(0) and SpanningTreeExplorer(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER are(1), ste(2), not-applicable(3)  

v80210ServicesTable 1.3.6.1.4.1.800.2.2.13.1
A list of commands to add or remove Virtual LANs from a 80210 service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    V80210ServicesEntry

v80210ServicesEntry 1.3.6.1.4.1.800.2.2.13.1.1
A 80210 services entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  V80210ServicesEntry  

v80210ServicesSlot 1.3.6.1.4.1.800.2.2.13.1.1.1
The slot number (1-based) of the physical port providing the 80210 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

v80210ServicesStation 1.3.6.1.4.1.800.2.2.13.1.1.2
The station number (1-based) within the physical port providing the 80210 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

v80210ServicesDescription 1.3.6.1.4.1.800.2.2.13.1.1.3
A description of the 80210 service being provided.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

v80210ServicesBridgeID 1.3.6.1.4.1.800.2.2.13.1.1.4
The VLAN ID of the Virtual Bridge port for the given 80210 service. A value of 0 means that the Virtual Bridge port does not exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

v80210VlanTable 1.3.6.1.4.1.800.2.2.13.2
A list of commands to add or remove Virtual LANs from a 80210 service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    V80210VlanEntry

v80210VlanEntry 1.3.6.1.4.1.800.2.2.13.2.1
A 80210trunking Virtual LAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  V80210VlanEntry  

v80210Slot 1.3.6.1.4.1.800.2.2.13.2.1.1
The slot number (1-based) of the physical port providing the 80210 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

v80210Station 1.3.6.1.4.1.800.2.2.13.2.1.2
The station number (1-based) within the physical port providing the 80210 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

v80210LanNumber 1.3.6.1.4.1.800.2.2.13.2.1.3
The VLAN ID to be added to or removed from the given 80210 service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

v80210Command 1.3.6.1.4.1.800.2.2.13.2.1.4
The command to either add or remove the specified VLAN ID from the given 80210 service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), remove(2)  

vDBrServicesTable 1.3.6.1.4.1.800.2.2.14.1
A list of commands to add or remove Virtual LANs from an DBr service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VDBrServicesEntry

vDBrServicesEntry 1.3.6.1.4.1.800.2.2.14.1.1
An DBr services entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VDBrServicesEntry  

vDBrServicesSlot 1.3.6.1.4.1.800.2.2.14.1.1.1
The slot number (1-based) of the physical port providing the DBr service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDBrServicesStation 1.3.6.1.4.1.800.2.2.14.1.1.2
The station number (1-based) within the physical port providing the DBr service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDBrServicesDescription 1.3.6.1.4.1.800.2.2.14.1.1.3
A description of the DBr service being provided.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

vDBrServicesBridgeID 1.3.6.1.4.1.800.2.2.14.1.1.4
The VLAN ID of the Virtual Bridge port for the given DBr service. A value of 0 means that the Virtual Bridge port does not exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vDBrVlanTable 1.3.6.1.4.1.800.2.2.14.2
A list of commands to add or remove Virtual LANs from the DBr service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VDBrVlanEntry

vDBrVlanEntry 1.3.6.1.4.1.800.2.2.14.2.1
An DBr trunking Virtual LAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VDBrVlanEntry  

vDBrSlot 1.3.6.1.4.1.800.2.2.14.2.1.1
The slot number (1-based) of the physical port providing the DBr service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDBrStation 1.3.6.1.4.1.800.2.2.14.2.1.2
The station number (1-based) within the physical port providing the DBr service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDBrLanNumber 1.3.6.1.4.1.800.2.2.14.2.1.3
The VLAN ID to be added to or removed from the given DBr service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vDBrCommand 1.3.6.1.4.1.800.2.2.14.2.1.4
The command to either add or remove the specified VLAN ID from the given DBr service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), remove(2)  

vDupMacMac 1.3.6.1.4.1.800.2.2.16.1
The router port's MAC address for which the last duplicate MAC address was detected .
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

vDupMacSlot 1.3.6.1.4.1.800.2.2.16.2
The slot number (1-based) where duplicate MAC address was last received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDupMacIntf 1.3.6.1.4.1.800.2.2.16.3
The interface number (1-based) where duplicate MAC address was last received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vDupMacTime 1.3.6.1.4.1.800.2.2.16.4
The time in seconds that the duplicate MAC address was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

qGroupTable 1.3.6.1.4.1.800.2.2.15.1
This table lists the 802.1q groups on a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QGroupEntry

qGroupEntry 1.3.6.1.4.1.800.2.2.15.1.1
An entry in 802.1q group table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  QGroupEntry  

qGroupSlot 1.3.6.1.4.1.800.2.2.15.1.1.1
The slot id of the required port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qGroupPort 1.3.6.1.4.1.800.2.2.15.1.1.2
The physical port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qGroupGroupId 1.3.6.1.4.1.800.2.2.15.1.1.3
Group Id on the particular port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qGroupMode 1.3.6.1.4.1.800.2.2.15.1.1.4
gstsxylan(1) indicates spanning tree support on a gigabit port by proprietary mode and gstsieee(2) indicates spanning tree on a gigabit port by IEEE mode, msts(3) indicates multiple spanning tree support on a 10/100 Mammoth Ethernet port, and ssts(4) indicates single spanning tree support on a 10/100 Mammoth Ethernet port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER gstsxylan(1), gstsieee(2), msts(3), ssts(4)  

qGroupDescription 1.3.6.1.4.1.800.2.2.15.1.1.5
Textual description of multiple spanning tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

qGroupTag 1.3.6.1.4.1.800.2.2.15.1.1.6
Tag used for support multiple spanning tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qGroupPriority 1.3.6.1.4.1.800.2.2.15.1.1.7
Priority used for support multiple spanning tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

qGroupAdminStatus 1.3.6.1.4.1.800.2.2.15.1.1.8
Value of 0 indicates the service should be deleted, value of 1 indicates the service should be created.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(0), create(1)  

qGroupTxPkts 1.3.6.1.4.1.800.2.2.15.1.1.9
Gives the number of transmitteded packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

qGroupRxPkts 1.3.6.1.4.1.800.2.2.15.1.1.10
Gives the number of received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

qGroupTxOctets 1.3.6.1.4.1.800.2.2.15.1.1.11
Gives the number of transmitted bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

qGroupRxOctets 1.3.6.1.4.1.800.2.2.15.1.1.12
Gives the number of received bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPmapIngressTable 1.3.6.1.4.1.800.2.2.17.1
A list of Port Mapping Ingress port table instance on this physical OmniSwitch or OSR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmapIngressEntry

vPmapIngressEntry 1.3.6.1.4.1.800.2.2.17.1.1
A Port Mapping Ingress Port entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmapIngressEntry  

pMapIngressId 1.3.6.1.4.1.800.2.2.17.1.1.1
A unique number that identifies this Port Mapping on the OmniSwitch or OSR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

pMapIngressSlot 1.3.6.1.4.1.800.2.2.17.1.1.2
A physical slot number on which the Port Mapping Ingress Port is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..11  

pMapIngressPort 1.3.6.1.4.1.800.2.2.17.1.1.3
A physical port number that is associated with the Port Mapping Ingress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

pMapIngressSrvc 1.3.6.1.4.1.800.2.2.17.1.1.4
A service type that is associated with this Port Mapping Ingress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pMapIngressInst 1.3.6.1.4.1.800.2.2.17.1.1.5
A Instance that is associated with this Port Mapping Ingress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pMapIngressAdminStatus 1.3.6.1.4.1.800.2.2.17.1.1.6
This object indicates whether to add(1) to or delete(2) from the Port Mapping Ingress List.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2)  

vPmapEgressTable 1.3.6.1.4.1.800.2.2.17.2
A list of Port Mapping Egress port table instance on this physical OmniSwitch or OSR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmapEgressEntry

vPmapEgressEntry 1.3.6.1.4.1.800.2.2.17.2.1
A Port Mapping Egress Port entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmapEgressEntry  

pMapEgressId 1.3.6.1.4.1.800.2.2.17.2.1.1
A unique number that identifies this Port Mapping on the physical OmniSwitch or OSR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..254  

pMapEgressSlot 1.3.6.1.4.1.800.2.2.17.2.1.2
A physical slot number on whitch the Port Mapping Egress Port is configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..11  

pMapEgressPort 1.3.6.1.4.1.800.2.2.17.2.1.3
A physical port number that is associated with the Port Mapping Egress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

pMapEgressSrvc 1.3.6.1.4.1.800.2.2.17.2.1.4
A service type that is associated with this Port Mapping Egress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pMapEgressInst 1.3.6.1.4.1.800.2.2.17.2.1.5
A Instance that is associated with this Port Mapping Egress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

pMapEgressAdminStatus 1.3.6.1.4.1.800.2.2.17.2.1.6
This object indicates whether to add(1) to or delete(2) from the Port Mapping Egress Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2)  

vPmapConfigTable 1.3.6.1.4.1.800.2.2.17.3
A list of Port Mapping config table instance on this physical OmniSwitch or OSR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmapConfigEntry

vPmapConfigEntry 1.3.6.1.4.1.800.2.2.17.3.1
A Port Mapping configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PmapConfigEntry  

pMapConfigId 1.3.6.1.4.1.800.2.2.17.3.1.1
A unique number that identifies this Port Mapping with the physical OmniSwitch or OSR.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

pMapConfigStatus 1.3.6.1.4.1.800.2.2.17.3.1.2
This object indicates whether to set (1) or delete (2) the port mapping configeration..
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER set(1), delete(2)  

vPmapNextId 1.3.6.1.4.1.800.2.2.17.4
The unique number that identifiers the next Port Mapping Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..128