Wellfleet-WCP-MIB

File: Wellfleet-WCP-MIB.mib (55897 bytes)

Imported modules

RFC1155-SMI RFC-1212 Wellfleet-COMMON-MIB

Imported symbols

Counter OBJECT-TYPE wfCompressionGroup

Defined Types

WfWcpLineEntry  
SEQUENCE    
  wfWcpLineDelete INTEGER
  wfWcpLineDisable INTEGER
  wfWcpLineLineNumber INTEGER
  wfWcpLineLLIndex INTEGER
  wfWcpLineCompressionMode INTEGER
  wfWcpLineHistorySize INTEGER
  wfWcpLineBufferSize INTEGER
  wfWcpLineEngineType INTEGER
  wfWcpLineSearchDepth INTEGER
  wfWcpLineFallbackCompressionMode INTEGER
  wfWcpLineClientCompressorRingSize INTEGER
  wfWcpLineClientDecompressorRingSize INTEGER

WfWcpCircuitEntry  
SEQUENCE    
  wfWcpCircuitDelete INTEGER
  wfWcpCircuitDisable INTEGER
  wfWcpCircuitId INTEGER
  wfWcpCircuitCompressionMode INTEGER
  wfWcpCircuitHistorySize INTEGER
  wfWcpCircuitEngineType INTEGER
  wfWcpCircuitSearchDepth INTEGER
  wfWcpCircuitCompressorOutBytes Counter
  wfWcpCircuitDecompressorOutBytes Counter

WfWcpVcEntry  
SEQUENCE    
  wfWcpVcCompressorState INTEGER
  wfWcpVcDecompressorState INTEGER
  wfWcpVcLineNumber INTEGER
  wfWcpVcLLIndex INTEGER
  wfWcpVcCircuitId INTEGER
  wfWcpVcId INTEGER
  wfWcpVcCompressionMode INTEGER
  wfWcpVcHistorySize INTEGER
  wfWcpVcCompressorInBytes Counter
  wfWcpVcCompressorOutBytes Counter
  wfWcpVcDecompressorInBytes Counter
  wfWcpVcDecompressorOutBytes Counter
  wfWcpVcTxCPCPackets Counter
  wfWcpVcRxCPCPackets Counter
  wfWcpVcTxPPCPackets Counter
  wfWcpVcRxPPCPackets Counter
  wfWcpVcTxAntiExpPackets Counter
  wfWcpVcRxAntiExpPackets Counter
  wfWcpVcTxResetReqs Counter
  wfWcpVcRxResetReqs Counter
  wfWcpVcTxRexmitReqs Counter
  wfWcpVcRxRexmitReqs Counter
  wfWcpVcTxRexmitNaks Counter
  wfWcpVcRxRexmitNaks Counter
  wfWcpVcDataOutOfSeqs Counter
  wfWcpVcRexmitOutOfSeqs Counter
  wfWcpVcRexmitTimeouts Counter
  wfWcpVcExceededKs Counter
  wfWcpVcInvalidOpCodes Counter
  wfWcpVcEngineType INTEGER
  wfWcpVcSearchDepth INTEGER

WfHwCompEntry  
SEQUENCE    
  wfHwCompState INTEGER
  wfHwCompSlot INTEGER
  wfHwCompModule INTEGER
  wfHwCompEngineNumber INTEGER
  wfHwCompCompressionHistoryTotal INTEGER
  wfHwCompCompressionHashTblSize INTEGER
  wfHwCompDecompressionHistoryTotal INTEGER
  wfHwComp8kContextsTotal INTEGER
  wfHwComp32kContextsTotal INTEGER
  wfHwComp8kCpcContextsInUse INTEGER
  wfHwComp8kPpcContextsInUse INTEGER
  wfHwComp32kContextsInUse INTEGER
  wfHwComp8kContextsAvailable INTEGER
  wfHwComp32kContextsAvailable INTEGER
  wfHwCompCpcContextsRegistered INTEGER
  wfHwCompPpcContextsRegistered INTEGER
  wfHwCompCompressionTotalRingSize INTEGER
  wfHwCompDecompressionTotalRingSize INTEGER
  wfHwCompCompressionCurrentQueued INTEGER
  wfHwCompDecompressionCurrentQueued INTEGER
  wfHwCompCompressionQHiWatermark INTEGER
  wfHwCompDecompressionQHiWatermark INTEGER
  wfHwCompCompressionPkts Counter
  wfHwCompDecompressionPkts Counter
  wfHwCompTxExpandedPkts Counter
  wfHwCompTxNonCompressedPkts Counter
  wfHwCompRxNonCompressedPkts Counter
  wfHwCompRxDroppedPkts Counter
  wfHwCompRxLcbMismatches Counter
  wfHwCompCompressionRingOverflows Counter
  wfHwCompDecompressionRingOverflows Counter
  wfHwCompCompressionErrors Counter
  wfHwCompDecompressionErrors Counter
  wfHwCompCompressionSrcPktLenErrors Counter
  wfHwCompCompressionCcbFormatErrors Counter
  wfHwCompCompressionDescFormatErrors Counter
  wfHwCompCompressionInternalErrors Counter
  wfHwCompDecompressionSrcPktLenErrors Counter
  wfHwCompDecompressionCcbFormatErrors Counter
  wfHwCompDecompressionDescFormatErrors Counter
  wfHwCompDecompressionInternalErrors Counter
  wfHwCompChipType INTEGER
  wfHwCompMsaCpcContextsRegistered INTEGER
  wfHwCompMsaPpcContextsRegistered INTEGER
  wfHwCompMsa8KContextsGuaranteed INTEGER
  wfHwCompStacContextsTotal INTEGER
  wfHwCompStacCpcContextsRegistered INTEGER
  wfHwCompStacPpcContextsRegistered INTEGER
  wfHwCompStacPpcContextsInUse INTEGER
  wfHwCompStacContextsAvailable INTEGER
  wfHwCompStacContextsGuaranteed INTEGER
  wfHwCompMsaCompressedPkts Counter
  wfHwCompStacCompressedPkts Counter
  wfHwCompMsaDecompressedPkts Counter
  wfHwCompStacDecompressedPkts Counter
  wfHwCompMsaTxExpandedPkts Counter
  wfHwCompStacTxExpandedPkts Counter
  wfHwCompMsaTxNonCompressedPkts Counter
  wfHwCompStacTxNonCompressedPkts Counter
  wfHwCompMsaRxNonCompressedPkts Counter
  wfHwCompStacRxNonCompressedPkts Counter

WfStacCircuitEntry  
SEQUENCE    
  wfStacCircuitDelete INTEGER
  wfStacCircuitDisable INTEGER
  wfStacCircuitId INTEGER
  wfStacCircuitEngineType INTEGER
  wfStacCircuitCompressionMode INTEGER
  wfStacCircuitCompressorState INTEGER
  wfStacCircuitDecompressorState INTEGER
  wfStacCircuitFallBackCompressionMode INTEGER
  wfStacCircuitCompressorInBytes Counter
  wfStacCircuitCompressorOutBytes Counter
  wfStacCircuitDecompressorInBytes Counter
  wfStacCircuitDecompressorOutBytes Counter
  wfStacCircuitTxMode0Packets Counter
  wfStacCircuitRxMode0Packets Counter
  wfStacCircuitTxMode3Packets Counter
  wfStacCircuitRxMode3Packets Counter
  wfStacCircuitTxExpPackets Counter
  wfStacCircuitRxExpPackets Counter
  wfStacCircuitTxResetReqs Counter
  wfStacCircuitRxResetReqs Counter

Defined Values

wfWcpLineTable 1.3.6.1.4.1.18.3.4.22.1
The line table contains line entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfWcpLineEntry

wfWcpLineEntry 1.3.6.1.4.1.18.3.4.22.1.1
The components of the instance ID of a line entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfWcpLineEntry  

wfWcpLineDelete 1.3.6.1.4.1.18.3.4.22.1.1.1
Indicates whether the instance have been created or deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfWcpLineDisable 1.3.6.1.4.1.18.3.4.22.1.1.2
Indicates whether the instance have been enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfWcpLineLineNumber 1.3.6.1.4.1.18.3.4.22.1.1.3
instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpLineLLIndex 1.3.6.1.4.1.18.3.4.22.1.1.4
instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpLineCompressionMode 1.3.6.1.4.1.18.3.4.22.1.1.5
line is relatively noisy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cpc(1), ppc(2)  

wfWcpLineHistorySize 1.3.6.1.4.1.18.3.4.22.1.1.6
line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER k32(1), k8(2)  

wfWcpLineBufferSize 1.3.6.1.4.1.18.3.4.22.1.1.7
used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER verylarge(1), large(2), normal(3), none(4)  

wfWcpLineEngineType 1.3.6.1.4.1.18.3.4.22.1.1.8
Indicates whether to use hardware or software compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER software(1), hardware(2)  

wfWcpLineSearchDepth 1.3.6.1.4.1.18.3.4.22.1.1.9
This attribute is only relevant for HW Compression VCs configured for CPC, 8K history. It indicates the Search Depth configured for this line. Increasing this attribute may allow the user to achieve better Compression ratios. This however could occur at the expense of throughput (i.e. you may get better compression ratios, but lower throughput). Note that this value may be set to 0, if the user wishes to run their Line in High Speed mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

wfWcpLineFallbackCompressionMode 1.3.6.1.4.1.18.3.4.22.1.1.10
This attribute is only relevant for HW Compression VCs configured for CPC. It indicates what Compression Mode the user wants All VCs on a line to use, when any VC on that line is unable to register for HW Compression due to a lack of physical HW Context memory (Note that only HW CPC contexts can fail registration in this way).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER softwarecpc(1), hardwareppc(2), none(3)  

wfWcpLineClientCompressorRingSize 1.3.6.1.4.1.18.3.4.22.1.1.11
Specifies the client compressor ring size for clients of this line. The default value is ZERO which will cause the hardware compression to assign the hard coded default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfWcpLineClientDecompressorRingSize 1.3.6.1.4.1.18.3.4.22.1.1.12
Specifies the client decompressor ring size for clients of this line. The default value is ZERO which will cause the hardware compression to assign the hard coded default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfWcpCircuitTable 1.3.6.1.4.1.18.3.4.22.2
The circuit table contains circuit entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfWcpCircuitEntry

wfWcpCircuitEntry 1.3.6.1.4.1.18.3.4.22.2.1
The components of the instance ID of a circuit entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfWcpCircuitEntry  

wfWcpCircuitDelete 1.3.6.1.4.1.18.3.4.22.2.1.1
Indicates whether the instance have been created or deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfWcpCircuitDisable 1.3.6.1.4.1.18.3.4.22.2.1.2
Indicates whether the instance have been enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfWcpCircuitId 1.3.6.1.4.1.18.3.4.22.2.1.3
Indicates the circuit ID of this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpCircuitCompressionMode 1.3.6.1.4.1.18.3.4.22.2.1.4
suitable when the line is relatively noisy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cpc(1), ppc(2), inherit(3)  

wfWcpCircuitHistorySize 1.3.6.1.4.1.18.3.4.22.2.1.5
circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER k32(1), k8(2), inherit(3)  

wfWcpCircuitEngineType 1.3.6.1.4.1.18.3.4.22.2.1.6
Indicates whether to use hardware or software compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER software(1), hardware(2), inherit(3)  

wfWcpCircuitSearchDepth 1.3.6.1.4.1.18.3.4.22.2.1.7
This attribute is only relevant for HW Compression VCs configured for CPC, 8K history. It indicates the Search Depth configured for this circuit. Increasing this attribute may allow the user to achieve better Compression ratios. This however could occur at the expense of throughput (i.e. you may get better compression ratios, but lower throughput). Note that this value may be set to 0, if the user wishes to run this circuit in High Speed mode. Note that the default value of 256 is actually used to indicate that that this attribute should be inherited from wfWcpLineEntry MIB & is not a valid search depth value. Valid Search Depth values lie within the 1..255 range.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

wfWcpCircuitCompressorOutBytes 1.3.6.1.4.1.18.3.4.22.2.1.8
Indicates the number of bytes produced by the compressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpCircuitDecompressorOutBytes 1.3.6.1.4.1.18.3.4.22.2.1.9
Indicates the number of bytes produced by the decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTable 1.3.6.1.4.1.18.3.4.22.3
The VC table contains VC entries
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfWcpVcEntry

wfWcpVcEntry 1.3.6.1.4.1.18.3.4.22.3.1
The components of the instance ID of a VC entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfWcpVcEntry  

wfWcpVcCompressorState 1.3.6.1.4.1.18.3.4.22.3.1.1
Indicates the VC compressor state of the WCP logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER data(1), disabled(2), disconnected(3), init(4), nak(5)  

wfWcpVcDecompressorState 1.3.6.1.4.1.18.3.4.22.3.1.2
Indicates the VC decompressor state of the WCP logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER data(1), disabled(2), disconnected(3), init(4), rexmit(5), reset(6), connecting(7), disconnecting(8)  

wfWcpVcLineNumber 1.3.6.1.4.1.18.3.4.22.3.1.3
instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpVcLLIndex 1.3.6.1.4.1.18.3.4.22.3.1.4
instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpVcCircuitId 1.3.6.1.4.1.18.3.4.22.3.1.5
ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpVcId 1.3.6.1.4.1.18.3.4.22.3.1.6
Indicates the ID of this VC entry. This is part of the instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfWcpVcCompressionMode 1.3.6.1.4.1.18.3.4.22.3.1.7
line is relatively noisy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cpc(1), ppc(2)  

wfWcpVcHistorySize 1.3.6.1.4.1.18.3.4.22.3.1.8
VC. HIGH will allow the highest compression ratio to be realized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER k32(1), k8(2)  

wfWcpVcCompressorInBytes 1.3.6.1.4.1.18.3.4.22.3.1.9
Indicates the number of bytes submitted to the compressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcCompressorOutBytes 1.3.6.1.4.1.18.3.4.22.3.1.10
Indicates the number of bytes produced by the compressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcDecompressorInBytes 1.3.6.1.4.1.18.3.4.22.3.1.11
Indicates the number of bytes submitted to the decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcDecompressorOutBytes 1.3.6.1.4.1.18.3.4.22.3.1.12
Indicates the number of bytes produced by the decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxCPCPackets 1.3.6.1.4.1.18.3.4.22.3.1.13
Indicates the number of continuous mode packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxCPCPackets 1.3.6.1.4.1.18.3.4.22.3.1.14
Indicates the number of continuous mode packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxPPCPackets 1.3.6.1.4.1.18.3.4.22.3.1.15
Indicates the number of PPC mode packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxPPCPackets 1.3.6.1.4.1.18.3.4.22.3.1.16
Indicates the number of PPC mode packets Received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxAntiExpPackets 1.3.6.1.4.1.18.3.4.22.3.1.17
Indicates the number of anti-expanded packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxAntiExpPackets 1.3.6.1.4.1.18.3.4.22.3.1.18
Indicates the number of anti-expanded packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxResetReqs 1.3.6.1.4.1.18.3.4.22.3.1.19
Indicates the number of reset request sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxResetReqs 1.3.6.1.4.1.18.3.4.22.3.1.20
Indicates the number of reset request received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxRexmitReqs 1.3.6.1.4.1.18.3.4.22.3.1.21
Indicates the number of re-transmit request sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxRexmitReqs 1.3.6.1.4.1.18.3.4.22.3.1.22
Indicates the number of re-transmit request received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcTxRexmitNaks 1.3.6.1.4.1.18.3.4.22.3.1.23
Indicates the number of re-transmit Nak sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRxRexmitNaks 1.3.6.1.4.1.18.3.4.22.3.1.24
Indicates the number of re-transmit Nak received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcDataOutOfSeqs 1.3.6.1.4.1.18.3.4.22.3.1.25
Indicates the number of times that a data indication is out of sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRexmitOutOfSeqs 1.3.6.1.4.1.18.3.4.22.3.1.26
Indicates the number of times that a re-transmit Ack is out of sequence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcRexmitTimeouts 1.3.6.1.4.1.18.3.4.22.3.1.27
Indicates the number of re-transmit timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcExceededKs 1.3.6.1.4.1.18.3.4.22.3.1.28
Indicates the number of times that K is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcInvalidOpCodes 1.3.6.1.4.1.18.3.4.22.3.1.29
Indicates the number of packets received with invalid op code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfWcpVcEngineType 1.3.6.1.4.1.18.3.4.22.3.1.30
Indicates whether hardware or software compression is used
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER software(1), hardware(2), none(3)  

wfWcpVcSearchDepth 1.3.6.1.4.1.18.3.4.22.3.1.31
This attribute is only relevant for HW Compression VCs configured for CPC, 8K history. It indicates the Search Depth configured for this VC. Increasing this attribute may allow the user to achieve better Compression ratios. This however could occur at the expense of throughput (i.e. you may get better compression ratios, but lower throughput). Note that this value may be 0, if the user wishes to run their VC in High Speed Mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompTable 1.3.6.1.4.1.18.3.4.22.4
The HW Compression Table contains compression entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfHwCompEntry

wfHwCompEntry 1.3.6.1.4.1.18.3.4.22.4.1
Slot number used as instance identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfHwCompEntry  

wfHwCompState 1.3.6.1.4.1.18.3.4.22.4.1.1
Driver state variable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3)  

wfHwCompSlot 1.3.6.1.4.1.18.3.4.22.4.1.2
Slot number -- gotten from the instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompModule 1.3.6.1.4.1.18.3.4.22.4.1.3
Module # -- gotten from the instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompEngineNumber 1.3.6.1.4.1.18.3.4.22.4.1.4
Compression Engine #. Gotten from the instance ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionHistoryTotal 1.3.6.1.4.1.18.3.4.22.4.1.5
The amount of memory allocated for Compression History.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionHashTblSize 1.3.6.1.4.1.18.3.4.22.4.1.6
The amount of memory allocated for Compression Hash Tables. These Hash Tables are used to do lookups in Compression History memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompDecompressionHistoryTotal 1.3.6.1.4.1.18.3.4.22.4.1.7
The amount of memory allocated for Decompression History.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp8kContextsTotal 1.3.6.1.4.1.18.3.4.22.4.1.8
This indicates the maximum number of 8KB Context Control Blocks (CCBs) (i.e. VC's) we can support with this memory configuration. This is assuming ALL VC's using Variable Search Depth Mode, 8KB history size. This equals wfHwCompCompressionHistoryTotal divided by 8KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp32kContextsTotal 1.3.6.1.4.1.18.3.4.22.4.1.9
This indicates the maximum number of 32KB Context Control Blocks (CCBs) (i.e. VC's) we can support with this memory configuration. This is assuming ALL VC's using High Speed, Single Search Mode, 32KB history size. This equals wfHwCompCompressionHistoryTotal divided by 32KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp8kCpcContextsInUse 1.3.6.1.4.1.18.3.4.22.4.1.10
This indicates the current number of 8KB CPC (Continuous Packet Compression) Mode VC's using Hardware Compression services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp8kPpcContextsInUse 1.3.6.1.4.1.18.3.4.22.4.1.11
This indicates the number of PPC (Per Packet Compression) Mode VC's allocated for HW Compression. This value ALWAYS equates to 1, as 1 PPC Context is ALWAYS reserved as a resource for any VC doing HW Compression to use. All VC's configured to run in PPC Mode share this context. This context is also used when a VC enters Transient PPC Compression Mode, which occurs when frames are dropped or errors occur on the physical link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp32kContextsInUse 1.3.6.1.4.1.18.3.4.22.4.1.12
This indicates the current number of 32KB Context Control Blocks (CCBs) (i.e. VC's) using Hardware Compression services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp8kContextsAvailable 1.3.6.1.4.1.18.3.4.22.4.1.13
This indicates the number of 'usable' 8k Context Control Blocks available. Note that this will get reduced (by 4) when a user configures a VC for 32KB History Size (i.e. High Speed, Single Search Mode).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwComp32kContextsAvailable 1.3.6.1.4.1.18.3.4.22.4.1.14
This indicates the number of 'usable' 32k Context Control Blocks available. This means that this/these number of pages of Compression Memory currently have NO Context Control Block (i.e.VC) associated with them.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.15
This indicates the number of VC's which have registered for HW Compression and are using Continuous Packet Compression (CPC) mode. Anytime a VC/Context successfully registers with HW Compression using this mode, a HW context has been dedicated to that VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompPpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.16
This indicates the number of VC's which have registered for HW Compression and are using Packet by Packet Compression (PPC) mode. All VCs/Contexts which register using PPC mode, share 1 HW Context which has been dedicated for use by PPC Vcs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionTotalRingSize 1.3.6.1.4.1.18.3.4.22.4.1.17
This indicates the total number of Descriptor ring entries available for HW Compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompDecompressionTotalRingSize 1.3.6.1.4.1.18.3.4.22.4.1.18
This indicates the total number of Descriptor ring entries available for HW Decompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionCurrentQueued 1.3.6.1.4.1.18.3.4.22.4.1.19
This is a snapshot of the current number of entries outstanding on the HW Compression Ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompDecompressionCurrentQueued 1.3.6.1.4.1.18.3.4.22.4.1.20
This is a snapshot of the current number of entries outstanding on the HW Decompression Ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionQHiWatermark 1.3.6.1.4.1.18.3.4.22.4.1.21
This indicates the largest number of frames ever outstanding on the HW Compression Ring since this Compression Engine started providing HW Compression services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompDecompressionQHiWatermark 1.3.6.1.4.1.18.3.4.22.4.1.22
This indicates the largest number of frames ever outstanding on the HW Decompression Ring since this Compression Engine started providing HW Compression services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompCompressionPkts 1.3.6.1.4.1.18.3.4.22.4.1.23
The # of pkts successfully compressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionPkts 1.3.6.1.4.1.18.3.4.22.4.1.24
The # of pkts successfully decompressed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompTxExpandedPkts 1.3.6.1.4.1.18.3.4.22.4.1.25
The # of pkts given to the Compressor which actually expanded instead of compressing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompTxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.26
This indicates a temporary Buffer Starvation condition. When we cannot get a buffer to Compress into, this stat gets incremented & the original UnCompressed frame is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompRxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.27
The # of pkts received across the link which happened to come across the link uncompressed. This can be either because the pkt was an Expanded pkt at the remote end or for some reason the sending device could not compress this particular pkt due to resource issues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompRxDroppedPkts 1.3.6.1.4.1.18.3.4.22.4.1.28
This indicates a temporary Buffer Starvation condition. When we cannot get a buffer to Decompress into, this stat gets incremented & the received Compressed data frame is run through the Decompressor in order to update the Decompressors histories and then dropped.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompRxLcbMismatches 1.3.6.1.4.1.18.3.4.22.4.1.29
This indicates a frame was dropped between the remote end and this end. Line errors such as CRC Errors cause this. Buffer starvation in this router can also cause this.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionRingOverflows 1.3.6.1.4.1.18.3.4.22.4.1.30
Number of frames dropped due to Compression Descriptor Ring full condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionRingOverflows 1.3.6.1.4.1.18.3.4.22.4.1.31
Number of frames dropped due to Decompression Descriptor Ring full condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionErrors 1.3.6.1.4.1.18.3.4.22.4.1.32
Indicates the total # of Compression Errors detected on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionErrors 1.3.6.1.4.1.18.3.4.22.4.1.33
Indicates the total # of Decompression Errors detected on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionSrcPktLenErrors 1.3.6.1.4.1.18.3.4.22.4.1.34
A zero length source packet was received by the Compressor or Decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionCcbFormatErrors 1.3.6.1.4.1.18.3.4.22.4.1.35
The format of the specified Context Control Block (CCB) was detected to be in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionDescFormatErrors 1.3.6.1.4.1.18.3.4.22.4.1.36
The format of the current descriptor is in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompCompressionInternalErrors 1.3.6.1.4.1.18.3.4.22.4.1.37
The Compressor or Decompressor took an internal error when processing this descriptor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionSrcPktLenErrors 1.3.6.1.4.1.18.3.4.22.4.1.38
A zero length source packet was received by the Compressor or Decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionCcbFormatErrors 1.3.6.1.4.1.18.3.4.22.4.1.39
The format of the specified Context Control Block (CCB) was detected to be in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionDescFormatErrors 1.3.6.1.4.1.18.3.4.22.4.1.40
The format of the current descriptor is in error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompDecompressionInternalErrors 1.3.6.1.4.1.18.3.4.22.4.1.41
The Compressor or Decompressor took an internal error when processing this descriptor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompChipType 1.3.6.1.4.1.18.3.4.22.4.1.42
Compression Chip Type: MAGNALINK or ITCS
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER magna(1), itcs(2)  

wfHwCompMsaCpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.43
The number of MSA VC's which have registered for HW Compression and are using Continuous Packet Compression (CPC) mode. Anytime an MSA VC/Context successfully registers with HW Compression using this mode, a HW context has been dedicated to that VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompMsaPpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.44
The number of MSA VC's which have registered for HW Compression and are using Packet by Packet Compression (PPC) mode. All MSA VCs/Contexts which register using PPC mode, share 1 HW Context which has been dedicated for use by PPC Vcs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompMsa8KContextsGuaranteed 1.3.6.1.4.1.18.3.4.22.4.1.45
The number of 8K MSA contexts reserved with a particular memory carving. Calculated as number of pages guaranteed for MSA times 4, where 4 is the maximum number of 8K MSA contexts per page.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacContextsTotal 1.3.6.1.4.1.18.3.4.22.4.1.46
The maximum number of STAC CCBs that can be supported for a particular memory carving.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacCpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.47
This indicates the number of STAC VC's which have registered for HW Compression and are using Continuous Packet Compression (CPC) mode. Anytime a STAC VC/Context successfully registers with HW Compression using this mode, a HW context has been dedicated to that VC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacPpcContextsRegistered 1.3.6.1.4.1.18.3.4.22.4.1.48
The number of STAC VC's which have registered for HW Compression and are using Packet by Packet Compression (PPC) mode. All STAC VCs/Contexts which register using PPC mode, share 1 HW Context which has been dedicated for use by PPC Vcs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacPpcContextsInUse 1.3.6.1.4.1.18.3.4.22.4.1.49
The number of STAC contexts allocated for PPC. Equals 1 if STAC is enabled, 0 if it is disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacContextsAvailable 1.3.6.1.4.1.18.3.4.22.4.1.50
The number of 'usable' STAC context control blocks available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompStacContextsGuaranteed 1.3.6.1.4.1.18.3.4.22.4.1.51
The number of STAC contexts reserved with a particular memory carving. Calculated as number of pages guaranteed for STAC times 8, where 8 is the maximum number of STAC contexts per page.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wfHwCompMsaCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.52
The # of pkts successfully compressed using MSA compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompStacCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.53
The # of pkts successfully compressed using STAC compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompMsaDecompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.54
The # of pkts successfully decompressed using MSA compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompStacDecompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.55
The # of pkts successfully decompressed using STAC compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompMsaTxExpandedPkts 1.3.6.1.4.1.18.3.4.22.4.1.56
The # of pkts given to the Compressor which actually expanded instead of compressing using MSA compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompStacTxExpandedPkts 1.3.6.1.4.1.18.3.4.22.4.1.57
The # of pkts given to the Compressor which actually expanded instead of compressing using STAC compression algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompMsaTxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.58
This indicates a temporary Buffer Starvation condition. When we cannot get a buffer to Compress into, this stat gets incremented & the original UnCompressed frame is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompStacTxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.59
This indicates a temporary Buffer Starvation condition. When we cannot get a buffer to Compress into, this stat gets incremented & the original UnCompressed frame is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompMsaRxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.60
The # of pkts received across the link which happened to come across the link uncompressed. This can be either because the pkt was an Expanded pkt at the remote end or for some reason the sending device could not compress this particular pkt due to resource issues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfHwCompStacRxNonCompressedPkts 1.3.6.1.4.1.18.3.4.22.4.1.61
The # of pkts received across the link which happened to come across the link uncompressed. This can be either because the pkt was an Expanded pkt at the remote end or for some reason the sending device could not compress this particular pkt due to resource issues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitTable 1.3.6.1.4.1.18.3.4.22.6
The circuit table contains circuit entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WfStacCircuitEntry

wfStacCircuitEntry 1.3.6.1.4.1.18.3.4.22.6.1
The components of the instance ID of a circuit entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WfStacCircuitEntry  

wfStacCircuitDelete 1.3.6.1.4.1.18.3.4.22.6.1.1
Indication to delete this Stac LZS/PPP interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfStacCircuitDisable 1.3.6.1.4.1.18.3.4.22.6.1.2
Used to enable and disable compression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfStacCircuitId 1.3.6.1.4.1.18.3.4.22.6.1.3
Indicates the circuit ID of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wfStacCircuitEngineType 1.3.6.1.4.1.18.3.4.22.6.1.4
Indicates whether to use hardware or software compression
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER software(1), hardware(2), inherit(3), none(4)  

wfStacCircuitCompressionMode 1.3.6.1.4.1.18.3.4.22.6.1.5
Indicates the check mode. See RFC 1974.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mode0(1), mode3(4)  

wfStacCircuitCompressorState 1.3.6.1.4.1.18.3.4.22.6.1.6
Indicates the compressor state of this circuit entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER data(1), disabled(2)  

wfStacCircuitDecompressorState 1.3.6.1.4.1.18.3.4.22.6.1.7
Indicates the decompressor state of this circuit entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER data(1), disabled(2), reset(3)  

wfStacCircuitFallBackCompressionMode 1.3.6.1.4.1.18.3.4.22.6.1.8
This attribute is only relevant when any the circuit on that line is unable to register for HW Compression due to a lack of physical HW Context memory (Note that only HW CPC contexts can fail registration in this way).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER softwarecpc(1), none(2)  

wfStacCircuitCompressorInBytes 1.3.6.1.4.1.18.3.4.22.6.1.9
Indicates the number of bytes submitted to the compressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitCompressorOutBytes 1.3.6.1.4.1.18.3.4.22.6.1.10
Indicates the number of bytes produced by the compressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitDecompressorInBytes 1.3.6.1.4.1.18.3.4.22.6.1.11
Indicates the number of bytes submitted to the decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitDecompressorOutBytes 1.3.6.1.4.1.18.3.4.22.6.1.12
Indicates the number of bytes produced by the decompressor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitTxMode0Packets 1.3.6.1.4.1.18.3.4.22.6.1.13
Indicates the number of mode 0 packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitRxMode0Packets 1.3.6.1.4.1.18.3.4.22.6.1.14
Indicates the number of mode 0 packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitTxMode3Packets 1.3.6.1.4.1.18.3.4.22.6.1.15
Indicates the number of mode 3 packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitRxMode3Packets 1.3.6.1.4.1.18.3.4.22.6.1.16
Indicates the number of mode 3 packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitTxExpPackets 1.3.6.1.4.1.18.3.4.22.6.1.17
Indicates the number of expanded packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitRxExpPackets 1.3.6.1.4.1.18.3.4.22.6.1.18
Indicates the number of expanded packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitTxResetReqs 1.3.6.1.4.1.18.3.4.22.6.1.19
Indicates the number of reset requests sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

wfStacCircuitRxResetReqs 1.3.6.1.4.1.18.3.4.22.6.1.20
Indicates the number of reset requests received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter