XYLAN-IWF-MIB
File:
XYLAN-IWF-MIB.mib (36267 bytes)
Imported modules
Imported symbols
Defined Types
FrxIwfConfigEntry |
|
SEQUENCE |
|
|
|
|
frxIwfConfigAtmSlot |
INTEGER |
|
|
frxIwfConfigAtmPort |
INTEGER |
|
|
frxIwfConfigAtmVpi |
INTEGER |
|
|
frxIwfConfigAtmVci |
INTEGER |
|
|
frxIwfConfigFrSlot |
INTEGER |
|
|
frxIwfConfigFrPort |
INTEGER |
|
|
frxIwfConfigFrDlci |
INTEGER |
|
|
frxIwfConfigServiceType |
INTEGER |
|
|
frxIwfConfigSscsDlci |
INTEGER |
|
|
frxIwfConfigCIR |
INTEGER |
|
|
frxIwfConfigBc |
INTEGER |
|
|
frxIwfConfigBe |
INTEGER |
|
|
frxIwfConfigComprAdminStatus |
INTEGER |
|
|
frxIwfConfigComprPRetryTime |
INTEGER |
|
|
frxIwfConfigComprPRetryCount |
INTEGER |
|
|
frxIwfConfigRowStatus |
INTEGER |
|
FrxIwfMapEntry |
|
SEQUENCE |
|
|
|
|
frxIwfMapAtmSlot |
INTEGER |
|
|
frxIwfMapAtmPort |
INTEGER |
|
|
frxIwfMapAtmVpi |
INTEGER |
|
|
frxIwfMapAtmVci |
INTEGER |
|
|
frxIwfMapDescription |
DisplayString |
|
|
frxIwfMapType |
INTEGER |
|
|
frxIwfMapDeClpMapping |
INTEGER |
|
|
frxIwfMapDefaultClpValue |
INTEGER |
|
|
frxIwfMapCongestionMapping |
INTEGER |
|
|
frxIwfMapUlpEncapMapping |
INTEGER |
|
|
frxIwfMapUlpEncapMode |
INTEGER |
|
|
frxIwfMapLmiUserN391 |
INTEGER |
|
|
frxIwfMapLmiUserN392 |
INTEGER |
|
|
frxIwfMapLmiUserN393 |
INTEGER |
|
|
frxIwfMapLmiUserT391 |
INTEGER |
|
|
frxIwfMapLmiNetN392 |
INTEGER |
|
|
frxIwfMapLmiNetN393 |
INTEGER |
|
|
frxIwfMapLmiNetT392 |
INTEGER |
|
|
frxIwfMapOperStatus |
INTEGER |
|
|
frxIwfMapAdminStatus |
INTEGER |
|
|
frxIwfMapFrPvcStatus |
INTEGER |
|
FrxIwfStatsEntry |
|
SEQUENCE |
|
|
|
|
frxIwfStatsSlotIndex |
INTEGER |
|
|
frxIwfStatsPortIndex |
INTEGER |
|
|
frxIwfStatsVpiIndex |
INTEGER |
|
|
frxIwfStatsVciIndex |
INTEGER |
|
|
frxIwfStatsFramesIn |
INTEGER |
|
|
frxIwfStatsOctetsOut |
INTEGER |
|
|
frxIwfStatsOctetsIn |
INTEGER |
|
|
frxIwfStatsFramesOut |
INTEGER |
|
|
frxIwfStatsFr2AtmEthernet |
INTEGER |
|
|
frxIwfStatsFr2Atm8025 |
INTEGER |
|
|
frxIwfStatsFr2AtmFddi |
INTEGER |
|
|
frxIwfStatsFr2AtmIp |
INTEGER |
|
|
frxIwfStatsFr2AtmIpx |
INTEGER |
|
|
frxIwfStatsFr2AtmBpdu |
INTEGER |
|
|
frxIwfStatsFr2AtmArp |
INTEGER |
|
|
frxIwfStatsFr2AtmInArp |
INTEGER |
|
|
frxIwfStatsFr2AtmIso |
INTEGER |
|
|
frxIwfStatsFr2Atm8026 |
INTEGER |
|
|
frxIwfStatsAtm2FrEthernet |
INTEGER |
|
|
frxIwfStatsAtm2Fr8025 |
INTEGER |
|
|
frxIwfStatsAtm2FrFddi |
INTEGER |
|
|
frxIwfStatsAtm2FrIp |
INTEGER |
|
|
frxIwfStatsAtm2FrIpx |
INTEGER |
|
|
frxIwfStatsAtm2FrBpdu |
INTEGER |
|
|
frxIwfStatsAtm2FrArp |
INTEGER |
|
|
frxIwfStatsAtm2FrInArp |
INTEGER |
|
|
frxIwfStatsAtm2FrIso |
INTEGER |
|
|
frxIwfStatsAtm2Fr8026 |
INTEGER |
|
|
frxIwfStatsFr2AtmMgmt |
INTEGER |
|
|
frxIwfStatsAtm2FrMgmt |
INTEGER |
|
Defined Values
frxIwfConfigTable |
1.3.6.1.4.1.800.2.33.1.1.1 |
The FR switching and FR/ATM InterWorking
(FRF.5/FRF.8) configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FrxIwfConfigEntry |
|
frxIwfConfigEntry |
1.3.6.1.4.1.800.2.33.1.1.1.1 |
An entry in the FR/ATM IWF configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FrxIwfConfigEntry |
|
|
frxIwfConfigAtmSlot |
1.3.6.1.4.1.800.2.33.1.1.1.1.1 |
A unique value which identifies the slot which has an ASM. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..9 |
|
frxIwfConfigAtmPort |
1.3.6.1.4.1.800.2.33.1.1.1.1.2 |
A unique value which identifies the ATM port in ASM. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigAtmVpi |
1.3.6.1.4.1.800.2.33.1.1.1.1.3 |
A unique value which identifies this ATM virtual path.
Several FR PVCs can be multiplexed to a single ATM vpi/vci
for FRF.5 service only. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigAtmVci |
1.3.6.1.4.1.800.2.33.1.1.1.1.4 |
A unique value which identifies this ATM virtual channel.
Several FR PVCs can be multiplexed to a single ATM vpi/vci
for FRF.5 service only. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigFrSlot |
1.3.6.1.4.1.800.2.33.1.1.1.1.5 |
A unique value which identifies a WSM slot with FR port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..9 |
|
frxIwfConfigFrPort |
1.3.6.1.4.1.800.2.33.1.1.1.1.6 |
A unique value which identifies an FR port in a WSM. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigFrDlci |
1.3.6.1.4.1.800.2.33.1.1.1.1.7 |
Destination DLCI onto which the FR frame is switched.
For FRF.5 interworking this variable will indicate the
FR-SSCS DLCI. For FRF.8 interworking this will have the
same value as frxIwfConfigFrDlci. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigServiceType |
1.3.6.1.4.1.800.2.33.1.1.1.1.8 |
This value indicates the type of FR/ATM
interworking (FRF.5/FRF.8). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
frf5(1), frf8(2) |
|
frxIwfConfigSscsDlci |
1.3.6.1.4.1.800.2.33.1.1.1.1.9 |
For FRF.5 interworking this variable will indicate the
FR-SSCS DLCI. For FRF.8 interworking this will have the
same value as frxIwfConfigFrDlci. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigCIR |
1.3.6.1.4.1.800.2.33.1.1.1.1.10 |
Committed Information Rate for the Frame Relay PVC. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigBc |
1.3.6.1.4.1.800.2.33.1.1.1.1.11 |
Committed Burst Size for the Frame Relay PVC. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigBe |
1.3.6.1.4.1.800.2.33.1.1.1.1.12 |
Excess Burst Size for the Frame Relay PVC. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfConfigComprAdminStatus |
1.3.6.1.4.1.800.2.33.1.1.1.1.13 |
Compression Administrative State. Virtual Circuit will
attempt to negotiate for compression if this variable is
enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
frxIwfConfigComprPRetryTime |
1.3.6.1.4.1.800.2.33.1.1.1.1.14 |
The default P-Retry-Time for negotiating
mode 1 compression as described in Frame
Relay Forum Data Compression Implementation Agreement
FRF.9.
This object represents the time in seconds
between retransmission of Data Compression
Negotiation Control messages. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
frxIwfConfigComprPRetryCount |
1.3.6.1.4.1.800.2.33.1.1.1.1.15 |
The default P-Retry-Count for negotiating
mode 1 compression as described in Frame
Relay Forum Data Compression Implementation Agreement
FRF.9
This object represents the number of retries
before giving up on the negotiation phase
and not running compression on the virtual circuit. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..255 |
|
frxIwfConfigRowStatus |
1.3.6.1.4.1.800.2.33.1.1.1.1.16 |
This variable indicates the status of an entry in the table.
When this variable is set to create(1), an entry in the table
is created with default values. These values can be changed
and/or the entry can be set to active(3).
The entry is deleted by setting the RowStatus to delete(4).
The entry is made active only if the RowStatus is set to
active(3). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
create(1), inactive(2), active(3), delete(4) |
|
frxIwfMappingTable |
1.3.6.1.4.1.800.2.33.1.1.2 |
The FR/ATM InterWorking (FRF.5/FRF.8) mapping table.
When an entry is created in frxIwfConfigTable, a
corresponding entry in this table is created. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FrxIwfMapEntry |
|
frxIwfMapEntry |
1.3.6.1.4.1.800.2.33.1.1.2.1 |
An entry in the FR/ATM IWF mapping table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FrxIwfMapEntry |
|
|
frxIwfMapAtmSlot |
1.3.6.1.4.1.800.2.33.1.1.2.1.1 |
A unique value which identifies this HSM board slot. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..9 |
|
frxIwfMapAtmPort |
1.3.6.1.4.1.800.2.33.1.1.2.1.2 |
A unique value which identifies this ATM submodule port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2 |
|
frxIwfMapAtmVpi |
1.3.6.1.4.1.800.2.33.1.1.2.1.3 |
A unique value which identifies this ATM virtual path.
Several FR PVCs can be multiplexed to a single ATM vpi/vci
for FRF.5 service only. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapAtmVci |
1.3.6.1.4.1.800.2.33.1.1.2.1.4 |
A unique value which identifies this ATM virtual channel.
Several FR PVCs can be multiplexed to a single ATM vpi/vci
for FRF.5 service only. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..1023 |
|
frxIwfMapDescription |
1.3.6.1.4.1.800.2.33.1.1.2.1.5 |
The name in ascii characters describing the interface |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
frxIwfMapType |
1.3.6.1.4.1.800.2.33.1.1.2.1.6 |
A value that indicates the type of Interworking Function,
whether FRF.5/FRF.8. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
frf5(1), frf8(2) |
|
frxIwfMapDeClpMapping |
1.3.6.1.4.1.800.2.33.1.1.2.1.7 |
A value that indicates whether the mapping
between FR Discard Eligibility (DE) and the
ATM Cell Loss Priority (CLP) is enabled or not. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
frxIwfMapDefaultClpValue |
1.3.6.1.4.1.800.2.33.1.1.2.1.8 |
The value to be set in the Cell Loss Priority (CLP)
bit of the ATM cells. This is valid only in the
Frame Relay to ATM direction. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1 |
|
frxIwfMapCongestionMapping |
1.3.6.1.4.1.800.2.33.1.1.2.1.9 |
A value that indicates whether the mapping
between FR FECN and the ATM EFCI is enabled or not. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
frxIwfMapUlpEncapMapping |
1.3.6.1.4.1.800.2.33.1.1.2.1.10 |
A value that indicates whether the mapping
of the Upper Layer Protocol (ULP) encapsulation
should be enabled or not. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
frxIwfMapUlpEncapMode |
1.3.6.1.4.1.800.2.33.1.1.2.1.11 |
A value that indicates the mode of encapsulation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
transparent(1), translation(2) |
|
frxIwfMapLmiUserN391 |
1.3.6.1.4.1.800.2.33.1.1.2.1.12 |
The value of this object identifies the User-side
N391 full status polling cycle value for this
UNI/NNI logical port. If the logical port is not
performing user-side procedures, then this value
is equal to noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiUserN392 |
1.3.6.1.4.1.800.2.33.1.1.2.1.13 |
The value of this object identifies the User-side
N392 error threshold value for this UNI/NNI
logical port. If the logical port is not
performing user-side procedures, then this value
is equal to noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiUserN393 |
1.3.6.1.4.1.800.2.33.1.1.2.1.14 |
The value of this object identifies the User-side
N393 monitored events count value for this UNI/NNI
logical port. If the logical port is not
performing user-side procedures, then this value
is equal to noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiUserT391 |
1.3.6.1.4.1.800.2.33.1.1.2.1.15 |
The value of this object identifies the User-side
T391 link integrity verification polling timer
value for this UNI/NNI logical port. If the
logical port is not performing user-side
procedures, then this value is equal to
noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiNetN392 |
1.3.6.1.4.1.800.2.33.1.1.2.1.16 |
The value of this object identifies the Network-
side N392 error threshold value for this UNI/NNI
logical port. If the logical port is not
performing network-side procedures, then this
value is equal to noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiNetN393 |
1.3.6.1.4.1.800.2.33.1.1.2.1.17 |
The value of this object identifies the Network-
side N393 monitored events count value
for this UNI/NNI logical port. If the
logical port is not performing network-side
procedures, then this value is equal to
noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapLmiNetT392 |
1.3.6.1.4.1.800.2.33.1.1.2.1.18 |
The value of this object identifies the Network-
side T392 polling verification timer value
for this UNI/NNI logical port. If the
logical port is not performing network-side
procedures, then this value is equal to
noSuchName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfMapOperStatus |
1.3.6.1.4.1.800.2.33.1.1.2.1.19 |
A value that indicates the operation status of the
IWF connection. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
frxIwfMapAdminStatus |
1.3.6.1.4.1.800.2.33.1.1.2.1.20 |
This variable indicates the administrative status of
an IWF connection.
The status will be underCreation(1) when the
frxIwfConfigRowStatus is set to create. None of the
variables can be set in this state.
This variable, frxIwfMapAdminStatus should be changed to
inactive(2) from active state in order to change the values
of other fields in this table.
An entry in this table is created with default values and
made active(3) when frxSwitchRowStatus is set to active.
When the IWF is in active(3) state, only the
frxIwfMapAdminStatus can be set.
The entry or the iwf connection is deleted by setting
this variable to delete(4). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
underCreation(1), inactive(2), active(3), delete(4) |
|
frxIwfMapFrPvcStatus |
1.3.6.1.4.1.800.2.33.1.1.2.1.21 |
This variable indicates the status of FR-SSCS PVC. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(0), active(2), deleted(4), new(8) |
|
frxIwfStatsTable |
1.3.6.1.4.1.800.2.33.1.1.3 |
The FR/ATM InterWorking (FRF.5/FRF.8) configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FrxIwfStatsEntry |
|
frxIwfStatsEntry |
1.3.6.1.4.1.800.2.33.1.1.3.1 |
An entry in the FR/ATM IWF configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FrxIwfStatsEntry |
|
|
frxIwfStatsSlotIndex |
1.3.6.1.4.1.800.2.33.1.1.3.1.1 |
A unique value which identifies the slot which has an
ASM with an IWF . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..9 |
|
frxIwfStatsPortIndex |
1.3.6.1.4.1.800.2.33.1.1.3.1.2 |
A unique value which identifies this ATM submodule port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2 |
|
frxIwfStatsVpiIndex |
1.3.6.1.4.1.800.2.33.1.1.3.1.3 |
The virtual path identifier associated with this
virtual connection. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..0 |
|
frxIwfStatsVciIndex |
1.3.6.1.4.1.800.2.33.1.1.3.1.4 |
A unique value which identifies this ATM virtual channel.
Several FR PVCs can be multiplexed to a single ATM vpi/vci
for FRF.5 service only. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..1023 |
|
frxIwfStatsFramesIn |
1.3.6.1.4.1.800.2.33.1.1.3.1.5 |
The number of FR frames received by the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsOctetsOut |
1.3.6.1.4.1.800.2.33.1.1.3.1.6 |
The number of ATM octets sent out by the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsOctetsIn |
1.3.6.1.4.1.800.2.33.1.1.3.1.7 |
The number of ATM octets received by the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFramesOut |
1.3.6.1.4.1.800.2.33.1.1.3.1.8 |
The number of FR frames sent out by the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmEthernet |
1.3.6.1.4.1.800.2.33.1.1.3.1.9 |
The number of ethernet frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2Atm8025 |
1.3.6.1.4.1.800.2.33.1.1.3.1.10 |
The number of IEEE 802.5 frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmFddi |
1.3.6.1.4.1.800.2.33.1.1.3.1.11 |
The number of Fddi frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmIp |
1.3.6.1.4.1.800.2.33.1.1.3.1.12 |
The number of IP frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmIpx |
1.3.6.1.4.1.800.2.33.1.1.3.1.13 |
The number of IPX frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmBpdu |
1.3.6.1.4.1.800.2.33.1.1.3.1.14 |
The number of IPX frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmArp |
1.3.6.1.4.1.800.2.33.1.1.3.1.15 |
The number of ARP frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmInArp |
1.3.6.1.4.1.800.2.33.1.1.3.1.16 |
The number of InARP frames through the IWF in FR to ATM
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmIso |
1.3.6.1.4.1.800.2.33.1.1.3.1.17 |
The number of ISO (CLNP/ISIS) frames through the IWF
in FR to ATM direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2Atm8026 |
1.3.6.1.4.1.800.2.33.1.1.3.1.18 |
The number of IEEE 802.6 frames through the IWF
in FR to ATM direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrEthernet |
1.3.6.1.4.1.800.2.33.1.1.3.1.19 |
The number of ethernet frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2Fr8025 |
1.3.6.1.4.1.800.2.33.1.1.3.1.20 |
The number of IEEE 802.5 frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrFddi |
1.3.6.1.4.1.800.2.33.1.1.3.1.21 |
The number of Fddi frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrIp |
1.3.6.1.4.1.800.2.33.1.1.3.1.22 |
The number of IP frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrIpx |
1.3.6.1.4.1.800.2.33.1.1.3.1.23 |
The number of IPX frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrBpdu |
1.3.6.1.4.1.800.2.33.1.1.3.1.24 |
The number of IPX frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrArp |
1.3.6.1.4.1.800.2.33.1.1.3.1.25 |
The number of ARP frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrInArp |
1.3.6.1.4.1.800.2.33.1.1.3.1.26 |
The number of InARP frames through the IWF in ATM to FR
direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrIso |
1.3.6.1.4.1.800.2.33.1.1.3.1.27 |
The number of ISO (CLNP/ISIS) frames through the IWF
in ATM to FR direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2Fr8026 |
1.3.6.1.4.1.800.2.33.1.1.3.1.28 |
The number of IEEE 802.6 frames through the IWF
in ATM to FR direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsFr2AtmMgmt |
1.3.6.1.4.1.800.2.33.1.1.3.1.29 |
The number of Management frames through IWF in FR to
ATM direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
frxIwfStatsAtm2FrMgmt |
1.3.6.1.4.1.800.2.33.1.1.3.1.30 |
The number of Management frames through IWF in ATM to
FR direction. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|