XYLAN-DS1-MIB

File: XYLAN-DS1-MIB.mib (12328 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
XYLAN-BASE-MIB

Imported symbols

Counter TimeTicks OBJECT-TYPE
DisplayString xylanPportArch

Defined Types

Dsx1PortConfigEntry  
SEQUENCE    
  dsx1PortConfigSlotIndex INTEGER
  dsx1PortConfigPortIndex INTEGER
  dsx1PortConfigIfType INTEGER
  dsx1PortFdlRole INTEGER
  dsx1PortNfasAlign INTEGER
  dsx1PortConfigYelAlarmDetectEnable INTEGER

Dsx1PortStatsEntry  
SEQUENCE    
  dsx1PortStatsSlotIndex INTEGER
  dsx1PortStatsPortIndex INTEGER
  dsx1PortStatsLossOfSignal Counter
  dsx1PortStatsOutOfFrame Counter
  dsx1PortStatsRedAlarmEvent Counter
  dsx1PortStatsYellowAlarmEvent Counter
  dsx1PortStatsSquelchAlarmEvent Counter
  dsx1PortStatsBipolarVioEvent Counter
  dsx1PortStatsAISEvent Counter
  dsx1PortStatsCrcErrorEvent Counter
  dsx1PortStatsOutOfSubMultiFrame Counter
  dsx1PortStatsOutOfTs16MultiFrame Counter
  dsx1PortStatsRemFrameAlarm Counter
  dsx1PortStatsRemMultiFrameAlarm Counter
  dsx1PortStatsFarEndBlkError Counter
  dsx1PortStatsFramingBitError Counter

Defined Values

dsx1Port 1.3.6.1.4.1.800.2.11.1
OBJECT IDENTIFIER    

dsx1PortConfigTable 1.3.6.1.4.1.800.2.11.1.1
A table of Dsx1 physical layer status and parameter information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1PortConfigEntry

dsx1PortConfigEntry 1.3.6.1.4.1.800.2.11.1.1.1
An entry in the table, containing information about the physical layer of a Dsx1 interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1PortConfigEntry  

dsx1PortConfigSlotIndex 1.3.6.1.4.1.800.2.11.1.1.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

dsx1PortConfigPortIndex 1.3.6.1.4.1.800.2.11.1.1.1.2
A unique value which identifies this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

dsx1PortConfigIfType 1.3.6.1.4.1.800.2.11.1.1.1.3
The type of interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER t1(1), e1(2)  

dsx1PortFdlRole 1.3.6.1.4.1.800.2.11.1.1.1.4
Indicates Facility Data Link port role of this port. If the port role is network and fdlMode is set to AT&T 54016, then this port periodically sends AT&T performance requests to CI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(1), user(2)  

dsx1PortNfasAlign 1.3.6.1.4.1.800.2.11.1.1.1.5
This object indicates if framing criterion is based on bit 2 of Time Slot 0 NOT-FAS. This object only applies to E1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dsx1PortConfigYelAlarmDetectEnable 1.3.6.1.4.1.800.2.11.1.1.1.6
This object indicates whether Yellow Alarm should be detected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

dsx1PortStatsTable 1.3.6.1.4.1.800.2.11.1.2
A table of Dsx1 physical port statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dsx1PortStatsEntry

dsx1PortStatsEntry 1.3.6.1.4.1.800.2.11.1.2.1
An entry in the table, containing information about the physical port statistics of a Dsx1 interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Dsx1PortStatsEntry  

dsx1PortStatsSlotIndex 1.3.6.1.4.1.800.2.11.1.2.1.1
A unique value which identifies this HSM board slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..9  

dsx1PortStatsPortIndex 1.3.6.1.4.1.800.2.11.1.2.1.2
A unique value which identifies this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

dsx1PortStatsLossOfSignal 1.3.6.1.4.1.800.2.11.1.2.1.3
Total number of Loss of Signals that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsOutOfFrame 1.3.6.1.4.1.800.2.11.1.2.1.4
Total number of Out of Frames that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsRedAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.5
Total number of Red Alarm events that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsYellowAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.6
Total number of Yellow Alarm events that have been detected on this port. This object applies to T1 port only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsSquelchAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.7
Total number of Squelch Alarm events that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsBipolarVioEvent 1.3.6.1.4.1.800.2.11.1.2.1.8
Total number of Bipolar Violation events that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsAISEvent 1.3.6.1.4.1.800.2.11.1.2.1.9
Total number of AIS events that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsCrcErrorEvent 1.3.6.1.4.1.800.2.11.1.2.1.10
Total number of ESF CRC-6 Error events for T1 or CRC-4 Error Events for E1 that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsOutOfSubMultiFrame 1.3.6.1.4.1.800.2.11.1.2.1.11
Total number of out of sub-multiframe events that have been detected on this port. This object only applies to E1 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsOutOfTs16MultiFrame 1.3.6.1.4.1.800.2.11.1.2.1.12
Total number of out of TS 16 multiframe events that have been detected on this port. This object only applies to E1 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsRemFrameAlarm 1.3.6.1.4.1.800.2.11.1.2.1.13
Total number of Remote Frame Alarm events that have been detected on this port. This object only applies to E1 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsRemMultiFrameAlarm 1.3.6.1.4.1.800.2.11.1.2.1.14
Total number of Remote MultifFame Alarm events that have been detected on this port. This object only applies to E1 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsFarEndBlkError 1.3.6.1.4.1.800.2.11.1.2.1.15
Total number of Far End Block Error events that have been detected on this port. This object only applies to E1 port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

dsx1PortStatsFramingBitError 1.3.6.1.4.1.800.2.11.1.2.1.16
Total number of Framing Bit Error events that have been detected on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor