XEDIA-DS3-MIB
File:
XEDIA-DS3-MIB.mib (16450 bytes)
Imported modules
Imported symbols
Defined Types
XDsx3LineStatus |
|
This type is a bit string representing a sum of line conditions,
therefore, it can indicate multiple failures and loopback
simultaneously. The value dsx3NoAlarm is set if and only if no
other flag is set. |
TEXTUAL-CONVENTION |
|
|
|
|
BIT STRING |
dsx3NoAlarm(0), dsx3RcvRAIFailure(1), dsx3XmitRAIAlarm(2), dsx3RcvAIS(3), dsx3XmitAIS(4), dsx3LOF(5), dsx3LOS(6), dsx3LoopbackState(7), dsx3RcvTestCode(8), dsx3OtherFailure(9), dsx3UnavailSigState(10), dsx3NetEquipOOS(11) |
|
XDsx3ConfigEntry |
|
SEQUENCE |
|
|
|
|
xdsx3LineStatus |
XDsx3LineStatus |
|
|
xdsx3LoopbackStatus |
BIT STRING |
|
|
xdsx3Scrambling |
INTEGER |
|
XDsx3CurrentEntry |
|
SEQUENCE |
|
|
|
|
xdsx3CurrentFBEs |
PerfCurrentCount |
|
|
xdsx3CurrentFEBEs |
PerfCurrentCount |
|
|
xdsx3CurrentPBESs |
PerfCurrentCount |
|
|
xdsx3CurrentCBESs |
PerfCurrentCount |
|
|
xdsx3CurrentLocalLineStatus |
XDsx3LineStatus |
|
|
xdsx3CurrentRemoteLineStatus |
XDsx3LineStatus |
|
XDsx3IntervalEntry |
|
SEQUENCE |
|
|
|
|
xdsx3IntervalFBEs |
PerfIntervalCount |
|
|
xdsx3IntervalFEBEs |
PerfIntervalCount |
|
|
xdsx3IntervalPBESs |
PerfIntervalCount |
|
|
xdsx3IntervalCBESs |
PerfIntervalCount |
|
|
xdsx3IntervalLocalLineStatus |
XDsx3LineStatus |
|
|
xdsx3IntervalRemoteLineStatus |
XDsx3LineStatus |
|
XDsx3TotalEntry |
|
SEQUENCE |
|
|
|
|
xdsx3TotalFBEs |
PerfTotalCount |
|
|
xdsx3TotalFEBEs |
PerfTotalCount |
|
|
xdsx3TotalPBESs |
PerfTotalCount |
|
|
xdsx3TotalCBESs |
PerfTotalCount |
|
|
xdsx3TotalLocalLineStatus |
XDsx3LineStatus |
|
|
xdsx3TotalRemoteLineStatus |
XDsx3LineStatus |
|
Defined Values
xediaDs3MIB |
1.3.6.1.4.1.838.3.11 |
This module defines additional objects for management of DS3
links in Xedia devices, above and beyond what is defined in the
standard DS3 mib, and proposed drafts. |
MODULE-IDENTITY |
|
|
|
xDs3Tables |
1.3.6.1.4.1.838.3.11.2 |
OBJECT IDENTIFIER |
|
|
|
xDsx3ConfigTable |
1.3.6.1.4.1.838.3.11.2.1 |
The Xedia DS3 Config table contains extensions to
the DS3 Config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XDsx3ConfigEntry |
|
xDsx3ConfigEntry |
1.3.6.1.4.1.838.3.11.2.1.1 |
An entry in the Xedia DS3 Config table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XDsx3ConfigEntry |
|
|
xdsx3LineStatus |
1.3.6.1.4.1.838.3.11.2.1.1.1 |
Indicates the line status of the interface. This obect
is identical to dsx3LineStatus in the DS3 MIB except
that it uses the SNMPv2 BIT STRING object type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xdsx3LoopbackStatus |
1.3.6.1.4.1.838.3.11.2.1.1.2 |
Indicates the local and remote loopback status of the
interface. This object is identical to dsx3LoopbackStatus
in the DS3 MIB except that it uses the SNMPv2 BIT STRING
object type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BIT STRING |
dsx3NoLoopback(0), dsx3NearEndPayloadLoopback(1), dsx3NearEndLineLoopback(2), dsx3NearEndOtherLoopback(3), dsx3NearEndInwardLoopback(4), dsx3FarEndPayloadLoopback(5), dsx3FarEndLineLoopback(6) |
|
xdsx3Scrambling |
1.3.6.1.4.1.838.3.11.2.1.1.3 |
The status of payload scrambling type
is enabled at the data port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dsx3None(1), dsx3Cisco(2), dsx3Kentrox(3) |
|
xDsx3CurrentTable |
1.3.6.1.4.1.838.3.11.2.2 |
The Xedia DS3 Current table contains extensions to
the DS3 Current table which includes statistics
being collected for the current 15 minute interval. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XDsx3CurrentEntry |
|
xDsx3CurrentEntry |
1.3.6.1.4.1.838.3.11.2.2.1 |
An entry in the Xedia DS3 Current table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XDsx3CurrentEntry |
|
|
xdsx3CurrentFBEs |
1.3.6.1.4.1.838.3.11.2.2.1.1 |
The number of F and M Frame Bit Errored Seconds
encountered during the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfCurrentCount |
|
|
xdsx3CurrentFEBEs |
1.3.6.1.4.1.838.3.11.2.2.1.2 |
The number of Far End Block Errors encountered
in the current 15 minute interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfCurrentCount |
|
|
xdsx3CurrentPBESs |
1.3.6.1.4.1.838.3.11.2.2.1.3 |
The number of P-Bit Bursty Errored Seconds (PBES)
encountered during the current 15 minute interval.
A PBES is a second with more than 1 and less than
45 ocurring p-bit coding violations and NO Out of
Frame defects nor detected incoming AIS. This gauge
is not incremented when UASs are counted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfCurrentCount |
|
|
xdsx3CurrentCBESs |
1.3.6.1.4.1.838.3.11.2.2.1.4 |
The number of C-Bit Bursty Errored Seconds (CBES)
encountered during the current 15 minute interval.
A CBES is a second with more than 1 and less than
45 ocurring c-bit coding violations and NO Out of
Frame defects nor detected incoming AIS. This gauge
is not incremented when UASs are counted. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfCurrentCount |
|
|
xdsx3CurrentLocalLineStatus |
1.3.6.1.4.1.838.3.11.2.2.1.5 |
The bitwise ORing of the dsx3LineStatus values (local
line status) encountered during the current 15
minute interval. This object is useful in identifying
all xdsx3LineStatus conditions which occured during
the interval including the NO_ALARM condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xdsx3CurrentRemoteLineStatus |
1.3.6.1.4.1.838.3.11.2.2.1.6 |
The bitwise ORing of the far end dsx3LineStatus values
(remote line status) encountered during the current 15
minute interval. This object is useful in identifying
all dsx3LineStatus conditions which occured during the
interval including the NO_ALARM condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xDsx3IntervalTable |
1.3.6.1.4.1.838.3.11.2.3 |
The Xedia DS3 Interval Table contains extensions to
the DS3 Interval table which includes statistics
collected over the previous 24 hours of operation.
The past 24 hours are broken into 96 completed 15
minute intervals. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XDsx3IntervalEntry |
|
xDsx3IntervalEntry |
1.3.6.1.4.1.838.3.11.2.3.1 |
An entry in the Xedia DS3 Interval Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XDsx3IntervalEntry |
|
|
xdsx3IntervalFBEs |
1.3.6.1.4.1.838.3.11.2.3.1.1 |
The number of F and M Frame Bit Errored Seconds
encountered during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfIntervalCount |
|
|
xdsx3IntervalFEBEs |
1.3.6.1.4.1.838.3.11.2.3.1.2 |
The number of Far End Block Errors encountered
during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfIntervalCount |
|
|
xdsx3IntervalPBESs |
1.3.6.1.4.1.838.3.11.2.3.1.3 |
The number of P-Bit Bursty Errored Seconds (PBES)
encountered during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfIntervalCount |
|
|
xdsx3IntervalCBESs |
1.3.6.1.4.1.838.3.11.2.3.1.4 |
The number of C-Bit Bursty Errored Seconds (CBES)
encountered during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfIntervalCount |
|
|
xdsx3IntervalLocalLineStatus |
1.3.6.1.4.1.838.3.11.2.3.1.5 |
The bitwise ORing of the dsx3LineStatus values (local
line status) encountered during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xdsx3IntervalRemoteLineStatus |
1.3.6.1.4.1.838.3.11.2.3.1.6 |
The bitwise ORing of the far end dsx3LineStatus values
(remote line status) encountered during the interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xDsx3TotalTable |
1.3.6.1.4.1.838.3.11.2.4 |
The Xedia DS3 Total Table contains extensions to the
DS3 Total table which includes cumulative sums of the
various statistics for the 24 hour period preceding
the current interval. Invalid 15 minute intervals count
as 0. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XDsx3TotalEntry |
|
xDsx3TotalEntry |
1.3.6.1.4.1.838.3.11.2.4.1 |
An entry in the Xedai DS3 Total Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XDsx3TotalEntry |
|
|
xdsx3TotalFBEs |
1.3.6.1.4.1.838.3.11.2.4.1.1 |
The sum of F and M Frame Bit Errored Seconds
for all intervals in the interval table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfTotalCount |
|
|
xdsx3TotalFEBEs |
1.3.6.1.4.1.838.3.11.2.4.1.2 |
The sum of Far End Block Errors for all intervals
in the interval table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfTotalCount |
|
|
xdsx3TotalPBESs |
1.3.6.1.4.1.838.3.11.2.4.1.3 |
The sum of P-Bit Bursty Errored Seconds (PBES)
for all intervals in the interval table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfTotalCount |
|
|
xdsx3TotalCBESs |
1.3.6.1.4.1.838.3.11.2.4.1.4 |
The sum of C-Bit Bursty Errored Seconds (CBES)
for all intervals in the interval table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PerfTotalCount |
|
|
xdsx3TotalLocalLineStatus |
1.3.6.1.4.1.838.3.11.2.4.1.5 |
The bitwise ORing of the dsx3LineStatus values (local
line status) for all intervals in the interval table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xdsx3TotalRemoteLineStatus |
1.3.6.1.4.1.838.3.11.2.4.1.6 |
The bitwise ORing of the far end dsx3LineStatus values
(remote line status) for all intervals in the interval
table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
XDsx3LineStatus |
|
|
xDs3Groups |
1.3.6.1.4.1.838.3.11.3.2 |
OBJECT IDENTIFIER |
|
|
|
xDs3Compliance |
1.3.6.1.4.1.838.3.11.3.1.1 |
The compliance statement for all agents that support this
MIB. A compliant agent implements all objects defined in this
MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
xDs3AllGroup |
1.3.6.1.4.1.838.3.11.3.2.1 |
The set of all accessible objects in this MIB. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|