XYLAN-M013-MIB

File: XYLAN-M013-MIB.mib (84908 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
XYLAN-BASE-MIB

Imported symbols

Counter IpAddress OBJECT-TYPE
DisplayString xylanM013Arch

Defined Types

M013ProvisioningEntry  
SEQUENCE    
  m013SlotIndex INTEGER
  m013LogicalPortIndex INTEGER
  m013Description DisplayString
  m013Ds3PortIndex INTEGER
  m013Ds1Fraction INTEGER
  m013Ds0Mask INTEGER
  m013IfIndex INTEGER
  m013Protocol INTEGER
  m013EntryStatus INTEGER

M013ServiceEntry  
SEQUENCE    
  m013ServiceSlotIndex INTEGER
  m013ServiceLogicalPortIndex INTEGER
  m013ServiceNumber INTEGER
  m013ServiceTableEntryType INTEGER
  m013ServiceDescription DisplayString
  m013ServiceType INTEGER
  m013ServiceOperStatus INTEGER
  m013ServiceAdminStatus INTEGER
  m013ServiceVirtualCircuit INTEGER
  m013ServiceVlans OCTET STRING
  m013ServiceBridgingMode INTEGER

M013FrxPortEntry  
SEQUENCE    
  m013FrxPortSlotIndex INTEGER
  m013FrxPortPortIndex INTEGER
  m013FrxPortDescription DisplayString
  m013FrxPortAdminStatus INTEGER
  m013FrxPortDefaultIpRoutingAdminStatus INTEGER
  m013FrxPortDefaultBridgingAdminStatus INTEGER
  m013FrxPortDefaultBridgingVLAN INTEGER
  m013FrxPortDefaultBridgingMode INTEGER
  m013FrxPortDynamicVCCreation INTEGER

M013FrxVcControlEntry  
SEQUENCE    
  m013FrxVcControlSlotIndex INTEGER
  m013FrxVcControlPortIndex INTEGER
  m013FrxVcControlDlci INTEGER
  m013FrxVcControlIpRoutingAdminStatus INTEGER

M013FrxVcStatsEntry  
SEQUENCE    
  m013FrxVcStatsSlotIndex INTEGER
  m013FrxVcStatsPortIndex INTEGER
  m013FrxVcStatsDlci INTEGER
  m013FrxVcStatsTxIPOctets Counter
  m013FrxVcStatsTxIPFrames Counter
  m013FrxVcStatsRxIPOctets Counter
  m013FrxVcStatsRxIPFrames Counter
  m013FrxVcStatsTxIPXOctets Counter
  m013FrxVcStatsTxIPXFrames Counter
  m013FrxVcStatsRxIPXOctets Counter
  m013FrxVcStatsRxIPXFrames Counter
  m013FrxVcStatsTxBPDUOctets Counter
  m013FrxVcStatsTxBPDUFrames Counter
  m013FrxVcStatsRxBPDUOctets Counter
  m013FrxVcStatsRxBPDUFrames Counter
  m013FrxVcStatsTxEthernetOctets Counter
  m013FrxVcStatsTxEthernetFrames Counter
  m013FrxVcStatsRxEthernetOctets Counter
  m013FrxVcStatsRxEthernetFrames Counter
  m013FrxVcStatsTx8025Octets Counter
  m013FrxVcStatsTx8025Frames Counter
  m013FrxVcStatsRx8025Octets Counter
  m013FrxVcStatsRx8025Frames Counter
  m013FrxVcStatsTxFDDIOctets Counter
  m013FrxVcStatsTxFDDIFrames Counter
  m013FrxVcStatsRxFDDIOctets Counter
  m013FrxVcStatsRxFDDIFrames Counter

M013PppxConfigEntry  
SEQUENCE    
  m013PppxConfigSlotIndex INTEGER
  m013PppxConfigPortIndex INTEGER
  m013PppxConfigDescription DisplayString
  m013PppxConfigAdminStatus INTEGER
  m013PppxConfigMode INTEGER
  m013PppxConfigIpConfigAdminStatus INTEGER
  m013PppxConfigBcpConfigAdminStatus INTEGER
  m013PppxConfigIpxConfigAdminStatus INTEGER
  m013PppxConfigRemoteIpAddress IpAddress
  m013PppxConfigAuthenticationType INTEGER
  m013PppxConfigUserIdToRemote DisplayString
  m013PppxConfigPasswordToRemote DisplayString
  m013PppxConfigUserIdFromRemote DisplayString
  m013PppxConfigPasswordFromRemote DisplayString
  m013PppxConfigMaxFailureCount INTEGER
  m013PppxConfigMaxConfigureCount INTEGER
  m013PppxConfigMaxTerminateCount INTEGER
  m013PppxConfigRetryTimeout INTEGER

M013PppxCpEntry  
SEQUENCE    
  m013PppxCpSlotIndex INTEGER
  m013PppxCpPortIndex INTEGER
  m013PppxCpIpOperStatus INTEGER
  m013PppxCpIpxOperStatus INTEGER
  m013PppxCpBcpOperStatus INTEGER
  m013PppxCpTxLcpPackets Counter
  m013PppxCpRxLcpPackets Counter
  m013PppxCpTxIpcpPackets Counter
  m013PppxCpRxIpcpPackets Counter
  m013PppxCpTxIpxcpPackets Counter
  m013PppxCpRxIpxcpPackets Counter
  m013PppxCpTxBcpPackets Counter
  m013PppxCpRxBcpPackets Counter

M013PppxStatsEntry  
SEQUENCE    
  m013PppxStatsSlotIndex INTEGER
  m013PppxStatsPortIndex INTEGER
  m013PppxStatsTxIPOctets Counter
  m013PppxStatsTxIPPackets Counter
  m013PppxStatsRxIPOctets Counter
  m013PppxStatsRxIPPackets Counter
  m013PppxStatsTxIPXOctets Counter
  m013PppxStatsTxIPXPackets Counter
  m013PppxStatsRxIPXOctets Counter
  m013PppxStatsRxIPXPackets Counter
  m013PppxStatsTxBPDUOctets Counter
  m013PppxStatsTxBPDUPackets Counter
  m013PppxStatsRxBPDUOctets Counter
  m013PppxStatsRxBPDUPackets Counter
  m013PppxStatsTxEthernetOctets Counter
  m013PppxStatsTxEthernetPackets Counter
  m013PppxStatsRxEthernetOctets Counter
  m013PppxStatsRxEthernetPackets Counter
  m013PppxStatsTx8025Octets Counter
  m013PppxStatsTx8025Packets Counter
  m013PppxStatsRx8025Octets Counter
  m013PppxStatsRx8025Packets Counter
  m013PppxStatsTxFDDIOctets Counter
  m013PppxStatsTxFDDIPackets Counter
  m013PppxStatsRxFDDIOctets Counter
  m013PppxStatsRxFDDIPackets Counter

M013IPRouterIfEntry  
SEQUENCE    
  m013IPRouterIfSlotIndex INTEGER
  m013IPRouterIfLogicalPortIndex INTEGER
  m013IPRouterIfAddress IpAddress
  m013IPRouterIfSubNetMask IpAddress
  m013IPRouterIfBcastAddress IpAddress
  m013IPRouterIfDescription DisplayString
  m013IPRouterIfAdmStatus INTEGER
  m013IPRouterIfOperStatus INTEGER
  m013IPRouterIfFramingType INTEGER
  m013IPRouterIfMtu INTEGER
  m013IPRouterIfProtocol OCTET STRING

M013Dsx3ConfigEntry  
SEQUENCE    
  m013Dsx3LineIndex INTEGER
  m013Dsx3ChannelizedMode INTEGER
  m013Dsx3MdlEIC OCTET STRING
  m013Dsx3MdlLIC OCTET STRING
  m013Dsx3MdlFIC OCTET STRING
  m013Dsx3MdlUNIT OCTET STRING
  m013Dsx3MdlPFI OCTET STRING
  m013Dsx3MdlPortIdleSignalCode OCTET STRING
  m013Dsx3MdlGenerator OCTET STRING
  m013Dsx3MdlTransmitPath INTEGER
  m013Dsx3MdlTransmitIdleSignal INTEGER
  m013Dsx3MdlTransmitTestSignal INTEGER
  m013Dsx3FEACEnable INTEGER
  m013Dsx3REIEnable INTEGER
  m013Dsx3RxMdlEnable INTEGER
  m013Dsx3RxMdlEIC OCTET STRING
  m013Dsx3RxMdlLIC OCTET STRING
  m013Dsx3RxMdlFIC OCTET STRING
  m013Dsx3RxMdlUNIT OCTET STRING
  m013Dsx3RxMdlPFI OCTET STRING
  m013Dsx3RxMdlPortIdleSignalCode OCTET STRING
  m013Dsx3RxMdlGenerator OCTET STRING
  m013Dsx3RemoteStatus INTEGER
  m013Dsx3RemoteStatusLastChange INTEGER
  m013Dsx3LedStatus INTEGER
  m013Dsx3Ds1StatsEnableMask INTEGER

M013Dsx3StatsEntry  
SEQUENCE    
  m013Dsx3StatsLineIndex INTEGER
  m013Dsx3StatsRxREI Counter
  m013Dsx3StatsRxFEAC INTEGER

M013Dsx1ConfigEntry  
SEQUENCE    
  m013Dsx1LineIndex INTEGER
  m013Dsx1T1BertPattern INTEGER
  m013Dsx1T1BertInterval INTEGER
  m013Dsx1T1BertFraming INTEGER
  m013Dsx1T1BertTestEnable INTEGER
  m013Dsx1RemoteStatus INTEGER
  m013Dsx1RemoteStatusLastChange INTEGER

Defined Values

m013ProvisioningGroup 1.3.6.1.4.1.800.2.25.1
OBJECT IDENTIFIER    

m013ServiceGroup 1.3.6.1.4.1.800.2.25.2
OBJECT IDENTIFIER    

m013FrxPortGroup 1.3.6.1.4.1.800.2.25.3
OBJECT IDENTIFIER    

m013FrxVcControlGroup 1.3.6.1.4.1.800.2.25.4
OBJECT IDENTIFIER    

m013FrxVcStatsGroup 1.3.6.1.4.1.800.2.25.5
OBJECT IDENTIFIER    

m013PppxConfigGroup 1.3.6.1.4.1.800.2.25.6
OBJECT IDENTIFIER    

m013PppxCpGroup 1.3.6.1.4.1.800.2.25.7
OBJECT IDENTIFIER    

m013PppxStatsGroup 1.3.6.1.4.1.800.2.25.8
OBJECT IDENTIFIER    

m013IPRouterGroup 1.3.6.1.4.1.800.2.25.9
OBJECT IDENTIFIER    

m013Dsx3Group 1.3.6.1.4.1.800.2.25.10
OBJECT IDENTIFIER    

m013Dsx1Group 1.3.6.1.4.1.800.2.25.11
OBJECT IDENTIFIER    

m013ProvisioningTable 1.3.6.1.4.1.800.2.25.1.1
A table of provisioning configuration data used to configure an HDLC interface on a DS3 connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013ProvisioningEntry

m013ProvisioningEntry 1.3.6.1.4.1.800.2.25.1.1.1
An entry in the table, containing information about provisioning an HDLC channel on a DS3 connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013ProvisioningEntry  

m013SlotIndex 1.3.6.1.4.1.800.2.25.1.1.1.1
Slot for channel being provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013LogicalPortIndex 1.3.6.1.4.1.800.2.25.1.1.1.2
A per-slot unique HDLC channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013Description 1.3.6.1.4.1.800.2.25.1.1.1.3
A user description of this channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013Ds3PortIndex 1.3.6.1.4.1.800.2.25.1.1.1.4
Physical DS3 port for channel being provisioned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

m013Ds1Fraction 1.3.6.1.4.1.800.2.25.1.1.1.5
The DS1 channel within the DS3 circuit that is used to create this HDLC channel. An entry of 0 indicates this is a clear channel (full DS3 bandwidth) connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..28  

m013Ds0Mask 1.3.6.1.4.1.800.2.25.1.1.1.6
This is a bit mask of the DS0 channels within the selected DS1 fraction that make up the desired HDLC channel. If m013Ds1Fraction is 0 this value has no meaning
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..ffffff  

m013IfIndex 1.3.6.1.4.1.800.2.25.1.1.1.7
A per-switch unique number for this HDLC channel. This number is a combination of Slot and Logical Port numbers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 10001..18192  

m013Protocol 1.3.6.1.4.1.800.2.25.1.1.1.8
The L2 protocol that is used on this HDLC channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fr(1), ppp(2)  

m013EntryStatus 1.3.6.1.4.1.800.2.25.1.1.1.9
Value used for the control of the creation of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

m013ServiceTable 1.3.6.1.4.1.800.2.25.2.1
A table of M013 services status and parameter information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013ServiceEntry

m013ServiceEntry 1.3.6.1.4.1.800.2.25.2.1.1
An entry in the table, containing information about the M013 services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013ServiceEntry  

m013ServiceSlotIndex 1.3.6.1.4.1.800.2.25.2.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

m013ServiceLogicalPortIndex 1.3.6.1.4.1.800.2.25.2.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

m013ServiceNumber 1.3.6.1.4.1.800.2.25.2.1.1.3
The unique service number for this particular slot/logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

m013ServiceTableEntryType 1.3.6.1.4.1.800.2.25.2.1.1.4
The type of table entry for this M013 Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically created for an unconfigured virtual circuit based on the the type of service (bridging or trunking) and whether a default VLAN is defined for the type of service. Changing the value via a write command from dynamic to static will cause the table entry to be stored into non-volatile memory. Setting a value of dynamic is not allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

m013ServiceDescription 1.3.6.1.4.1.800.2.25.2.1.1.5
A description for this M013 service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013ServiceType 1.3.6.1.4.1.800.2.25.2.1.1.6
The service type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER trunking(4), bridging(6)  

m013ServiceOperStatus 1.3.6.1.4.1.800.2.25.2.1.1.7
The service operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013ServiceAdminStatus 1.3.6.1.4.1.800.2.25.2.1.1.8
The service adminstration status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

m013ServiceVirtualCircuit 1.3.6.1.4.1.800.2.25.2.1.1.9
The virtual circuit for this service. In case of PPP it should be set to zero, in case of Frame Relay - to the appropriate DLCI value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1024  

m013ServiceVlans 1.3.6.1.4.1.800.2.25.2.1.1.10
The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

m013ServiceBridgingMode 1.3.6.1.4.1.800.2.25.2.1.1.11
The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

m013FrxPortTable 1.3.6.1.4.1.800.2.25.3.1
A table of port layer status and parameter information for the UNI's logical interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013FrxPortEntry

m013FrxPortEntry 1.3.6.1.4.1.800.2.25.3.1.1
An entry in the table, containing information about the logical layer of a UNI interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013FrxPortEntry  

m013FrxPortSlotIndex 1.3.6.1.4.1.800.2.25.3.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013FrxPortPortIndex 1.3.6.1.4.1.800.2.25.3.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013FrxPortDescription 1.3.6.1.4.1.800.2.25.3.1.1.3
A description for this Frame Relay port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013FrxPortAdminStatus 1.3.6.1.4.1.800.2.25.3.1.1.4
If set to enabled, enables Frame Relay Interface. If set to disabled, disables Frame Relay Interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013FrxPortDefaultIpRoutingAdminStatus 1.3.6.1.4.1.800.2.25.3.1.1.5
If set to enabled, enables Default IP Routing. If set to disabled, disables Default IP Routing
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013FrxPortDefaultBridgingAdminStatus 1.3.6.1.4.1.800.2.25.3.1.1.6
If set to enabled, enables Default Bridging. If set to disabled, disables Default Bridging.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013FrxPortDefaultBridgingVLAN 1.3.6.1.4.1.800.2.25.3.1.1.7
The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bridging service and will discard all bridged format frames received or transmitted. A non-zero value indicates the bridging VLAN to be used if the network informs the port of a new VC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

m013FrxPortDefaultBridgingMode 1.3.6.1.4.1.800.2.25.3.1.1.8
The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

m013FrxPortDynamicVCCreation 1.3.6.1.4.1.800.2.25.3.1.1.9
If set to enabled, enables Dynamic VC creation. If set to disabled, disables Dynamic VC creation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013FrxVcControlTable 1.3.6.1.4.1.800.2.25.4.1
A table of Frame Relay virtual circuit configuration and control information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013FrxVcControlEntry

m013FrxVcControlEntry 1.3.6.1.4.1.800.2.25.4.1.1
An entry in the table, containing information about the Frame Relay virtual circuit statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013FrxVcControlEntry  

m013FrxVcControlSlotIndex 1.3.6.1.4.1.800.2.25.4.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013FrxVcControlPortIndex 1.3.6.1.4.1.800.2.25.4.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013FrxVcControlDlci 1.3.6.1.4.1.800.2.25.4.1.1.3
A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013FrxVcControlIpRoutingAdminStatus 1.3.6.1.4.1.800.2.25.4.1.1.4
If set to enabled, enables IP Routing. If set to disabled, disables IP Routing
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013FrxVcStatsTable 1.3.6.1.4.1.800.2.25.5.1
A table of Frame Relay virtual circuit statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013FrxVcStatsEntry

m013FrxVcStatsEntry 1.3.6.1.4.1.800.2.25.5.1.1
An entry in the table, containing information about the Frame Relay virtual circuit statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013FrxVcStatsEntry  

m013FrxVcStatsSlotIndex 1.3.6.1.4.1.800.2.25.5.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013FrxVcStatsPortIndex 1.3.6.1.4.1.800.2.25.5.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013FrxVcStatsDlci 1.3.6.1.4.1.800.2.25.5.1.1.3
A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1022  

m013FrxVcStatsTxIPOctets 1.3.6.1.4.1.800.2.25.5.1.1.4
The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxIPFrames 1.3.6.1.4.1.800.2.25.5.1.1.5
The total number of transmitted routed IP format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxIPOctets 1.3.6.1.4.1.800.2.25.5.1.1.6
The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxIPFrames 1.3.6.1.4.1.800.2.25.5.1.1.7
The total number of received routed IP format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxIPXOctets 1.3.6.1.4.1.800.2.25.5.1.1.8
The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxIPXFrames 1.3.6.1.4.1.800.2.25.5.1.1.9
The total number of transmitted routed IPX format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxIPXOctets 1.3.6.1.4.1.800.2.25.5.1.1.10
The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxIPXFrames 1.3.6.1.4.1.800.2.25.5.1.1.11
The total number of received routed IPX format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxBPDUOctets 1.3.6.1.4.1.800.2.25.5.1.1.12
The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxBPDUFrames 1.3.6.1.4.1.800.2.25.5.1.1.13
The total number of transmitted BPDU frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxBPDUOctets 1.3.6.1.4.1.800.2.25.5.1.1.14
The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxBPDUFrames 1.3.6.1.4.1.800.2.25.5.1.1.15
The total number of received BPDU frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxEthernetOctets 1.3.6.1.4.1.800.2.25.5.1.1.16
The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxEthernetFrames 1.3.6.1.4.1.800.2.25.5.1.1.17
The total number of transmitted bridged 802.3 format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxEthernetOctets 1.3.6.1.4.1.800.2.25.5.1.1.18
The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxEthernetFrames 1.3.6.1.4.1.800.2.25.5.1.1.19
The total number of received bridged 802.3 format frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTx8025Octets 1.3.6.1.4.1.800.2.25.5.1.1.20
The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTx8025Frames 1.3.6.1.4.1.800.2.25.5.1.1.21
The total number of transmitted 8025 frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRx8025Octets 1.3.6.1.4.1.800.2.25.5.1.1.22
The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRx8025Frames 1.3.6.1.4.1.800.2.25.5.1.1.23
The total number of received 8025 frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxFDDIOctets 1.3.6.1.4.1.800.2.25.5.1.1.24
The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsTxFDDIFrames 1.3.6.1.4.1.800.2.25.5.1.1.25
The total number of transmitted FDDI frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxFDDIOctets 1.3.6.1.4.1.800.2.25.5.1.1.26
The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013FrxVcStatsRxFDDIFrames 1.3.6.1.4.1.800.2.25.5.1.1.27
The total number of received FDDI frames on this virtual circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxConfigTable 1.3.6.1.4.1.800.2.25.6.1
A table of PPP protocol entity configuration information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013PppxConfigEntry

m013PppxConfigEntry 1.3.6.1.4.1.800.2.25.6.1.1
An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013PppxConfigEntry  

m013PppxConfigSlotIndex 1.3.6.1.4.1.800.2.25.6.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013PppxConfigPortIndex 1.3.6.1.4.1.800.2.25.6.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013PppxConfigDescription 1.3.6.1.4.1.800.2.25.6.1.1.3
A description for this PPP port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013PppxConfigAdminStatus 1.3.6.1.4.1.800.2.25.6.1.1.4
This object controls the Administrative Status of this PPP Entity. Enabled will allow the PPP Entity to operate. Disabled will disable the PPP Entity without deleting it. Delete will disable the PPP entity and delete the PPP configuration record.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), delete(3)  

m013PppxConfigMode 1.3.6.1.4.1.800.2.25.6.1.1.5
This object controls whether or not Multilink PPP will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), multilink(2)  

m013PppxConfigIpConfigAdminStatus 1.3.6.1.4.1.800.2.25.6.1.1.6
The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), close(2)  

m013PppxConfigBcpConfigAdminStatus 1.3.6.1.4.1.800.2.25.6.1.1.7
The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), close(2)  

m013PppxConfigIpxConfigAdminStatus 1.3.6.1.4.1.800.2.25.6.1.1.8
The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER open(1), close(2)  

m013PppxConfigRemoteIpAddress 1.3.6.1.4.1.800.2.25.6.1.1.9
The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

m013PppxConfigAuthenticationType 1.3.6.1.4.1.800.2.25.6.1.1.10
The desired Authentication protocol to use for this PPP connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), pap(2), chap(3)  

m013PppxConfigUserIdToRemote 1.3.6.1.4.1.800.2.25.6.1.1.11
User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013PppxConfigPasswordToRemote 1.3.6.1.4.1.800.2.25.6.1.1.12
Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013PppxConfigUserIdFromRemote 1.3.6.1.4.1.800.2.25.6.1.1.13
User ID expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013PppxConfigPasswordFromRemote 1.3.6.1.4.1.800.2.25.6.1.1.14
Password expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013PppxConfigMaxFailureCount 1.3.6.1.4.1.800.2.25.6.1.1.15
PPP LCP and NCP Negotiation Maximum Failure Count
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

m013PppxConfigMaxConfigureCount 1.3.6.1.4.1.800.2.25.6.1.1.16
PPP LCP Negotiation Maximum Configure Count
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

m013PppxConfigMaxTerminateCount 1.3.6.1.4.1.800.2.25.6.1.1.17
PPP LCP Negotiation Maximum Terminate Count
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

m013PppxConfigRetryTimeout 1.3.6.1.4.1.800.2.25.6.1.1.18
PPP LCP Negotiation Retry Timeout
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

m013PppxCpTable 1.3.6.1.4.1.800.2.25.7.1
A table of PPP connection Link Control and Network Control Protocol status and statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013PppxCpEntry

m013PppxCpEntry 1.3.6.1.4.1.800.2.25.7.1.1
An entry in the table, containing information about the PPP LCP and NCP status and statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013PppxCpEntry  

m013PppxCpSlotIndex 1.3.6.1.4.1.800.2.25.7.1.1.1
A unique value which identifies this WSM board slot that the PPP Control Protocol Entity is running on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9  

m013PppxCpPortIndex 1.3.6.1.4.1.800.2.25.7.1.1.2
A per-slot unique value which identifies this HDLC logical port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013PppxCpIpOperStatus 1.3.6.1.4.1.800.2.25.7.1.1.3
The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opened(1), not-opened(2)  

m013PppxCpIpxOperStatus 1.3.6.1.4.1.800.2.25.7.1.1.4
The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opened(1), not-opened(2)  

m013PppxCpBcpOperStatus 1.3.6.1.4.1.800.2.25.7.1.1.5
The operational status of the BCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opened(1), not-opened(2)  

m013PppxCpTxLcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.6
The total number of transmitted Link Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpRxLcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.7
The total number of received Link Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpTxIpcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.8
The total number of transmitted IP Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpRxIpcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.9
The total number of received IP Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpTxIpxcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.10
The total number of transmitted IPX Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpRxIpxcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.11
The total number of received IPX Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpTxBcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.12
The total number of transmitted Bridge Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxCpRxBcpPackets 1.3.6.1.4.1.800.2.25.7.1.1.13
The total number of received Bridge Control Protocol packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTable 1.3.6.1.4.1.800.2.25.8.1
A table of PPP connection statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013PppxStatsEntry

m013PppxStatsEntry 1.3.6.1.4.1.800.2.25.8.1.1
An entry in the table, containing information about the PPP PPP connection statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013PppxStatsEntry  

m013PppxStatsSlotIndex 1.3.6.1.4.1.800.2.25.8.1.1.1
A unique value which identifies this HSM board slot that this PPP link is running on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9  

m013PppxStatsPortIndex 1.3.6.1.4.1.800.2.25.8.1.1.2
A per-slot unique value which identifies HDLC channel that this PPP link is running on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013PppxStatsTxIPOctets 1.3.6.1.4.1.800.2.25.8.1.1.3
The total number of transmitted octets (including the PPP Header field) within routed IP format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxIPPackets 1.3.6.1.4.1.800.2.25.8.1.1.4
The total number of transmitted routed IP format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxIPOctets 1.3.6.1.4.1.800.2.25.8.1.1.5
The total number of received octets (including the PPP Header field) within routed IP format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxIPPackets 1.3.6.1.4.1.800.2.25.8.1.1.6
The total number of received routed IP format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxIPXOctets 1.3.6.1.4.1.800.2.25.8.1.1.7
The total number of transmitted octets (including the PPP Header field) within routed IPX format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxIPXPackets 1.3.6.1.4.1.800.2.25.8.1.1.8
The total number of transmitted routed IPX format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxIPXOctets 1.3.6.1.4.1.800.2.25.8.1.1.9
The total number of received octets (including the PPP Header field) within routed IPX format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxIPXPackets 1.3.6.1.4.1.800.2.25.8.1.1.10
The total number of received routed IPX format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxBPDUOctets 1.3.6.1.4.1.800.2.25.8.1.1.11
The total number of transmitted octets (including the PPP Header field) within BPDU packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxBPDUPackets 1.3.6.1.4.1.800.2.25.8.1.1.12
The total number of transmitted BPDU packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxBPDUOctets 1.3.6.1.4.1.800.2.25.8.1.1.13
The total number of received octets (including the PPP Header field) within BPDU packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxBPDUPackets 1.3.6.1.4.1.800.2.25.8.1.1.14
The total number of received BPDU packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxEthernetOctets 1.3.6.1.4.1.800.2.25.8.1.1.15
The total number of transmitted octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxEthernetPackets 1.3.6.1.4.1.800.2.25.8.1.1.16
The total number of transmitted bridged 802.3 format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxEthernetOctets 1.3.6.1.4.1.800.2.25.8.1.1.17
The total number of received octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxEthernetPackets 1.3.6.1.4.1.800.2.25.8.1.1.18
The total number of received bridged 802.3 format packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTx8025Octets 1.3.6.1.4.1.800.2.25.8.1.1.19
The total number of transmitted octets (including the PPP Header field) within 8025 packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTx8025Packets 1.3.6.1.4.1.800.2.25.8.1.1.20
The total number of transmitted 8025 packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRx8025Octets 1.3.6.1.4.1.800.2.25.8.1.1.21
The total number of received octets (including the PPP Header field) within 8025 packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRx8025Packets 1.3.6.1.4.1.800.2.25.8.1.1.22
The total number of received 8025 packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxFDDIOctets 1.3.6.1.4.1.800.2.25.8.1.1.23
The total number of transmitted octets (including the PPP Header field) within FDDI packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsTxFDDIPackets 1.3.6.1.4.1.800.2.25.8.1.1.24
The total number of transmitted FDDI packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxFDDIOctets 1.3.6.1.4.1.800.2.25.8.1.1.25
The total number of received octets (including the PPP Header field) within FDDI packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013PppxStatsRxFDDIPackets 1.3.6.1.4.1.800.2.25.8.1.1.26
The total number of received FDDI packets on this PPP connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013IPRouterIfTable 1.3.6.1.4.1.800.2.25.9.1
A list of M013 Router instances in this physical OmniSwitch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013IPRouterIfEntry

m013IPRouterIfEntry 1.3.6.1.4.1.800.2.25.9.1.1
A VLAN entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013IPRouterIfEntry  

m013IPRouterIfSlotIndex 1.3.6.1.4.1.800.2.25.9.1.1.1
Slot for channel being provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

m013IPRouterIfLogicalPortIndex 1.3.6.1.4.1.800.2.25.9.1.1.2
A per-slot unique HDLC channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

m013IPRouterIfAddress 1.3.6.1.4.1.800.2.25.9.1.1.3
The IP address for this IP interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

m013IPRouterIfSubNetMask 1.3.6.1.4.1.800.2.25.9.1.1.4
The IP network subnet mask for this IP interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

m013IPRouterIfBcastAddress 1.3.6.1.4.1.800.2.25.9.1.1.5
The IP broadcast address for this IP interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

m013IPRouterIfDescription 1.3.6.1.4.1.800.2.25.9.1.1.6
Textual description of the router instance.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

m013IPRouterIfAdmStatus 1.3.6.1.4.1.800.2.25.9.1.1.7
The particular routing environment can be enable(1) or disable(2) (or delete (3)) upon user's request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

m013IPRouterIfOperStatus 1.3.6.1.4.1.800.2.25.9.1.1.8
Provide operating status of a particular router envirnment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

m013IPRouterIfFramingType 1.3.6.1.4.1.800.2.25.9.1.1.9
Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet(1), snap(2)  

m013IPRouterIfMtu 1.3.6.1.4.1.800.2.25.9.1.1.10
Provides the ability to set the MTU size for this IP interface. The default size is 1500
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

m013IPRouterIfProtocol 1.3.6.1.4.1.800.2.25.9.1.1.11
The routing protocol(s) for this m013 router port. Which are: ipOther(1), ipRip(2), ipOspf(4), ipBgp(8), ipHello(16), ipIs-is(32)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

m013Dsx3ConfigTable 1.3.6.1.4.1.800.2.25.10.1
The DS3 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013Dsx3ConfigEntry

m013Dsx3ConfigEntry 1.3.6.1.4.1.800.2.25.10.1.1
An entry in the DS3 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013Dsx3ConfigEntry  

m013Dsx3LineIndex 1.3.6.1.4.1.800.2.25.10.1.1.1
This object is the identifier of a DS3 port on a managed device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

m013Dsx3ChannelizedMode 1.3.6.1.4.1.800.2.25.10.1.1.2
This object controls whether or not DS3 port is channelized. The default mode is enabled which means that this port is channelized to 28 T1s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3MdlEIC 1.3.6.1.4.1.800.2.25.10.1.1.3
MDL Equipment Identification Code (EIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

m013Dsx3MdlLIC 1.3.6.1.4.1.800.2.25.10.1.1.4
MDL Location Identification Code (LIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..11)  

m013Dsx3MdlFIC 1.3.6.1.4.1.800.2.25.10.1.1.5
MDL Frame Identification Code (FIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

m013Dsx3MdlUNIT 1.3.6.1.4.1.800.2.25.10.1.1.6
MDL Unit Identification Code (UNIT).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

m013Dsx3MdlPFI 1.3.6.1.4.1.800.2.25.10.1.1.7
MDL Path Facility Identification Code (PFI).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3MdlPortIdleSignalCode 1.3.6.1.4.1.800.2.25.10.1.1.8
MDL Port Idle Signal Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3MdlGenerator 1.3.6.1.4.1.800.2.25.10.1.1.9
MDL Generator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3MdlTransmitPath 1.3.6.1.4.1.800.2.25.10.1.1.10
Enables the MDL path message transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3MdlTransmitIdleSignal 1.3.6.1.4.1.800.2.25.10.1.1.11
Enables the MDL idle signal message transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3MdlTransmitTestSignal 1.3.6.1.4.1.800.2.25.10.1.1.12
Enables the MDL test signal message transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3FEACEnable 1.3.6.1.4.1.800.2.25.10.1.1.13
Allows the DS3 to send the following alarms on the FEAC channel when detected locally: - DS3 Equipment Failure - LOS - OOF - AIS Received .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3REIEnable 1.3.6.1.4.1.800.2.25.10.1.1.14
Allows the DS3 to send Remote Error Indications.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3RxMdlEnable 1.3.6.1.4.1.800.2.25.10.1.1.15
Allows the DS3 to receive MDL messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx3RxMdlEIC 1.3.6.1.4.1.800.2.25.10.1.1.16
Received MDL Equipment Identification Code (EIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

m013Dsx3RxMdlLIC 1.3.6.1.4.1.800.2.25.10.1.1.17
Received MDL Location Identification Code (LIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..11)  

m013Dsx3RxMdlFIC 1.3.6.1.4.1.800.2.25.10.1.1.18
Received MDL Frame Identification Code (FIC).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

m013Dsx3RxMdlUNIT 1.3.6.1.4.1.800.2.25.10.1.1.19
Received MDL Unit Identification Code (UNIT).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

m013Dsx3RxMdlPFI 1.3.6.1.4.1.800.2.25.10.1.1.20
Received MDL Path Facility Identification Code (PFI).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3RxMdlPortIdleSignalCode 1.3.6.1.4.1.800.2.25.10.1.1.21
Received MDL Port Idle Signal Code
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3RxMdlGenerator 1.3.6.1.4.1.800.2.25.10.1.1.22
Received MDL Generator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..38)  

m013Dsx3RemoteStatus 1.3.6.1.4.1.800.2.25.10.1.1.23
This variable indicates the Remote Line Status of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

m013Dsx3RemoteStatusLastChange 1.3.6.1.4.1.800.2.25.10.1.1.24
The value of MIB II's sysUpTime object at the time the Remote DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

m013Dsx3LedStatus 1.3.6.1.4.1.800.2.25.10.1.1.25
The LED state for this M013 Port. M013 module has 5 LEDs per port. The current bit definitions for the DS3 Port are: T3EN 0 - GRN OFF (0 off, 1 on) LOS 1 - RED OFF (0 off, 1 on) OOF 2 - RED OFF (0 off, 1 on) AIS 3 - RED OFF (0 off, 1 on) RAI 4 - YEL OFF (0 off, 1 on)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

m013Dsx3Ds1StatsEnableMask 1.3.6.1.4.1.800.2.25.10.1.1.26
This is a 28 bit mask which allows selectively enable/disable stats collection on a particular DS1 within DS3 port. Each bit corresponds to one of the 28 DS1 within DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

m013Dsx3StatsTable 1.3.6.1.4.1.800.2.25.10.2
The DS3 Statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013Dsx3StatsEntry

m013Dsx3StatsEntry 1.3.6.1.4.1.800.2.25.10.2.1
An entry in the DS3 Statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013Dsx3StatsEntry  

m013Dsx3StatsLineIndex 1.3.6.1.4.1.800.2.25.10.2.1.1
This object is the identifier of a DS3 port on a managed device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

m013Dsx3StatsRxREI 1.3.6.1.4.1.800.2.25.10.2.1.2
The number of Remote Error Indications received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

m013Dsx3StatsRxFEAC 1.3.6.1.4.1.800.2.25.10.2.1.3
This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. A value of dsx3NoFEAC(1) is returned for other cases.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dsx3NoFEAC(1), dsx3DS3EquipmentFailure(2), dsx3DS3LOS(3), dsx3DS3OutofFrame(4), dsx3DS3AISreceived(5), dsx3DS3IDLEreceived(6), dsx3DS3NonServiceAffectingEquipFailure(7), dsx3CommonEquipmentFailure(8), dsx3DS3LoopbackReceived(9), dsx3DS1ServiceAffectingEquipmentFailure(10), dsx3DS1NonServiceAffectingEquipFailure(11), dsx3SingleDS1LOS(12), dsx3MultipleDS1sLOS(13), dsx3UnknownCode(14), dsx3UnsupportedCode(15)  

m013Dsx1ConfigTable 1.3.6.1.4.1.800.2.25.11.1
The DS1 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    M013Dsx1ConfigEntry

m013Dsx1ConfigEntry 1.3.6.1.4.1.800.2.25.11.1.1
An entry in the DS3 Configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  M013Dsx1ConfigEntry  

m013Dsx1LineIndex 1.3.6.1.4.1.800.2.25.11.1.1.1
This object is the identifier of a DS1 port on a managed device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

m013Dsx1T1BertPattern 1.3.6.1.4.1.800.2.25.11.1.1.2
This variable represents T1 BERT Pattern configuration. The values mean: 1 - 2^15-1, pseudo-random O.151 test pattern (32767-bit long) 2 - 2^20-1, pseudo-random O.151 test pattern (1048575-bit long) 3 - 2^20-QRSS, pseudo-random QRSS O.151 test pattern (1048575-bit long) 4 - 2^23-1, pseudo-random O.151 test pattern (8388607-bit long) 5 - 0s, respective test pattern of all zeros 6 - 1s, respective test pattern of all ones
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..6  

m013Dsx1T1BertInterval 1.3.6.1.4.1.800.2.25.11.1.1.3
T1 BERT Interval
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

m013Dsx1T1BertFraming 1.3.6.1.4.1.800.2.25.11.1.1.4
T1 BERT Framing
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER useframing(1), noframing(2)  

m013Dsx1T1BertTestEnable 1.3.6.1.4.1.800.2.25.11.1.1.5
T1 BERT Start/Stop
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

m013Dsx1RemoteStatus 1.3.6.1.4.1.800.2.25.11.1.1.6
This variable indicates the Remote Line Status of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1023  

m013Dsx1RemoteStatusLastChange 1.3.6.1.4.1.800.2.25.11.1.1.7
The value of MIB II's sysUpTime object at the time the Remote DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER